Datasheet Fluke Pressure Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The document provides technical specifications for the Cerabar T PMP135 hygienic pressure transmitter. It is designed to measure absolute and gauge pressures in hygienic applications in the food and pharmaceutical industries. Key specifications include an output of 4-20 mA, accuracy of less than 0.5%, a temperature range of -25 to 100°C, and pressure measurement ranges from 1 bar to 40 bar. It has wetted parts made of 316L stainless steel with a surface roughness of Ra ≤ 0.8 μm. Accessories like displays and process fittings are also described along with pricing information.
Eta constant temperature and humidity test chamberMark Tung
ETA Constant Temperature and Humidity Test Chamber is used to test the performance of materials in various environments. It provides a
simulated environment for testing the heat resistance, cold resistance, dry resistance and humidity resistance of materials. Suitable for
electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metals, food, chemistry, building materials,
medical, aerospace products, scientific research and other industries
The document provides product information for the Cerabar T PMP131 pressure transmitter including:
- It measures absolute and gauge pressures from 0-25 bar using a 4-20mA output signal.
- Key features include long term stability, accuracy of <0.5%, and IP65/IP68 protection.
- It has common process connections including ANSI 1/2" and 1/4" and can operate from -25°C to +70°C.
- Accessories include displays for mounting in the field and it is available from $242 for small quantities.
Spec sheet Cemtek Model 1000 Oxygen MonitorBrian Gilmore
Key Features:
• Modular probe design with blowdown ideal for high dust,
corrosive applications
• FM Approved
• Ease of maintenance with no probe removal to replace
element
• Combustion efficiency mode available as option
• Remote control of calibration and blowdown routines via
digital inputs
• Detector sensor replacement and maintenance is half
the cost of equivalent competitive products
https://www.linkedin.com/pub/brian-gilmore/4/705/238
Vertical sterilizer GMP Model Tanco AutoclavePradeep Mishra
Vertical Sterilizer in complete Stainless Steel . It's outer and Inner chamber is made of Stainless Steel. Contact us for more information.
Visit - http://www.tancoautoclave.com/vertical-autoclave/gmp-model-vertical-autoclaves-sterilizer/
The document specifies requirements for liquid in glass thermometers used to accurately measure air temperature. It requires thermometers to comply with IS 5681-1983 standards and include muslin wicks sufficient for one year of use. The specifications include a maximum mercury thermometer that ranges from -35 to 55°C with 0.2°C accuracy, a minimum alcohol thermometer from -40 to 50°C with 0.3°C accuracy, and ordinary mercury thermometers from -35 to 55°C with 0.2°C accuracy for dry and wet bulb measurements.
The testo 320 is a high-quality flue gas analyzer for efficient heating system diagnosis and monitoring. It features a high-resolution color display, storage for 500 measurements, and sensors for measuring O2, CO, flue gas, pressure, temperature and more. The testo 320 simplifies operation with standardized measurement menus and is suitable for routine work, emergencies and checking legal limits.
Datasheet Fluke 7526A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Precision Process Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The document provides technical specifications for the Cerabar T PMP135 hygienic pressure transmitter. It is designed to measure absolute and gauge pressures in hygienic applications in the food and pharmaceutical industries. Key specifications include an output of 4-20 mA, accuracy of less than 0.5%, a temperature range of -25 to 100°C, and pressure measurement ranges from 1 bar to 40 bar. It has wetted parts made of 316L stainless steel with a surface roughness of Ra ≤ 0.8 μm. Accessories like displays and process fittings are also described along with pricing information.
Eta constant temperature and humidity test chamberMark Tung
ETA Constant Temperature and Humidity Test Chamber is used to test the performance of materials in various environments. It provides a
simulated environment for testing the heat resistance, cold resistance, dry resistance and humidity resistance of materials. Suitable for
electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metals, food, chemistry, building materials,
medical, aerospace products, scientific research and other industries
The document provides product information for the Cerabar T PMP131 pressure transmitter including:
- It measures absolute and gauge pressures from 0-25 bar using a 4-20mA output signal.
