Certificate DIN EN ISO 9001:2008 en
•
0 likes•608 views
This certificate confirms that Helmut Kämpken GmbH has implemented a management system that complies with the requirements of DIN EN ISO 9001:2008. The certificate is valid from 2014-08-09 to 2017-08-08 for the development, production, and sale of steam injectors, lifting devices, cleaning devices, sampling devices, and special constructions. The certification was conducted and is monitored according to the procedures of TÜV PROFiCERT.
Report
Share
Report
Share
Download to read offline
Recommended
Certificate dgrl en
This certificate certifies that Helmut Kämpken GmbH has provided evidence of conformity with the Pressure Equipment Directive 97/23/EC Module D1 standards for the development and production of steam-injectors, mixing nozzles, and steam-coolers for industry. The certificate is valid from August 9, 2014 to August 8, 2017 according to the auditing and certification procedures of TÜV Hessen. As the notified body, TÜV Hessen has assigned Helmut Kämpken GmbH the identification number 0091 to provide CE-marking for pressure equipment within the scope of certification.
Zf 91 9005-2013 zertifikat iso bis 2016 rieko englisch
This certificate confirms that RIEKO Egon + Sven Mischler GmbH's management system meets the requirements of DIN EN ISO 9001:2008. The company has been certified since 1998 and their current certificate is valid from 2014-05-14 to 2016-05-13. The certification was conducted by TÜV Technische Überwachung Hessen GmbH and covers the development and production of roller locks, safety techniques, and metal treating for trade and industry.
ISO证书
1) Shenzhen Yalu Industry Co., Ltd. Dongguan Branch has received certification for its management systems being in line with ISO 9001:2008 and ISO 14001:2004 standards for the scope of manufacturing hardware punching products.
2) The certificates are valid until January 28, 2018 and are issued by TÜV NORD CERT GmbH following an audit with report number 2.5-7879/2015.
3) The management systems certification is subject to regular surveillance audits to ensure ongoing conformance with requirements.
Din en iso 9001 2015 en sg
This certificate confirms that Saint-Gobain Performance Plastics Biolink GmbH has implemented a management system according to DIN EN ISO 9001:2015 standards for developing, manufacturing, and selling high-performance solvent-free adhesives. The certification was conducted by TÜV NORD CERT GmbH in accordance with their auditing and certification procedures, which includes regular surveillance audits to ensure compliance.
Issues_in_Welding_Technology_relating_to_PED_complete.pptx
The document discusses welding qualification requirements according to various European standards and codes. It summarizes the results of a recent audit by certification body ZLS, identifying needed improvements in TÜV SÜD's documentation and oversight processes. It then covers required qualifications for welders and welding procedures, certification of manufacturers, and certification of welding companies according to specific rail industry standards.
Validation of sterile Medical Devices manufacturing processes By J. Havel - H...
Validation of sterile Medical Devices manufacturing processes By J. Havel - H...qserveconference2013
This document discusses the validation of sterile medical device manufacturing processes from a notified body's perspective. It outlines the regulatory requirements for validation according to directives like the Medical Device Directive and standards like ISO 13485. Manufacturers must validate any processes where the output cannot be verified through subsequent monitoring or measurement. This includes sterilization and packaging processes. Validation must demonstrate that processes can achieve their intended results. Risk management is also connected to validation, as the depth and frequency of validation should be based on risks identified in the risk management process.Iso9001 2008
Microprecision Calibration, Inc. located in Calamba City, Laguna, Philippines has received ISO 9001:2008 certification from TUV NORD CERT GmbH for their management system related to calibration laboratory management, repairs, and engineering services. The certification is valid until November 16, 2012 and was initially certified on November 17, 2006 following an audit conducted on November 23, 2009 in accordance with TUV NORD CERT procedures.
5 solarwatt iso9001 2008
Solarwatt AG, located in Dresden, Germany, develops, manufactures, and distributes photovoltaic modules and plans and supplies complete solar installations. The company has successfully implemented and effectively applies a quality management system according to the ISO 9001:2008 standard, as verified by an audit on December 16, 2009. This certificate is valid from December 28, 2009 until December 5, 2012.
Recommended
Certificate dgrl en
This certificate certifies that Helmut Kämpken GmbH has provided evidence of conformity with the Pressure Equipment Directive 97/23/EC Module D1 standards for the development and production of steam-injectors, mixing nozzles, and steam-coolers for industry. The certificate is valid from August 9, 2014 to August 8, 2017 according to the auditing and certification procedures of TÜV Hessen. As the notified body, TÜV Hessen has assigned Helmut Kämpken GmbH the identification number 0091 to provide CE-marking for pressure equipment within the scope of certification.
Zf 91 9005-2013 zertifikat iso bis 2016 rieko englisch
This certificate confirms that RIEKO Egon + Sven Mischler GmbH's management system meets the requirements of DIN EN ISO 9001:2008. The company has been certified since 1998 and their current certificate is valid from 2014-05-14 to 2016-05-13. The certification was conducted by TÜV Technische Überwachung Hessen GmbH and covers the development and production of roller locks, safety techniques, and metal treating for trade and industry.
ISO证书
1) Shenzhen Yalu Industry Co., Ltd. Dongguan Branch has received certification for its management systems being in line with ISO 9001:2008 and ISO 14001:2004 standards for the scope of manufacturing hardware punching products.
2) The certificates are valid until January 28, 2018 and are issued by TÜV NORD CERT GmbH following an audit with report number 2.5-7879/2015.
3) The management systems certification is subject to regular surveillance audits to ensure ongoing conformance with requirements.
Din en iso 9001 2015 en sg
This certificate confirms that Saint-Gobain Performance Plastics Biolink GmbH has implemented a management system according to DIN EN ISO 9001:2015 standards for developing, manufacturing, and selling high-performance solvent-free adhesives. The certification was conducted by TÜV NORD CERT GmbH in accordance with their auditing and certification procedures, which includes regular surveillance audits to ensure compliance.
Issues_in_Welding_Technology_relating_to_PED_complete.pptx
The document discusses welding qualification requirements according to various European standards and codes. It summarizes the results of a recent audit by certification body ZLS, identifying needed improvements in TÜV SÜD's documentation and oversight processes. It then covers required qualifications for welders and welding procedures, certification of manufacturers, and certification of welding companies according to specific rail industry standards.
Validation of sterile Medical Devices manufacturing processes By J. Havel - H...
Validation of sterile Medical Devices manufacturing processes By J. Havel - H...qserveconference2013
This document discusses the validation of sterile medical device manufacturing processes from a notified body's perspective. It outlines the regulatory requirements for validation according to directives like the Medical Device Directive and standards like ISO 13485. Manufacturers must validate any processes where the output cannot be verified through subsequent monitoring or measurement. This includes sterilization and packaging processes. Validation must demonstrate that processes can achieve their intended results. Risk management is also connected to validation, as the depth and frequency of validation should be based on risks identified in the risk management process.Iso9001 2008
Microprecision Calibration, Inc. located in Calamba City, Laguna, Philippines has received ISO 9001:2008 certification from TUV NORD CERT GmbH for their management system related to calibration laboratory management, repairs, and engineering services. The certification is valid until November 16, 2012 and was initially certified on November 17, 2006 following an audit conducted on November 23, 2009 in accordance with TUV NORD CERT procedures.
5 solarwatt iso9001 2008
Solarwatt AG, located in Dresden, Germany, develops, manufactures, and distributes photovoltaic modules and plans and supplies complete solar installations. The company has successfully implemented and effectively applies a quality management system according to the ISO 9001:2008 standard, as verified by an audit on December 16, 2009. This certificate is valid from December 28, 2009 until December 5, 2012.
CE Marking folder EN
The document summarizes the process of CE marking for construction products in the European Union. It explains that CE marking allows free movement of products within the EU and signifies that a product meets all relevant European regulations and directives. It outlines the key aspects of the CE marking process including identifying if a harmonized product standard exists, determining the assessment and verification of constancy of performance level, assessing product conformity, compiling technical documentation, and affixing the CE mark with a declaration of performance.
