This document provides an overview and technical specifications for quick running actuators with various torque ratings from 2.5 Nm to 15 Nm. It includes general information about standard features for different actuator models, as well as technical data spread across multiple pages for each torque rating. Application areas mentioned include laboratory ventilation, room ventilation, and VAV systems.

1. ACTUATOR FOR DAMPERS
Quick running actuator
Actuator with rotation drive
2.5 Nm
4 Nm
5 Nm
8 Nm
15 Nm
For the application with
Laboratory ventilation techniques
Room ventilation techniques
VAV
Valves
Page: Content:
2 General overview quick running actuator, 2.5 Nm, 5 Nm, 8 Nm + 15 Nm
3 Actuator with digital drive
4 - 5 Technical Data, quick running actuator, 2.5 Nm
6 - 7 Technical Data, quick running actuator, 8 Nm
8 - 9 Technical Data, quick running actuator, 15 Nm
10 - 17 Technical Data, quick running actuator, 5 Nm
18 - 19 Technical Data, quick running actuator, 4 Nm
20 Specific characteristics of continuous control
21 Notes
22 Your way to Gruner
rnative
alte
GR
UNER – he frie n dly
t
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

2. 2 GENERAL OVERVIEW: QUICK RUNNING ACTUATORS
● = Standard
02
08
15
❍ = Optional
4-
4-
4-
02
02
02
S-
S-
S-
7C
7C
7C
Type
22
22
22
Torque 2.5 Nm 8 Nm 15 Nm
Running time (90°) 1s 4s 5s
Control Tri-state
On/Off ● ● ●
Continuous control
(0) 2...10 VDC or ● ● ●
(0) 4...20 mA
Power supply
24 VAC/DC ● ● ●
230 VAC
Options
Digital Drive ❍ ❍ ❍
Feedback signal ● ● ●
GUAC Connection ❍ ❍ ❍
Page 4 6 8
P5
S1
● = Standard
P5
P5
S1
S1
5-
5-
5
05
04
5-
5-
5-
5-
-0
-0
-0
5
5
❍ = Optional
4-
4-
-0
-0
-0
-0
-0
-0
30
30
30
02
02
24
24
24
30
30
30
-2
-2
-2
S-
S-
-0
-0
-0
-2
-2
-2
-3
-3
-3
7C
7C
7S
7S
7S
7S
7S
7S
7S
7S
7S
Type
22
22
22
22
22
22
22
22
22
22
22
Torque 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 5 Nm 4 Nm
Running time (90°) 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 20...35s 5s
Control Tri-state ● ● ●
On/Off ● ● ● ● ● ● ● ● ●
Continuous control
(0) 2...10 VDC or ● ●
Ω
(0) 4...20 mA w/ 500Ω
Power supply
24 VAC/DC ● ● ● ● ●
230 VAC ● ● ● ● ● ●
Options
Digital Drive
Potentiometer ● ● ●
Feedback signal ● ●
Auxiliary switch ● ● ●
GUAC Connection ❍
Page 10 10 10 12 12 12 14 14 14 16 18
Standard version with universal locking clamp and anti torsion bow. Also available with concentric form locking for shaft (❑ 8 mm) and flange fixing. All actua-
tors dispose of manual override button, a mechanical limitation of the angle of rotation and setting button for the rotation direction (cw/ccw).
Actuators according to US-standards available upon demand.
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

3. ACTUATOR WITH DIGITAL DRIVE 3
The actuators with digital drive have no dip switches for setting the functions. All settings are done by
the GUIV (Windows PC or Handheld device) via PP-Bus:
Connection scheme
Available options: • direction of rotation
• increasing of running time up to 20 s
• control signal Y = (0) 2...10 VDC
• control signal Y = (0) 4...20 mA @ 500Ω
• feedback signal U = (0) 2...10 VDC
• limitation of angle of rotation 0...100% of 95°
- αMin correspond (0) 2 VDC BUBN BK GY
- αMax correspond 10 VDC
• digital control via αConst as variable for angular control
Y U/PP
Angular control Windows software
100%
0% Y
/VDC
U
2 10
GUIV Connection
PP-Bus LED's
FUNCTION LED 1 2 3
Y U/
PP DATA RD U/
PP
CONNECT YE
POWER GN GUIV-S
BU BN BK GY
AC 24V
DC 24V
- +
1 2 3 5 5
U/ 3 3
PP
2 2
GUIV-S PC
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

