Datasheet EnGenius ECB300
•
0 likes•103 views
The document provides information on the EnGenius ECB300 wireless access point/client bridge. It lists the key features and specifications of the ECB300 including that it operates in the 2.4GHz frequency band, has a data rate up to 300Mbps, includes two external 5dBi antennas, has various operation modes, supports WEP, WPA/WPA2, MAC address filtering, 802.1x authentication, and WMM QoS. It also provides details on the hardware, interfaces, power requirements, and packaging contents of the ECB300.
Report
Share
Report
Share
Download to read offline
Recommended
Datasheet EnGenius EAP300
The EAP300 is a wireless access point that provides WiFi coverage of up to 300Mbps across 3 floors. It has features such as MSSID, VLAN, 802.3af PoE, a ceiling mount design, 32MB memory, 4MB flash, and 2 internal 5dBi antennas. The EAP300 supports common wireless standards including 802.11b, 802.11g, and 802.11n, with security options like WEP, WPA/WPA2, and 802.1x authentication. It is suitable for both home and office use by providing extended wireless coverage and a simple setup process.
Datasheet EnGenius ENH500
The ENH500 is an outdoor wireless CPE device that can support up to 50 clients and deliver wireless connections over long ranges of up to 25km. It has a high power 13dBi dual polarization antenna and supports various operation modes. The ENH500 is designed to operate reliably in outdoor environments and provide security features to ensure safe wireless connectivity. It can transfer data at up to 300Mbps and includes features such as VLAN support, QoS, and wireless security protocols.
EnGenius Europe Datasheet ECB1750
Datasheet of the EnGenius ECB1750 - 802.11ac/a/b/g/n dual radio concurrent Access Point/Client Bridge/WDS
Datasheet EnGenius EWS660AP
The document describes the EnGenius EWS660AP, a high power outdoor wireless access point. It has dual-band 802.11ac wireless with a maximum speed of 1300Mbps for 5GHz and 450Mbps for 2.4GHz. It is IP55 rated and has an internal high gain antenna. It supports 802.3at Power over Ethernet to allow for flexible installation anywhere with network access. It provides enhanced coverage area through its high power radio and antennas.
Datasheet EnGenius ECB350
The EnGenius ECB350 is a wireless-n multi-function gigabit access point that delivers data transfer rates up to 300Mbps. It offers extended wireless coverage through external 5dBi antennas, secure network management through multiple SSIDs and VLANs, and flexible power options through 802.3af PoE support. The ECB350 provides 8 operation modes and is suitable for expanding existing networks or increasing bandwidth for additional users.
Datasheet EAP1200H
The document is a datasheet for the EAP1200H wireless access point. It provides specifications for the device such as supporting wireless standards up to 802.11ac with speeds up to 867Mbps, dual-radio support, Power-over-Ethernet support, security features, and management features for configuration and monitoring. It includes details on wireless capabilities, antenna configuration, interface and port options, dimensions, mounting options, and environmental specifications.
Datasheet EWS860AP
Datasheet of EnGenius EWS860AP - Neutron Series Dual Band Wireless AC1750 Managed Outdoor Access Point
Datasheet EnGenius EAP300v2
The document is a datasheet for the EAP300v2 access point from EnGenius Europe. It summarizes the key features and specifications of the EAP300v2 including its support for 802.11b/g/n wireless standards at speeds up to 300Mbps, Power-over-Ethernet support, ability to operate in access point, WDS, or repeater modes, security features, antennas, interfaces, dimensions, and environmental specifications. It also provides details on the radio specifications, wireless features, physical characteristics, and management capabilities.
Recommended
Datasheet EnGenius EAP300
The EAP300 is a wireless access point that provides WiFi coverage of up to 300Mbps across 3 floors. It has features such as MSSID, VLAN, 802.3af PoE, a ceiling mount design, 32MB memory, 4MB flash, and 2 internal 5dBi antennas. The EAP300 supports common wireless standards including 802.11b, 802.11g, and 802.11n, with security options like WEP, WPA/WPA2, and 802.1x authentication. It is suitable for both home and office use by providing extended wireless coverage and a simple setup process.
Datasheet EnGenius ENH500
The ENH500 is an outdoor wireless CPE device that can support up to 50 clients and deliver wireless connections over long ranges of up to 25km. It has a high power 13dBi dual polarization antenna and supports various operation modes. The ENH500 is designed to operate reliably in outdoor environments and provide security features to ensure safe wireless connectivity. It can transfer data at up to 300Mbps and includes features such as VLAN support, QoS, and wireless security protocols.