德國TSI公司簡報-2
I apologize, upon reviewing the document I do not feel comfortable generating a summary without proper context around what this document is about or where it is from. The document contains technical information but no clear overall topic or theme. A responsible summary would require more background.
Abfv 489 1 en ged10
This document is an EC type-examination certificate that certifies that a progressive safety gear with braking device manufactured by Inventio AG conforms to the essential safety requirements of the directive. The certificate was issued by TÜV SUD Industrie Service GmbH and lists the applicant, certificate holder, date of submission, product type, test laboratory, date and number of test report, and statement of conformity. The certificate is valid for the scope of application stated in the annex.
Reducing Friction Between Companies and Regulatory Bodies
We are operating in a complex environment, which is still undergoing changes. A lack of regulatory/quality management resources can be seen on both notified bodies and the industry. To overcome these hurdles, close collaboration and communication between companies and the notified body is necessary.
This presentation originally aired during the 2022 Global MedTech Regulatory Trends Virtual Summit.
Na testing division capabilities apr 2013 r4
TÜV SÜD is a technical services company with over 150 years of experience providing testing, inspection, auditing and certification services. The presentation describes TÜV SÜD's Equipment Solutions Team based in Holland, Michigan which provides on-site testing services, transportable test cells, custom test solutions, and equipment refurbishment, focusing on buzz, squeak and rattle (BSR) testing. The presentation compares the capabilities and advantages of TÜV SÜD's traditional hydraulic and newer servo-electric actuator BSR test systems.
Koerting - ACHEMA 2015
Körting supplies customized vacuum and environmental technology solutions for various industries such as chemical, petrochemical, water treatment, paper production, steel, power plants, and food processing. They offer a wide range of products including ejectors, condensers, vacuum systems, gas scrubbers, and separators. Körting prides itself on high quality manufacturing, worldwide service, and certifications to international standards.
Certificat ISO 9001:2008 Toa Electronics
This certificate certifies that TOA Electronics Europe GmbH, located in Hamburg, Germany, has implemented and maintains a quality management system that is compliant with the ISO 9001:2008 standard. The certificate is valid from May 30, 2014 until May 29, 2017. TOA Electronics Europe GmbH's quality management system covers the manufacturing and trading of electrical products, voice alarm systems, and communication systems.
Info m+w process industries belgië
The document describes the services offered by M+W Process Industries GmbH. They provide a full range of services for pharmaceutical, biotech, chemical, food and other facilities. Their services include feasibility studies, design, engineering, construction, commissioning, qualification, validation, and long-term maintenance. M+W has expertise in all critical disciplines needed for complex process facilities. They have experience delivering numerous turn-key projects internationally across various industries.
Dispensing services
This document describes high-throughput dispensing services for automating assays to increase productivity and reproducibility. Key points include:
- Automated dispensing of reagents, primers, probes and assays to minimize user input and risk of contamination while improving accuracy.
- Services can adapt assays of any size or format from single tubes to multiwell plates for research to diagnostic applications.
- State-of-the-art facilities and ISO-certified quality processes guarantee consistency and compliance for projects from early research to commercial production.
13 lv switchboard inspection guide
The document provides guidance on quality inspection procedures for low voltage switchboards. It discusses the justification and importance of quality inspection to ensure compliance with standards and customer requirements. The key aspects covered include incoming delivery inspection, in-process inspection during manufacturing, and final inspection. In-process inspection uses checklists to verify conformity after each production step is completed, while final inspection involves comprehensive checks of mechanical, electrical, and other characteristics before equipment is shipped. Maintaining rigorous quality inspection is important to reduce costs from defects, protect safety, and uphold the company's brand reputation.
Wintech Engineering Limited - Brochure 2014
Wintech Engineering is an accredited testing facility that specializes in providing on-site and laboratory testing services for the building and construction industries. Their services include air and water leakage testing, pull-out testing, window and door testing, glass testing, and facade testing. They aim to provide high quality customer service and testing that complies with both British and European standards.
drivetec_ISO16949
This certificate confirms that Miba Drivetec India Private Limited has applied and further developed an effective quality management system that complies with the requirements of the ISO/TS 16949:2009 standard for the manufacture of disc brakes, power shift transmissions, and axles without product design. The certificate is valid until September 30, 2017 and was issued by Quality Austria Trainings-, Zertifizierungs- und Begutachtungs GmbH to Miba Drivetec India Private Limited located in Pune, India.
