Customer Bulletin 0109 ISO-C1 PolyIsocyanurate Insulation UL and FM Testing
•
0 likes•227 views
This Customer Bulletin is the first in a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Dyplast Products, LLC has announced industry-leading results regarding its ASTM E84 flame spread/smoke development tests conducted by UL and FM; and adds clarity to often misunderstood claims regarding flame/smoke properties of alternative insulations.
Report
Share
Report
Share
Download to read offline
Recommended
Perstorp - Selecting the appropriate antioxidant for PVC cable
"Selecting the appropriate antioxidant for PVC cable" - Pertorp plasticizer presentation by Anders Magnusson for the Cables 2014 conference in Cologne, Germany 2014.
Concise know how from EMKA - Enclosure/Cabinet Gasketing
This document provides information on various gasketing materials sold by EMKA, including EPDM, NBR, CR, PVC, TPE, PUR foam, and silicone. It describes the typical applications, temperature ranges, chemical resistance, and examples of profiles for each material. Additional sections cover topics like fire protection compounds, hygiene compounds, finishing of profiles, and pre-fabricated frames and rings.
Creative Commons: A functional solution through licensing
This document discusses Creative Commons licensing as a solution for copyright in the digital age. It provides context about the modernization of copyright law and the rise of the internet and digital sharing. The document then explains the four main types of Creative Commons licenses and their limitations, as well as examples of how Creative Commons licensing has been supported in case law in various countries. It concludes by providing additional resources for finding freely licensed creative works and information.
В поисках утеряной чести корпоративных сайтов или Невебстудийный подход к раз...
Большинство веб-студий делают одну и ту же ошибку - пытаются во всем угодить своему клиенту и сделать проект так, лишь бы его приняли.
При таком подходе работа строится следующим образом: клиент предполагает, как должен выглядеть его сайт, а студия угадывает, что творится в голове у клиента и ублажает его.
Итог: проекты, которые никогда не смогут помочь конечным потребителям и сразу могут быть выброшены в мусорную корзину.
В своем докладе я расскажу, как выстроить процесс работы компании совершенно по другому и начать эволюционный путь от веб-студии к агентству интернет-маркетинга, в котором «маркетинг» значит не меньше чем «интернет».
Кому будет интересен доклад:
1. Руководители отдела разработки веб-студий. Его внедрение поможет им создавать проекты без шаманства;
2. Проджект-менеджеры веб-студий, стремящиеся стать руководителями отдела разработки проектов. Знания помогут им сделать это быстрее;
3. Руководители веб-студий, попавшие в стадию стагнации и желающие найти путь к тому, чтобы продавать свои решения дороже и слышать меньше ворчания от сотрудников, уставших «ублажать» необоснованные фантазии клиентов
Incrustaciones
Este documento describe las incrustaciones dentales, que son restauraciones parciales fabricadas fuera de la boca y luego adheridas al diente, y pueden estar hechas de materiales como cerámica, composite o metal. Explica que una buena comunicación con el laboratorio dental permite mimetizar la restauración con el remanente dentario existente.
The photo’s i took
The document describes edits made to several photos for a publication. For the first photo, the background was removed and the color, hue, saturation and brightness were adjusted to give it a glossier look. The black dress was cloned over a gap to make the picture cleaner. For images on the contents page, pictures were lightened and colors were adjusted to make them look slicker. The skin color of the third picture was changed to match the theme of envy. Two edits were made to a double page spread photo by removing the background and cloning hair over areas to make the image cleaner.
Flat plan
This document appears to be a magazine layout with various articles, interviews, reviews, and advertisements about mainstream and underground music bands. The contents page lists informative articles on mainstream and underground bands, interviews with mainstream and underground bands, live band reviews of mainstream and underground bands, advertisements, and live music listings.
Recommended
Perstorp - Selecting the appropriate antioxidant for PVC cable
"Selecting the appropriate antioxidant for PVC cable" - Pertorp plasticizer presentation by Anders Magnusson for the Cables 2014 conference in Cologne, Germany 2014.
Concise know how from EMKA - Enclosure/Cabinet Gasketing
This document provides information on various gasketing materials sold by EMKA, including EPDM, NBR, CR, PVC, TPE, PUR foam, and silicone. It describes the typical applications, temperature ranges, chemical resistance, and examples of profiles for each material. Additional sections cover topics like fire protection compounds, hygiene compounds, finishing of profiles, and pre-fabricated frames and rings.
Creative Commons: A functional solution through licensing
This document discusses Creative Commons licensing as a solution for copyright in the digital age. It provides context about the modernization of copyright law and the rise of the internet and digital sharing. The document then explains the four main types of Creative Commons licenses and their limitations, as well as examples of how Creative Commons licensing has been supported in case law in various countries. It concludes by providing additional resources for finding freely licensed creative works and information.
В поисках утеряной чести корпоративных сайтов или Невебстудийный подход к раз...
Большинство веб-студий делают одну и ту же ошибку - пытаются во всем угодить своему клиенту и сделать проект так, лишь бы его приняли.
При таком подходе работа строится следующим образом: клиент предполагает, как должен выглядеть его сайт, а студия угадывает, что творится в голове у клиента и ублажает его.
Итог: проекты, которые никогда не смогут помочь конечным потребителям и сразу могут быть выброшены в мусорную корзину.
В своем докладе я расскажу, как выстроить процесс работы компании совершенно по другому и начать эволюционный путь от веб-студии к агентству интернет-маркетинга, в котором «маркетинг» значит не меньше чем «интернет».
