China AutoBook 2018 Preview

ii
WELCOME! 
 
China is the world’s largest automobile market,
both in terms of production and consumption.
In 2017, the country produced and sold
approximately 25 million passenger cars, MPVs
and SUVs where sold domestically (year on year
growth of +2%), driven by increasing urbanization
and the associated rise in demand in the Tier 3
and Tier 4 cities.
This sales number account for more than half of
the vehicles sold in Asia, Oceania and Middle-East combined (40.7
million units).
China’s global share on new vehicle production has also been
increasing year after year from 3.5% in 2000 to more than 35%  
in 2017.
The government backed China Association of Automobile
Manufacturers (CAAM) is optimistic about future growth, especially in
the secor of electric vehicles, where China strives to become a leader
- not only in consumption, but also in design and manufacturing.
The key driver of sales was the reduction in value-added tax
(introduced in October 2015) on purchases of new cars with engines
of up to 1.6 liters. In 2015 and 2016, VAT was levied at 5 percent
instead of the normal 10 percent. The tax break was continued in
2017, but with a smaller reduction (7.5 percent).
China represents a massive opportunity for the auto industry and if
you want to learn more about it, then this e-book is the perfect place
to start.
Outsourcing, localization and business
development
The information was compiled from research of automotive
companies, organizations, industrial estates with the support of
business associates and is intended to support:
1) Business Development - managers who seek to identify
potential customers and sales opportunities in China’s
automotive industry.
2) Outsourcing – local and international commodity managers,
buyers who are looking to source automotive components from
China.
3) Localization – managers desiring to expand their market and
set up a footprint in China for distribution or local production.
Focus on contacts
To make your work easier, we have included QuickLinks to access
web sites, Google Maps locations and social media sites of the
featured companies and their representatives:
I am sure this book will give you lots of information and enable you to
do more business in China.
Bangkok, May 2018
 
Ulrich Kaiser 
Publisher

Chapter 1
Introduction
Photo: Beiqi

2017 experienced a general shift between the passenger car segments in the
People’s Republic of China. With growth of a good 13%, SUV sales showed above-
average expansion and totaled 10.3 million units, accounting for 42%of the entire
market. In contrast there were losses in the sales of basic cars (-2% to 11.8 million
units) and of MPVs (-17% to 2.1 million units). Domestic production accounts for
more than 90% of the total motor vehicle market share.
China is the world’s largest passenger car market, and also leads in registrations of
electric cars and plug-in hybrids. In 2017, 581,300 EVs were sold in China, 72 % more
than in 2016. The share of the overall market going to electric cars increased from 1.4%
in 2016 to 2.4%.
In 2017, the Chinese Government set a quota for EVs,
which obligates manufacturers to produce e-cars or
plug-in hybrids. From 2019 onwards, OEMs
will have to meet certain minimum targets
for the proportion of alternative
powertrains in production and
sales.
This will be controlled
through a complex system
of points. Any
manufacturer not
satisfying the requirements
will have to buy points from
other manufacturer or else
face ﬁnes.
Section 1
AT A GLANCE
1. The auto industry is highly protected by
the government through forced JV
structures for OEM car makers.
2. The preferred segments are sports utility
vehicle (SUVs), multipurpose vehicles
(MPVs) and small engine cars due to
government policies.
3. Domestic brands are gaining more
popularity.
4. A large part of the industry still relies
heavily on the import of technologies and
know-how.
5. Low vehicle penetration rate of about  
140 vehicles per 1,000 inhabitants versus
910 per 1,000 in the United States.
Introduction
Page 4