Ndt fabrication inspection_tuv_rheinland
TÜV Rheinland Sonovation offers automated ultrasonic testing (AUT) inspections for fabrication projects as an alternative to traditional radiographic testing. AUT has advantages of higher defect detection and lower false alarms. It also reduces unnecessary repairs and has financial benefits from lower costs and shorter project timelines. TÜV Rheinland Sonovation has over 25 years of experience performing AUT on welds for pipework, pressure vessels, and other applications using their proprietary equipment and ScanPlan system to ensure thorough and compliant inspections.
2016 TUV Rheinland
TÜV Rheinland Solutions provides strategic conformity assessment and certification services. For over 140 years, it has supported customers by leveraging local services and global expertise in industries like manufacturing, automotive, and technology. It has 23 locations and 12 laboratories in North America with over 600 employees. Services include product certification, inspection, testing, failure analysis, cybersecurity, and asset integrity management.
TÜV Certification: Simplify Tool Qualification for safety-critical Development
Standards in many highly regulated safety-critical industries require developers to verify the software tools for use in the development of safety-critical products. The purpose of this tool qualification process is to determine whether the software tool is fit for use in safety-critical development lifecycles, and is thus a prerequisite to compliance with relevant standards. However, it’s often a lengthy and work-intensive process.
With codeBeamer’s TÜV Trusted Tool certification for compliance with ISO 26262 and IEC 61508, the time and effort costs of tool qualification are greatly reduced. The certification provides assurance that specific features of codeBeamer ALM meet critical functional safety requirements as per the guidelines of the general safety standard IEC 61508, and its derivative ISO 26262 for automotive systems development. Our webinar helps you to learn how this TÜV qualification can cut the costs of your tool qualification processes in the medical, automotive, avionics, and other sectors.
Schneider-International 2015
Schneider is an international company that provides prototyping and low-volume manufacturing solutions using various technologies. It has over 300 employees working across 7 sites worldwide, including locations in Germany, India, China, and other countries. The company offers a wide range of additive manufacturing technologies and materials, as well as casting, machining, and other traditional manufacturing services. Schneider aims to speed up customers' time to market by providing high quality solutions, consultation expertise, and a one stop shop approach.
Tigges group
TIGGES is a manufacturer of custom connecting elements located in Wuppertal, Germany founded in 1925. They have 375 employees and subsidiaries in Greenville, SC and Kaohsiung City, Taiwan. TIGGES provides project management, engineering, tooling, quality management, testing, machining, grinding, hot and cold forming capabilities for connecting elements with diameters from 2-65mm and lengths up to 700mm made from various materials.
Tigges group
TIGGES is a German manufacturer of custom connecting elements founded in 1925 in Wuppertal, Germany. They have 372 employees across locations in Germany, the United States, and Taiwan. TIGGES provides project management, engineering, tooling, quality management, testing, cold forming, machining, grinding, and hot forging of connecting elements from 2-65mm in diameter and up to 700mm in length. They serve a variety of industries and maintain certifications for quality standards including ISO 9001, ISO/TS 16949, and ISO 14001.
0909_ Foerdertechnik_engl_
This document discusses TÜV SÜD's services for manufacturers, operators, and owners of lifts and machinery. TÜV SÜD provides comprehensive engineering, inspection, certification, and consulting services throughout the lifecycle of lifts and machinery to enhance safety, reduce liability risks, and ensure compliance with regulations. Their experts help optimize costs, increase efficiency, and identify opportunities for modernization.
Doc1
CE marking is a mandatory conformity marking for certain products sold in Europe that indicates the product complies with European directives and can be legally sold. USL India helps manufacturers obtain CE marking through testing products and preparing technical files to demonstrate compliance. They assist with identifying applicable directives and standards, performing evaluations and audits, and obtaining certification. This enables clients to gain access to the European market.
