Close the Loop ~ Recycled Products
•
2 likes•381 views
Close the Loop works with US manufacturers who produce high quality & unique recycled products from waste tires, plastic milk jugs & glass bottles. We are working to increase consumer confidence, awareness and demand for recycled content products and help grow markets. We strive to encourage people to view our waste as a valuable resource. Close the Loop offers many eco-friendly recycled products that you may be interested in using on your designs. Anything from our 100% recycled plastic, solid fencing and composite lumber, to mulches made of rubber and glass, and landscape timbers. Buying US-made recycled products from Close the Loop supports small, progressive, environmentally responsible product manufacturers who create innovative materials, recycled products and green building materials, and gain valuable LEED points.
Report
Share
Report
Share
Recommended
Plastic recycling starter
This document discusses plastics recycling. It begins by identifying the 7 main types of plastics using recycling codes. It then provides statistics on plastic waste, noting that only 7% was recycled in 2001. The document outlines reasons to recycle plastic, such as conserving oil and reducing emissions. It describes the mechanical recycling process where plastics are sorted, shredded, and remolded. Finally, it provides examples of local programs that have increased recycling rates through curbside collection of plastics.
Science
The document discusses the effects of plastics on the environment, benefits of plastics, and ways to recycle plastics. It notes that improperly disposed plastics have negative effects on both urban and natural environments by harming and killing animals and being non-biodegradable. However, plastics also provide benefits like lighter packaging that requires less energy to transport and plastic insulation that can reduce heat or cold loss by up to 70%. The document encourages recycling plastics into new products like plant pots, wallets, and home decorations.
how to renew plastic-wood cutting boards- (final)
This document provides instructions for renewing plastic and wood cutting boards. For plastic boards, it recommends soaking the board in bleach water, scrubbing it with a baking soda paste, and allowing it to dry fully. For wood boards, it suggests sanding deep grooves, washing with soap and water, sealing with mineral oil, and scrubbing with a vinegar solution to eliminate odors. Re-oiling wood boards monthly or when the color lightens helps preserve the board.
Where materials come from
The document discusses the most common materials - metal, plastic, glass, wood, and fabric. It provides details on where each material comes from: metal from metal ore dug from the ground, plastic from cellulose sources like recycled paper or plants, glass from sand which gives it different properties, wood from trees, and fabric from natural fibers like cotton, linen and wool or synthetic fibers made from materials like oil and coal.
The Growth Strategy: A change from a product-centric industry to a Customer E...
Our presentation at the International Wood Plastic Composite Conference, March 2016, Vienna, Austria.
The WPC decking global leader manufacturer already invest more in Marketing than in R&D. How much your company is investing in marketing? Do not be mistaken, WPC decking is neither a technical product nor a commoditty...Today, brand and image are equally, if not more important than products.
wpc products produce process
COOWIN GROUP is a manufacturer of wood-plastic composite (WPC) products located in Qingdao, China. The WPC production process involves mixing wood flour and plastic materials, granulating the mixture, extruding it to form profiles, and surface treating and packaging the finished products. Quality testing is conducted throughout the process to ensure strength, durability and safety of the WPC boards and panels. COOWIN GROUP produces WPC flooring and wall cladding panels for commercial and residential applications.
Why Wood Plastic Composite (WPC)?
Pluss Polymers now introduces Wood Plastics composites. Feels like wood but with best features of wood and plastics. Made from recycled wood and plastic, it is an environment friendly product adding to your LEED points! It is resistant to rot, moisture, termite, warping and cracking. It has various applications like decking, railing, fencing, wall cladding, garden furniture, louvers, pergola, etc. Available in different color and finishes, it gives your home a superior aesthetic look with very low maintenance. "
Highly Profitable Business Industries to Start
NIIR PROJECT CONSULTANCY SERVICES (NPCS) offering integrated technical consultancy services. Its various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, Cost and Revenue, Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Investment Opportunities, Preparation of Project Profiles / Pre-Investment and Pre-Feasibility Studies, Market Surveys / Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Section of Plant /Process / Equipment, General Guidance, Technical and Commercial Counseling for setting up new industrial projects.
Project report, profile covered in this Issue:
Feasibility Study for Establishment of Reclaimed Rubber Sheet from Waste Tyre Production plant
Detailed Project Report on Silicone Emulsion Manufacturing plant
Techno-Economic Feasibility report on Curcumin from Turmeric Processing unit
Feasibility Study for Establishment of Vitrified Floor Tiles Manufacturing plant
Feasibility Study for Establishment of Precipitated Calcium Carbonate Processing unit
Detailed Project Report on Mild Steel Welding Electrode Production plant
Techno-Economic Feasibility report on HDPE/PP Woven Sacks (Using Circular Looms) Manufacturing plant
Feasibility Study for Establishment of Soya Bean Oil, Soya Paneer & Soya Extract Processing unit
Feasibility Study for Establishment of Polyurethane Sheets & Pipes Manufacturing plant
Detailed Project Report on Amylase Production plant
Techno-Economic Feasibility report on Maize/ Corn Starch, Sorbitol & Dextrose Processing unit
Feasibility Study for Establishment of High Temperature Thinner Manufacturing plant
Detailed Project Report on Wood Plastic Composite Production plant
Techno-Economic Feasibility report on PVC Banners (Frontlit, Backlit & Vinyl) Manufacturing plant
Tags
best business to start with little money, Best New Small Business Ideas and Opportunities to Start, best small and cottage scale industries, Business Idea's under:- 1Lakh, 5 lakh, 10 Lakh, 50 lakh, Business Ideas with very low Investment India, Business Opportunities in India (With Low Investment, Highest Rate Of return), Business Startup Investors, Catch The Opportunity - Start your business today, Detailed Project Report, Download free project profiles, Feasibility report, Free Project Profiles, Good Small Business Ideas with Low Investment, High ROI business idea india manufacturing business with good ROI, Highly Profitable Business Ideas, How to Start a Project?, How to Start a Small Business, How to start a successful business, How to Start Your Business, Industrial Project Report, Low Cost Business Ideas, manufacturing business ideas with low investment, Manufacturing Business: Profitable Small Scale Industry,
Recommended
Plastic recycling starter
This document discusses plastics recycling. It begins by identifying the 7 main types of plastics using recycling codes. It then provides statistics on plastic waste, noting that only 7% was recycled in 2001. The document outlines reasons to recycle plastic, such as conserving oil and reducing emissions. It describes the mechanical recycling process where plastics are sorted, shredded, and remolded. Finally, it provides examples of local programs that have increased recycling rates through curbside collection of plastics.
