Mechanical Supervisor, Maintenance Department, Iraq / Basra Lukoil Overseas Service B. V. - West Qurna-2 Project

1. CV
NAME Djuraev Murodillo
Place of birth Beshkent, Uzbekistan Date of birth 25.02.1977г. Citizenship Uzbekistan
Place of
residence
Postal code 100190
Registratio
n address
Postal code 111200
17 O.Gozikhonov str., Durmon region, Kibrai,
Tashkent oblast, Uzbekistan
Apt.26, 32 Zebuniso str.,
Kibrai, Tashkent oblast,
Uzbekistan
Marital status Married, 4 children Military service commitment
Non-
obliged
Phone
numbers
Mobile
+998931714635
+9647809250820
Home +998712860708
E-mail personal: djmurodilla@mail.ru
work: mdjuraev@lukoil-overseas.uz
Murodillo.Djuraev@lukoil-overseas.com
Identification document number
Issued by and on
Passport attached
Driving License B and C Charged with criminal or administrative offence NO
Total work experience 16 years
Total work experience in
foreign companies/countries
11 years
From 2005 to present time
WORK EXPERIENCE
PERIOD: From 02.2013 to present time
COMPANY:
(NAME, SITE)
LUKOIL Mid-East Ltd. - West Qurna-2 Project.
LUKOIL Lukoil Overseas Service B.V.
http://www.lukoil.com
INDUSTRY:
Oil production and processing
Oil and gas sector
POSITION:
Supervisor Mechanical CPF, Maintenance Manager Service, Site, Basra, Iraq
Mechanical Foreman, Maintenance Manager Service, Site, Basra, Iraq
MAJOR
DUTIES
Planning of works for mechanical equipment maintenance in the field.
Works on maintenance of mechanical equipment in the field.
Analysis of reliability of the mechanical equipment, preparation of activities on decreasing faults
and increasing reliability. Analysis of root causes of equipment failures.
Quality control of works on construction and commissioning of mechanical equipment.
Performance of works schedule for equipment maintenance.
Performance of works on maintenance, modernization, as well as startup and commissioning works
in new facilities.
Preparation of design and working documentation on mechanical equipment maintenance.
Performance of control over contactor’s performance of contractual obligations, including
elimination of defects, performance of obligations by warranty on operating and commissioned
equipment.
Inspection of safety locks, vessels, pipelines, lifting equipment, load gripping mechanisms and
rotating equipment.
Numeric values:
- Number of subordinates: 86 Iraqi technicians and 52 contractors.
- Maintenance of pumping and compressor equipment – 450 units
- Maintenance of clusters – 5 units
PERIOD: From 12.2009 to 02.2013
COMPANY: LUKOIL Uzbekistan Operating Company, Uzbekistan

2. (NAME, SITE) http://www.lukoil-overseas.uz/
INDUSTRY:
Oil and gas production
Oil and gas sector
POSITION:
Senior expert on technical inspection and corrosion protection,
Technical inspection and corrosion protection department.
MAJOR
DUTIES
Participation in committees on acceptance of facilities for operation and acceptance of chemicals.
Consulting support to other divisions. Corrosion protection.
Preparation and control over performance of plans and programs on protection of facilities in the
system of in-cluster, in-field and major pipelines.
Organization and control over performance of field tests.
Organization and control of work of the contractors.
Organization of the technical control over compliance with the safety rules and regulations, quality
of maintenance and repair works, commissioning, modernization of the equipment and facilities.
Inspection of facilities, communications and electrical-chemical protection at the operational
facilities of LUKOIL Uzbekistan Operating Company.
Performance of works on improvement of anti-corrosion protection and elimination of causes and
growth of corrosion damages in oil and gas technological pipelines and equipment.
Developed 12 internal regulatory documents and took part in development of 2 standards for
LUKOIL Uzbekistan Operating Company.
PERIOD: From 11.2008 to 10.2009
COMPANY:
(NAME, SITE)
Asia Caspian Engineering Co., UAE
http://acecogrp.net/
INDUSTRY: Oil and gas, chemical sector
POSITION:
Head of commissioning projects
Technical Manager
MAJOR
DUTIES
Support to projects, commissioning, pre-commissioning, startup and post-startup works in oil-
chemical, chemical, oil and gas processing, metallurgical industry.
Assembly, pre-commissioning, startup and post-startup works and maintenance of equipment in oil-
chemical, chemical, oil and gas processing in CIS countries.
PERIOD: From 04.2005 to 11.2008
COMPANY:
(NAME, SITE)
ENCE GmbH, Switzerland
http://www.ence.ch/rus/index.php
INDUSTRY:
Engineering services and supply of modern technological equipment to oil and gas, and chemical
companies
POSITION:
Head of mechanical department on commissioning,
startup and maintenance of equipment
MAJOR
DUTIES
Assembling, pre-commissioning, startup, post-startup works and maintenance in oil-chemical,
chemical, oil and gas processing, metallurgical industry, cement production in CIS countries.
Organization of works on commissioning, startup and repairing of heat exchangers,pressure units,
pipeline fittings, etc.
PERIOD: from 05.2000 to 04.2005
COMPANY:
(NAME, SITE)
Shurtan Gas Chemical Complex, (UZBEKNEFTEGAZ), Uzbekistan.
http://sgcc.uz/
http://ns.uzneftegaz.uz/
INDUSTRY:
Processing of gas, gas condensate and production of liquefied gas, gas condensate, polyethylene
granules and granulated sulfur
POSITION: Mechanical engineer, ethylene section
MAJOR
DUTIES
Startup, repairs and maintenance of static and rotating equipment of different types: stands,separators,
heat exchangers,vessels, filters, pipeline fittings, spring relief valves, piston and centrifugal pumps,
compressors and turbines.
EDUCATION
MAJOR
EDUCATION
Karshi State University, Uzbekistan. Faculty – cryogenics,
Major – Mechanical Engineer,
Higher education (diploma with honors)
Period: from 1994 to 1999
Russian Oil and Gas University after Gubkin
Oil and Gas Company Management
Oil and Gas Production. Professional qualification with assignment of additional qualification “Oil
and Gas Production”

