Gloseals Wheel Chocks for Road Vehicle, Excellent durable products for vehicle stabilization while unloading the materials in the warehouse or for parking.
2. Purpose of Wheel Chocks
• Their main purpose is for vehicle stabilization.
• To be used on vehicles to prevent the chances of
moving on hills or slopes.
• Used frequently on large, truck, lorry and trailer.
• Commonly seen on construction sites, where large
heavy vehicles are being used either for loading or
unloading.
• The wheel chock is used as a security measure in
event of brake failure.
• Mandatory for Work Shops, Service Centers.
3. • Vehicle Stabilizing
• Lorry and Van Parking
• Constructions sites.
• Maintenance work
areas.
• Loading Unloading area.
• Vehicle Docking area
•The Thermoplastic plastic
chock.
• Material of Product:
PPCP (Polypropylene
Copolymer) or equivalent
•It is stronger lighter &
Easy to handle.
•The wheel chock complies
with the DIN 76051
regulation.
4. WHY ‘WC-P’ SERIES WHEEL CHOCK?
• Single Piece Construction, Fully Injection Moulded.
• Durable U.V. stabilized and Chemical resistant
Plastic. Colour or material will not affect in adverse
weather condition.
• Our wheel chock is both tough and lightweight, Easy
to carry.(around 2.500 Kg. Chock only). The Chock
comes with ergonomically Moulded-in handle.
• The Wheel chock also has provision for simply fixing
it to Vehicle body to ensure the chock is always on
board when required.
5. BENEFIT OF PLASTIC WHEEL CHOCK
Why not Metal ?
• Metal Wheel Chock Tends to
rust.
• Metal Wheel Chock can Create
Sparks leading to Fire.
• Metal Wheel Chock is banned
in Oil & Petroleum Industry.
• Metal Wheel Chock is banned
in many Countries.
• Metal Wheel Chock can burst
the tyre of the vehicle
• Metal Wheel Chock Damages
the Ground Surface.
Why not Wooden ?
•Wooden chocks, also banned
in many countries, as it is
Susceptible to fire.
• It can also damage the tyre of
the vehicle.
6. Dimension: 150 mm(Height) x 170mm(width) X 250 mm(length)
Product Weight: 750 gm.(Plastic Body) + 400 gm. Rubber block= 1.150 kg
Gross vehicle weight capacity: 4 Ton
Application: For Small commercial vehicle & Cars.
Colour: Traffic Green
7. Dimension: 230 mm(Height) x 150mm(width) X 320 mm(length)
Product Weight: 1000 gm.(Plastic Body) + 600 gm. Rubber block= 1.600 kg
Gross vehicle weight capacity: 6-8 Ton.
Application: For Light commercial vehicle (LCV) & Bus.
Colour : Traffic Orange
8. Dimension: 230 mm(Height) x 200 mm(width) X 470 mm(length)
Product Weight: 2500 gm.(Plastic Body) + 1000 gm. Rubber block= 3.500 kg
Gross vehicle weight capacity: 20-30 Ton.
Capacity for per Chock: 7- Ton
Application: For MCHV, HCV, Trailer, Truck & Bus.
Colour : Traffic yellow
9. Shop No. 11, Gulmohar Greenways, Mahajanwadi.WEH, Mira
Road, Thane-401107,
Maharashtra, India. | Mail Us: sales@gloseals.com
CONTACT: +91-9832831433, +91-7506366463,+91-9091044070