Science
The document discusses the effects of plastics on the environment, benefits of plastics, and ways to recycle plastics. It notes that improperly disposed plastics have negative effects on both urban and natural environments by harming and killing animals and being non-biodegradable. However, plastics also provide benefits like lighter packaging that requires less energy to transport and plastic insulation that can reduce heat or cold loss by up to 70%. The document encourages recycling plastics into new products like plant pots, wallets, and home decorations.
how to renew plastic-wood cutting boards- (final)
This document provides instructions for renewing plastic and wood cutting boards. For plastic boards, it recommends soaking the board in bleach water, scrubbing it with a baking soda paste, and allowing it to dry fully. For wood boards, it suggests sanding deep grooves, washing with soap and water, sealing with mineral oil, and scrubbing with a vinegar solution to eliminate odors. Re-oiling wood boards monthly or when the color lightens helps preserve the board.
Where materials come from
The document discusses the most common materials - metal, plastic, glass, wood, and fabric. It provides details on where each material comes from: metal from metal ore dug from the ground, plastic from cellulose sources like recycled paper or plants, glass from sand which gives it different properties, wood from trees, and fabric from natural fibers like cotton, linen and wool or synthetic fibers made from materials like oil and coal.
The Growth Strategy: A change from a product-centric industry to a Customer E...
Our presentation at the International Wood Plastic Composite Conference, March 2016, Vienna, Austria.
The WPC decking global leader manufacturer already invest more in Marketing than in R&D. How much your company is investing in marketing? Do not be mistaken, WPC decking is neither a technical product nor a commoditty...Today, brand and image are equally, if not more important than products.
wpc products produce process
COOWIN GROUP is a manufacturer of wood-plastic composite (WPC) products located in Qingdao, China. The WPC production process involves mixing wood flour and plastic materials, granulating the mixture, extruding it to form profiles, and surface treating and packaging the finished products. Quality testing is conducted throughout the process to ensure strength, durability and safety of the WPC boards and panels. COOWIN GROUP produces WPC flooring and wall cladding panels for commercial and residential applications.
Why Wood Plastic Composite (WPC)?
Pluss Polymers now introduces Wood Plastics composites. Feels like wood but with best features of wood and plastics. Made from recycled wood and plastic, it is an environment friendly product adding to your LEED points! It is resistant to rot, moisture, termite, warping and cracking. It has various applications like decking, railing, fencing, wall cladding, garden furniture, louvers, pergola, etc. Available in different color and finishes, it gives your home a superior aesthetic look with very low maintenance. "
Highly Profitable Business Industries to Start
NIIR PROJECT CONSULTANCY SERVICES (NPCS) offering integrated technical consultancy services. Its various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, Cost and Revenue, Pre-feasibility study, New Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Investment Opportunities, Preparation of Project Profiles / Pre-Investment and Pre-Feasibility Studies, Market Surveys / Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Section of Plant /Process / Equipment, General Guidance, Technical and Commercial Counseling for setting up new industrial projects.
Project report, profile covered in this Issue:
Feasibility Study for Establishment of Reclaimed Rubber Sheet from Waste Tyre Production plant
Detailed Project Report on Silicone Emulsion Manufacturing plant
Techno-Economic Feasibility report on Curcumin from Turmeric Processing unit
Feasibility Study for Establishment of Vitrified Floor Tiles Manufacturing plant
Feasibility Study for Establishment of Precipitated Calcium Carbonate Processing unit
Detailed Project Report on Mild Steel Welding Electrode Production plant
Techno-Economic Feasibility report on HDPE/PP Woven Sacks (Using Circular Looms) Manufacturing plant
Feasibility Study for Establishment of Soya Bean Oil, Soya Paneer & Soya Extract Processing unit
Feasibility Study for Establishment of Polyurethane Sheets & Pipes Manufacturing plant
Detailed Project Report on Amylase Production plant
Techno-Economic Feasibility report on Maize/ Corn Starch, Sorbitol & Dextrose Processing unit
Feasibility Study for Establishment of High Temperature Thinner Manufacturing plant
Detailed Project Report on Wood Plastic Composite Production plant
Techno-Economic Feasibility report on PVC Banners (Frontlit, Backlit & Vinyl) Manufacturing plant
Tags
best business to start with little money, Best New Small Business Ideas and Opportunities to Start, best small and cottage scale industries, Business Idea's under:- 1Lakh, 5 lakh, 10 Lakh, 50 lakh, Business Ideas with very low Investment India, Business Opportunities in India (With Low Investment, Highest Rate Of return), Business Startup Investors, Catch The Opportunity - Start your business today, Detailed Project Report, Download free project profiles, Feasibility report, Free Project Profiles, Good Small Business Ideas with Low Investment, High ROI business idea india manufacturing business with good ROI, Highly Profitable Business Ideas, How to Start a Project?, How to Start a Small Business, How to start a successful business, How to Start Your Business, Industrial Project Report, Low Cost Business Ideas, manufacturing business ideas with low investment, Manufacturing Business: Profitable Small Scale Industry,
Close the loop_presentation_2012
Close the Loop collects recyclable waste materials and manufactures new products from them in the US. They organize community events to encourage recycling and purchasing recycled products. According to the EPA, large amounts of plastics, glass, and tires are generated as waste in the US each year, but recycling rates remain low. Close the Loop turns these materials into fencing, garden items, playground surfaces and more. They believe manufacturing recycled products in the US creates jobs and benefits the economy and environment long-term by using waste as a resource instead of trash.
