DO Transmitter : DO-TX-22
•
1 like•129 views
This document provides technical specifications for a gas sensor including: - It measures gas concentrations from 0 to 20.9 PPM and provides an output of 4 to 20 mA. - It has a response time of less than 10 mSec for a 10 to 90% output change and operates from 0 to 50°C. - Additional parameters specified include power supply, cable length, linearity, materials of construction, and warranty information.
Report
Share
Report
Share
Download to read offline
Recommended
PTP35
The document provides technical specifications for the Ceraphant T PTP35, a hygienic pressure switch for monitoring pressures in applications like food and beverage. It lists the switch's features such as stainless steel housing, pressure ranges from vacuum to 40 bar, and electrical outputs. Price tables are included showing pricing that decreases as more units are ordered.
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...Thorne & Derrick International
Martindale Electric owns Metrohm low voltage products. The Martindale Electric product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring and safely prove dead.
Martindale Electric has always been a pioneer in test equipment. Martindale Electric firsts include:
The first ever socket tester
The first safety insulation tester
The first self proving non-contact voltage indicator
The first low cost fuse finder
The first non-trip, no battery, no test button, loop tester displaying PE, PN PFC & PSC
The first handheld insulation tester with polarisation index
The first advanced socket tester, as defined by the Health and Safety Executive
The smallest and lightest handheld PAT Tester
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...Thorne & Derrick International
Metrohm MET7A501C Safety Insulation Tester
LV HV Electrical Testing
Electrical Safety Testing In Hazardous Areas
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Description
Martindale Electric Metrohm MET7A501C Safety Insulation Tester was originally designed for use in hazardous areas, such as mines and petrol sites. However, due to the new ATEX regulations, the device no longer meets the requirements for intrinsically safe products - BUT this product has been in active service for 45 years in hazardous areas, in the presence of methane, ammonia and hydrocarbons.
The Metrohn MET7A501C is a one of a kind tester and fully meets the ATEX requirements, therefore the use of this tester should be decided upon by a suitably qualified and knowledgeable person. Whilst the MET7A501C safety insuation tester does not qualify for ATEX approval, safety officers should evaluate the risks of failing to perform adequate electrical safety testing.
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Specifications
Insulation Range: 0 - 50MΩ
Test Voltage: 500V DC +/- 10% across 1MΩ
Short Circuit Current: <2ma><26mA
Continuity Accuracy: +/- 1.6mm of scale arc length
Complies With: BS1259
Supply: 1.5V AA IEC batteries
Housing: Shatterproof ABS case
Dimensions: 32 x 82 x 60mm
Weight: 600g approx
Operating Temperature: 0 to 40°C
Storage Temperature: -20°C to 60°C
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Contents
Case, test leads (DFK0113)
Safety tool to remove battery cover
Instruction manualchenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outd...
chenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outdoor Use (12V 400W)
Description: IP63 AC 170V-264V To DC 12v/24V 400W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 24V 400W Shell Material: Aluminum
Protection: Shortcircuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
Codatron ht high voltage regulators
Codatron ht high voltage regulatorsCodatron ht high voltage regulatorsGeneral Description – Oil 4 Less®
LLC is the sole exclusive manufacturer of the
Codatron®
HT high voltage shunt regulators. They are designed to give superior regulation
over rapid temperature changes, and are for use in high temperature environments. The
regulation of the Codatron®
HT over rapid temperature changes is superior to any other
currently manufactured high voltage regulator. The Codatron®
HT regulator acts like a
high voltage zener, but with low noise and a low temperature coefficient (TC). The
regulated voltages offered include those available for the original, now discontinued,
Victoreen Corotron, and many more. The Codatron®
HT regulator has been optimized to
operate at approximately 60 microamps, the current favored by many well logging tool
technicians, but functions well over a wide range of currents up to a maximum current
rating of 500 microamps. A much higher pulse or transient current rating is allowed due to
the unique electrical characteristics of the Codatron HT. A
Uniohm resistors datasheet high quality anti-sulfurized thick film chip resis...
This Uniohm resistors datasheet for car 1%-5%, high quality anti-sulfurized thick film chip resistor, nq02~nq12 series. Allchips is the authorized distributor of Uniohm.
UNIOHM recommend the storage condition temperature: 15℃~35℃, humidity :25%~75%.
(Put condition for individual product).
Even under UNIOHM recommended storage condition, solderability of products over 1 year old.
(Put condition for each product) may be degraded.
Store / transport cartons in the correct direction, which is indicated on a carton as a symbol.
Otherwise bent leads may occur due to excessive stress applied when dropping of a carton.
Product performance and soldered connections may deteriorate if the products are stored in the following places:
a. Storage in high Electrostatic.
b. Storage in direct sunshine、rain and snow or condensation.
PTC31 - PTP31
This document provides information on the Ceraphant T PTC31/PTP31 pressure switch, including an overview of its applications and functions, technical specifications, dimensions, electrical connections, and price tables. The pressure switch is designed to monitor and control absolute and gauge pressures in non-hazardous applications, and is available with ceramic or metallic measuring cells and a range of process connections and measuring ranges from vacuum to 600 psi and 4000 psi, respectively. It has switch outputs, accuracy of less than 0.5%, an IP65/66 rating, and a stainless steel housing.
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
Recommended
PTP35
The document provides technical specifications for the Ceraphant T PTP35, a hygienic pressure switch for monitoring pressures in applications like food and beverage. It lists the switch's features such as stainless steel housing, pressure ranges from vacuum to 40 bar, and electrical outputs. Price tables are included showing pricing that decreases as more units are ordered.
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...
Martindale Electric Metrohm Flash Testers & Insulation Testers - MET7A501 Saf...Thorne & Derrick International
Martindale Electric owns Metrohm low voltage products. The Martindale Electric product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring and safely prove dead.