EnGenius Europe Datasheet ECB1750
Datasheet of the EnGenius ECB1750 - 802.11ac/a/b/g/n dual radio concurrent Access Point/Client Bridge/WDS
Datasheet EnGenius EWS660AP
The document describes the EnGenius EWS660AP, a high power outdoor wireless access point. It has dual-band 802.11ac wireless with a maximum speed of 1300Mbps for 5GHz and 450Mbps for 2.4GHz. It is IP55 rated and has an internal high gain antenna. It supports 802.3at Power over Ethernet to allow for flexible installation anywhere with network access. It provides enhanced coverage area through its high power radio and antennas.
Datasheet EnGenius ECB350
The EnGenius ECB350 is a wireless-n multi-function gigabit access point that delivers data transfer rates up to 300Mbps. It offers extended wireless coverage through external 5dBi antennas, secure network management through multiple SSIDs and VLANs, and flexible power options through 802.3af PoE support. The ECB350 provides 8 operation modes and is suitable for expanding existing networks or increasing bandwidth for additional users.
Datasheet EAP1200H
The document is a datasheet for the EAP1200H wireless access point. It provides specifications for the device such as supporting wireless standards up to 802.11ac with speeds up to 867Mbps, dual-radio support, Power-over-Ethernet support, security features, and management features for configuration and monitoring. It includes details on wireless capabilities, antenna configuration, interface and port options, dimensions, mounting options, and environmental specifications.
Datasheet EWS860AP
Datasheet of EnGenius EWS860AP - Neutron Series Dual Band Wireless AC1750 Managed Outdoor Access Point
Datasheet EnGenius EAP300v2
The document is a datasheet for the EAP300v2 access point from EnGenius Europe. It summarizes the key features and specifications of the EAP300v2 including its support for 802.11b/g/n wireless standards at speeds up to 300Mbps, Power-over-Ethernet support, ability to operate in access point, WDS, or repeater modes, security features, antennas, interfaces, dimensions, and environmental specifications. It also provides details on the radio specifications, wireless features, physical characteristics, and management capabilities.
Datasheet EnGenius ENH900EXT
The document describes the EnGenius ENH900EXT, a dual-band wireless access point with up to 450Mbps speeds on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE for power and data, and can operate in access point, client bridge, or WDS modes. It also offers features like remote management and firmware upgrading via a web interface.
Datasheet EnGenius ENH202
The ENH202 is a high-speed, long-range outdoor wireless access point or bridge that operates on the 2.4GHz band and supports IEEE 802.11b/g/n standards. It features an integrated 10dBi dual polarization antenna and can transmit wireless data at up to 300Mbps. The ENH202 has a high power output of up to 800mW, enabling connectivity over an extended range. It can function as an access point, client bridge, client router, or wireless distribution system bridge.
Datasheet ENS1200
The document provides information about the EnGenius ENS1200, a dual band wireless AC1200 outdoor access point. It has speeds up to 300Mbps on 2.4GHz and 866Mbps on 5GHz. Key features include dual concurrent radios, high transmit power, enhanced receive sensitivity, internal high gain antennas, various operation modes, and support for 802.11 standards. It is suitable for providing outdoor wireless access and connectivity for small to medium businesses.
Datasheet EnGenius EnStation2
The EnStation2 is an outdoor wireless device from EnGenius Europe that provides wireless connectivity of up to 300Mbps. It has a high gain directional antenna, supports four operation modes, and can be managed through EZ Controller software. The EnStation2 offers security features like WEP, WPA, WPA2 encryption as well as authentication protocols to enforce security.
Datasheet EnGenius EAP1750H
The EnGenius EAP1750H is a dual-band wireless access point that supports 802.11ac wireless speeds up to 1300Mbps on 5GHz and 450Mbps on 2.4GHz. It has 6 internal antennas and can be powered by Power over Ethernet or an included power adapter. The EAP1750H provides wireless coverage for traffic-intensive applications and includes features such as band steering and fast roaming.
Datasheet EnGenius EAP600
Datasheet, specifications of the EnGenius EAP600 - Wireless-11N 600Mbps high power dual band concurrent ceiling mount AP.
Datasheet EWS350AP
The document provides information on the EnGenius EWS350AP dual-band 802.11ac indoor access point. It can operate as a standalone access point or as part of a scalable wireless network management solution. Key features include speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz, high transmit power for expanded coverage, and support for up to 8 SSIDs and VLAN tagging per radio. It also supports centralized management and reporting via the optional ezMaster software.
Datasheet EnGenius ENH1750EXT
The document provides information on the ENH1750EXT outdoor wireless access point, including its key features, specifications, and compliance. The ENH1750EXT has dual-band 802.11ac and 802.11n wireless with speeds up to 1300Mbps, supports PoE, has two Gigabit Ethernet ports, and has an IP68-rated waterproof housing designed for harsh outdoor environments. It provides flexibility through its ability to configure each radio into different modes and supports various security and authentication standards to enforce security.
