This curriculum vitae summarizes Gianni Luigi Paolillo's professional experience. He has over 30 years of experience developing high voltage power supplies for industrial x-ray and medical systems. His most recent role is as an Electronic Team Manager at ProSer S.r.l., leading a team developing bespoke military, industrial and medical power supplies from 50V to 500kV. Previously he held several senior engineering roles developing high voltage power supplies up to 350kV and 4.5kW at various companies. He has expertise in power electronics, cooling systems, and high voltage insulation technologies.
Industrial Heating Elements, Radiant Heater for Defrosting – Chhaperia is well-known suppliers of a tubular heating element and electrical appliances, India
Done by Group: OBK-Pro_Mechanics7
School: Omar Bin Alkhattab Independent School for Boys
Smart Sensors: Gives knowledge about smart sensors and the PVDF films through activities, experiments and projects which depend on smart sensors.
This group has done several activities and experiments related to the Smart Sensors module and they started to think about a project to design and invent. Their ideas lead them to design Lifesaving watch (LSW) and Smart attendance counter (SAC).
IEEE PROJECTS FOR ECE 2013 2014, 2013 - 2014 IEEE PROJECTS FOR ME,M.TECH,B.E,B.TECH BOTH SIMULATION AND HARDWARE PROJECT TITLES WITH LATEST TECHNIQUES AND CONCEPTS FOR FINAL YEAR STUDENT PROJECTS USING EMBEDDED AND ROBOTICS
Microcoulomb Analyzer is designed by the microcoulomb analysis technology and Faraday law.The sample is
injected into the combustion tube, oxidative pyrolysis converts the sulfur to sulfur dioxide which then fows into a
titration cell where it reacts with triiodide ion present in the electrolyte.
Industrial Heating Elements, Radiant Heater for Defrosting – Chhaperia is well-known suppliers of a tubular heating element and electrical appliances, India
Done by Group: OBK-Pro_Mechanics7
School: Omar Bin Alkhattab Independent School for Boys
Smart Sensors: Gives knowledge about smart sensors and the PVDF films through activities, experiments and projects which depend on smart sensors.
This group has done several activities and experiments related to the Smart Sensors module and they started to think about a project to design and invent. Their ideas lead them to design Lifesaving watch (LSW) and Smart attendance counter (SAC).
IEEE PROJECTS FOR ECE 2013 2014, 2013 - 2014 IEEE PROJECTS FOR ME,M.TECH,B.E,B.TECH BOTH SIMULATION AND HARDWARE PROJECT TITLES WITH LATEST TECHNIQUES AND CONCEPTS FOR FINAL YEAR STUDENT PROJECTS USING EMBEDDED AND ROBOTICS
Microcoulomb Analyzer is designed by the microcoulomb analysis technology and Faraday law.The sample is
injected into the combustion tube, oxidative pyrolysis converts the sulfur to sulfur dioxide which then fows into a
titration cell where it reacts with triiodide ion present in the electrolyte.
SUNLIGHT CONTROLLED LAMP!!! This presentation gives you the Knowledge of working of Street lamps; Night decors etc...Nowadays it has been widely used and developed itself in very wide range....So this presentation might help all the viewers to construct small STREET LAMP aka SUNLIGHT CONTROLLED LAMP!!!
Electrical Products in KSA , main suppling products in Saudi market , Schneider partner, SMA, Legrand , www.electric-house.com , Power center for all types of panels
KEMET Webinar - KEMET E2Di - The ultimate guide to KEMET digital toolsIvana Ivanovska
Become an expert on doing quick searches to find the right ceramic part for your design, create plots for capacitance, ESR and other electrical properties, and estimate aging effect on ceramic capacitors
Niet is the leading institute in electrical engineering field. Niet also provides diploma in electrical engineering through distance mode and one can also do part time electrical engineering
International Journal of Advanced Research in Electrical and Electronics Engi...arpublication
Authors are invited to submit original research results, case studies, conference extended paper, surveying works and industrial experiences that describe significant advances in Engineering and Science Technology.
