Base frame for press
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
Upper and lower beam for ceramic press
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
Grinding roller shells are key components for vertical roller mills that increase wear resistance. They are made of high hardness ZG30Mn material in sizes from 3-20 tons to solve wear issues. CHAENG produces customized grinding roller shells using CAE software and quality assurance testing. Their roller shells have been used successfully in cement and other industries in China and by a major Danish vertical mill manufacturer.
The tile making machine has several advantages:
1. It has high quality raw materials to ensure tile quality and longevity.
2. It has more functions like being fully automatic to save on labor costs and the ability to make different tile varieties.
3. It has a beautiful appearance due to high quality painting and polished welding that results in a flawless surface.
The file is to introduce the vertical mill grinding table made by CHAENG. -- CHAENG (Great Wall Steel Casting) is experienced in manufacturing steel casting parts for vertical roller mill.
www.partscasting.com
E-mail: casting@chaeng.co
Proposed Pilot 2 Dryer Door Glass Sub AssemblyWesley Roberts
This document proposes changes to a dryer door glass sub-assembly. It suggests increasing the inside diameter of the metal ring by 5mm to allow the gasket to be assembled without adhesive in under 1 minute. Two mock-up doors were assembled with one mounted for testing. Next steps include further testing on force requirements, wear effects, and impacts on heating, as well as obtaining tooling quotes.
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
This document discusses the potential for using continuous casting to produce seamless steel pipes. Currently, pipes are made through a multi-step process involving melting, casting, heating, rolling and finishing. Continuous casting could potentially simplify this process by directly casting hollow steel pipes that could then be sized down in rolling mills. This would reduce energy usage and costs from eliminating preheating furnaces and billet heating. Continuous casting also enables higher production yields with fewer defects from a simpler, more automated process. However, challenges include ensuring proper steel chemistry and quality control during casting and reducing the pipe thickness in sizing mills after casting.
Upper and lower beam for ceramic press
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
Grinding roller shells are key components for vertical roller mills that increase wear resistance. They are made of high hardness ZG30Mn material in sizes from 3-20 tons to solve wear issues. CHAENG produces customized grinding roller shells using CAE software and quality assurance testing. Their roller shells have been used successfully in cement and other industries in China and by a major Danish vertical mill manufacturer.
The tile making machine has several advantages:
1. It has high quality raw materials to ensure tile quality and longevity.
2. It has more functions like being fully automatic to save on labor costs and the ability to make different tile varieties.
3. It has a beautiful appearance due to high quality painting and polished welding that results in a flawless surface.
The file is to introduce the vertical mill grinding table made by CHAENG. -- CHAENG (Great Wall Steel Casting) is experienced in manufacturing steel casting parts for vertical roller mill.
www.partscasting.com
E-mail: casting@chaeng.co
Proposed Pilot 2 Dryer Door Glass Sub AssemblyWesley Roberts
This document proposes changes to a dryer door glass sub-assembly. It suggests increasing the inside diameter of the metal ring by 5mm to allow the gasket to be assembled without adhesive in under 1 minute. Two mock-up doors were assembled with one mounted for testing. Next steps include further testing on force requirements, wear effects, and impacts on heating, as well as obtaining tooling quotes.
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
This document discusses the potential for using continuous casting to produce seamless steel pipes. Currently, pipes are made through a multi-step process involving melting, casting, heating, rolling and finishing. Continuous casting could potentially simplify this process by directly casting hollow steel pipes that could then be sized down in rolling mills. This would reduce energy usage and costs from eliminating preheating furnaces and billet heating. Continuous casting also enables higher production yields with fewer defects from a simpler, more automated process. However, challenges include ensuring proper steel chemistry and quality control during casting and reducing the pipe thickness in sizing mills after casting.
