This technical reference manual provides an overview of the architectural features and peripherals of the CC13x2 and CC26x2 wireless microcontroller units. It describes the ARM Cortex-M4F processor core and associated debug and trace components. It also covers on-chip memory, the radio, security core, timers, DMA, serial communication peripherals, programmable I/Os, sensor controller, random number generator, JTAG interface, power management, instruction memory system, SRAM, bootloader, device configuration, cryptography module, I/O controller, and micro DMA. Registers for each component are documented.
Learn about the IBM Power 710 and Power 730 servers supporting AIX, IBM i, and Linux operating systems, their offerings and prominent functions. For more information on Power Systems , visit http://ibm.co/Lx6hfc.
Visit the official Scribd Channel of IBM India Smarter Computing at http://bit.ly/VwO86R to get access to more documents.
This document provides an overview of CrossFire Communications C's SUNWAVE'S GLOBAL CHANNEL system. The system uses an all-digital solution to provide multi-operator, multi-service support across multiple standards. It allows for diverse capacity expansion and flexible cell division. Key features include support for MIMO, low power consumption, modular design, and a network management system for monitoring network topology and large-scale systems. The technical description section provides details on system components like the access unit, expansion unit, remote unit, and point of interface. It also describes the network management system functions.
This document provides a summary of the HiPath 4000 V6 system software components, including:
- Descriptions of hardware configurations, licensing, applications, and the hard disk layout.
- Details on the HiPath 4000 Assistant, including its applications, user accounts, and notification mechanisms.
- An overview of the HiPath 4000 CSTA software component.
The document contains technical information on the various software aspects that make up the HiPath 4000 V6 communication system.
Ibm power vc version 1.2.3 introduction and configurationgagbada
This document provides an introduction and overview of IBM PowerVC version 1.2.3, including:
- A high-level overview of PowerVC and how it uses OpenStack for virtualization management on Power Systems.
- Details of new features and enhancements in PowerVC versions 1.2.2 and 1.2.3, such as improved image management, monitoring, storage support, and scaling.
- Planning guidance for installing and configuring PowerVC, including hardware and software requirements, host and partition management, storage access, and template design.
Learn about IBM BladeCenter Products and Technology. IBM designed the IBM BladeCenter E (machine type 8677) to be a highly modular chassis to accommodate a range of diverse business requirements.The BladeCenter E superior density and feature set are made possible by the BladeCenter E innovative chassis architecture. To know more about Pure systems, visit http://ibm.co/J7Zb1v.
Visit http://bit.ly/KWh5Dx to 'Follow' the official Twitter handle of IBM India Smarter Computing.
TechBook: EMC VPLEX Metro Witness Technology and High Availability EMC
This TechBook describes how implementation of EMC VPLEX leads to a higher level of availability. It also introduces VPLEX High Availability and the VPLEX Witness.
TechBook: EMC Compatibility Features for IBM Copy Services on z/OSEMC
This TechBook provides an introduction to EMC’s compatibility features for IBM’s Advanced Copy Services technologies. A configuration and operations compatibility quick guide for PPRC, XRC, and FlashCopy features supported by EMC is included. An overview of common deployments of Advanced Copy Services features, the degree of EMC’s compliance with those features, and EMC’s role in the deployment and operations of GDPS are discussed.
This document provides an overview and introduction of the IBM Power S1014, S1022s, S1022, and S1024 servers. It describes the key features and specifications of these systems including their IBM Power10 processors, memory support, I/O and storage options, operating system support, and more. It also discusses the IBM solutions and technologies that can be used with these Power servers, such as the IBM PowerSC management framework, PowerVC virtualization software, and Red Hat OpenShift Container Platform.
Learn about the IBM Power 710 and Power 730 servers supporting AIX, IBM i, and Linux operating systems, their offerings and prominent functions. For more information on Power Systems , visit http://ibm.co/Lx6hfc.
Visit the official Scribd Channel of IBM India Smarter Computing at http://bit.ly/VwO86R to get access to more documents.
