CMP BW50S LSF Brass Cable Gland (Zero Halogen) 38.1-50.1mm
•
0 likes•156 views
This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.
Report
Share
Report
Share
Download to read offline
Recommended
CMP E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero...
CMP E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero...Thorne & Derrick International
The document provides information on cable gland kits for sealing and retaining armored and unarmored cables. It describes the E1W SOLO LSF kit for armored cables which provides environmental sealing and mechanical retention via an armor wire termination. It also describes the A2 SOLO LSF kit for unarmored cables which provides sealing of the cable outer sheath. Both kits include shrouds and seals and provide specifications on materials, temperature ratings, and cable types and sizes supported. Dimension drawings and ordering information is also included.Nelson QLT Heat Tracing Cable - Spec Sheet
Nelson's Type QLT self-regulating heater cable uses a conductive fluoropolymer core and parallel circuit design to self-regulate heat output along its length. It is ideal for maintaining temperatures from -20°F to 250°F in applications like hydrocarbon and chemical piping. The cable automatically adjusts power based on conditions to prevent hot spots while maintaining useful heat levels.
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...Thorne & Derrick International
This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.Hawke CSB 656N Hazardous Area Cable Gland
This document provides information on cable glands that are certified for flameproof, increased safety, and dust protection applications in hazardous locations. It includes details on the certifications, technical specifications, features, applications, and ordering information for the cable glands.
BW Brass Cable Glands - BICC, BICON, Prysmian
This document provides information about BW Brass Gland Kits for securing armored cables. The kits contain brass glands, earth tags, locknuts, and PVC shrouds for retaining and providing electrical continuity for armored cables. The kits are suitable for indoor use with galvanized steel cabled between 11.6mm to 67.9mm in diameter. The kits are made from brass alloy for strength and performance in temperatures ranging from -20°C to +90°C.
Fire Protection & Emergency System Junction Boxes & Electrical Enclosures
The document describes WKE terminal boxes for industrial and emergency systems offering up to 90 minutes of fire protection and IP54 ingress protection. It lists several WKE terminal box models ranging from 2 to 5 poles made of high temperature ceramic or thermoset plastic materials and providing flame protection classes E30 to E90 according to DIN 4102 standards. Additional WKE terminal box models for public facilities are described offering up to IP66 ingress protection, 30 minutes flame protection, and halogen-free thermosetting plastic construction. Contact information is provided for Thorne and Derrick UK.
Hazardous Area Lighting, Plugs & Sockets, Control Stations & Junction Boxes |...
Hazardous Area Lighting, Plugs & Sockets, Control Stations & Junction Boxes |...Thorne & Derrick International
The document provides information on electrical equipment selection for explosive atmospheres caused by gases and dusts. It lists common industrial applications that can create explosive gas or dust hazards, including food processing, woodworking, metalworking, plastics processing, petrochemicals, and more. The document then provides product recommendations from Appleton for lighting, sockets, plugs, switches, and junction boxes that meet certification for use in zones with gas or dust hazards. Product lines are listed for explosionproof, flameproof, and increased safety protection types suitable for different hazard zones.Datwyler universal safety fire fiber cabel info tech middle east
Datwyler Universal Fiber Optic Fire Safety cable E30 - 30 minutes System Circuit Integrity ..
Metal-free, water resistant, rodent protection,
in accordance with IEC 60332.1 and IEC 60332.3 C
30 minutes System Circuit Integrity according to DIN 4102-12
Application :
Safety applications in tunnels, underground railways, banks, insurance companies, large-scale industry , Public Area , Mall , Towers .
Fiber optic LAN backbone.
Indoor and outdoor cabling.
Can be installed in cable platforms, trays, ducts and vertical shafts.
Can be spliced in FO distributors.
Zero halogen, no corrosive gases :
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2
Flame propagation:
IEC 60332-1/-2, EN 60332-1-2, VDE 0482-332-1-2
Flame spread:
IEC 60332.3 C, EN 50266-2-4, VDE 0482-266-2-4
Smoke density:
IEC 61034-1/-2, EN 61034-1/-2 (EN 50268-1/-2), VDE 0482-1034-1/-2 (VDE 0482-268-1/-2)
Circuit Integrity (FE180):
IEC 60331-11, IEC 60331-25, VDE 0472 part 814, EN 50200 PH 90, EN 50362, VDE 0482-200, VDE 0482-362:
System circuit integrity
according to DIN 4102 part 12, VKF Fire Safety Application No. 24176
Please Contact Info Tech Middle East for more Detail : Info@InfoTechME.ws
Recommended
CMP E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero...
