Case study- Using Recycled Asphalt for Road Rehabilitation, netherlands
•Download as PPTX, PDF•
0 likes•60 views
This case study describes a road rehabilitation project in the Netherlands that used recycled asphalt (RAP) and Neoloy geocells to strengthen the subgrade and reduce maintenance needs. Neoloy geocells were installed below the subbase layer and filled with RAP. This prevented settlements and increased the lifespan of the road. The Neoloy geocells increased the modulus of the RAP, allowing for a stiffer road structure and a 15% reduction in asphalt thickness. This provided an improved and more sustainable road with reduced maintenance costs.
Report
Share
Report
Share
Recommended
Engineered_Flyer
This document discusses soil stabilization and road reclamation services provided by Engineered Soils Inc. The company offers various stabilization techniques including soil modification using fly ash, cement and lime to improve soil properties. They also provide full depth reclamation which involves pulverizing existing pavement and mixing it with stabilizing agents to create a new structural base. Engineered Soils Inc. aims to reduce construction costs by 40-70% compared to traditional road reconstruction while improving the load bearing capacity and drainage of soils and pavement bases.
Israel Shipyard Project
The wharfs at Haifa Port in Israel, a major eastern Mediterranean shipping hub, were suffering from severe cracking and deterioration of working platforms that required frequent maintenance. To reinforce the unstable sand subgrade in a more durable and cost-effective way than conventional concrete, the port installed PRS Neoloy geocells filled with dredged sea sand. This provided a strong yet flexible reinforcement that reduced construction time and costs while increasing the lifespan and load capacity of the wharf surfaces.
02 GeoSpray Fact Sheet ver2
GeoSpray is a high performance fiber reinforced mortar designed for structural rehabilitation through various application techniques like pouring and spraying. It can be used to repair pipes, structures, tunnels, bridges and roads as well as buildings. Some benefits are that it is styrene free, contains no leachable toxins, offers lower costs than alternatives, has high strength, and is sustainable as over 50% of its materials are recycled industrial waste.
IRJET- Study on Stabilization of Soil using Stone Dust
This document presents a study on the use of stone dust to stabilize soil. It discusses how stone dust is a waste material from quarrying that can be used beneficially. Laboratory experiments were conducted to determine the properties of stone dust and its effectiveness as a soil stabilizer. Tests showed that stone dust can increase the bearing capacity and strength of soils. The stone dust improves the stability of the soil and reduces issues like dust and changes in volume due to temperature or moisture. Overall, the study demonstrates that stone dust is a viable, economical option for soil stabilization.
DengXin Cheng & Gary Hicks
Presentation by DengXin Cheng and Gary Hicks of California State University, Chico Pavement Preservation Center on the topic of pavement preservation delivered at the CalAPA Fall Asphalt Pavement Conference Oct. 24, 2013 in Sacramento, Calif.
Chip Seal and Scrub Seal Best Practices May 28, 2014
Presentation delivered at the CalAPA San Diego Technical Committee meeting May 28, 2014 by Kevin Donnelly, Director of Pavement Preservation, Western Emulsions. Topic: Chip Seal and Scrub Seal Best Practices.
Dowel Bar Retrofit: Restore Load Transfer in Concrete Pavement
Dowel Bar Retrofit: Restore Load Transfer in Concrete PavementInternational Grooving & Grinding Association
The document discusses dowel bar retrofit (DBR), a concrete pavement preservation technique that restores load transfer across joints and cracks in concrete roadways. It does this by installing dowel bars linking adjoining concrete slabs. This prevents faults and stepoffs from forming at joints and cracks, eliminating the rough ride felt when load is not properly transferred. When used with diamond grinding, DBR can return concrete roads to a smooth condition exceeding their original construction quality. The document provides details on how DBR works, its benefits like long lifespan and cost-effectiveness, and considerations for whether a road is a good candidate for the process.IRJET- A Review Effect of Size of Aggregate on M40 Concrete by Partial Replac...
This document summarizes a study that investigated the effect of replacing cement with sugarcane bagasse ash at various percentages in an M40 concrete mix. Two aggregate proportions were tested: 60% 20mm and 40% 10mm aggregates (Case I), and 40% 20mm and 60% 10mm aggregates (Case II). Workability and compressive strength at 7 and 14 days were evaluated. The results showed that replacing cement with up to 15% sugarcane bagasse ash improved compressive strength and provided an eco-friendly and lower cost concrete mix.
Recommended
Engineered_Flyer
This document discusses soil stabilization and road reclamation services provided by Engineered Soils Inc. The company offers various stabilization techniques including soil modification using fly ash, cement and lime to improve soil properties. They also provide full depth reclamation which involves pulverizing existing pavement and mixing it with stabilizing agents to create a new structural base. Engineered Soils Inc. aims to reduce construction costs by 40-70% compared to traditional road reconstruction while improving the load bearing capacity and drainage of soils and pavement bases.