This document provides an overview of CrossFire Communications C's SUNWAVE'S GLOBAL CHANNEL system. The system uses an all-digital solution to provide multi-operator, multi-service support across multiple standards. It allows for diverse capacity expansion and flexible cell division. Key features include support for MIMO, low power consumption, modular design, and a network management system for monitoring network topology and large-scale systems. The technical description section provides details on system components like the access unit, expansion unit, remote unit, and point of interface. It also describes the network management system functions.
This document provides a summary of the HiPath 4000 V6 system software components, including:
- Descriptions of hardware configurations, licensing, applications, and the hard disk layout.
- Details on the HiPath 4000 Assistant, including its applications, user accounts, and notification mechanisms.
- An overview of the HiPath 4000 CSTA software component.
The document contains technical information on the various software aspects that make up the HiPath 4000 V6 communication system.
Ibm power vc version 1.2.3 introduction and configurationgagbada
This document provides an introduction and overview of IBM PowerVC version 1.2.3, including:
- A high-level overview of PowerVC and how it uses OpenStack for virtualization management on Power Systems.
- Details of new features and enhancements in PowerVC versions 1.2.2 and 1.2.3, such as improved image management, monitoring, storage support, and scaling.
- Planning guidance for installing and configuring PowerVC, including hardware and software requirements, host and partition management, storage access, and template design.
Learn about IBM BladeCenter Products and Technology. IBM designed the IBM BladeCenter E (machine type 8677) to be a highly modular chassis to accommodate a range of diverse business requirements.The BladeCenter E superior density and feature set are made possible by the BladeCenter E innovative chassis architecture. To know more about Pure systems, visit http://ibm.co/J7Zb1v.
Visit http://bit.ly/KWh5Dx to 'Follow' the official Twitter handle of IBM India Smarter Computing.
TechBook: EMC VPLEX Metro Witness Technology and High Availability EMC
This TechBook describes how implementation of EMC VPLEX leads to a higher level of availability. It also introduces VPLEX High Availability and the VPLEX Witness.
TechBook: EMC Compatibility Features for IBM Copy Services on z/OSEMC
This TechBook provides an introduction to EMC’s compatibility features for IBM’s Advanced Copy Services technologies. A configuration and operations compatibility quick guide for PPRC, XRC, and FlashCopy features supported by EMC is included. An overview of common deployments of Advanced Copy Services features, the degree of EMC’s compliance with those features, and EMC’s role in the deployment and operations of GDPS are discussed.
This document provides an overview and introduction of the IBM Power S1014, S1022s, S1022, and S1024 servers. It describes the key features and specifications of these systems including their IBM Power10 processors, memory support, I/O and storage options, operating system support, and more. It also discusses the IBM solutions and technologies that can be used with these Power servers, such as the IBM PowerSC management framework, PowerVC virtualization software, and Red Hat OpenShift Container Platform.
This document provides an introduction and overview of NVIDIA's CUDA programming model and API:
- CUDA (Compute Unified Device Architecture) allows developers to use GPUs for general purpose processing beyond graphics. The GPU is treated as a highly multithreaded coprocessor.
- The programming model uses a grid of thread blocks, with threads running SIMD-style on the GPU's multiprocessors. Threads within a block can cooperate via shared memory and synchronize.
- The CUDA API extends C/C++ with keywords to specify kernel functions, memory spaces, and launch configurations. It provides functions for memory management and kernel execution on the GPU.
This user manual provides instructions for operating the Phasor XS portable phased array ultrasonic flaw detector. It describes how to power the device, navigate menus, install and configure probes, perform scans and calibrations, and view and analyze scan results. The manual contains information on keypad functions, display screens, setup parameters, gate settings, and operating the device in various modes like freeze, gain adjustment, and time-corrected gain for phased array non-destructive testing.