4. 4 227CS-024-02
Applications
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • load independent
• torque 2.5 Nm • speed regulated
• running time 1 s • direction of rotation changeable from inside
• position indication • electromagnetic compatibility controlled
• angle of rotation changeable from outside • maintenance-free
Technical data
Control Continuous control / On/Off
Control signal Y (Continuous control) 0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
Control signal Y (On/Off) 0 VDC (Off)
24 VAC / DC (On)
Feedback signal U 0...10 VDC or
2...10 VDC (Standard)
Connecting voltage 24 VAC (50/60 Hz) / DC±20%
Power consumption 18.0 W
Transformer sizing 22.0 VA
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from inside
Running time (90°) 1s
Torque 2.5 Nm
Connection cable 900 mm / 0.75 mm2
Safety class III
Protection IP 54 (cable downwards)
Dimensions 115 x 65 x 89 mm
227CS-024-02 Ambient temperature -20...+50°C
Maintenance maintenance-free
Connnection scheme CE 73/23/EWG, 89/336/EWG
(continuous control) Weight 750 g
BUBN BK GY
Y U
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

5. 227CS-024-02 5
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
1 0 end stop, adjust the end stops as requested, and fasten the screws again.
Ø1
6
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustment of the functional switches (fig. 2)
OFF ON
Direction of rotation
clockwise (0...90°) 3 -
counter clockwise (90...0°) - 3
ON Control signal Y
OFF
2...10 VDC (Standard) 1, 2 -
1 2 3 4
0...10 VDC 2 1
4...20 mA 1 2
0...20 mA - 1, 2
Switches actually unused must be at position OFF. All switches are set to OFF by
factory default.
Technical drawing
227CS-024-02
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

6. 6 227CS-024-08
Application
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • load independent
• torque 8 Nm
4 • speed regulated
• running time 4 s • direction of rotation changeable from inside
• position indication • electromagnetic compatibility controlled
• angle of rotation changeable from outside • maintenance-free
Technical data
Control Continuous control / On/Off
Control signal Y (Continuous control) 0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
Control signal Y (On/Off) 0 VDC (Off)
24 VAC / DC (On)
Feedback signal U 0...10 VDC or
2...10 VDC (Standard)
Connecting voltage 24 VAC (50/60 Hz) / DC±20%
Power consumption 12.0 W
Transformer sizing 15.0 VA
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from inside
Running time (90°) 4s
Torque 8 Nm
Connection cable 900 mm / 0.75 mm2
Safety class III
Protection IP 54 (cable downwards)
Dimensions 115 x 65 x 89 mm
227CS-024-08 Ambient temperature -20...+50°C
Maintenance maintenance-free
Connnection scheme CE 73/23/EWG, 89/336/EWG
(continuous control) Weight 750 g
BUBN BK GY
Y U
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

7. 227CS-024-08 7
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
1 0 end stop, adjust the end stops as requested, and fasten the screws again.
Ø1
6
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustment of the functional switches (fig. 2)
OFF ON
Direction of rotation
clockwise (0...90°) 3 -
counter clockwise (90...0°) - 3
ON Control signal Y
OFF
2...10 VDC (Standard) 1, 2 -
1 2 3 4
0...10 VDC 2 1
4...20 mA 1 2
0...20 mA - 1, 2
Switches actually unused must be at position OFF. All switches are set to OFF by
factory default.
Technical drawing
227CS-024-08
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

8. 8 227CS-024-15
Application
To regulate dampers, valves or other regulatory
functions:
• Lifetime under full load • load independent
– 8 Nm more than 60,000 cycles • speed regulated
– 15 Nm at least 20,000 cycles • direction of rotation changeable from inside
• running time 5 s • electromagnetic compatibility controlled
• angle of rotation changeable from outside • maintenance-free
Technical data
Control Conntinuous control / On/Off
Control signal Y (Continuous control) 0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
Control signal Y (On/Off) 0 VDC (Off)
24 VAC / DC (On)
Feedback signal U 0...10 VDC or
2...10 VDC (Standard)
Connecting voltage 24 VAC (50/60 Hz) / DC±20%
Power consumption 20.0 W
Transformer sizing 26.0 VA
Max. allowable running time per 100 s 50% ED
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from inside
Running time (90°) 5s
Torque 15 Nm
Connection cable 900 mm / 0.75 mm2
Safety class III
Protection IP 54 (cable downwards)
227CS-024-15 Dimensions 115 x 65 x 89 mm
Ambient temperature -20...+50°C
Connnection scheme Maintenance maintenance-free
(continuous control) CE 73/23/EWG, 89/336/EWG
Weight 750 g
BUBN BK GY
Y U
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

