Mr. Babli Naik is seeking a challenging position that provides opportunities for growth and learning new technologies. He has a B.E. in Electrical and Electronics Engineering and over 3 years of experience in electrical design, execution, and vendor management. His professional experience includes working as a Design Engineer for a switchgear company in Dubai where he designed low voltage panels. He also has experience working as a Project Engineer for an engineering services company in Mumbai where he designed electrical control panels.
Result oriented multitasking Engineering professional with 13+ years of work experience into multiple domains of Electrical Engineering, worked with world’s top most MNC giants into Power business like M/s Emerson Network Power & M/s Tyco Electronics and acquired excellent technical, administration & business skills.
Excellent hands on experience of Emerson Make UPS and battery banks, its various configurations based on application criticality i.e. 1+1 PR, Hot Standby Mode and Criss Cross Mode. Acquired Mastery in Battery Bank sizing, system load calculation, correct ups selection based on Engineering demand and financial limitations, pre site analysis and post-sales support, Power quality and safety Audits, customer training programs etc.
Acquired Excellent command into Planning, designing, development and management of Various critical Technical Facilities comprising of Large Electrical Sub Stations, HT and LT Switchgears & Power distribution Networks, IEEE recommended state of the art system earthing concept, Large Backup Power Machines i.e. DCPP (Diesel Captive Power Plant) & UPS and Batteries, Various Cooling means i.e. Chillers, Packaged units, Precision and VRF units, fire monitoring and safety systems, electronic surveillance systems & System Automation etc. for large corporations PAN India.
Efficiently performed variety of engineering projects for Telecom and Media groups these include set up of 1000 telecom towers, BSC & MSC in Bihar & Jharkhand Circle for M/s Tata Tele Services, More than 10nos. state of the art tier 4 redundant Data center and various News & TV studios, PCR and MCR countrywide for M/s NDTV LTD.
Result oriented multitasking Engineering professional with 13+ years of work experience into multiple domains of Electrical Engineering, worked with world’s top most MNC giants into Power business like M/s Emerson Network Power & M/s Tyco Electronics and acquired excellent technical, administration & business skills.
Excellent hands on experience of Emerson Make UPS and battery banks, its various configurations based on application criticality i.e. 1+1 PR, Hot Standby Mode and Criss Cross Mode. Acquired Mastery in Battery Bank sizing, system load calculation, correct ups selection based on Engineering demand and financial limitations, pre site analysis and post-sales support, Power quality and safety Audits, customer training programs etc.
Acquired Excellent command into Planning, designing, development and management of Various critical Technical Facilities comprising of Large Electrical Sub Stations, HT and LT Switchgears & Power distribution Networks, IEEE recommended state of the art system earthing concept, Large Backup Power Machines i.e. DCPP (Diesel Captive Power Plant) & UPS and Batteries, Various Cooling means i.e. Chillers, Packaged units, Precision and VRF units, fire monitoring and safety systems, electronic surveillance systems & System Automation etc. for large corporations PAN India.
Efficiently performed variety of engineering projects for Telecom and Media groups these include set up of 1000 telecom towers, BSC & MSC in Bihar & Jharkhand Circle for M/s Tata Tele Services, More than 10nos. state of the art tier 4 redundant Data center and various News & TV studios, PCR and MCR countrywide for M/s NDTV LTD.
I am B.sc Electrical and Electronic Engineer.
I speak Arabic ,English and Chinese.
I now live in Abu Dhabi, UAE .
Please find the attached CV.
I am a B.Sc Electrical Engineer by profession, having 2-years of experience in Ipro health constancy.
Worked as MEP.
-Project Management
-Load calculation
-Electrical interior design using auto cad.
I am B.sc Electrical and Electronic Engineer.
I speak Arabic ,English and Chinese.
I now live in Abu Dhabi, UAE .
Please find the attached CV.
I am a B.Sc Electrical Engineer by profession, having 2-years of experience in Ipro health constancy.
Worked as MEP.
-Project Management
-Load calculation
-Electrical interior design using auto cad.
I am B.sc Electrical and Electronic Engineer.
I speak Arabic ,English and Chinese.