Кому будет интересен доклад:
1. Руководители отдела разработки веб-студий. Его внедрение поможет им создавать проекты без шаманства;
2. Проджект-менеджеры веб-студий, стремящиеся стать руководителями отдела разработки проектов. Знания помогут им сделать это быстрее;
3. Руководители веб-студий, попавшие в стадию стагнации и желающие найти путь к тому, чтобы продавать свои решения дороже и слышать меньше ворчания от сотрудников, уставших «ублажать» необоснованные фантазии клиентов
Incrustaciones
Este documento describe las incrustaciones dentales, que son restauraciones parciales fabricadas fuera de la boca y luego adheridas al diente, y pueden estar hechas de materiales como cerámica, composite o metal. Explica que una buena comunicación con el laboratorio dental permite mimetizar la restauración con el remanente dentario existente.
The photo’s i took
The document describes edits made to several photos for a publication. For the first photo, the background was removed and the color, hue, saturation and brightness were adjusted to give it a glossier look. The black dress was cloned over a gap to make the picture cleaner. For images on the contents page, pictures were lightened and colors were adjusted to make them look slicker. The skin color of the third picture was changed to match the theme of envy. Two edits were made to a double page spread photo by removing the background and cloning hair over areas to make the image cleaner.
Flat plan
This document appears to be a magazine layout with various articles, interviews, reviews, and advertisements about mainstream and underground music bands. The contents page lists informative articles on mainstream and underground bands, interviews with mainstream and underground bands, live band reviews of mainstream and underground bands, advertisements, and live music listings.
Co to jest Google Apps dla edukacji?
Jestem przekonany, że w przeciągu najbliższych kilku lat narzędzia google staną się standardem w edukacji. Warto już dzisiaj zapoznać się z możliwościami tych narzędzi.
Clasificación general por foreros
The document lists the top 55 players of a game ranked by their total score. It includes each player's username, total score, and individual scores in phases 1, 2 and 3 of the game. The majority of players scored in only one phase, though some had scores across multiple phases. The player in first place, "under", had a total score of 295 points.
Plano de aula
O plano de aula introduz o handebol para alunos do 5o ano ensinando os elementos básicos do jogo através de uma atividade prática dividida em grupos. Os alunos aprenderão a passar a bola entre si para avançar até o outro lado da quadra enquanto discutem como melhorar a atividade e o que aprenderam.
Tabarca comer y dormir
El documento proporciona información sobre alojamientos, restaurantes y otros servicios disponibles en la Isla de Tabarca, incluyendo hoteles como el Casa del Gobernador, hostales como el Hostal Masim y el Hostal El Chiqui, y casas de alquiler. Lista varios restaurantes donde se puede probar la cocina local como el calamar de potera o el arroz de mero. También menciona una taberna y otros servicios como el alquiler de piraguas, souvenirs y hamacas.
The island
Studio D is hosting its first dance camp retreat called "The Island" from Friday April 5th to Sunday April 7th near the beach. The retreat is aimed at students aged 8+ and will include a jazz production showcase, exciting dance workshops in musical comedy, hip hop, and spins/tricks with professional tuition, traditional camp activities, comfortable accommodations, home-cooked meals, and Wi-Fi for $280 all-inclusive.
Customer bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
This Customer Bulletin is another in a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products and on items that affect our industry. Marketing literature for insulation products on the internet and in printed media often address the flame spread index (FSI) and smoke developed index (SDI) as measured in accordance with
ASTM E84 or comparable standards. This Customer Bulletin provides factual, clarifying information concerning ISO-C1’s FSI and SDI as well as other important points relating to the combustion properties of polyisocyanurate foam.
Customer Bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
This document summarizes the building code requirements and approved applications for polyisocyanurate foam insulation with Class I flame and smoke ratings per ASTM E84 testing. It notes that codes vary by state/location and exceptions allow Class I foam to be sprayed up to 3 1/4 inches without a thermal barrier, and to be used in freezer/cooler walls up to 10 inches thick with metal covering. Class I foam can also be used in single-story exterior walls up to 4 inches thick and multi-story walls up to 4 inches individually tested or as prefabricated panels per NFPA 285. Mechanical codes also allow Class I foam in some piping and ductwork. The specific product discussed achieved Class I ratings
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
This document compares polyisocyanurate (polyiso) insulation to extruded polystyrene (XPS) insulation. It finds that polyiso delivers higher R-values per inch, is moisture and mold resistant, and maintains its shape better than XPS especially at low temperatures. Polyiso also performs better than XPS in fire tests as it forms a protective char layer rather than melting. Additionally, polyiso has a lower global warming potential and is more resistant to construction materials than XPS. The document is aimed at providing objective information to help customers, engineers and others compare insulation products.
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
This Customer Bulletin is another in a series of white papers aimed at providing our clients,
engineers, contractors, fabricators, and friends with objective information on competitive
products. Marketing literature on the internet and in printed media address the physical and
performance characteristics of polyisocyanurate rigid foam (ISO) and extruded polystyrene
insulation (XPS). As is often the case, some literature can be misleading and/or in some cases
there may not be sufficient information to credibly compare products. This Customer Bulletin
provides factual, clarifying information which should allow for an objective comparison of
Dyplast’s ISO-C1® with the competing XPS Billet product.
Ay126
This document provides information on thermal barriers and ignition barriers for the spray polyurethane foam industry. It defines what thermal barriers and ignition barriers are, where they are required by building codes, and options for selecting them. Thermal barriers are meant to prevent involvement of foam in a fire by limiting temperature rise, while ignition barriers provide some protection but are only allowed in attics and crawlspaces. Prescriptive options and tested alternative assemblies that meet code requirements are outlined. The document aims to help specifiers choose compliant foam and barrier systems.