- Key features include long term stability, accuracy of <0.5%, and IP65/IP68 protection.
- It has common process connections including ANSI 1/2" and 1/4" and can operate from -25°C to +70°C.
- Accessories include displays for mounting in the field and it is available from $242 for small quantities.
Spec sheet Cemtek Model 1000 Oxygen MonitorBrian Gilmore
Key Features:
• Modular probe design with blowdown ideal for high dust,
corrosive applications
• FM Approved
• Ease of maintenance with no probe removal to replace
element
• Combustion efficiency mode available as option
• Remote control of calibration and blowdown routines via
digital inputs
• Detector sensor replacement and maintenance is half
the cost of equivalent competitive products
https://www.linkedin.com/pub/brian-gilmore/4/705/238
Vertical sterilizer GMP Model Tanco AutoclavePradeep Mishra
Vertical Sterilizer in complete Stainless Steel . It's outer and Inner chamber is made of Stainless Steel. Contact us for more information.
Visit - http://www.tancoautoclave.com/vertical-autoclave/gmp-model-vertical-autoclaves-sterilizer/
The document specifies requirements for liquid in glass thermometers used to accurately measure air temperature. It requires thermometers to comply with IS 5681-1983 standards and include muslin wicks sufficient for one year of use. The specifications include a maximum mercury thermometer that ranges from -35 to 55°C with 0.2°C accuracy, a minimum alcohol thermometer from -40 to 50°C with 0.3°C accuracy, and ordinary mercury thermometers from -35 to 55°C with 0.2°C accuracy for dry and wet bulb measurements.
The testo 320 is a high-quality flue gas analyzer for efficient heating system diagnosis and monitoring. It features a high-resolution color display, storage for 500 measurements, and sensors for measuring O2, CO, flue gas, pressure, temperature and more. The testo 320 simplifies operation with standardized measurement menus and is suitable for routine work, emergencies and checking legal limits.
Datasheet Fluke 7526A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Precision Process Calibrator. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
FlowJam -
Material flow monitoring
Microwave detector for contactless monitoring
of material flows for "flow" or "no flow"
Absolutely insensitive against material deposits
For any line diameter
With adapter, usable up to 220 °C and 20 bar
With ceramic mounting, usable up to 1,000 °C
Compact (no separate electronics)
Signalling through relay switching
Different sensitivity levels
Detection through all non-conductive walls
Can also be supplied with short housing and separate electronics
Detection of material clogging and material standstill
The FlowJam detects solid flows of all types for material movement.
A differentiation is made between the following switching states:
- Material flow
- Material clogging / standstill or empty pipe
The system operates with no contact, using microwaves in a process in which the material movement is detected by using the Doppler effect.
The FlowJam is an especially process-secure device, since the microwave can penetrate material coating on the sensor and reliably detect the material movement behind it. If container walls, housings or pipelines are not metal, it is possible to measure from the outside.
The FlowJam can also be used under difficult conditions such as high operating temperatures and pressures with the help of a process adapter.
The FlowJam can be easily installed in the following ways:
Figure 1: Screwing into a G 1½"-inch-threaded connection
Figure 2: Using a DN 40 flange
Figure 3: Using a pipe clamp or other holding brackets
The document describes two models of a pneumatic edge sensor used to measure the position of edges in paper machines. Model 1 has a small dead zone of ±0.5 mm while Model 2 has a larger dead zone of ±2.5 mm, making it more suitable for use in dry sections. Both models have an operating range of ±18 degrees which corresponds to approximately ±65 mm at their recommended contact points. The edge sensors are pneumatic and mechanical in design, using compressed air and stainless steel components to operate within a temperature range of 10-150 degrees Celsius.
The document provides information on pressure measuring instruments from Testo for use in testing gas and water installations. It describes the Testo 312-2, 312-3, and 312-4 instruments, which can measure pressure, temperature, and detect gas leaks. The 312-2 is for fine pressure measurement up to 40/200 hPa. The 312-3 supports load and gas tightness testing on gas pipes up to 6000 hPa. The 312-4 allows differential pressure measurement and recording of pressure and temperature over time for analysis. Accessories are listed for conducting various installation tests within specifications.
