Murtaza Asad is a specialist design planner with over 17 years of experience in telecom planning for fiber optic, FTTH, backhaul wireless systems, and projects. He has worked for Etisalat in both Pakistan and the UAE, planning networks and designing fiber connectivity for GPON FTTx projects. Some of his responsibilities include design and planning projects with detailed drawings and fiber management, preparing bills of quantities and cost estimates, obtaining necessary permissions, and updating documentation. He is proficient in planning for GPON, GSM sites, IP-VPNs, and more using GIS systems.

1. ENG MURTAZA ASAD, murtaza.asad@yahoo.com , + 971588915630
BE, MBA
Specialist Design Planner ,FTTH, CCTV,IPVPN,3G,4G Fiber Backhaul wireless System
working in , GIS .civil works ,Planner FTTH,GSM ,3G,4G Backhaul for wireless system
design and develop Outside Plant networkinstallations, modifications, and upgrades.
Design & Plan the Project with detail Drawings,Fiber Management, Preparation of BOQ for individual Estimate,
submitthe requirement and obtain authority permissionsif any,updatingRecord/documenta tion on completion
of work GIS, GPON Network, DSR, as builtdrawings etc.
Installation of OLT shelf with boards.
Roding & roping shall berequired, where there is no rope exists in the duct.
Check NOC for Villas,buildings,complex,high risebuilding,shoppingmalls ,Hospital,and warehouse, factories.
To install/Pull an underground Fiber Optic cable(>600F) insidea duct from Exchange to Exchange and or Exchange
to FDH and or up to the point of termination).
Draw cable(fiber , Copper) in duct or replacecable, the activity involves labeling,coiling, with supply & install of
Draw rope etc
Installation or Recovery of FDH /ODF cabinet in Indoor includingcollection fromstoreand return with packing.
Pulling/Layingof drop Cablefrom Telecom Room (i.e. ODF/FDH/FDB) to Customer premises (up to the point of
termination ) includingtermination atboth ends and rosette with recovery of damaged/faulty fiber. Including
supply of Materials.
1) Fixingthe ONT directly to the wall as per company standard installation procedures and guidelines.
2) Connecting the fiber drop cableto the ONT inputand powering ON the ONT.
3) Coordinatewith ISO Team, provide the ONT Serial Number and confirmthat the ONT has been registered as
active/installed in the PMS.
4) Patch cord installation up to 5 meter is partof the respective installation or faultdockets clearance.
Civil works.
Layingof 100 mm (D 54) PVC duct or equivalent in open trench includingsupply of Ducts and Accessories.
Construct castin situ or provideprecastjointbox type-JRC4 (with supply/providingand fixingof frame & cover
with required furniture, duct connectivity,poke out, as per drawingetc.).
Work Experience 17 Years in telecom Specialist Design Planner Costing in Fiber,FTTH, Backhaul wireless
System Projects
Level I &IIDesign Planner Costing in
Fiber,FTTH,GSM Backhaul wireless System
Projects 2001 TO 2008 ETISALAT GROUPIN PAKISTAN
Level II Design Planner Costing in
Fiber,FTTH,GSM,3G Backhaul wireless
System Projects
2008 TO 2012 ETISALAT IN UAE
Specialist Design Planner Costing in
Fiber,FTTH, 3G,4G ,CCTV,Backhaul wireless
System Projects
2012 TO 2016 ETISALAT GROUPIN PAKISTAN
Specialist Design Planner Costing in
Fiber,FTTH, 3G,4G,CCTV Backhaul wireless
System Projects 2017 TO TILL
DATE
ETISALAT PROJECT WITH Xad
COMPANY IN UAE