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
This document provides notes on the facade assembly line process for Ventana DBS. The 11-step process includes: 1) storing extrusions and glass, 2) cutting extrusions, 3) CNC machine cutting, 4) sealing horizontals to verticals, 5) stacking galvanized backpan, 6) stacking insulation, 7) stacking shadowbox, 8) stacking glass on top, 9) sealing with structural silicone, 10) installing reveals with gaskets, and 11) caulking reveals. Additional details are provided on boxing, cutting, CNC machine use, sealing, and structural silicone application.
SINOM GROUP CO., LTD. is one of the largest manufacturer of copper mould tube in China. Based on customers requirement, we design, manufacture and install the square copper mould tube, round copper mould tube, beam blank, rectangular copper mould tube, diamond type, non-standard type etc.
Development and Progress of V-process in Chinazhang jianman
(1) The document discusses the development and progress of V-process casting in China. It began being studied in 1974 and has grown significantly, with over 500 firms now using the technique.
(2) The key aspects of V-process casting are that it uses vacuum instead of binders in the sand mold. This allows for high dimensional accuracy and surface quality in castings.
(3) The document outlines the history and increasing applications of V-process casting in China. It is now used for castings in various industries such as machinery, rail, automotive, and more. The technology and equipment for V-process casting in China has also advanced greatly.
The document provides details of various construction and renovation projects carried out at a starch plant, including: building a labour shed, extracting and repairing boundary walls, making a security post, constructing rainwater drains and roads, building an effluent treatment plant with various tanks, carrying out mechanical work on metal tanks, modifying buildings like warehouses and factories, and miscellaneous other projects like installing a power substation and building a flower garden. Extensive work was done on estimating costs, obtaining quotations, checking tenders, carrying out construction tasks, and verifying bills.
This document specifies requirements for different classes of concrete to be used in construction. It outlines seven classes (K140 to K500) with minimum crushing strengths for preliminary and work tests at both 7 and 28 days. It also lists maximum water-cement ratios and minimum cement contents for each class. The document states that if weather conditions could affect quality, the specified strength may be increased by 50 kg/cm2. It provides instructions for examining forms and reinforcement, preparing existing concrete, drilling dowels, and placing new concrete in compliance with standards, with notifications required before each pour. Hot and cold weather concreting procedures are also referenced.
M. R. ENGINEERING are well known manufacturer, exporter and supplier of a comprehensive range of batching plant spares, concrete batching plant spares, concrete batching plant, concrete pump spares, concrete pump spare parts available in various sizes and shapes to suit clients' specific needs.
Unimax International Limited, a reputable manufacturer and exporter for various kinds of fluid sealing and thermal insulation products, such as compression packings, sealing gaskets, gasket sheets, rubber sheets, etc, is committed to supplying quality products with reasonable prices to the customers around the world.
This document provides an overview of Tianjin Boai Group, a Chinese steel pipe manufacturer. It summarizes the company's subsidiaries, history since 2003, management team, production facilities including ERW and coating lines, product portfolio, quality inspection processes, marketing strategies, certifications, sales network, major customers, and corporate culture emphasizing teamwork. The company has over 300,000 square meters of facilities, 498 employees including 50 engineers, and produces over 150,000 tons of steel pipe annually.
EFFECT OF CASTING PARAMETERS ON MACROSTRUCTURE OF STEELSurya Teja Botu
The document summarizes a student project conducted at Vizag Steel Plant investigating the effect of casting parameters on the macrostructure of steel. It was presented by five students and guided by P.V. Bhujanga Rao of Vizag Steel Plant. The project examined how melt temperature and casting speed influence steel structure and defect formation during continuous casting, and modeled temperature and melt flow in the caster sump. It provides background on Vizag Steel Plant and describes its raw material sources, production units including coke ovens, sinter plant, blast furnaces, and rolling mills.
An Introduction to the INDAC EzyTap SystemPeter Jameson
This document introduces the EZY Tap, a new product designed for low pressure piping and water tanks. It can be easily externally fixed through a rubber seal that swells when tightened to create a water tight seal. Key advantages include reducing stress on tank walls, quick and easy installation without highly trained personnel, almost no risk of damage to the product being fitted, and replacing damaged inserts. It has a recommended pressure range of 1-60 PSI and temperature range of -20 to 100 degrees Celsius. Purchase requires only a drill and hole saw for safe installation from outside the tank.