Martindale Electric has always been a pioneer in test equipment. Martindale Electric firsts include:
The first ever socket tester
The first safety insulation tester
The first self proving non-contact voltage indicator
The first low cost fuse finder
The first non-trip, no battery, no test button, loop tester displaying PE, PN PFC & PSC
The first handheld insulation tester with polarisation index
The first advanced socket tester, as defined by the Health and Safety Executive
The smallest and lightest handheld PAT Tester
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...
Martindale Electric Metrohm MET7A501C Safety Insulation Tester - Martindale E...Thorne & Derrick International
Metrohm MET7A501C Safety Insulation Tester
LV HV Electrical Testing
Electrical Safety Testing In Hazardous Areas
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Description
Martindale Electric Metrohm MET7A501C Safety Insulation Tester was originally designed for use in hazardous areas, such as mines and petrol sites. However, due to the new ATEX regulations, the device no longer meets the requirements for intrinsically safe products - BUT this product has been in active service for 45 years in hazardous areas, in the presence of methane, ammonia and hydrocarbons.
The Metrohn MET7A501C is a one of a kind tester and fully meets the ATEX requirements, therefore the use of this tester should be decided upon by a suitably qualified and knowledgeable person. Whilst the MET7A501C safety insuation tester does not qualify for ATEX approval, safety officers should evaluate the risks of failing to perform adequate electrical safety testing.
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Specifications
Insulation Range: 0 - 50MΩ
Test Voltage: 500V DC +/- 10% across 1MΩ
Short Circuit Current: <2ma><26mA
Continuity Accuracy: +/- 1.6mm of scale arc length
Complies With: BS1259
Supply: 1.5V AA IEC batteries
Housing: Shatterproof ABS case
Dimensions: 32 x 82 x 60mm
Weight: 600g approx
Operating Temperature: 0 to 40°C
Storage Temperature: -20°C to 60°C
Martindale Electric Metrohm MET7A501C Safety Insulation Tester Contents
Case, test leads (DFK0113)
Safety tool to remove battery cover
Instruction manualchenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outd...
chenglian Ac-Dc 12V LED Power Supply 400W 33A Constant Voltage Rainproof Outdoor Use (12V 400W)
Description: IP63 AC 170V-264V To DC 12v/24V 400W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 24V 400W Shell Material: Aluminum
Protection: Shortcircuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
Codatron ht high voltage regulators
Codatron ht high voltage regulatorsCodatron ht high voltage regulatorsGeneral Description – Oil 4 Less®
LLC is the sole exclusive manufacturer of the
Codatron®
HT high voltage shunt regulators. They are designed to give superior regulation
over rapid temperature changes, and are for use in high temperature environments. The
regulation of the Codatron®
HT over rapid temperature changes is superior to any other
currently manufactured high voltage regulator. The Codatron®
HT regulator acts like a
high voltage zener, but with low noise and a low temperature coefficient (TC). The
regulated voltages offered include those available for the original, now discontinued,
Victoreen Corotron, and many more. The Codatron®
HT regulator has been optimized to
operate at approximately 60 microamps, the current favored by many well logging tool
technicians, but functions well over a wide range of currents up to a maximum current
rating of 500 microamps. A much higher pulse or transient current rating is allowed due to
the unique electrical characteristics of the Codatron HT. A
Uniohm resistors datasheet high quality anti-sulfurized thick film chip resis...
This Uniohm resistors datasheet for car 1%-5%, high quality anti-sulfurized thick film chip resistor, nq02~nq12 series. Allchips is the authorized distributor of Uniohm.
UNIOHM recommend the storage condition temperature: 15℃~35℃, humidity :25%~75%.
(Put condition for individual product).
Even under UNIOHM recommended storage condition, solderability of products over 1 year old.
(Put condition for each product) may be degraded.
Store / transport cartons in the correct direction, which is indicated on a carton as a symbol.
Otherwise bent leads may occur due to excessive stress applied when dropping of a carton.
Product performance and soldered connections may deteriorate if the products are stored in the following places:
a. Storage in high Electrostatic.
b. Storage in direct sunshine、rain and snow or condensation.
PTC31 - PTP31
This document provides information on the Ceraphant T PTC31/PTP31 pressure switch, including an overview of its applications and functions, technical specifications, dimensions, electrical connections, and price tables. The pressure switch is designed to monitor and control absolute and gauge pressures in non-hazardous applications, and is available with ceramic or metallic measuring cells and a range of process connections and measuring ranges from vacuum to 600 psi and 4000 psi, respectively. It has switch outputs, accuracy of less than 0.5%, an IP65/66 rating, and a stainless steel housing.
CMA05MT101 SPEC
This document provides specifications for a product including:
1. Electrical characteristics such as a rated voltage of 50V Typ, insulation resistance of 10 MΩ Min, and withstand voltage of 125V Typ.
2. Mechanical dimensions and a marking of "N/A".
3. Performance curves and test frequency of 100 MHz/0.5V.
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
FTC260 - FTC262
The document provides technical specifications for the Minicap FTC260 and FTC262 capacitive point level switches for bulk solids. Key details include the switches' output options of relay or PNP, operating temperature and pressure ranges, accuracy and hysteresis values. Application examples are given for various grains, minerals, plastics and their densities. Dimensions, electrical connections, and price tables are also included.
HNT2510MT3R3 SPEC 20141201
This document provides specifications for an inductor component including:
- Isat will drop 30% from its value when a 2 second current is applied, and 45% from its momentary 1 second current value.
- Irms allows a maximum 40°C rise above a 25°C ambient temperature.
- Electrical characteristics include typical and maximum values for inductance, DCR, Isat, and Irms.
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
HNT2510MT2R2 SPEC 20140516
This document provides specifications for an electronic component, including mechanical dimensions, electrical characteristics, and test conditions. It lists items like inductance, DCR, current rating, and operating temperature range. It also provides measurements taken like inductance values and notes packaging markings and part number identification for the approved sample.