My project intrumentation - CO2 Detector with Arduino UnoAhmad Zaenudin
We From 7 group Instrumentation
Refrigeration and Air Conditioning Engineering
Bandung State of Polytechnic
Ahmad Zaenudin (151611002)
Jonathan Mesakh (151611014)
Nurfita Widiastuti (151611018)
and Supervisor Ismail Welid
Optimizing Operation & Maintenance Practices for Solar Power Plantsolariggensol
Bringing global best practices to India, Solarig Gensol Utilities maximises generation of a Solar PV Power Plant by a combination of sophisticated software & tools and a disciplined approach Operation & Maintenance.
SUNLIGHT CONTROLLED LAMP!!! This presentation gives you the Knowledge of working of Street lamps; Night decors etc...Nowadays it has been widely used and developed itself in very wide range....So this presentation might help all the viewers to construct small STREET LAMP aka SUNLIGHT CONTROLLED LAMP!!!
Electrical Products in KSA , main suppling products in Saudi market , Schneider partner, SMA, Legrand , www.electric-house.com , Power center for all types of panels
KEMET Webinar - KEMET E2Di - The ultimate guide to KEMET digital toolsIvana Ivanovska
Become an expert on doing quick searches to find the right ceramic part for your design, create plots for capacitance, ESR and other electrical properties, and estimate aging effect on ceramic capacitors
Niet is the leading institute in electrical engineering field. Niet also provides diploma in electrical engineering through distance mode and one can also do part time electrical engineering
International Journal of Advanced Research in Electrical and Electronics Engi...arpublication
Authors are invited to submit original research results, case studies, conference extended paper, surveying works and industrial experiences that describe significant advances in Engineering and Science Technology.
My project intrumentation - CO2 Detector with Arduino UnoAhmad Zaenudin
We From 7 group Instrumentation
Refrigeration and Air Conditioning Engineering
Bandung State of Polytechnic
Ahmad Zaenudin (151611002)
Jonathan Mesakh (151611014)
Nurfita Widiastuti (151611018)
and Supervisor Ismail Welid
Optimizing Operation & Maintenance Practices for Solar Power Plantsolariggensol
Bringing global best practices to India, Solarig Gensol Utilities maximises generation of a Solar PV Power Plant by a combination of sophisticated software & tools and a disciplined approach Operation & Maintenance.
Electrical Installation Guide 2013, provided by Schneider Electrics. Inspect about all the types of electrical categories such as switch-gears, power factor, harmonics, protection, Distribution etc.....
Slides from my presentation at the IEEE NSS/MIC 2019 in Manchester.
IDEAS designs electronic integrated circuits, radiation detectors and imaging systems. IDEAS is a fabless IC and systems supplier.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
1. Curriculum Vitae
Name: Gianni Luigi Paolillo
Birth date: 02.08.1960
Address: via Marinai d’Italia, 12
24067 Sarnico (BG), Italy
Mobile: 00393384721059
email: glpaolillo@bluewin.ch
IEEE member N° 40313050
Professional Skills Knowledge of different topologies of high power and high voltage power
supplies and application of MOSFET, IGBT, Diode, SCR, GTO, IGCT;
development of cooling system with air, water and oil; interactions of dielectric
materials with electric fields.
PROFESSIONAL EXPERIENCES
March 2016
ProSer S.r.l.
Rome,
Italy
Electronic Team Manager
Leader of a team of 4 technicians devoted to the development of
bespoke military, industrial and medical power supplies from 50V to
500kV.
October 2014 / February 2016
AEI-HiTekPower Ltd
Littlehampton, West Sussex
United Kingdom
Senior Design Engineer
Development of high voltage power supplies for industrial x-ray
systems from ± 50kV till ± 350kV with a large range of output powers
from bespoke customer requirements to modifications and updates to
existing product range. I am engaged in the development and use of
new technologies in the field of high voltage and dielectric insulation.