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
This Customer Bulletin is part of a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Marketing literature on the internet and in printed media address the physical and performance characteristics of competing polyisocyanurate rigid foam insulations fabricated from bunstock. As is often the case, some literature can be misleading and/or in some cases there may not be sufficient information to credibly compare products. This Customer Bulletin provides factual, clarifying information which should allow for an objective comparison of Dyplast’s ISO-C1® with HiTherm’s HT-300 (each 2 lb/ft3 density).
Customer Bulletin 05-15 A Comparison of ISO-C1 and HT-300 Polyisocyanurate In...
This document provides a comparison of two polyisocyanurate insulation materials, ISO-C1 and HT-300. It finds that ISO-C1 is manufactured in the US using pentane as a blowing agent, while HT-300 is manufactured outside the US likely using HCFCs. ISO-C1 has lower water vapor permeability, better dimensional stability, and independently verified physical properties compared to HT-300. The document concludes HT-300 does not fully comply with ASTM standards according to its published data.
Customer Bulletin 0515 A Comparison of ISO ISO-C1 and HT-300
This document provides a comparison of two polyisocyanurate insulation materials, ISO-C1 and HT-300. ISO-C1 is manufactured in the US using pentane blowing agent, while HT-300 is manufactured outside the US using HCFC blowing agent. Physical properties of ISO-C1 have been independently verified, while verification of HT-300 properties could not be found. ISO-C1 generally has better properties such as lower water vapor permeability, higher flame/smoke ratings, and better dimensional stability. The document concludes that while HiTherm claims HT-300 meets standards, its published data shows it does not meet all requirements of ASTM C591-13.
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
This Customer Bulletin is part of a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Marketing literature on the internet and in printed media address the physical and performance characteristics of competing polyisocyanurate rigid foam insulations fabricated from bunstock. As is often the case, some literature can be misleading and/or in some cases there may not be sufficient information to credibly compare products. This Customer Bulletin provides factual, clarifying information which should allow for an objective comparison of Dyplast’s ISO-C1® with HiTherm’s HT-300 (each 2 lb/ft3 density).
Fireflex
Fireflex is a versatile fire-resistant material that can be manufactured in thin flexible rolls and sheets from 0.04mm thick to Rigid Gasket boards up to 19mm thick. Fireflex provides highly effective passive fire protection for a broad range of applications including Construction, Mass Transport, Defence, Hazardous Area, EV and Battery Storage applications.
Executive Summary Intumescent Coatings
This document provides an overview and market analysis of the US and Western European intumescent coatings market from 2009 to 2015. It discusses key definitions, industry challenges, market drivers and restraints, revenue segmentation by region and market, and competitive landscape. The market is projected to grow from $XXX million in 2008 to $YYY million in 2015, driven primarily by increasing fire protection requirements and the potential for epoxy-based coatings. The top three companies by revenue share in 2008 were Company A, Company B, and others.
Customer Bulletin 0511 Questions You Should Ask When Selecting Mechanical Ins...
Too often the specifying and selection processes relating to mechanical insulation are jeopardized either due to confusing information or the absence of important information. “What‟s not being said” is sometimes more important than “what‟s being said”! The objective of this document is to itemize key questions that should be asked during discussions with insulant suppliers. Failure to receive a credible response on any question may be an indication that full disclosure is being withheld.
The truth about permanent safety warning labeling for lse polyolefin plastic ...
The rise in durable goods products made from low surface energy (LSE) plastics has grown exponentially. Industries such as automotive, power sports, outdoor power equipment need permanent safety/warning labeling but the problem is, the permanent labeling available isn't actually permanent.
Expanded Polystyrene-EPS-Molecules to Insulation Products & Solutions
Expanded polystyrene (EPS) has been used as an insulation material for over 60 years. It is produced by expanding polystyrene beads with steam, which causes them to expand up to 50 times their original size. EPS has beneficial properties for insulation such as high R-values, moisture resistance, and versatility. Plasti-Fab is a leading manufacturer of EPS insulation products in North America, with expertise in EPS applications for buildings and other construction projects.
NSAI Cert.PDF
This document is an Irish Agrément Board Certificate for E:ZeroTM E500 spray foam insulation. It certifies that the product meets the requirements of Irish building regulations when used as described in the certificate. The three-sentence summary is:
E:ZeroTM E500 is a spray-applied, open cell foam insulation that has been certified by the Irish Agrément Board to provide thermal insulation in walls, pitched roofs, attic floors and suspended ground floors. The foam is manufactured by PUR-Systems GmbH & Co. KG in Germany and distributed in Ireland by CPI Foam Ltd. The certificate specifies approved uses, installation methods, and confirms the insulation meets Irish standards for fire safety, weather resistance,
More Related Content
Viewers also liked
Co to jest Google Apps dla edukacji?
Jestem przekonany, że w przeciągu najbliższych kilku lat narzędzia google staną się standardem w edukacji. Warto już dzisiaj zapoznać się z możliwościami tych narzędzi.
Clasificación general por foreros
The document lists the top 55 players of a game ranked by their total score. It includes each player's username, total score, and individual scores in phases 1, 2 and 3 of the game. The majority of players scored in only one phase, though some had scores across multiple phases. The player in first place, "under", had a total score of 295 points.
Plano de aula
O plano de aula introduz o handebol para alunos do 5o ano ensinando os elementos básicos do jogo através de uma atividade prática dividida em grupos. Os alunos aprenderão a passar a bola entre si para avançar até o outro lado da quadra enquanto discutem como melhorar a atividade e o que aprenderam.
Tabarca comer y dormir
El documento proporciona información sobre alojamientos, restaurantes y otros servicios disponibles en la Isla de Tabarca, incluyendo hoteles como el Casa del Gobernador, hostales como el Hostal Masim y el Hostal El Chiqui, y casas de alquiler. Lista varios restaurantes donde se puede probar la cocina local como el calamar de potera o el arroz de mero. También menciona una taberna y otros servicios como el alquiler de piraguas, souvenirs y hamacas.
