Crash cushion SMA City

•Download as PPTX, PDF•

2 likes•714 views

This short presentation explains the importance of installing crash cushions on the urban roads. SMA City is the right device to protect fixed obstacles like poles, pillars, trees, and so on from vehicle impacts.

Engineering

SMA City
The most compact solution for
the protection of fixed obstacles
in Urban Areas!
Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.

The Crash Cushion designed to protect fixed
obstacles from impacts at 50 km/h.
SMA City
Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
1

Copyright © 2014, Industry A.M.S. srl. All
Rights Reserved.
Exemples of fixed obstacles:
- Posts - Trees
- Pillars - Cusps
2

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
Other fixed obstacles:
- Concrete Kerb
- Works of Art
- Pedestrian Areas
- Fences
- Building edges
- Tunnel entrances
- New Jersey barriers
- Temporary barriers
- Pillars
3

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
Road Accident Statistics
3.543 Accidents
171 Death
4.496 Injuries
The spill or heeling of the vehicle represents the second type of accident in
single vehicles (9.2% of the total accidents).
The impact against fixed obstacles belongs to this kind of accident.
The front-side impact is the case that occurs most frequently
(23% of cases).
Impact against
fixed obstacle
17.098 Accidents
724 Death
21.396 Injuries
Spill or heeling
Data ACI –ISTAT 2012
4

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
The installation of the restraint systems is mandatory when the safety
distance between the fixed obstacle and the outer edge of the roadway is
not respected.
In this case the distance between the
fixed obstacle and the carriageway is
less than 1 meter.
5
Safety distance

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
The pictures below show the necessity of installation of a VRS in Urban Areas
The installation of VRS is a must!
6
In all these cases the distance between the fixed obstacle and the carriageway is so small
that a specific VRS becomes mandatory.

Copyright © 2014, Industry A.M.S. srl. All
Rights Reserved.
SMA City: The solution
The Crash Cushion specifically
designed by Industry A.M.S. to
protect fixed obstacles within the
Urban Areas!
The performances of this system
allow to protect the passengers
from an impact until 50 km/h.
7

Copyright © 2014, Industry A.M.S. srl. All
Rights Reserved.
SMA City - Features
Three main features of SMA City:
• Extremely reduced lenght
• Completely made of steel
• 80% reusable
8

740 mm
900mm
Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
The reduced lenght of the system
allows the installation also in
places where the space is limited.
This is why SMA City can be
installed everywhere in the centre
of the city for example in front of
light poles, trees, pillars or
roundabouts.
Ultra compact sizes
9

10
Right protection of the obstacles
OBSTACLE
Frontal view Top viewLateral view
SMA City can protect a fixed obstacle in order to avoid a fatal impact
No distance from the obstacle is required !
Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.

11
Example of installation of SMA City
Below you can see the pictures of SMA City installed on the SS 7 bis in the city Center of
Casalnuovo di Napoli. The device has been installed in front of an obstacle which has been
impacted many times causing serious injuries to the passengers.
Front view Rear viewLateral view
Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
Structure completely made of steel
Steel has the following advantages:
- respects the eco-sustainability criteria;
- is recyclable;
- resists to temperatures until + 80° and -
20° degrees;
- does not release debris after an impact.
12

The absorption of the energy
The kinetic energy coming from the impact is gradually absorbed by the
system in order to avoid serious injuries for the occupants of the vehicle.
Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved. 13

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
After the impact the cells can be replaced and the system can be reused.
80% reusability
The absorbing cells are the perfect system for the right absorption of
the energy during an impact.
14
Before the impact After the impact

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
For further information give a look at our website:
www.smaroadsafety.com
Follow us on:
- Facebook
https://www.facebook.com/SMARoadSafety
- Twitter
https://twitter.com/SMARoadSafety
- Linkedin
https://www.linkedin.com/company/SMARoadSafety
15

Copyright © 2014, Industry A.M.S. srl.
All Rights Reserved.
Thank you for your attention!
Industry A.M.S. SRL
Via Dante Giacosa
Zona ASI sud
Marcianise (CE)
Tel: +39 0823821560
Email: info@amssrl.com
16

The document describes a proposed system called "Spike Warner" that aims to help pedestrians safely cross the road. It uses spikes in the ground that rise as a warning to vehicles parked over the limit on zebra crossings. If vehicles do not move back within the limit, their tires will be punctured by the spikes. The system is accessed by pedestrians using sensors and will automatically activate the spikes when the traffic signal turns red, allowing pedestrians to cross more easily.

