The EAP300 is a wireless access point that provides WiFi coverage of up to 300Mbps across 3 floors. It has features such as MSSID, VLAN, 802.3af PoE, a ceiling mount design, 32MB memory, 4MB flash, and 2 internal 5dBi antennas. The EAP300 supports common wireless standards including 802.11b, 802.11g, and 802.11n, with security options like WEP, WPA/WPA2, and 802.1x authentication. It is suitable for both home and office use by providing extended wireless coverage and a simple setup process.
The EnGenius ECB350 is a wireless-n multi-function gigabit access point that delivers data transfer rates up to 300Mbps. It offers extended wireless coverage through external 5dBi antennas, secure network management through multiple SSIDs and VLANs, and flexible power options through 802.3af PoE support. The ECB350 provides 8 operation modes and is suitable for expanding existing networks or increasing bandwidth for additional users.
The document is a datasheet for the ECB600 wireless access point/client bridge from EnGenius Europe. It provides key details about the device such as its operating frequencies, data rates up to 600Mbps, support for 802.11a/b/g/n standards, inclusion of 4 external antennas, gigabit Ethernet port, ability to operate as an access point or repeater, security features, and environmental specifications. The ECB600 allows for simultaneous dual band wireless connectivity on both 2.4GHz and 5GHz frequencies with a range of up to 29dBm.
The ENH500 is an outdoor wireless CPE device that can support up to 50 clients and deliver wireless connections over long ranges of up to 25km. It has a high power 13dBi dual polarization antenna and supports various operation modes. The ENH500 is designed to operate reliably in outdoor environments and provide security features to ensure safe wireless connectivity. It can transfer data at up to 300Mbps and includes features such as VLAN support, QoS, and wireless security protocols.
The document provides information on the EnGenius ECB300 wireless access point/client bridge. It lists the key features and specifications of the ECB300 including that it operates in the 2.4GHz frequency band, has a data rate up to 300Mbps, includes two external 5dBi antennas, has various operation modes, supports WEP, WPA/WPA2, MAC address filtering, 802.1x authentication, and WMM QoS. It also provides details on the hardware, interfaces, power requirements, and packaging contents of the ECB300.
The document provides information on the EnGenius EWS350AP dual-band 802.11ac indoor access point. It can operate as a standalone access point or as part of a scalable wireless network management solution. Key features include speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz, high transmit power for expanded coverage, and support for up to 8 SSIDs and VLAN tagging per radio. It also supports centralized management and reporting via the optional ezMaster software.
The document is a datasheet for the EAP300v2 access point from EnGenius Europe. It summarizes the key features and specifications of the EAP300v2 including its support for 802.11b/g/n wireless standards at speeds up to 300Mbps, Power-over-Ethernet support, ability to operate in access point, WDS, or repeater modes, security features, antennas, interfaces, dimensions, and environmental specifications. It also provides details on the radio specifications, wireless features, physical characteristics, and management capabilities.
The EAP300 is a wireless access point that provides WiFi coverage of up to 300Mbps across 3 floors. It has features such as MSSID, VLAN, 802.3af PoE, a ceiling mount design, 32MB memory, 4MB flash, and 2 internal 5dBi antennas. The EAP300 supports common wireless standards including 802.11b, 802.11g, and 802.11n, with security options like WEP, WPA/WPA2, and 802.1x authentication. It is suitable for both home and office use by providing extended wireless coverage and a simple setup process.
The EnGenius ECB350 is a wireless-n multi-function gigabit access point that delivers data transfer rates up to 300Mbps. It offers extended wireless coverage through external 5dBi antennas, secure network management through multiple SSIDs and VLANs, and flexible power options through 802.3af PoE support. The ECB350 provides 8 operation modes and is suitable for expanding existing networks or increasing bandwidth for additional users.
The document is a datasheet for the ECB600 wireless access point/client bridge from EnGenius Europe. It provides key details about the device such as its operating frequencies, data rates up to 600Mbps, support for 802.11a/b/g/n standards, inclusion of 4 external antennas, gigabit Ethernet port, ability to operate as an access point or repeater, security features, and environmental specifications. The ECB600 allows for simultaneous dual band wireless connectivity on both 2.4GHz and 5GHz frequencies with a range of up to 29dBm.
The ENH500 is an outdoor wireless CPE device that can support up to 50 clients and deliver wireless connections over long ranges of up to 25km. It has a high power 13dBi dual polarization antenna and supports various operation modes. The ENH500 is designed to operate reliably in outdoor environments and provide security features to ensure safe wireless connectivity. It can transfer data at up to 300Mbps and includes features such as VLAN support, QoS, and wireless security protocols.