Chenglian ip63-rainproof-power-supply-300 w-12v
chenglian Ac-Dc 12V LED Power Supply 300W 25A Constant Voltage Rainproof Outdoor Use (12V 300W)
Description: IP63 AC 170V-264V To DC 12v/24V 300W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 12V 300W Shell Material: Aluminum
Protection: Short circuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
Cable test set_easytest_20_kv
The Easytest 20 kV is a compact and lightweight AC cable tester that provides reliable testing of cables after installation or repair. It can test cables up to 2 km in length at voltages up to 20 kV AC, avoiding the issues with polarisation that occur with DC testing. The Easytest has configurable test sequences and can store test results, making it useful for quality assurance after cable work.
TeSys D control relay Auxiliary contactor-控制继电器接触器辅助-제어 릴레이 보조 접촉기
telemecanique relay
TeSys D control relay Auxiliary contactor
send enquiry to mail@akbartrading.com
控制继电器接触器辅助-제어 릴레이 보조 접촉기
Heb new
This document provides information about low ohm battery shunt resistors made by HTR, including:
- Physical dimensions and tolerances for various models ranging from 15W to 50W power ratings.
- Electrical characteristics like resistance tolerance, temperature range, and life test performance.
- Applications for current sensing in vehicles, welders, and bus bars.
- Packaging and storage specifications.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
CMA05YT600D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and current characteristics. 2. Key electrical specs include insulation resistance of 10MΩ minimum, an operating temperature range of -25°C to 85°C, and a rated voltage of 20V. 3. Current is limited to 300mA maximum and DCR is specified at 0.3Ω maximum when measured at 100MHz with 0.5V.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
SAR05030MT2R2-OK
The document provides specifications for an electronic component including:
1. Electrical characteristics such as inductance of 2.2uH ±20% at 100KHz/1V, saturation current of 5.5A typical and 7.5A maximum, and DC resistance of 25mΩ typical and 29mΩ maximum.
2. Mechanical dimensions, operating temperature range of -25°C to +125°C, and manufacturer contact information.
3. The part number SAR05030MT2R2 and approval specification for the component.
ComNet PS48VDC-5A Data Sheet
Buy the ComNet PS48VDC-5A at JMAC Supply.
http://www.jmac.com/ComNet_PS48VDC_5A_p/comnet-ps48vdc-5a.htm?=slideshare
Martindale Electric Metrohm METE3640 4kV Flash Tester - Martindale Electric M...
Martindale Electric Metrohm METE3640 4kV Flash Tester - Martindale Electric M...Thorne & Derrick International
Metrohm METE3640 4kV Flash Tester
LV HV Electrical Testing
Digital Flash Tester
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm METE3640 4kV Flash Tester Description
The Metrohm E3640 is a 4kV AC flash tester is capable of operating from either a 115V or 230V supply, at 50 or 60Hz. the Metrohm E3640 has a twin 3 1/2 digit LCD display which shows both output voltage and leakage current. The Metrohm flash tester device is built into a robust carry case, making it easily portable.
The Metrohm E3640 is a 4kV AC flash tester has three modes of operation, where the fail lamp on the E3640 illuminates and a buzzer will sound:
1. Trip: will trip when a pre-determined current is exceeded
2. Breakdown: fast transients can trigger the trip
3. Burn: where the trip function is by-passed and the fault current flows continuously to expose the fault
Martindale Electric Metrohm METE3640 4kV Flash Tester Specifications
Power Requirement: 115 / 230V +/- 15%, 50/60Hz, 40VA
Fuses: 230V: 5 x 20mm 0.25A, HBC, Type F
115V: 5 x 20mm 0.5A, HBC, Type F
Output Voltage Range: 0 - 2.2, 0 - 4.2kV 50 / 60Hz AC
Accuracy: +/- 2% of reading +/- 1 digit
Leakage Current: 0 - 5mA (nominal), 50 / 60Hz in 10µA steps
Accuracy: +/- 2% reading, +/- 1 digit
Trip Level Range: 0 to 3mA 50 / 60Hz
Setting Accuracy: +/- 5% of full range
Trip Response Leakage: Will trip for fault duration >5mS but not for <100µS
Breakdown: Will trip for fast transients of 30µS and above
Complies with: EMC to BS EN 50081-1 & BS EN 50082-2
Safety & Flash Test: BS EN 61010-1
Dimensions: 330 x 263 x 144mm
Weight: 4kg approx
Martindale Electric Metrohm METE3640 4kV Flash Tester Contents
Metrohm METE3640 4kV Flash Tester
Flash gun
Earth lead
Mains power lead
Instruction manualDienhathe.com cam bien-quang_fotek_a3
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
ML02ST4N7 SPEC
This document provides specifications for an inductor component including electrical characteristics, mechanical dimensions, and marking. Key specifications include an inductance of 4.7nH ± 0.3nH, self-resonant frequency of 7010 MHz typical and 6000 MHz minimum, DC resistance of 0.11Ω typical, and maximum operating temperature of -55°C to 125°C. Contact and product number information is also listed for the Taiwanese manufacturer.
SAR05030MT3R3-OK
The document provides specifications for an electronic component including:
1. Electrical characteristics such as inductance of 3.3uH ±20% at 100KHz/1V, saturation current of 5.0A typical and 6.0A maximum, and DC resistance of 32mΩ typical and 38mΩ maximum.
2. Mechanical dimensions and operating temperature range of -25°C to +125°C.
3. Manufacturer name and contact information.
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This document provides specifications for HTR's OF series of open frame, monolithic construction, current sense/low ohm resistors. It includes details on physical dimensions, power ratings from 1W to 10W, resistance values from R001 to R10, and temperature coefficient ratings. The document describes the different mounting tag configurations and provides application notes on selecting the appropriate tag based on resistance value and current requirements. It also includes electrical, environmental, and mechanical performance specifications for the resistors.
SAR07030MT2R2-OK
This document provides specifications for an electronic component including:
- Electrical characteristics such as inductance of 2.2uH ±20% at 100KHz/1V, current ratings of 8A typical and 10A maximum, and resistance ratings of 13.5mΩ typical and 15mΩ maximum.
- Contact information for the manufacturer including address and phone/fax numbers.