Loesche Mills for Cement and Granulated Blast Furnace SlagLOESCHE
Grinding of cement clinker and granulated blast furnace slag in roller grinding mills (vertical airswept grinding mills) is a technology introduced by Loesche. The first use of a Loesche mill, with a grinding track diameter of only 1.1 meters, was used as log ago as 1935. However, the breakthrough in grinding this type of material on the vertical roller mill did not take place until the beginning of the 1990s.
J.K. Cement Ltd is an affiliate of the J.K. organization, founded by Lala Kamlapat Singhania. It started commercial cement production in 1975 in Nimbahera, Rajasthan. The key raw materials used are limestone and clay. There are three major operations: mixing, burning, and grinding. The cement manufacturing process involves quarrying raw materials, crushing, grinding, preheating, burning in a kiln at 1500°C to produce clinker, grinding the clinker into cement powder, and storage and packing. J.K. Cement produces various grades of Ordinary Portland Cement and other cement types like rapid hardening, white, and waterproof cement.
Loesche Technology - Always a Step Ahead: Loesche Mills for Cement Raw MaterialLOESCHE
Cement raw material has been almost exclusively ground in roller mills (vertical air-swept grinding mills) since the second half of the 20th Century. Loesche was and is the pioneer of this technology. Hundreds of Loesche mills have been used in the cement industry across the world to the present day. They operate with two, three, four and six rollers.
This document provides an overview of squeeze casting, including its background, process, advantages, and key parameters. Squeeze casting involves pouring molten metal into a die and applying high pressure until solidification is complete. This produces near-net shape castings with reduced porosity and mechanical properties approaching wrought products due to rapid solidification under pressure. Key parameters that affect the process include alloy composition, die design, temperature, applied pressure, and time under pressure. Squeeze casting can produce complex components from various alloys, such as aluminum and magnesium, with properties superior to conventional casting.
The Cosworth process is a precision sand casting method developed in 1987 for high volume production of high-quality aluminum automotive castings. It uses an electromagnetic pump to slowly displace molten metal from the mid-depth of a holding furnace into molds in a non-turbulent manner, minimizing oxide films. This results in castings with no porosity, improved mechanical properties, and thinner sections allowing lighter components. While installation costs are high, it produces castings suitable for applications like helicopter and aircraft engines due to their high integrity and strength.
Gating System
Manufacturing Process
Manufacturing Technology
INTRODUCTION
COMPONENTS OF GATING SYSTEM
TYPES OF GATE
FUNCTION OF GATING SYSTEM
CHILLS
GATING RATIO
DEFECTS OCCURING DUE TO IMPRORER DESIGN OF GATING SYSTEM
Thixocasting or semi solid metal castingIlyas Hussain
Thixocasting is a near-net shape forming process that uses partially molten alloys. It involves three steps: 1) Producing a pre-cast billet with a globular microstructure through electromagnetic stirring, 2) Reheating the billet to the semi-solid temperature, and 3) Casting the component by pressing the billet into a die cavity. Thixocasting provides benefits like energy efficiency, dimensional accuracy, and fine microstructures. However, it requires strict control of parameters like temperature and stirring. Common applications include automotive components like engine mounts and housings.
The document describes a ceramic knife gate valve that features a ceramic sealing ring and single seat design to prevent sticking and residue accumulation. It is suitable for conveying liquid-solid mixtures like ash, slurry, and sewage through systems like coal mills. The valve has a ceramic sealing ring, stem, and disc surrounded by a body and yoke made of cast carbon steel. It comes in sizes from 2.5 to 14 inches for pressures up to class 150 and temperatures from -40 to 150 degrees Celsius.