Israel Shipyard Project
The wharfs at Haifa Port in Israel, a major eastern Mediterranean shipping hub, were suffering from severe cracking and deterioration of working platforms that required frequent maintenance. To reinforce the unstable sand subgrade in a more durable and cost-effective way than conventional concrete, the port installed PRS Neoloy geocells filled with dredged sea sand. This provided a strong yet flexible reinforcement that reduced construction time and costs while increasing the lifespan and load capacity of the wharf surfaces.
02 GeoSpray Fact Sheet ver2
GeoSpray is a high performance fiber reinforced mortar designed for structural rehabilitation through various application techniques like pouring and spraying. It can be used to repair pipes, structures, tunnels, bridges and roads as well as buildings. Some benefits are that it is styrene free, contains no leachable toxins, offers lower costs than alternatives, has high strength, and is sustainable as over 50% of its materials are recycled industrial waste.
IRJET- Study on Stabilization of Soil using Stone Dust
This document presents a study on the use of stone dust to stabilize soil. It discusses how stone dust is a waste material from quarrying that can be used beneficially. Laboratory experiments were conducted to determine the properties of stone dust and its effectiveness as a soil stabilizer. Tests showed that stone dust can increase the bearing capacity and strength of soils. The stone dust improves the stability of the soil and reduces issues like dust and changes in volume due to temperature or moisture. Overall, the study demonstrates that stone dust is a viable, economical option for soil stabilization.
DengXin Cheng & Gary Hicks
Presentation by DengXin Cheng and Gary Hicks of California State University, Chico Pavement Preservation Center on the topic of pavement preservation delivered at the CalAPA Fall Asphalt Pavement Conference Oct. 24, 2013 in Sacramento, Calif.
Chip Seal and Scrub Seal Best Practices May 28, 2014
Presentation delivered at the CalAPA San Diego Technical Committee meeting May 28, 2014 by Kevin Donnelly, Director of Pavement Preservation, Western Emulsions. Topic: Chip Seal and Scrub Seal Best Practices.
Dowel Bar Retrofit: Restore Load Transfer in Concrete Pavement
Dowel Bar Retrofit: Restore Load Transfer in Concrete PavementInternational Grooving & Grinding Association
The document discusses dowel bar retrofit (DBR), a concrete pavement preservation technique that restores load transfer across joints and cracks in concrete roadways. It does this by installing dowel bars linking adjoining concrete slabs. This prevents faults and stepoffs from forming at joints and cracks, eliminating the rough ride felt when load is not properly transferred. When used with diamond grinding, DBR can return concrete roads to a smooth condition exceeding their original construction quality. The document provides details on how DBR works, its benefits like long lifespan and cost-effectiveness, and considerations for whether a road is a good candidate for the process.IRJET- A Review Effect of Size of Aggregate on M40 Concrete by Partial Replac...
This document summarizes a study that investigated the effect of replacing cement with sugarcane bagasse ash at various percentages in an M40 concrete mix. Two aggregate proportions were tested: 60% 20mm and 40% 10mm aggregates (Case I), and 40% 20mm and 60% 10mm aggregates (Case II). Workability and compressive strength at 7 and 14 days were evaluated. The results showed that replacing cement with up to 15% sugarcane bagasse ash improved compressive strength and provided an eco-friendly and lower cost concrete mix.
Cypher Environmental
Cypher Environmental is a Canadian company that provides environmentally friendly and cost-effective dust control and soil stabilization solutions around the world. Their main products are Dust Stop liquid concentrate, which is effective at eliminating dust from unpaved roads and tailings piles, and EarthZyme soil stabilizer, which reduces maintenance needs for clay-based roads by increasing compaction and strength over time. Both products improve safety, reduce health issues from airborne dust, and lower operational costs through less frequent grading and watering or use of cheaper local soils.
PMM
This document provides information about Pavement Products, a company that manufactures and distributes pavement sealers and other pavement maintenance products across Canada. The company is headquartered in Brantford, Ontario and has additional offices across Canada. It offers a variety of products including pavement sealers, road sealants, crack fillers, pothole repair, traffic markings, and sport surfacing products. One of its key products is Polymer-Modified MasterSeal, a high-performance pavement sealer blended with polymers and surfactants that provides superior adhesion, flexibility, durability and faster drying compared to conventional sealers.
Performance And Evaluation Of Rubber As Concrete Material
This document summarizes research on using waste tire rubber as a partial replacement for aggregates in concrete. The key points are:
1. Waste tires pose a major environmental challenge as they are not easily disposed of through landfilling or burning. Using tire rubber in concrete provides an outlet for waste tires while utilizing their properties.
2. Studies have shown that rubberized concrete has lower compressive strength but increased toughness, ductility, and resistance to impacts compared to normal concrete.
3. The document reviews previous research showing that replacing up to 17% of aggregates with crumb rubber by volume can produce concrete suitable for some structural applications, especially when using magnesium oxychloride cement instead of Portland cement.