Audi in China consists of two companies in three locations: Audi
China in Beijing; FAW-Volkswagen (FAW-VW) in Changchun
(production and Audi sales division); and FAW-VW Foshan plant
(production started in 2013).
History of Audi in China
The foundation for the presence of the AUDI AG in China was laid in 1988. After
negotiations lasting one year, the ﬁrst joint venture agreement was signed with Chinese
First Automobile Works (FAW), based in the province of Jijin in Northeast China. This
was followed by another important milestone. In 1995 – the inclusion in the FAW-
Volkswagen joint venture, which is now the China FAW Group Corporation (FAW),
established in 1991.
AUDI AG has a 10% share in the joint venture.
Section 1
AT A GLANCE
1. AUDI AG is now represented in China by a
joint venture and a fully owned subsidiary.
2. The new plant in Foshan and the
expansion of the Changchun plant
increased Audi’s annual production
capacity in China to 700,000 vehicles
Audi
Page 8
Audi (China) Enterprise Management Co.,
Ltd.
3-6 ﬂoor, (Designer Building), Block B6, No.797
Inside Zhengdong Group Yard,
Chaoyang, Beijing, 100015
Tel: +86 10 6531 5008
Email: service@audi.cn
Carlo Dall’Angelo
Purchasing Manager
Reinhold Mueller
Manager
Kai Klostermann
Director Audi Tooling
Carlo Dall'Angelo
Supply Chain Manager

Audi China
Audi China was established in Beijing in 2009, as a fully owned
subsidiary of AUDI AG. The company coordinates business
cooperation between AUDI AG, the FAW Group, and Joint-Venture
FAW-Volkswagen. In addition, Audi China supports global activities of
AUDI AG, especially in Asia.
AUDI AG is now represented in China by a joint venture and a fully
owned subsidiary. Together with joint venture partners Volkswagen
and the Chinese company, First Automotive Works (FAW), Audi
produces in Changchun the Audi A4 L, Audi A6 L, Audi Q3, and Audi
Q5 models. The Audi A3 Sportback and the Audi A3 Saloon have been
being manufactured in Foshan since 2014. The A6 L and Audi A4 L
have an extended wheelbase and were developed especially for
China.
Audi China has about 600 employees. Their tasks include product
management, market research, support for the sales network, train-
the-trainer programs, and trend-scouting. The brand marketing team
organizes brand and driving events and operates Audi City, the first
digital showroom of Audi in Asia. They expect to open about 500
dealerships in China by 2017.
The new plant in Foshan and the expansion of the Changchun plant is
expected to increase Audi’s annual production capacity in China to
700,000 vehicles. Audi is the most fuel efficient premium vehicle in
China. Audi in 2012 over-met its weight-based Chinese fuel
consumption regulations by a larger margin than any other premium
brand. In 2013, Audi achieved a 20% reduction in the average fuel
consumption of its locally built models.
With the market introduction of the Audi Q3 and the Audi Q5, Audi is
the first manufacturer to equip every locally built model in China with
efficient start/stop technology and a brake energy recovery
(recuperation) system.
Production Coordination Asia Audi China teams develop tooling
suppliers in Asia, support the global AUDI AG logistics network, and
offer production ramp-up and planning services for China and
additional Asian locations. This includes the evaluation of production
scenarios as well as the implementation of new products at current
production facilities. The engineers work in close cooperation with
Joint-Venture FAW-Volkswagen and the global production teams of
AUDI AG.
Production
The production of automobiles by the joint venture in Changchun
includes the four major areas of car manufacturing: press shop, body
shop, paint shop and assembly. Audi’s annual production capacity at
FAW-Volkswagen in Changchun has been expanded in recent years to
450,000 automobiles. At present, the plant produces the models Audi
A4 L, Audi A6 L, Audi Q3 and Audi Q5. Production at the joint venture
meets the standards set by AUDI AG for all of the company’s global
plants. Audi had already brought ultra-modern automotive and
manufacturing technology such as laser welding and hot-wax flooding
to China in the late 1990s. And in 2012, the brand with the Four Rings
was the first car manufacturer to integrate lightweight components in
local production with the new Audi A6 L.
The FAW-Volkswagen plant completed in Foshan in southern China
produces the Audi A3 Sportback and the Audi A3 Sedan. It is the first
plant in China in which models are built on the basis of the new MQB
platform. The Audi facility in Foshan can be ramped up to a capacity
of between 150,000 and 200,000 automobiles per annum.
The flexible plant structure allows ongoing gradual capacity
expansion. Depending on the market, Audi will be able to expand its
total production capacity in China (Changchun and Foshan) to
700,000 automobiles per annum by 2018.
Page 9

