Rizwan Javed has over 7 years of experience as a mechanical engineer working on projects in Saudi Arabia and Pakistan. He holds a B.S. in Mechanical Engineering and is registered with the Saudi Council of Engineers and Pakistan Engineering Council. Currently he works as a Mechanical Site Engineer for Baytur Construction in Saudi Arabia, overseeing HVAC, firefighting, and plumbing systems. Previously he has worked on projects for a medical university and cement company in Pakistan.

1. Rizwan Javed
________________________________
Experience
Almost 07 Years working experience as Project Mechanical Engineer in various projects in Abha,
Saudi Arabia (Medical University, 07 Buildings and 1 Teaching Hospital of 800 Beds) and LakiMarwat,
Pakistan (Non Process Buildings in Lucky Cement).
Qualification
B.S.c Mechanical Engineering2004-2008
B.Z University Multan
Percentage 88.64%
Registered With Saudi Council of Engineers and Pakistan
Engineering Council
Current Employer
Saudi Arabian Baytur Construction
Company June 2011 To Date
Mechanical Site Engineer (HVAC,Fire Fighting &Plumbing)
Consultant: Zuhair Fayez Partnership
Main Achievement : Engineer Of the Month
Project: King Khalid University Medical City Phase II Abha,KSA.
This Project included construction of six buildings including Main Teaching
Hospital (800 beds), College of Medicine, College of Medical Sciences,
College of Dentistry, College of Pharmacy and Shared Lecture Halls with
Project Value: 2,429,055,320 SAR, I am responsible for College Of
Medical Sciences building and involved in all mechanical works like
HVAC, Plumbing, Fire Fighting, Irrigation, LPG Gas, Fuel, Vaccum
and Compressed air.
 Responsible for installation, testing, and commissioning of HVAC,
Plumbing System and Medical Gas Systems.
 Preparation of material submittal (including market research for
pricing), method of statement & MTO.
 Posses a working Knowledge of applicable specifications,
procedures, drawings, standards and codes.
 Able to perform design reviews.
 Coordination of field work, working closely with design
Date of Birth
November 19, 1986
Home Address:
Insaf Corporation
Grain Market Sadiq Abad, Pakistan
Contact Nos:
Inside KSA 0096653-1325632
Inside Pakistan0092321-6344953
E E-mail: rizwan221@hotmail.com

2. engineering, procurement, planning/scheduling, suppliers and
sub-contractors.
 To raise RFI for approval of mock up and installation activities.
 Attend the meeting with consultant, subcontractor and vendors.
 Heating and cooling load calculations using elite CHVAC software.
 Prepare program of works in coordination with main contractor’s
program and allocate the manpower accordingly. Monitor site
progress as per planned program.
 Review contract scope of work and specifications & verify technical
clearance of invoices for subcontractors and vendors.
 Co-ordinate with QA / QC and directly reporting to the MEP
manager
 To coordinate with other engineering discipline to ensure that
work should progress smoothly.
 To prepare monthly and weekly program of works
 Installation of all kinds of air-conditioning & plumbing equipments
such as Fcu’s, Ahu’s, Fahu’s, chillers, pumps, Heat Exchanger,
Storage Calorifiers, Exhaust Fans, PressurisationFans,VavCav,
Fcva’s,Fdv and all other Plumbing fixtures.
 Remains knowledge of safety policies, procedures and performs
assigned duties in a safe manner.
Industrial Buildings Construction (I.A.S)
Project: Non Process Buildings in Lucky
Cement, LakkiMarwat
Mechanical Site Engineer March 2008 to April 2011
 Have good expositors to install and commissioning of mechanical
equipments like pumps (multistage centrifugal pumps, transfer
pump, jockey pump, diesel pump, electric pump, booster pump,
etc.), heat exchanger chilled water system along with horizontal &
vertical piping,
 Fresh air handling units(Fahu) With Vav&Cav System, Fan Coil
Unit (Fcu), ducts For Heating, Ventilation & Air Conditioning
 Storage tanks for potable and fire water, piping of fire fighting for
riser, fire hose cabinet (Fhc) & Sprinkler System (high & low zone
with zonal control valve). Also gain experience on water supply
and drainage system.
 Mechanical services shop drawing reviews and feedback to the as-built
drawings.
 Managing the site for quality, on time and safe production.
 Coordination with the other disciplines and subcontractors
 Supervision of work
 Testing, commissioning and handover to client.
 Selection of materials and equipments. Material submittal
submission preparation and taking the approval.
 Quantity take off for all the mechanical services.
 Site coordination and planning for efficient and proactive

3. establishment of works.
Waste Heat Recovery Project in Lucky Cement Limited PezuDistt.
LakkiMarwat
Fauji Fertilizer Company F.F.C, Goth Machi
8weeks Internship 2007
 Job handling procedure
 Machinery Installation and Maintenance
 Equipment Maintenance installation.
Jamal-din-Wali Sugar Mills JDW, Jamal-din-Wali
12 weeks Internship 2006
 Mill House Installation.
 Boiler House installation.
Projects
Academic Project
 Energy auditing in Colony Textile Mills in co-ordination with
National Productivity Organization (NPO)
Final Year Project
 Design of Heat Exchanger for galvanizing plant in Pakistan
Engineering Company (PECO) LAHORE
Computer Skills
 Auto Cad 2-D, 3-D
 Pro Engineering Basic Knowledge
 Ansys Basic Knowledge
 Computer Languages C programming
 Microsoft Application Windows 98/XP, Word, Excel, Power
Point
Achievements & Social Skills
 Nominated for award of Gold Medal
 Completed Engineering degree with Honours
 Class Representative throughout four years of Engineering
 Winner of Table tennis, Runner up in Snooker (University
Sports in 2007 & 2008)
 Organizer of Department Events and University annual sport
Personal Details
Marital Status Single
Languages Urdu, English,Punjabi, Hindi, Turkish.
Passport CH8676411 (Pakistan)
Driving License Pakistan and Saudi Arabia
*References can be provided on demand.