Datasheet EWS510AP
The EnGenius EWS510AP is a dual-band wireless access point and 4-port switch that is designed to be installed in wall plates for providing wireless and wired connectivity in hotel rooms, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and has internal antennas. It can operate as a standalone access point or be centrally managed as part of a larger wireless network. The device has one uplink port, three downstream ports, and a Power over Ethernet port to power devices like phones.
Datasheet ENS1750
The EnGenius ENS1750 is a dual-band wireless AC1750 outdoor access point that provides speeds up to 450Mbps on 2.4GHz and 1300Mbps on 5GHz. It functions as a standalone access point or as part of EnGenius' business-class networking products. Key features include dual concurrent radios, high transmit power, support for 802.11ac and 802.3at Power over Ethernet, and an IP55 weatherproof rating making it suitable for outdoor deployment.
Datasheet EnGenius ECB600
The document is a datasheet for the ECB600 wireless access point/client bridge from EnGenius Europe. It provides key details about the device such as its operating frequencies, data rates up to 600Mbps, support for 802.11a/b/g/n standards, inclusion of 4 external antennas, gigabit Ethernet port, ability to operate as an access point or repeater, security features, and environmental specifications. The ECB600 allows for simultaneous dual band wireless connectivity on both 2.4GHz and 5GHz frequencies with a range of up to 29dBm.
Datasheet EWS500AP
The EnGenius EWS500AP is a wall plate access point and switch that provides wireless connectivity, Power-over-Ethernet, and wired ports for in-room devices in hotels, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and can operate as a standalone access point or be centrally managed. The compact design mounts onto a standard junction box and includes antennas, PoE ports, and additional ports to support IPTVs, phones, and other wired devices without extra equipment.
Datasheet EAP300-CP
The document provides information about the EAP300-CP device from EnGenius Europe. It is a captive portal ready device that offers instant wireless internet access for guests through various authentication methods like vouchers, social media, and email/SMS. It requires zero configuration and is plug-and-play. Additional devices can join its built-in wireless mesh network for extended coverage without needing an Ethernet connection. Key features include 32MB memory, 5dBi antenna, 10/100 Ethernet port, support for 802.11n and various security protocols.
Datasheet EnGenius EAP900H
The document is a datasheet that describes the features and specifications of the EAP900H dual-band wireless access point from EnGenius Europe. It details that the access point supports wireless speeds up to 450Mbps on both the 2.4GHz and 5GHz bands, has internal antennas in a ceiling mount housing, supports AP and WDS modes, 802.3at Power over Ethernet, and can be managed through a web interface or EZ Controller software. It also provides tables listing the radio specifications, physical characteristics, and wireless operating features of the EAP900H.
Datasheet EPE4818G
The EnGenius EPE-4818G is a PoE injector that provides power and network connectivity to PoE devices over Ethernet cables up to 300 feet long. It has one Gigabit Ethernet port to connect to a network switch and one PoE output port, and can supply up to 24W of power through the cable. This allows wireless access points and other PoE devices to be installed in places without access to power outlets.
Datasheet ECB1200
This document provides information on the EnGenius ECB1200 dual-band concurrent access point/client bridge, including its key features, specifications, operation modes, and security features. The ECB1200 supports data rates up to 867Mbps on the 5GHz band and 300Mbps on the 2.4GHz band. It has dual detachable antennas for each band and can operate in access point, client bridge, or WDS modes. Security features include WEP, WPA/WPA2, MAC address filtering, and HTTPS/SSH support.
Datasheet EnGenius EnStation5
The EnStation5 is an outdoor wireless device that provides wireless connectivity up to 300Mbps. It has a powerful 5GHz radio and a high-gain 19dBi directional antenna. It can operate in access point, client bridge, client router, and WDS modes. The EnStation5 integrates with EnGenius' management software and offers security, monitoring, and management features to ensure optimal user experience over long-range wireless connections.
Quick Installation Guide ESR300 English
This document provides a quick installation guide for an EnGenius ESR300 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It also lists the minimum requirements which are a broadband internet service, internet browser and wireless adapter. The guide then provides 7 steps for setup which include connecting the router to a modem with an ethernet cable, powering on the devices, locating the wireless network name and password, connecting devices to the network, and accessing the router configuration through a web browser.
Quick Installation Guide ESR350 English
This document provides a quick installation guide for an EnGenius ESR350 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page.
Sales presentation EnStation2 - EnStation 5
The document provides information about EnStation2 and EnStation5 wireless outdoor CPE products, including key specifications, features, selling points, and target markets. The EnStation series features high gain directional antennas, high output power, long transmission ranges up to 10km, various operation modes, and management via EZ Controller software. They are suited for applications requiring long range point-to-point wireless links such as internet access, surveillance cameras, and industrial IoT devices.