This document provides an operation and maintenance manual for the MUX-2200E Integrated Service Multiplexer. The manual contains information on installing and connecting the multiplexer, descriptions of connector pinouts, instructions for management and configuration through the front panel and network ports, and maintenance procedures. It includes chapters on introduction and features, installation, connector pinouts, management, configuration, and maintenance, as well as annexes with CLI commands, control menus, and cable definitions.
Intel добавит в CPU инструкции для глубинного обученияAnatol Alizar
This document provides an overview and reference for Intel's AVX-512 instruction set extensions. It discusses the key features of AVX-512 including 512-bit wide SIMD register and instruction support. It also describes the AVX-512 programming model and application programming interface, covering aspects such as register usage, instruction encoding, exception handling and programming interfaces like CPUID. The document also discusses system programming considerations for AVX-512 including state management using instructions like XSAVE, reset behavior, and exception handling.
TechBook: IMS on z/OS Using EMC Symmetrix Storage SystemsEMC
This document provides guidance on using EMC storage solutions with IMS databases on z/OS, describing IMS components, EMC foundation products like Symmetrix and TimeFinder, advanced storage provisioning techniques, cloning IMS databases, backing up and recovering IMS environments, disaster recovery planning, and performance optimization. It is intended to help database and storage administrators understand how to leverage EMC technologies to enhance the performance, availability, and management of IMS databases on the mainframe.
This document provides instructions for installing and configuring IBM TotalStorage Productivity Center for Replication on AIX systems. It includes information on hardware and software requirements, pre-installation steps, installing required software like DB2, installing TPC for Replication, configuring storage systems and network connectivity, and creating replication sessions between storage systems using TPC for Replication's graphical user interface and command line. The document is intended to help users effectively set up and use TPC for Replication to manage replication services from a single point of control.
This document provides information about installing and using IBM TotalStorage Productivity Center for Replication on AIX systems. It includes details about hardware and software requirements, installation steps, configuration procedures, and usage basics. The document aims to help effectively set up and manage replication services from a single graphical interface.
The BiPAC 7300NX/N RE is a wireless router that provides:
- High-speed wireless access up to 300Mbps and ADSL2+ connectivity for broadband access.
- Dual WAN options - the BiPAC 7300NX includes a USB port to connect a 3G modem for backup internet, while the BiPAC 7300N RE can use its port 1 as a WAN port.
- Integrated firewall, wireless security features, and quality of service controls to prioritize data traffic.
- Easy setup and management through a web-based interface for remote or local administration.
This document provides an operation manual for the SYSMAC CS Series CS1D Duplex System, which includes:
1. CS1D-CPU@@H CPU Units, CS1D-DPL01 Duplex Unit, and CS1D-PA/PD@@@ Power Supply Unit.
2. The system allows for duplex operation to improve reliability through redundant processing and power supply units.
3. The document covers specifications, configuration, installation, wiring, programming, and operation of the CS1D Duplex System components.
Networking for Storage Virtualization and EMC RecoverPoint TechBook EMC
This EMC Engineering TechBook provides a high-level overview of using block storage virtualization solutions, such as EMC VPLEX and Invista, as well as RecoverPoint replication protection. Basic information on interswitch link hops, along with examples showing hop counts in four different fabric configurations, are included.
Motorola ap650 access point installation guide (part no. 72 e 131207-01 rev. d )Advantec Distribution
The document provides instructions for installing the Motorola AP-650 Thin Access Point, which can be mounted on a wall or suspended ceiling. It includes details on package contents, placement guidelines, wall and ceiling mounting procedures, and specifications. The integrated antenna model mounts using wall screws or clips on a suspended ceiling T-bar. The external antenna model also mounts on walls or ceilings and has options for external antenna connections.
Motorola ap650 access point installation guide (part no. 72 e 131207-01 rev. d )Advantec Distribution
The document provides installation instructions for the Motorola AP-650 Series Thin Access Point. It includes details on package contents, features, hardware installation instructions for wall and ceiling mounts, specifications, regulatory information, and customer support resources. Wall and ceiling mount options are described along with required hardware. Status indicators and technical specifications are listed.