The Operation O Heavy Equipment++Including+Large+Trucks

kangaro10a

KANAT UP!

cumakanat

KANAT UP has developed an innovative underground parking station system that is fully automatic and computer controlled. The system, called "Underground Car Parks under Streets and Pedestrian Areas", is installed in concrete silos and can accommodate up to 1144 vehicles across 12 levels. It offers a versatile and cost-effective solution to parking challenges while improving safety, aesthetics, and the environment by eliminating emissions and reducing crime compared to above-ground parking structures. The system is well-suited for developments like residential buildings, medical facilities, offices, universities, hotels, and restaurants.

easyLive parking safety mirrors in Kenya

easyLive Systems Ltd

EasyLive offers convex safety mirrors that provide a simple and affordable solution to eliminate blind spots and reduce accidents in parking areas. The durable yet lightweight mirrors have a 180 degree field of view without needing wiring or complex setup. They allow drivers to see around corners and avoid collisions in parking lots by eliminating blind spots, reducing customer dissatisfaction and increasing profits for businesses. The mirrors are available in 24 or 18 inch diameters and installation only requires brackets, screws and 20 minutes, providing an easy way to make parking areas safer.

project profile

Ohm Ashwin Ashwin

The document proposes adding airbags to motorcycles to improve rider safety. It notes that 45% of two-wheeler accidents result in death, compared to car accidents where airbags help protect occupants. The proposed design would place an airbag on the fuel tank that deploys upon frontal impacts, cushioning the rider. A mechanical linkage connected to the front shock absorber would detect impacts and trigger gas generation to rapidly inflate the airbag between the rider and handlebars. Side impacts could also potentially be addressed by linkages that deploy side wheels for stability. The goal is to provide two-wheeler riders similar protective benefits as car airbags.

Telangana innovation

SyedTaha32

The document describes a self-balancing electric scooter called Wanderway. It works on battery power and uses an inverted pendulum principle and motors to balance itself as it moves forward or backward. Wanderway is proposed as a solution for indoor patrolling of companies, colleges, and malls to help security reach destinations more quickly. It could also help pedestrians and older faculty cover small areas on campuses more easily. Its applications include patrolling, indoor/outdoor navigation in airports, industries, universities and more.

Cross section of road and sight distance

Sarvagya Tripathi

1) The document discusses various cross-sectional elements of road design including pavement surface characteristics like friction, unevenness, drainage, and light reflection. It also discusses camber, carriageway width, and types of kerbs and shoulders. 2) It describes different types of sight distances required for road design like stopping sight distance, intermediate sight distance, overtaking sight distance, and headlight sight distance. 3) The document provides formulas to calculate minimum stopping sight distance and overtaking sight distance based on factors like vehicle speed, braking capability, gradient, and required safety spacing between vehicles.

The document describes an automatic pneumatic bumper system for vehicles. The system uses an IR sensor to detect obstacles in front of the vehicle. When an obstacle is detected, the IR sensor sends a signal to activate a pneumatic cylinder and solenoid valve. This causes the pneumatic bumper to extend out and protect the vehicle from damage on impact. It also cuts power to the vehicle's motor, engaging the brakes to stop the vehicle and prevent an accident. The system aims to reduce accidents by automatically detecting obstacles and activating braking and protective measures.

IRJET-Anti-Lock Braking System with Hydraulic Brake Assist for Emergency Braking

IRJET Journal

This document presents a conceptual design for an anti-lock braking system with hydraulic brake assist for emergency braking. The system aims to provide extra braking force with minimal driver effort during emergency situations. It works by using an ABS system to prevent wheel lockup under heavy braking while incorporating an emergency brake assist function to further increase brake pressure as needed. The design is intended to shorten braking distances and improve vehicle control and safety during emergency stops.

Accident preventing system with the help of pneumatic bumper protection

IRJET Journal

1. The document describes a system to prevent vehicle accidents using a pneumatic bumper protection. 2. An IR sensor detects obstacles in front of the vehicle and activates a solenoid valve to extend the pneumatic bumper. It also cuts power to the motor to engage the brakes. 3. The system aims to reduce vehicle and human damage from accidents by providing an automatic response when obstacles are detected to extend the bumper and brake the vehicle.