I now live in Abu Dhabi, UAE .
Please find the attached CV.
I am a B.Sc Electrical Engineer by profession, having 2-years of experience in Ipro health constancy.
Worked as MEP.
-Project Management
-Load calculation
-Electrical interior design using auto cad.
1. CURRICULAM VITAE
Mr. BABLI NAIK
B.E. Electrical & Electronics
Contact: +971562321887/+971558382328 (Mob)
Email: babli.naik@gmail.com;
Seeking a challenging position in a dynamic organization which provides opportunities for
growth, learning new & emerging technologies, utilizes & enhances my skill to meet the
organizational goals.
B.E. Electrical & Electronics Engineer with mainstream experience in Low Voltage
Switchgear & Building Management System (BMS) for industrial, commercial &
residential applications.
Result oriented, proactive and hard working professional with 3-4 years of
experience in electrical design, execution, techno-commercial support & Vendor
development and management.
Team player with excellent communication, co-ordination, supervision &
management skills.
Excellent client management skills and ability to build strong, lasting and mutually
beneficial relationships.
Competencies include multi-tasking, performing under pressure and meeting
deadlines, with excellent Communication (verbal and written) and Presentation
skills.
PROFESSIONAL EXPERIENCE
DANADANA ELECTRICELECTRIC ENERGYENERGY LLCLLC. (. (DUBAIDUBAI,, UAEUAE))
((CC//OO)) DHAFIRDHAFIR SWITCHGEARSWITCHGEAR LLCLLC. (. (ABUABU DHABIDHABI,, UAEUAE))
From: Nov 2012 to Present
An electrical company specialized in design and manufacture of high quality switchgear &
control panels. Having its own panel-manufacturing unit engaged in Design,
Manufacture,Testing & Commissioning of electrical control panels which includes Main
Distribution Boards(MDB) /LV Panels, Sub Main Distribution Boards, Final Distribution
Boards, Motor Control Center, Generator Synchronizing Panel, ATS Panels, AMF Panels,
PLC Panels, Variable Speed Drives, Soft starter Panels, Metering Cabinets & Consumable
Units.
For more info http://www.dhafirswitchgear.com/
Department: Design
1 of 6
OBJECTIVE
PROFILE & STRENGTHS
2. Designation: Design Engineer (Design & Execution)
JOB RESPONSIBILITIES :
a) LV Switchgear :-
• Study of tender specifications, Single line diagram, load schedules &other tender
documents for preparation of schematic drawings for manufacturing.
• Discuss with client to understand the exact requirement of the project and clear all
the doubts related to the project.
• Designing of panels as per International standards such as IEC, BS, EN & Local
Regulations such as ADDC, DEWA, SEWA, FEWA & KAHRAMA
(QATAR).
• Design includes Main Distribution Board (MDB), Sub Main Distribution
Boards (SMDB), Motor Control Centres (MCC- DOL, Star-delta, VFD &
Soft starter), Automatic Transfer Switches (with ACBs & MCCBs) and
Capacitor Bank in various forms of separation such as Form 2 & Form 4 type 6
& 7 / front & rear access.
• Preparation of compliance statement as per the project specifications.
• Preparation of technical submittal within the specified time.
• Coordinate with Schneider Electric & department members for better & improved
design.
• Approval of technical submittal from the consultant/client prior to manufacturing.
• Release of approved drawings for procurement & production.
• Resolve technical issues that arise during the production process.
• Arrange for Factory Acceptance Test (FAT) once the panels are ready for
dispatch.
• Follow up for delivery of the panels.
• Preparation of final As-built drawings.
• Perform and supervise all design functions related to electrical aspects of the
project.
• Preparation of Operation & Maintenance manual.
• Perform Short-circuit calculations in ETAP/ECODIAL software, Bus bar
sizing calculations, Panel Weight Calculation, Temperature Rise Calculation,
etc. based on the client requirement.