The document provides installation instructions for the Motorola AP-650 Thin Access Point. It can be mounted on a wall or suspended ceiling and is available with integrated or external antennas. The document describes the package contents, features, wall and ceiling mounting procedures, specifications, regulatory information, and support resources. Installation requires attaching the access point to a wall or ceiling using the provided hardware and connecting an Ethernet cable from the access point to a switch with 802.3af power.
The document provides installation instructions for the Motorola AP-650 Thin Access Point. It can be mounted on a wall or suspended ceiling and comes in integrated antenna and external antenna models. The instructions describe the package contents, recommended placement, and step-by-step procedures for wall mounting or mounting on a suspended ceiling T-bar for both antenna models. Specifications and regulatory information are also included.
The document provides information about Spektrum's DX6i 6-channel DSM2 full range radio system for airplanes and helicopters. It discusses the DSM2 Dualink technology which uses 2.4GHz digital spread spectrum modulation for beyond visual range flying. It also mentions ModelMatch technology which prevents operating a model with the wrong memory selected. The document provides instructions for installing batteries, adjusting controls, installing receivers and servos, and performing a range test of the radio system.
Learn about IBM Power 770 and 780 Technical Overview and Introduction.The IBM Power 770 (9117-MMC) and IBM Power 780 servers (9179-MHC) utilize the latest POWER7 processor technology designed to deliver unprecedented performance, scalability, reliability, and manageability for demanding commercial workloads. For more information on Power Systems, visit http://ibm.co/Lx6hfc.
Visit http://bit.ly/KWh5Dx to 'Follow' the official Twitter handle of IBM India Smarter Computing.
Motorola solutions ap6532 access point installation guide (part no. 72 e 1493...Advantec Distribution
The document provides instructions for installing the Motorola AP6532 Access Point. It can be mounted on a wall or suspended ceiling and is available with integrated or external antennas. The wall mount uses two screws and anchors. For ceilings, the integrated model twists onto a T-bar grid and the external model uses additional hardware attached to ceiling tiles. Setup and configuration instructions are also included to complete the installation.
Motorola solutions ap6532 access point installation guide (part no. 72 e 1493...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP6532 Series Access Point. It includes details on package contents, hardware installation, initial setup, specifications, regulatory information, and support resources. The access point can be mounted on a wall or ceiling and receives power over Ethernet, with integrated antennas or external antenna options. Setup involves using an initial wizard to define a basic configuration.
This document is a guide to the differences between AIX 5L Version 5.3 and previous versions. It covers new features in virtualization, including the POWER Hypervisor, micro-partitioning, virtual Ethernet and SCSI devices. It also discusses enhancements to application development in AIX 5L Version 5.3, such as improved POSIX real-time functions, block device mapping, and scalability improvements. The document is intended as a reference for experts migrating to the new version.
This document summarizes the system requirements for Project RIDES, which is being developed by Team Omni at Embry-Riddle Aeronautical University. It details the revision history of the document, provides an overview of the key subsystems and their requirements, and describes use cases and sequence diagrams for core functions like starting a ride, stopping a ride, and updating vehicle locations. The document is intended to specify the intellectual property and technical requirements for the autonomous vehicle project.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
More Related Content
Similar to CC13x2, CC26x2 SimpleLink™ Wireless MCU manual.pdf
This document provides an introduction and overview of NVIDIA's CUDA programming model and API:
- CUDA (Compute Unified Device Architecture) allows developers to use GPUs for general purpose processing beyond graphics. The GPU is treated as a highly multithreaded coprocessor.
- The programming model uses a grid of thread blocks, with threads running SIMD-style on the GPU's multiprocessors. Threads within a block can cooperate via shared memory and synchronize.
- The CUDA API extends C/C++ with keywords to specify kernel functions, memory spaces, and launch configurations. It provides functions for memory management and kernel execution on the GPU.
