This document summarizes the professional experience and qualifications of an individual. It includes:
- Over 7 years of experience as a Project Engineer reviewing specifications for ammonia plant revamp projects and other process equipment according to codes like ASME.
- B.Sc. in Mechanical Engineering from UET Lahore with a CGPA of 3.816/4.0 and experience interning at thermal power plants and automotive factories.
- Seeking long-term employment where they can further develop their engineering skills and experience working on projects involving equipment like waste gas boilers.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
JDs of Piping Engineer
1. Review of Bid documents, scope of work & client specification to kick off the project.
2 Designing of complete Skid mounted modular packages for complete EPCC Job as per Project Specifications and applicable codes and standards
3 Review of vendor documents to make sure compliance of Client Specifications and applicable codes & standards e.g. data /cut sheets of manual valves/instruments etc.
4. Preparation of package data sheets, reflecting all technical & vendor data for Client submission.
5. Leading and assigning piping tasks to team of design engineers & draftsmen.
6. Dealing with vendors to transmit technical requirements and closing of vendor’s TQ(s) specially piping material including valves, rupture discs, strainers, isolation kits etc.
7. Coordination with Client for approval for vendor data
8. 3D Modeling of the skids as per PID, project specifications, applicable codes (B31.3, API & ASME) and good industrial practices(PIPs).
9. Design Calculation for skid mounted modular packages and incorporation of changes in 3-D Model (if any) based on process requirements.
10. Issuing complete MTO(s) and MR(s) for entire modular packages.
11. Follow Up with Engineering Team for all Engineering Deliverables as per Project Specifications.
12. Follow up with engineering and fabrication team to meet the project schedule.
13. Piping Layout Drawings, Top View Equipment Layouts & Piping General Arrangement Drawings.
14. Making sure issuance of Piping Fabrication Drawings (Isometrics) with respect to correct rating, schedule and material.
15. Stress analysis based on project specifications and ASME B31.3.
16. Modify and revise designs to correct operating deficiencies or to reduce production problems.
17. Modification drawings of revamp project(s)
18. As building of Modular Packages.
19 Pre Commissioning Activities at Nigeria Site. Mechanically Hand Over of Skid Packages to Commissioning Team.
• Mechanical Engineering professional with extensive knowledge in the practical application of science and technology. Specialized in handling Marine Equipment such as Diesel Engines, Air Compressors, Hydraulics, HVAC and Boilers onboard oceangoing Merchant vessels
• 10+ years of proven track record of implementing strategies that enhance productivity and bring efficiency improvement in various machines
• Highly capable of handling health and safety regulations related to transportation of dangerous and hazardous goods such as crude oil, Chemicals, Gasoline at sea
• Possess exemplary communication and analytical skills in troubleshooting Mechanical, controls, Automation, and Electrical faults
• Expertise in providing documentation, detailed instructions, drawings, or specifications to advice Engineers onboard about how devices, parts, equipment, structures are to be fabricated, assembled, modified, maintained and used as per Makers Requirements for Efficient operation
• Ability to inspect Diesel Engine equipment, structures, or materials to identify the cause of errors or other faults
• Competent engineering skills in technical , operational and Maintenance of machines such as Diesel engines, Alternators, Turbochargers, Boilers, Air compressors, Air conditioning and Refrigeration, Hydraulic Machinery, Pumps, Control systems, Electrical equipments such as Motors and Automations of equipments
• Excellent communication and presentation skills in respect to Fuel efficiency, Machinery performance, Budget controls , Inventory of spares, Meeting Energy regulation requirements, implementation of ISO and ISM standards for safe and efficient performance of a vessel
• Core Competencies:
Good knowledge of Arc Welding and fitting job
Proficient in MS Office Applications, Internet, Research, E-mail,
Familiar with AutoCAD 2010 and advanced 3D modeling IDEAS
Proficient with Industrial Risk/Hazards assessment and certified in First Aid/CPR
Good communication skills in English both written and oral with fluency in Hindi, Punjabi.
Certified to work on High Voltage( >1000v) installations as a competent Engineer
Familiar with Canadian Health and Safety Regulations and WHIMS
Proficient in survival craft and Rescue Boat for Emergency Operations
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
• Mechanical Engineering professional with extensive knowledge in the practical application of science and technology. Specialized in handling Marine Equipment such as Diesel Engines, Air Compressors, Hydraulics, HVAC and Boilers onboard oceangoing Merchant vessels
• 10+ years of proven track record of implementing strategies that enhance productivity and bring efficiency improvement in various machines
• Highly capable of handling health and safety regulations related to transportation of dangerous and hazardous goods such as crude oil, Chemicals, Gasoline at sea
• Possess exemplary communication and analytical skills in troubleshooting Mechanical, controls, Automation, and Electrical faults
• Expertise in providing documentation, detailed instructions, drawings, or specifications to advice Engineers onboard about how devices, parts, equipment, structures are to be fabricated, assembled, modified, maintained and used as per Makers Requirements for Efficient operation
• Ability to inspect Diesel Engine equipment, structures, or materials to identify the cause of errors or other faults
• Competent engineering skills in technical , operational and Maintenance of machines such as Diesel engines, Alternators, Turbochargers, Boilers, Air compressors, Air conditioning and Refrigeration, Hydraulic Machinery, Pumps, Control systems, Electrical equipments such as Motors and Automations of equipments
• Excellent communication and presentation skills in respect to Fuel efficiency, Machinery performance, Budget controls , Inventory of spares, Meeting Energy regulation requirements, implementation of ISO and ISM standards for safe and efficient performance of a vessel
• Core Competencies:
Good knowledge of Arc Welding and fitting job
Proficient in MS Office Applications, Internet, Research, E-mail,
Familiar with AutoCAD 2010 and advanced 3D modeling IDEAS
Proficient with Industrial Risk/Hazards assessment and certified in First Aid/CPR
Good communication skills in English both written and oral with fluency in Hindi, Punjabi.
