According to LM-79, GB, CIE & IEC Standards. Test intensity distribution curve in 3D & export IES files for DiaLux. It already combined 1m length dark room and used to test the lamps which diameter is less than 18cm
The compact goniophotometer of LSG-1200A is used to measure the luminous intensity distribution curve, intensity data, spread angle and other parameters for Chip LED, LED Module, LED Spotlight and all other light which beam angle is no more than 180 degree.
The LSG-1200A compact goniophotometer is used to measure the luminous intensity distribution curve, intensity data, beam angle and other photometric for Chip LED, LED Module, LED Spotlight and all other light which spread angle is no more than 180 degree.
Inesa, produse LED , catalog Romania - COTRACO ROM srl si Urban IntelligencePeter Szabo
Catalogul produselor #inesa , gigantul chinez ale caror produse de Street lighting cu un excelent raport cost- eficienta sunt distribuite exclusiv de #Cotraco Rom SRL
Cataloge ge 3.control and_automation-30_vat300_e_appendix1_2_rev_cThuan Kieu
Cataloge ge 3.control and_automation-30_vat300_e_appendix1_2_rev_c
Catalog GE,
Catalog Thiết Bị Điện GE,
Catalog Điện Công Nghiệp GE,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
The Legionella kit is comprised of the testo 925 with penetration/immersion probe, Pipe-wrap probe and air probe. It comes in robust aluminium transport case.
The compact goniophotometer of LSG-1200A is used to measure the luminous intensity distribution curve, intensity data, spread angle and other parameters for Chip LED, LED Module, LED Spotlight and all other light which beam angle is no more than 180 degree.
The LSG-1200A compact goniophotometer is used to measure the luminous intensity distribution curve, intensity data, beam angle and other photometric for Chip LED, LED Module, LED Spotlight and all other light which spread angle is no more than 180 degree.
Inesa, produse LED , catalog Romania - COTRACO ROM srl si Urban IntelligencePeter Szabo
Catalogul produselor #inesa , gigantul chinez ale caror produse de Street lighting cu un excelent raport cost- eficienta sunt distribuite exclusiv de #Cotraco Rom SRL
Cataloge ge 3.control and_automation-30_vat300_e_appendix1_2_rev_cThuan Kieu
Cataloge ge 3.control and_automation-30_vat300_e_appendix1_2_rev_c
Catalog GE,
Catalog Thiết Bị Điện GE,
Catalog Điện Công Nghiệp GE,
http://dienhathe.com,
Xem thêm các sản phẩm khác của GE tại https://dienhathe.com
Để nhận báo giá sản phẩm GE vui lòng gọi: 0907.764.966
The Legionella kit is comprised of the testo 925 with penetration/immersion probe, Pipe-wrap probe and air probe. It comes in robust aluminium transport case.
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-5000 CCD Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-9000B or LMS-9000A) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.
LSG-2000 Goniophotometer with Rotating Mirror is also called the Moving Mirror Goniophotometer. It is an automatic light distribution intensity 3D curve testing system.
Lisun Goniospectroradiometer with Moving Mirror can test luminaries rotating in the presscribed burning position and around the vertical axle and a reflecting mirror rotates around the horizontal axle, meanwhile, a synchronous axle will rotate toward the opposite direction synchronously.
Test intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Japanese motor, German Angle Coder and Constant Temperature Class L Detector to keep high accuracy. Both B-Beta & C-Gamma test for all luminaires up to 1.4m and 40kg
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-3000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LSG-5000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
It is according to IEC 60929, IEC 60969 and IEC61000-3-2. Up to 1MHz lrms can test every EB and has expanding analysis function for envelope wave. With big LCD can display the test results directly without PC
It is ccording to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC/DC), Output Characteristics Test (AC/DC), Start Characteristics Test (DC) and Hormanic Test.