- Additional information on operating temperature range, markings, and mechanical dimensions.
Quantum devices qm35 spec
The document describes the Quantum Devices QM35 optical encoder. It has a bearingless modular design with resolutions up to 8192 lines per revolution. It features a low-profile assembled height, lock-n-twist assembly, through shaft sizes up to 0.375 inches, and hermetically sealed LED. The encoder provides high performance for OEM applications and various commutation and electrical configuration options.
2 u 650w single power supply
This document provides specifications for an EPS2U 650W power supply model EP2A5651A-B. It includes details on the power supply's input/output electrical specifications, environmental requirements, safety certifications, and labeling. The power supply has an input voltage range of 90-264VAC and can provide up to 650W of continuous power on its regulated outputs of +3.3V, +5V, +12V, -12V and +5VSB. It meets various EMI and safety standards and is rated to operate from 0-50°C with 5-95% humidity.
More Related Content
What's hot
CMA05MT121 SPEC
This document provides specifications for an electronic component. It includes:
1) Measurements for items A through F in a table with units of mm and tolerances ranging from ±0.1 to ±0.2.
2) Electrical characteristics including insulation resistance of 10MΩ minimum, withstanding voltage of 125V typical, an operating temperature range of -25°C to 85°C, and a rated voltage of 50V typical.
3) Additional specifications for DCR at 100MHz/0.5V of 0.3Ω maximum, and a typical cut-off frequency of 1.0GHz.
FTC260 - FTC262
The document provides technical specifications for the Minicap FTC260 and FTC262 capacitive point level switches for bulk solids. Key details include the switches' output options of relay or PNP, operating temperature and pressure ranges, accuracy and hysteresis values. Application examples are given for various grains, minerals, plastics and their densities. Dimensions, electrical connections, and price tables are also included.
HNT2510MT3R3 SPEC 20141201
This document provides specifications for an inductor component including:
- Isat will drop 30% from its value when a 2 second current is applied, and 45% from its momentary 1 second current value.
- Irms allows a maximum 40°C rise above a 25°C ambient temperature.
- Electrical characteristics include typical and maximum values for inductance, DCR, Isat, and Irms.
Datasheet CaP COL
Pressure-on Connector, for all coaxial cables up to 7 mm diameter. This product is worldwide patented. It is simple and quick, economical, reusable and recyclable, made in Italy, mechanically strong and electronically superior. It is available in 9 different colours.
Passing band: 0 – 6000 MHz
HNT2510MT2R2 SPEC 20140516
This document provides specifications for an electronic component, including mechanical dimensions, electrical characteristics, and test conditions. It lists items like inductance, DCR, current rating, and operating temperature range. It also provides measurements taken like inductance values and notes packaging markings and part number identification for the approved sample.
Chenglian ip63-rainproof-power-supply-300 w-12v
chenglian Ac-Dc 12V LED Power Supply 300W 25A Constant Voltage Rainproof Outdoor Use (12V 300W)
Description: IP63 AC 170V-264V To DC 12v/24V 300W Switching Power Supply Driver Adapter Specification
: Input Voltage: 170V-264V Output Voltage: 12V 300W Shell Material: Aluminum
Protection: Short circuit protection,Overload Protection, Over current Protection Widely used in Industrial automation, LED strips, LED modules, moving signs, building decorations. Working Temperature: -30~50℃
Cable test set_easytest_20_kv
The Easytest 20 kV is a compact and lightweight AC cable tester that provides reliable testing of cables after installation or repair. It can test cables up to 2 km in length at voltages up to 20 kV AC, avoiding the issues with polarisation that occur with DC testing. The Easytest has configurable test sequences and can store test results, making it useful for quality assurance after cable work.
TeSys D control relay Auxiliary contactor-控制继电器接触器辅助-제어 릴레이 보조 접촉기
telemecanique relay
TeSys D control relay Auxiliary contactor
send enquiry to mail@akbartrading.com
控制继电器接触器辅助-제어 릴레이 보조 접촉기
Heb new
This document provides information about low ohm battery shunt resistors made by HTR, including:
- Physical dimensions and tolerances for various models ranging from 15W to 50W power ratings.
- Electrical characteristics like resistance tolerance, temperature range, and life test performance.
- Applications for current sensing in vehicles, welders, and bus bars.
- Packaging and storage specifications.
HNT5040MT3R3 20160108
This document contains specifications for an electronic component. It includes:
1. Electrical characteristics such as current and inductance ratings.
2. Mechanical dimensions.
3. Manufacturing details like part number, manufacturer contact information, and approval specifications.
CMA05YT600D SPEC
1. The document provides specifications for an electronic component including its electrical characteristics, mechanical dimensions, and current characteristics. 2. Key electrical specs include insulation resistance of 10MΩ minimum, an operating temperature range of -25°C to 85°C, and a rated voltage of 20V. 3. Current is limited to 300mA maximum and DCR is specified at 0.3Ω maximum when measured at 100MHz with 0.5V.
HANS-S
This document provides specifications for noise suppressor resistors intended for use in automotive ignition systems. It lists 6 resistor types with values ranging from 1K0 to 10K and tolerances of 20%, 10%, and 5%. The resistors are wire wound and have minimum inductance values of 15uH at 1MHz. Dimensions and electrical specifications are provided. The resistors are designed to reduce radio frequency interference caused by electrical discharges in petrol engines.
SAR05030MT2R2-OK
The document provides specifications for an electronic component including:
1. Electrical characteristics such as inductance of 2.2uH ±20% at 100KHz/1V, saturation current of 5.5A typical and 7.5A maximum, and DC resistance of 25mΩ typical and 29mΩ maximum.
2. Mechanical dimensions, operating temperature range of -25°C to +125°C, and manufacturer contact information.
3. The part number SAR05030MT2R2 and approval specification for the component.
ComNet PS48VDC-5A Data Sheet
Buy the ComNet PS48VDC-5A at JMAC Supply.
http://www.jmac.com/ComNet_PS48VDC_5A_p/comnet-ps48vdc-5a.htm?=slideshare
Martindale Electric Metrohm METE3640 4kV Flash Tester - Martindale Electric M...