This document summarizes a ceramic press column manufactured by CHAENG. The column supports the upper beam and cylinder of the ceramic press and guides the crossbeam. CHAENG uses high strength materials and heat treatment to ensure the column has strong wear resistance while reducing weight. They have skilled technicians and modern equipment to guarantee internal and external quality. CHAENG has provided successful ceramic press columns to ceramic manufacturers in various Chinese provinces.
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
This document provides notes on the facade assembly line process for Ventana DBS. The 11-step process includes: 1) storing extrusions and glass, 2) cutting extrusions, 3) CNC machine cutting, 4) sealing horizontals to verticals, 5) stacking galvanized backpan, 6) stacking insulation, 7) stacking shadowbox, 8) stacking glass on top, 9) sealing with structural silicone, 10) installing reveals with gaskets, and 11) caulking reveals. Additional details are provided on boxing, cutting, CNC machine use, sealing, and structural silicone application.
SINOM GROUP CO., LTD. is one of the largest manufacturer of copper mould tube in China. Based on customers requirement, we design, manufacture and install the square copper mould tube, round copper mould tube, beam blank, rectangular copper mould tube, diamond type, non-standard type etc.
Development and Progress of V-process in Chinazhang jianman
(1) The document discusses the development and progress of V-process casting in China. It began being studied in 1974 and has grown significantly, with over 500 firms now using the technique.
(2) The key aspects of V-process casting are that it uses vacuum instead of binders in the sand mold. This allows for high dimensional accuracy and surface quality in castings.
(3) The document outlines the history and increasing applications of V-process casting in China. It is now used for castings in various industries such as machinery, rail, automotive, and more. The technology and equipment for V-process casting in China has also advanced greatly.
The document provides details of various construction and renovation projects carried out at a starch plant, including: building a labour shed, extracting and repairing boundary walls, making a security post, constructing rainwater drains and roads, building an effluent treatment plant with various tanks, carrying out mechanical work on metal tanks, modifying buildings like warehouses and factories, and miscellaneous other projects like installing a power substation and building a flower garden. Extensive work was done on estimating costs, obtaining quotations, checking tenders, carrying out construction tasks, and verifying bills.
This document specifies requirements for different classes of concrete to be used in construction. It outlines seven classes (K140 to K500) with minimum crushing strengths for preliminary and work tests at both 7 and 28 days. It also lists maximum water-cement ratios and minimum cement contents for each class. The document states that if weather conditions could affect quality, the specified strength may be increased by 50 kg/cm2. It provides instructions for examining forms and reinforcement, preparing existing concrete, drilling dowels, and placing new concrete in compliance with standards, with notifications required before each pour. Hot and cold weather concreting procedures are also referenced.
M. R. ENGINEERING are well known manufacturer, exporter and supplier of a comprehensive range of batching plant spares, concrete batching plant spares, concrete batching plant, concrete pump spares, concrete pump spare parts available in various sizes and shapes to suit clients' specific needs.
Unimax International Limited, a reputable manufacturer and exporter for various kinds of fluid sealing and thermal insulation products, such as compression packings, sealing gaskets, gasket sheets, rubber sheets, etc, is committed to supplying quality products with reasonable prices to the customers around the world.
This document provides an overview of Tianjin Boai Group, a Chinese steel pipe manufacturer. It summarizes the company's subsidiaries, history since 2003, management team, production facilities including ERW and coating lines, product portfolio, quality inspection processes, marketing strategies, certifications, sales network, major customers, and corporate culture emphasizing teamwork. The company has over 300,000 square meters of facilities, 498 employees including 50 engineers, and produces over 150,000 tons of steel pipe annually.
EFFECT OF CASTING PARAMETERS ON MACROSTRUCTURE OF STEELSurya Teja Botu
The document summarizes a student project conducted at Vizag Steel Plant investigating the effect of casting parameters on the macrostructure of steel. It was presented by five students and guided by P.V. Bhujanga Rao of Vizag Steel Plant. The project examined how melt temperature and casting speed influence steel structure and defect formation during continuous casting, and modeled temperature and melt flow in the caster sump. It provides background on Vizag Steel Plant and describes its raw material sources, production units including coke ovens, sinter plant, blast furnaces, and rolling mills.