CMP E1W LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero...Thorne & Derrick International
The document provides information on cable gland kits for sealing and retaining armored and unarmored cables. It describes the E1W SOLO LSF kit for armored cables which provides environmental sealing and mechanical retention via an armor wire termination. It also describes the A2 SOLO LSF kit for unarmored cables which provides sealing of the cable outer sheath. Both kits include shrouds and seals and provide specifications on materials, temperature ratings, and cable types and sizes supported. Dimension drawings and ordering information is also included.Nelson QLT Heat Tracing Cable - Spec Sheet
Nelson's Type QLT self-regulating heater cable uses a conductive fluoropolymer core and parallel circuit design to self-regulate heat output along its length. It is ideal for maintaining temperatures from -20°F to 250°F in applications like hydrocarbon and chemical piping. The cable automatically adjusts power based on conditions to prevent hot spots while maintaining useful heat levels.
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...
CMP BW LSF Brass Cable Glands - CMP Solo Cable Glands Low Smoke & Fume, Zero ...Thorne & Derrick International
This document provides information on cable gland and cable connection products from CMP, including two types of cable gland kits: the BW SOLO kit for indoor use and the CW SOLO kit for indoor and outdoor use. Both kits provide mechanical cable retention and electrical continuity for single wire armour cables. They include cable glands, locknuts, tags, and CMP SOLO LSF shrouds or seals. Technical data is provided on material, temperature range, cable types, and dimensions. A cable gland selection table lists available gland sizes and references.Hawke CSB 656N Hazardous Area Cable Gland
This document provides information on cable glands that are certified for flameproof, increased safety, and dust protection applications in hazardous locations. It includes details on the certifications, technical specifications, features, applications, and ordering information for the cable glands.
BW Brass Cable Glands - BICC, BICON, Prysmian
This document provides information about BW Brass Gland Kits for securing armored cables. The kits contain brass glands, earth tags, locknuts, and PVC shrouds for retaining and providing electrical continuity for armored cables. The kits are suitable for indoor use with galvanized steel cabled between 11.6mm to 67.9mm in diameter. The kits are made from brass alloy for strength and performance in temperatures ranging from -20°C to +90°C.
Fire Protection & Emergency System Junction Boxes & Electrical Enclosures
The document describes WKE terminal boxes for industrial and emergency systems offering up to 90 minutes of fire protection and IP54 ingress protection. It lists several WKE terminal box models ranging from 2 to 5 poles made of high temperature ceramic or thermoset plastic materials and providing flame protection classes E30 to E90 according to DIN 4102 standards. Additional WKE terminal box models for public facilities are described offering up to IP66 ingress protection, 30 minutes flame protection, and halogen-free thermosetting plastic construction. Contact information is provided for Thorne and Derrick UK.
Hazardous Area Lighting, Plugs & Sockets, Control Stations & Junction Boxes |...
Hazardous Area Lighting, Plugs & Sockets, Control Stations & Junction Boxes |...Thorne & Derrick International
The document provides information on electrical equipment selection for explosive atmospheres caused by gases and dusts. It lists common industrial applications that can create explosive gas or dust hazards, including food processing, woodworking, metalworking, plastics processing, petrochemicals, and more. The document then provides product recommendations from Appleton for lighting, sockets, plugs, switches, and junction boxes that meet certification for use in zones with gas or dust hazards. Product lines are listed for explosionproof, flameproof, and increased safety protection types suitable for different hazard zones.Datwyler universal safety fire fiber cabel info tech middle east
Datwyler Universal Fiber Optic Fire Safety cable E30 - 30 minutes System Circuit Integrity ..
Metal-free, water resistant, rodent protection,
in accordance with IEC 60332.1 and IEC 60332.3 C
30 minutes System Circuit Integrity according to DIN 4102-12
Application :
Safety applications in tunnels, underground railways, banks, insurance companies, large-scale industry , Public Area , Mall , Towers .
Fiber optic LAN backbone.
Indoor and outdoor cabling.