Creative journey

Mitchell Frick

The document discusses impact attenuators for solar sports cars. It describes how impact attenuators absorb kinetic energy during collisions to distribute force evenly and reduce passenger deceleration. Effective attenuators are needed at speeds over 15 km/h to protect pedestrians and over 40 km/h to protect occupants. Design ideas discussed include honeycomb structures, explosives, and different materials like foam and aluminum. Testing attenuators is difficult as it destroys the design. The document considers positioning of attenuators to protect the passenger safety cell. It notes the design process is still deciding on materials while researching ideas and space constraints.

IRJET- Design of Automatic Garbage Collecting Vehicle

IRJET Journal

This document describes the design of an automatic garbage collecting vehicle. Some key points: - The vehicle is battery-powered and three-wheeled, with a garbage container as a tail. It uses a mechanical arm with actuators to lift and dump garbage bins into the container. - The arm has three degrees of freedom and a gripper to pick up bins. It is placed on the right side of the vehicle for easy operation by a single worker. - Components like the chassis, wheel hub, axle, and arm are modeled and analyzed for strength using CREO and ANSYS software. The vehicle is designed to be lightweight, low-maintenance and reduce pollution compared to traditional garbage trucks.

automatic braking system and brake actuation before collison

ashutosh singh

In this project the pneumatic bumper and brake is used to protect the man and vehicle. This system is only activated when any obstacle comes in front of vehicle, the obstacle is sensed by sensor and it gives the signal to the control unit and due to this bumper system and braking system activated. Bumper is energized by compressor and it compressed the air and send it to the pneumatic piston. This system is used in any type of light vehicles.

IRJET- Research on Designing of Automatic Reverse Wheel Locking Mechanism

IRJET Journal

The document describes a proposed design for an automatic reverse wheel locking mechanism to prevent vehicles from moving in reverse on slopes. The mechanism uses a ratchet and pawl system engaged by a DC motor activated by an inclinometer when the vehicle reaches a threshold angle. Key components are analyzed and calculations are shown for the ratchet, pawl, stresses, and dimensions to ensure safety. Finite element analysis was also conducted. The design aims to increase safety by preventing accidents caused by unexpected reverse motion on hills and protect vehicles, pedestrians and property.

Pedestrian head impact analysis

IAEME Publication

VX - ARS

Paul Lenin

The Access Rail System is designed for use as an adjustable anchorage point for suspension/rope access for external and internal maintenance of buildings. It provides flexibility of movement at height while being lightweight and having minimal visual impact. The system comes in 27mm and 32mm sizes and can be installed on various surfaces like walls, ceilings, glass, and steel. It offers benefits over traditional cradles like lower operational costs, faster maintenance times, and greater lifting capacity. The system is certified under European safety standards and comes with a 10-year warranty. Case studies demonstrate its use for tasks like bridge maintenance, atrium cleaning, and overhead crane access.

IRJET- Designing and Fabrication of Crash Barrier

IRJET Journal

The document describes the design and fabrication of a crash barrier prototype. It aims to provide safety and security by blocking access in emergency situations like an unauthorized speeding vehicle entering a protected area. The crash barrier consists of a metal frame, aluminum plate, gears, shafts, bearings, and a motor. It is designed using SOLIDWORKS and fabricated with high reliability and low maintenance. Calculations are shown for determining the required speed of the main shaft to lift the barrier fast enough to stop an unauthorized vehicle traveling at 100 kmph within the available time before impact. A 1HP motor coupled with a two-stage gear reduction system is selected to provide the necessary speed reduction to meet the calculated requirement.

15.1.1. psa tapes for automobile

SHRIKANT ATHAVALE

IRJET- Manufacturing of Automatic Pneumatic Bumper to Prevent Car Damage

IRJET Journal

The document describes the design and development of an automatic pneumatic bumper system to prevent car damage. The system uses infrared sensors to detect obstacles within 4 feet of the vehicle when traveling over 40-50 km/hr. When an obstacle is detected, a control signal activates the pneumatic bumper system to protect the vehicle and its occupants. The system aims to automate braking and extend the bumper in the event of a collision to minimize damage compared to traditional rigid bumpers. It was developed by students at JSPM Institute of Narhe Technical Campus to provide pre-crash safety and reduce the need for internal airbags through external vehicle protection.