How to measure solids flow? Mass flow of Bulk Solids?Tiago Morais
This document provides information on various flow measurement devices from SWR engineering Messtechnik GmbH. It describes their SolidFlow, MaxxFlow, DensFlow, PicoFlow, SpeedFlow, FlowJam, FlowJam Plus, FlowJam A, SlideControl and Paddy devices. For each device it provides details on measuring capabilities, installation, applications and industries where they can be used such as incineration, food/pharma, cement, steel, carbon black and grain. It emphasizes that the devices can measure solids flow in various transport applications including pneumatic, free fall, and dilute and dense phase.
The document specifies requirements for an electronic precision balance to be used in a laboratory environment. It must have a 200g capacity, 0.1mg resolution, and 5s stabilization time. Additional required features include auto zero, tare function, removable stainless steel tray, overload protection, dust proof cover, and calibration weights. The balance will be used to precisely weigh sediment filters and samples.
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: ◦30 "Hg Vac to 5000 psi
• 1 bar Vac to 344 bar
• 0.2 "wcd to 500 psid
• 0,5 mbar d to 34,5 bar d
• -180 to 650 ºF
• -117 to 340ºC
Approvals: UL, CSA, CE, TUV
VEGA produces a range of pressure transmitters for measuring process pressures and hydrostatic levels. Their transmitters feature ceramic, metallic, or chemical seal measuring cells to withstand high temperatures and harsh chemicals. Models like the VEGABAR 52 and VEGADIF 65 can reliably measure differential pressures and monitor multiple variables like level and density. VEGA offers customized solutions along with support services to save customers time and money throughout a transmitter's lifespan.
MHC-3000 Wall mount ultrasonic flow meter data sheetKevin Yang
The document describes a wall mount ultrasonic flow meter. It can measure water and other liquid flows across a wide range of pipe sizes and temperatures. It has options for hazardous area certification, integrated temperature sensors, and a heat measurement function to calculate energy or heat flow. It connects to automation systems and has configurable inputs, outputs, and communication protocols.
The Model 200 Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1 ratio. It is ideally suited for systems that require input isolation or increased forward flow capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the M200 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high Flow capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in forward flow mode.
This document provides specifications for the TESCOM 44-5800 Series pressure reducing regulators. The regulators offer superior heat transfer technology and tolerance to voltage spikes and high temperatures, making them suitable for worldwide applications. Key specifications include maximum inlet/outlet pressures of 6000/500 psig, operating temperatures up to 500°F, voltage requirements of 90-125 or 190-230 VAC, and material options of 316 stainless steel, Monel, or Hastelloy. The document also includes diagrams of the regulator and flow charts illustrating its performance characteristics.
High performance differential pressure transmitters feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam flow as well as liquid level, density and
pressure. Standard output is a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
BARTON 7000 Series liquid turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than 40 years of turbine manufacturing experience, this built-to-order series features a range of sizes, materials, bearing systems, and options.
SVS Calibration was established in 2015 as an independent calibration company specializing in services for the pharmaceutical industry. They provide calibration for a wide range of instruments including pressure gauges, temperature sensors, flow meters, and ovens. Their calibrations follow regulatory standards from organizations like the FDA and EU GMP. They serve several major pharmaceutical companies in India.
The document describes instrumentation products from Ashford Instrumentation Ltd for various industries including HVAC, plant room, utility, diving, marine, and subsea. It provides an overview of their pressure gauges, test points, thermometers, measurement kits, recorders, valves, transmitters, and tank level monitoring products. It notes that Ashford Instrumentation was established in 2003 and specializes in pressure, temperature, level, and flow measurement for various industries, with an experienced technical team.
One of the most widely used methods of monitoring and controlling liquid level in a tank is the use of Bubble Tubes with Pressure or Differential Pressure Transmitters. A small but uninterrupted flow of air or inert gas is forced down through a dip tube which extends to near the bottom of the tank. The back pressure of the introduced gas is a function of the liquid level or head in the tank.