Can be installed in cable platforms, trays, ducts and vertical shafts.
Can be spliced in FO distributors.
Zero halogen, no corrosive gases :
IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2
Flame propagation:
IEC 60332-1/-2, EN 60332-1-2, VDE 0482-332-1-2
Flame spread:
IEC 60332.3 C, EN 50266-2-4, VDE 0482-266-2-4
Smoke density:
IEC 61034-1/-2, EN 61034-1/-2 (EN 50268-1/-2), VDE 0482-1034-1/-2 (VDE 0482-268-1/-2)
Circuit Integrity (FE180):
IEC 60331-11, IEC 60331-25, VDE 0472 part 814, EN 50200 PH 90, EN 50362, VDE 0482-200, VDE 0482-362:
System circuit integrity
according to DIN 4102 part 12, VKF Fire Safety Application No. 24176
Please Contact Info Tech Middle East for more Detail : Info@InfoTechME.ws
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...Thorne & Derrick International
Prysmian (BICON) Cable Glands for FP Cables Prysmian (BICON) cable gland kits are suitable for glanding and terminating the Prysmian FP Fire Resistant and Fire Performance range of cables - this includes Prysmian (BICON) cable glands kits for FP100, FP200, FP400, FP600, FP600 Plus and FP Plus fire resistant cables. T&D UK distribute the complete range of Prysmian (BICON) cable gland kits including Industrial BICON Cable Glands (A2, BW, CW, E1W), Hazardous Area Flameproof BICON Cable Glands (E1FW), Barrier BICON Cable Glands and High Voltage BICON Cable Glands. Prysmian BICON FP Cable Gland Kits - Overview : • Prysmian CW BICON Cable Gland Kits LSF LSOH (Indoor Outdoor) - For Steel Wire Armoured Cable - Prysmian FP600S Cables • Prysmian Brass BICON Cable Gland Kits (Indoor Outdoor) - For Steel Wire Armoured Cables - Prysmian FP600 Cables • Prysmian Plastic BICON Cable Gland Kits - Prysmian FP100, FP200 Gold and FP Plus Cables • Prysmian E1W LSF BICON Cable Gland Kits - Prysmian FP400 CablesSommer cable catalogue section 3
This document provides information about ready-made cables for potential equalization systems, studio applications, and general power supplies. It includes descriptions of connection boxes and cables for potential equalization systems that combine robust connectors with star wiring distribution boards. Studio microphone cables are detailed that offer shielding and accurate audio transmission. Finally, power strips are listed that provide reliable power for devices through sound contacts and surge protection.
Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...
Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...Yamuna Infra & Technology Pvt. Ltd.
Yamuna Infra & Technology Pvt. Ltd. is an India based leading manufacturer and exporter of high-quality heat shrinkable power cable jointing kits, heat shrinkable power cable termination kits and power cable accessories upto 36kV. Established in 1996, we have been supplying many of the leading power and telecom industries all over the world. We manufacture and market our products under 'US-SEAL' brand/trademark, which itself speak about million acknowledgements for their performance. We are one of the leading companies focused on manufacturing high-quality heat shrinkable moulded components such as cable breakout boots, cable end sealing caps and other electric cable accessories.
For more information visit www.yamunainfra.com 3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...
This document provides information on various earthing kits and accessories from 3M for establishing electrical continuity and grounding across cable joints. It describes 10 different Armour Continuity Kits from 3M that are used for inline, tee, or branch configurations on armored power cables. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braid tapes, copper braid, and tools that can be used for bonding armor wires and providing an electrical connection or fault current path for cable joints and terminations.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...