The island
Studio D is hosting its first dance camp retreat called "The Island" from Friday April 5th to Sunday April 7th near the beach. The retreat is aimed at students aged 8+ and will include a jazz production showcase, exciting dance workshops in musical comedy, hip hop, and spins/tricks with professional tuition, traditional camp activities, comfortable accommodations, home-cooked meals, and Wi-Fi for $280 all-inclusive.
Viewers also liked (7)
Similar to Customer Bulletin 0109 ISO-C1 PolyIsocyanurate Insulation UL and FM Testing
Customer bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
This Customer Bulletin is another in a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products and on items that affect our industry. Marketing literature for insulation products on the internet and in printed media often address the flame spread index (FSI) and smoke developed index (SDI) as measured in accordance with
ASTM E84 or comparable standards. This Customer Bulletin provides factual, clarifying information concerning ISO-C1’s FSI and SDI as well as other important points relating to the combustion properties of polyisocyanurate foam.
Customer Bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
This document summarizes the building code requirements and approved applications for polyisocyanurate foam insulation with Class I flame and smoke ratings per ASTM E84 testing. It notes that codes vary by state/location and exceptions allow Class I foam to be sprayed up to 3 1/4 inches without a thermal barrier, and to be used in freezer/cooler walls up to 10 inches thick with metal covering. Class I foam can also be used in single-story exterior walls up to 4 inches thick and multi-story walls up to 4 inches individually tested or as prefabricated panels per NFPA 285. Mechanical codes also allow Class I foam in some piping and ductwork. The specific product discussed achieved Class I ratings
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
This document compares polyisocyanurate (polyiso) insulation to extruded polystyrene (XPS) insulation. It finds that polyiso delivers higher R-values per inch, is moisture and mold resistant, and maintains its shape better than XPS especially at low temperatures. Polyiso also performs better than XPS in fire tests as it forms a protective char layer rather than melting. Additionally, polyiso has a lower global warming potential and is more resistant to construction materials than XPS. The document is aimed at providing objective information to help customers, engineers and others compare insulation products.
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
This Customer Bulletin is another in a series of white papers aimed at providing our clients,
engineers, contractors, fabricators, and friends with objective information on competitive
products. Marketing literature on the internet and in printed media address the physical and
performance characteristics of polyisocyanurate rigid foam (ISO) and extruded polystyrene
insulation (XPS). As is often the case, some literature can be misleading and/or in some cases
there may not be sufficient information to credibly compare products. This Customer Bulletin
provides factual, clarifying information which should allow for an objective comparison of
Dyplast’s ISO-C1® with the competing XPS Billet product.
Ay126
This document provides information on thermal barriers and ignition barriers for the spray polyurethane foam industry. It defines what thermal barriers and ignition barriers are, where they are required by building codes, and options for selecting them. Thermal barriers are meant to prevent involvement of foam in a fire by limiting temperature rise, while ignition barriers provide some protection but are only allowed in attics and crawlspaces. Prescriptive options and tested alternative assemblies that meet code requirements are outlined. The document aims to help specifiers choose compliant foam and barrier systems.
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
This Customer Bulletin is part of a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Marketing literature on the internet and in printed media address the physical and performance characteristics of competing polyisocyanurate rigid foam insulations fabricated from bunstock. As is often the case, some literature can be misleading and/or in some cases there may not be sufficient information to credibly compare products. This Customer Bulletin provides factual, clarifying information which should allow for an objective comparison of Dyplast’s ISO-C1® with HiTherm’s HT-300 (each 2 lb/ft3 density).
Customer Bulletin 05-15 A Comparison of ISO-C1 and HT-300 Polyisocyanurate In...
This document provides a comparison of two polyisocyanurate insulation materials, ISO-C1 and HT-300. It finds that ISO-C1 is manufactured in the US using pentane as a blowing agent, while HT-300 is manufactured outside the US likely using HCFCs. ISO-C1 has lower water vapor permeability, better dimensional stability, and independently verified physical properties compared to HT-300. The document concludes HT-300 does not fully comply with ASTM standards according to its published data.
Customer Bulletin 0515 A Comparison of ISO ISO-C1 and HT-300
This document provides a comparison of two polyisocyanurate insulation materials, ISO-C1 and HT-300. ISO-C1 is manufactured in the US using pentane blowing agent, while HT-300 is manufactured outside the US using HCFC blowing agent. Physical properties of ISO-C1 have been independently verified, while verification of HT-300 properties could not be found. ISO-C1 generally has better properties such as lower water vapor permeability, higher flame/smoke ratings, and better dimensional stability. The document concludes that while HiTherm claims HT-300 meets standards, its published data shows it does not meet all requirements of ASTM C591-13.
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
This Customer Bulletin is part of a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Marketing literature on the internet and in printed media address the physical and performance characteristics of competing polyisocyanurate rigid foam insulations fabricated from bunstock. As is often the case, some literature can be misleading and/or in some cases there may not be sufficient information to credibly compare products. This Customer Bulletin provides factual, clarifying information which should allow for an objective comparison of Dyplast’s ISO-C1® with HiTherm’s HT-300 (each 2 lb/ft3 density).
Fireflex
Fireflex is a versatile fire-resistant material that can be manufactured in thin flexible rolls and sheets from 0.04mm thick to Rigid Gasket boards up to 19mm thick. Fireflex provides highly effective passive fire protection for a broad range of applications including Construction, Mass Transport, Defence, Hazardous Area, EV and Battery Storage applications.