Industrial temperature calibrators workload matrix. See which industrial temperature calibrator matches your workload requirements. Brought to you by Fluke Calibration.
Needle flame tester is the needle-shaped burner by a certain size, fill the inside with a specific gas (butane), and at 45 ° angle by fixed time and certain direction to test products, Assess the fire hazard of small flames caused by fault conditions inside the equipment, depending on the test sample Whether ignited, and its ignition time and combustion Length.more view on http://www.qinsun-lab.com/Products/Property/Flammability/165.html
See-Flo® Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.
This document describes a large capacity vacuum oven model SVAC9-2. It can be programmed to perform multiple ramp and soak temperature profiles with a Watlow controller. It includes a digital vacuum gauge and safety features. The oven chamber is cross-flow ventilated for enhanced performance and placed on a mobile stand, though a vacuum pump must be purchased separately. It lists several vacuum oven applications and features precise temperature control within a range of ambient +5°C to 220°C.
India attracts hundreds of tourists annually to experience its people, traditions, and customs. A trip to India can be tailored around areas of interest such as history, nature, philosophy, architecture, food, or music. The University of Agronomic Sciences and Veterinary Medicine Bucharest student Elena Barbu from group 8119 finds Indian culture fascinating.
FlowJam -
Material flow monitoring
Microwave detector for contactless monitoring
of material flows for "flow" or "no flow"
Absolutely insensitive against material deposits
For any line diameter
With adapter, usable up to 220 °C and 20 bar
With ceramic mounting, usable up to 1,000 °C
Compact (no separate electronics)
Signalling through relay switching
Different sensitivity levels
Detection through all non-conductive walls
Can also be supplied with short housing and separate electronics
Detection of material clogging and material standstill
The FlowJam detects solid flows of all types for material movement.
A differentiation is made between the following switching states:
- Material flow
- Material clogging / standstill or empty pipe
The system operates with no contact, using microwaves in a process in which the material movement is detected by using the Doppler effect.
The FlowJam is an especially process-secure device, since the microwave can penetrate material coating on the sensor and reliably detect the material movement behind it. If container walls, housings or pipelines are not metal, it is possible to measure from the outside.
The FlowJam can also be used under difficult conditions such as high operating temperatures and pressures with the help of a process adapter.
The FlowJam can be easily installed in the following ways:
Figure 1: Screwing into a G 1½"-inch-threaded connection
Figure 2: Using a DN 40 flange
Figure 3: Using a pipe clamp or other holding brackets
The document describes two models of a pneumatic edge sensor used to measure the position of edges in paper machines. Model 1 has a small dead zone of ±0.5 mm while Model 2 has a larger dead zone of ±2.5 mm, making it more suitable for use in dry sections. Both models have an operating range of ±18 degrees which corresponds to approximately ±65 mm at their recommended contact points. The edge sensors are pneumatic and mechanical in design, using compressed air and stainless steel components to operate within a temperature range of 10-150 degrees Celsius.
The document provides information on pressure measuring instruments from Testo for use in testing gas and water installations. It describes the Testo 312-2, 312-3, and 312-4 instruments, which can measure pressure, temperature, and detect gas leaks. The 312-2 is for fine pressure measurement up to 40/200 hPa. The 312-3 supports load and gas tightness testing on gas pipes up to 6000 hPa. The 312-4 allows differential pressure measurement and recording of pressure and temperature over time for analysis. Accessories are listed for conducting various installation tests within specifications.
How to measure solids flow? Mass flow of Bulk Solids?Tiago Morais
This document provides information on various flow measurement devices from SWR engineering Messtechnik GmbH. It describes their SolidFlow, MaxxFlow, DensFlow, PicoFlow, SpeedFlow, FlowJam, FlowJam Plus, FlowJam A, SlideControl and Paddy devices. For each device it provides details on measuring capabilities, installation, applications and industries where they can be used such as incineration, food/pharma, cement, steel, carbon black and grain. It emphasizes that the devices can measure solids flow in various transport applications including pneumatic, free fall, and dilute and dense phase.