Audi R&D Beijing
The Audi R&D Center Asia opened in Beijing in early 2013, and is part
of the technical development department of AUDI AG. The research
and development teams in Beijing are working on regional product
customization and product testing, closely related to customers in
Asia. Furthermore, the R&D teams ensure the integration of
innovations and trends from Asia into AUDI AG’s future global
products.
Currrent/recent models:
Volkswagen produces the models Audi A6 L, Audi A4 L, Audi Q5 and
Audi Q3 in Changchun in northern China. The joint venture plant in
Foshan in the south of China produces the Audi A3 Sportback and the
Audi A3 Sedan.
Review of 2018
The Sino-German auto joint venture FAW-Volkswagen Automotive
plans to roll out 16 new Audi models in China this year as sales of
Audi vehicles in China hit a new high in 2017, the company announced
Friday.
A record 595,288 Audi vehicles were sold in China last year, up 1.1
percent year-on-year. Among them, 545,000 were domestically made,
while 50,288 were imported.
Seeing the huge potential of the luxury car market in China, Audi plans
to launch 16 new models, including the AI-embedded A8L and the
new generation Q5L, in China this year. Its upcoming full size-SUV, the
Q8, will make its world debut in China this year.
Jing Qingchun, executive vice-general manager of the company's
Audi sales division, said Audi would consider the needs of Chinese
customers in its research and development.
Saad Metz
Executive Vice President R&D
Jian Jiang
Powertrain Management
Page 10

Section 2
Chinese OEMs
Page 11
The full version of the China AutoBook includes proﬁles of the following companies. 
You can order your subscription to China AutoBook here.

SAIC Fiat Powertrain Hongyan (SFH) is a joint venture
founded in 2007 by Saic-Iveco Commercial Vehicle
Investing Co., Ltd., Fiat Powertrain Technologies (FPT), and
Chongqing Heavy-Duty Vehicle Group (CHVG).
SFH is located in the Huang Mao Ping economic development district in Chongqing
municipality, which has advanced vehicle and components industries. The new SFH
factory is around 270,000 square meters and began production in October 2008. This
factory is planned to include highly automated product assembly lines and
manufacturing lines with superior logistics and component supply systems.
In addition to advanced power technologies introduced by SFH from FPT, the company
expects to reach an annual throughput of 200,000 diesel engine assemblies, of which
100,000 are designated for export. SFH has introduced advanced power technologies
from FPT. Additionally, SFH is implementing an integrated Q&EHS system, and has
successfully obtained the ISO14001:2004, OHSAS18001:2007 and the ISO/
TS16949:2009 certiﬁcates.
SFH currently provides three series of products,
which are CURSOR, NEF and F1. Each series
covers displacement ranging from 2.3L to 12.9L,
maximum power ranges from 71kw with 96HP to
353kw with 480HP, and maximum torque ranges
from 240Nm to 2200Nm, all of which will satisfy
the substantial power requirement of commercial
vehicles with heavy, medium, and light sizes,
construction equipment, marines, and power
generators.
Section 1
AT A GLANCE
1. Founded in 2007 and is based in
Chongqing.
2. One of the largest diesel engine
manufactures in China
3. Annual production volume of 200,000
engines/components, 100,000 of which
are for export.
SAIC Fiat Powertrain Hongyan
Page 13
SAIC Fiat Powertrain Hongyan
B07 Block, Huangmaoping,
Chongqing North New Zone, 401122
Tel: +86 23 6321 2888
Federico Bullo
CEO
Junwei Zhou
Senior Program Management Manager
Xuening Gao
Quality Director