Datasheet EnGenius ENS500EXT
Datasheet, specifications of the EnGenius ENS500EXT - high-powered, long range Wireless N300 Outdoor AP
Datasheet EnGenius ENS202EXT
Datasheet, specifications of the EnGenius ENS202EXT - long range 2.4GHz Wireless N300 Outdoor Access Point
More Related Content
What's hot
Datasheet EnGenius ENH900EXT
The document describes the EnGenius ENH900EXT, a dual-band wireless access point with up to 450Mbps speeds on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE for power and data, and can operate in access point, client bridge, or WDS modes. It also offers features like remote management and firmware upgrading via a web interface.
Datasheet EnGenius ENH202
The ENH202 is a high-speed, long-range outdoor wireless access point or bridge that operates on the 2.4GHz band and supports IEEE 802.11b/g/n standards. It features an integrated 10dBi dual polarization antenna and can transmit wireless data at up to 300Mbps. The ENH202 has a high power output of up to 800mW, enabling connectivity over an extended range. It can function as an access point, client bridge, client router, or wireless distribution system bridge.
Datasheet ENS1200
The document provides information about the EnGenius ENS1200, a dual band wireless AC1200 outdoor access point. It has speeds up to 300Mbps on 2.4GHz and 866Mbps on 5GHz. Key features include dual concurrent radios, high transmit power, enhanced receive sensitivity, internal high gain antennas, various operation modes, and support for 802.11 standards. It is suitable for providing outdoor wireless access and connectivity for small to medium businesses.
Datasheet EnGenius EnStation2
The EnStation2 is an outdoor wireless device from EnGenius Europe that provides wireless connectivity of up to 300Mbps. It has a high gain directional antenna, supports four operation modes, and can be managed through EZ Controller software. The EnStation2 offers security features like WEP, WPA, WPA2 encryption as well as authentication protocols to enforce security.
Datasheet EnGenius EAP1750H
The EnGenius EAP1750H is a dual-band wireless access point that supports 802.11ac wireless speeds up to 1300Mbps on 5GHz and 450Mbps on 2.4GHz. It has 6 internal antennas and can be powered by Power over Ethernet or an included power adapter. The EAP1750H provides wireless coverage for traffic-intensive applications and includes features such as band steering and fast roaming.
Datasheet EnGenius EAP600
Datasheet, specifications of the EnGenius EAP600 - Wireless-11N 600Mbps high power dual band concurrent ceiling mount AP.
Datasheet EWS350AP
The document provides information on the EnGenius EWS350AP dual-band 802.11ac indoor access point. It can operate as a standalone access point or as part of a scalable wireless network management solution. Key features include speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz, high transmit power for expanded coverage, and support for up to 8 SSIDs and VLAN tagging per radio. It also supports centralized management and reporting via the optional ezMaster software.
Datasheet EnGenius ENH1750EXT
The document provides information on the ENH1750EXT outdoor wireless access point, including its key features, specifications, and compliance. The ENH1750EXT has dual-band 802.11ac and 802.11n wireless with speeds up to 1300Mbps, supports PoE, has two Gigabit Ethernet ports, and has an IP68-rated waterproof housing designed for harsh outdoor environments. It provides flexibility through its ability to configure each radio into different modes and supports various security and authentication standards to enforce security.
Datasheet EWS510AP
The EnGenius EWS510AP is a dual-band wireless access point and 4-port switch that is designed to be installed in wall plates for providing wireless and wired connectivity in hotel rooms, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and has internal antennas. It can operate as a standalone access point or be centrally managed as part of a larger wireless network. The device has one uplink port, three downstream ports, and a Power over Ethernet port to power devices like phones.
Datasheet ENS1750
The EnGenius ENS1750 is a dual-band wireless AC1750 outdoor access point that provides speeds up to 450Mbps on 2.4GHz and 1300Mbps on 5GHz. It functions as a standalone access point or as part of EnGenius' business-class networking products. Key features include dual concurrent radios, high transmit power, support for 802.11ac and 802.3at Power over Ethernet, and an IP55 weatherproof rating making it suitable for outdoor deployment.
Datasheet EnGenius ECB600
The document is a datasheet for the ECB600 wireless access point/client bridge from EnGenius Europe. It provides key details about the device such as its operating frequencies, data rates up to 600Mbps, support for 802.11a/b/g/n standards, inclusion of 4 external antennas, gigabit Ethernet port, ability to operate as an access point or repeater, security features, and environmental specifications. The ECB600 allows for simultaneous dual band wireless connectivity on both 2.4GHz and 5GHz frequencies with a range of up to 29dBm.
Datasheet EWS500AP
The EnGenius EWS500AP is a wall plate access point and switch that provides wireless connectivity, Power-over-Ethernet, and wired ports for in-room devices in hotels, dorms, and classrooms. It supports 802.11n wireless speeds up to 300Mbps and can operate as a standalone access point or be centrally managed. The compact design mounts onto a standard junction box and includes antennas, PoE ports, and additional ports to support IPTVs, phones, and other wired devices without extra equipment.