EPKT- 17C3MOH3 B21 G43
36for 36 kVSize in mm27.2 kV 12 kV & 17.5 kV 24 kV 36 kVA 16 - 50 16 - 25 - -B 70 - 120 35 - 70 25 - 50 -C 150 - 240 95 - 240 70 - 185 50 - 95D300 - 500 300 - 400 240 - 300 120 - 185E630 - 1000 500 - 800 400 - 630 240 - 500F - 1000 800 - 1000 630 - 1000No. of Cores1 for single (1) core3for three (3) coreDielectric of insulation typeX for PLASTIC eg. XLPE, EPDM, EPR, etc.M for MIND non-draining paper (not applicable for draining paper cables)Location of the terminationI for INDOORO for OUTDOORLength (only 3-core) of the terminated portion (tail)H1 for 450 mm longH2for 650 mm long (min for 17.5 kV outdoor & 36 kV indoor)H3for 800 mm long (min for 24 kV outdoor & 36 kV outdoor)H4for 1200 mm long
12 - 18 16 - 50 16 - 50 16 - 25 - - EAKT 1655 G 55
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...Thorne & Derrick International
This document is a catalogue from Nexans Network Solutions Division Euromold. It provides information on various cable accessories produced by Euromold including separable connectors, bushings, and plugs. The document includes specifications, standards, and ordering information for product items like the 158LR elbow connector, 152SR straight connector, and 151SP straight plug. It also provides diagrams to illustrate the products and their applications for connecting cable to equipment or other cables.Electrician club with cables
This document describes various electrical products manufactured by Orange Cables including indoor cables, unarmoured power cables, switchgear cables, data cables, auto cables, coaxial cables, circuit breakers, residual current circuit breakers, industrial switchgears, socket outlets, LED and CFL lighting, and industrial panel boards. The key materials used include flame retardant polycarbonate and nylon, high grade brass, phosphor bronze, and high quality silver alloy. Products meet various international standards.
Earth Bonding Kits - 3M
This document describes various earthing kits and accessories for providing electrical continuity and bonding across cable joints. It discusses 3M's AC series armour continuity kits which contain contact rings and steel bands for inline, tee, or branch cable configurations. It also mentions constant force springs, earth bonding kits, copper braid, and shielding/grounding tape that can be used for bonding cable armour wires and providing a fault current path. Sizes and applications are provided for each product.
Nexans Euromold Interface A 200 Series Screened Cable Connectors
This document is a catalogue from Nexans Network Solutions Div. Euromold that provides information on cable accessories. It describes various prefabricated cable accessories that Euromold manufactures for medium voltage energy distribution, including premoulded EPDM rubber connectors for cables and epoxy bushings. It provides details on Euromold's ISO 9001 and laboratory accreditation certification. The document also includes specifications for separable connectors like the 158LR elbow connector and 152SR straight connector that are designed to connect cables to equipment up to 24kV and 250A. It provides ordering information and diagrams for these connectors.
Nexans Euromold MV Separable Connectors & Bushings - Interface A
This document is a catalogue from Nexans Network Solutions Div. Euromold that provides information on cable accessories. It describes various prefabricated cable accessories that Euromold manufactures for medium voltage energy distribution, including premoulded EPDM rubber connectors for cables and epoxy bushings. It provides details on Euromold's ISO 9001 and laboratory accreditation certification. The document also includes specifications for separable connectors like the 158LR elbow connector and 152SR straight connector that are designed to connect cables to equipment up to 24kV and 250A. It provides ordering information and diagrams for these connectors.
Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors
This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.
Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical
Nexans Euromold MV Separable Connectors & Bushings - Interface C SymmetricalThorne & Derrick International
This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
Pearl broucher
This document provides information on various types of brass cable glands and fittings produced by The Pearl International, including:
- Type A1/A2 cable glands that provide IP66 protection and single displacement sealing for unarmored cables
- BW cable glands for armored cables that provide mechanical retention and electrical continuity via a three-part armor lock
- Double compression glands that provide IP66 protection and seal both the inner and outer sheaths of steel wire armored cables
- Specifications, materials, sizes, temperature ratings, and accessories are provided for each type.
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...Thorne & Derrick International
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits that provide electrical continuity across cable joints, along with accepted cable diameters and copper cord lengths. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braids, and copper braid options for providing earth continuity and fault current paths. Technical support contact information is provided at the end.3M Constant Force Springs - 3M Scotch Electrical Tapes
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits (AC kits) that provide electrical continuity across cable joints for armoured cables. It also lists constant force springs, earth bonding kits, copper braid, and electrical shielding braid that can be used for bonding armour wires and providing fault current paths and shielding. Technical support contact information is provided at the end.
3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...