2. Level I &II Design Planner Costing in Fiber,FTTH,GSM Backhaul wireless System Projects
LevelI &II 2001 TO2008
Engineer - Optical Fiber Access Network OSP / ISP, Multimedia & Broadband.
 Working in planningdepartment Fiber GSM.
 KPI of GPON Operation and Maintenance.
 GPON migration project.
 Maintenance of Optical fiber Access Network, ONU (Optical Network Units).
 Installation and maintenanceof, ISDN/BRI, ISDN/PRI, DXX, DSL and other corporateservices.
 To providethe ADSL serviceto the existingPTCL/ PSTN customers.
 Co-ordinate with Optical Fiber Network department to enable the ONU for
provision of DSL service(ADSL cards 16 ports)
 planner
Level II Design Planner Costing in Fiber,FTTH,3G,4G,CCTV Backhaul wireless System Projects
 Etisalat ,Abu-Dhabi , UAE………………………………….(2008-2012)
 Planner FTTX/OSP
Workingin Access Network Project
 Planningfor GPON, GSM sites,IP-VPN, etc on GIS system.
 Feasibility and Costingfor Recharge Estimates for IPVPN (Main & Backup Links), Site Offices etc.
 Issuanceof Projects.
 Feasibility & Site Survey for projects.
 Project Implementation under PMI guidelines.
 Deployment within timeline and under cost baseline.
 Project planner FTTX/OSP/PON / ENGINEER
 PlanningDesigningof fiber connectivity for GPON FTTx projects PlanningDesigningof fiber connectivity for
GPON FTTx projects
 Level II Design Planner Costing in Fiber,FTTH, Backhaul wireless System Projects
 March 2008 to 2012
 National Bank of Abu Dhabi - IPVPN Connectivity , Backup Links , and Disaster Recovery Links.
 EtisalatGSM 3G & 4G (LTE) Project
 Planner FTTX/OSP/PON
 Level II Design Planner Costing in Fiber,FTTH, Backhaul wireless System Projects
 January 2011 to 2012
 MobileAccess network Modernization
 Planner ENGINEER
 MobileAccess network Modernization for more than 3500 GSM sites in Abu Dhabi.
 Planner FTTX/OSP/
 Telecom Engineer in Telephone Exchange Karachi)(2004-2008)
 Look after the expansion (CAPEX) work in Telephone Exchange

3.  Preparation of Detail Estimates (Estimation Form (Cabinet Area Wise) including”Cabinets,Tail Joints of
Primary / Secondary Cables,Secondary Cables,DPs, Sub-loops,Customer Premises’Termination”).
 CarryoutMaintenance/Renovation of Access Network, i.e. Primary cables,Cross Connection cabinets,
secondary cables,Distribution PairBoxes,Customer loop renovation etc.
 Maintenance of Optical fiber Access Network, ONU (Optical Network Units).
 Coordination with the staff to rectify the faults on FaultManagement System.
Specialist Design Planner Costing in Fiber,FTTH, 3G,4G,CCTV Backhaul wireless System Projects
 2012 to 2016 Etisalat group PTCL,and Etisalat project with Xad company 2017 to till date
 Eng Design PlanningCosting project
 Design & Plan the Project with detail Drawings,Fiber Management, Preparation of BOQ for individual
Estimate, submitthe requirement and obtain authority permissions if any,updatingRecord/documentation on
completion of work GIS, GPON Network, DSR, as builtdrawings etc.
 Objective

Currently lookingfor a challengingnew position,one which will make best use of existingskillsand
experience, whilstenablingfurther personal and professional development and increased responsibility.

 Summary

 A hard-working,determined and dedicated individual,who is passionateaboutdeliveringexceptional
customer servicestandards whilstensuringthe achievement of demanding targets and business objectives.
 Quick to grasp new ideas and concepts, always keen to develop new skills and expertiseand is ableto
demonstrate a logical and analytical approach to solvingcomplex problems and issues.Ableto work
effectively on own initiative,demonstratingthe motivation,organization and time management skills
required to complete all tasks on time and to the required quality standard.Works with both safety and
quality in mind,ensuringthat neither factor is compromised whilecompleting work responsibilities.
 Articulateand approachable,possesses excellentinterpersonal and communication skillsand the ability
to develop positiveworkingrelationshipsboth internally and externally.Enjoys beingpartof a successful
and productive team and thives in highly pressurized and challengingworkingenvironments.
Education
MBA, marketing (2 years)
Bachelor of Engineering (2001)(Electronics)
NED University of Engineering and Technology Karachi (4 years)
Skills & Expertise
 Planner FTTX/OSP/PON ENGINEER
Fiber Optics,Telecommunications,Network Design, GPON, Project Planning,
Optical Fiber,OSP, Access Networks, FTTx, NMS,GIS

4. ro,iWx4x