The document specifies requirements for an electronic precision balance to be used in a laboratory environment. It must have a 200g capacity, 0.1mg resolution, and 5s stabilization time. Additional required features include auto zero, tare function, removable stainless steel tray, overload protection, dust proof cover, and calibration weights. The balance will be used to precisely weigh sediment filters and samples.
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: ◦30 "Hg Vac to 5000 psi
• 1 bar Vac to 344 bar
• 0.2 "wcd to 500 psid
• 0,5 mbar d to 34,5 bar d
• -180 to 650 ºF
• -117 to 340ºC
Approvals: UL, CSA, CE, TUV
VEGA produces a range of pressure transmitters for measuring process pressures and hydrostatic levels. Their transmitters feature ceramic, metallic, or chemical seal measuring cells to withstand high temperatures and harsh chemicals. Models like the VEGABAR 52 and VEGADIF 65 can reliably measure differential pressures and monitor multiple variables like level and density. VEGA offers customized solutions along with support services to save customers time and money throughout a transmitter's lifespan.
MHC-3000 Wall mount ultrasonic flow meter data sheetKevin Yang
The document describes a wall mount ultrasonic flow meter. It can measure water and other liquid flows across a wide range of pipe sizes and temperatures. It has options for hazardous area certification, integrated temperature sensors, and a heat measurement function to calculate energy or heat flow. It connects to automation systems and has configurable inputs, outputs, and communication protocols.
The Model 200 Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1 ratio. It is ideally suited for systems that require input isolation or increased forward flow capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the M200 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high Flow capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in forward flow mode.
This document provides specifications for the TESCOM 44-5800 Series pressure reducing regulators. The regulators offer superior heat transfer technology and tolerance to voltage spikes and high temperatures, making them suitable for worldwide applications. Key specifications include maximum inlet/outlet pressures of 6000/500 psig, operating temperatures up to 500°F, voltage requirements of 90-125 or 190-230 VAC, and material options of 316 stainless steel, Monel, or Hastelloy. The document also includes diagrams of the regulator and flow charts illustrating its performance characteristics.
High performance differential pressure transmitters feature a single crystal silicon resonant sensor and are suitable to measure liquid, gas, or steam flow as well as liquid level, density and
pressure. Standard output is a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
BARTON 7000 Series liquid turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than 40 years of turbine manufacturing experience, this built-to-order series features a range of sizes, materials, bearing systems, and options.
SVS Calibration was established in 2015 as an independent calibration company specializing in services for the pharmaceutical industry. They provide calibration for a wide range of instruments including pressure gauges, temperature sensors, flow meters, and ovens. Their calibrations follow regulatory standards from organizations like the FDA and EU GMP. They serve several major pharmaceutical companies in India.
The document describes instrumentation products from Ashford Instrumentation Ltd for various industries including HVAC, plant room, utility, diving, marine, and subsea. It provides an overview of their pressure gauges, test points, thermometers, measurement kits, recorders, valves, transmitters, and tank level monitoring products. It notes that Ashford Instrumentation was established in 2003 and specializes in pressure, temperature, level, and flow measurement for various industries, with an experienced technical team.
One of the most widely used methods of monitoring and controlling liquid level in a tank is the use of Bubble Tubes with Pressure or Differential Pressure Transmitters. A small but uninterrupted flow of air or inert gas is forced down through a dip tube which extends to near the bottom of the tank. The back pressure of the introduced gas is a function of the liquid level or head in the tank.
Industrial temperature calibrators workload matrix. See which industrial temperature calibrator matches your workload requirements. Brought to you by Fluke Calibration.
Needle flame tester is the needle-shaped burner by a certain size, fill the inside with a specific gas (butane), and at 45 ° angle by fixed time and certain direction to test products, Assess the fire hazard of small flames caused by fault conditions inside the equipment, depending on the test sample Whether ignited, and its ignition time and combustion Length.more view on http://www.qinsun-lab.com/Products/Property/Flammability/165.html
See-Flo® Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.
