This document provides product specifications for a CaP F MALE CONNECTOR. The connector is suitable for cables with inner conductors from 0.3 to 1.1 mm, has impedances of 50-75-92 ohms, and operates at frequencies up to 3 GHz. It has screening attenuation greater than -80 dB and return loss greater than -24 dB at 3 GHz. The connector body is made from a protected plastic compound that has a tensile strength of 17 MPa and is halogen free and UV protected.

1. PRODUCT DATASHEET
CaP
Connettore a Pressione
CaP System
F MALE CONNECTOR
Stripping Dimension:
Utilize
these Tools
Suitable for Cables:
RG6, RG59, RG178, ... suitable for all cable with inner
conductor from Ø 0,3 up to Ø 1,1 mm (from AWG 28 to
AWG 18)
Electrical Specification
Impedance:
Frequency:
Dielectric W/V:
Insulation res:
Insertion Loss:
Return Loss:
Screening Attenuation:
Return Loss:
dB
-10.00
-20.00
-30.00
Mechanical Specification
-40.00
-50.00
-60.00
1
Screening Attenuation:
2
3 GHz
dB
-40.00
-60.00
UV rays protection:
Flammability test:
Halogen Free:
Operating Temp:
(85 dB)
(95 dB)
(105 dB)
-120.0
-140.0
1
2
Body Material:
Tensile Strength:
Elongation at Break:
Tear Strength:
Weight:
Protected Plastic Compound
17 MPa
650 %
80 N/mm
1,0 g
Environmental Specification
EN 50117 Screening Class A++
-80.00
-100.0
50 - 75 - 92 Ohm
0-3 GHz
1500 Veff
5000 M-Ohm
<0,015 dB @ 3 GHz
> 24 dB @ 3 GHz
Class A+
3 GHz
YES
UL 94/HB
VDE 0472
- 40 ÷ + 120 °
All measures are in millimeters
TELECOM & SECURITY: Viale Stefano Tinozzi, snc - Zona Ind.le Interporto d’Abruzzo - I-65024 Manoppello (PE) - ITALY
Tel. +39.085.8569020 - Fax +.39.085.8569707 - www.telecomsecurity.it - info@telecomsecurity.it - Skype: telecomsecurity_info
Technical data and characteristics are not binding an may be changed without prior notice