More Related Content
Viewers also liked
Similar to D4 e1 intellikeys2011_lennertmaerschalck_celestindesmadryl
Similar to D4 e1 intellikeys2011_lennertmaerschalck_celestindesmadryl (20)
Recently uploaded
Recently uploaded (20)
D4 e1 intellikeys2011_lennertmaerschalck_celestindesmadryl
- 2. INTELLIKEYS 2.6 costs about 100 euro 9h 30 min http://intellikeys2011.blogspot.com/ Lennert Maerschalck/ Célestin Desmadryl http://designforeveryone.howest.be/
- 3. ASSEMBLY MANUAL http://designforeveryone.howest.be/
- 4. INTELLIKEYS 2.6 BILL OF MATERIAL - 1800 mm L-profile 20mm - 600 cm² 2mm plate - 400 mm square tube 20mm - 150 mm square tube 25mm - telescopic grip - 350 mm x 600 mm x 4 mm transparant plexi - 3 m 3M Dual Lock - 6 M4x40 screws + bolts - primer paint - finishing paint Eight different tools are needed Nine parts are standard and bought. Six parts have been made tailored
- 5. 1 INTELLIKEYS 2.6 DESCRIPTION Weld the support frame. Use our technical drawning as starter but mind your own needs. What angle do you want/need? Do you need an external typing divice? … Saw the different profiles to length, weld it all together and grind the welds smooth See technical plan 2 hours Weldingmachine, Metalsaw, Grinding machine L profiles, square profile and metal plate 1st part is made € 10
- 6. 2 INTELLIKEYS 2.6 DESCRIPTION Tape allsections you don’t want to paint. First spray a primer and after letting it dry long enough spray the frame with one or two layers of the disired colour. No technical plan 6h Papertape, Primer, paint 3 layers of paint were added €20 .
- 7. 3 INTELLIKEYS 2.6 DESCRIPTION Instal the telescopic grip on the welded frame with the screws. Make sure the screws have champered heads so they dont block the telescopic parts. When you don’t need an external keyboard you probably won’t need this telescopic grip, because the grip is used in combination with the keyboardmount. It makes it possible to open and close the laptop without dismounting the laptop. When this is the case, simply mount your laptop on the frame (see last step) No technical plan 10 min Screwdriver , wrenches 4 x M4x40 fastners 5 added parts € 0.50
- 8. 4 INTELLIKEYS 2.6 DESCRIPTION Laser the plexicover adjusted to your own needs. Ask HOWEST to do it for you or go to coorporation who’s able to do this for you. Adjust the drawning to your own needs See technical plan 10 min CNC lasertool 350 x 600 x 4 mm PMMA/plexi 1 part added € 60
- 9. 5 INTELLIKEYS 2.6 DESCRIPTION Bend the plexicover Use a hot air blower or a line bending machine. See technical plan 30 min Hot air blower No parts were bought No parts were added €0
- 10. 6 INTELLIKEYS 2.6 DESCRIPTION frame with the velcro Tape al the part to the No technical drawning 20 min No tools were use M3 DualLock velcro tape 1 part added € 10
- 11. 7 INTELLIKEYS 2.6 DESCRIPTION the parts Mount the plexi over No technical drawning 5 min Screwdriver 2 M4x40 screws 2 parts added € 0.25
- 12. 8 INTELLIKEYS 2.6 DESCRIPTION Attach the holder to the wheelchair. The holder is a bigger square pipe in which the frame is shoven. Mount this holder according to the best fitting possibility. Welding, screwing, … We could not complete this step yet because our patient, Karel, was going to change wheelchair again soon after our deadline. No technical drawning 15 min Weldingmachine Square profile 1 part added €2
- 13. TECHNICAL ADDENDUM http://designforeveryone.howest.be/
- 18. TEAM CONTACTS http://designforeveryone.howest.be/
- 20. SUPER_LENNERTJE@HOTMAIL.COM TEL +32 0476 68 40 76 CELESTIN. DESMADRYL@GMAIL.COM TEL +32 0494 03 15 98 JASMIEN_STEVENS @HOTMAIL.COM TEL +32 478 93 56 10 NATHATJE_004 @HOTMAIL.COM TEL +32 0496 86 77 56 HILDE.LOX@HOTMAIL.COM TEL +32 478 90 00 80 http://designforeveryone.howest.be/