This document describes a large capacity vacuum oven model SVAC9-2. It can be programmed to perform multiple ramp and soak temperature profiles with a Watlow controller. It includes a digital vacuum gauge and safety features. The oven chamber is cross-flow ventilated for enhanced performance and placed on a mobile stand, though a vacuum pump must be purchased separately. It lists several vacuum oven applications and features precise temperature control within a range of ambient +5°C to 220°C.
India attracts hundreds of tourists annually to experience its people, traditions, and customs. A trip to India can be tailored around areas of interest such as history, nature, philosophy, architecture, food, or music. The University of Agronomic Sciences and Veterinary Medicine Bucharest student Elena Barbu from group 8119 finds Indian culture fascinating.
Team Evraz Ride To Conquer Cancer Review For 2016Greg Zabikow
The document summarizes Evraz's participation in the Enbridge Ride to Conquer Cancer. The Evraz team had 21 riders and crew members who trained in the spring and rode over 200km along the Canadian Rockies over two days in June to raise money for cancer research. The team held a fundraising event that raised over $7,000 and the entire Evraz team raised $92,948 for cancer research. In total, the event raised $6.35 million which will be donated to the Alberta Cancer Foundation.
Nelson Mandela was born in 1918 in South Africa and was one of 13 children. He became the first in his family to attend school and received the English name "Nelson" from his teachers. As a lawyer and member of the African National Congress, Mandela fought against apartheid in South Africa and was imprisoned for life from 1964 to 1990 for trying to bring down the government, spending 18 years in prison on Robben Island, before being released by Prime Minister F.W. de Klerk.
Diversification strategies seek to increase profitability through greater sales volume from new products and markets. There are three main types: concentric adds related products, horizontal adds products for existing customers, and conglomerate adds unrelated products. Defensive strategies protect market share, profitability, and mind share. They include joint ventures, retrenchment through cost reduction, divestiture by selling divisions, and liquidation by selling all assets. Diversification and defensive strategies allow firms to expand operations and lessen risks of being attacked by competitors.
This document summarizes a product sheet for Honeywell's SCC Series silicon pressure sensors. The SCC Series offers low-cost sensor elements for measuring pressures from 0 to 5 psi up to 0 to 300 psi, with internal temperature compensation. The sensors can measure differential, gauge or absolute pressures and are packaged in button, DIP or nipple configurations. Key specifications include accuracy of 0.5% of full scale and long term stability of 0.1% of full scale over operating temperature ranges of -40°C to 85°C.
This document summarizes the results of a study comparing conventional injection molding technology to Roctool technology using a spiral mold. With Roctool technology, a significant improvement in flow length was achieved at both 1mm and 1.5mm thicknesses compared to conventional technology. At 1000 bar injection pressure and 220C mold temperature, Roctool technology achieved a 73% reduction in pressure drop between sensors compared to conventional technology at 90C. The results demonstrate that Roctool technology allows reducing part thickness from 1.5mm to 1mm while obtaining the longest flow length and an important reduction in pressure drop.
The document reports on tests using Roctool technology versus conventional technology to injection mold plastic samples. It finds that Roctool technology provides improved flow length and reduced pressure drop compared to conventional methods. Specifically, it allows thinner parts to be molded - 1mm parts using Roctool technology achieved similar flow lengths to 1.5mm parts made with conventional technology. The pressure drop measured between sensors in the cavity was reduced by up to 43% with Roctool technology. Overall, Roctool characterization trials demonstrated significant flow length and pressure drop improvements for the material tested.
The document reports on tests using Roctool technology versus conventional technology to injection mold plastic samples. It finds that Roctool technology provides improved flow length and reduced pressure drop compared to conventional methods. Specifically, it allows thinner parts to be molded - 1mm parts using Roctool technology achieved similar flow lengths to 1.5mm parts made with conventional technology. The pressure drop measured between sensors in the cavity was reduced by up to 43% with Roctool technology. Overall, Roctool characterization trials demonstrated significant flow length and pressure drop improvements for the material tested.
Technical-sys retail distributor of calibration test instruments that best providing services like testing instruments repairing services and measuring instruments repairing services, mechanical calibration services and electrical calibration services..
