Download to read offline
Corix - Access Solutions Brochure
- 2. CORIX Water Productsoffers access hatches designed to provide easy and secure access to below ground, below surface and below floor installations. Available in aluminum or galvanized steel and in a variety of sizes, our hatches are designed to meet your specifications. Applications include: • pump stations • water and wastewater treatment plants • water meter pits • cross connection control vaults • parking lots • storm drains • airports • gas and water valve vaults • monitoring wells Light duty pedestrian rated • Minimum live load of 300 lb. per square foot • Deflection shall not exceed 1/150th of the span • Applies to the ALN, CLN and CLS series • 300 lb. per square foot deflection shall not exceed 1/150th of the span using a maximum design stress of 17,200 psi as per the Aluminum Association, Inc. “Specification for Aluminum Structures” • Built to OSHA standard 1910.23 H-20 • 16,000 lb. + 30% impact factor on a 10" x 20" contact area • Applies to the AHS and CHS series • Not suitable for high density traffic • AASHTO H-20 wheel loads where not subject to high density traffic • Built to OSHA standard 1910.23 Access Hatches Our hatch doors are designed to meet all of your loading requirements: ALUMINUM HATCH OPTIONS ALUMINUM DESIGN OPTIONS Recessed Padlock Clip Safety Sure Grip Heavy Duty Lift Spring Stainless Steel Safety Chain Limit Switch Inside Turn Handle Pentahead Lettering Light Pedestrian 300 lb. load per square foot H-20* 16,000 lb. + 30% impact load on a 10" x 20" contact area LOADING Steel and Aluminum SPRING Steel and Aluminum Spring Assist Pneumatic spring to easily open door None Not supplied with standard unit *Not suitable for high density traffic. Angle Non-Channeling FRAME Channel Channels Water Away from Hatch Trough Frame with Drain Odour Control Gasket Uncompressed Gasket Debris Gasket Cover Door Suppression Gasket
- 3. Angle Frame • Angle frame • Redpowder coated stainless steel automatic hold open arm • Stainless steel hardware • 1/4" diamond plate • Recessed lift handle comes with “CORIX” cast on • Recessed stainless steel slam-lock • Recessed padlock clip • Hydraulic flush mount stainless steel lift assist with no exposed springs • Black tuffcoat 3.5PR industrial coating on exterior of frame for adhesion to concrete • O-ring in frame for odour, debris and moisture gasket • Removable TEE handle No vehicle traffic allowed. Low-Cost Angle Frame • Angle frame • Red powder coated stainless steel automatic hold open arm • Stainless steel hardware • 1/4" diamond plate • Recessed lift handle comes with “CORIX” cast on • Exposed padlock clip • Drip channel (double door hatches) Trough Frame • Trough frame with 1.5” drain coupling • Red powder coated stainless steel automatic hold open arm • Stainless steel hardware • 1/4" diamond plate • Recessed lift handle comes with “CORIX” cast on • Recessed stainless steel slam-lock • Recessed padlock clip • Internal safety release turn handle • Hydraulic flush mount stainless steel lift assist with no exposed springs • Black tuffcoat 3.5PR industrial coating on exterior of frame for adhesion to concrete • O-ring in frame for odour, debris and moisture gasket • Removable TEE handle • Drip channel (double door hatches) CORIX ITEM No. LOADING INTERIOR DIMENSION WEIGHT (LB.) SINGLE DOOR ASPCSAFPSD24X24 300 PSF 24" x 24" 58 ASPCSAFPSD30X30 300 PSF 30" x 30" 77 ASPCSAFPSD36X36 300 PSF 36" x 36" 136 ASPCSAFHSD24X24 H-20 24" x 24" 121 ASPCSAFHSD30X30 H-20 30" x 30" 160 ASPCSAFHSD36X36 H-20 36" x 36" 260 DOUBLE DOOR ASPCSAFPDD48X48 300 PSF 48" x 48" 48 ASPCSAFHDD36X72 H-20 36" x 72" 356 ASPCSAFHDD48X48 H-20 48" x 48" 633 ASPCSAFHDD48X96 H-20 48" x 96" 90 CORIX ITEM No. LOADING INTERIOR DIMENSION WEIGHT (LB.) SINGLE DOOR ASPCSLAFPSD24X24 300 PSF 24" x 24" 320 ASPCSLAFPSD30X30 300 PSF 30" x 30" 66 ASPCSLAFPSD36X36 300 PSF 36" x 36" 85 ASPCSLAFHSD24X24 H-20 24" x 24" 650 ASPCSLAFHSD30X30 H-20 30" x 30" 95 ASPCSLAFHSD36X36 H-20 36" x 36" 216 DOUBLE DOOR ASPCSLAFPDD48X48 300 PSF 48" x 48" 180 ASPCSLAFHDD48X48 H-20 48" x 48" 373 CORIX ITEM No. LOADING INTERIOR DIMENSION WEIGHT (LB.) SINGLE DOOR ASPCSTFPSD24X24 300 PSF 24" x 24" 18 ASPCSTFPSD30X30 300 PSF 30" x 30" 66 ASPCSTFPSD36X36 300 PSF 36" x 36" 118 ASPCSTFHSD24X24 H-20 24" x 24" 121 ASPCSTFHSD30X30 H-20 30" x 30" 164 ASPCSTFHSD36X36 H-20 36" x 36" 267 DOUBLE DOOR ASPCSTFPDD48X48 300 PSF 48" x 48" 33 ASPCSTFHDD36X72 H-20 36" x 72" 108 ASPCSTFHDD48X48 H-20 48" x 48" 170 ASPCSTFHDD48X96 H-20 48" x 96" 190 NOTE: All tables show standard sizes. Custom sizes are available. Please contact your nearest CORIX branch for specifications and drawings. No vehicle traffic allowed. Not suitable for high density traffic.