3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...Thorne & Derrick International
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits that provide electrical continuity across cable joints, along with accepted cable diameters and copper cord lengths. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braids, and copper braid options for providing earth continuity and fault current paths. Technical support contact information is provided at the end.3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...Thorne & Derrick International
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Grounding & Earth Braid Electrical TapesPrysmian BICC BICON Cable Glands - Catalogue
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's extensive experience in producing cable glands and accessories and its comprehensive product ranges for both industrial and hazardous applications. The document includes sections on low smoke zero halogen materials, deluge testing, ingress protection indexing, and guides for selecting the appropriate industrial or hazardous area cable gland.
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.More Related Content
Similar to CMP BW50S LSF Brass Cable Gland (Zero Halogen) 38.1-50.1mm
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...Thorne & Derrick International
Prysmian (BICON) Cable Glands for FP Cables Prysmian (BICON) cable gland kits are suitable for glanding and terminating the Prysmian FP Fire Resistant and Fire Performance range of cables - this includes Prysmian (BICON) cable glands kits for FP100, FP200, FP400, FP600, FP600 Plus and FP Plus fire resistant cables. T&D UK distribute the complete range of Prysmian (BICON) cable gland kits including Industrial BICON Cable Glands (A2, BW, CW, E1W), Hazardous Area Flameproof BICON Cable Glands (E1FW), Barrier BICON Cable Glands and High Voltage BICON Cable Glands. Prysmian BICON FP Cable Gland Kits - Overview : • Prysmian CW BICON Cable Gland Kits LSF LSOH (Indoor Outdoor) - For Steel Wire Armoured Cable - Prysmian FP600S Cables • Prysmian Brass BICON Cable Gland Kits (Indoor Outdoor) - For Steel Wire Armoured Cables - Prysmian FP600 Cables • Prysmian Plastic BICON Cable Gland Kits - Prysmian FP100, FP200 Gold and FP Plus Cables • Prysmian E1W LSF BICON Cable Gland Kits - Prysmian FP400 CablesSommer cable catalogue section 3
This document provides information about ready-made cables for potential equalization systems, studio applications, and general power supplies. It includes descriptions of connection boxes and cables for potential equalization systems that combine robust connectors with star wiring distribution boards. Studio microphone cables are detailed that offer shielding and accurate audio transmission. Finally, power strips are listed that provide reliable power for devices through sound contacts and surge protection.
Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...
Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...Yamuna Infra & Technology Pvt. Ltd.
Yamuna Infra & Technology Pvt. Ltd. is an India based leading manufacturer and exporter of high-quality heat shrinkable power cable jointing kits, heat shrinkable power cable termination kits and power cable accessories upto 36kV. Established in 1996, we have been supplying many of the leading power and telecom industries all over the world. We manufacture and market our products under 'US-SEAL' brand/trademark, which itself speak about million acknowledgements for their performance. We are one of the leading companies focused on manufacturing high-quality heat shrinkable moulded components such as cable breakout boots, cable end sealing caps and other electric cable accessories.
For more information visit www.yamunainfra.com 3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...
This document provides information on various earthing kits and accessories from 3M for establishing electrical continuity and grounding across cable joints. It describes 10 different Armour Continuity Kits from 3M that are used for inline, tee, or branch configurations on armored power cables. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braid tapes, copper braid, and tools that can be used for bonding armor wires and providing an electrical connection or fault current path for cable joints and terminations.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...
EPKT- 17C3MOH3 B21 G43
36for 36 kVSize in mm27.2 kV 12 kV & 17.5 kV 24 kV 36 kVA 16 - 50 16 - 25 - -B 70 - 120 35 - 70 25 - 50 -C 150 - 240 95 - 240 70 - 185 50 - 95D300 - 500 300 - 400 240 - 300 120 - 185E630 - 1000 500 - 800 400 - 630 240 - 500F - 1000 800 - 1000 630 - 1000No. of Cores1 for single (1) core3for three (3) coreDielectric of insulation typeX for PLASTIC eg. XLPE, EPDM, EPR, etc.M for MIND non-draining paper (not applicable for draining paper cables)Location of the terminationI for INDOORO for OUTDOORLength (only 3-core) of the terminated portion (tail)H1 for 450 mm longH2for 650 mm long (min for 17.5 kV outdoor & 36 kV indoor)H3for 800 mm long (min for 24 kV outdoor & 36 kV outdoor)H4for 1200 mm long
12 - 18 16 - 50 16 - 50 16 - 25 - - EAKT 1655 G 55
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...Thorne & Derrick International
This document is a catalogue from Nexans Network Solutions Division Euromold. It provides information on various cable accessories produced by Euromold including separable connectors, bushings, and plugs. The document includes specifications, standards, and ordering information for product items like the 158LR elbow connector, 152SR straight connector, and 151SP straight plug. It also provides diagrams to illustrate the products and their applications for connecting cable to equipment or other cables.Electrician club with cables
This document describes various electrical products manufactured by Orange Cables including indoor cables, unarmoured power cables, switchgear cables, data cables, auto cables, coaxial cables, circuit breakers, residual current circuit breakers, industrial switchgears, socket outlets, LED and CFL lighting, and industrial panel boards. The key materials used include flame retardant polycarbonate and nylon, high grade brass, phosphor bronze, and high quality silver alloy. Products meet various international standards.