Utilization of plastics in flexible pavements
Plastic has been most inculcating material in our modern world. Plastic has a major problem as it cannot be disposed in the environment safely so many ideas has made up to decrease the pollution caused due to plastic. It has been remoulded into useful products to decrease its disposal problem. One of the methods of reforming plastic into useful product is our “PLASTIC PAVEMENTS”.
Plastic pavement has been formed from different plastic. It has only two materials plastic and sand. Plastic is best in it use for moisture resistant. It is mixed with sand to give good compressive strength. Plastic pavement is used for light weight traffic. The pavements manufactured possess the properties such as neat and even finishing
Aadrsh kumar tiwari bbau
Polymer waste management: Introduction, world of polymer, recycling , environmental issues, waste management
Plastic recycling
Plastic waste is a growing problem, with an estimated 3 million tonnes produced annually in India alone. Currently only 7% is recycled. Various types of plastics are identified by numbers 1-7 based on their chemical makeup. The top two recycled types are PETE (1) and HDPE (2) which can be used to make new bottles and other products. While recycling saves energy and resources over producing new plastic, it also faces challenges like cost, contamination between types, and potential health issues from recycled materials. Researchers are working on ways to use waste plastic as a fuel source without pollution as an alternative to dumping in landfills. Individual actions like refusing plastic straws and reusing containers can help reduce plastic waste
Production of Conventional Fuel from Plastic Waste and Biomass by Pyrolysis
The document discusses the production of fuel from plastic waste and biomass via pyrolysis. It begins with background information on plastics and biomass. The methodology section describes the experimental setup for pyrolyzing plastic alone or with biomass. Various plastic types and biomass were pyrolyzed alone and in combination. The liquid fuel yield was highest for mixtures containing biomass, ranging from 64-69.6% yield. The quality of the obtained fuels was analyzed and found to be similar to diesel. Residual solids from biomass pyrolysis were converted to nano-silica. Thus, pyrolysis can convert waste plastic and biomass into useful fuels and materials while addressing environmental issues.
System Dynamics Model of Recycling Scenarios
This document summarizes a presentation on system dynamics modeling of plastics recycling scenarios. It finds that increased plastics recycling could provide environmental benefits but price variability and volume constraints limit potential for new plastics processing in Minnesota. Rigid plastics and film plastics represent good opportunities for higher diversion from landfills. The presentation included system diagrams, data on plastics recycling rates and prices, and preliminary results from recycling capacity scenarios modeling changes over time.
Plastic roads
This document discusses using waste plastic in road construction. Laboratory studies showed that mixing shredded plastic waste into bituminous mixes improves the properties of the mix. This provides a solution for plastic disposal while enhancing the strength and durability of roads. The process involves collecting, cleaning, shredding plastic waste then mixing it into hot bitumen or heated aggregates. Roads constructed with plastic waste had higher stability, binding and strength while being more resistant to rutting, stripping and water seepage. This plastic road model was successfully implemented on major roads in Bangalore.
recycling of plastic (1).pptx
Plastic recycling is important for the environment. The process involves collecting waste plastic, sorting it by type, washing it, shredding it, further separating it, and compounding it. Recycling plastic provides significant benefits like conserving energy, reducing petroleum and CO2 emissions, and decreasing landfill use. Common plastics that are recycled include PET, PVC, HDPE, LDPE, and PS.
Development of Wood-Plastic Composite at Dedan Kimathi University of Technolo...
Disposal of plastics and other solid wastes has been a major problem in Kenya. Most of these wastes can be
recycled through various ways and methods to produce new products. Plastics can be combined with sawdust to
develop composite materials for applications such as in building. In this project, a wood-plastic composite
(WPC) was developed from sawdust and plastic solid wastes.
The composite bore the advantages of both wood and plastics which can be applied in various sectors including
interior design work and in automotive among others, thereby curbing the problem of garbage accumulation in
the environment. The project provides eco-friendly solutions by making best use of the available resources
(wood and plastic resins) thus, finding sustainable solutions to the problem of limited waste dumping sites and
deforestation in the country. The composites were made from PP and HDPE thermoplastics and mahogany
sawdust obtained from our wood workshop in Dedan Kimathi University. From the tests carried out and results
obtained, it was found that, the composite has more advantages than the individual constituent materials.
Water absorption test revealed that all the samples took up water though not as much pronounced as for plain
sawdust. Additionally, the rate of water reduction was found to be excellent. They took less time to release the
absorbed water to the environment meaning that they can be applied in humid or wet environ. The composite
samples were easy to machine since they were easily shaped using a handsaw.
Prevention Of Plastic Pollution And Comparison With Paper
What is Plastic Waste and How to harmful effects of Plastics in nature all things explain. How to manage Plastic Waste Management and explain with case study.
Recycling of PET waste bottle to textile valuable product.
As PET bottle is non biodegradable and cause many several major problem to nature to overcome of it such project are every useful.
Polymer Recycling & Uses
Here we will see the classifications, Collection, Handling & Sorting, different methods of sorting of plastics
About Biodegradable polymers, how to use it and reuse it
Best Eco Friendly Products, Projects & Ideas for Startups
Best Eco Friendly Products, Projects & Ideas for Startups. Profitable Business Ideas on Biodegradable Products, Recyclable, Disposable, Eco-Friendly Plastics, Bio Plastics, Compostable, Biodegradable Packaging.
Biodegradable waste includes any organic matter in waste which can be broken down into carbon dioxide, water, methane or simple organic molecules by micro-organisms and other living things by composting, aerobic digestion, anaerobic digestion or similar processes.