Section 2
Chinese Tier 1 Suppliers
Page 14

Benteler Automotive provides development, production and
services worldwide. Currently the company is owned by the
fourth generation of its founding family.
They are a full-service supplier for practically all large vehicle manufacturers, offering
customized solutions for a broad range of products in the safety, environmental, and
efficiency sectors. Integrated lightweight construction is the main focus of their diverse
activities.
The Structures, Chassis, Modules, and Engine and Exhaust Systems Product Groups
and BENTELER Mechanical Engineering, make them one of the leading providers
worldwide. Beyond these spheres of competence, the joint venture BENTELER-SGL
develops, produces, and markets components based on carbon fiber-reinforced
compound materials (CFRP) for the automotive industry.
Within its Automotive sector it employs about 20,850 employees worldwide in 20
development and sales offices and has 70 factories in 29 countries, BENTELER
Automotive develops and produces ready-to-install modules, components, and parts for
body, chassis, and engine.
Section 1
AT A GLANCE
1. Leader in Automotive, Steel and
Distribution
2. German owned automotive parts
manufacturer
Benteler
Page 16
Shanghai BENTELER Huizhong Automotive
Company Ltd.
Shanghai: Plant (JV)
No.251 Wen Shui Road
200072 Shanghai
Tel: +86 2156 0377 71
Joyce Fang
CFO
Yew-Hee Koh
Exec Vice President Asia Pacific
Thomas Bunke
Vice President Operation Asia Pacific
Nick Borislavski
General Manager
Bobby li
Purchasing Director

Below are all BENTELER Automotive locations in China.
Click here for a list of all global Benteler locations.
BENTELER Automotive (Changshu) Co., Ltd.
Changshu: Plant
No.3 Dongzhou Road, Economic and technology zone
215513 Changshu, Suzhou City, Jiangsu Province
Tel: +86 512 5202 3019
Wuhu BENTELER-POSCO Automotive Co., Ltd.
Wuhu: Plant
NO. 6-8 Hongqi Road, Wuhu Economy&Technology Development
Zone
241009 Wuhu, Anhui
Tel: +86 553 566 6999
BENTELER Automotive (Chongqing) Co., Ltd.
ChongQing: Plant
No.886 HaiEr Road, Jiang Bei District
400026 Chong Qing
Tel: +86 23 6776 8100
BENTELER CAPP Automotive System (Changchun) Co., Ltd.
Changchun: Plant
No.588 Yumin Road
130103 Jilin Province, Changchun City
Tel: +86 431 8585 8418
Shanghai BENTELER Huizhong Automotive Company Ltd.
Shanghai: Plant (JV)
No.251 Wen Shui Road
200072 Shanghai
Tel: +86 2156 0377 71
BENTELER Automotive (Shanghai) Co.
Ltd.
(WOFE plant)
No.1688 HuaLong Road ,Qing Pu District
201708 Shanghai
Tel: +86 2139 7610 88
BENTELER Automotive (Fuzhou) Co., Ltd.
Xincheng Road, Qingkou Investment District
350119 Fuzhou
Tel: +86 591 2279 6969
Page 17

Section 2
Other European Tier 1 Suppliers
Page 18

Bridgestone (China) Investment operates as a subsidiary
of Bridgestone Corporation and Bridgestone operates
eight facilities in China including four tyre manufacturing
plants.
Bridgestone Corporation, headquartered in Tokyo, is the world’s largest tire and rubber
company. In addition to tires for use in a wide variety of applications, it also
manufactures a broad range of diversified products, which include industrial rubber and
chemical products and sporting goods. Its products are sold in over 150 nations and
territories around the world.
Bridgestone Asia Pacific Pte. Ltd. is the regional headquarters for the Company’s
operations in China and Asia Pacific. Located in Singapore, it oversees tire production,
sales facilities, and supplies its products to over 25 countries in the region. Bridgestone
Asia Pacific Pte. Ltd. plays a key role in facilitating this large and growing market which  
contributes significantly to the entire Bridgestone Group.
Section 1
AT A GLANCE
1. A subsidiary of Bridgestone, the world’s
largest tire and rubber company.
2. Their products that are available in China
include: Passenger Tires, Commercial
Tires, Industrial Tires, and more
Bridgestone
Page 20
Bridgestone (China) Investment Co., Ltd.
8/F, No.98 Huaihai Road,
Huangpu District, Shanghai, 200021
Tel: +86 21 6132 1888
Howe Yu
Director of Administration Division
(henry)
Product Engineer
Andy Li
General Products Procurement Manager
Sales Engineer