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-5000 CCD Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying the performance of single LEDs and LED lamps. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE127-1997, IES LM-79-08 and IES LM-80-08, it recommends to using an array spectroradiometer with integrating sphere to test SSL products. The LPCE-2 system is applied with a CCD Spectroradiometer (LMS-9000B or LMS-9000A) and worked with A molding integrating sphere with testing holder base function which will be more circle and the test results will be more accurate than the traditional integrating sphere.
LSG-2000 Goniophotometer with Rotating Mirror is also called the Moving Mirror Goniophotometer. It is an automatic light distribution intensity 3D curve testing system.
Lisun Goniospectroradiometer with Moving Mirror can test luminaries rotating in the presscribed burning position and around the vertical axle and a reflecting mirror rotates around the horizontal axle, meanwhile, a synchronous axle will rotate toward the opposite direction synchronously.
Test intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Japanese motor, German Angle Coder and Constant Temperature Class L Detector to keep high accuracy. Both B-Beta & C-Gamma test for all luminaires up to 1.4m and 40kg
LSG-5000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 and EN13032-1 clause 6.1.1.3 goniophotometer type 4 requirements. The LSG-5000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources, LED or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
LSG-3000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LSG-5000 Moving Detector Goniophotometer is full meet LM-79 Clause 9.3.1 request. The tested lamp will keep burning position and be fixed, near field detector move together with the big mirror in a line, and the far field detector will move with the big mirror synchronously. The detector will always sense the light directly from the luminaries.
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage mercury lamps) and CCFL. The measured data meets the requirements of CIE, EN and LM-79 clause 9.1 for the measurement of photometry and colorimetry.
It is according to IEC 60929, IEC 60969 and IEC61000-3-2. Up to 1MHz lrms can test every EB and has expanding analysis function for envelope wave. With big LCD can display the test results directly without PC
It is ccording to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC/DC), Output Characteristics Test (AC/DC), Start Characteristics Test (DC) and Hormanic Test.
The chamber fully complies with the requirements of Standard GB/T16585-1996, GB14522-93, GB/T16422.3-97, ASTMG53 and etc., provides the best UV sunlight simulation, and is easy to use and operate.
It is adopts the theory of spectrophotometer. It used for plastic, printing, paint, ink, textile, dyeing and other industries for color management. It measure L*a*b, L*c*h and the sample △E and △Lab value
Full meet LM-79 Clause 9.3.1, GB, CIE & IEC Standards. Test intensity distribution curve in 3D & export IES files for DiaLux. It can test all kinds of luminaires which length up to dia=0.6m and max 20kg
Test intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Japanese motor, Angle Coder and Constant Temperature Class A Detector to keep high accuracy. Both B-Beta & C-Gamma test for all luminaires up to 1.4m and 40kg
High Precision Goniophotometer for Automotive and Traffic Signal LampsLisun Group
It is a CIE A-α Goniophotometer and full meet GB, ECE, SAE, JIS, KS and FMVSS108. Test intensity distribution curve in 3D & export IES files for DiaLux. The test lamp can be max 35kg
Near Field Moving Detector GoniophotometerLisun Group
The near field moving detector goniophotometer is fully meet LM-79 and need very small dark room size. It tests intensity distribution curve in 3D & export IES files for DiaLux. It can test max size of luminaire up to Φ300mm(diameter)*550mm(height) and 20kg
Rotation Luminaire Goniophotometer (Big Size)1600BLisun Group
Test intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Taiwan motor and Constant Temperature Detector to keep high accuracy. Test all luminaires up to 1.6m and 40kg
Rotation Luminaire GoniospectroradiometerLisun Group
Test Spatial CCT and intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Taiwan motor, Angle Coder and Constant Temperature Class A Detector to keep high accuracy. B-Beta & C-Gamma test for all lamps up to 1.6m and 40kg
Rotation Luminaire Goniophotometer (Big Size)Lisun Group
Test intensity distribution curve in 3D & export IES files for DiaLux. Applicated with Taiwan motor and Constant Temperature Detector to keep high accuracy. Test all luminaires up to 1.6m and 40kg
CCD Detector and spectrum range is 380~780nm. Test lux and all color parameters. The size is compact and applicated with 5inch big LCD Screen, with 4000mAH battery which can work over 20hours.