The document provides information on the EnGenius ECB300 wireless access point/client bridge. It lists the key features and specifications of the ECB300 including that it operates in the 2.4GHz frequency band, has a data rate up to 300Mbps, includes two external 5dBi antennas, has various operation modes, supports WEP, WPA/WPA2, MAC address filtering, 802.1x authentication, and WMM QoS. It also provides details on the hardware, interfaces, power requirements, and packaging contents of the ECB300.
The document provides information on the EnGenius EWS350AP dual-band 802.11ac indoor access point. It can operate as a standalone access point or as part of a scalable wireless network management solution. Key features include speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz, high transmit power for expanded coverage, and support for up to 8 SSIDs and VLAN tagging per radio. It also supports centralized management and reporting via the optional ezMaster software.
The document is a datasheet for the EAP300v2 access point from EnGenius Europe. It summarizes the key features and specifications of the EAP300v2 including its support for 802.11b/g/n wireless standards at speeds up to 300Mbps, Power-over-Ethernet support, ability to operate in access point, WDS, or repeater modes, security features, antennas, interfaces, dimensions, and environmental specifications. It also provides details on the radio specifications, wireless features, physical characteristics, and management capabilities.
The document is a datasheet for the EAP1200H wireless access point. It provides specifications for the device such as supporting wireless standards up to 802.11ac with speeds up to 867Mbps, dual-radio support, Power-over-Ethernet support, security features, and management features for configuration and monitoring. It includes details on wireless capabilities, antenna configuration, interface and port options, dimensions, mounting options, and environmental specifications.
The document provides information about the EnGenius ENS1200, a dual band wireless AC1200 outdoor access point. It has speeds up to 300Mbps on 2.4GHz and 866Mbps on 5GHz. Key features include dual concurrent radios, high transmit power, enhanced receive sensitivity, internal high gain antennas, various operation modes, and support for 802.11 standards. It is suitable for providing outdoor wireless access and connectivity for small to medium businesses.
The EUB9603H is a high power 11N 1T1R USB Wi-Fi adapter with an external 5dBi antenna capable of delivering up to 33dBm (2000mW) of transmit power. It supports the 802.11b/g/n wireless standards at speeds up to 300Mbps and features security protocols including WEP, WPA, and WPA2. The external antenna provides superior sensitivity and transmit power compared to built-in antennas, and can be upgraded for extended coverage. The USB interface allows installation on Windows and MacOS devices.
The ENS202 is a high-power, long-range wireless access point with a built-in 8dBi dual-polarity directional antenna. It provides wireless speeds up to 300Mbps and a range of up to 400m. The device has advanced security features, multi-operation modes, and is designed for reliable outdoor use in harsh environments. It can be used to build scalable wireless networks for applications like surveillance and industrial IoT.
The document provides information on the EWS320AP wireless access point, including its key features, specifications, and management capabilities. The EWS320AP supports wireless transmission speeds up to 450Mbps on both 2.4GHz and 5GHz bands. It is designed to work with EnGenius wireless management switches for centralized management and advanced wireless functionality.
The document describes the EnGenius Neutron EWS2910P-Kit-300 WLAN starter kit which includes an EWS2910P WLAN controller PoE switch and two EWS300AP indoor managed access points. The kit is designed to create or expand a high-powered Wi-Fi network in large homes or small businesses. The EWS2910P can manage up to 20 access points and provides 8 PoE ports. The EWS300AP supports PoE and ceiling or wall mounting, and connects to the EWS2910P for management and configuration. Key features of the devices include wireless speeds up to 300Mbps, centralized management software, and support for multiple SSIDs and VLANs.
The document describes the EnGenius EWS660AP, a high power outdoor wireless access point. It has dual-band 802.11ac wireless with a maximum speed of 1300Mbps for 5GHz and 450Mbps for 2.4GHz. It is IP55 rated and has an internal high gain antenna. It supports 802.3at Power over Ethernet to allow for flexible installation anywhere with network access. It provides enhanced coverage area through its high power radio and antennas.
The document provides information about the EAP300-CP device from EnGenius Europe. It is a captive portal ready device that offers instant wireless internet access for guests through various authentication methods like vouchers, social media, and email/SMS. It requires zero configuration and is plug-and-play. Additional devices can join its built-in wireless mesh network for extended coverage without needing an Ethernet connection. Key features include 32MB memory, 5dBi antenna, 10/100 Ethernet port, support for 802.11n and various security protocols.
The ENH202 is a high-speed, long-range outdoor wireless access point or bridge that operates on the 2.4GHz band and supports IEEE 802.11b/g/n standards. It features an integrated 10dBi dual polarization antenna and can transmit wireless data at up to 300Mbps. The ENH202 has a high power output of up to 800mW, enabling connectivity over an extended range. It can function as an access point, client bridge, client router, or wireless distribution system bridge.