January 2010 / August 2014
COMET AG (COMET Group)
Flamatt (FR)
Switzerland
Senior Engineer
Development of high voltage power supplies for industrial x-ray
systems from ± 50kV till ± 350kV with a maximum output power of
4.5kW.
Development of the power electronics and control circuits in team.
Support to the production for trouble shooting and repairs.
I take care of the drawing up of the technical detailed lists,
the study of feasibility and of system, the planning electronic and
electrical works, and of the demanded documentation in order to
guarantee the respect of Quality System ISO 9001/2000, ISO
13485/1966 (EN46001) and of norms CE and UL.
August 2008 / December 2009
Yxlon Gmbh (COMET Group)
Hamburg
Germany
High voltage team leader
Development of high voltage power supplies for industrial x-ray
systems from ± 50kV till ± 350kV with a maximum output power of
4.5kW. Development of the power electronics and control circuits in
team. Support to the production for trouble shooting and repairs.
September 2005 / July 2008
Aem srl (now IMD Generators)
Grassobbio (Bergamo)
Italy
Lead Engineer
Responsible of the development of the new x-ray products.
My task was the design and production of new power supplies and
mono-blocks for medical and industrial applications.
I took care of the drawing up to the technical detailed lists, the studies
of feasibility and system, the planning of electronic and electrical
works, and of the demanded documentation in order to guarantee the
respect of Quality System and of norms CE and UL.
March 2004 / August 2005
PSM srl (now IMD Generators)
Grassobbio (Bergamo)
Italy
Lead Engineer
Responsible of the development of the new products.
My main duty was that to design new x-ray power supplies and mono-
blocks for mammography and ortopantomography and the relative
control and power electronics.
2. Curriculum Vitae
June 1998 / February 2004
Gilardoni Raggi X S.p.A.
Mandello del Lario (Lecco)
Italy
High voltage team leader.
My tasks were those to design new x-ray mono-blocks and power
supplie for medical and industrial applications and to organize and to
manage a work group formed by seven between engineers and
technicians engaged in the design of x-ray systems with powers from
250W till 15kW and tensions till 160kV. Beyond to the planning and its
supervision I took care of the realization of the technical
documentation from the drawing up of the technical detailed lists until
the all documentation of plans necessary in order to obtain
certifications CE and UL and the conformity to the several regulations
in whose respect the x-ray products are made.
October 1989 / May 1998
ANSALDO Ind. (now Nidec-ASI)
Milano
Italy
Design Engineer
Responsible for the development of the electronic circuits for
supervision and control of power SCR and IGBT to be employed in
AC/AC and AC/DC converters used for motor drivers and power
converters for grid's control till 200 kV like STATICVAR and HVDC
and for the furnaces in DC till 70 kA.
Involved in the development of liquid and air cooling systems for high
power SCR and IGBT..
I took part in the commissioning of HVDC and STATICVAR systems in
Italy and abroad
Applications of robots in the systems for automatic welding.
July 1987 / September 1989
FIAR S.p.A. (now Alenia)
Milano
Italy
Design Engineer
Designer PWM switching power supplies with switching frequencies
as high as 100 kHz using power MOSFET. My task consisted in the
planning and realization of prototype power supplies to be used
inside military radar systems.
November 1986 / June 1987
ITIS
Casalpusterlengo (LO)
Italy
Teacher of "Electronics and systems"
at the State Industrial Technical Institute "L. Cadorna”
SCHOLASTIC FORMATION
October 1986
University of the Studies of Pavia
Faculty of Engineering
Attainment of the Master Degree in Electronic Engineering at the
Optoelectronic department with a thesis about the development of
an optoelectronic instrumentation for the transmission of biological
data in collaboration with the Mario Negri Institute of Milan.
July 1979 Attainment of the diploma of classic maturity.
ACQUAINTANCE with LANGUAGES
English Good level of understanding of oral and written expression.
French Discreet level of understanding of oral and written expression.
Spanish Discreet level of understanding of oral and written expression.
German Basics
Software knowledge
Microsoft Office; Pspice / Orcad;
Mathcad; Autocad; Solidwork; Comsol
Knowledge as user.