An Introduction to the INDAC EzyTap SystemPeter Jameson
This document introduces the EZY Tap, a new product designed for low pressure piping and water tanks. It can be easily externally fixed through a rubber seal that swells when tightened to create a water tight seal. Key advantages include reducing stress on tank walls, quick and easy installation without highly trained personnel, almost no risk of damage to the product being fitted, and replacing damaged inserts. It has a recommended pressure range of 1-60 PSI and temperature range of -20 to 100 degrees Celsius. Purchase requires only a drill and hole saw for safe installation from outside the tank.
Loesche Mills for Cement and Granulated Blast Furnace SlagLOESCHE
Grinding of cement clinker and granulated blast furnace slag in roller grinding mills (vertical airswept grinding mills) is a technology introduced by Loesche. The first use of a Loesche mill, with a grinding track diameter of only 1.1 meters, was used as log ago as 1935. However, the breakthrough in grinding this type of material on the vertical roller mill did not take place until the beginning of the 1990s.
J.K. Cement Ltd is an affiliate of the J.K. organization, founded by Lala Kamlapat Singhania. It started commercial cement production in 1975 in Nimbahera, Rajasthan. The key raw materials used are limestone and clay. There are three major operations: mixing, burning, and grinding. The cement manufacturing process involves quarrying raw materials, crushing, grinding, preheating, burning in a kiln at 1500°C to produce clinker, grinding the clinker into cement powder, and storage and packing. J.K. Cement produces various grades of Ordinary Portland Cement and other cement types like rapid hardening, white, and waterproof cement.
Loesche Technology - Always a Step Ahead: Loesche Mills for Cement Raw MaterialLOESCHE
Cement raw material has been almost exclusively ground in roller mills (vertical air-swept grinding mills) since the second half of the 20th Century. Loesche was and is the pioneer of this technology. Hundreds of Loesche mills have been used in the cement industry across the world to the present day. They operate with two, three, four and six rollers.
This document provides an overview of squeeze casting, including its background, process, advantages, and key parameters. Squeeze casting involves pouring molten metal into a die and applying high pressure until solidification is complete. This produces near-net shape castings with reduced porosity and mechanical properties approaching wrought products due to rapid solidification under pressure. Key parameters that affect the process include alloy composition, die design, temperature, applied pressure, and time under pressure. Squeeze casting can produce complex components from various alloys, such as aluminum and magnesium, with properties superior to conventional casting.
The Cosworth process is a precision sand casting method developed in 1987 for high volume production of high-quality aluminum automotive castings. It uses an electromagnetic pump to slowly displace molten metal from the mid-depth of a holding furnace into molds in a non-turbulent manner, minimizing oxide films. This results in castings with no porosity, improved mechanical properties, and thinner sections allowing lighter components. While installation costs are high, it produces castings suitable for applications like helicopter and aircraft engines due to their high integrity and strength.
Gating System
Manufacturing Process
Manufacturing Technology
INTRODUCTION
COMPONENTS OF GATING SYSTEM
TYPES OF GATE
FUNCTION OF GATING SYSTEM
CHILLS
GATING RATIO
DEFECTS OCCURING DUE TO IMPRORER DESIGN OF GATING SYSTEM
Thixocasting or semi solid metal castingIlyas Hussain
Thixocasting is a near-net shape forming process that uses partially molten alloys. It involves three steps: 1) Producing a pre-cast billet with a globular microstructure through electromagnetic stirring, 2) Reheating the billet to the semi-solid temperature, and 3) Casting the component by pressing the billet into a die cavity. Thixocasting provides benefits like energy efficiency, dimensional accuracy, and fine microstructures. However, it requires strict control of parameters like temperature and stirring. Common applications include automotive components like engine mounts and housings.