• Coordinate with commissioning engineer for the successful completion of the
project.
b) Building Mangement System (BMS) :- (Design & Execution)
• Study of tender drawings, specifications, design drawings, electrical drawings
such as lighting, access control, CCTV, power, small power, fire alarm, LV
room, UPS room, generator room layouts, central battery system, BTU
meters and mchanical drawings such as HVAC, drainage, water supply, CO
sensors, boiler room & pump room layouts.
2 of 6
3. • Preparation of Data point schedule/IO point schedule based on the the project
requirement.
• Design & preparation of BMS conduit/containment layout as per the project
requirement which includes hard wired integration & software integration
through different network protocols like BACnet, M-bus, ModBus, EIB, LON as
per the project requirement.
• Coordinate with other system/suppliers for preparing the layout drawings.
• Preparation of Schematic diagrams, Sequence of operations, Bill of material,
Network layouts & DDC general arrangement & wiring diagrams as per the
project requirements.
• Preparation of technical submittals for consultant approval.
• Attend the meetings with the consultant/client to get the approvals.
• Procurement of materials as per the project requirements and arrange for the
delivery of the materials.
• Prepare invoices and follow up for the payment from clients, attend the weekly
meetings for technical & financial issues.
• Coordinate and assist the site Engineers, supervisors & technicians in installation
oriented projects.
• Preparation of As built drawings.
• Provide demonstration, training and handing over the system to client.
• Coordinate with maintenance team after the handing over of the project.
LARSEN & TOUBRO LTD. (MUMBAI)LARSEN & TOUBRO LTD. (MUMBAI)
From: May 2012 to Nov 2012
L&T Integrated Engineering Services (IES) is a Strategic Business Unit of Larsen & Toubro, a
USD 12.8 Billion Indian Engineering Conglomerate.
L&T IES is acknowledge as one of the fastest engineering service provider and has a global
footprint with offices in US, UK, Germany, Japan, France, Denmark, Sweeden, Canada and
India. IES is supported by a strong team of experienced engineers and deliver high-quality
engineering and design solution. The service includes product design, analysis, prototyping &
testing, embedded system design, manufacturing engineering, plant & construction engineering,
asset information management and engineering process support using cutting-edge
CAD/CAM/CAE technology in various domains. http://www.lnties.com/
Department: Bidmanager
Designation: Project Engineer
JOB RESPONSIBILITIES :
SWITCHGEAR DESIGN AND ESTIMATION
Study of tender specifications, Single line diagram, load schedules & other
documents for project compilation.
3 of 6
4. Design & Estimation of electrical control panels using “Bid manager” software
by EATON (USA) as per International standards such as IEC, BS, EN, NEC,
IEEE, ANSI & NEMA and considering project specifications.
Design includes Switchboards, Panelboards, Motor Control Console (MCC),
Power Distribution Board(PDB), Lighting Distribution Board(LDB), Load
centers, Mini Power Centers, Enclosed Controls, Enclosed Starters etc. for
supply in USA region.
Discuss with the team leader/members for doubts/clarifications.
Summarize the project and draft the project summary in the email and submit to
the client.
Complete the task in all aspects and submit the same in given timeline.
Review of feedback from client every week.
POWER ENGINEERING (INDIA) PVT. LTD.(GOA)POWER ENGINEERING (INDIA) PVT. LTD.(GOA)
From: May 2011 to May 2012
An ISO QMS 9001: 2008, ISO EMS 14001:2004 & OHSAS 18001: 2007 Certified.
PEIPL is one of the flagship companies of the Pai Kane Group of industries. PEIPL is an
authorized Generator Sets OEM of Perkins, Doosan, MTU, Mitsubishi, Lombardini engines.
Pai-Kane Group specializes in design, manufacture, installation, sales, maintenance and service
of silent diesel and gas generator sets with power ranging from 5KVA - 3000 KVA.
PEIPL is also a designer and manufacturers of purpose-built acoustic enclosures, Electrical
control panels like AMF, Synchronizing for DG & gas generators and also LT panels like PCC,
MCC, APFC, PDB, LDB, Meter panels, PLC and VFD panels..
Department: EPD( Electrical Project Division)
Designation: Trainee Engineer(EPD)
JOB RESPONSIBILITIES :
SWITCHGEAR DESIGN AND ESTIMATION
Review & study of tender specifications, Single line diagram, load schedules for
design & estimation.