Executive Summary Intumescent Coatings
This document provides an overview and market analysis of the US and Western European intumescent coatings market from 2009 to 2015. It discusses key definitions, industry challenges, market drivers and restraints, revenue segmentation by region and market, and competitive landscape. The market is projected to grow from $XXX million in 2008 to $YYY million in 2015, driven primarily by increasing fire protection requirements and the potential for epoxy-based coatings. The top three companies by revenue share in 2008 were Company A, Company B, and others.
Customer Bulletin 0511 Questions You Should Ask When Selecting Mechanical Ins...
Too often the specifying and selection processes relating to mechanical insulation are jeopardized either due to confusing information or the absence of important information. “What‟s not being said” is sometimes more important than “what‟s being said”! The objective of this document is to itemize key questions that should be asked during discussions with insulant suppliers. Failure to receive a credible response on any question may be an indication that full disclosure is being withheld.
The truth about permanent safety warning labeling for lse polyolefin plastic ...
The rise in durable goods products made from low surface energy (LSE) plastics has grown exponentially. Industries such as automotive, power sports, outdoor power equipment need permanent safety/warning labeling but the problem is, the permanent labeling available isn't actually permanent.
Expanded Polystyrene-EPS-Molecules to Insulation Products & Solutions
Expanded polystyrene (EPS) has been used as an insulation material for over 60 years. It is produced by expanding polystyrene beads with steam, which causes them to expand up to 50 times their original size. EPS has beneficial properties for insulation such as high R-values, moisture resistance, and versatility. Plasti-Fab is a leading manufacturer of EPS insulation products in North America, with expertise in EPS applications for buildings and other construction projects.
NSAI Cert.PDF
This document is an Irish Agrément Board Certificate for E:ZeroTM E500 spray foam insulation. It certifies that the product meets the requirements of Irish building regulations when used as described in the certificate. The three-sentence summary is:
E:ZeroTM E500 is a spray-applied, open cell foam insulation that has been certified by the Irish Agrément Board to provide thermal insulation in walls, pitched roofs, attic floors and suspended ground floors. The foam is manufactured by PUR-Systems GmbH & Co. KG in Germany and distributed in Ireland by CPI Foam Ltd. The certificate specifies approved uses, installation methods, and confirms the insulation meets Irish standards for fire safety, weather resistance,
Corporate presentation
Headway Chemicals presents its range of fire protection and sealing products for the construction industry. It distributes products from NPT Italy, including one-part polyurethane sealants for joints in concrete and buildings. It also offers polyurethane foam, passive fire protection products, and intumescent fire stopping materials like sealants, mortars, coatings, and putty. Headway has a 20-year production history, fully equipped laboratories for product development and testing, and distributes globally through partnerships like the one with NPT Italy.
Adhesive 2 presentation mt
This document provides an overview of Pidilite Industries Ltd's adhesive product range for various industries. It discusses their FV Adhesive-II range which covers products for upholstery, flooring, footwear, and HVAC applications. It then summarizes specific adhesive products for upholstery, flooring, wallpaper, footwear, and insulation applications. For each segment, it highlights the available packaging and key features and benefits of flagship products.
Thermobreak Sheet - Brochure 020914 D
Thermobreak is a leading thermal insulation made of physically crosslinked polyolefin foam. It has the lowest thermal conductivity of any flexible insulation at 0.032 W/mK. Thermobreak has been proven over 20 years with installations in over 600 projects worldwide. It is manufactured using Sekisui's proprietary technology and complies with various international standards for fire, smoke, and toxic gas emissions.
Fire Protection
When specified correctly fire protection materials
preserve property and can save lives. With so many
products available and so much at stake, gaining
expert advice on choosing the right products is vital
History of Firestopping
Firestopping originated in the 1960s to contain fire and smoke. It gained widespread use in the 1970s as electrical and silicone manufacturers developed new firestopping products. Standards and codes evolved through the 1980s-2000s as product technology advanced and demand increased. Today, firestopping aims to safely allow building penetrations as defined by UL testing and approved detail systems.
Similar to Customer Bulletin 0109 ISO-C1 PolyIsocyanurate Insulation UL and FM Testing (20)
Customer bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
Customer bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
Customer Bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
Customer Bulletin 0717 ISO C1® Polyisocyanurate Insulation Flame Spread and S...
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
Customer Bulletin 0310 A Comparison of ISO-C1 Polyisocyanurate Insulation to ...
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
Customer Bulletin 05-15 A Comparison of ISO-C1 and HT-300 Polyisocyanurate In...
Customer Bulletin 05-15 A Comparison of ISO-C1 and HT-300 Polyisocyanurate In...
Customer Bulletin 0515 A Comparison of ISO ISO-C1 and HT-300
Customer Bulletin 0515 A Comparison of ISO ISO-C1 and HT-300
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
Customer Bulletin 0410 A Comparison of ISO-C1 and HT-300
Customer Bulletin 0511 Questions You Should Ask When Selecting Mechanical Ins...
Customer Bulletin 0511 Questions You Should Ask When Selecting Mechanical Ins...
The truth about permanent safety warning labeling for lse polyolefin plastic ...
The truth about permanent safety warning labeling for lse polyolefin plastic ...
Expanded Polystyrene-EPS-Molecules to Insulation Products & Solutions
Expanded Polystyrene-EPS-Molecules to Insulation Products & Solutions
More from Joe Hughes
Qwik-Guide PIR vs XPS Pipe Insulation 0518
Dyplast’s 0214 Technical Bulletin was focused primarily on examining the cost of insulation systems versus energy savings and long-term performance of polyisocyanurate (polyiso or PIR) and extruded polystyrene (XPS) insulants in lowtemperature applications such as refrigeration and chilled water applications. It’s no surprise that polyisocyanurate was the handsdown selection based purely on physical properties, cost, and demonstrated thermal efficiencies in practice.