Earth Bonding Kits - 3M
This document describes various earthing kits and accessories for providing electrical continuity and bonding across cable joints. It discusses 3M's AC series armour continuity kits which contain contact rings and steel bands for inline, tee, or branch cable configurations. It also mentions constant force springs, earth bonding kits, copper braid, and shielding/grounding tape that can be used for bonding cable armour wires and providing a fault current path. Sizes and applications are provided for each product.
Nexans Euromold Interface A 200 Series Screened Cable Connectors
This document is a catalogue from Nexans Network Solutions Div. Euromold that provides information on cable accessories. It describes various prefabricated cable accessories that Euromold manufactures for medium voltage energy distribution, including premoulded EPDM rubber connectors for cables and epoxy bushings. It provides details on Euromold's ISO 9001 and laboratory accreditation certification. The document also includes specifications for separable connectors like the 158LR elbow connector and 152SR straight connector that are designed to connect cables to equipment up to 24kV and 250A. It provides ordering information and diagrams for these connectors.
Nexans Euromold MV Separable Connectors & Bushings - Interface A
This document is a catalogue from Nexans Network Solutions Div. Euromold that provides information on cable accessories. It describes various prefabricated cable accessories that Euromold manufactures for medium voltage energy distribution, including premoulded EPDM rubber connectors for cables and epoxy bushings. It provides details on Euromold's ISO 9001 and laboratory accreditation certification. The document also includes specifications for separable connectors like the 158LR elbow connector and 152SR straight connector that are designed to connect cables to equipment up to 24kV and 250A. It provides ordering information and diagrams for these connectors.
Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors
This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.
Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical
Nexans Euromold MV Separable Connectors & Bushings - Interface C SymmetricalThorne & Derrick International
This document provides information on Euromold's medium voltage symmetrical separable connectors, including the Interface C connectors. It describes the 400LB elbow connector, 400TB and 440TB tee connectors, their design, specifications, standards, kit contents and ordering instructions. Euromold is a leading European manufacturer and distributor of prefabricated cable accessories for medium voltage energy distribution.CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...Thorne & Derrick International
High Voltage Cable Terminations (SWA) with CMP Zen Insulated Cable Glands & Cast Integral Earth Lug
CMP Zen Glands - Protect Against Short Circuit Earth Fault Currents
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (Supply)
CMP A324 Zen insulated aluminium cable glands are suitable for the cable termination of all low voltage and high voltage aluminium wire armoured (AWA) cables, indoor and outdoor with IP66 seal - CMP A324 Zen insulated aluminium cable glands feature CMP Cast Integral Earth Lug (CIEL) allowing the zoning of earth connections for earthed neutral systems.
CMP Zen Insulated Cable Glands - High Voltage Cable Termination with Brass or Aluminium Cable Glands
In the power generation industry unless special measures are taken to both segregate LV-HV cables in accordance with wiring regulations, and also isolate the metallic cable armour from running in continuous contact throughout the whole of the earthing system, interference or electrical noise would spread throughout the plant. CMP Zen Insulated cable gland system allows cables to be earthed at one end only - single point earthing - and insulated at the field end. Insulated Zen cable glands are available to ensure that no contact is made between the earth circuit carried through the cable armour and the low-high voltage electrical enclosure which the cable enters. CMP Zen Insulated cable glands permit electrical design engineers to implement safe earthing systems to deal with :
*Cross Talk Noise Reduction
*Electrical Separation of Main Earths
*Earth Fault Segregation
*Fault Current Reduction with Series Cable Resistance
*Electrical Noise Reduction in Instrument Cables
*Circulating Current Production in Single or 3 Core High Voltage Cables
CMP Zen Insulated Cable Glands - CMP A324 & A348
CMP Zen Insulated cable glands are suitable for use with all aluminium wire armoured (AWA) cables providing an IP66 environmental seal on the cable outer sheath. CMP A324 Zen glands feature Cast Integral Earth Lug (CIEL) suitable for high voltage power cable systems where a high level of protection against fault currents is required - CMP's unique cable glanding concept effectively insulates the gland and cable armour from the electrical equipment eliminating circulating currents. CMP Zen A324 cable gland is usually installed at the supply end of the cable and Zen A348 cable gland at the load end - suitable for 3.3kV, 6.6kV, 11kV and 33kV single core AWA high voltage power cable glanding.