See more
https://niir.org/profile-project-reports/profiles/biodegradable-products-recyclable-disposable-eco-friendly-plastics-bioplastics-compostable-biodegradable-packaging-for-food-products-bio-based-polymers-oxo-biodegradable-plastics-bio-nanocomposites-using-maize-corn-sugarcane-bagasse/z,,5a,0,a/index.html
Contact us
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Sherin peter
The document provides an overview of polymers, their history, and influence on daily life. It discusses how polymers are formed from monomers and lists major polymer discoveries from the 1820s to present. Polymers have widespread applications in construction, households, transportation, sports, agriculture, medicine, and more due to properties like strength, light weight, durability, and versatility. While polymers provide advantages, issues like non-biodegradability and waste disposal must be addressed. Future solutions include biodegradable polymers that break down naturally.
Say no to plastics
Plastics are polymers that are versatile, durable and inexpensive but also pose environmental challenges. They are non-biodegradable and accumulate as waste, polluting land and oceans. While recycling reduces environmental impacts, plastics must often be of identical composition to mix efficiently during recycling. Individual actions like reducing single-use plastics, reusing materials, and choosing recyclable packaging can help address the growing problem of plastic waste. The document examines both the benefits of plastics and initiatives people can take to protect the environment from plastic pollution.
Plastic impacts on the natural Environment
The document provides an overview of plastics, including their properties, types, production, uses, and environmental impacts. It discusses how plastics are polymers made from petrochemicals and can be thermoplastics or thermosets. The major types of plastics like polyethylene, PVC, and polystyrene are described. The document also outlines the positive aspects of plastics but notes they are not biodegradable and can pollute land, water, and air when discarded. Plastic waste is a growing problem and poses health risks to both wildlife and humans. Ways to reduce plastic pollution through refuse, reduce, reuse, and recycle strategies are suggested.
Single use plastics in agriculture
This document discusses single-use plastics in agriculture. It explains that plastics are commonly used in agricultural applications such as mulch films, irrigation tubing, and greenhouse coverings. While plastics provide benefits to agriculture, their disposal poses environmental issues. The document then summarizes various technological options for recycling and reusing agricultural plastics, such as thermal depolymerization and heat compression. It concludes that recycling agricultural plastics is an efficient way to reduce environmental impacts and that educational programs can promote better plastic waste disposal practices.
Utilization of waste plastic in manufacturing of bricks
The document describes a study on utilizing waste plastic to manufacture bricks. Plastic waste is collected from various sources and mixed with cement and sand. The mixture is burned at 90-110 degrees Celsius to melt and bind the materials. The resulting substance is molded into brick shapes. Tests on the plastic bricks show they are similar in size, shape, color and hardness to traditional bricks. They also show no efflorescence or breakage when sounded. The bricks help reduce environmental pollution from plastic waste and lower overall construction costs. Further research is suggested to use plastic bricks in partitions, benches and tracks as alternatives to traditional materials.
plastic_waste_awareness_ppt_1.pdf
This document provides information on plastic waste reuse, recycling, and disposal with an emphasis on single-use plastics. It defines plastics as petroleum products made of hydrocarbons that are non-biodegradable. It classifies plastics as thermosetting or thermoplastic and lists the most commonly used plastics. The document discusses single-use plastic products, plastic waste generation rates in India, the impacts of plastic pollution, and the government's Plastic Waste Management Rules. It provides responsibilities for local bodies, waste generators, and outlines innovative technologies for plastic waste disposal and management best practices to implement.
Plasticwastemanagement 130221045437-phpapp02
#1 INTRODUCTION-The term “plastics” includes materials composed of various elements such as carbon, hydrogen, oxygen, nitrogen, chlorine, and sulphur.
Plastics are macromolecules, formed by polymerization and having the ability to be shaped by the application of reasonable amount of heat and pressure or any other form of forces.
It is one of the few new chemical materials which pose environmental problem.
Polyethylene, polyvinyl chloride, polystyrene is largely used in the manufacturing of plastics.
##2Rapid population growth, urbanization and industrial growth have led to severe problem of waste generation in urban centres.
The waste quantities increased from 46 million tones in 2001 to 65 million tones in 2010.
Report says that per capita per day production will increase to 0.7 kg in 2050.
The characteristics of waste depends on various factors such as food habits, traditions, lifestyle, climate etc.
for more contect
2018 Annual Benefit Report for Close the Loop Company
Close the Loop Company is a Pennsylvania Benefit Corporation, offering recycled products: plastic lumber posts, glass mulch, rubber landscape timbers. Give & Take Day
Brodhead Creek Heritage Center at ForEvergreen Nature Preserve
Brodhead Creek Heritage Center at ForEvergreen Nature Preserve is a joint effort by: The Brodhead Watershed Association and Pocono Heritage Land Trust in a successful public-private partnership with Stroud Township
More Related Content
Similar to Close the Loop ~ Recycled Products
Close the loop_presentation_2012
Close the Loop collects recyclable waste materials and manufactures new products from them in the US. They organize community events to encourage recycling and purchasing recycled products. According to the EPA, large amounts of plastics, glass, and tires are generated as waste in the US each year, but recycling rates remain low. Close the Loop turns these materials into fencing, garden items, playground surfaces and more. They believe manufacturing recycled products in the US creates jobs and benefits the economy and environment long-term by using waste as a resource instead of trash.
Utilization of plastics in flexible pavements
Plastic has been most inculcating material in our modern world. Plastic has a major problem as it cannot be disposed in the environment safely so many ideas has made up to decrease the pollution caused due to plastic. It has been remoulded into useful products to decrease its disposal problem. One of the methods of reforming plastic into useful product is our “PLASTIC PAVEMENTS”.