3. Period: 2012 – present time (7 modules)
TRAININGS:
(SUBJECT,
PROVIDER,
PERIOD,
HOURS,
LOCATION)
Administrative management, Tashkent State University, Uzbekistan, from 07.1995 to 08.1995
Theoretical and practical course for operation and maintenance of static and rotating equipment. LG
Petrochemical Co, South Korea, from 10.10.2001 to 22.10.2001
Electrochemical protection of equipment and pipelines. Russian Oil and Gas University after Gubkin,
Moscow, from 01.11.2010 to 05.11.2010
Corrosion, corrosive cracking, diagnostics, forecasting of long life. Institute of additional professional
education in Ufa State Oil Technical University, Ufa, from 22.11.2010 to 26.11.2010
Application of LINSOFT software for analysis of major pipeline in-pipe inspection data. LIN SCAN,
UAE, from 27.09.2010 to 28.09.2010
Visual and measurement method of non-destructive control. Qualification level II. Educational center
of Non-Destructive Control PersonnelEducation Bureau,NMZ NGMK,Uzbekistan, from 19.09.2011
to 30.09.2011
Ultrasound non-destructive control method. Qualification level I. Educational center of Non-
Destructive Control Personnel Education Bureau, NMZ NGMK, Uzbekistan, from 26.03.2012 to
06.04.2012
Oilfield chemistry, Perm-neft qualification improvement center, Perm, Russia, from 14.05.2012 to
18.05.2012
Bearing Installation, Maintenance, Troubleshooting & Failure Analysis.
from 26.10 to 30.10.2014, Abu Dhabi, UAE
Training course for straight field lamination joint GRE/GRV pipes.
from 18 to 25.01.2014, Future Pipe Industries, Abu Dhabi, UAE
Crane & Lifting Operations Safety and Rigging & slinging operation safety.
from 09.10.2014 to 12.10.2014, Basra, Iraq
NUMERIC VALUES
PARTICIPATION IN PROJECTS FROM CONSTRUCTION, STARTUP AND OPERATION
1
LUKOIL Lukoil Overseas Service B.V. LUKOIL Mid-East Ltd.
West Qurna-2 Project. Mishrif Early Oil and Mishrif FFD, Basra, Iraq
2
Khauzak gas production section and Gissar oil production section, LUKOIL Uzbekistan Operating Company,
Uzbekistan
3
Embamunaigaz, Kazakhstan, Zaburunye field: commissioning, startup and training of client’s technical
personnel for operation of Sundyne pumps.
4 Kaspineft, Kazakhstan: commissioning, startup and training for operation of WOMA pumps.
5 Nakolaevsky Alumina Refinery, Ukraine: design works, repairs and control over repairs in alumina ovens.
6 Maham-Chirchik, Uzbekistan, Ammonia-2 section: repairs and control over repairs in ammonia ovens.
7
Maham-Chirchik, Uzbekistan, Carbamide section: commissioning, startup, repairs and training of client’s
technical personnel for operation of Sundyne pumps
8
Bukhara Oil Refinery, Uzbekistan: commissioning and startup of equipment (Apollo, Warman,Sundyne, Ebara,
Bungartz, Kamat, MITSUBISHI Heavy Industries, Multotec, Shin Nippon Machinery, Wariopumps, Becker,
Toyo).
9
Shurtan Gas-Chemical Complex with companies ABB Lummus-USA, Toyo Engineering-Japan, COIMI- Italy,
Ipedex-France.
FOREIGN LANGUAGES
Proficiency level Fluent Good Satisfactory Bad Special terminology
Uzbek
speaking + +
writing + +
Russian
speaking + +
writing + +
English
speaking + +
writing + +
Kazakh
speaking + +
writing +
Kirgiz
speaking +
writing +
Arabic
speaking +
writing +

4. PC AND SOFTWARE SKILLS
MS Windows 2010 XP; MS Office; Scanner, Photocopy Internet; AutoCAD; PDF,SAP R3; ESDO. Software for
measurement of vibration and equipment diagnostics.
Fast-learning.
TYPINGSPEED RUS LAT
Over 100 Over 100
REQUIREMENTS TO NEW JOB
What minimum salary level you are expecting To be
agreed
Salary level in last company
Business trips Frequently Working day Overtime accepted
Do you have any limitations for working conditions NO
Latest medical check 27.01.2016, Moscow. Healthy
PERSONAL QUALITIES Ready for hard work, business trips and overtime work. Easily adapting to any
conditions. Good communication skills. Energetic, sociable, responsible, honest,
confident, independent, details-oriented, hard-working. Skilled for planning and
organization of works, analysis of problems and decision-making. Cross-cultural
mentality.
I have no objections from clarification of the provided information.
Date of filling: "_____" ______________2016 Signature: _______________