Martindale Electric Metrohm METE3640 4kV Flash Tester - Martindale Electric M...Thorne & Derrick International
Metrohm METE3640 4kV Flash Tester
LV HV Electrical Testing
Digital Flash Tester
Martindale Electric Flash Testers & Insulation Testers
Martindale Electric Metrohm METE3640 4kV Flash Tester Description
The Metrohm E3640 is a 4kV AC flash tester is capable of operating from either a 115V or 230V supply, at 50 or 60Hz. the Metrohm E3640 has a twin 3 1/2 digit LCD display which shows both output voltage and leakage current. The Metrohm flash tester device is built into a robust carry case, making it easily portable.
The Metrohm E3640 is a 4kV AC flash tester has three modes of operation, where the fail lamp on the E3640 illuminates and a buzzer will sound:
1. Trip: will trip when a pre-determined current is exceeded
2. Breakdown: fast transients can trigger the trip
3. Burn: where the trip function is by-passed and the fault current flows continuously to expose the fault
Martindale Electric Metrohm METE3640 4kV Flash Tester Specifications
Power Requirement: 115 / 230V +/- 15%, 50/60Hz, 40VA
Fuses: 230V: 5 x 20mm 0.25A, HBC, Type F
115V: 5 x 20mm 0.5A, HBC, Type F
Output Voltage Range: 0 - 2.2, 0 - 4.2kV 50 / 60Hz AC
Accuracy: +/- 2% of reading +/- 1 digit
Leakage Current: 0 - 5mA (nominal), 50 / 60Hz in 10µA steps
Accuracy: +/- 2% reading, +/- 1 digit
Trip Level Range: 0 to 3mA 50 / 60Hz
Setting Accuracy: +/- 5% of full range
Trip Response Leakage: Will trip for fault duration >5mS but not for <100µS
Breakdown: Will trip for fast transients of 30µS and above
Complies with: EMC to BS EN 50081-1 & BS EN 50082-2
Safety & Flash Test: BS EN 61010-1
Dimensions: 330 x 263 x 144mm
Weight: 4kg approx
Martindale Electric Metrohm METE3640 4kV Flash Tester Contents
Metrohm METE3640 4kV Flash Tester
Flash gun
Earth lead
Mains power lead
Instruction manualDienhathe.com cam bien-quang_fotek_a3
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
ML02ST4N7 SPEC
This document provides specifications for an inductor component including electrical characteristics, mechanical dimensions, and marking. Key specifications include an inductance of 4.7nH ± 0.3nH, self-resonant frequency of 7010 MHz typical and 6000 MHz minimum, DC resistance of 0.11Ω typical, and maximum operating temperature of -55°C to 125°C. Contact and product number information is also listed for the Taiwanese manufacturer.
SAR05030MT3R3-OK
The document provides specifications for an electronic component including:
1. Electrical characteristics such as inductance of 3.3uH ±20% at 100KHz/1V, saturation current of 5.0A typical and 6.0A maximum, and DC resistance of 32mΩ typical and 38mΩ maximum.
2. Mechanical dimensions and operating temperature range of -25°C to +125°C.
3. Manufacturer name and contact information.
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
This document provides specifications for HTR's OF series of open frame, monolithic construction, current sense/low ohm resistors. It includes details on physical dimensions, power ratings from 1W to 10W, resistance values from R001 to R10, and temperature coefficient ratings. The document describes the different mounting tag configurations and provides application notes on selecting the appropriate tag based on resistance value and current requirements. It also includes electrical, environmental, and mechanical performance specifications for the resistors.
SAR07030MT2R2-OK
This document provides specifications for an electronic component including:
- Electrical characteristics such as inductance of 2.2uH ±20% at 100KHz/1V, current ratings of 8A typical and 10A maximum, and resistance ratings of 13.5mΩ typical and 15mΩ maximum.
- Contact information for the manufacturer including address and phone/fax numbers.
- Additional information on operating temperature range, markings, and mechanical dimensions.
What's hot (20)
TeSys D control relay Auxiliary contactor-控制继电器接触器辅助-제어 릴레이 보조 접촉기
TeSys D control relay Auxiliary contactor-控制继电器接触器辅助-제어 릴레이 보조 접촉기
Martindale Electric Metrohm METE3640 4kV Flash Tester - Martindale Electric M...
Martindale Electric Metrohm METE3640 4kV Flash Tester - Martindale Electric M...
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
HTR India - Products - Current Sense Resistors - Current Sense Open Frame Res...
Similar to DO Transmitter : DO-TX-22
Quantum devices qm35 spec
The document describes the Quantum Devices QM35 optical encoder. It has a bearingless modular design with resolutions up to 8192 lines per revolution. It features a low-profile assembled height, lock-n-twist assembly, through shaft sizes up to 0.375 inches, and hermetically sealed LED. The encoder provides high performance for OEM applications and various commutation and electrical configuration options.
2 u 650w single power supply
This document provides specifications for an EPS2U 650W power supply model EP2A5651A-B. It includes details on the power supply's input/output electrical specifications, environmental requirements, safety certifications, and labeling. The power supply has an input voltage range of 90-264VAC and can provide up to 650W of continuous power on its regulated outputs of +3.3V, +5V, +12V, -12V and +5VSB. It meets various EMI and safety standards and is rated to operate from 0-50°C with 5-95% humidity.
Positive Displacement type Flow Sensor with Filter
We have varieties of Liquid Flow Sensors. Turbine type Flow Sensors and PD type Flow Sensors are in our scope of supply
K48 Controller
This document provides installation and operation instructions for the TECNOLOGIC K48 series temperature controller. It outlines:
1) Mounting requirements for the controller, including ambient temperature and humidity limits.
2) Wiring diagrams and notes for different input types (thermocouples, RTDs, etc.), outputs (relays, SSRs), power supply, and logic inputs.
3) Technical specifications for the controller, including accuracy, display, sampling rate, and certifications.
4) Procedures for configuring the controller, including accessing parameters via passwords and navigating groups to set input type, control strategy, alarms and other functions.
Acs712
The document describes an integrated current sensor that provides precise current sensing for industrial and commercial applications. It features low noise analog signal conditioning, adjustable bandwidth via an external filter pin, and 5 microsecond rise time. The sensor outputs a voltage proportional to AC or DC current in a range of ±5, ±20, or ±30 amps, with 1.5% maximum error and 80 kHz bandwidth. It is provided in a small SOIC8 package.
Twdlcaa40
This document provides technical specifications for the Twido compact PLC base including its discrete I/O capabilities, power supply information, communication interfaces, memory details, and environmental operating conditions. It describes the product's discrete input and output characteristics such as voltage limits, current draw, filter times, and durability. The document also lists certifications and environmental specifications for operating temperature, humidity, vibration resistance, and shock tolerance.
Integrating sphere-and-ccd-spectroradiometer-system
This document provides information on Lisun Electronics' line of lighting test instruments, including a CCD spectroradiometer, integrating spheres, power meters, and other accessories. It lists the company's locations and contact information and describes the components of its LED measurement systems for testing full LED luminaires and single LED chips. Standards-compliant measurements include colorimetric values, photometric flux, and electrical parameters.
Integrating sphere-and-ccd-spectroradiometer-system
This document provides information on Lisun Electronics' line of lighting test instruments, including a CCD spectroradiometer, integrating spheres, power meters, and other accessories. It lists the company's locations and contact information and then describes each product's specifications and applications for testing LED luminaires and single LEDs according to industry standards. The line includes systems for measuring light intensity, spectrum, color, and electrical characteristics of lighting products.
Acs712 sensor-arus
The ACS712 is a linear current sensor that outputs an analog voltage signal proportional to the sensed current. It senses current flowing through a copper conductor near the die and converts it to a voltage using an integrated Hall IC. It provides electrical isolation between the current input pins and other pins. Typical applications include motor control, load detection, and overcurrent protection.
Electronic ballast-tester
Lisun WT5000 meets the latest requirmentsfor electronic ballasts in international standards IEC 60929, IEC 60969, IEC 61000-3-2, GB/T15144-2005, GB/T17263-1998 and so on
Electronic ballast-tester
This document provides contact and location information for various offices of Lisun Electronics Inc., a leader in lighting and electrical test instruments. It then summarizes the specifications of Lisun's WT5000 Electronic Ballast Tester, which can display parameters and curves on a large LCD screen to test ballasts according to industry standards. The tester samples at up to 10MHz for dynamic analysis and communicates with PCs. Sample test reports are included showing the input, output, start and preheat characteristics of an electronic ballast tested with the WT5000.
Positive Displacement type Flow Sensor without Filter
We have varieties of Liquid Flow Sensors. Turbine type Flow Sensors and PD type Flow Sensors are in our scope of supply
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Moisture, Hydrogen, and Temperature Measurement in Electrical TransformersAlliance Technical Sales, Inc.
Receive information on transformer fault situations with reliable and robust online transmitter. The Vaisala Moisture, Hydrogen and Temperature Transmitter MHT410 for Transformer Oil measures directly from representative transformer oil giving both reliable hydrogen trend as well as fast moisture data.
It is built to last and doesn’t have wearing parts such as membrane, pumps, hoses or batteries. Easy to install, the MHT410 is ready to use within minutes. Continuously monitoring hydrogen and moisture levels with an in-situ probe is the first step in extending the life of a transformer through implementation of predictive maintenance practices leading to lower total cost of ownership.Q45C2-2-Electrode-Conductivity-Monitor-Product-Literature.pdf
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
Hioki Electrical Measuring Instruments in Bangladesh
This document provides an overview of various electrical measuring instruments from Hioki, organized by product category. It includes power analyzers and power meters for measuring power parameters of inverters, motors, and power grids. It also lists current sensors, power quality analyzers, recorderscopes, memory recorders, wireless data loggers, impedance analyzers, and LCR meters. The models highlighted include high accuracy and high speed devices for applications like testing of batteries, capacitors, motors, and inverters.
Hioki Electrical Measuring Instruments in Bangladesh
Hioki Electrical Measuring Instruments Japan. Product such as Avo Meter, Multimeter, Clamp Meter, Clamp on Power Hi-tester, Infrared Thermometer, Earth Resistance Tester, Insulation Tester etc...
For more information
Ronex International
“Your Trusted Laboratory Partner.”
47/2, Fazli Rabbi Road, Motijheel, Dhaka-1000. Bangladesh | Cell: +880 1811155717; 01612526665 | E-mail: ronexbd@gmail.com; ronexbd@live.com | Webs: ronexbd.webs.com | Skype: ronexbd | https://www.facebook.com/RonexInternational
Aml catalogue 13
The document provides product information for various vacuum measurement and control products from Arun Microelectronics Limited, including:
1) The TSP2 titanium sublimation pump power supply that controls titanium sublimation pumps with up to 4 filaments.
2) The NGC2D dual ion gauge controller that offers integrated pressure measurement and process control for two ion gauges and other gauges.
3) The AIG1xG series of Bayard-Alpert ionization gauges with various filament options.
4) The PVU3 and PVB3 Pirani gaugeheads that can be used with AML ion gauge controllers to measure pressure from 200 mbar to 1x10-
FMI21
The document provides technical specifications for the Liquicap T FMI21, a two-rod capacitive probe for continuous level measurement in liquids. It can measure levels in tanks of various materials from 6 to 98 inches in length and operates independently of tank geometry. The probe measures the capacitance between its two rods to determine the liquid level and transmits a 4-20 mA signal corresponding to the percentage of probe submerged.
K49 Controller
This document provides installation and configuration instructions for the TECNOLOGIC K49 series controller. It outlines:
1) Mounting requirements for the controller, including ambient temperature, humidity, and vibration limits. The controller is intended for indoor use.