Testo - 6446-6447 - Compressed air counterTesto Limited
The document provides information on the testo 6446 and testo 6447 compressed air counters. It summarizes their key features and specifications. The counters measure norm volume flow of compressed air between 6.7 to 27500 m3/h. They have exchangeable fittings, material options, and output signal flexibility. The testo 6447 allows for removal of the probe under pressure via a patented screw fitting. Both provide built-in totalizers and an operating menu with LED display.
The BetaGauge 330 pressure calibrator is a small, lightweight, and portable device that can generate pressures from high vacuum to 300 PSI using an integrated electric pump. It has high accuracy of 0.035% and can measure pressure, temperature, and current. The BetaGauge 330 is ideal for field calibration and gas flow meter applications.
Measurement and Calibration Test Instrumentstechnicalsys
The BetaGauge 330 pressure calibrator is a small, lightweight, and portable device that can generate pressures from high vacuum to 300 PSI using an integrated electric pump. It has high accuracy of 0.035% and can measure pressure, temperature, and current. The BetaGauge 330 is ideal for field calibration and gas flow meter applications.
The document reports on tests of injection molding plastic using conventional and Roctool technologies. With Roctool technology, the tests achieved similar flow length at 1 mm thickness as conventional technology did at 1.5 mm thickness, representing a significant thickness reduction. Pressure drop between sensors was also reduced by up to 53% with Roctool technology compared to conventional technology. Overall, the results demonstrate that Roctool technology allows for longer flow length and lower pressure drop at a mold temperature of 180C versus 90C for conventional technology.
This document summarizes the specifications and features of the Kimo MP 200 series of thermo-anemometer manometers. The MP 200 instruments can measure parameters including pressure, air velocity, airflow, temperature, and current/voltage. They have interchangeable measurement modules, a large graphic display, wireless data logging capabilities, and can store up to 8,000 measurement points. The document provides detailed technical specifications for the measuring ranges and accuracy of each parameter measured by the MP 200 series.
This document discusses various probes that can be used with the testo 400 measuring device. It provides details on 12 different probe types, including hot wire probes, vane probes, temperature-humidity probes, and a lux probe. Each probe is described in 1-2 paragraphs covering its measurement capabilities, technical specifications, and price. The document is aimed at providing information on the various probe options available for different measurement applications like air velocity, volume flow, temperature, humidity, and light intensity.
This document summarizes the results of a study comparing conventional injection molding technology to Roctool technology using a spiral mold. Testing showed that with Roctool technology at a mold temperature of 200C, flow length was significantly improved compared to conventional technology at 90C, and the mold thickness could be reduced from 1.5mm to 1mm. Pressure drop between sensors was also reduced by up to 67% with Roctool technology. In conclusion, a mold temperature of 200C is recommended for this material to achieve the longest flow and greatest reduction in pressure drop compared to conventional technology.
The high performance differential pressure transmitter EJX110A features single crystal silicon resonant sensor and is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. EJX110A outputs a 4 to 20 mA DC signal corresponding to the measured differential pressure. Its highly accurate and stable sensor can also measure the static pressure which can be shown on the integral indicator or remotely monitored via BRAIN or HART communications.
The document reports on a study comparing the flow and pressure performance of conventional and Roctool molding technologies. Testing showed that with Roctool technology, a 1mm thick part could be molded where conventional required 1.5mm, and pressure drop was reduced by up to 76%. Flow length was significantly improved at both 90C and 220C mold temperatures when using Roctool technology. The results demonstrate that Roctool technology allows for thinner parts and reduced pressure drop compared to conventional molding.
This document summarizes test results from injection molding trials using Roctool technology compared to conventional technology. The trials showed that using a mold temperature of 290°C with Roctool technology significantly improved flow length and reduced pressure drop compared to a conventional temperature of 150°C. Specifically, flow length increased over 60% and pressure drop decreased over 50% with Roctool technology. Additionally, Roctool technology allowed reducing the part thickness from 1.5mm to 1mm while achieving equivalent flow length.