The document is a datasheet that describes the features and specifications of the EAP900H dual-band wireless access point from EnGenius Europe. It details that the access point supports wireless speeds up to 450Mbps on both the 2.4GHz and 5GHz bands, has internal antennas in a ceiling mount housing, supports AP and WDS modes, 802.3at Power over Ethernet, and can be managed through a web interface or EZ Controller software. It also provides tables listing the radio specifications, physical characteristics, and wireless operating features of the EAP900H.
The EnGenius EAP1750H is a dual-band wireless access point that supports 802.11ac wireless speeds up to 1300Mbps on 5GHz and 450Mbps on 2.4GHz. It has 6 internal antennas and can be powered by Power over Ethernet or an included power adapter. The EAP1750H provides wireless coverage for traffic-intensive applications and includes features such as band steering and fast roaming.
This document provides a quick installation guide for an EnGenius ESR300 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It also lists the minimum requirements which are a broadband internet service, internet browser and wireless adapter. The guide then provides 7 steps for setup which include connecting the router to a modem with an ethernet cable, powering on the devices, locating the wireless network name and password, connecting devices to the network, and accessing the router configuration through a web browser.
The document describes the EnGenius ENH900EXT, a dual-band wireless access point with up to 450Mbps speeds on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE for power and data, and can operate in access point, client bridge, or WDS modes. It also offers features like remote management and firmware upgrading via a web interface.
This document provides a quick installation guide for an EnGenius ESR900 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page in a web browser.
This document provides a quick installation guide for an EnGenius ESR350 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page.
The EnStationAC is a high-powered outdoor wireless access point/client bridge that offers dual PoE Gigabit ports and high-gain directional antennas. It provides 11ac wireless speeds up to 867Mbps over long distances up to 8km point-to-point. It has an IP55-rated waterproof and dustproof casing and two PoE ports to connect and power additional network devices in remote locations. Key features include powerful 5GHz wireless, quality of service for prioritizing applications, and remote monitoring and configuration via EZ Controller software.
This document provides a quick installation guide for an EnGenius ESR1750 wireless router. It lists the package contents which include the router, quick start guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page.
The document provides information about the EPE-48GR PoE injector from EnGenius Europe. It can provide up to 48V/0.8A of power over Ethernet to remotely power devices like wireless access points, IP phones, and webcams. It supports speeds up to 1000Mbps and is designed for outdoor use with low port density installations. Key features include transforming AC power to 48V DC power to inject over CAT5 cable and supporting models ENH210, ENH210EXT, ENH700EXT, EAP600, and ECB600.
The EnGenius ENS1750 is a dual-band wireless AC1750 outdoor access point that provides speeds up to 450Mbps on 2.4GHz and 1300Mbps on 5GHz. It functions as a standalone access point or as part of EnGenius' business-class networking products. Key features include dual concurrent radios, high transmit power, support for 802.11ac and 802.3at Power over Ethernet, and an IP55 weatherproof rating making it suitable for outdoor deployment.
The EnStation5 is an outdoor wireless device that provides wireless connectivity up to 300Mbps. It has a powerful 5GHz radio and a high-gain 19dBi directional antenna. It can operate in access point, client bridge, client router, and WDS modes. The EnStation5 integrates with EnGenius' management software and offers security, monitoring, and management features to ensure optimal user experience over long-range wireless connections.
The document is a datasheet for the EAP1200H wireless access point. It provides specifications for the device such as supporting wireless standards up to 802.11ac with speeds up to 867Mbps, dual-radio support, Power-over-Ethernet support, security features, and management features for configuration and monitoring. It includes details on wireless capabilities, antenna configuration, interface and port options, dimensions, mounting options, and environmental specifications.
The document provides information about the EnGenius ENS1200, a dual band wireless AC1200 outdoor access point. It has speeds up to 300Mbps on 2.4GHz and 866Mbps on 5GHz. Key features include dual concurrent radios, high transmit power, enhanced receive sensitivity, internal high gain antennas, various operation modes, and support for 802.11 standards. It is suitable for providing outdoor wireless access and connectivity for small to medium businesses.
The EUB9603H is a high power 11N 1T1R USB Wi-Fi adapter with an external 5dBi antenna capable of delivering up to 33dBm (2000mW) of transmit power. It supports the 802.11b/g/n wireless standards at speeds up to 300Mbps and features security protocols including WEP, WPA, and WPA2. The external antenna provides superior sensitivity and transmit power compared to built-in antennas, and can be upgraded for extended coverage. The USB interface allows installation on Windows and MacOS devices.
The ENS202 is a high-power, long-range wireless access point with a built-in 8dBi dual-polarity directional antenna. It provides wireless speeds up to 300Mbps and a range of up to 400m. The device has advanced security features, multi-operation modes, and is designed for reliable outdoor use in harsh environments. It can be used to build scalable wireless networks for applications like surveillance and industrial IoT.