Pearl broucher
This document provides information on various types of brass cable glands and fittings produced by The Pearl International, including:
- Type A1/A2 cable glands that provide IP66 protection and single displacement sealing for unarmored cables
- BW cable glands for armored cables that provide mechanical retention and electrical continuity via a three-part armor lock
- Double compression glands that provide IP66 protection and seal both the inner and outer sheaths of steel wire armored cables
- Specifications, materials, sizes, temperature ratings, and accessories are provided for each type.
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...Thorne & Derrick International
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits that provide electrical continuity across cable joints, along with accepted cable diameters and copper cord lengths. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braids, and copper braid options for providing earth continuity and fault current paths. Technical support contact information is provided at the end.3M Constant Force Springs - 3M Scotch Electrical Tapes
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits (AC kits) that provide electrical continuity across cable joints for armoured cables. It also lists constant force springs, earth bonding kits, copper braid, and electrical shielding braid that can be used for bonding armour wires and providing fault current paths and shielding. Technical support contact information is provided at the end.
3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...
3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...Thorne & Derrick International
This document provides information on various earthing kits and components for electrical joints and terminations. It describes 3M armour continuity kits that provide electrical continuity across cable joints, along with accepted cable diameters and copper cord lengths. It also lists constant force springs, earth bonding kits, electrical shielding and grounding braids, and copper braid options for providing earth continuity and fault current paths. Technical support contact information is provided at the end.3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...Thorne & Derrick International
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Grounding & Earth Braid Electrical TapesPrysmian BICC BICON Cable Glands - Catalogue
This document provides an introduction and overview of Bicon cable glands manufactured by Prysmian Group. It discusses the company's extensive experience in producing cable glands and accessories and its comprehensive product ranges for both industrial and hazardous applications. The document includes sections on low smoke zero halogen materials, deluge testing, ingress protection indexing, and guides for selecting the appropriate industrial or hazardous area cable gland.
Similar to CMP BW50S LSF Brass Cable Gland (Zero Halogen) 38.1-50.1mm (20)
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...
Prysmian (BICON) Cable Glands for FP Cables - FP200, FP Plus, FP400, FP600 an...
Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...
Yamuna Infra & Technology Pvt. Ltd. is a leading manufacturer of Heat Shrinka...
3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...
3M Earthing Kits & Constant Force Springs | AKBAR TRADING EST. - mail@akbart...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold 158LR Screened Separable Connectors 200 Series up to 250A 24k...
Nexans Euromold Interface A 200 Series Screened Cable Connectors
Nexans Euromold Interface A 200 Series Screened Cable Connectors
Nexans Euromold MV Separable Connectors & Bushings - Interface A
Nexans Euromold MV Separable Connectors & Bushings - Interface A
Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors
Nexans Euromold Interface C 400 Symmetrical Series Cable Connectors
Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical
Nexans Euromold MV Separable Connectors & Bushings - Interface C Symmetrical
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
CMP Zen A324 Insulated Aluminium Cable Glands with Cast Integral Earth Lug (S...
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...
3M Armour Continuity Kits - 3M Scotch Electrical Shielding, Grounding & Earth...
3M Constant Force Springs - 3M Scotch Electrical Tapes
3M Constant Force Springs - 3M Scotch Electrical Tapes
3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...
3M Earth Bonding Kits SB 1 - SB4 - 3M Electrical Shielding, Grounding & Earth...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
3M Copper Cord Kits - 3M Armour Continuity Kits - 3M Electrical Shielding, Gr...