Km08 pneumatic automatic bumper (wecompress)

1000kv technologies

Mechanical engineering project topics for final year, 1000KV Technologies, Live projects 1000kv technologies, EEE project list, mechatronics projects, live projects ameerpet, live projects near me, live projects institutes Hyderabad, mechanical projects hyderabad, 1000KV Technologies Live projects 9030844877, 9030844866 Educational consultant in Hyderabad, Telangana Address: #A2, Eureka court complex, 2nd floor, kallu compound road, 2nd floor, A2 flat, image hospital near, Ameerpet, Hyderabad, Telangana 500016

Ampro Testing Machines

TradeIndia, B2B, B2C, at A-86 Okhla - 2 New Delhi, India

Презентация компании «Виброшторм+»

CHAOS - Digital Design Studio

Презентация уникального продукта компании «Vibrostorm+» - высокоэффективная виброизолирующая и шумопоглощающая мастика. Для данного проекта мы создали 3D модель самого материала и экстерьерные сцены ее применения. #3Dмоделирование #Презентации #Технологии #Украина Время реализации: 20 дней

Virtual digital retarders system

Alexander Decker

This document describes a digital vehicle speed control system using GPS. The system monitors a vehicle's speed and position via GPS and automatically applies the brakes when entering pre-programmed "virtual retarder" zones to reduce speed. When a zone is detected, the GPS sends a signal to a PIC controller which activates a servo motor to press the brake pedal. Sensors and displays also notify the driver. The system aims to reduce accidents by enforcing speed limits without using physical road bumps or police patrols. Test results showed the system could accurately decelerate a vehicle in a zone from its current speed. The digital approach provides wide coverage, easy installation in vehicles, and removes issues of sudden braking caused by traditional road

Design and Manufacturing of Automobile Vehicle Safety with Pneumatic Bumper

Shaikh Parvez

Design and Manufacturing of Automobile Vehicle Safety with Pneumatic Bumper - In the design of an automobile, a most important task is to minimize the occurrence and consequences of automobile accidents. Automotive safety can be improved by "active" as well as "passive" measures. Active safety refers to technology which assists in the prevention of a crash. Passive safety includes all components of the vehicle that help to reduce the aggressiveness of the crash event. Crash protection priorities vary with the speed of the car when crash occurs.

Alu Bender - A new and revolutionary process of composite panels for Visual ...

Casadei Industria

Whereas at Casadei Industria we seriously take into consideration panel edging as witnessed with 20 years of business and over 20,000 machines produced for the woodworking industry. Moreover, we believe to be the right "answer" to Visual Communication panel processing requests. Our best answer is the Alu Bender Photo, the automatic edgebander for Visual Communication panels: take a look at it here.

(Revised) Safety and Enviromental Impact Reduction Through Equipment Design

Steve Lehmer - EMS

The document discusses various ways that Alpine has improved equipment safety over time, including designing self-clearing running boards, fold-out access steps, safer tractor deck stairs, and improved indirect heater monitoring systems. It provides examples of evaluating historical failures and seeking input from operators and mechanics to incorporate ergonomics and hazard mitigation into new equipment designs and modifications.

20160706 Automotive SYS: "Evolving Needs for Software Systems - Demonstrated"

Alexander Much

spirit beverages ppt without graphics.pptx

Madan Karki

Computational Engineering IITH Presentation

co23btech11018

Similar to Crash cushion SMA City

Automatic pneumatic bumper

IRJET Journal

IRJET-Anti-Lock Braking System with Hydraulic Brake Assist for Emergency Braking

IRJET Journal

Accident preventing system with the help of pneumatic bumper protection

IRJET Journal

Creative journey

Mitchell Frick

IRJET- Design of Automatic Garbage Collecting Vehicle

IRJET Journal

automatic braking system and brake actuation before collison

ashutosh singh

IRJET- Research on Designing of Automatic Reverse Wheel Locking Mechanism

IRJET Journal

Pedestrian head impact analysis

IAEME Publication

VX - ARS

Paul Lenin

IRJET- Designing and Fabrication of Crash Barrier

IRJET Journal

15.1.1. psa tapes for automobile

SHRIKANT ATHAVALE

IRJET- Manufacturing of Automatic Pneumatic Bumper to Prevent Car Damage

IRJET Journal

Km08 pneumatic automatic bumper (wecompress)

1000kv technologies

Ampro Testing Machines

TradeIndia, B2B, B2C, at A-86 Okhla - 2 New Delhi, India

Презентация компании «Виброшторм+»

CHAOS - Digital Design Studio

Virtual digital retarders system

Alexander Decker

Design and Manufacturing of Automobile Vehicle Safety with Pneumatic Bumper

Shaikh Parvez

Alu Bender - A new and revolutionary process of composite panels for Visual ...