The document provides information on the EWS320AP wireless access point, including its key features, specifications, and management capabilities. The EWS320AP supports wireless transmission speeds up to 450Mbps on both 2.4GHz and 5GHz bands. It is designed to work with EnGenius wireless management switches for centralized management and advanced wireless functionality.
The document describes the EnGenius Neutron EWS2910P-Kit-300 WLAN starter kit which includes an EWS2910P WLAN controller PoE switch and two EWS300AP indoor managed access points. The kit is designed to create or expand a high-powered Wi-Fi network in large homes or small businesses. The EWS2910P can manage up to 20 access points and provides 8 PoE ports. The EWS300AP supports PoE and ceiling or wall mounting, and connects to the EWS2910P for management and configuration. Key features of the devices include wireless speeds up to 300Mbps, centralized management software, and support for multiple SSIDs and VLANs.
The document describes the EnGenius EWS660AP, a high power outdoor wireless access point. It has dual-band 802.11ac wireless with a maximum speed of 1300Mbps for 5GHz and 450Mbps for 2.4GHz. It is IP55 rated and has an internal high gain antenna. It supports 802.3at Power over Ethernet to allow for flexible installation anywhere with network access. It provides enhanced coverage area through its high power radio and antennas.
The document provides information about the EAP300-CP device from EnGenius Europe. It is a captive portal ready device that offers instant wireless internet access for guests through various authentication methods like vouchers, social media, and email/SMS. It requires zero configuration and is plug-and-play. Additional devices can join its built-in wireless mesh network for extended coverage without needing an Ethernet connection. Key features include 32MB memory, 5dBi antenna, 10/100 Ethernet port, support for 802.11n and various security protocols.
The ENH202 is a high-speed, long-range outdoor wireless access point or bridge that operates on the 2.4GHz band and supports IEEE 802.11b/g/n standards. It features an integrated 10dBi dual polarization antenna and can transmit wireless data at up to 300Mbps. The ENH202 has a high power output of up to 800mW, enabling connectivity over an extended range. It can function as an access point, client bridge, client router, or wireless distribution system bridge.
The document is a datasheet that describes the features and specifications of the EAP900H dual-band wireless access point from EnGenius Europe. It details that the access point supports wireless speeds up to 450Mbps on both the 2.4GHz and 5GHz bands, has internal antennas in a ceiling mount housing, supports AP and WDS modes, 802.3at Power over Ethernet, and can be managed through a web interface or EZ Controller software. It also provides tables listing the radio specifications, physical characteristics, and wireless operating features of the EAP900H.
The EnGenius EAP1750H is a dual-band wireless access point that supports 802.11ac wireless speeds up to 1300Mbps on 5GHz and 450Mbps on 2.4GHz. It has 6 internal antennas and can be powered by Power over Ethernet or an included power adapter. The EAP1750H provides wireless coverage for traffic-intensive applications and includes features such as band steering and fast roaming.
This document provides a quick installation guide for an EnGenius ESR300 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It also lists the minimum requirements which are a broadband internet service, internet browser and wireless adapter. The guide then provides 7 steps for setup which include connecting the router to a modem with an ethernet cable, powering on the devices, locating the wireless network name and password, connecting devices to the network, and accessing the router configuration through a web browser.
The document describes the EnGenius ENH900EXT, a dual-band wireless access point with up to 450Mbps speeds on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE for power and data, and can operate in access point, client bridge, or WDS modes. It also offers features like remote management and firmware upgrading via a web interface.
This document provides a quick installation guide for an EnGenius ESR900 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page in a web browser.
This document provides a quick installation guide for an EnGenius ESR350 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page.
The EnStationAC is a high-powered outdoor wireless access point/client bridge that offers dual PoE Gigabit ports and high-gain directional antennas. It provides 11ac wireless speeds up to 867Mbps over long distances up to 8km point-to-point. It has an IP55-rated waterproof and dustproof casing and two PoE ports to connect and power additional network devices in remote locations. Key features include powerful 5GHz wireless, quality of service for prioritizing applications, and remote monitoring and configuration via EZ Controller software.
This document provides a quick installation guide for an EnGenius ESR1750 wireless router. It lists the package contents which include the router, quick start guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page.
The document provides information about the EPE-48GR PoE injector from EnGenius Europe. It can provide up to 48V/0.8A of power over Ethernet to remotely power devices like wireless access points, IP phones, and webcams. It supports speeds up to 1000Mbps and is designed for outdoor use with low port density installations. Key features include transforming AC power to 48V DC power to inject over CAT5 cable and supporting models ENH210, ENH210EXT, ENH700EXT, EAP600, and ECB600.
The EnGenius ENS1750 is a dual-band wireless AC1750 outdoor access point that provides speeds up to 450Mbps on 2.4GHz and 1300Mbps on 5GHz. It functions as a standalone access point or as part of EnGenius' business-class networking products. Key features include dual concurrent radios, high transmit power, support for 802.11ac and 802.3at Power over Ethernet, and an IP55 weatherproof rating making it suitable for outdoor deployment.
The EnStation5 is an outdoor wireless device that provides wireless connectivity up to 300Mbps. It has a powerful 5GHz radio and a high-gain 19dBi directional antenna. It can operate in access point, client bridge, client router, and WDS modes. The EnStation5 integrates with EnGenius' management software and offers security, monitoring, and management features to ensure optimal user experience over long-range wireless connections.
The EnStation2 is an outdoor wireless device from EnGenius Europe that provides wireless connectivity of up to 300Mbps. It has a high gain directional antenna, supports four operation modes, and can be managed through EZ Controller software. The EnStation2 offers security features like WEP, WPA, WPA2 encryption as well as authentication protocols to enforce security.
The document provides information about the EnGenius EPG5000 wireless gateway. It has the latest 802.11ac technology and can deliver wireless speeds up to 1.75Gbps. It supports the next generation IPv6 standard and includes security features like WPA/WPA2 encryption. The EPG5000 also functions as an Internet of Things gateway and works with EnGenius' cloud service to remotely monitor and configure connected devices over a home network through mobile apps.
The EAP350v2 is a wireless-N ceiling mount access point that delivers data rates up to 300Mbps. It offers extended wireless coverage over at least 3 floors, strong wireless signal penetration, secure network management with VLAN and MSSID, and easy setup with standard PoE and an internal 5dBi antenna. Key features include 32MB memory, 4MB flash, Gigabit LAN port, WEP, WPA/WPA2, MAC address filtering, 802.1x authentication, and WMM QoS.
The EAP350 is a wireless access point that delivers data rates up to 300Mbps. It offers extended wireless coverage of at least 3 floors, strong wireless signal penetration, secure network management features, and supports PoE for flexible internet connectivity. Key features include dual internal 5dBi antennas, Gigabit LAN port, various wireless security protocols, QoS, and support for access point, WDS AP, and WDS bridge operation modes.
The EnGenius EWS510AP is a dual-band wireless access point and 4-port switch that is designed to be installed in wall plates for providing wireless and wired connectivity in hotel rooms, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and has internal antennas. It can operate as a standalone access point or be centrally managed as part of a larger wireless network. The device has one uplink port, three downstream ports, and a Power over Ethernet port to power devices like phones.
The document provides information on the ENH1750EXT outdoor wireless access point, including its key features, specifications, and compliance. The ENH1750EXT has dual-band 802.11ac and 802.11n wireless with speeds up to 1300Mbps, supports PoE, has two Gigabit Ethernet ports, and has an IP68-rated waterproof housing designed for harsh outdoor environments. It provides flexibility through its ability to configure each radio into different modes and supports various security and authentication standards to enforce security.
The document describes the EnGenius Neutron EWS300AP wireless access point. It is an affordable single-band 802.11n access point that can operate as a standalone device or as part of a scalable EnGenius Neutron wireless network management solution. It provides wireless speeds up to 300Mbps for large homes and small businesses. Key features include support for 802.11b/g/n, Power over Ethernet, two internal antennas, a Gigabit Ethernet port, and ceiling or wall mounting. It can be centrally managed by EnGenius' ezMaster software.
The EWS650AP is an outdoor dual-band 11ac wireless access point that provides speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. It has a high power transmitter and internal antennas for extended outdoor wireless coverage. The access point can operate as a standalone device or be centrally managed as part of a scalable wireless network solution using EnGenius management software and switches. It features an IP55-rated weatherproof enclosure to withstand harsh outdoor environments.
The EnGenius ESR900 is a dual band wireless N900 router that provides wireless speeds up to 900Mbps and gigabit wired speeds. It has a USB port for sharing content and connecting storage devices. The router has extended wireless range for connectivity throughout the home and includes security features like encryption and firewalls. It allows for multiple wireless networks and customization of network access.
This document provides information on the EnGenius ECB1200 dual-band concurrent access point/client bridge, including its key features, specifications, operation modes, and security features. The ECB1200 supports data rates up to 867Mbps on the 5GHz band and 300Mbps on the 2.4GHz band. It has dual detachable antennas for each band and can operate in access point, client bridge, or WDS modes. Security features include WEP, WPA/WPA2, MAC address filtering, and HTTPS/SSH support.
The EnGenius EWS500AP is a wall plate access point and switch that provides wireless connectivity, Power-over-Ethernet, and wired ports for in-room devices in hotels, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and can operate as a standalone access point or be centrally managed. The compact design mounts onto a standard junction box and includes antennas, PoE ports, and additional ports to support IPTVs, phones, and other wired devices without extra equipment.
The document describes the EnGenius EPA2406FP PoE adapter, which provides power and networking over a single Ethernet cable. It can power devices up to 100 meters away, reducing installation costs and time. Key features include compatibility with passive 24V devices, overcurrent protection, and the ability to power devices that require up to 24V/0.6A of power, such as wireless access points or IP cameras. Specifications include an input voltage of 100-240V AC, output of up to 14.4W, operating temperature range of 0-40°C, and dimensions of 100x58.4x33.4mm.
The document provides information on the EnGenius ENH710EXT, a dual-band wireless access point with speeds up to 300Mbps on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE and remote reset functionality. It also supports AP, client bridge and WDS modes for flexible deployment and can be managed through a web interface or EnGenius Zone Controller software.
The document provides information on the EnGenius EWS5912FP wireless management switch. It can manage up to 50 wireless access points and provides 8 Gigabit PoE ports. It offers an intuitive GUI for easily monitoring and configuring a wireless network, including features like topology view, floor plan view, map view, and remote access point rebooting and firmware upgrades. The switch integrates seamlessly into existing networks and provides advanced wireless capabilities such as band steering, fast roaming, and mesh networking.
The document is a product catalogue from EnGenius that includes:
- An index listing various product series such as outdoor business solutions, indoor business solutions, PoE switches, and digital cordless phones.
- Information about EnGenius and their expertise in long range wireless solutions.
- Descriptions and specifications for several product series, including custom series for unique deployments, outdoor access points, indoor access points, and PoE switches.
- An example use case of EnGenius wireless products providing a reliable network for a music festival organization.
The EnGenius 802.3at/af Gigabit PoE adapter extends power and networking to devices up to 328 feet away over a single CAT5/6 cable. It delivers up to 30W of power for devices like access points, IP cameras, and VoIP phones. The compact adapter has surge protection and supports both 10/100/1000 Ethernet and Power over Ethernet for flexible deployment of network devices in locations without power outlets.
The EnGenius passive 54V Gigabit PoE adapter extends power and networking to devices up to 328 feet away over a single cable. It provides up to 32.8 watts of power for devices like access points and IP cameras while also supporting high-speed Gigabit Ethernet connectivity. The compact adapter has surge protection to safeguard connected equipment from power issues and includes wall mounting hardware for flexible installation.
This document provides installation instructions for the EnGenius EWS650AP managed indoor access point. It outlines how to connect the access point to a computer or EnGenius wireless management switch to configure its IP address and settings. Instructions are given for stand-alone installation without a management switch as well as mounting options including wall mounting and pole mounting.
This document provides installation instructions for the EnGenius EWS350AP managed indoor access point. It describes how to connect the access point to a computer or EnGenius wireless management switch to configure it. It also explains how to mount the access point to a wall or ceiling using the included mounting bracket or T-rail connectors. Setup steps include configuring the computer's IP address, logging into the access point's web interface using the default credentials, and selecting the access point operation mode.
This document provides instructions for installing and setting up the EnStationAC device. It includes a list of package contents and minimum requirements. It then provides step-by-step instructions for connecting the EnStationAC device, setting up the computer network configuration, accessing the EnStationAC's web interface, and selecting an operating mode. It also includes instructions for wall mounting or pole mounting the EnStationAC unit.
This document provides an overview and instructions for installing and using ezMaster, a centralized network management system for EnGenius Neutron Series access points. It describes the ezMaster software, compatible access points, deployment scenarios, system requirements, and instructions for importing the ezMaster virtual machine image. It also outlines the main dashboard, device management features, monitoring, visualization, statistics, and maintenance capabilities available in ezMaster.
The Neutron-series distributed network management solution from EnGenius offers complete scalability, unlimited flexibility, and lower costs compared to other solutions. It allows users to manage from 1 to 1,000+ access points and switches, with 10,000+ concurrent users across unlimited distributed networks. The solution includes Neutron managed access points, Neutron WLAN controller switches, and ezMaster centralized network management software. It provides simplified deployment and management, optimized wireless performance, and enterprise-class features at an affordable price point with no access point licensing fees.
The document provides information about the EnGenius Neutron EWS2910P WLAN controller switch, which is an 8-port Gigabit PoE Layer 2 switch with two dual-speed SFP fiber uplink ports. It can discover, configure, manage and monitor up to 20 EnGenius Neutron access points through its web-based interface. Key features include wireless management capabilities, Layer 2 features, and technical specifications such as 802.3af PoE support and an operating temperature range of 0 to 50°C.
This document provides instructions for quickly installing an EnGenius EWS300AP managed indoor access point. It lists the package contents and minimum requirements. The steps explain how to connect the access point to a computer via an EnGenius wireless management switch in order to obtain an IP address for configuration. It also provides instructions for mounting the access point to a wall or ceiling using either a mounting bracket or T-rail connectors.
This document provides instructions for quickly installing an EnGenius EWS500AP managed indoor access point. It outlines unpacking the contents, minimum system requirements, connecting the access point to a PoE switch via Ethernet cable, configuring the IP address and management switch, mounting the access point to a wall or outlet box, and connecting it using a 110 punch-down block as an alternative to the Ethernet port. The instructions are separated into clear steps to guide the user through the swift setup and deployment of the new access point.
This document provides instructions for quickly installing an EnGenius EWS510AP managed indoor access point. It outlines unpacking the contents, minimum system requirements, connecting the access point to a PoE switch via Ethernet cable, configuring the IP address and management switch, mounting the access point to a wall or electrical box, and connecting it using a 110 punch-down block as an alternative to the Ethernet port. The instructions are separated into clear steps to guide the user through a simple installation process.
The document is a quick installation guide for an EnGenius EWS2910P wireless management switch. It includes instructions on unpacking the package contents, installing the switch on a flat surface or wall, connecting the switch to a computer and access points, configuring the IP addresses, accessing the management interface, locating and managing connected access points, and managing the switch configuration. Setup and management can be done through a web browser-based graphical user interface.
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
"Scaling RAG Applications to serve millions of users", Kevin GoedeckeFwdays
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
Session 1 - Intro to Robotic Process Automation.pdfUiPathCommunity
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Northern Engraving | Modern Metal Trim, Nameplates and Appliance PanelsNorthern Engraving
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
Introducing BoxLang : A new JVM language for productivity and modularity!Ortus Solutions, Corp
Just like life, our code must adapt to the ever changing world we live in. From one day coding for the web, to the next for our tablets or APIs or for running serverless applications. Multi-runtime development is the future of coding, the future is to be dynamic. Let us introduce you to BoxLang.
Dynamic. Modular. Productive.
BoxLang redefines development with its dynamic nature, empowering developers to craft expressive and functional code effortlessly. Its modular architecture prioritizes flexibility, allowing for seamless integration into existing ecosystems.
Interoperability at its Core
With 100% interoperability with Java, BoxLang seamlessly bridges the gap between traditional and modern development paradigms, unlocking new possibilities for innovation and collaboration.
Multi-Runtime
From the tiny 2m operating system binary to running on our pure Java web server, CommandBox, Jakarta EE, AWS Lambda, Microsoft Functions, Web Assembly, Android and more. BoxLang has been designed to enhance and adapt according to it's runnable runtime.
The Fusion of Modernity and Tradition
Experience the fusion of modern features inspired by CFML, Node, Ruby, Kotlin, Java, and Clojure, combined with the familiarity of Java bytecode compilation, making BoxLang a language of choice for forward-thinking developers.
Empowering Transition with Transpiler Support
Transitioning from CFML to BoxLang is seamless with our JIT transpiler, facilitating smooth migration and preserving existing code investments.
Unlocking Creativity with IDE Tools
Unleash your creativity with powerful IDE tools tailored for BoxLang, providing an intuitive development experience and streamlining your workflow. Join us as we embark on a journey to redefine JVM development. Welcome to the era of BoxLang.
"What does it really mean for your system to be available, or how to define w...Fwdays
We will talk about system monitoring from a few different angles. We will start by covering the basics, then discuss SLOs, how to define them, and why understanding the business well is crucial for success in this exercise.
AppSec PNW: Android and iOS Application Security with MobSFAjin Abraham
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...AlexanderRichford
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation Functions to Prevent Interaction with Malicious QR Codes.
Aim of the Study: The goal of this research was to develop a robust hybrid approach for identifying malicious and insecure URLs derived from QR codes, ensuring safe interactions.
This is achieved through:
Machine Learning Model: Predicts the likelihood of a URL being malicious.
Security Validation Functions: Ensures the derived URL has a valid certificate and proper URL format.
This innovative blend of technology aims to enhance cybersecurity measures and protect users from potential threats hidden within QR codes 🖥 🔒
This study was my first introduction to using ML which has shown me the immense potential of ML in creating more secure digital environments!
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
AI in the Workplace Reskilling, Upskilling, and Future Work.pptxSunil Jagani
Discover how AI is transforming the workplace and learn strategies for reskilling and upskilling employees to stay ahead. This comprehensive guide covers the impact of AI on jobs, essential skills for the future, and successful case studies from industry leaders. Embrace AI-driven changes, foster continuous learning, and build a future-ready workforce.