Datasheet EAP300-CP
The document provides information about the EAP300-CP device from EnGenius Europe. It is a captive portal ready device that offers instant wireless internet access for guests through various authentication methods like vouchers, social media, and email/SMS. It requires zero configuration and is plug-and-play. Additional devices can join its built-in wireless mesh network for extended coverage without needing an Ethernet connection. Key features include 32MB memory, 5dBi antenna, 10/100 Ethernet port, support for 802.11n and various security protocols.
Datasheet EnGenius EAP900H
The document is a datasheet that describes the features and specifications of the EAP900H dual-band wireless access point from EnGenius Europe. It details that the access point supports wireless speeds up to 450Mbps on both the 2.4GHz and 5GHz bands, has internal antennas in a ceiling mount housing, supports AP and WDS modes, 802.3at Power over Ethernet, and can be managed through a web interface or EZ Controller software. It also provides tables listing the radio specifications, physical characteristics, and wireless operating features of the EAP900H.
Datasheet EPE4818G
The EnGenius EPE-4818G is a PoE injector that provides power and network connectivity to PoE devices over Ethernet cables up to 300 feet long. It has one Gigabit Ethernet port to connect to a network switch and one PoE output port, and can supply up to 24W of power through the cable. This allows wireless access points and other PoE devices to be installed in places without access to power outlets.
Datasheet ECB1200
This document provides information on the EnGenius ECB1200 dual-band concurrent access point/client bridge, including its key features, specifications, operation modes, and security features. The ECB1200 supports data rates up to 867Mbps on the 5GHz band and 300Mbps on the 2.4GHz band. It has dual detachable antennas for each band and can operate in access point, client bridge, or WDS modes. Security features include WEP, WPA/WPA2, MAC address filtering, and HTTPS/SSH support.
Datasheet EnGenius EnStation5
The EnStation5 is an outdoor wireless device that provides wireless connectivity up to 300Mbps. It has a powerful 5GHz radio and a high-gain 19dBi directional antenna. It can operate in access point, client bridge, client router, and WDS modes. The EnStation5 integrates with EnGenius' management software and offers security, monitoring, and management features to ensure optimal user experience over long-range wireless connections.
Quick Installation Guide ESR300 English
This document provides a quick installation guide for an EnGenius ESR300 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It also lists the minimum requirements which are a broadband internet service, internet browser and wireless adapter. The guide then provides 7 steps for setup which include connecting the router to a modem with an ethernet cable, powering on the devices, locating the wireless network name and password, connecting devices to the network, and accessing the router configuration through a web browser.
Quick Installation Guide ESR350 English
This document provides a quick installation guide for an EnGenius ESR350 wireless router. It lists the package contents which include the router, guide, ethernet cable and power adapter. It then outlines the 7 step process to set up the router which involves connecting the ethernet cable from the router to the modem, powering on the devices, locating the wireless network name and password, and accessing the router configuration page.
Sales presentation EnStation2 - EnStation 5
The document provides information about EnStation2 and EnStation5 wireless outdoor CPE products, including key specifications, features, selling points, and target markets. The EnStation series features high gain directional antennas, high output power, long transmission ranges up to 10km, various operation modes, and management via EZ Controller software. They are suited for applications requiring long range point-to-point wireless links such as internet access, surveillance cameras, and industrial IoT devices.
What's hot (20)
Similar to Datasheet EnGenius ECB300
Datasheet EnGenius ENS500EXT
Datasheet, specifications of the EnGenius ENS500EXT - high-powered, long range Wireless N300 Outdoor AP
Datasheet EnGenius ENS202EXT
Datasheet, specifications of the EnGenius ENS202EXT - long range 2.4GHz Wireless N300 Outdoor Access Point
Datasheet EnGenius ENS202
The ENS202 is a high-power, long-range wireless access point with a built-in 8dBi dual-polarity directional antenna. It provides wireless speeds up to 300Mbps and a range of up to 400m. The device has advanced security features, multi-operation modes, and is designed for reliable outdoor use in harsh environments. It can be used to build scalable wireless networks for applications like surveillance and industrial IoT.
Datasheet EPA2406FP
The document describes the EnGenius EPA2406FP PoE adapter, which provides power and networking over a single Ethernet cable. It can power devices up to 100 meters away, reducing installation costs and time. Key features include compatibility with passive 24V devices, overcurrent protection, and the ability to power devices that require up to 24V/0.6A of power, such as wireless access points or IP cameras. Specifications include an input voltage of 100-240V AC, output of up to 14.4W, operating temperature range of 0-40°C, and dimensions of 100x58.4x33.4mm.