This user manual provides instructions for operating the Phasor XS portable phased array ultrasonic flaw detector. It describes how to power the device, navigate menus, install and configure probes, perform scans and calibrations, and view and analyze scan results. The manual contains information on keypad functions, display screens, setup parameters, gate settings, and operating the device in various modes like freeze, gain adjustment, and time-corrected gain for phased array non-destructive testing.
This document provides an operation and maintenance manual for the MUX-2200E Integrated Service Multiplexer. The manual contains information on installing and connecting the multiplexer, descriptions of connector pinouts, instructions for management and configuration through the front panel and network ports, and maintenance procedures. It includes chapters on introduction and features, installation, connector pinouts, management, configuration, and maintenance, as well as annexes with CLI commands, control menus, and cable definitions.
Intel добавит в CPU инструкции для глубинного обученияAnatol Alizar
This document provides an overview and reference for Intel's AVX-512 instruction set extensions. It discusses the key features of AVX-512 including 512-bit wide SIMD register and instruction support. It also describes the AVX-512 programming model and application programming interface, covering aspects such as register usage, instruction encoding, exception handling and programming interfaces like CPUID. The document also discusses system programming considerations for AVX-512 including state management using instructions like XSAVE, reset behavior, and exception handling.
TechBook: IMS on z/OS Using EMC Symmetrix Storage SystemsEMC
This document provides guidance on using EMC storage solutions with IMS databases on z/OS, describing IMS components, EMC foundation products like Symmetrix and TimeFinder, advanced storage provisioning techniques, cloning IMS databases, backing up and recovering IMS environments, disaster recovery planning, and performance optimization. It is intended to help database and storage administrators understand how to leverage EMC technologies to enhance the performance, availability, and management of IMS databases on the mainframe.
This document provides instructions for installing and configuring IBM TotalStorage Productivity Center for Replication on AIX systems. It includes information on hardware and software requirements, pre-installation steps, installing required software like DB2, installing TPC for Replication, configuring storage systems and network connectivity, and creating replication sessions between storage systems using TPC for Replication's graphical user interface and command line. The document is intended to help users effectively set up and use TPC for Replication to manage replication services from a single point of control.
This document provides information about installing and using IBM TotalStorage Productivity Center for Replication on AIX systems. It includes details about hardware and software requirements, installation steps, configuration procedures, and usage basics. The document aims to help effectively set up and manage replication services from a single graphical interface.
The BiPAC 7300NX/N RE is a wireless router that provides:
- High-speed wireless access up to 300Mbps and ADSL2+ connectivity for broadband access.
- Dual WAN options - the BiPAC 7300NX includes a USB port to connect a 3G modem for backup internet, while the BiPAC 7300N RE can use its port 1 as a WAN port.
- Integrated firewall, wireless security features, and quality of service controls to prioritize data traffic.
- Easy setup and management through a web-based interface for remote or local administration.
This document provides an operation manual for the SYSMAC CS Series CS1D Duplex System, which includes:
1. CS1D-CPU@@H CPU Units, CS1D-DPL01 Duplex Unit, and CS1D-PA/PD@@@ Power Supply Unit.
2. The system allows for duplex operation to improve reliability through redundant processing and power supply units.
3. The document covers specifications, configuration, installation, wiring, programming, and operation of the CS1D Duplex System components.
Networking for Storage Virtualization and EMC RecoverPoint TechBook EMC
This EMC Engineering TechBook provides a high-level overview of using block storage virtualization solutions, such as EMC VPLEX and Invista, as well as RecoverPoint replication protection. Basic information on interswitch link hops, along with examples showing hop counts in four different fabric configurations, are included.
Motorola ap650 access point installation guide (part no. 72 e 131207-01 rev. d )Advantec Distribution
The document provides instructions for installing the Motorola AP-650 Thin Access Point, which can be mounted on a wall or suspended ceiling. It includes details on package contents, placement guidelines, wall and ceiling mounting procedures, and specifications. The integrated antenna model mounts using wall screws or clips on a suspended ceiling T-bar. The external antenna model also mounts on walls or ceilings and has options for external antenna connections.