It is ccording to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters for 60 LED Drivers at one time in production line quick in 20s: Input Characteristics Test (AC), Output Characteristics Test (AC/DC) and harmonic
According to IESNA LM-80-2008, LM-82 and TM-21, it will record the lumen for L70, L50 and L30, the software is based on Arrhenius model to calculate the LED life
HSCD-750 adopts the geometric of D/11 lighting. It can be used for color matching for many industries and widely used in painting industry, textile industry, plastic industry, food industry, and other industries for quality control
According to IEC61000-4-5, EN61000-4-12, ANSI C62.41.1/2-2002 and GB/T17626.5,12. Combined SG61000-5 Surge Generator and RWG61000-12 Ring Wave Generator, the system already built-in single phase CDN.
Includes EMI Receiver, Artificial Network, CDN23, Isolation Transformers, Attenuator and Coaxial Cable. Frequency is 9K~300MHZ, measure PK,QP and AV range from 20dBμV to 140dBμV, test tolerance is 2dB
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
1. Compact Goniophotometer
(LSG-1200A)
Brochure
Global Office of Lisun Electronics Inc.
http://www.Lisungroup.com
Lisun Group (Hong Kong) Limited
Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road, Mongkok, Kowloon,
Hong Kong
Tel: 00852-68852050 Fax: 00852-30785638
Email: SalesHK@Lisungroup.com
Lisun Electronics (Shanghai) Co., Ltd
Add: 113-114, No. 1 Building, Nanxiang Zhidi Industry Park, No. 1101, Huyi Road, Jiading
District, Shanghai, 201802, China
Tel: +86(21)5108 3341 Fax: +86(21)5108 3342
Email: SalesSH@Lisungroup.com
Lisun Electronics Inc. (USA)
Add: 445 S. Figueroa Street, Los Angeless, CA 90071, U.S.A.
Email: Sales@Lisungroup.com
Lisun China Factory
Add: NO. 37, Xiangyuan Road, Hangzhou City, Zhejiang Province, China
Tel: +86-189-1799-6096
Email: Engineering@Lisungroup.com
Lead in CFL & LED Test Instruments
2. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 1 -
The compact goniophotometer of LSG-1200A, various dark rooms are selectable
according to the size of tested lamps. It is used to measure the luminous intensity
distribution curve, intensity data, spread angle and other parameters for Chip LED,
LED Module, LED Spotlight and all other light which beam angle is no more than 180
degree.
Option Function: The LSG-1200A can work with a Digital Power Meter [LS2010
Digital Power Meter Harmonic Analyzer Model or LS2012 DC & AC Power Meter] and
LSP-500VA AC Power Source
Measures:
Electronic parameters, spatial intensity distribution curve, spatial iso-intensity
curve, iso-illuminance distribution curve, luminance limitation curve, luminaire
efficiency, glare grade, effective beam angle, upward luminous flux ratio, downward
luminous flux ratio, total luminous flux, effective luminous flux, utilization factor.
Host Rear Panel Diagram
Picture 1
3. Lisun Electronics Inc. Sales@Lisungroup.com www.Lisungroup.com
-Page 2 -
Technical Specification:
LSG-1200A has included a dark case
Test range of luminosity: 0.1~30,000lx
Test accuracy of luminosity: Class A
Test range of angle:
LSG-1200A: Horizontal angle: -0°~360° (Automatic)
Vertical angle: -90°~+90°(Automatic)
Test accuracy of angle: ±0.2°
Angle interval: Horizontal angle: 1°/5°/10°/15°/22.5°/30°/45°/90°
Vertical angle: 0.5°/2°/1.5°
Measure the maximum size of lamps: diameter=180mm
The distance between the tested lamp and detector is 316mm/1000mm
Measure beam angle automatically: staple half intensity angle as well as 1/4
intensity angle, 3/4 intensity angle and 1/10 intensity angle which meets the
special requirements.
