Wintech Engineering is an accredited testing facility that specializes in providing on-site and laboratory testing services for the building and construction industries. Their services include air and water leakage testing, pull-out testing, window and door testing, glass testing, and facade testing. They aim to provide high quality customer service and testing that complies with both British and European standards.

1. B U I L D I N G E N V E L O P E T E S T I N G
wintech_bro_2014.indd 1 30/05/2014 17:03

2. WELCOME TO WINTECH
Wintech Engineering is an independent UKAS accredited testing facility. We specialise in providing
a comprehensive range of services throughout the building and construction industries worldwide,
either on-site, or at our purpose-built test laboratory in Telford, Shropshire, in the heart of industrial England.
Our numerous accreditations guarantee the recognition of test certificates by a wide range of global
institutions. As a Notified Test Laboratory (No.1288), Wintech can provide you with the necessary
testing services to ensure that your products comply with the requirements for CE Marking in line
with the Construction Products Regulation.
At Wintech, we strive to provide you with the highest level of customer service, delivering a prompt
turnaround for testing with short lead times, flexible scheduling and the timely issue of test data.
We are committed to the continual improvement of our services through active training and professional
development of our employees and investment in new technologies.
wintech_bro_2014.indd 2 30/05/2014 17:03

3. wintech_bro_2014.indd 3 30/05/2014 17:03

4. ON-SITE TESTING
Armed with the latest technology, Wintech’s On-site Testing
Division provides a diverse range of cost-effective, time-efficient
and professionally accredited testing services structured to suit
your own specific requirements.
AIR LEAKAGE
• Residential
• Commercial
• CWCT Section 5 Static Air Permeability Testing
WATER LEAKAGE
• CWCT Section 9
• CWCT Section 10 (BS EN 13051:2001)
• CWCT Section 6 Static Water Tightness Testing
PULL-OUT TESTING
On-site testing is undertaken to check the quality of workmanship on
an installation – generally a requirement of the Project Specification
or the National House Building Council (NHBC) Specification.
We can undertake CWCT Section 9 and AAMA 501.2 hose testing
on permanently closed jointed systems, such as curtain walling.
For open-jointed systems – windows, doors, louvers and rainscreen
cladding – we undertake CWCT Section 10 spray bar testing in
accordance with BS EN 13051.
Testing for air leakage is a requirement of the Building Regulation
outlined in Approved Documents L1A (residential buildings) and
L2A (commercial buildings). Any air leakage tests we conduct are
issued to the building control officer as part of the handover process.
wintech_bro_2014.indd 4 30/05/2014 17:03

5. wintech_bro_2014.indd 5 30/05/2014 17:03

6. WINDOWS AND DOORS
The testing processes we undertake on windows and doors may
either be specific to your project or a part of the development cycle
of a new product before it can be launched.
Project-driven testing is usually specified by an architect or consultant
and aims to ensure that the installed product meets the expected
level of performance for its intended use. Typical examples include
tests for weathertightness, durability and security which can be used
to demonstrate compliance with Secured by Design.
Product standard testing is a mandatory requirement set out by the
Construction Products Regulation. It requires manufacturers and
installers to declare the performance of their products for CE Marking
before they can be placed on the market. Our tests will demonstrate
that your windows and doors operate in accordance with British,
European and American standards.
Wintech’s bespoke test equipment and unique laboratory facilities
cater for a variety of window and door configurations.
SINGLE AND DOUBLE DOORS
BI-FOLD DOORS
VERTICAL SLIDING WINDOWS
PARALLEL OPENING WINDOWS
TILT AND TURN WINDOWS
wintech_bro_2014.indd 6 30/05/2014 17:03

7. wintech_bro_2014.indd 7 30/05/2014 17:03

8. GLASS TESTING
Wintech Engineering also specialises in the testing of glass and
glazing products. We use initial type testing to demonstrate for
you and your clients that your product conforms to the standards
necessary for CE Marking.
FRAGMENTATION TESTING
IMPACT TESTING
FOUR-POINT BEND TESTING
Our fragmentation testing ensures that breakage and mechanical
strength data meets the criteria outlined in the standards for
thermally-toughened glass (BS EN 12150-1), heat-strengthened
glass (BS EN 1863-1) and heat-soaked glass (BS EN 14179-1).
If you wish to declare an impact performance, we can conduct
testing in accordance with BS EN 12600:2002, which enables a
classification to be given for your glass product that can be listed
on the Declaration of Performance (DoP) for CE Marking.
wintech_bro_2014.indd 8 30/05/2014 17:03

9. wintech_bro_2014.indd 9 30/05/2014 17:03

10. FACADE TESTING
Wintech offers a variety of standardised, specialised and project-
specific services covering a wide range of facade systems and
configurations. We aim to offer maximum flexibility to our clients
for whom we are able to provide a diverse range of testing options.
Our dedicated, professionally accredited laboratory can
accommodate more than a dozen simulations at any one time,
catering for sizes up to 10 metres in height and 12 metres in width.
In accordance with British, European and American standards
we can evaluate the performance of your facade using a range
of weather tightness tests.
CURTAIN WALL TESTING
RAINSCREEN TESTING
WINDOW WALL TESTING
GLAZED ROOFLIGHT TESTING
Since our facilities are UKAS accredited to ISO/IEC 17025:2005
you can be assured that any test data we produce on your behalf
will be valid anywhere throughout the world.
wintech_bro_2014.indd 10 30/05/2014 17:03

11. wintech_bro_2014.indd 11 30/05/2014 17:03

12. Notified Body 1288
2223
Wintech Engineering Limited
Halesfield 2,
Telford
TF7 4QH
T: +44(0)1952 586580
www.wintechtesting.com
B U I L D I N G E N V E L O P E T E S T I N G
wintech_bro_2014.indd 12 30/05/2014 17:03