2) Wiring diagrams and notes for different input types (thermocouple, RTD, voltage, current) and outputs (relays, SSRs). Proper wiring techniques are emphasized to avoid errors.
3) Technical specifications for the controller, including display type, accuracy, EMC standards, operating temperature, and power supply options. Instructions are provided for ordering controllers with different configurations.
Multi-Channel Data Logger
Unleash precision with the Multi-Channel Data Logger , a beacon of innovation. Featuring a universal input system supporting TCs, RTDs, mA, VDC, mV, and
frequency inputs. It effortlessly handles the diverse needs of industries with its 48-channel capacity. Elevate your measurements with enhanced flow
totalization, backed by temperature and pressure compensation. In terms of industrial data logging, the gadget establishes a new standard for ease and accuracy
Similar to DO Transmitter : DO-TX-22 (20)
Positive Displacement type Flow Sensor with Filter
Positive Displacement type Flow Sensor with Filter
Integrating sphere-and-ccd-spectroradiometer-system
Integrating sphere-and-ccd-spectroradiometer-system
Integrating sphere-and-ccd-spectroradiometer-system
Integrating sphere-and-ccd-spectroradiometer-system
Positive Displacement type Flow Sensor without Filter
Positive Displacement type Flow Sensor without Filter
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Moisture, Hydrogen, and Temperature Measurement in Electrical Transformers
Q45C2-2-Electrode-Conductivity-Monitor-Product-Literature.pdf
Q45C2-2-Electrode-Conductivity-Monitor-Product-Literature.pdf
Hioki Electrical Measuring Instruments in Bangladesh
Hioki Electrical Measuring Instruments in Bangladesh
Hioki Electrical Measuring Instruments in Bangladesh
Hioki Electrical Measuring Instruments in Bangladesh
More from Rajendra Nagaonkar
Conductivity Transmitter : CT-TX-22
Electronet series CT / TDS Transmitter CT-TX-22 are designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design and corrosion resistant material keep electrode spacing and surface area constant so cell constant remain stable for long period. Durability of material and high resistance to corrosion ensures the long life and require low maintenance.
More Info : http://www.eeplindia.com/conductivity-transmitter-CT-TX-22.html
Conductivity Sensor : CS-001
Electronet series CS-001 are Conductivity Sensors designed for fast, easy and trouble free start up.
These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design and corrosion resistant material keep electrode spacing and surface area constant so cell constant remain stable for long period. Durability of material and high resistance to corrosion ensures the long life and require low maintenance.
More Info : http://www.eeplindia.com/conductivity-sensor-CS001.html
Conductivity Transmitter : CT-100S
Electronet series CT-100S are Conductivity transmitters used for various industrial applications.
It can accept input from conductivity electrode of cell constant 0.01 / 0.1 / 1 & conductivity signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line conductivity indication is provided through LCD. Span/Zero adjustments are easily accessible.
More Info : http://www.eeplindia.com/conductivity-transmitter-CT100S.html
Capacitance Level Transmitter : LCT-01
Electronet series LCT-01 are Capacitance Type Level Transmitters. Vessel wall and probe forms two electrodes. If vessel is of non conductive material, the probe will be double rod type.
The distance between electrode and surface area of electrodes remain unchanged. The variable is the depth of the material being measured which represents the dielectric constant between two electrodes. Air and vacuum have relative dielectric constant as 1 and that of liquids, it is greater than 1.
The capacitance of the capacitor therefore depends on how much material lies between the probe and vessel wall i.e. whether the probe is covered with or free from material. The capacitor changes with change in level of the material and provides corresponding 4-20 mA DC continuous output.
More Info : http://www.eeplindia.com/level-transmitter-LCT01.html
Capacitance Level Switch : LCS-02
Electronet series LCS-02 are Capacitance Type Level Switches. The vessel wall & probe forms two electrodes.
If the vessel is of non-conductive material, the probe will be double rod type. The distance between the electrodes and surface area of the electrodes remains unchanged. The variable is the depth of the material being measured which represents the dielectric constant between two electrodes. Air and vacuum have relative dielectric constant as 1 and that of liquids is greater than 1.
The capacitance of the capacitor therefore depends on how much material lies between the probe and vessel wall i.e. whether the probe is covered with or free from material. The capacitance changes with change in level of the material & provides switching output at the desired preset level.
More Info : http://www.eeplindia.com/level-transmitter-switch-LCS02.html
Smart Water Metering By Electronet Equipments Pvt Ltd
Electronet is a supplier of everything from water meters, metering systems to service and support. It is our job to make it easy for you to run a sustainable water utility. Electronet delivers solutions in Residential and Industrial water metering. Our water metering solutions are based on proven technology and represent the next generation of smart metering. With a READY automated water meter reading system, you can say goodbye to manual readings, reporting via the internet and estimated calculations. Now, you can personally read consumption data automatically, without disturbing consumers.
Electronet's Smart Water Metering System aims to give consumers the information that they need to make intelligent decisions, the ability to execute those decisions and a variety of choices leading to substantial benefits they would not have enjoyed otherwise. With its robust Metering Infrastructure, It makes easy for the franchisees to manage the utilities and help them in greatly improving the consumer service and also refining the utility operations and asset management processes.
The whole distribution network can be continuously monitored real time by any specified interval reads. Reduction in overall water consumption requires a smart metering system, which enables companies to remotely cut off the water supply, in case a consumer exceeds the overdue limit. Utilities company, derive benefits from accurate billing, easy remote monitoring, and detection and prevention of theft.
More Info: http://www.eeplindia.com/water-metering.html
Pressure Switch : PT-22S
Electronet series PT-22S are Electronic Gauge Pressure Switches for fast, easy & trouble free operation.
These switches are designed to cover a majority of industrial applications such as gas, liquid etc. Analog output is 4-20mA & Pressure switch output is 2Amp.
Optocoupler phototriac & a power triac combination is used for switching, Optocoupler phototriac switch acts as an isolated driver and thus enables the driving of power triac by micro-controller.