9. 227CS-024-15 9
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
1 0 end stop, adjust the end stops as requested, and fasten the screws again.
Ø1
6
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustment of the functional switches (fig. 2)
OFF ON
Direction of rotation
clockwise (0...90°) 3 -
counter clockwise (90...0°) - 3
ON Control signal Y
OFF
2...10 VDC (Standard) 1, 2 -
1 2 3 4
0...10 VDC 2 1
4...20 mA 1 2
0...20 mA - 1, 2
Switches actually unused must be at position OFF. All switches are set to OFF by
factory default.
Technical drawing
227CS-024-15
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

10. 10 227S-024-05, 227S-024-05-S1, 227S-024-05-P5
Application
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • direction of rotation changeable from outside
• torque 5 Nm • Auxiliary switch adjustable from outside
• load dependent running time • electromagnetic compatibility controlled
• position indication • maintenance-free
• angle of rotation changeable from outside
Technical data
Control On/Off + Tristate
Connecting voltage 24 VAC (50/60 HZ) / DC ±20%
Power consumption 3.5 W
Transformer sizing 6.5 VA
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from outside
Running time (90°) 20...35 s
Torque 5 Nm
max. 1 auxiliary switch changeable from outside
Schaltleistung Zusatzschalter 250 VAC / 5 A, change-over switch
Rückführpoti 4.7 kΩ
Connection cable 900 mm / 0.75 mm2
Safety class III
Protection IP 54 (cable downwards)
Dimensions 115 x 65 x 61 mm
Ambient temperature -20...+50°C
Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Weight 530 g
227S-024-05 227S-024-05-S1 227S-024-05-P5
Connection scheme Connection scheme Connection scheme
BU BNBK BU BNBK BU BNBK BU BNBK
On/Off
2 1 3
BU BNBK BU BNBK S1
Tristate Potentiometer
2 1 3 Auxiliary switch
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

11. 227S-024-05, 227S-024-05-S1, 227S-024-05-P5 11
1 Adjustment of the angle of rotation (fig. 1)
5
M
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
1 0 Fixing of the shaft (fig. 1)
Ø1
6
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustment of the direction of rotation (fig. 2)
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
227S-024-05-S1
0 ,2 24VAC/ DC 50/60Hz
3,5 W
,4 5 Nm
,6 20...35 s Adjustment of the auxiliary switch (fig. 2)
IP 54
1 ,8
S2 S3 S2 S3
The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°.
S1 S1 1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
250 VAC
5 (2,5) A the knob to the right, i.e. “.2“ = 20%.
S1 S2 S3 BU BN BK 2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning
the knob to the left, i.e. “.8“ = 20%.
Technical drawing
227S-024-05
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

12. 12 227S-230-05, 227S-230-05-S1, 227S-230-05-P5
Application
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • direction of rotation changeable from outside
• torque 5 Nm • Auxiliary switch adjustable from outside
• load dependent running time • electromagnetic compatibility controlled
• position indication • maintenance-free
• angle of rotation changeable from outside
Technical data
Control On/Off
Connecting voltage 230 VAC (50/60 HZ) ±15%
Power consumption 2.2 W
Transformer sizing 28.0 VA
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from outside
Running time (90°) 20...35 s
Torque 5 Nm
max. 1 auxiliary switch changeable from outside
Schaltleistung Zusatzschalter 250 VAC / 5 A, change-over switch
Rückführpoti 4.7 kΩ
Connection cable 900 mm / 0.75 mm2
Safety class II
Protection IP 54 (cable downwards)
Dimensions 115 x 65 x 61 mm
Ambient temperature -20...+50°C
Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Weight 530 g
227S-230-05 227S-230-05-S1 227S-230-05-P5
Connection scheme Connection scheme Connection scheme
(On/Off) (On/Off) (On/Off)
S1
Auxiliary
2 1 3 switch
BU BNBK BU BNBK 2 1 3 BU BNBK
Potentiometer
N N N
L L L
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