Bridgestone China products include:
Passenger Tires - POTENZA, TURANZA, ECOPIA, MY-02, B-
SERIES, DUELER, and product positioning.
ECOPIA Series - combines eco-friendly performance such as higher
fuel efficiency and safety. It allows for reduced rolling resistance,
which in turn enhances fuel efficiency. ECOPIA also reduces the
production of harmful carbon dioxide emissions that contribute to
global warming.
Commercial Tires - Light Trucks & Van Tires, Truck & Bus Tires.
Industrial Tires - Bridgestone has been developing a wide range of
tires for use in industrial machines including those for fork lifts, port
and terminal service tractors, straddle carriers and more. Our
products feature excellent wear, cut and puncture resistance, as
well as strong traction suitable for a variety of surfaces and
conditions.
Agricultural Tires - Bridgestone has developed farm tractor tires
that feature maximum traction and durability in tough conditions.
Technologies:
Run-Flat - With Run-Flat Technology tires, you can drive up to 50
miles (80 kilometers) at a speed of 50 mph (80 km/h) after an air loss
(ISO technical standards), allowing you to get to a convenient area to
see to the problem. And, because you don't need a spare tyre or
wheel, or a jack, Run-Flat technology tires allow vehicle manufacturers
to reduce resource usage.
Retread - Retreading involves removing used tyre treads and applying
freshly vulcanized new treads so that the body of the tyre can be
reused safely. Retreading not only helps to reduce the total cost of
tyres, but also makes a major environmental contribution in terms of
the more effective utilization of natural resources.
Bridgestone subsidiaries in China include:
Bridgestone (China) Investment Co., Ltd. - Manufacturing and
Sales Subsidiary
Bridgestone (Shenyang) Tire Co., Ltd. - Tyre Manufacturing Plant
Bridgestone (Tianjin) Tire Co., Ltd. - Tyre Manufacturing Plant
Bridgestone (Wuxi) Tire Co., Ltd. - Tyre Manufacturing Plant
Bridgestone (Huizhou) Tire Co., Ltd. - Tyre Manufacturing Plant
Bridgestone (China) Tire Assessment & Development Co., Ltd. -
Proving Ground
Bridgestone (China) Research & Development Co., Ltd.
Bridgestone China Educational Center - Training Center
The Shenyang plant was originally constructed in 1999 and was
Bridgestone Group’s first tire manufacturing plant in China. The plant
is ISO9002 and ISO14001 certified, with products meeting
international standards for quality assurance and environmental
management system, and operations that received good evaluations
on its production management systems respectively.
Page 21

Section 2
Other Japanese Tier 1 Suppliers
Page 22

Chapter 7
North American
Tier 1

AAM is a leading, global Tier-One automotive supplier of driveline and
drivetrain systems and related components for light trucks, SUVs,
passenger cars, crossover vehicles and commercial vehicles.
Globally, the company employs over 13,500 people, in more than 30
locations in over 13 countries. The company supplies a wide range of customers
including GM, Chrysler, Daimler, Volkswagen, Audi, Scania, Tata Motors, Audi, Harley-
Davidson, Mack Truck, John Deere, Mahindra Navistar and Nissan.
The company product range and products include:
Vehicle Architectures; Light Truck/SUV, Passenger Car/CUV, Passenger Car and
Commercial Vehicles
Driveline Systems; Rear Beam Axles, Rear Axle Systems, Front Axles, Driveshafts,
Multi-Piece Driveshafts, TracRite Axle Diﬀerentials, Torque Transfer Device, Electronic
Control Coupling, CZV Joints.
Drivetrain systems; Transfer Cases, Power Transfer Units, TracRite Transaxle &
Transfer Case Diﬀerentials.
Powertrain Components; Transmission/Transfer Case Components, Intake Manifolds,
Oil Pans, Bell Housings.
Chassis System Components; I-Ride Suspension Module and SmartBar Electronic
Stabilizer System.
Metal Formed Products; Power Transfer Unit/Transfer Case Components
Wheel Hubs & Spindles
Section 1
AT A GLANCE
1. US owned Automotive parts maker
2. Founded in 1994
3. Manufactures a wide range of automotive
products
AAM
Page 24
AAM Investment Management (Shanghai)
Co., Ltd.
Asia Headquarters & Engineering Center
Level 20 Mirae Asset, 166 Lujiazui Ring Road,
Shanghai, 200120
Email: aamasia@aam.com
Victor Feng
Senior Manager Manufacturing Engineering
David Morse
Director Product Engineering
Robert Dichterman
Director, Procurement & Supply Chain
Management
Haojie Guo
Manager, Direct Purchasing