Datasheet ENH710EXT
The document provides information on the EnGenius ENH710EXT, a dual-band wireless access point with speeds up to 300Mbps on both the 2.4GHz and 5GHz bands. It has an IP68-rated waterproof enclosure, two Gigabit Ethernet ports that support PoE and remote reset functionality. It also supports AP, client bridge and WDS modes for flexible deployment and can be managed through a web interface or EnGenius Zone Controller software.
Datasheet EnGenius ENH700EXT
The document is a datasheet for the EnGenius ENH700EXT wireless outdoor access point. It provides high-level details about the access point's frequency bands, data rates, security features, operating modes, and environmental specifications. The ENH700EXT operates on both 2.4GHz and 5GHz bands, supports data rates up to 600Mbps, and has certified IP-68 protection for outdoor use. It offers various security protocols, up to 8 SSIDs per radio, and quality of service features.
Datasheet ENH220EXT
The document provides information on the EnGenius ENH220EXT outdoor wireless access point. It has the following key features:
- Provides wireless connectivity at speeds up to 300Mbps with 2.4GHz 802.11b/g/n support.
- Has an IP68-rated waterproof enclosure and flexible mounting options to operate in harsh outdoor environments.
- Includes two Gigabit Ethernet ports that support Power over Ethernet (PoE) for power and remote reset functionality.
- Can be configured through a web interface or EnGenius Zone Controller software for centralized management of multiple devices.
Datasheet EWS300AP
The document describes the EnGenius Neutron EWS300AP wireless access point. It is an affordable single-band 802.11n access point that can operate as a standalone device or as part of a scalable EnGenius Neutron wireless network management solution. It provides wireless speeds up to 300Mbps for large homes and small businesses. Key features include support for 802.11b/g/n, Power over Ethernet, two internal antennas, a Gigabit Ethernet port, and ceiling or wall mounting. It can be centrally managed by EnGenius' ezMaster software.
Datasheet EnGenius ESR900
The EnGenius ESR900 is a dual band wireless N900 router that provides wireless speeds up to 900Mbps and gigabit wired speeds. It has a USB port for sharing content and connecting storage devices. The router has extended wireless range for connectivity throughout the home and includes security features like encryption and firewalls. It allows for multiple wireless networks and customization of network access.
Datasheet EWS2910P-Kit-300
The document describes the EnGenius Neutron EWS2910P-Kit-300 WLAN starter kit which includes an EWS2910P WLAN controller PoE switch and two EWS300AP indoor managed access points. The kit is designed to create or expand a high-powered Wi-Fi network in large homes or small businesses. The EWS2910P can manage up to 20 access points and provides 8 PoE ports. The EWS300AP supports PoE and ceiling or wall mounting, and connects to the EWS2910P for management and configuration. Key features of the devices include wireless speeds up to 300Mbps, centralized management software, and support for multiple SSIDs and VLANs.
Datasheet EnGenius EWS5912FP
The document provides information on the EnGenius EWS5912FP wireless management switch. It can manage up to 50 wireless access points and provides 8 Gigabit PoE ports. It offers an intuitive GUI for easily monitoring and configuring a wireless network, including features like topology view, floor plan view, map view, and remote access point rebooting and firmware upgrades. The switch integrates seamlessly into existing networks and provides advanced wireless capabilities such as band steering, fast roaming, and mesh networking.
Datasheet EPA5006GAT
The EnGenius 802.3at/af Gigabit PoE adapter extends power and networking to devices up to 328 feet away over a single CAT5/6 cable. It delivers up to 30W of power for devices like access points, IP cameras, and VoIP phones. The compact adapter has surge protection and supports both 10/100/1000 Ethernet and Power over Ethernet for flexible deployment of network devices in locations without power outlets.
Datasheet EnStationAC
The EnStationAC is a high-powered outdoor wireless access point/client bridge that offers dual PoE Gigabit ports and high-gain directional antennas. It provides 11ac wireless speeds up to 867Mbps over long distances up to 8km point-to-point. It has an IP55-rated waterproof and dustproof casing and two PoE ports to connect and power additional network devices in remote locations. Key features include powerful 5GHz wireless, quality of service for prioritizing applications, and remote monitoring and configuration via EZ Controller software.
Datasheet EP902
The document describes the EnGenius EP902 cordless phone system. It is a 2-line digital system that operates in the 800MHz frequency band and allows for calls over a range of up to 6 floors in buildings. The system can expand to include up to 4 base units supporting 2 lines each, and 36 handsets total. Key features include independent 2-way calling, conference calling, and digital long range connectivity without push-to-talk or group chatting limitations. Technical specifications for the base station and portable handsets are also provided, including frequency, power output, antenna details, interfaces, coding, and regulatory compliance information.