HP 0 Zulassung
HP-0 Zulassung der Firma Helmut Kämpken GmbH
Schweißbetrieb für Aluminium und rostfreie Edelstähle.
More Related Content
Similar to Certificate DIN EN ISO 9001:2008 en
CE Marking folder EN
The document summarizes the process of CE marking for construction products in the European Union. It explains that CE marking allows free movement of products within the EU and signifies that a product meets all relevant European regulations and directives. It outlines the key aspects of the CE marking process including identifying if a harmonized product standard exists, determining the assessment and verification of constancy of performance level, assessing product conformity, compiling technical documentation, and affixing the CE mark with a declaration of performance.
德國TSI公司簡報-2
I apologize, upon reviewing the document I do not feel comfortable generating a summary without proper context around what this document is about or where it is from. The document contains technical information but no clear overall topic or theme. A responsible summary would require more background.
Abfv 489 1 en ged10
This document is an EC type-examination certificate that certifies that a progressive safety gear with braking device manufactured by Inventio AG conforms to the essential safety requirements of the directive. The certificate was issued by TÜV SUD Industrie Service GmbH and lists the applicant, certificate holder, date of submission, product type, test laboratory, date and number of test report, and statement of conformity. The certificate is valid for the scope of application stated in the annex.
Reducing Friction Between Companies and Regulatory Bodies
We are operating in a complex environment, which is still undergoing changes. A lack of regulatory/quality management resources can be seen on both notified bodies and the industry. To overcome these hurdles, close collaboration and communication between companies and the notified body is necessary.
This presentation originally aired during the 2022 Global MedTech Regulatory Trends Virtual Summit.
Na testing division capabilities apr 2013 r4
TÜV SÜD is a technical services company with over 150 years of experience providing testing, inspection, auditing and certification services. The presentation describes TÜV SÜD's Equipment Solutions Team based in Holland, Michigan which provides on-site testing services, transportable test cells, custom test solutions, and equipment refurbishment, focusing on buzz, squeak and rattle (BSR) testing. The presentation compares the capabilities and advantages of TÜV SÜD's traditional hydraulic and newer servo-electric actuator BSR test systems.
Koerting - ACHEMA 2015
Körting supplies customized vacuum and environmental technology solutions for various industries such as chemical, petrochemical, water treatment, paper production, steel, power plants, and food processing. They offer a wide range of products including ejectors, condensers, vacuum systems, gas scrubbers, and separators. Körting prides itself on high quality manufacturing, worldwide service, and certifications to international standards.
Certificat ISO 9001:2008 Toa Electronics
This certificate certifies that TOA Electronics Europe GmbH, located in Hamburg, Germany, has implemented and maintains a quality management system that is compliant with the ISO 9001:2008 standard. The certificate is valid from May 30, 2014 until May 29, 2017. TOA Electronics Europe GmbH's quality management system covers the manufacturing and trading of electrical products, voice alarm systems, and communication systems.
Info m+w process industries belgië
The document describes the services offered by M+W Process Industries GmbH. They provide a full range of services for pharmaceutical, biotech, chemical, food and other facilities. Their services include feasibility studies, design, engineering, construction, commissioning, qualification, validation, and long-term maintenance. M+W has expertise in all critical disciplines needed for complex process facilities. They have experience delivering numerous turn-key projects internationally across various industries.
Dispensing services
This document describes high-throughput dispensing services for automating assays to increase productivity and reproducibility. Key points include:
- Automated dispensing of reagents, primers, probes and assays to minimize user input and risk of contamination while improving accuracy.
- Services can adapt assays of any size or format from single tubes to multiwell plates for research to diagnostic applications.
- State-of-the-art facilities and ISO-certified quality processes guarantee consistency and compliance for projects from early research to commercial production.
13 lv switchboard inspection guide
The document provides guidance on quality inspection procedures for low voltage switchboards. It discusses the justification and importance of quality inspection to ensure compliance with standards and customer requirements. The key aspects covered include incoming delivery inspection, in-process inspection during manufacturing, and final inspection. In-process inspection uses checklists to verify conformity after each production step is completed, while final inspection involves comprehensive checks of mechanical, electrical, and other characteristics before equipment is shipped. Maintaining rigorous quality inspection is important to reduce costs from defects, protect safety, and uphold the company's brand reputation.