- 4. ABOUT CORIX WATERPRODUCTS CORIX Water Products maintains one of the largest single source inventories of water, wastewater and irrigation supplies in the industry. We also design and fabricate standard or custom-engineered utility infrastructure systems for municipal and industrial applications. CORIX offers a comprehensive and flexible approach to delivering the correct systems, from product and equipment supply to full system design, construction, operations and maintenance. We employ leading-edge technology at our facility in Langley, British Columbia to provide the best solution in the most cost-effective way with in-house design supported by mechanical, civil and chemical engineers and CAD and instrumentation technicians. Our complete offering of engineered products and systems includes: • Pressure reducing valve (PRV) stations • Valve chambers • Booster pump packages • Hatches • Fabricated pipe systems • Packaged systems with enclosed buildings DELIVERING THE CORIX ADVANTAGE As a fully integrated provider of utility infrastructure products, services and systems for water, wastewater and sustainable energy, our “one-stop shop” approach allows us to deliver comprehensive, flexible and innovative solutions to our customers’ most complex utility infrastructure challenges. SECURITY AND SAFETY - Technical Specifications • Design shall combine covering of the opening, fall through protection per OSHA Standard 1910.23 and controlled confine space entry per OSHA Standard 1910.146. • The safety grate shall be made of 6061-T6 aluminum and designed per the Specifications for Aluminum Structures by the Aluminum Association, Inc. 5th edition, December 1986 for “Bridge Type Structures”. • The grating shall be designed to withstand a minimum live load of 300 lb. per square foot using 17,300 psi as the design stress for the aluminum. Deflection shall not exceed 1/150th of the span. • Grate openings shall allow for visual inspection, limited maintenance and float adjustments while the safety grate fall through protection is left in place. • Design must assure that the fall through protection is in place before the doors can be closed, thereby protecting the next operator. • Each grate shall be provided with a permanent hinging system, which will lock the grate in the 90° position once opened. Grates in the open position create a visual barrier around the opening, alerting passing pedestrians. • Welding shall be in accordance with ANSI/AWS D1.2-90 Structural Welding Code for Aluminum. Contact CORIX today to discuss your project needs. Building a World of Sustainable Communities www.corix.com British Columbia Abbotsford 604.850.0441 Langley 604.455.3500 Duncan 250.746.8877 Coquitlam 604.464.6066 Richmond 604.273.4987 Kamloops 250.374.7909 Courtenay 250.334.3200 Vernon 250.545.8998 Kelowna 250.765.8668 Cranbrook 250.426.5059 Victoria 250.475.0055 Langford 250.474.3980 Calgary 403.203.4100 Grande Prairie 780.513.5010 Edmonton 780.465.0251 Lethbridge 403.327.9132 Alberta Red Deer 403.343.8257 Ontario Ajax 905.428.8608 Stoney Creek 905.662.5200 Kitchener 519.648.1212 Barrie 705.722.6199 Sudbury 705.524.6872 London 519.668.6095 Belleville 613.967.7871 Thorold 905.227.0705 Ottawa 613.822.4379 Hornby 905.693.0008 Sault Ste. Marie 705.254.7182 Windsor 519.972.4640 Saskatchewan Saskatoon 306.955.7007 Manitoba Winnipeg 204.632.0331 2013-03