Certified to work on High Voltage( >1000v) installations as a competent Engineer
Familiar with Canadian Health and Safety Regulations and WHIMS
Proficient in survival craft and Rescue Boat for Emergency Operations
As a Mechanical Engineer in the Oil and Gas Industry, would like to continue to expose to the challenges and latest Technology in this industry and make the best use my education, acquired skills and experience for personal and Organization growth.
2012-2016 Writer of a book entitled “Fundamental of Power Plant Engineering and its Main Equipment” in 1070 Pages.
2015 Taking part in EPGC CONFERENCE and presenting an essay entitled "Heavy fuel oil treatment and reducing fuel impacts on gas turbines and its maintenance"
2016 Modification of Anti-icing system at V94.2 gas turbine compressor bell-mouth and Inlet Guide Vane (IGV)
2016 Development of modeling of Iranian refinery divisions
Under Publishing Writer of a book entitled "Evaluating and Improving Steam Turbine Performance"
Under Publishing Editor of the book entitled "combined cycle power plants operation and maintenance"
1. Professional Experience
Fatima Fertilizers Company Limited, Sadiqabad Pakistan (14-07-2014-to date):
Working as a Project Engineer in Revamp Project of Ammonia Plant from 1500 to 1800 MTPD
Technical review of Waste Gas Boiler specifications as per ASME Codes (B31.1, B31.3, Sec-I,
Sec-VIII)
Technical review of High Pressure Steam Let down station specifications and its installation
Thorough working on thickness calculations and modified piping specifications for HP Let down
Station
Thorough review of Pressure Vessels drawings and specifications as per ASME Sec-VIII Div-I
Heat Exchangers design and specifications review as per TEMA
Cooling Tower specifications and its construction
Technical review of Cold Gas Filter elements with its purchasing and installation
Thorough review of metallurgy of different projects as per ASTM, ASME, JIS and DIN material
Standards
Projects
Seeking long term employment in a reputed organization where I can grow professionally and further
enhance my skills, knowledge and experience to face and overcome the challenges of today’s changing work
environment.
Waste Gas Boiler :
Working on review of Boiler specifications which uses waste and natural gas as feed gas
and having capacity of 90 t/hour steam. Design is based on ASME Sec-I.
Final year project :
Mechanical footsteps: Energy is produced by the pressing power of feet, embedded in
ground. It includes modeling of assembly in solid edge and feasibility study of its
implementation.
M. Tahir Amjad
92(321)4959891, 92(323)8489229
tahiramjad92@yahoo.com
13-D, Al-Faisal Town, Lahore Cantt.
Qualifications
Objective
B.Sc. Mechanical Engineering CGPA: 3.816 / 4.0
(2010-2014) University of Engineering & Technology Lahore
(Made into Dean’s Honor List for 7 times in 8 semesters)
F.Sc. Pre - Engineering 85% (Grade A+)
(2007-2009) Military College Jehlum.
Matriculation 88.35% (Grade A+)
(2005-2007) WAPDA Cadet College, Tarbela.
(2nd
position in college)
2. Interests & Sports
Current Affairs, General Knowledge
Cricket (Department Level)
Swimming, Chess, Badminton
Softwares
Primavera/MS Project
Auto Pipe
Auto Cad
MS Office
GENCO Thermal Power Plant, Muzaffargarh [18th
June -19th
July 2013]
Leadership Experience
Class Representative at UET
Final year project Leader
Group leader in different competitions
Achievements
Consistent first position holder from 1st
-7th
standard
Best Cadet of Jinnah House
Four green slips at Military College Jhelum
As social secretary; clinched the title of “The Champions” for house
Secured positions in English debates
Remained in top 10 students while at UET.(total 250)
Initiative for the education of poor kids (Hanging Dreams) in aid with Akhuwat.
Active member of ASME, hosted many seminars on behalf of ASME.
Represented UET at “Lahore chamber conference on Technology up gradation in industry”
GAT score 70 (97.69 percentile)
Reference
Will be furnished on demand.
Internships
Performed 4 weeks internship
Sedulous study of energy production by using heated steam
Study and analysis of the boiler, turbine and sub units
HONDA Atlas Cars, Pakistan Limited [20th
July-24th
Aug 2013]
Explored entire factory with intend to learn every process of car manufacturing
Practical experience of professional working in HACPL
Learnt some technical tactics from Japanese workers