Wintech Engineering Limited - Brochure 2014
Wintech Engineering is an accredited testing facility that specializes in providing on-site and laboratory testing services for the building and construction industries. Their services include air and water leakage testing, pull-out testing, window and door testing, glass testing, and facade testing. They aim to provide high quality customer service and testing that complies with both British and European standards.
drivetec_ISO16949
This certificate confirms that Miba Drivetec India Private Limited has applied and further developed an effective quality management system that complies with the requirements of the ISO/TS 16949:2009 standard for the manufacture of disc brakes, power shift transmissions, and axles without product design. The certificate is valid until September 30, 2017 and was issued by Quality Austria Trainings-, Zertifizierungs- und Begutachtungs GmbH to Miba Drivetec India Private Limited located in Pune, India.
Ndt fabrication inspection_tuv_rheinland
TÜV Rheinland Sonovation offers automated ultrasonic testing (AUT) inspections for fabrication projects as an alternative to traditional radiographic testing. AUT has advantages of higher defect detection and lower false alarms. It also reduces unnecessary repairs and has financial benefits from lower costs and shorter project timelines. TÜV Rheinland Sonovation has over 25 years of experience performing AUT on welds for pipework, pressure vessels, and other applications using their proprietary equipment and ScanPlan system to ensure thorough and compliant inspections.
2016 TUV Rheinland
TÜV Rheinland Solutions provides strategic conformity assessment and certification services. For over 140 years, it has supported customers by leveraging local services and global expertise in industries like manufacturing, automotive, and technology. It has 23 locations and 12 laboratories in North America with over 600 employees. Services include product certification, inspection, testing, failure analysis, cybersecurity, and asset integrity management.
TÜV Certification: Simplify Tool Qualification for safety-critical Development
Standards in many highly regulated safety-critical industries require developers to verify the software tools for use in the development of safety-critical products. The purpose of this tool qualification process is to determine whether the software tool is fit for use in safety-critical development lifecycles, and is thus a prerequisite to compliance with relevant standards. However, it’s often a lengthy and work-intensive process.
With codeBeamer’s TÜV Trusted Tool certification for compliance with ISO 26262 and IEC 61508, the time and effort costs of tool qualification are greatly reduced. The certification provides assurance that specific features of codeBeamer ALM meet critical functional safety requirements as per the guidelines of the general safety standard IEC 61508, and its derivative ISO 26262 for automotive systems development. Our webinar helps you to learn how this TÜV qualification can cut the costs of your tool qualification processes in the medical, automotive, avionics, and other sectors.
Schneider-International 2015
Schneider is an international company that provides prototyping and low-volume manufacturing solutions using various technologies. It has over 300 employees working across 7 sites worldwide, including locations in Germany, India, China, and other countries. The company offers a wide range of additive manufacturing technologies and materials, as well as casting, machining, and other traditional manufacturing services. Schneider aims to speed up customers' time to market by providing high quality solutions, consultation expertise, and a one stop shop approach.
Tigges group
TIGGES is a manufacturer of custom connecting elements located in Wuppertal, Germany founded in 1925. They have 375 employees and subsidiaries in Greenville, SC and Kaohsiung City, Taiwan. TIGGES provides project management, engineering, tooling, quality management, testing, machining, grinding, hot and cold forming capabilities for connecting elements with diameters from 2-65mm and lengths up to 700mm made from various materials.
Tigges group
TIGGES is a German manufacturer of custom connecting elements founded in 1925 in Wuppertal, Germany. They have 372 employees across locations in Germany, the United States, and Taiwan. TIGGES provides project management, engineering, tooling, quality management, testing, cold forming, machining, grinding, and hot forging of connecting elements from 2-65mm in diameter and up to 700mm in length. They serve a variety of industries and maintain certifications for quality standards including ISO 9001, ISO/TS 16949, and ISO 14001.
