Here is a brief description of the location of ball mill which is prone to abnormal noise. CHAENG (Xinxiang Great Wall Steel Casting Co., Ltd) Website: www.partscasting.com Email: casting@chaeng.co

1. Reasons search for abnormal noise in ball mill
If the ball mill has abnormal noise, it is necessary to check the reason in time. The most
direct way is to check from the sound source. Here is a brief introduction to the parts of the
ball mill that are prone to abnormal noise:
1. After the ball mill is turned on, it is found that the ball mill trunnion has abnormal
noise.
Check the trunnion for foreign matter and debris; check the trunnion for offsets, and check
whether the trunnion is short of oil.
2. The pinion at the connection between the reducer and the motor makes an
abnormal sound.
Check if the gearbox temperature is higher than usual. Check the coaxiality of the reducer
and the motor.
3. The abnormal sound of the reducer
Check the inside of the reducer for metal impurities; check the meshing performance of
the gear; check the clearance between the reducer bearings; check the gears and
bearings for excessive wear and damage; and whether the fixed screws are loose.
4. Abnormal noise occurs in the ball mill cylinder
When the ball mill is running, if it is found that the sound inside the cylinder becomes
sharp for quite a while, it is necessary to stop and check whether the lining is broken or
damaged; check whether the ore is insufficient and check whether there is any other
metal foreign matter in the cylinder.
If there is intermittent and dull shock inside the cylinder, it may be that a certain liner is
detached; if the ball mill suddenly discharges the small steel ball and the ore slag, it
means that the internal lattice plate is damaged.
Abnormal noise during ball mill operation is one of the most common problems in ball mill
failure. It is mostly caused by loose parts in the mill. When you hear the ball mill has
abnormal noise, stop feeding the mill. After the material in the mill is ground, stop the mill
for inspection. First look at whether the lining bolts are loose, the loosening of the lining
bolts will be impacted by the steel balls, so it will produce a strong sound, then look at the
lubrication of the cylindrical rolling bearing is effective, the failure of the rolling bearing
lubrication will cause the bearing to run poorly, and will also lead to the ball mill abnormal
noise occurred inside. In order to prevent the ball mill from malfunctioning, after each
continuous operation, technicians should be arranged for small-scale inspection and
maintenance to kill the problem initially.
CHAENG (Xinxiang Great Wall Steel Casting Co., Ltd)
Office Add: Mengzhuang Town, Huixian City, Henan Province, China
Postcode: 453600
Website: www.partscasting.com
Email: casting@chaeng.co
Tel: 86-371-55019878
Skype: greatwall1958