Technical Bulletin 0418 Polyiso vs. XPS Pipe Insulation Systems
Dyplast’s 0214 Technical Bulletin was focused primarily on examining the cost of insulation systems versus energy savings and long-term performance of polyisocyanurate (polyiso or PIR) and extruded polystyrene (XPS) insulants in low-temperature applications such as refrigeration and chilled water applications. It’s no surprise that polyisocyanurate was the hands-down selection based purely on physical properties, cost, and demonstrated thermal efficiencies in practice.
QWIK GUIDE: GeoFoam 0218
Dyplast has over fifty years of development and manufacturing experience with its GeoFoam product line and applications. Dyplast GeoFoam is produced as a large expanded polystyrene (EPS) rigid foam block, typically used as a light-weight/high-strength structural replacement for soil in geo-technical projects or as structural alternatives in applications such as stadium seating and swimming pool foundations in hi-rise hotels. Just a few examples include:
LNG Industry Magazine (Commercial Quality Control The Missing Link) Jan 2017
This document introduces the concept of commercial quality control as an approach to managing risks across the lifecycle of LNG projects. It involves applying traditional quality control practices used in manufacturing to commercial activities like contracting, staffing, and project management. This helps move more impact factors to the controllable side. The top five areas of focus are ownership structure, contracts, scope and change control, people, and independent oversight. Commercial quality control emphasizes measurability, auditability and controllability in contracts from the start. It can help identify and mitigate risks to optimize returns for stakeholders.
LNG Industry Magazine (Risk Mitigation Standards) July 2016
Experience has demonstrated that insulation systems within LNG facilities are often ‘under-designed’ when compared to other mechanical systems. Decades of lessons learned from
under-designing other mechanical systems, such as piping materials, welding, compressors, relief valves, etc., have led to a keen awareness among LNG engineers regarding impacts on safety, plant reliability, process efficiency, energy loss, and
environmental compliance.
The purpose of this article is to offer a macro-level discussion
of the following:The role of standards in mitigating insulation risks. Which standards are becoming dominant for LNG insulation. Where standards must be supplemented with broader risk mitigation.
LNG Industry Magazine (Logical Thinking) Feb 2016
Dyplast Products’ new article in LNG Industry Magazine titled "Logical Thinking" is an examination of the complexities surrounding insulant performance at cryogenic temperatures.
Physical properties of a particular insulant are often measured only at ambient temperatures. This article aims to use logical thinking to examine the performance of insulants at LNG (cryogenic) temperatures.
Fortunately, standards such as ASTM and CINI increasingly require physical properties to be measured at cryogenic temperatures, so that in the future such logical extrapolations may be less necessary.
The Role of the Insulation System in Optimizing value in LNG Facilities
This document discusses optimizing value and mitigating risks in LNG facility construction. It focuses on the role of insulation systems, which have a material impact on lifecycle cost, performance, and risk. Key risks include construction delays, operational inefficiencies, outages, and lack of resilience. While the capital cost of insulation is relatively small, it is important and can impact these risks. Insulant selection requires due diligence to understand impacts on the insulation system design, costs, risks, and labor. Lifecycle performance and risk depend on the insulant's thermal conductivity at various temperatures, water vapor transmission, water absorption, and other properties. Third party testing and approvals are important to determine factual information.
2015 RETA's Exhibition Conference
Dyplast Products will be attending the RETA annual Conference September 29-October 2 at the Wisconsin Center in Milwaukee, WI.
2015 SWICA 57th Annual Conference
Dyplast Products attending 2015 SWICA 57th Annual Conference June 2-7, 2015
Innisbrook Golf Resort, Palm Harbor, Florida
2015 Polyurethanes Technical Conference
Dyplast Products is proud to announce we will be attending the 2015 Polyurethanes Technical Conference October 5-7, 2015 at the Gaylord Palms Resort and Convention Center in Kissimmee, Florida.
2015 ESICA Conference
May 6-8 2015
Baltimore, Maryland
Dyplast will be attending the Eastern States Insulation Contractors Association Conference at the Four Seasons Hotel in Baltimore Harbor, Maryland.
ESICA represents both small and large mechanical, commercial, industrial and asbestos abatement contractors as well as various suppliers and distributors of products and services to the industry.
Dyplast has been supporting ESICA over many years, and is eager to again be part of this valuable Conference.
Polyisocyanurate Environmental Sustainability
The article discusses how companies can incorporate sustainability into their business strategies to gain competitive advantages. Companies that focus on sustainability through practices like reducing waste and carbon emissions see benefits like increased profits, innovation, and brand loyalty. Sustainability has moved from a niche issue to a mainstream business priority as customers and investors increasingly demand environmentally and socially responsible practices from companies.
2015 SWICA EXPO
SWICAs EXPO 2015 has expanded and Dyplast will be exhibiting as one of 55 other companies with a table top display featuring Dyplast’s ISO-C1® family of products in the exhibit hall. SWICA Ninth Industrial Insulation Craft Competition will also be held at the EXPO and will have two insulators per model and have refined the removable blanket competition with single or dual optional competitors and added a commercial competition. This is an expensive and timely event that the Craft Education Committee has spent endless hours preparing exams, building models and setting standards long before the actual execution of such an event. The Expo and competition turns out virtually everyone in the industrial insulation industry. This is an opportunity to show support and help the Education Committee set new education and safety standards for our industry.
We look forward to seeing you in this one-day educational and information packed exposition, white papers and craft competitions.