Motorola ap650 access point installation guide (part no. 72 e 131207-01 rev. d )Advantec Distribution
The document provides installation instructions for the Motorola AP-650 Series Thin Access Point. It includes details on package contents, features, hardware installation instructions for wall and ceiling mounts, specifications, regulatory information, and customer support resources. Wall and ceiling mount options are described along with required hardware. Status indicators and technical specifications are listed.
The document provides installation instructions for the Motorola AP-650 Thin Access Point. It can be mounted on a wall or suspended ceiling and is available with integrated or external antennas. The document describes the package contents, features, wall and ceiling mounting procedures, specifications, regulatory information, and support resources. Installation requires attaching the access point to a wall or ceiling using the provided hardware and connecting an Ethernet cable from the access point to a switch with 802.3af power.
The document provides installation instructions for the Motorola AP-650 Thin Access Point. It can be mounted on a wall or suspended ceiling and comes in integrated antenna and external antenna models. The instructions describe the package contents, recommended placement, and step-by-step procedures for wall mounting or mounting on a suspended ceiling T-bar for both antenna models. Specifications and regulatory information are also included.
The document provides information about Spektrum's DX6i 6-channel DSM2 full range radio system for airplanes and helicopters. It discusses the DSM2 Dualink technology which uses 2.4GHz digital spread spectrum modulation for beyond visual range flying. It also mentions ModelMatch technology which prevents operating a model with the wrong memory selected. The document provides instructions for installing batteries, adjusting controls, installing receivers and servos, and performing a range test of the radio system.
Learn about IBM Power 770 and 780 Technical Overview and Introduction.The IBM Power 770 (9117-MMC) and IBM Power 780 servers (9179-MHC) utilize the latest POWER7 processor technology designed to deliver unprecedented performance, scalability, reliability, and manageability for demanding commercial workloads. For more information on Power Systems, visit http://ibm.co/Lx6hfc.
Visit http://bit.ly/KWh5Dx to 'Follow' the official Twitter handle of IBM India Smarter Computing.
Motorola solutions ap6532 access point installation guide (part no. 72 e 1493...Advantec Distribution
The document provides instructions for installing the Motorola AP6532 Access Point. It can be mounted on a wall or suspended ceiling and is available with integrated or external antennas. The wall mount uses two screws and anchors. For ceilings, the integrated model twists onto a T-bar grid and the external model uses additional hardware attached to ceiling tiles. Setup and configuration instructions are also included to complete the installation.
Motorola solutions ap6532 access point installation guide (part no. 72 e 1493...Advantec Distribution
This document provides installation instructions for the Motorola Solutions AP6532 Series Access Point. It includes details on package contents, hardware installation, initial setup, specifications, regulatory information, and support resources. The access point can be mounted on a wall or ceiling and receives power over Ethernet, with integrated antennas or external antenna options. Setup involves using an initial wizard to define a basic configuration.
This document is a guide to the differences between AIX 5L Version 5.3 and previous versions. It covers new features in virtualization, including the POWER Hypervisor, micro-partitioning, virtual Ethernet and SCSI devices. It also discusses enhancements to application development in AIX 5L Version 5.3, such as improved POSIX real-time functions, block device mapping, and scalability improvements. The document is intended as a reference for experts migrating to the new version.
This document summarizes the system requirements for Project RIDES, which is being developed by Team Omni at Embry-Riddle Aeronautical University. It details the revision history of the document, provides an overview of the key subsystems and their requirements, and describes use cases and sequence diagrams for core functions like starting a ride, stopping a ride, and updating vehicle locations. The document is intended to specify the intellectual property and technical requirements for the autonomous vehicle project.
Similar to CC13x2, CC26x2 SimpleLink™ Wireless MCU manual.pdf (20)
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODELgerogepatton
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.