Plastic pavement has been formed from different plastic. It has only two materials plastic and sand. Plastic is best in it use for moisture resistant. It is mixed with sand to give good compressive strength. Plastic pavement is used for light weight traffic. The pavements manufactured possess the properties such as neat and even finishing
Aadrsh kumar tiwari bbau
Polymer waste management: Introduction, world of polymer, recycling , environmental issues, waste management
Plastic recycling
Plastic waste is a growing problem, with an estimated 3 million tonnes produced annually in India alone. Currently only 7% is recycled. Various types of plastics are identified by numbers 1-7 based on their chemical makeup. The top two recycled types are PETE (1) and HDPE (2) which can be used to make new bottles and other products. While recycling saves energy and resources over producing new plastic, it also faces challenges like cost, contamination between types, and potential health issues from recycled materials. Researchers are working on ways to use waste plastic as a fuel source without pollution as an alternative to dumping in landfills. Individual actions like refusing plastic straws and reusing containers can help reduce plastic waste
Production of Conventional Fuel from Plastic Waste and Biomass by Pyrolysis
The document discusses the production of fuel from plastic waste and biomass via pyrolysis. It begins with background information on plastics and biomass. The methodology section describes the experimental setup for pyrolyzing plastic alone or with biomass. Various plastic types and biomass were pyrolyzed alone and in combination. The liquid fuel yield was highest for mixtures containing biomass, ranging from 64-69.6% yield. The quality of the obtained fuels was analyzed and found to be similar to diesel. Residual solids from biomass pyrolysis were converted to nano-silica. Thus, pyrolysis can convert waste plastic and biomass into useful fuels and materials while addressing environmental issues.
System Dynamics Model of Recycling Scenarios
This document summarizes a presentation on system dynamics modeling of plastics recycling scenarios. It finds that increased plastics recycling could provide environmental benefits but price variability and volume constraints limit potential for new plastics processing in Minnesota. Rigid plastics and film plastics represent good opportunities for higher diversion from landfills. The presentation included system diagrams, data on plastics recycling rates and prices, and preliminary results from recycling capacity scenarios modeling changes over time.
Plastic roads
This document discusses using waste plastic in road construction. Laboratory studies showed that mixing shredded plastic waste into bituminous mixes improves the properties of the mix. This provides a solution for plastic disposal while enhancing the strength and durability of roads. The process involves collecting, cleaning, shredding plastic waste then mixing it into hot bitumen or heated aggregates. Roads constructed with plastic waste had higher stability, binding and strength while being more resistant to rutting, stripping and water seepage. This plastic road model was successfully implemented on major roads in Bangalore.
recycling of plastic (1).pptx
Plastic recycling is important for the environment. The process involves collecting waste plastic, sorting it by type, washing it, shredding it, further separating it, and compounding it. Recycling plastic provides significant benefits like conserving energy, reducing petroleum and CO2 emissions, and decreasing landfill use. Common plastics that are recycled include PET, PVC, HDPE, LDPE, and PS.
Development of Wood-Plastic Composite at Dedan Kimathi University of Technolo...
Disposal of plastics and other solid wastes has been a major problem in Kenya. Most of these wastes can be
recycled through various ways and methods to produce new products. Plastics can be combined with sawdust to
develop composite materials for applications such as in building. In this project, a wood-plastic composite
(WPC) was developed from sawdust and plastic solid wastes.
The composite bore the advantages of both wood and plastics which can be applied in various sectors including
interior design work and in automotive among others, thereby curbing the problem of garbage accumulation in
the environment. The project provides eco-friendly solutions by making best use of the available resources
(wood and plastic resins) thus, finding sustainable solutions to the problem of limited waste dumping sites and
deforestation in the country. The composites were made from PP and HDPE thermoplastics and mahogany
sawdust obtained from our wood workshop in Dedan Kimathi University. From the tests carried out and results
obtained, it was found that, the composite has more advantages than the individual constituent materials.
Water absorption test revealed that all the samples took up water though not as much pronounced as for plain
sawdust. Additionally, the rate of water reduction was found to be excellent. They took less time to release the
absorbed water to the environment meaning that they can be applied in humid or wet environ. The composite
samples were easy to machine since they were easily shaped using a handsaw.
Prevention Of Plastic Pollution And Comparison With Paper
What is Plastic Waste and How to harmful effects of Plastics in nature all things explain. How to manage Plastic Waste Management and explain with case study.
Recycling of PET waste bottle to textile valuable product.
As PET bottle is non biodegradable and cause many several major problem to nature to overcome of it such project are every useful.
Polymer Recycling & Uses
Here we will see the classifications, Collection, Handling & Sorting, different methods of sorting of plastics
About Biodegradable polymers, how to use it and reuse it
Best Eco Friendly Products, Projects & Ideas for Startups
Best Eco Friendly Products, Projects & Ideas for Startups. Profitable Business Ideas on Biodegradable Products, Recyclable, Disposable, Eco-Friendly Plastics, Bio Plastics, Compostable, Biodegradable Packaging.
Biodegradable waste includes any organic matter in waste which can be broken down into carbon dioxide, water, methane or simple organic molecules by micro-organisms and other living things by composting, aerobic digestion, anaerobic digestion or similar processes.
See more
https://niir.org/profile-project-reports/profiles/biodegradable-products-recyclable-disposable-eco-friendly-plastics-bioplastics-compostable-biodegradable-packaging-for-food-products-bio-based-polymers-oxo-biodegradable-plastics-bio-nanocomposites-using-maize-corn-sugarcane-bagasse/z,,5a,0,a/index.html
Contact us
Niir Project Consultancy Services
An ISO 9001:2015 Company
106-E, Kamla Nagar, Opp. Spark Mall,
New Delhi-110007, India.
Email: npcs.ei@gmail.com , info@entrepreneurindia.co
Tel: +91-11-23843955, 23845654, 23845886, 8800733955
Mobile: +91-9811043595
Website: www.entrepreneurindia.co , www.niir.org
Sherin peter
The document provides an overview of polymers, their history, and influence on daily life. It discusses how polymers are formed from monomers and lists major polymer discoveries from the 1820s to present. Polymers have widespread applications in construction, households, transportation, sports, agriculture, medicine, and more due to properties like strength, light weight, durability, and versatility. While polymers provide advantages, issues like non-biodegradability and waste disposal must be addressed. Future solutions include biodegradable polymers that break down naturally.
Say no to plastics
Plastics are polymers that are versatile, durable and inexpensive but also pose environmental challenges. They are non-biodegradable and accumulate as waste, polluting land and oceans. While recycling reduces environmental impacts, plastics must often be of identical composition to mix efficiently during recycling. Individual actions like reducing single-use plastics, reusing materials, and choosing recyclable packaging can help address the growing problem of plastic waste. The document examines both the benefits of plastics and initiatives people can take to protect the environment from plastic pollution.
Plastic impacts on the natural Environment
The document provides an overview of plastics, including their properties, types, production, uses, and environmental impacts. It discusses how plastics are polymers made from petrochemicals and can be thermoplastics or thermosets. The major types of plastics like polyethylene, PVC, and polystyrene are described. The document also outlines the positive aspects of plastics but notes they are not biodegradable and can pollute land, water, and air when discarded. Plastic waste is a growing problem and poses health risks to both wildlife and humans. Ways to reduce plastic pollution through refuse, reduce, reuse, and recycle strategies are suggested.
Single use plastics in agriculture
This document discusses single-use plastics in agriculture. It explains that plastics are commonly used in agricultural applications such as mulch films, irrigation tubing, and greenhouse coverings. While plastics provide benefits to agriculture, their disposal poses environmental issues. The document then summarizes various technological options for recycling and reusing agricultural plastics, such as thermal depolymerization and heat compression. It concludes that recycling agricultural plastics is an efficient way to reduce environmental impacts and that educational programs can promote better plastic waste disposal practices.
Utilization of waste plastic in manufacturing of bricks
The document describes a study on utilizing waste plastic to manufacture bricks. Plastic waste is collected from various sources and mixed with cement and sand. The mixture is burned at 90-110 degrees Celsius to melt and bind the materials. The resulting substance is molded into brick shapes. Tests on the plastic bricks show they are similar in size, shape, color and hardness to traditional bricks. They also show no efflorescence or breakage when sounded. The bricks help reduce environmental pollution from plastic waste and lower overall construction costs. Further research is suggested to use plastic bricks in partitions, benches and tracks as alternatives to traditional materials.
plastic_waste_awareness_ppt_1.pdf
This document provides information on plastic waste reuse, recycling, and disposal with an emphasis on single-use plastics. It defines plastics as petroleum products made of hydrocarbons that are non-biodegradable. It classifies plastics as thermosetting or thermoplastic and lists the most commonly used plastics. The document discusses single-use plastic products, plastic waste generation rates in India, the impacts of plastic pollution, and the government's Plastic Waste Management Rules. It provides responsibilities for local bodies, waste generators, and outlines innovative technologies for plastic waste disposal and management best practices to implement.
Plasticwastemanagement 130221045437-phpapp02
#1 INTRODUCTION-The term “plastics” includes materials composed of various elements such as carbon, hydrogen, oxygen, nitrogen, chlorine, and sulphur.
Plastics are macromolecules, formed by polymerization and having the ability to be shaped by the application of reasonable amount of heat and pressure or any other form of forces.
It is one of the few new chemical materials which pose environmental problem.
Polyethylene, polyvinyl chloride, polystyrene is largely used in the manufacturing of plastics.
##2Rapid population growth, urbanization and industrial growth have led to severe problem of waste generation in urban centres.
The waste quantities increased from 46 million tones in 2001 to 65 million tones in 2010.
Report says that per capita per day production will increase to 0.7 kg in 2050.
The characteristics of waste depends on various factors such as food habits, traditions, lifestyle, climate etc.
for more contect
Similar to Close the Loop ~ Recycled Products (20)
Production of Conventional Fuel from Plastic Waste and Biomass by Pyrolysis
Production of Conventional Fuel from Plastic Waste and Biomass by Pyrolysis
Development of Wood-Plastic Composite at Dedan Kimathi University of Technolo...
Development of Wood-Plastic Composite at Dedan Kimathi University of Technolo...
Prevention Of Plastic Pollution And Comparison With Paper
Prevention Of Plastic Pollution And Comparison With Paper
Recycling of PET waste bottle to textile valuable product.
Recycling of PET waste bottle to textile valuable product.
Best Eco Friendly Products, Projects & Ideas for Startups
Best Eco Friendly Products, Projects & Ideas for Startups
Utilization of waste plastic in manufacturing of bricks
Utilization of waste plastic in manufacturing of bricks
More from Close the Loop Company
2018 Annual Benefit Report for Close the Loop Company
Close the Loop Company is a Pennsylvania Benefit Corporation, offering recycled products: plastic lumber posts, glass mulch, rubber landscape timbers. Give & Take Day
Brodhead Creek Heritage Center at ForEvergreen Nature Preserve
Brodhead Creek Heritage Center at ForEvergreen Nature Preserve is a joint effort by: The Brodhead Watershed Association and Pocono Heritage Land Trust in a successful public-private partnership with Stroud Township
2017 Annual Benefit Report for Close the Loop Company
2017 Annual Benefit Report for Close the Loop Company, established in 2000. Close the Loop is working to increase consumer awareness & acceptance of recycled products made from waste tires, plastics and glass. Offering:
P l a s t i c P o s t s , G l a s s M u l c h ,
R u b b e r M u l c h & R u b b e r
L a n d s c a p e T i m b e r s ~
P r o u d l y M a d e i n t h e U S A
v i s i t u s :
w w w . c l o s e t h e l o o p . c o m
Pocono Heritage Land Trust ~ A Guide for Homeowners
A Guide for Homeowners who want to leave a legacy of conserving and protecting their land for future generations. For more information, contact us at www.phlt.org
Presentation 2017 King's College
Presentation for Global Landscapes Conference at King's College. Breaking Boundaries and Creating Connections for Innovation, Sustainability and Growth
Close the Loop ~ Fencing Brochure 2017
This document describes plastic post and rail fencing manufactured by Close the Loop Company. The fencing is made from both recycled and virgin plastic. It is aesthetically pleasing, durable, and requires little maintenance compared to wood fencing. Using recycled plastic reduces environmental impacts. The fencing will not rot, crack, peel or need painting like wood fences. It provides years of maintenance-free use.
2016 Annual Benefit Report for Close the Loop Company
Close the Loop Company held its 8th annual Give & Take Day event on Earth Day, where over 6000 pounds of goods worth tens of thousands of dollars were donated and received. The event helped reduce waste and kept items within the local community. The company also created a Google map of over 500 trails and open spaces in Monroe County to encourage outdoor activities. Close the Loop Company recycles waste materials like tires and plastics to make recycled products and has been in business for over 15 years.
Recycled Plastic Livestock and Vineyard Posts
Standard woodworking tools can be used to cut, staple or screw into the plastic fence. Insulators are not required for electric fence installation. Plastic posts are virtually solid and do not need timber or metal inserts. Perfect post for livestock, vineyards, barbed wire fencing or sign posts.
Wnt mfgjob updated
Waste Not Technologies manufactures fence posts from recycled plastic in Tobyhanna and Saylorsburg, Pennsylvania. They are seeking an entrepreneurial assistant to help operate manufacturing equipment, troubleshoot problems, and assist the owner/engineer at both plant locations. Candidates should send their resume to Patrick Kelley at pkelley@plasticfencing.us for consideration. Waste Not Technologies is a family owned business and maintains a drug and alcohol free workplace.
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...Close the Loop Company
The Sharing Economy ~ Why everyone should be borrowing, reusing, fixing or buying items secondhand to conserve our natural resources. Hold a FREE Give & Take Day!Presentation at King's College Global Landscapes Conference, by Close the Loo...
Presentation at King's College Global Landscapes Conference, by Close the Loo...Close the Loop Company
This presentation is for the King's College Global Landscapes Conference 2016, an Interdisciplinary Research Symposium. Conference Theme: The Art of Good Governance: Accountability, Responsibility, and Transparency, held April 20-21, 2016. Rita Lacey is Founder and President of Close the Loop Company, Pennsylvania’s 1st Benefit Corporation. In 2015, she has was awarded the Rose Schoch Award for environmental education. She was also awarded the Dept. of Interior’s “Take Pride in America” award for outstanding business at the White House in 2011.Close the Loop Presentation 2014 ESU Innovation Center
Close the Loop Company, founded in the Poconos in 2000, is a pioneer in offering creative & unique products made from recycled plastics, tires & glass bottles. Waste materials are turned into functional and durable products, bringing innovative ideas and new uses for materials to the marketplace. Recycled plastic fencing is made in Saylorsburg, PA from state-of-the-art recycling of milk jugs for plastic lumber, with material sourced from local townships in the Poconos. Waste tires are used to make rubber pavers and landscaping materials, and glass bottles are tumbled for use as decorative & vibrant glass mulch. Rita Lacey served 6 years on the Solid Waste Advisory Committee in Monroe County, PA. She proves that you can do well by doing good when you focus on a triple bottom line: people, planet and purpose. Her business, Close the Loop Company is a new type of business, called a "Benefit Corporation", which requires the business to have a positive effect on people and the planet as a top priority. For the past 6 years, Close the Loop has organized free community events like their "Give & Take Days" and "Website Building Workshops". More information online at www.closetheloop.com
Facebook: http://www.facebook.com/closetheloop
Twitter: https://twitter.com/closetheloop
Close the Loop Presentation at King's College 4/15/14
Close the Loop is an environmentally and socially focused company dedicated to reducing waste by offering US-made recycled plastic fencing/posts, glass mulch, rubber landscaping products (mulch, horse footing, landscape timbers, pavers), made from recycled waste tires, plastic milk jugs, glass bottles and other materials. The purpose of Close the Loop is to support the founding values of the company which are to reduce waste and plastic pollution by building markets and demand for recycled products and support our local community by organizing free give and take days, and website building workshops for unemployed and underemployed.
Global Landscapes Conference 2014, Presentation by Close the Loop Company
We only have finite resources on our planet and humans create products that do not break down, causing environmental problems. Benefit corporations pursue positive social and environmental impacts over profit maximization. Free workshops help unemployed start small businesses. Recycling our waste, making new things from it, and buying recycled products can help close the materials loop. However, plastic recycling rates remain low despite the large quantities of plastic waste generated. Turning waste into new materials like fencing or playground surfacing provides solutions.
New close the_loop_presentation_2013_prop
Close the Loop Company is a Pennsylvania Benefit Corporation focused on solving plastic waste problems. Plastic pollution is a major issue, with animals like albatrosses and fish ingesting and being killed by plastic. While recycling rates for plastic bottles have increased in the US, most plastic still ends up polluting the land and oceans. The company aims to create local manufacturing jobs by turning recycled plastics into new products like fencing and furniture. This approach provides both economic and environmental benefits by reducing waste and creating a market for recycled materials.
Waste Plastic Workgroup
This document proposes organizing a Plastic Waste Workgroup to address the growing issue of plastic waste. The Workgroup would bring together representatives from government, industry, and environmental groups to educate about and support solutions to barriers inhibiting increased recycling and use of recycled plastics. The proposed new non-profit organization would fund the Workgroup through grants and private funds, with the goal of increasing recycling and jobs while reducing plastic pollution. An extensive team from various sectors is listed to participate in the Workgroup.
RCC Scrap Tire Workgroup ~ Can we do the same with Plastic Pollution Issues?
We need to assemble a group of thinkers to solve the plastic pollution issues of today, which are more than twice the tire problem (in volume).The Resource Conservation Challenge (RCC) Scrap Tire Workgroup started in 2003 to solve the huge waste tire problems.
Close the Loop Catalog
Close the Loop is a company that sells recycled plastic and composite products made from recycled materials like plastic, glass, and rubber to help reduce waste. Their mission is to view waste as a resource and help complete the recycling loop by manufacturing and selling recycled products. They provide fencing, mulch, pavers and other products made from recycled materials to homes, businesses, and municipalities to promote increased recycling and reduce materials in landfills. They aim to make recycling more successful by processing collected waste into new recycled products.
Order form 2012 sheet1
Close the Loop, LLC is located at 773 Upper Middle Creek Rd in Kunkletown, PA and can be contacted by phone at 570.629.8414 or by fax at 570.213.4254. The document is an order form for Close the Loop that collects shipping and billing information as well as payment details to place an order. It requests the customer's shipping address, phone number, preferred payment method, credit card information, and email for order confirmation and tracking.
Plastic vs. Wood Fencing
Recycled Plastic Post & Rail fencing is made with recycled plastic materials that would have been destined for a landfill or incinerator. Using this raw material for durable fencing is far better than cutting down forests to make wooden fencing that only lasts a few years and requires constant maintenance.
More from Close the Loop Company (20)
2018 Annual Benefit Report for Close the Loop Company
2018 Annual Benefit Report for Close the Loop Company
Brodhead Creek Heritage Center at ForEvergreen Nature Preserve
Brodhead Creek Heritage Center at ForEvergreen Nature Preserve
2017 Annual Benefit Report for Close the Loop Company
2017 Annual Benefit Report for Close the Loop Company
Pocono Heritage Land Trust ~ A Guide for Homeowners
Pocono Heritage Land Trust ~ A Guide for Homeowners
2016 Annual Benefit Report for Close the Loop Company
2016 Annual Benefit Report for Close the Loop Company
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...
Presentation at King's College Global Landscapes Conference, by Close the Loo...
Presentation at King's College Global Landscapes Conference, by Close the Loo...
Close the Loop Presentation 2014 ESU Innovation Center
Close the Loop Presentation 2014 ESU Innovation Center
Close the Loop Presentation at King's College 4/15/14
Close the Loop Presentation at King's College 4/15/14
Global Landscapes Conference 2014, Presentation by Close the Loop Company
Global Landscapes Conference 2014, Presentation by Close the Loop Company
RCC Scrap Tire Workgroup ~ Can we do the same with Plastic Pollution Issues?
RCC Scrap Tire Workgroup ~ Can we do the same with Plastic Pollution Issues?
Recently uploaded
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
AI Transformation Playbook: Thinking AI-First for Your Business
I dive into how businesses can stay competitive by integrating AI into their core processes. From identifying the right approach to building collaborative teams and recognizing common pitfalls, this guide has got you covered. AI transformation is a journey, and this playbook is here to help you navigate it successfully.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Call8328958814 satta matka Kalyan result satta guessing
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Kirill Klip GEM Royalty TNR Gold Copper Presentation
Tesla Energy rEVolution And The Golden Age For Copper: Kirill Klip GEM Royalty TNR Gold Copper Presentation
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
Cover Story - China's Investment Leader - Dr. Alyce SU
In World Expo 2010 Shanghai – the most visited Expo in the World History
https://www.britannica.com/event/Expo-Shanghai-2010
China’s official organizer of the Expo, CCPIT (China Council for the Promotion of International Trade https://en.ccpit.org/) has chosen Dr. Alyce Su as the Cover Person with Cover Story, in the Expo’s official magazine distributed throughout the Expo, showcasing China’s New Generation of Leaders to the World.
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
DearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
IMG_20240615_091110.pdf dpboss guessing
Satta matka fixx jodi panna all market dpboss matka guessing fixx panna jodi kalyan and all market game liss cover now 420 matka office mumbai maharashtra india fixx jodi panna
Call me 9040963354
WhatsApp 9040963354
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Transport Solution
Recently uploaded (20)
AI Transformation Playbook: Thinking AI-First for Your Business
AI Transformation Playbook: Thinking AI-First for Your Business
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Call8328958814 satta matka Kalyan result satta guessing
Call8328958814 satta matka Kalyan result satta guessing
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Kirill Klip GEM Royalty TNR Gold Copper Presentation
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Cover Story - China's Investment Leader - Dr. Alyce SU
Cover Story - China's Investment Leader - Dr. Alyce SU
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Satta Matka Dpboss Kalyan Matka Results Kalyan Chart
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Sustainable Logistics for Cost Reduction_ IPLTech Electric's Eco-Friendly Tra...
Close the Loop ~ Recycled Products
- 6. …can be turned into Plastic Wood Fencing …can be turned into Plastic Wood Fencing compost bins, raised gardens, furniture, etc.
- 8. Positive Recycled HDPE Plastic Post & Rail Fencing Impact on Environment Vinyl Fencing ~ VOCs Negative Wooden Split-Rail in MFG & Disposal/ destroys forests Incinerating PVC High Low Maintenance
- 9. Attributes & Close the Loop Wood Fencing Vinyl Fencing Benefits: Recycled Plastic Fencing Durability/ Longevity ✔ X ✔ Low Maintenance ✔ X ✔ Aesthetically Pleasing ✔ ✔ ✔ Generates No VOC’s ✔ ✔ X
- 10. Plastic Recycling in the USA 2008 all plastic generated in 2008, 30 million tons recycled plastic bottles collected in 2008, 1.2 million tons, 4% all other recycled plastics collected (non HDPE or PET bottles), 3% Source: 2008 United States National Post-Consumer Plastics Bottle Recycling Report
- 12. …can be turned into a sparkling garden glass walkway or used in a gas fire pit
- 13. Tire piles litter our countryside No known decomposition rate:
- 14. Tires can be turned into playground surfacing, horse footing, rubber timbers & tiles…