Design of electrical control panels such as PCC, MCC, APFC, PDB, LDB,
Meter panels, PLC and VFD panels using Autocad as per project specifications
& standards.
Estimation of the panels with the help of Estimation solution software.
Preparation of drawings, project report and bill of quantities for submission.
Generating quotations as per the estimated product value.
TECHNO-COMMERCIAL SUPPORT
4 of 6
5. Technical proficiency in design engineering, costing and provide techno-
commercial Electrical control panel based power proposal / solution to the
customer.
Responsible for Tender or RFQ review / analysis and strategy.
Entrusted with the task of preparation of compliance / deviation statement and
responding to technical and commercial queries.
VENDOR DEVELOPEMENT
Actively involved in vendor development & management activities right from
assessment and pre-qualification of vendors to Technical and Commercial
evaluation of bids.
Registering the company as a supplier of products like LT panels and sheet metal
jobs.
Co-ordinating with customer for finalizing products in technical & commercial
terms.
Responsible for analyzing capability & aligning it with customer's requirement.
Responsible for customer's satisfaction with product price, quality and delivery.
KEY SKILLS
• Good knowledge in type testing of panels as per IEC standards.
• Extensive knowledge in Electrical equipment’s, 3 phase AC motors, DC Motors,
VFDs, soft starters etc.
• Hands-on Experience with Schneider Electric products such as ACB, MCCB, VFD,
Soft Starter, TESYS Motor Protection Relay etc.
• Sound knowledge in the electrical control panel designing & wiring.
• Familiar with ECODIAL(by Schneider Electric), & ETAP for Fault level
calculations & load flow analysis in an electrical system.
• Testing & troubleshooting of all LV panels.
• Good knowledge of Building Management System (BMS).
• Well versed in AutoCAD-2010 & Microsoft Office Suite.
• Capable of working independently with minimal supervision
TRAININGS AND WORKSHOPS
Attended training on Estimation solution software for design and estimation of
electrical control panels arranged by Iconic Infotech in New Mumbai.
Attended training on controller for DG synchronizing arranged by Deep Sea
Electronics.
Attended training on Basics of Industrial Standardization for Organisation (ISO) (In
house)
Completed training on MS Word, MS Excel, MS Power Point.
5 of 6
6. AWARDS AND ACHIEVEMENTS
Participated in NVS Regional Games & Sports Meet/Educational exhibition,
Government of India, held at JNV Sakegaon, Bhusawal Maharashtra from 23rd
September to 25th
September 2002.
Participated in NVS Cluster meet for Sports, Games & Educational exhibition,
Government of India, held at JNV Sakegaon, Bhusawal Maharashtra from 26th
September to 28th
September 2000.
EDUCATIONAL CREDENTIALS
Examination / Month & year of passing
Percentage
Institute
B.E in Electrical & Electronics
Engineering (July 2010)
56% Goa College of Engineering,
Ponda, Goa.
HSSC - CBSE Board (May 2005) 70% Jawahar Navodaya Vidyalaya
Canacona South-Goa
SSC - CBSE Board (May 2003) 78% Jawahar Navodaya Vidyalaya
Valpoi North-Goa
FINAL YEAR PROJECTS DETAILS
Completed final year project named “Design & Implementation of Wind
Turbine” under the guidance of “Goa Energy Development Agency”(GEDA),
GOA.
PERSONAL DETAILS
Name : Babli Chandrakant Naik
Date of birth : 22-08-1988
Gender : Male
Nationality : Indian
Marital Status : Unmarried
Passport No. : K0627562
Languages known : English, Hindi, Marathi, Konkani. ( can read, write & speak)
Interests : Reading, playing, watching science and technology related programs,
travelling, listening to music.
6 of 6
7. Permanent Address : Al Nahda, Dubai
Contact : +971562321887/+971558382328(M)
Email Id : babli.naik@gmail.com; babli.naik@live.com
DECLARATION
I hereby declare that the above information is true to the best of my knowledge.
Date:
Place: Dubai UAE
Babli Chandrakant Naik
7 of 6