Below is a list of American Axle locations
in China.
Click here for a complete and
comprehensive address list.
Asia Headquarters & Engineering Center
Co., Ltd.
Level 20 Mirae Asset, 166 Lujiazui Ring
Road, Shanghai, 200120
Co., Ltd., (Zhabei Office) & AAM
(Shanghai) Commercial & Trading Co.,
Ltd.
22F, Baohua Center, 355 West Guangzhong
Road, Zhabei District, Shanghai, 200072
Located in one of the leading business
regions on the continent, AAM Investment
Management (Shanghai) Co., Ltd is a wholly
owned company established by AAM to
serve as the company’s regional
headquarter in Asia. In addition, it also
houses an engineering center on site. AAM
Asia's regional headquarters is geared to
work with the growing base of Chinese
automobile manufacturers. Offering
engineering, purchasing and sales services,
our sales and engineering staff provides
creative, value-added driveline and
drivetrain solutions.
Changshu Manufacturing
16 Tonglian Road
Changshu Economic Development Zone
Changshu, Jiangsu 215537
Dedicated to precision engineered driveline
systems, AAM's Changshu facility is
situated in an industrial park near Shanghai.
The city of Changshu features one of the 10
largest ports in China, providing geographic
access to all vehicle manufacturers
throughout Asia.
Hefei-AAM Manufacturing
Hefei-AAM Plant 1
62 Shi Xin Road
Hefei Economic Development Zone
Hefei, Anhui 230601
Bradley Hartzell
Plant Manager
Hefei-AMM Plant 2
No. 9 Shanghai Road
Baohe Industrial District
Hefei, Anhui, 230051
Hefei AAM Automotive Driveline & Chassis
System Co., Ltd. (HAAC),is an AAM joint
venture with the JAC Group, that
manufactures rear beam axles, front axles,
power transfer units (PTUs), rear drive
modules (RDMs) and suspension modules
for passenger cars, sport utility vehicles
(SUVs) and multi-purpose vehicles (MPVs)
for the China market.
This joint operation is the second largest
commercial vehicle manufacturer in China
and is located approximately 400 kilometers
west of Shanghai, in the state level
economic development zone of Hefei, the
capital of Anhui Province, China.
25

Section 2
North American Tier 1 Suppliers
Page 26

The Hankook Tire Group is based in South Korea. It is the
seventh largest tire company in the world. Hankook Tire was
established in 1941, as the Chosun Tire Company. It was renamed to Hankook Tire
Manufacturing in 1968.
The Hankook Group has a production base in Chongqing. Hankook Tires operates as
subsidiary of the Group in China. It has headquarters in Shanghai and two other plants
in Jiangsu and Jiaxing Zhejiang.
The Group produces automobile wheels for passenger cars, SUVs and light-duty trucks,
buses, and competition cars. Hankook Tire is known for its radial tire and bias-ply tire
production. This company now supplies tires as original equipment to various
automakers. In addition to producing about 92 million tires per year, Hankook Tire also
sells batteries, alloy wheels, and brake pads. Chongqing Hankook mainly supplies
products to domestic manufacturers. Through sales in more than 180 countries,
Hankook Tire is ranked seventh in global sales revenue. The company has more than
21,000 employees in four regional headquarters, more than 28 overseas subsidiaries,
and has ﬁve research and development centers around the world. Hankook Tire makes
70% of its revenue through overseas markets.
In 2016, Hankook Tire announced it would
be moving its North America headquarters
from New Jersey to Tennessee. The
company would be investing USD 5
million in the process.
Section 1
AT A GLANCE
1. Subsidiary of Hankook Tire in South
Korea.
2. Has three production facilities in China
3. Production capacity: 92 million units
Hankook Tires
Page 28
Hankook Tires Co., Ltd.
No. 149 Dong Feng Road,
Yuzui Town, Jiang Bei, Chongqing
Tel: +86 23 6035 9555
Septian Septian
Mechanical Engineer
Yang Chun Jia
Regional Manager
Taenyung Kim
Overseas Sales Operations
(Andy)
Purchase Assistant