Casadei Industria

(Revised) Safety and Enviromental Impact Reduction Through Equipment Design

Steve Lehmer - EMS

20160706 Automotive SYS: "Evolving Needs for Software Systems - Demonstrated"

Alexander Much

Similar to Crash cushion SMA City (20)

Automatic pneumatic bumper

IRJET-Anti-Lock Braking System with Hydraulic Brake Assist for Emergency Braking

Accident preventing system with the help of pneumatic bumper protection

Creative journey

IRJET- Design of Automatic Garbage Collecting Vehicle

automatic braking system and brake actuation before collison

IRJET- Research on Designing of Automatic Reverse Wheel Locking Mechanism

Pedestrian head impact analysis

VX - ARS

IRJET- Designing and Fabrication of Crash Barrier

15.1.1. psa tapes for automobile

IRJET- Manufacturing of Automatic Pneumatic Bumper to Prevent Car Damage

Km08 pneumatic automatic bumper (wecompress)

Ampro Testing Machines

Презентация компании «Виброшторм+»

Virtual digital retarders system

Design and Manufacturing of Automobile Vehicle Safety with Pneumatic Bumper

Alu Bender - A new and revolutionary process of composite panels for Visual ...

(Revised) Safety and Enviromental Impact Reduction Through Equipment Design

20160706 Automotive SYS: "Evolving Needs for Software Systems - Demonstrated"

Recently uploaded

spirit beverages ppt without graphics.pptx

Madan Karki

Computational Engineering IITH Presentation

co23btech11018

The Python for beginners. This is an advance computer language.

sachin chaurasia

john krisinger-the science and history of the alcoholic beverage.pptx

Madan Karki

ISPM 15 Heat Treated Wood Stamps and why your shipping must have one

Las Vegas Warehouse

LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant

Anant Corporation

Comparative analysis between traditional aquaponics and reconstructed aquapon...

bijceesjournal

The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.

Software Quality Assurance-se412-v11.ppt

TaghreedAltamimi

Transformers design and coooling methods

Roger Rozario

原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样

ydzowc

原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。本公司拥有海外各大学样板无数，能完美还原。 1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011 【主营项目】一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！二.真实使馆公证(即留学回国人员证明,不成功不收费) 三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度) 如果您处于以下几种情况： ◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】 ◇面对父母的压力，希望尽快拿到； ◇不清楚认证流程以及材料该如何准备； ◇回国时间很长，忘记办理； ◇回国马上就要找工作，办给用人单位看； ◇企事业单位必须要求办理的 ◇需要报考公务员、购买免税车、落转户口 ◇申请留学生创业基金留信网认证的作用: 1:该专业认证可证明留学生真实身份 2:同时对留学生所学专业登记给予评定 3:国家专业人才认证中心颁发入库证书 4:这个认证书并且可以归档倒地方 5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息 6:个人职称评审加20分 7:个人信誉贷款加10分 8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才

Curve Fitting in Numerical Methods Regression

Nada Hikmah

Generative AI leverages algorithms to create various forms of content

Hitesh Mohapatra

Null Bangalore | Pentesters Approach to AWS IAM

Divyanshu

#Abstract: - Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices. - Gain actionable insights into AWS IAM policies and roles, using hands on approach. #Prerequisites: - Basic understanding of AWS services and architecture - Familiarity with cloud security concepts - Experience using the AWS Management Console or AWS CLI. - For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/) # Scenario Covered: - Basics of IAM in AWS - Implementing IAM Policies with Least Privilege to Manage S3 Bucket - Objective: Create an S3 bucket with least privilege IAM policy and validate access. - Steps: - Create S3 bucket. - Attach least privilege policy to IAM user. - Validate access. - Exploiting IAM PassRole Misconfiguration -Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources. - Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access. - Steps: - Allow user to pass IAM role to EC2. - Exploit misconfiguration for unauthorized access. - Access sensitive resources. - Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role - An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role. - Objective: Show how overly permissive IAM roles can lead to privilege escalation. - Steps: - Create role with administrative privileges. - Allow user to assume the role. - Perform administrative actions. - Differentiation between PassRole vs AssumeRole Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)

CEC 352 - SATELLITE COMMUNICATION UNIT 1

PKavitha10

2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf

Yasser Mahgoub

Engineering Drawings Lecture Detail Drawings 2014.pdf

abbyasa1014

Software Engineering and Project Management - Introduction, Modeling Concepts...

Prakhyath Rai

Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.