11:00 AM – 6:00 PM Tuesday, February 3, 2015
Marriott Westchase Houston, TX
Be sure to drop by our booth #38 in the exhibit hall and discuss our product range with our staff!
Technical Bulletin 0714 Elastomeric insulation versus polyisocyanurate in low...
PURPOSE
Several of Dyplast’s prior Technical Bulletins have provided in-depth comparisons of various insulants, including polyisocyanurate (polyiso or PIR), polyurethane (PUR), phenolic, polystyrene (expanded EPS and extruded XPS), cellular glass, and fiberglass - - as well as less-than-comprehensive comparisons with elastomeric and aerogel. Now with somewhat more information becoming available from elastomeric manufacturers and the aggressive marketing from elastomeric suppliers for colder applications it is appropriate to dedicate a Technical Bulletin to elastomeric insulants as compared to polyisocyanurate - - and to a much lesser extent phenolic, and cellular glass.
Technical Bulletin 0213 Polyisocyanurate vs. Cellular Glass Insulation
This Technical Bulletin is another in our series of white papers aimed at providing our clients, engineers, specifiers, contractors, fabricators, and friends with objective information on our products and those of our competitors. This Bulletin focuses on a comparison of the physical properties of closed cell2 polyisocyanurate3 (polyiso or PIR) rigid foam insulation products with those of cellular glass insulation products for demanding below-ambient applications such as cryogenic, refrigerant, and chilled water where energy efficiency, moisture intrusion, and condensation are issues.
Customer Bulletin 0610 Polyisocyanurate vs. Cellular Glass Insulation
This Customer Bulletin is another in our series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on our products and those of our competitors. This Bulletin focuses on a comparison of the physical properties of closed cell polyisocyanurate (PIR or polyiso) rigid foam insulation with those of cellular glass insulation for below ambient applications such as chilled water through cryogenic application where moisture intrusion or condensation can be an issue.
Customer Bulletin 0510 Polyisocyanurate vs Polyurethane Insulation
This document compares polyisocyanurate (PIR) insulation to polyurethane (PUR) insulation. PIR has a higher index formulation which results in a cyclical ring structure that gives it advantages over PUR such as higher stability at high temperatures, better flame resistance without additional flame retardants, greater resistance to water and solvents, and improved dimensional stability. The document is intended to help customers better understand the differences between PIR and PUR insulation alternatives.
Technical Bulletin 1128A Mechanical Insulation In Typical Refrigeration Appli...
As operating temperatures of mechanical equipment and piping systems drop, increased diligence must be exercised to optimize the insulation system’s performance and mitigate risks of future deterioration. When specifying and installing an insulation system for pipes or equipment operating at refrigerant temperatures (e.g. -70°F to 32°F) cutting corners or rationalizing compromises is imprudent since the operating costs and risks far outweigh any reduced capital costs; and it is important to note that the best systems are typically not the most expensive systems.
Case Study: Philadelphia Mail Processing and Distribution
Architectural Insulating Panel Systems utilize
lightweight, insulating foam cores with steel or
aluminum faces integrally bonded to each side.
Architectural Insulating Panels form a high-strength
structural building unit for walls, ceilings, or floors
that can be readily attached to a standard steel
frame construction grid. These composite building
units can be designed to meet the most demanding
specifications for strength, flexibility, and thermal
control (up to R48) - - while providing a broad array
of architectural colors and textures.
Cryogenic, Refrigernant, Chilled Water Insulation
This document provides information on insulation products for cryogenic, refrigerant, or chilled water systems, including ISO-C1 Class 1 polyiso insulation, DyTherm Phenolic insulation rated at less than 25/50 flame spread/smoke developed, higher density pipe saddles, and DyPerm zero-perm vapor barriers. It also lists contact information for Dyplast Products.
More from Joe Hughes (20)
Technical Bulletin 0418 Polyiso vs. XPS Pipe Insulation Systems
Technical Bulletin 0418 Polyiso vs. XPS Pipe Insulation Systems
LNG Industry Magazine (Commercial Quality Control The Missing Link) Jan 2017
LNG Industry Magazine (Commercial Quality Control The Missing Link) Jan 2017
LNG Industry Magazine (Risk Mitigation Standards) July 2016
LNG Industry Magazine (Risk Mitigation Standards) July 2016
The Role of the Insulation System in Optimizing value in LNG Facilities
The Role of the Insulation System in Optimizing value in LNG Facilities
Technical Bulletin 0714 Elastomeric insulation versus polyisocyanurate in low...
Technical Bulletin 0714 Elastomeric insulation versus polyisocyanurate in low...
Technical Bulletin 0213 Polyisocyanurate vs. Cellular Glass Insulation
Technical Bulletin 0213 Polyisocyanurate vs. Cellular Glass Insulation
Customer Bulletin 0610 Polyisocyanurate vs. Cellular Glass Insulation
Customer Bulletin 0610 Polyisocyanurate vs. Cellular Glass Insulation
Customer Bulletin 0510 Polyisocyanurate vs Polyurethane Insulation
Customer Bulletin 0510 Polyisocyanurate vs Polyurethane Insulation
Technical Bulletin 1128A Mechanical Insulation In Typical Refrigeration Appli...
Technical Bulletin 1128A Mechanical Insulation In Typical Refrigeration Appli...
Case Study: Philadelphia Mail Processing and Distribution
Case Study: Philadelphia Mail Processing and Distribution
Recently uploaded
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
ScyllaDB monitoring provides a lot of useful information. But sometimes it’s not easy to find the root of the problem if something is wrong or even estimate the remaining capacity by the load on the cluster. This talk shares our team's practical tips on: 1) How to find the root of the problem by metrics if ScyllaDB is slow 2) How to interpret the load and plan capacity for the future 3) Compaction strategies and how to choose the right one 4) Important metrics which aren’t available in the default monitoring setup.