13. 227S-230-05, 227S-230-05-S1, 227S-230-05-P5 13
1 Adjustment of the angle of rotation (fig. 1)
5
M
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
1 0 Fixing of the shaft (fig. 1)
Ø1
6
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustment of the direction of rotation (fig. 2)
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
227S-024-05-S1
0 ,2 24VAC/ DC 50/60Hz
3,5 W
,4 5 Nm
,6 20...35 s Adjustment of the auxiliary switch (fig. 2)
IP 54
1 ,8
S2 S3 S2 S3
The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°.
S1 S1 1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
250 VAC
5 (2,5) A the knob to the right, i.e. “.2“ = 20%.
S1 S2 S3 BU BN BK 2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning
the knob to the left, i.e. “.8“ = 20%.
Technical drawing
227S-230-05
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

14. 14 227S-3-230-05, 227S-3-230-05-S1, 227S-3-230-05-P5
Application
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • direction of rotation changeable from outside
• torque 5 Nm • Auxiliary switch adjustable from outside
• load dependent running time • electromagnetic compatibility controlled
• position indication • maintenance-free
• angle of rotation changeable from outside
Technische Daten
Control Tristate
Connecting voltage 230 VAC (50/60 HZ) ±15%
Power consumption 2.2 W
Transformer sizing 28.0 VA
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from outside
Running time (90°) 20...35 s
Torque 5 Nm
max. 1 auxiliary switch changeable from outside
Schaltleistung Zusatzschalter 250 VAC / 5 A, change-over switch
Rückführpoti 4.7 kΩ
Connection cable 900 mm / 0.75 mm2
Safety class II
Protection IP 54 (cable downwards)
Dimensions 115 x 65 x 61 mm
Ambient temperature -20...+50°C
Maintenance wartungsfrei
CE 73/23/EWG, 89/336/EWG
Weight 530 g
227S-3-230-05 227S-3-230-05-S1 227S-3-230-05-P5
Connection scheme Connection scheme Connection scheme
(Tri-state) (Tri-state) (Tri-state)
S1
BU BNBK BU BNBK 2 1 3 BU BNBK 2 1 3
Potentiometer Auxiliary switch
N N N
L L L
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

15. 227S-3-230-05,227S-3-230-05-S1,227S-3-320-05-P5 15
1 Adjustment of the angle of rotation (fig. 1)
5
M
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
1 0 Fixing of the shaft (fig. 1)
Ø1
6
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustment of the direction of rotation (fig. 2)
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
227S-024-05-S1
0 ,2 24VAC/ DC 50/60Hz
3,5 W
,4 5 Nm
,6 20...35 s Adjustment of the auxiliary switch (fig. 2)
IP 54
1 ,8
S2 S3 S2 S3
The scale at the adjusting know corresponds to a percentage graduation, related to 0° - 90°.
S1 S1 1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
250 VAC
5 (2,5) A the knob to the right, i.e. “.2“ = 20%.
S1 S2 S3 BU BN BK 2) End stop is set to “1“: Switch off the motor rand choose the requested switching position by turning
the knob to the left, i.e. “.8“ = 20%.
Technical drawing
227S-3-230-05
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

16. 16 227CS-024-05
Application
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • angle of rotation changeable from outside
• torque 5 Nm • direction of rotation changeable from outside
• load dependent running time • electromagnetic compatibility controlled
• position indication • maintenance-free
Technical data
Control Continuous control
Control signal Y 0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
Feedback signal U 0...10 VDC or
2...10 VDC (Standard)
Connecting voltage 24 VAC (50/60 Hz) / DC ±20%
Power consumption 3.5 W
Transformer sizing 5.5 VA
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from outside
Running time (90°) 20...35 s
Torque 5 Nm
Connection cable 900 mm / 0.75 mm2
Safety class III
Protection IP 54 (cable downwards)
Dimensions 115 x 65 x 61 mm
Ambient temperature -20...+50°C
Maintenance maintenance-free
227CS-024-05 CE 73/23/EWG, 89/336/EWG
Weight 530 g
Connection scheme
(Continuous control)
BUBN BK GY
Y U
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