Section 2
Asian Tier 1 Suppliers
Page 29

China Association of Automobile Manufacturers (CAAM) is a social
organization founded in Beijing in May of 1987, with the approval of
the Ministry of Civil Affairs of the People’s Republic of China.
Having the qualifications of a legal social organization, it is a self-disciplined and non-
profit social organization that functions on the principle of equality. It consists of
enterprises and institutions as well as organizations engaged in the production and
management of automobiles (motorcycles), auto parts, and vehicle-related industries
founded within the boundaries of the People’s Republic of China.
The Member’s Representative Assembly is the highest authority of CAAM. It consists of
near 2,000 members, for which the board of directors is instituted. As the standing body
of CAAM, the Secretariat is established and formed under which there are 12
departments, three management-oriented branches, 24 product-oriented branches, and
one additional branch.
The China Association of Automobile Manufacturers (CAAM) implements national
principles and policies, safeguards the interests of the entire industry, and develops
China’s automotive industry. It offers services upon the reflection of demands, the
regulation of actions, and the establishment of platforms that promote the sound and
rapid development of the automotive industry in China. As one of the permanent
members of the International Organization of Motor Vehicle Manufacturers (OICA), China
Association of Automobile Manufacturers (CAAM) has established a close relationship
with international organizations of the automobile industry and in many countries and
regions around the world.
Section 1
AT A GLANCE
1. A social organization organized by
China’s Ministry of Civil Affairs.
2. Member of International Organization of
Motor Vehicle Manufacturers (OICA).
3. Purpose is to promote promote the
development of the automotive industry
in China, based on its main functions
such as policy research, information
service, self-discipline in the trade,
international communication and
exhibition service.
CAAM
Page 31
CAAM
No. 46, Sanlihe Road, Xicheng District 
Beijing, 100823, China
Tel: +86 10 6859 4941
Email: gihzb@caam.org.cn

Section 2
Chinese Automotive Organizations
Page 32

The 14th International Beijing Automotive Exhibiton, also known as
Beijing Auto Show or Auto China 2016, was held from April 25 - May 4,
2016, at the China International Exhibition Center New Venue and at at
the Old Venue.
The exhibition area reached 220,000 square meters. More than 1,600 exhibitors from 14
countries and regions all over the world attended the show. There 1,179 vehicles of
more than 100 brands and from every corner of the world displayed. Among the 112
brands, there were 79 domestic brands and the other 33 were from multinational auto
enterprises. This show also had 46 concept vehicles (26 were from domestic auto
enterprises) and 147 new energy vehicles. A total of 815,000 visitors attended the
exhibition.
Section 1
AT A GLANCE
1. Bi-annual show China International
2. Located in Beijing (Tianzhu)
3. Next event to be held April 2018
Beijing International Automotive Exhibition
Page 34
China Council for the Promotion of
International Trade, Automotive Committee
(CCPIT-Auto)
46 Sanlihe Road, Xicheng District,  
Beijing, 100823
Tel: +86 10 6859 5106
Email: autochina@auto-ccpit.org