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Recently uploaded (20)
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
CMP BW50S LSF Brass Cable Gland (Zero Halogen) 38.1-50.1mm
- 1. CABLE GLAND AND CABLE CONNECTION SPECIALISTS CMP SOLO - LOW SMOKE & FUME - HALOGEN FREE PRODUCTS CMP BW SOLO LSF Industrial Cable Gland Kit TM Brass indoor cable gland kit for all types of SWA cable, providing mechanical cable retention, and electrical continuity via armour wire termination. The cable gland kit includes CMP SOLO LSF Shrouds. TECHNICAL DATA Type BW SOLO-Kit Up to & including size 25 - 2 cable glands, 2 locknuts, 2 earth tags & 2 LSF shrouds. Size 32 & above - 1 cable gland, 1 locknut, 1 earth tag & 1 LSF shroud. Cable Gland Kit Contents Design Specification BS6121 : 2005 Cable Gland Material Brass Continuous Operating Temperature -60º C to +150º C Cable Type Single Wire Armour Armour Clamping Two Part Armour Lock For Dimension Drawing See Page 77 CW SOLO LSF Industrial Cable Gland Kit Brass indoor and outdoor cable gland git for all types of SWA cable, providing environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention, and electrical continuity via armour wire termination. The cable gland kit includes CMP SOLO LSF shrouds and seals. TM TECHNICAL DATA Type CW SOLO-Kit Up to & including size 25 - 2 cable glands, 2 locknuts, 2 earth tags & 2 LSF shrouds. Size 32 & above - 1 cable gland, 1 locknut, 1 earth tag & 1 LSF shroud. Cable Gland Kit Contents Design Specification BS6121 : Part 1 : 1989, EN50262:1999 Cable Gland Material Brass Continuous Operating Temperature -60º C to +150º C Cable Type Single Wire Armour Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring For Dimension Drawing See Page 80 Note : Ferrule colour coded gold for ease of LSF identification. Cable Gland Selection Table BW SOLO Cable Metric Minimum Gland Entry Thread Size Thread Length CW SOLO Cable Bedding Diameter Max. Overall Cable Diameter Max. Ordering Reference LSF Shroud Reference Cable Bedding Diameter Max.- Overall Cable Diameter Ordering Reference LSF Armour Shroud Wire Ref. Diameter Min Max 20S/16 M20 15.0 - - - - 8.7 6.1 11.5 20S16CWLSF2RA LSF02 0.9 20S M20 10.0 11.7 16.1 20SBWLSF2RA LSF01 11.7 9.5 15.9 20SCWLSF2RA LSF04 0.9/1.25 20 M20 10.0 14.0 21.1 20BWLSF2RA LSF05 14.0 12.5 20.9 20CWLSF2RA LSF06 0.9/1.25 25 M25 10.0 20.0 27.4 25BWLSF2RA LSF07 20.0 18.2 26.2 25CWLSF2RA LSF09 1.25/1.6 32 M32 10.0 26.3 34.4 32BWLSF2RA LSF10 26.3 23.7 33.9 32CWLSF2RA LSF11 1.6/2.0 40 M40 15.0 26.3 42.4 40BWLSF2RA LSF12 32.2 27.9 40.4 40CWLSF2RA LSF15 1.6/2.0 50S M50 15.0 38.2 50.1 50SBWLSF2RA LSF16 38.2 35.2 46.7 50SCWLSF2RA LSF18 2.0/2.5 50 M50 15.0 44.1 55.7 50BWLSF2RA LSF19 44.1 40.4 53.1 50CWLSF2RA LSF21 2.0/2.5 63S M63 15.0 50.0 62.4 63SBWLSF2RA LSF22 50.0 45.6 59.4 63SCWLSF2RA LSF23 2.5 63 M63 15.0 56.0 68.2 63BWLSF2RA LSF24 56.0 54.6 65.9 63CWLSF2RA LSF25 2.5 75S M75 15.0 62.0 76.8 75SBWLSF2RA LSF27 62.0 59.0 72.1 75SCWLSF2RA LSF28 2.5 75 M75 15.0 68.0 82.9 75BWLSF2RA LSF29 68.0 66.7 78.5 75CWLSF2RA LSF30 2.5/3.15 All dimensions in millimetres 97 www.cmp-products.com