More Info : http://www.eeplindia.com/pressure-switch-PT22S.html
Digital Pressure Gauge : DPG-20
Electronet series Digital Pressure Gauge - DPG 20 are differential pressure gauges for fast, easy & trouble free operation. These can be cost effective and ideal for monitoring the pressure. Display shut-off facility is provided so that display can be made 'ON' only if required through push button. Thus it saves the battery power & results in long lasting battery operation.
More Info : http://www.eeplindia.com/digital-pressure-gauge-DPG20.html
Electronic Water Meter : ELMAG-600W
Electronet series ELMAG-600W are Battery Powered Flow Meter is ideal when connecting to a power is difficult or expensive. When no mains power is available, a battery powered ELMAG-600W gives the flexibility to install a reliable water flow meter virtually anywhere without distorting accuracy & performance.
More Info : http://www.eeplindia.com/electronic-water-meter-ELMAG600W.html
Elmag200
Electronet series ELMAG-200 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes.
Due to its simple and rigid design, the flow meter is an obstruction-less and maintenance-free instrument in place of conventional mechanical flow measuring devices. The use of 'Pulsed DC' technology offers highest ability and better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow.
A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range.
More from Rajendra Nagaonkar (10)
Smart Water Metering By Electronet Equipments Pvt Ltd
Smart Water Metering By Electronet Equipments Pvt Ltd
Recently uploaded
Complete Self-write Restaurant Business Plan Guide for Entrepreneurs
A guide for making the Best Restaurant Advertising Campaigns with demographics, data analytics, and digital advertising for measurable results.
1：1制作英国伦敦大学毕业证（london毕业证书）学历学位证书原版一模一样
原版一模一样【微信：741003700 】【英国伦敦大学毕业证（london毕业证书）学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
1比1定做(aub毕业证书）伯恩茅斯艺术大学毕业证硕士学历证书原版一模一样
原版一模一样【微信：741003700 】【(aub毕业证书）伯恩茅斯艺术大学毕业证硕士学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Exploring the Contrast Silicone Sponge Rubber Versus Foam Rubber.pptx
Explore the key differences between silicone sponge rubber and foam rubber in this comprehensive presentation. Learn about their unique properties, manufacturing processes, and applications across various industries. Discover how each material performs in terms of temperature resistance, chemical resistance, and cost-effectiveness. Gain insights from real-world case studies and make informed decisions for your projects.
VYAPAR TRENDS JUNE-2024 e-EDITION (VOL-2, ISSUE-05)
VYAPAR TRENDS JUNE-2024 e-EDITION (VOL-2, ISSUE-05)
https://ftiiassociation.org/wp-content/uploads/2024/06/VT_JUN_2024.pdf
一比一原版(UAL毕业证)伦敦艺术大学毕业证如何办理
UAL毕业证学历书【微信95270640】《伦敦艺术大学毕业证购买》《如何办理UAL毕业证伦敦艺术大学文凭学历》Q微信95270640实体公司，专业可靠，办理毕业证办美国成绩单,做加拿大文凭学历认证,办新西兰学位证，学位证书是什么?《制作伦敦艺术大学毕业证多少钱》《UAL学历证书丢了怎么办理》办澳洲文凭认证，办留信网认证（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理伦敦艺术大学伦敦艺术大学毕业证offer流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！活总让山娃目不暇接惊叹不已父亲老问山娃想买什么想吃什么山娃知道父亲赚钱很辛苦除了书籍和文具山娃啥也不要能牵着父亲的手满城闲逛他已心满意足了父亲连挑了三套童装叫山娃试穿山娃有点不想父亲说城里不比乡下要穿得漂漂亮亮爸怎么不穿得漂亮望着父亲山娃反问道父亲听了并不回答只是吃吃地笑山娃很精神越逛越起劲父亲却越逛越疲倦望着父亲呵欠连天的样子山娃也说困了累了回家吧小屋闷罐一般头顶上的三叶扇彻夜呜呜作响搅得满屋拥
Recently uploaded (6)
Complete Self-write Restaurant Business Plan Guide for Entrepreneurs
Complete Self-write Restaurant Business Plan Guide for Entrepreneurs
Exploring the Contrast Silicone Sponge Rubber Versus Foam Rubber.pptx
Exploring the Contrast Silicone Sponge Rubber Versus Foam Rubber.pptx
VYAPAR TRENDS JUNE-2024 e-EDITION (VOL-2, ISSUE-05)
VYAPAR TRENDS JUNE-2024 e-EDITION (VOL-2, ISSUE-05)
DO Transmitter : DO-TX-22
- 1. Measuring Range Response Time Output 0 to 20.9 PPM 4 to 20 mA Max 600 ?Output Load Safe Operating Voltage Cable Length Power Supply 24V DC, External 36VDC 1 Mtr. Low Noise <10 mSec for 10 to 90% output change Temperature Range Connector 0 to 50°C BNC 1 Bar This is a straight line Sodium Chloride Can be fitted on receipt of required value Max Operating Pressure Linearity Teflon, PPSMaterial of Construction Fill Solution ATC Technical Specifications 2 Years 2 Years under normal usage Shelf Life Life Time 66Code ValueParameter 66M ¾” NPT Threaded 66N 66O 1" ASA 150 Flanged 1" Tri Clover Process Connection 66 66X Other NETWORKING MEASUREMENT SOLUTIONS 1EEPL-S056A-010118 IntelliComponents, Inc. 710 Dacula Rd., Ste 4A-200, Atlanta, GA 30019 ELECTRONET EQUIPMENTS PVT. LTD. Plot No. 8, (SEZ) Phase 1, Kesurdi MIDC, Khandala, Dist.- Satara Pin: 412 801, Maharashtra, India. Factory Address: Plot No. 84, 85, 86, Tiny Industrial Estate, Kondhwa Budruk, Pune-411 048, Maharashtra, India. Registered Office: USA Office: (678)-720-3030 info@intellicomponentsinc.com+91-20-26931476/2039 ho@eeplindia.com +91-20-26934122 www.eeplindia.com