Read More - https://bit.ly/3VKly70
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor IvaniukFwdays
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdfleebarnesutopia
So… you want to become a Test Automation Engineer (or hire and develop one)? While there’s quite a bit of information available about important technical and tool skills to master, there’s not enough discussion around the path to becoming an effective Test Automation Engineer that knows how to add VALUE. In my experience this had led to a proliferation of engineers who are proficient with tools and building frameworks but have skill and knowledge gaps, especially in software testing, that reduce the value they deliver with test automation.
In this talk, Lee will share his lessons learned from over 30 years of working with, and mentoring, hundreds of Test Automation Engineers. Whether you’re looking to get started in test automation or just want to improve your trade, this talk will give you a solid foundation and roadmap for ensuring your test automation efforts continuously add value. This talk is equally valuable for both aspiring Test Automation Engineers and those managing them! All attendees will take away a set of key foundational knowledge and a high-level learning path for leveling up test automation skills and ensuring they add value to their organizations.
inQuba Webinar Mastering Customer Journey Management with Dr Graham HillLizaNolte
HERE IS YOUR WEBINAR CONTENT! 'Mastering Customer Journey Management with Dr. Graham Hill'. We hope you find the webinar recording both insightful and enjoyable.
In this webinar, we explored essential aspects of Customer Journey Management and personalization. Here’s a summary of the key insights and topics discussed:
Key Takeaways:
Understanding the Customer Journey: Dr. Hill emphasized the importance of mapping and understanding the complete customer journey to identify touchpoints and opportunities for improvement.
Personalization Strategies: We discussed how to leverage data and insights to create personalized experiences that resonate with customers.
Technology Integration: Insights were shared on how inQuba’s advanced technology can streamline customer interactions and drive operational efficiency.
inQuba Webinar Mastering Customer Journey Management with Dr Graham Hill
Datasheet EnGenius EAP600
1. EnGenius Europe | Veldzigt 28, 3454 PW De Meern, The Netherlands
0900-9434222 (0900-WIFIABC) | www.engenius-europe.com
Disclaimer: Information may be subject to changes without prior notification
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
Datasheet
EAP600
• Frequency band 2.4GHz + 5GHz
• 300Mbps + 300Mbps
• 4* Internal 5dBi antenna
• AP/WDS mode
The EAP600 is a wireless-11n 600Mbps (300Mbps+300Mbps) high power dual band concurrent
ceiling mount access point. It allows simultaneous operation of 2.4GHz and 5GHz wireless
network. With media-optimized performance, you can enjoy Internet surfing more smoothly, with
less lag.
Maxima 29dBm high power transmission provides extended coverage in your environment.
MSSID+VLAN settings makes your data more secure and easy to manage. Standard PoE
interoperable with 802.3af makes Internet connection more flexible.
The EAP600 designed with a slim and white color outlook, will not violate with your interior
decoration. Multiple mounting types provides user friendly installation. The EAP600 is perfect
choice in home and small business.
Key features
2. EnGenius Europe | Veldzigt 28, 3454 PW De Meern, The Netherlands
0900-9434222 (0900-WIFIABC) | www.engenius-europe.com
Disclaimer: Information may be subject to changes without prior notification
https://www.linkedin.com/company/engeniuseurope
https://plus.google.com/+EngeniusEuropeBVDeMeern
https://www.youtube.com/user/engeniuseuropebv
https://twitter.com/engeniuseu
Datasheet
EAP600
Hardware
Memory: 64MB
Flash: 8MB
Antenna
4* Internal 5dBi MIMO antenna
Physical interface
LAN: 1* 10/100/1000 Gigabit
(802.3af PoE standard supported)
Reset button
Power jack
Power requirement
Adapter: 12V/1A
Frequency band
2.4GHz + 5GHz
Data rate
Up to 600Mbps (300Mbps+300Mbps)
Software
Operation modes
Access point/WDS/WDS/AP/WDS Bridge
Wireless/Network
Wireless mode - 11 a / 11b / 11g / 11n
Channel selection (Setting varies by Country)
Channel bandwidth (Auto, 20Mhz, 40Mhz)
Transmission rate - 11n only, 11b/g/n mix,
11b only, 11b/g, 11g
5GHz: 11n only mode, 11a/n mix mode,
11a only
Security
WEP (64/128bit)
WPA/WPA2: TKIP/AES
MAC address filtering (WLAN, up to 50 fields)
802.1x Authenticator MD5/TLS/TTLS, PEAP
QoS (Quality of Service)
WMM (Wireless Multimedia)
Environment & mechanical
Temperature range:
0 to 50°C - Operating
-20 to 60°C - Storage
Humidity (non-condensing):
90% or less - Operating
90% or less - Storage
Package contents
EAP600
Power adapter (12V/1A)
CD with users manual
QiG
Ethernet cable
T-Rail mounting kit
Ceiling/Wall mount screw kit
Mounting bracket