New Energy Vehicle: There were 147 new energy vehicles displayed
in the exhibition. Among them were 35 electronic vehicles. There were
passenger cars, SUVs, MPVs, buses, and commercial vehicles.
Among the 147 new energy vehicles, there were 112 from State-
owned enterprises, which exceeded foreign enterprises.
Smart Car: Intelligent internet operated vehicles were popular at the
exhibition.
Intellectualized products broke the beginning stages where cell
phones have to be connected with the car. For the hard devices, 17-
inch touch screens were created by State-owned enterprises. Man-
machine interaction, on-board entertainment information, and
wearable devices are indicating the direction of new products.
Intelligent automated driving is becoming true and related
accomplishment were shown at the exhibition. The display of
autonomous driving became a highlight of the exhibition. Many
vehicles were equipped with lane-keeping, auxiliary braking, parking
assist systems, and other high-tech functions. Auto China 2016
indicated that intellectualization and automation has deeply infiltrated
the automotive industry.
Commercial vehicles: The exhibit’s commercial vehicle area attracted
many vehicle enterprises from within China. High-powered motor
tractors, lightweight vans, and new energy express vehicles were the
main exhibits. The crowd was pleased to witness internet super trucks
and concept vehicles revealing technologies related to new energy
and autonomous driving.
Update of auto parts and core technology: Many traditional auto
parts enterprises are responding to the automotive trend of
electrification, intellectualization, and connectivity. This is aiming at the
core parts of electronic vehicles and promoting innovation
technologies and products. For example, there is the lane departure
warning, collision prevention warning, self-adaptive cruise control,
high-performance compact wheel hub motor, and intelligent speech
interaction rear view mirror systems.
Foreign auto parts enterprises were enthusiastic to attend the
exhibition. Intelligent driving, electronic vehicles, energy saving, and
environment protecting technology and lightweight technologies were
displayed.
For example, the compact multi-function camera, driving assist
system, long-distance defrosting system, automatic control system of
high beam and self-adaptive cruise control were amongst the
exhibited.
Lightweight materials and technologies, such as the automatic start-
stop system, clean diesel technology, exhaust after-treatment system,
direct petrol injection system, and the novel turbocharge are becoming
the efficient way for environmental protection.
Page 35

Section 2
Chinese Automotive Events
Page 36

Automotive News China is a free weekly newsletter
delivered via e-mail to more than 20,000 Chinese
automotive industry executives and global automotive executives.
Automotive News China covers domestic Chinese automakers (e.g. SAIC, First
Automotive Works, Chery, Geely) who export vehicles worldwide. It also reveals the
purchasing operations of global automakers (e.g. General Motors, Volkswagen, Toyota,
etc.) that do business in China.
This publication also covers global suppliers (e.g. Aisin
Seiki, Faurecia, Lear, Visteon) that make auto parts in
China for export to North America, Europe and Japan,
as well as domestic Chinese suppliers (e.g. Wanxiang
Group, Chongqing Tsingshan, Tianjin Automotive,
Guizhou Honghu) who sell to automakers in China and
worldwide.
Automotive News China is published by the
Automotive News Group of Crain Communications Inc.
In addition to a full staﬀ of correspondents inside
China, it also draws upon the editorial resources of
sister publications, Automotive News, Automotive
News Europe, and Automobilwoche. The Automotive
News Group has an unrivaled worldwide network of
reporters and editors.
Section 1
AT A GLANCE
1. Published by the Automotive News Group
of Crain Communications Corporation.
2. Available online and via email, Automotive
News China serves Chinese automotive
industry executives and global auto
executives
Automotive News China
Page 38
Automotive News China 
Room 1303, Building 2,  
Lane 99, South Hongcao Road,  
Shanghai 200233 
Tel: +86 139 1851 5816

Section 2
Chinese Automotive Media
Page 39

about this book
xli
© 2018 Kaiser International Limited
Publisher: Uli Kaiser
uli@autobook.biz  
Editorial Contact: Tilmann Kaiser  
tilmann@autobook.biz  
 
Thanks to everyone supporting this publication with resources, information, data,
feedback.
Copyright of all company logos are with the respective companies
Copyright of all car photographs are with the respective companies
Copyright of all product photographs are with the respective companies
Copyright of all web site photographs are with the respective companies
Kaiser International Limited  
Markthallenstr. 2, 78315 Radolfzell, Germany
Phone +49 7732 9456842  
Mobile +49 151 1183 0804

China AutoBook 2018 Preview

More Related Content

What's hot

Similar to China AutoBook 2018 Preview

More from Uli Kaiser

Recently uploaded

China AutoBook 2018 Preview