The document describes a ceramic knife gate valve that features a ceramic sealing ring and single seat design to prevent sticking and residue accumulation. It is suitable for conveying liquid-solid mixtures like ash, slurry, and sewage through systems like coal mills. The valve has a ceramic sealing ring, stem, and disc surrounded by a body and yoke made of cast carbon steel. It comes in sizes from 2.5 to 14 inches for pressures up to class 150 and temperatures from -40 to 150 degrees Celsius.
This document summarizes a ceramic press column manufactured by CHAENG. The column supports the upper beam and cylinder of the ceramic press and guides the crossbeam. CHAENG uses high strength materials and heat treatment to ensure the column has strong wear resistance while reducing weight. They have skilled technicians and modern equipment to guarantee internal and external quality. CHAENG has provided successful ceramic press columns to ceramic manufacturers in various Chinese provinces.
Moving jaw plate for jaw crusher
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
CHAENG (Great Wall Steel Casting), a professional steel casting manufacturer, manufacturing large steel castings according to customer's drawings.
www.partscasting.com
E-mail: casting@chaeng.co
The document discusses cylinder blocks used in press machines. Cylinder blocks must withstand high pressures and stresses without defects. They are made of materials like ZG45 by selecting molds and simulating the casting process. The blocks have been widely used in metallurgy, chemical, and construction industries in China and exported to other countries. They provide stable performance, simple technology, and low air viscosity. The manufacturer offers cost-effective production, fast delivery, and customer support.
Vertical roller mill rocker arm, vertical mill swing arm:
It is important part of vertical roller mill. The file is to introduce the vertical mill rocker arm made by CHAENG.
-- CHAENG (Great Wall Steel Casting) is experienced in manufacturing steel casting parts for vertical roller mill.
www.partscasting.com
E-mail: casting@chaeng.co
CHAENG manufactures high quality ball mill liners using specific processes to ensure product quality. First, high manganese scrap steel, alloys, and other materials are melted and treated with microalloying in an electric furnace. Second, a constant temperature pouring method is used to prevent defects like sand or porosity. Finally, annealing technology and spectral detection are used to control the inner structure, composition, and performance. The liners produced have advantages like long service life from high manganese steel, quality control from pouring, and hardness from heat treatment. CHAENG has over 60 years of experience manufacturing ball mills and other equipment for the cement industry.
The autoclave is a key piece of equipment in AAC block production lines. It cures cut bodies and autoclaved bricks under high temperature and pressure. Autoclaves are made of steel in a horizontal barrel shape from 16MnR steel. They are classified as pressure vessels and require safety certification to operate. Autoclaves are used to cure silicate bricks and other cement products through high-temperature steaming.
Hunan Kingcera Engineering Co.,Ltd is an manufacturer of Al2O3 alumina ceramic wear resistant material, like ZTA ceramic liner, ceramic lined elbow, ceramic lined sleeve, ceramic lined chute, ceramic lined hopper. We provide the service for 4 main minings in Australia, such as FMG, Roy Hill, Rio Tinto, BHP.
Please contact us via info@kingcera.com to get more details.
Machines Engineering power point slide.pptArfanAli50
Shanghai Best Alloy Co., Ltd is a Chinese manufacturer of seamless steel tubes established in 1994. They have extensive production capabilities including electric furnaces, pilger mills, and extrusion equipment. Their manufacturing process involves melting, forming, rolling or drawing, heat treatment, and quality inspection. They produce high temperature alloy tubes, boiler tubes, and stainless steel tubes to standards like ASTM and GB. Their quality system is ISO 9001 certified and they have contact information listed for sales in China, Turkey, the US, and Iran.
Atecon products focus on solving the dilemma on how to guarantee the proper cover or distancing between the metallic structure (rebar) and the terrain or formwork.
In any type of of construction site our Accessories will help you achieve better efficiencies, security and productivity
This document provides a demo report for stainless steel finishing tools and accessories from Inox for a proposed stainless steel workshop. It details 5 steps for removing and smoothing a fillet weld using various grinding, polishing, and cleaning tools. It also proposes other machines for the workshop and provides information on factors that influence stainless steel finishing like grade, environment, abrasives used, and machine speed. Proper procedure and use of carbon-free abrasives are emphasized for obtaining the desired mirror polish finish without discoloration.