Draw spatial luminous intensity distributional curve automatically (polar
coordinates and right-angle coordinates)
Measured data match with international standard form (IES) and can be applied
for lighting design by other lighting design software such as Dialux
RS-232C interface, compatible with all kinds of computers
Meets the requirements of IEC, CIE and LM-79 standards
Work power supply:
a) Power supply voltage: AC 220V±10%
b) Power frequency: 50Hz/60Hz
c) Power dissipation: 35VA
Requirement of working environment:
a) Allowable working environmental temperature: 0℃~40℃
b) Best temperature for normal test: 25℃±5℃
c) Relative humidity: ≤65%R.H
Typical oversea market customers:
***********
Please get the reference customers’ information from Lisun Oversea Sales Dept.
The Next Page is the Test Report by software
4. Lisun Electronics Inc
http://www.Lisungroup.com
Tel:+86(21)51083341
Fax:+86(21)51083342 Page 1 of 21 Pages
Report No.: Test Time: 2017-8-27 11:44
Luminaire Property
Luminaire Manufacturer: GE Lighting
Luminous Length (mm): 40 Luminous Width (mm): 40
Luminous Height (mm): 50 Voltage: 220.0 V
Current: 0.031 A Power: 5.28 W
Power Factor: 0.778
Photometric Results
CIE Class: Semi-Direct Total Rated Lamp Lumens: 388.7 lm
Measurement Flux: 388.7 lm Efficiency: 100%
Downward Ratio: 76% Upward Ratio: 24%
Field Angle: H292.8 V291.5 Beam Angle: H169.0 V167.6
Luminaire Efficacy Rating (LER): 74 Central Intensity: 63.8 cd
Max. Intensity: 64.11 cd Pos of Max. Intensity: H180 V10
Picture Of Luminaire Luminous Intensity Distribution Curve
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
80
64
48
32
16
C0-C180 C90-C270 G10
Unit: cd
C Plane (°):0.0-360.0: 45.0 Gamma Plane (°):0.0-180.0:1.0
Test Lab: Lisun Group Test Device: LSG-1200A Goniospectroradiometer
Test Type: TYPE C Distance: 1.0 m
Temperature: 25 ℃ Humidity: 65 %
Operator: Jim Inspector:
5. Lisun Electronics Inc
http://www.Lisungroup.com
Tel:+86(21)51083341
Fax:+86(21)51083342 Page 2 of 21 Pages
Luminous Intensity Distribution Curve
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
80
64
48
32
16
-180 -120 -60 0 60 120 180
0
16
32
48
64
80
C0-C180 C90-C270 Unit: cd
C Plane (°):0.0-360.0: 45.0 Gamma Plane (°):0.0-180.0:1.0
Test Lab: Lisun Group Test Device: LSG-1200A Goniospectroradiometer
Test Type: TYPE C Distance: 1.0 m
Temperature: 25 ℃ Humidity: 65 %
Operator: Jim Inspector:
6. Lisun Electronics Inc
http://www.Lisungroup.com
Tel:+86(21)51083341
Fax:+86(21)51083342 Page 3 of 21 Pages
Luminous Intensity Distribution Curve(cd/klm)
0
180
9090
1515
165165
3030
150150
4545
135135
6060
120120
7575
105105
206
164
123
82
41
cd/klm
C0-C180
C90-C270
η=100%
C Plane (°):0.0-360.0: 45.0 Gamma Plane (°):0.0-180.0:1.0
Test Lab: Lisun Group Test Device: LSG-1200A Goniospectroradiometer
Test Type: TYPE C Distance: 1.0 m
Temperature: 25 ℃ Humidity: 65 %
Operator: Jim Inspector: