Mapinfo - So sánh hệ tọa độ Gauss UTM VN 2000Huytraining
Hướng dẫn: Quang Thắng
home: https://www.facebook.com/HuyTraining
Link tham gia khóa học
http://www.huytraining.com/course/huong-dan-mapinfo-professional/?id=15
Download luận văn đồ án tốt nghiệp với đề tài: Đánh giá độ chính xác đo GPS động (PPK) trong công tác thành lập bản đồ địa hình, cho các bạn có thể tham khảo
Description Mechanical theory. In general, the "mechanical theory" is a term that refers to a geometric physics of, pre heat engine period, machines, those such as screw presses, pulleys, water wheels, wind mills, etc., defined by fundamental principles and limits of operation owing to the geometry of movement of the parts and the laws of force. This final chapter is devoted to explaining the concept of exergy, its connection with entropy, and where it is originated from. An exergy-based analysis is often incorrectly attributed to the second law only. The exergy concept originates from a combination of both the first and second laws. Exergy is an indicative of maximum theoretical work obtainable from a given quantity of heat at the reversible limit. Expressions are derived for the maximum theoretical work and efficiency of an engine whose thermal energy is supplied from fixed-temperature thermal reservoir(s), a hot stream, or fuel combustion. It is shown that the maximum efficiency may differ from one engine to another depending on the source of thermal energy. A relation is presented for estimating the chemical exergy of a hydrocarbon fuel as a function of its elemental composition. The limitation and the application area of the second law are discussed. Description Mechanical theory. In general, the "mechanical theory" is a term that refers to a geometric physics of, pre heat engine period, machines, those such as screw presses, pulleys, water wheels, wind mills, etc., defined by fundamental principles and limits of operation owing to the geometry of movement of the parts and the laws of force. This final chapter is devoted to explaining the concept of exergy, its connection with entropy, and where it is originated from. An exergy-based analysis is often incorrectly attributed to the second law only. The exergy concept originates from a combination of both the first and second laws. Exergy is an indicative of maximum theoretical work obtainable from a given quantity of heat at the reversible limit. Expressions are derived for the maximum theoretical work and efficiency of an engine whose thermal energy is supplied from fixed-temperature thermal reservoir(s), a hot stream, or fuel combustion. It is shown that the maximum efficiency may differ from one engine to another depending on the source of thermal energy. A relation is presented for estimating the chemical exergy of a hydrocarbon fuel as a function of its elemental composition. The limitation and the application area of the second law are discussed. Description Mechanical theory. In general, the "mechanical theory" is a term that refers to a geometric physics of, pre heat engine period, machines, those such as screw presses, pulleys, water wheels, wind mills, etc., defined by fundamental principles and limits of operation owing to the geometry of movement of the parts and the laws of force. Description Mechanical theory.
Mapinfo - So sánh hệ tọa độ Gauss UTM VN 2000Huytraining
Hướng dẫn: Quang Thắng
home: https://www.facebook.com/HuyTraining
Link tham gia khóa học
http://www.huytraining.com/course/huong-dan-mapinfo-professional/?id=15
Download luận văn đồ án tốt nghiệp với đề tài: Đánh giá độ chính xác đo GPS động (PPK) trong công tác thành lập bản đồ địa hình, cho các bạn có thể tham khảo
Description Mechanical theory. In general, the "mechanical theory" is a term that refers to a geometric physics of, pre heat engine period, machines, those such as screw presses, pulleys, water wheels, wind mills, etc., defined by fundamental principles and limits of operation owing to the geometry of movement of the parts and the laws of force. This final chapter is devoted to explaining the concept of exergy, its connection with entropy, and where it is originated from. An exergy-based analysis is often incorrectly attributed to the second law only. The exergy concept originates from a combination of both the first and second laws. Exergy is an indicative of maximum theoretical work obtainable from a given quantity of heat at the reversible limit. Expressions are derived for the maximum theoretical work and efficiency of an engine whose thermal energy is supplied from fixed-temperature thermal reservoir(s), a hot stream, or fuel combustion. It is shown that the maximum efficiency may differ from one engine to another depending on the source of thermal energy. A relation is presented for estimating the chemical exergy of a hydrocarbon fuel as a function of its elemental composition. The limitation and the application area of the second law are discussed. Description Mechanical theory. In general, the "mechanical theory" is a term that refers to a geometric physics of, pre heat engine period, machines, those such as screw presses, pulleys, water wheels, wind mills, etc., defined by fundamental principles and limits of operation owing to the geometry of movement of the parts and the laws of force. This final chapter is devoted to explaining the concept of exergy, its connection with entropy, and where it is originated from. An exergy-based analysis is often incorrectly attributed to the second law only. The exergy concept originates from a combination of both the first and second laws. Exergy is an indicative of maximum theoretical work obtainable from a given quantity of heat at the reversible limit. Expressions are derived for the maximum theoretical work and efficiency of an engine whose thermal energy is supplied from fixed-temperature thermal reservoir(s), a hot stream, or fuel combustion. It is shown that the maximum efficiency may differ from one engine to another depending on the source of thermal energy. A relation is presented for estimating the chemical exergy of a hydrocarbon fuel as a function of its elemental composition. The limitation and the application area of the second law are discussed. Description Mechanical theory. In general, the "mechanical theory" is a term that refers to a geometric physics of, pre heat engine period, machines, those such as screw presses, pulleys, water wheels, wind mills, etc., defined by fundamental principles and limits of operation owing to the geometry of movement of the parts and the laws of force. Description Mechanical theory.