This document discusses advanced ceramics, including their definition, properties, classifications, and production methods. Specifically, it defines advanced ceramics as highly refined ceramic materials used as engineering materials due to properties like high temperature resistance and strength. It classifies advanced ceramics into three main categories - oxide ceramics, non-oxide ceramics, and ceramic matrix composites. The document also outlines typical production processes for advanced ceramics, including raw material preparation, shaping, and high-temperature firing or sintering.
Introduction of CHAENG kiln tyre: process, material, features, ect..
-- CHAENG (Great Wall Steel Casting) is professional in manufacturing spare parts for rotary kiln, ball mill, vertical roller mill, and other heavy equipment.
www.partscasting.com
E-mail: casting@chaeng.co
Pulse Electrical Current Assisted Sinter Rolling MillWassim Shirry
This document is a final report submitted by a group of mechanical engineering students to their professor for a project designing and building a powder rolling mill fitted with spark plasma sintering. The report details the design of the machine, which aims to simultaneously roll and sinter powdered aluminum into a continuous strip. It includes sections on the problem definition, concept generation and evaluation, final design embodiment, and a liability statement. The group is proud to present not only the design report but a working prototype to the professor.
Case study for material selection (Automobile Silencer)Nishit Karkar
This document discusses material selection for automobile silencers and catalytic converters. It provides details on the manufacturing process, technical aspects, and criteria for selecting materials for silencers. Common materials used include steel, stainless steel, cast iron, and alloys for their mechanical properties, corrosion resistance, and ability to withstand high exhaust temperatures. The document also discusses the material requirements and alternatives for catalytic converters, focusing on a ferrite alloy and stainless steel sheet that is pre-oxidized to provide a surface for catalyst adhesion.
Pavan Pressure Cast is a leading manufacturers, exporters and wholesale suppliers of aluminium castings, aluminium flanges, aluminum sand castings, die castings, gravity die castings and lots more. more information please visit our website:http://www.exportersindia.com/pavan-pressure-cast/.
ASK Automotive is a leading manufacturer of friction products for two-wheelers in India founded in 1989. Over two decades, it has grown from a small manufacturer to a major supplier of brake assemblies, brake shoes, and other automotive parts to OEMs in India. The company aims to make its products the first choice of users. It manufactures brake shoes and other friction products through a process that includes melting aluminum alloy, die casting, trimming, lapping, inspection, and packaging. Quality is ensured through certifications and a JIT production system with zero PPM defects.
This document provides an overview of the products and services offered by KALTENBACH, a 125-year-old manufacturer of machines for steel processing. It describes their range of band sawing machines, circular saws, drilling machines, coping robots, punching and shearing systems, and plate processing centers. It also discusses their offerings for thermal cutting, sawing, drilling, punching, shearing, transporting, measuring, painting, and other applications. The document aims to demonstrate KALTENBACH's full portfolio of solutions for steel fabrication and their expertise in boosting customers' efficiency through high-performance machines and advisory services.
The causes of rotary kiln girth gear vibrationIris Han
The document discusses the common causes of vibration in large girth gears used in rotary kilns. The main causes are worn or loose connecting parts allowing misalignment of gear components, general wear of supporting parts causing the kiln to sink unevenly, bending of the kiln during cold testing, and excessive runout or yaw values and clearances within the girth gear itself. Addressing these root causes through repair and replacement of worn parts can help eliminate girth gear vibration issues and maintain normal operation of rotary kilns.
Rotary kiln shell segments process and casesIris Han
Rotary kiln shell segments manufacturing process and cases made by CHAENG.
CHAENG (Xinxiang Great Wall Steel Casting Co., Ltd)
Website: www.partscasting.com Email: casting@chaeng.co
Here is a brief description of the location of ball mill which is prone to abnormal noise.