EnGenius Europe Datasheet EPG5000
The document provides information about the EnGenius EPG5000 wireless gateway. It has the latest 802.11ac technology and can deliver wireless speeds up to 1.75Gbps. It supports the next generation IPv6 standard and includes security features like WPA/WPA2 encryption. The EPG5000 also functions as an Internet of Things gateway and works with EnGenius' cloud service to remotely monitor and configure connected devices over a home network through mobile apps.
Datasheet EnGenius EWS320AP
The document provides information on the EWS320AP wireless access point, including its key features, specifications, and management capabilities. The EWS320AP supports wireless transmission speeds up to 450Mbps on both 2.4GHz and 5GHz bands. It is designed to work with EnGenius wireless management switches for centralized management and advanced wireless functionality.
Similar to Datasheet EnGenius ECB300 (16)
More from EnGenius Europe
Product Catalogue 2015 EnGenius Europe
The document is a product catalogue from EnGenius that includes:
- An index listing various product series such as outdoor business solutions, indoor business solutions, PoE switches, and digital cordless phones.
- Information about EnGenius and their expertise in long range wireless solutions.
- Descriptions and specifications for several product series, including custom series for unique deployments, outdoor access points, indoor access points, and PoE switches.
- An example use case of EnGenius wireless products providing a reliable network for a music festival organization.
Datasheet EWS650AP
The EWS650AP is an outdoor dual-band 11ac wireless access point that provides speeds up to 867Mbps on 5GHz and 300Mbps on 2.4GHz. It has a high power transmitter and internal antennas for extended outdoor wireless coverage. The access point can operate as a standalone device or be centrally managed as part of a scalable wireless network solution using EnGenius management software and switches. It features an IP55-rated weatherproof enclosure to withstand harsh outdoor environments.
Datasheet EPA5006GP
The EnGenius passive 54V Gigabit PoE adapter extends power and networking to devices up to 328 feet away over a single cable. It provides up to 32.8 watts of power for devices like access points and IP cameras while also supporting high-speed Gigabit Ethernet connectivity. The compact adapter has surge protection to safeguard connected equipment from power issues and includes wall mounting hardware for flexible installation.
Quick Installation Guide EWS650AP English
This document provides installation instructions for the EnGenius EWS650AP managed indoor access point. It outlines how to connect the access point to a computer or EnGenius wireless management switch to configure its IP address and settings. Instructions are given for stand-alone installation without a management switch as well as mounting options including wall mounting and pole mounting.
Quick Installation Guide EWS350AP English
This document provides installation instructions for the EnGenius EWS350AP managed indoor access point. It describes how to connect the access point to a computer or EnGenius wireless management switch to configure it. It also explains how to mount the access point to a wall or ceiling using the included mounting bracket or T-rail connectors. Setup steps include configuring the computer's IP address, logging into the access point's web interface using the default credentials, and selecting the access point operation mode.
Quick Installation Guide EnStationAC English
This document provides instructions for installing and setting up the EnStationAC device. It includes a list of package contents and minimum requirements. It then provides step-by-step instructions for connecting the EnStationAC device, setting up the computer network configuration, accessing the EnStationAC's web interface, and selecting an operating mode. It also includes instructions for wall mounting or pole mounting the EnStationAC unit.
ezMaster User manual
This document provides an overview and instructions for installing and using ezMaster, a centralized network management system for EnGenius Neutron Series access points. It describes the ezMaster software, compatible access points, deployment scenarios, system requirements, and instructions for importing the ezMaster virtual machine image. It also outlines the main dashboard, device management features, monitoring, visualization, statistics, and maintenance capabilities available in ezMaster.
ezMaster Neutron solution Datasheet
The Neutron-series distributed network management solution from EnGenius offers complete scalability, unlimited flexibility, and lower costs compared to other solutions. It allows users to manage from 1 to 1,000+ access points and switches, with 10,000+ concurrent users across unlimited distributed networks. The solution includes Neutron managed access points, Neutron WLAN controller switches, and ezMaster centralized network management software. It provides simplified deployment and management, optimized wireless performance, and enterprise-class features at an affordable price point with no access point licensing fees.
Datasheet EWS2910P
The document provides information about the EnGenius Neutron EWS2910P WLAN controller switch, which is an 8-port Gigabit PoE Layer 2 switch with two dual-speed SFP fiber uplink ports. It can discover, configure, manage and monitor up to 20 EnGenius Neutron access points through its web-based interface. Key features include wireless management capabilities, Layer 2 features, and technical specifications such as 802.3af PoE support and an operating temperature range of 0 to 50°C.
Quick Installation Guide EWS300AP English
This document provides instructions for quickly installing an EnGenius EWS300AP managed indoor access point. It lists the package contents and minimum requirements. The steps explain how to connect the access point to a computer via an EnGenius wireless management switch in order to obtain an IP address for configuration. It also provides instructions for mounting the access point to a wall or ceiling using either a mounting bracket or T-rail connectors.