132/33KV substation case study Presentation

kandramariana6

IEEE Aerospace and Electronic Systems Society as a Graduate Student Member

VICTOR MAESTRE RAMIREZ

CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS

RamonNovais6

Recently uploaded (20)

spirit beverages ppt without graphics.pptx

Computational Engineering IITH Presentation

The Python for beginners. This is an advance computer language.

john krisinger-the science and history of the alcoholic beverage.pptx

ISPM 15 Heat Treated Wood Stamps and why your shipping must have one

LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant

Comparative analysis between traditional aquaponics and reconstructed aquapon...

Software Quality Assurance-se412-v11.ppt

Transformers design and coooling methods

原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样

Curve Fitting in Numerical Methods Regression

Generative AI leverages algorithms to create various forms of content

Null Bangalore | Pentesters Approach to AWS IAM

CEC 352 - SATELLITE COMMUNICATION UNIT 1

2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf

Engineering Drawings Lecture Detail Drawings 2014.pdf

Software Engineering and Project Management - Introduction, Modeling Concepts...

132/33KV substation case study Presentation

IEEE Aerospace and Electronic Systems Society as a Graduate Student Member

CompEx~Manual~1210 (2).pdf COMPEX GAS AND VAPOURS

Crash cushion SMA City

4. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. Other fixed obstacles: - Concrete Kerb - Works of Art - Pedestrian Areas - Fences - Building edges - Tunnel entrances - New Jersey barriers - Temporary barriers - Pillars 3

5. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. Road Accident Statistics 3.543 Accidents 171 Death 4.496 Injuries The spill or heeling of the vehicle represents the second type of accident in single vehicles (9.2% of the total accidents). The impact against fixed obstacles belongs to this kind of accident. The front-side impact is the case that occurs most frequently (23% of cases). Impact against fixed obstacle 17.098 Accidents 724 Death 21.396 Injuries Spill or heeling Data ACI –ISTAT 2012 4

6. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. The installation of the restraint systems is mandatory when the safety distance between the fixed obstacle and the outer edge of the roadway is not respected. In this case the distance between the fixed obstacle and the carriageway is less than 1 meter. 5 Safety distance

7. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. The pictures below show the necessity of installation of a VRS in Urban Areas The installation of VRS is a must! 6 In all these cases the distance between the fixed obstacle and the carriageway is so small that a specific VRS becomes mandatory.

8. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. SMA City: The solution The Crash Cushion specifically designed by Industry A.M.S. to protect fixed obstacles within the Urban Areas! The performances of this system allow to protect the passengers from an impact until 50 km/h. 7

10. 740 mm 900mm Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. The reduced lenght of the system allows the installation also in places where the space is limited. This is why SMA City can be installed everywhere in the centre of the city for example in front of light poles, trees, pillars or roundabouts. Ultra compact sizes 9

11. 10 Right protection of the obstacles OBSTACLE Frontal view Top viewLateral view SMA City can protect a fixed obstacle in order to avoid a fatal impact No distance from the obstacle is required ! Copyright © 2014, Industry A.M.S. srl. All Rights Reserved.

12. 11 Example of installation of SMA City Below you can see the pictures of SMA City installed on the SS 7 bis in the city Center of Casalnuovo di Napoli. The device has been installed in front of an obstacle which has been impacted many times causing serious injuries to the passengers. Front view Rear viewLateral view Copyright © 2014, Industry A.M.S. srl. All Rights Reserved.

13. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. Structure completely made of steel Steel has the following advantages: - respects the eco-sustainability criteria; - is recyclable; - resists to temperatures until + 80° and - 20° degrees; - does not release debris after an impact. 12

14. The absorption of the energy The kinetic energy coming from the impact is gradually absorbed by the system in order to avoid serious injuries for the occupants of the vehicle. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. 13

15. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. After the impact the cells can be replaced and the system can be reused. 80% reusability The absorbing cells are the perfect system for the right absorption of the energy during an impact. 14 Before the impact After the impact

16. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. For further information give a look at our website: www.smaroadsafety.com Follow us on: - Facebook https://www.facebook.com/SMARoadSafety - Twitter https://twitter.com/SMARoadSafety - Linkedin https://www.linkedin.com/company/SMARoadSafety 15

17. Copyright © 2014, Industry A.M.S. srl. All Rights Reserved. Thank you for your attention! Industry A.M.S. SRL Via Dante Giacosa Zona ASI sud Marcianise (CE) Tel: +39 0823821560 Email: info@amssrl.com 16

Crash cushion SMA City

Recommended

Recommended

More Related Content

Similar to Crash cushion SMA City

Similar to Crash cushion SMA City (20)

Recently uploaded

Recently uploaded (20)

Crash cushion SMA City