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Discover how AI is transforming the workplace and learn strategies for reskilling and upskilling employees to stay ahead. This comprehensive guide covers the impact of AI on jobs, essential skills for the future, and successful case studies from industry leaders. Embrace AI-driven changes, foster continuous learning, and build a future-ready workforce.
Read More - https://bit.ly/3VKly70
Session 1 - Intro to Robotic Process Automation.pdf
👉 Check out our full 'Africa Series - Automation Student Developers (EN)' page to register for the full program:
https://bit.ly/Automation_Student_Kickstart
In this session, we shall introduce you to the world of automation, the UiPath Platform, and guide you on how to install and setup UiPath Studio on your Windows PC.
📕 Detailed agenda:
What is RPA? Benefits of RPA?
RPA Applications
The UiPath End-to-End Automation Platform
UiPath Studio CE Installation and Setup
💻 Extra training through UiPath Academy:
Introduction to Automation
UiPath Business Automation Platform
Explore automation development with UiPath Studio
👉 Register here for our upcoming Session 2 on June 20: Introduction to UiPath Studio Fundamentals: https://community.uipath.com/events/details/uipath-lagos-presents-session-2-introduction-to-uipath-studio-fundamentals/
Containers & AI - Beauty and the Beast!?!
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Keywords: AI, Containeres, Kubernetes, Cloud Native
Event Link: https://meine.doag.org/events/cloudland/2024/agenda/#agendaId.4211
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation Functions to Prevent Interaction with Malicious QR Codes.
Aim of the Study: The goal of this research was to develop a robust hybrid approach for identifying malicious and insecure URLs derived from QR codes, ensuring safe interactions.
This is achieved through:
Machine Learning Model: Predicts the likelihood of a URL being malicious.
Security Validation Functions: Ensures the derived URL has a valid certificate and proper URL format.
This innovative blend of technology aims to enhance cybersecurity measures and protect users from potential threats hidden within QR codes 🖥 🔒
This study was my first introduction to using ML which has shown me the immense potential of ML in creating more secure digital environments!
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
Must Know Postgres Extension for DBA and Developer during Migration
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
A Deep Dive into ScyllaDB's Architecture
This talk will cover ScyllaDB Architecture from the cluster-level view and zoom in on data distribution and internal node architecture. In the process, we will learn the secret sauce used to get ScyllaDB's high availability and superior performance. We will also touch on the upcoming changes to ScyllaDB architecture, moving to strongly consistent metadata and tablets.
Recently uploaded (20)
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
Getting the Most Out of ScyllaDB Monitoring: ShareChat's Tips
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
AI in the Workplace Reskilling, Upskilling, and Future Work.pptx
Session 1 - Intro to Robotic Process Automation.pdf
Session 1 - Intro to Robotic Process Automation.pdf
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
Must Know Postgres Extension for DBA and Developer during Migration
Must Know Postgres Extension for DBA and Developer during Migration
Customer Bulletin 0109 ISO-C1 PolyIsocyanurate Insulation UL and FM Testing
- 1. CUSTOMER BULLETIN 0109 ISO-C1® Polyisocyanurate Insulation UL and FM Testing PURPOSE This Customer Bulletin is the first in a series of white papers aimed at providing our clients, engineers, contractors, fabricators, and friends with objective information on competitive products. Dyplast Products, LLC has announced industry-leading results regarding its ASTM E84 flame spread/smoke development tests conducted by UL and FM; and adds clarity to often misunderstood claims regarding flame/smoke properties of alternative insulations. SUMMARY OF RESULTS • ISO-C1/ 2.0 is the only two pound density polyisocyanurate bunstock foam that has both UL Listings and FM Approvals for Class 1 flame spread and smoke development1. UL and FM are two of the most respected testing agencies in the world, and a certification by either is challenging. To maintain our certifications with the testing agencies, Dyplast Products is required to undergo on-site audits up to 4 times per year; • ISO-C1/2.0 has obtained the following independently verified test results2: o an E-84 rating at 1 inch thickness of 20/55 (FM) o at 4 inches thick² a 25/130 measured by FM¹, and o at 4 inch thickness a 25/195 as measured by UL; • No other US polyisocyanurate foam manufacturer has achieved a Class 1 at either UL or FM, and as far as we are aware no other US polyisocyanurate foam manufacturer has obtained an official Class I certification at any independent ASTM E 84 testing facility; • Because the E-84 test results can vary from test to test, all certified listings or approvals specify that the average should be based on three tests. For example when Dyplast burned its ISO-C1/2.0 at 1 inch with FM the individual test results varied from 15 to 20 for flame spread and from 45 to 75 for smoke; 1 DISCLAIMER -This numerical flame spread data is not intended to reflect hazards presented by this or any other material under actual fire conditions. 2 Actual UL and FM listings of Dyplast’s products. Customer Bulletin 01-09 January 2009
- 2. • Two other significant factors influencing the smoke ratings are the foam thickness and the foam density since smoke levels are proportional to the mass of foam being tested. Thus it is incorrect to suggest that one Class 1 foam is materially better than another product when the tests were performed on foams of a different thickness. Dyplast believes that ISO-C1/2.0 represents leading edge technology and offers the most complete set of properties of any polyisocyanurate foam on the market; • Other polyisocyanurate insulation manufacturers or suppliers may claim better flame and smoke spread results for "systems", which may include aluminum facers or metal laminates; customers should request flame/smoke data on the polyiso foams without laminates in order to credibly assess alternative insulation. For information on Dyplast Products or additional technical data on this product, visit www.dyplastproducts.com. Customer Bulletin 01-09 January 2009