Quick Installation Guide EWS500AP English
This document provides instructions for quickly installing an EnGenius EWS500AP managed indoor access point. It outlines unpacking the contents, minimum system requirements, connecting the access point to a PoE switch via Ethernet cable, configuring the IP address and management switch, mounting the access point to a wall or outlet box, and connecting it using a 110 punch-down block as an alternative to the Ethernet port. The instructions are separated into clear steps to guide the user through the swift setup and deployment of the new access point.
Quick Installation Guide EWS510AP English
This document provides instructions for quickly installing an EnGenius EWS510AP managed indoor access point. It outlines unpacking the contents, minimum system requirements, connecting the access point to a PoE switch via Ethernet cable, configuring the IP address and management switch, mounting the access point to a wall or electrical box, and connecting it using a 110 punch-down block as an alternative to the Ethernet port. The instructions are separated into clear steps to guide the user through a simple installation process.
Quick Installation Guide EWS2910P English
The document is a quick installation guide for an EnGenius EWS2910P wireless management switch. It includes instructions on unpacking the package contents, installing the switch on a flat surface or wall, connecting the switch to a computer and access points, configuring the IP addresses, accessing the management interface, locating and managing connected access points, and managing the switch configuration. Setup and management can be done through a web browser-based graphical user interface.
More from EnGenius Europe (20)
Recently uploaded
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Generating privacy-protected synthetic data using Secludy and Milvus
During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Recently uploaded (20)
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Generating privacy-protected synthetic data using Secludy and Milvus
Generating privacy-protected synthetic data using Secludy and Milvus
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Datasheet EnGenius ECB300
- 1. EnGenius Europe | Veldzigt 28, 3454 PW De Meern, The Netherlands 0900-9434222 (0900-WIFIABC) | www.engenius-europe.com Disclaimer: Information may be subject to changes without prior notification https://www.linkedin.com/company/engeniuseurope https://plus.google.com/+EngeniusEuropeBVDeMeern https://www.youtube.com/user/engeniuseuropebv https://twitter.com/engeniuseu Datasheet ECB300 • Frequency band 2.4GHz • With 5 dBi detachables antenna’s • 1* shared 10/100 LAN/WAN Port • PoE 802.3af compliant • It is supported with 8 modes The ECB300 is a wireless-N multi-function access point, delivering data rates up to 300Mbps. It offers unlimited coverage strong penetration, secure network management and 802.3af PoE connection. The ECB300 is a 2.4GHz wireless-n indoor access point/client bridge/WDS/repeater that features high transmit power (up to 29dbm) for lang range Wi-Fi coverage, wireless speeds and a Fast Ethernet port for connecting to switch or router. The external 5dBi antenna provides extended and stable wireless connection. MSSID + VLAN makes the data more secure and easy to manage. Standard PoE interoperable with 802.3af makes Internet connection more flexible. The ECB300 provides 6 operation modes that allows users to set different mode in different environments. It is a multi-function model suitable for the usage of SOHO, small offices and restaurants. Key features
- 2. EnGenius Europe | Veldzigt 28, 3454 PW De Meern, The Netherlands 0900-9434222 (0900-WIFIABC) | www.engenius-europe.com Disclaimer: Information may be subject to changes without prior notification https://www.linkedin.com/company/engeniuseurope https://plus.google.com/+EngeniusEuropeBVDeMeern https://www.youtube.com/user/engeniuseuropebv https://twitter.com/engeniuseu Datasheet ECB300 Hardware Memory: 32MB Flash: 4MB Antenna 2* External 5dBi SMA antenna Physical interface LAN: 1* 10/100 Ethernet RJ-45 (802.3af PoE standard supported) Reset button Power jack Power requirement Adapter: 12V/1A RF specification Frequency band 2.4GHz Data rate Up to 300Mbps Software Operation modes Access point/Router/Client bridge/WDS AP/ WDS Bridge/Universal repeater Wireless/Network WDS AP/WDS Bridge Channel setting: Manual, Auto/Best channel selection Security WEP (64/128bit) WPA/WPA2 TKIP/AES MAC address filtering (WLAN, up to 32 fields) L2 Isolation client isolation 802.1x Authenticator MD5/TLS/TTLS, PEAP 802.1x Supplicant - Only CB/CR modes QoS (Quality of Service) WMM (Wireless Multimedia) Environment & mechanical Temperature range: 0 to 50°C - Operating -20 to 60° 0 - Storage Humidity (non-condensing) 90% or less - Operating 90% or less - Storage Package contents ECB300 Power adapter (12V/1A) CD with users manual QiG Ethernet cable 2* Detachable antenna