Câu 1: Nguyên nhân cơ bản khiến chúng ta phải sử dụng nhiều phép chiếu đồ khác nhau là:
a. Do bề mặt Trái Đất cong b. Do yêu cầu sử dụng khác nhau
c. Do vị trí lãnh thổ cần thể hiện d. Do hình dáng lãnh thổ
Câu 2: Mặt phẳng chiều đồ thường có dạng hình học là:
a. Hình nón b. Hình trụ
c. Mặt phẳng d. Tất cả các ý trên
Câu 3: Cơ sở để phân chia thành các loại phép chiếu: phương vị, hình nón, hình trụ là:
a. Do vị trí lãnh thổ cần thể hiện b. Do hình dạng mặt chiếu
c. Do vị trí tiếp xúc mặt chiếu d. Do đặc điểm lưới chiếu
Câu 4: Cơ sở để phân chia mỗi phép chiếu thành 3 loại: đứng, ngang, nghiêng là:
a. Do vị trí tiếp xúc của mặt chiếu với địa cầu
b. Do hình dạng mặt chiếu
c. Do vị trí lãnh thổ cần thể hiện
d. Do đặc điểm lưới chiếu
https://www.dethimau.vn/
Chuyên đề Phương pháp Chinh phục Hình học không gian - Megabook.vnMegabook
Đây là Chuyên đề Phương pháp Chinh phục Hình học không gian của Megabook. Các em có thể tham khảo nhé!
------------------------------------------------------------------------------
Các em có thể tham khảo bộ sách hay của Megabook tại địa chỉ sau nhé ;)
http://megabook.vn/
Chúc các em học tốt! ^^
1. CHƯƠNG 10
SỬ DỤNG BẢN ĐỒ ĐỊA HÌNH
1. Định hướng bản đồ trên thực địa
- Định hướng bằng địa vật dạng tuyến: có thể dùng tuyến đường bộ,
đường sắt, tuyến kênh mương để định hướng bản đồ. Thực chất của phương
pháp này là mang bản đồ ra thực địa tại vị trí rõ nét của địa vật dạng tuyến,
xoay bản đồ sao cho hướng địa vật dạng tuyến trên bản đồ trùng với hướng
tương ứng của nó trên thực địa, ta sẽ được bản đồ quay đúng hướng của nó.
- Định hướng bằng địa bàn: Để định hướng, ta đặt trên bản đồ một địa bàn
sao cho đường nối bắc - nam của nó song song với hướng bắc - nam của
lưới ô vuông tọa độ trên bản đồ. Xoay bản đồ để kim địa bàn trùng với
đường nối bắc - Nam của địa bàn thì bản đồ sẽ quay đúng hướng.
2. 2. Xác định tọa độ điểm trên bản đồ
a. Xác định tọa độ địa lý ϕ, λ
a N N
a T T
ϕ ϕ ϕ
λ λ λ
= + ∆
= + ∆
b. Xác định tọa độ vuông góc X, Y
- cao phonghoµ b×nh
800600530
400
200
530
3002289
400
ΔY
ΔX
(X0, Y0)
A
XA = X0 +ΔX*Mbd
YA = Y0 +ΔY*Mbd
3. 3. Xác định chiều dài nằm ngang trên bản đồ
Để xác định chiều dài nằm ngang của một đoạn thẳng trên thực địa đã thu
nhỏ theo tỷ lệ bản đồ 1/M ta dùng thước thẳng khắc vạch milimét đo chiều
dài đoạn thẳng đó trên bản đồ là d rồi tính chiều dài đoạn đó trên thực địa
theo công thức: S= d.M
4. Xác định góc phương vị của một hướng trên bản đồ
A B
X
Bthùc
Btõ
α
thùcA
tõA
Để xác định góc phương vị của hướng AB
trên bản đồ ta chỉ cần kẻ qua điểm A đường
thẳng song song với một trong ba đường
kinh tuyến: kinh tuyến thực (kinh tuyến địa
lý), kinh tuyến từ, kinh tuyến trục (kinh
tuyến giữa) và dùng thước đo độ xác định
giá trị góc đo. Những góc phương vị còn
lại có thể xác định dựa vào sơ đồ định
hướng.
4. 5. Xác định độ cao của một điểm trên bản đồ
A
S2
S1
1
2
I
II
10
5
E
( ) ( )
1 2
1
1 2 1 2
. .
A II
E S E S
H H H
S S S S
= + = −
+ +
5. 6. Xác định độ dốc và đường có độ dốc cho trước trên bản đồ
h
i tg
S
α= =
I
II
α
S
i %
h
S
1 2
Ví d :ụ trên t b n đ t l 1/10.000, b ng phép n iờ ả ồ ỷ ệ ằ ộ
suy đ cao ta có Hộ 1 =17,3m, HII = 27,2; Chênh cao
tính đ c h = Hượ II – HI = 9,9m và đo đ c S = 5cmượ
;ta tính đ c đ d c i:ượ ộ ố
990
0.02 2%
. 5 10.000
h cm
i
SM cm
= = = =
×
6. 7. Vẽ mặt cắt theo một hướng đã cho trên bản đồ
17.0
16.0
15.4
15.6
16.0
17.0
18.0
18.0
17.0
16.0
15.0
41B 2 3 965 87 D
15
16
171819
1617
B D
7. 7. Vẽ mặt cắt theo một hướng đã cho trên bản đồ
17.0
16.0
15.4
15.6
16.0
17.0
18.0
18.0
17.0
16.0
15.0
41B 2 3 965 87 D
15
16
171819
1617
B D