CHAENG (Xinxiang Great Wall Steel Casting Co., Ltd)
Website: www.partscasting.com
Email: casting@chaeng.co
Cement rotary kiln supporting roller and bearing structureIris Han
Support roller assemblies can be divided into sliding-bearing support roller set, rolling-bearing support roller set and sliding-rolling bearing support roller set.
CHAENG specializes in the production of kiln equipment for many years. The support roller assemblies produced by CHENG adopt rolling bearings.
Website: www.partscasting.com
Email: casting@chaeng.co
Then how to get the price of customized large steel casting like ball mill trunnion cover? CHAENG is experienced in manufacturing customized large steel castings for ball mill, and we calculate the price of the steel casting according to customers’ drawings.
CHAENG - Xinxiang Great Wall Steel Casting Co., Ltd
www.partscasting.com
E-mail: casting@chaeng.co
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
An improved modulation technique suitable for a three level flying capacitor ...IJECEIAES
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
Applications of artificial Intelligence in Mechanical Engineering.pdfAtif Razi
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
1. Ceramic press base
Introduction
The base is one of the important parts in the ceramic press, which is
equivalent of upper and lower beams and is the workbench of ceramic press.
The ceramic press base directly contacts with the floor plate, and transmit the
supporting force of support bracket to floor plate. Its deformation and other
characteristics will directly affect the machining quality of work piece.
Therefore, to select wear-resistant, durable and strong compressive base is
the effective guarantee of the normal operation of the whole set of equipment.
Weight 10-50T
Material ZG270-500
Application Building materials and other industries
Customizable Yes
Processing advantages
2. 1. CHAENG improves the traditional design to optimize the structure of the
ceramic press base, so as to avoid the too-heavy ceramic press base and
material waste, and effectively improve the mechanical properties of ceramic
press base;
2. CHAENG uses the high quality ZG270-500 material, so that CHAENG
ceramic press base has higher compressive strength, stronger tensile capacity,
and longer service life;
3. CHAENG has two sets of 30 tons alkaline arc furnace, 4 large natural gas
annealing furnace. The advanced and perfect equipment greatly ensure the
quality of ceramic press base.
4. CHAENG has many years of experience in casting ceramic press base,
after years of development, CHAENG has formed a set of feasible base
ceramic press processing scheme. CHAENG can design and manufacture of
ceramic press base according to the ceramic base structure and mechanical
characteristics, so as to ensure the accuracy and reliability of ceramic press
base.
3. Process
Base on the requirements of customers, CHAENG selects appropriate wooden
mold for modeling design, and uses CAE software to simulate the casting
process. Strictly according to the process procedures to produce high-quality
ceramic press base: wood mold - modelling - pouring - heat preservation - out
of the pit, sand cleaning - heat treatment - roughing, finishing - packing and
delivery.
Case
By now, CHAENG ceramic press bases have been applied in the manufacture
of brick press and ceramic machine many companies in Guangdong, Hubei,
Jiangsu and Zhejiang, and exported to Italy.
4. Fig. CHAENG ceramic press base customized for Italian customers
Chaeng Service
1. Cost-effective
CHAENG has the top-ranking casting equipment, strictly follows the national
lever-2 detection standards, and executes 360° all-round nondestructive
testing system, to ensure the reliable quality and long service life of steel
castings. CHAENG is hailed as "the most cost-effective steel castings
manufacturer".
2. Fast delivery
CHAENG has strong technical teams, detailed production scheduling, wide
range of raw materials purchase channels, and perfect logistics delivery
system, making efforts to achieve the shortest delivery period in china.
3. “Three-heart” service
5. The 24h fast response and the customer services in all 365 days rest your
heart when you make choice, ease your heart when you use the products,
satisfy your heart when you enjoy the services.
CHAENG - Xinxiang Great Wall Steel Casting Co., Ltd
Website: www.partscasting.com
Tel: 86-371-55019878
Skype: greatwall1958
Fax: 86-371-55019608
E-mail: casting@chaeng.co
Office Add: Mengzhuang Town, Huixian City, Henan Province, China
Postcode: 453600