17. 227CS-024-05 17
1 Adjustment of the angle of rotation (fig. 1)
5
M
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
1 0 Fixing of the shaft (fig. 1)
Ø1
6
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustments (fig. 2)
Angle of rotation:
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
227CS-024-05 tion, turn the adjusting knob to “L”.
24VAC/DC 50/60Hz
3,5 W Regulation range:
5 Nm
20...35 s The actuators are supplied with the (0) 2...10 VDC for the regulation range 0° to 90°. A smaller angle
IP 54
20% 100% Y=2...10VDC (proportional) can be chosen, where the regulation range (0) 2...10 VDC goes for. The actuator must be
U=2...10VDC
switched off for doing so.
BU BN BK GY
Y U
Technical drawing
227CS-024-05
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

18. 18 227CS-024-04
Application
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • angle of rotation changeable from outside
• torque 4 Nm • direction of rotation changeable from outside
• load dependent running time • electromagnetic compatibility controlled
• position indication • maintenance-free
Technical data
Control Continuous control
Control signal Y 0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
Feedback signal U 0...10 VDC or
2...10 VDC (Standard)
Connecting voltage 24 VAC (50/60 Hz) / DC ±20%
Power consumption 12.0 W
Transformer sizing 15.0 VA
Angle of rotation max. 95° (adjustable from outside)
Direction of rotation changeable from outside
Running time (90°) 5s
Torque 4 Nm
Connection cable 900 mm / 0.75 mm2
Safety class III
Protection IP 54 (cable downwards)
Dimensions 115 x 65 x 61 mm
Ambient temperature -20...+50°C
Maintenance maintenance-free
227CS-024-04 CE 73/23/EWG, 89/336/EWG
Weight 530 g
Connection scheme
(Continuous control)
BUBN BK GY
Y U
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

19. 227CS-024-04 19
1 Adjustment of the angle of rotation (fig. 1)
5
M
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
1 0 Fixing of the shaft (fig. 1)
Ø1
6
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
2 Adjustment of the direction of rotation (fig. 2)
The actuator is adjusted to clockwise direction by the factory => “R“. For changing the direction of rota-
tion, turn the adjusting knob to “L”.
227CS-024-04
24VAC/DC 50/60Hz
12 W
4 Nm
5s
IP 54
Y=2...10VDC
U=2...10VDC
BU BN BK GY
Y U
Technical drawing
227CS-024-04
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

20. 20 SPECIFIC CHARACTERISTICS OF CONTINUOUS CONTROL
Wiring configuration and recommended cable length
- + Y U 227CS - + Y U 227CS
BU BN BK GY BU BN BK GY
L2
L1 (I +I ) R >
A G L
24VAC
max. cable length
max. cable length
transformer
I R <
G L
L2
L1
24VAC
transformer
- + - + - + - +
Y U Y U
DC 0(2)...10V DC 0(2)...10V DC 0(2)...10V DC 0(2)...10V
by the controller by the actuator by the controller by the actuator
current of set valve selector
actuator current
cable cross section max. cable length
cable resistance
0,75 mm2 23 m
1 mm2 31 m
cable length 1,5 mm2 46 m
2,5 mm2 76 m
cable cross section For several actuators switched in parallel the
max. cable length must be divided by the num-
ber of actuators.
Teach-in of range of angle > 30°
1. Actuator stand by
2. Adjusting mechanical endstops
3. 15 VDC at Y
4. Power on actuator
5. Actuator starts teach-in process of range of angle (10...30 s)
BUBN BK GY 6. Remove 15 VDC at Y
15 VDC
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www..gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

21. NOTES 21
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www..gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved

22. YOUR WAY TO GRUNER
Stuttgart A8 München
Balingen
Karlsruhe Schömberg
Wehingen
A81
Freudenstadt B27
Gosheim
Denkingen Tuttlingen
Frittlingen
Strasbourg
Rottweil Spaichingen
B14 Aldingen
Schramberg
Offenburg 34
B27
A5 B33
Freiburg
Donaueschingen
B31 Singen
Zürich
Basel
N1
N3
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www..gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
41/05 · 227S_EN · Copyright by Gruner AG · Technical changes are reserved