3. About
the company
About
the company
Design/ Build
Steel Drums
INTC Steel Drums LLC
The company takes pride in manufacturing drums to the
international standard of the highest quality.
Through constant process improvements, we provide
products which are tough, durable and capable of
withstanding the most punishing usage.
Our steel drums are versatile and can be used for
transporting lubricant oil, hazardous and non-hazardous
chemicals, food additives, pulp, etc.
We are UN Certified,
ISO 2015 :9001, ISO 2015 :14001, OHSAS 2007 :18001
4. Our
Products
Tight Head Unlined, TH (UL)
Full Open Head Unlined, FOH (UL)
Tight Head Epoxy, TH (E)
Full Open Head Epoxy, FOH (E)
Full Open Head Paint FOH (P)
Tight Head Unlined TH (UL)
Full Open Head Unlined FOH (UL)
• Drum Type: Tight Head (Closed Top)
• Body Thickness: 0.6mm – 1.2mm
• End Thickness (Top/Bottom): 0.8mm – 1.5mm
• Capacity : 210 Litre (55 Gallon)
• Inner Coating : None
• Applications : Oils, Lubricants, Chemicals
• Solvents, Polymer Resins etc.
• Drum Type: Open Head (Open Top)
• Body Thickness: 0.8mm – 1.2mm
• End Thickness (Top/Bottom):0.8 mm – 1.2 mm
• Capacity :210 Litre (55 Gallon)
• Inner Coating : None
• Applications: Paints, Grease, Powders etc.
5. Tight Head Epoxy TH (E)
• Drum Type: Tight Head (Closed Top)
• Body Thickness: 0.8mm – 1.2mm
• End Thickness (Top/Bottom):0.8 mm – 1.2 mm
• Capacity :210 Litre (55 Gallon)
• Inner Coating: Epoxy Phenolic Lacquer Lining.
• Applications: Ethanol etc.
Full Open Head Epoxy FOH (E)
• Drum Type: Tight Head (Closed Top)
• Body Thickness: 0.8mm – 1.2mm
• End Thickness (Top/Bottom):0.8 mm – 1.2 mm
• Capacity :210 Litre (55 Gallon)
• Inner Coating: Epoxy Phenolic Lacquer Lining.
• Applications: Food additives, Inks etc.
Full Open Head Unlined FOH (P)
• Drum Type: Full Open Head Paint (Open Top)
• Body Thickness: 0.8mm – 1.2mm
• End Thickness (Top/Bottom):0.8 mm – 1.2 mm
• Capacity :210 Litre (55 Gallon)
• Inner Coating: Stoving Paint
• Applications: Chemicals, Fruit juice, etc.
6. The
Process
Design/ Build
Steel Drums
The Process
INTC uses the most advanced
fully automated steel drum
production line available
existing of:
1 . Hydraulic Up-Coiling Unit
2 . Uncoiling Unit
3 . Side Deviation Rectifying Unit
4 . Sheet Cleaning Machine
5 . 7 roller Servo Sizing & Flattening Machine
6 . Sheet-cutting Machine
7 . Roller Set
8 . Electric Control System
9 . Hydraulic Station
10 . Lift Piler
11 . Sheet Blanking Frame
7. Drum Lids Equipment
1 . Cover Pressing Machine 125T
2 . Double Locking Pressing Machine
3 . Moulds for Barrel Covers
4 . Double Locking Moulds
5 . Pre-Curling & Gluing Machine
6 . Overturn the Lid Machine
7 . Lid Fixing Machine
8 . Lid Searching Machine:
9 . Lid Step Feeding Machine
10 . Closure Step Feeding Machine
11 . Closure Vibrator
Mid-Section Equipment
1 . Auto Feeder
2 . Automatic Seam Welding Machine
3 . Flanger and Beader
4 . Corrugation (“W” Reinforced Rib) Forming Machine
5 . Edge-Curling Machine
6 . Semiautomatic Leak Checking Machine
7 . Cleaning machine for inside
8 . Cleaning machine for outside
9 . Drum Conveyor
10 . Electric Control System
Rear Section Equipment
1 . Paint Spraying Room
2 . 26D Paint Spraying & Drying Line
3 . Trans-Line &Roller Trans-Line after Spraying
4 . Overturn Machine
The
Process
Design / Build
Steel Drums