Similar to Datasheet Fluke 718 Ex. Hubungi PT. Siwali Swantika 021-45850618 (20)
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika ☎️ JKT 021-45850618 / SBY 031-8421264, atau kunjungi website kami di https://siwali.com/contact-us/
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika ☎️ JKT 021-45850618 / SBY 031-8421264, atau kunjungi website kami di https://siwali.com/contact-us/
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
atau kunjungi website kami di https://siwali.com/
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
atau kunjungi website kami di https://siwali.com/
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
atau kunjungi website kami di https://siwali.com/
Dokumen tersebut membahas tentang pentingnya mempromosikan toleransi dan kerukunan antar umat beragama di Indonesia. Untuk itu, diperlukan kerja sama antar pemimpin agama dan pemerintah dalam membangun masyarakat yang inklusif dan damai.
Dokumen tersebut membahas tentang pentingnya menjaga kesehatan mental dan emosional selama masa pandemi Covid-19. Beberapa hal yang dapat dilakukan untuk menjaga kesehatan mental dan emosional antara lain dengan tetap berkomunikasi dengan orang lain, menjaga rutinitas sehari-hari, serta menghindari berita yang membuat cemas berlebihan.
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
atau kunjungi website kami di https://siwali.com/
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Low power architecture of logic gates using adiabatic techniquesnooriasukmaningtyas
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
6th International Conference on Machine Learning & Applications (CMLA 2024)
Datasheet Fluke 718 Ex. Hubungi PT. Siwali Swantika 021-45850618
1. Intrinsically Safe
Fluke 718Ex 30G,
100G, and 300G
Pressure Calibrators
Pump Up the Pressure
Technical Data
The new Fluke 718Ex Intrinsically Safe Pressure Calibrator
is a powerful new intrinsically safe, self contained pressure
calibration solution that offers:
• ATEX II 1G Ex ia IIC
T4 compliance
• I.S. Class I, Division
1 compliance
• Built-in pressure/vacuum
hand pump, with vernier
and bleed valve
• Pressure measurement to
0.05 % of full span, using an
internal pressure sensor
• Pressure measurement to
3,000 psi/200 bar using
any of the 8 intrinsically
safe Fluke 700PEx Pressure
Modules
• Wide range of selectable
measurement units for
pressure
• Current measurement
with 0.02 % accuracy and
0.001 mA resolution
• Pressure switch test function
• Min/Max hold functions
• Compact size and weight
• Simple, push-button user
interface
• Rugged and reliable, for
field use
• Pressure switch test function
Ordering information
Model
Fluke-718Ex 30G Pressure Calibrator
Fluke-718Ex 100G Pressure Calibrator
Fluke-718Ex 300G Pressure Calibrator
Included accessories
Protective red holster, TL75 test leads, AC72 test clips, CD users
manuals (English, French, German, Spanish, Italian, Dutch,
Norwegian, Danish, Swedish, Finnish, Portuguese, Korean,
Chinese, Japanese), Fluke 718Ex CCD control drawing
I.S. Class I Div 1 Groups A-D T4
AEx ia IIC T4
II 1 G Ex ia IIC T4
KEMA 04 ATEX 1061
Ta = -10 °C to +55 °C
Pressure specifications (internal sensor)
18 °C to 28 °C, one year
Pressure Input
Range Resolution Accuracy
-12 psi to 30 psi
(-82.7 kPa to 207 kPa)
.001 psi (0.01 kPa) .05 % FS
-12 psi to 100 psi
(-82.7 kPa to 690 kPa)
.01 psi (0.01 kPa) .05 % FS
-12 psi to 300 psi
(-82.7 kPa to 2068 kPa)
.01 psi (0.01 kPa) .05 % FS
Temp Coeff. -10 °C to
18 °C, 28 °C to 55 °C
+ .01 % of range per °C
Engineering Units (in Hg)
PSI, in. H2O (4 °C), in. H2O (20 °C), kPa, cm H2O (4 °C),
cm H2O (20 °C), BAR, mBAR, kg/cm2, mmHg, in Hg
Media
Gasses (non corrosive)
Overpressure
3 x F.S. on 30G
2 x F.S. on 100G
375 PSI on 300G