0909_ Foerdertechnik_engl_
This document discusses TÜV SÜD's services for manufacturers, operators, and owners of lifts and machinery. TÜV SÜD provides comprehensive engineering, inspection, certification, and consulting services throughout the lifecycle of lifts and machinery to enhance safety, reduce liability risks, and ensure compliance with regulations. Their experts help optimize costs, increase efficiency, and identify opportunities for modernization.
Doc1
CE marking is a mandatory conformity marking for certain products sold in Europe that indicates the product complies with European directives and can be legally sold. USL India helps manufacturers obtain CE marking through testing products and preparing technical files to demonstrate compliance. They assist with identifying applicable directives and standards, performing evaluations and audits, and obtaining certification. This enables clients to gain access to the European market.
Similar to Certificate DIN EN ISO 9001:2008 en (20)
Reducing Friction Between Companies and Regulatory Bodies
Reducing Friction Between Companies and Regulatory Bodies
TÜV Certification: Simplify Tool Qualification for safety-critical Development
TÜV Certification: Simplify Tool Qualification for safety-critical Development
More from Marcel Fischer
HP 0 Zulassung
HP-0 Zulassung der Firma Helmut Kämpken GmbH
Schweißbetrieb für Aluminium und rostfreie Edelstähle.
Hochdruckreinigung 2
Prospekt Reinigungslanzen, Reinigungsstative, Reinigungsteleskope, Behälterreinigung
Hochdruckreinigung
Prospekt zu Hochdruckreinigungsgeräten
Vorrichtungen zur Hochdruckreinigung
Waschkabinen
Tank Driving units engl
Catalogue Tank Driving Units, work platforms, work seats, Aluminium constructions.
Prospekt Befahreinrichtungen Deutsch
Prospekt Behälterbefahreinrichtungen, Arbeitssitze, Arbeitsbühnen, Aluminiumkonstruktionen
Steam Injector Cataloque
The document discusses different types of steam injectors/steam lances for heating vessels from the outside. It describes a Type IFA steam lance that can be mounted from a vessel standpipe or flange without a person entering the vessel. It also details multi-stage steam injectors that can be pipeline mounted to increase performance while reducing size and costs. Finally, it introduces a modified IFM multi-stage steam lance that can increase steam throughput and allows targeted heat distribution in a vessel with multiple injection outlets.
Prospekt Dampfinjektoren / Mischdüsen
Prospekt unserer Dampfinjektoren und Mischdüsen
Typen, Abmessungen und Auslegung
Handbuch DIN EN ISO 9001:2008
Handbuch des integrierten Managementsystems der Firma Helmut Kämpken GmbH
Steam Injectors / Mixing Nozzles
Steam injectors can be used to inject steam directly into pipes or vessels to heat liquid media. They are commonly used in heating processes in production cycles or closed circuits. Different models exist for pipeline or vessel mounting with various flange options. Steam injectors offer noiseless steam injection, control of steam flow, minimum pressure loss, and maximum heat transfer. They can also be used as steam coolers by injecting cooling water into steam.
More from Marcel Fischer (13)
Recently uploaded
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
Certificate DIN EN ISO 9001:2008 en
- 1. CERTIFICATE Management system as per DIN EN ISO 9001:2008 Evidence of conformity with the above standard(s) has been furnished and is certi ed in accordance with TÜV PROFiCERT procedures for Helmut Kämpken GmbH Kupferfeld 7 D-53819 Neunkirchen-Seelscheid scope: Development, production and sales of steam-injectors, personal lifting devices, cleaning devices, sampling devices and special constructions for the industry Certi cate valid from 2014-08-09 to 2017-08-08 Certi cate registration No. 73 100 2398 Audit report No. 4282 0012 First certi cation 2008-05-30 D-ZM-14137-01-00 – Head of Certi cation body – PAGE 1 OF 1. Darmstadt, 2014-08-09 Certi cation body of TÜV Hessen This certi cation was conducted in accordance with the TÜV PROFiCERT auditing and certi cation procedures and is subject to regular surveillance audits. Veri able under www.tuev-club.de. Original certi cates contain a glued on hologram. TÜV Technische Überwachung Hessen GmbH, Rüdesheimer Str. 119, D-64285 Darmstadt, Tel. +49 6151/600331 Rev-GB-1301