IRJET- Influence of CRMB in SMA by using Coir Fibre – An Experimental Analysis
This document discusses a study on using crumb rubber modified bitumen (CRMB) in stone mastic asphalt (SMA) with the addition of coir fiber. Marshall mix design tests were conducted on SMA mixtures containing different percentages of CRMB and coir fiber. The results showed that mixtures with 7% bitumen content and 0.5% coir fiber exhibited the highest stability. Using CRMB and coir fiber improved the mechanical properties of the SMA mixtures compared to conventional mixtures. The document concludes that CRMB-SMA mixtures show potential for better performance in pavement applications.
IRJET- Soil Stabilization by using Waste Material - Brick Dust
This document discusses using brick dust to stabilize black cotton soil for construction purposes. Black cotton soil is problematic for construction due to its high shrink-swell potential and low strength. The authors investigate using brick dust as an additive to improve the engineering properties of black cotton soil. They describe the properties of the untreated black cotton soil and brick dust. Laboratory tests are conducted to determine if brick dust improves the strength and reduces the volume change of black cotton soil. The results indicate whether brick dust is effective at stabilizing black cotton soil for construction applications.
IRJET - Effects of Partial Replacement of Portland Cement and Fine Aggregate ...
This document reviews research on the effects of partially replacing Portland cement and fine aggregate in concrete with bagasse ash, rice husk ash, and waste foundry sand. It summarizes several studies that investigated how these replacements impact the mechanical properties of concrete, including compressive strength, flexural strength, and tensile strength. The studies found that partial replacements of cement with these materials, typically up to 30%, can improve properties like strength and durability while reducing costs and environmental impacts. However, the properties achieved depend on factors like the materials' compositions and particle sizes. Overall, the partial replacements show potential but require optimization of materials and proportions.
IRJET- Review on Improvement in Strength of Soil by Adding Waste Fly-Ash and ...
This document summarizes research on improving the strength of soil by adding waste fly ash and polypropylene fiber. It discusses how fly ash and polypropylene fiber can be used to stabilize soil and increase its strength properties. A literature review covers previous studies that found additions of 1% fiber and 20% cement optimized strength. Tests on soil-fly ash mixtures found strength increased with fiber content up to 1% and fiber length of 12mm performed best. The document concludes that using these waste materials for soil stabilization can improve strength while providing an environmentally-friendly use of industrial waste.
IRJET- Strengthening of Permeable Concrete
This document discusses permeable concrete and its use in pavement applications. It begins by explaining that traditional impermeable pavements prevent groundwater recharge from precipitation. Permeable concrete is an effective solution as its porous structure allows rainwater to infiltrate into the soil. The document then provides an overview of permeable concrete mix design and properties. It describes how permeable concrete can be used in areas with light traffic like parking lots and pathways. While permeable concrete has environmental benefits, its implementation presents issues like higher costs and lack of performance data. In conclusion, permeable pavements can effectively manage stormwater and recharge groundwater if these challenges are addressed.
Architect presentation of EGS
The EnviroGreen synthetic turf system consists of a sub-base layer, recycled foam drainage and shock absorbing layer, and monofilament or slit tape turf systems with alternative infill choices. The sub-base layer provides stability and controls planarity and pitch, while the drainage layer provides drainage and shock absorption using recycled polyethylene foam. Turf options use slit tape or monofilament yarns with either sand and SBR or sand and thermoplastic elastomer (TPE) infill. TPE infill reduces temperatures and has less environmental impact than other infills. The system has environmental, performance, and cost benefits over conventional synthetic turf systems.
Georgia DOT Drivable Grass 3 27-14
Drivable Grass presentation for the New Product Evaluation Committee for the Georgia Department of Transportation.
IRJET- Experimental Study on the Properties of Concrete with Partial Repl...
The document presents an experimental study on the properties of concrete with partial replacement of fine aggregates with waste tire crumb rubber. Cubes and cylinders of M20 grade concrete were cast with fine aggregate replacement of 4%, 8%, 12%, 16%, and 20% by volume with crumb rubber. The specimens were tested for compressive strength, split tensile strength, and slump at 7, 14, and 28 days. The study aims to determine the optimal level of crumb rubber replacement to maximize strength properties and compare results to a control M20 concrete mix without replacement. The properties of materials used like cement, aggregates, and crumb rubber are detailed. The mix design and methodology of casting and curing specimens is also provided.
Building Highways on Sand – St. Petersburg, Russia
In this short version of the case study, you can see how Neoloy® Geocells double the lifespan of highway using locally available sandy soil.
Sand Access Road for mining - South Africa
High-quality deposits of zircon and other rare materials can be found in the sands of Tormin beach. However, extracting them presented a world-class challenge, as the Mineral Commodities heavy equipment necessary must traverse especially soft sand, with extremely poor bearing capacity.
Check some insights in this short version of the case study
PRS Geocell Solution
What are Geocells, different types of Geocells, and how to Choose the Right Geocell Solution for your project.
Polymer road technology
Polymer road technology is about innovations in road construction leading to technological development of nation. It's an innovative platform which combines Civil and Polymer engineering for better economic outcomes.
Highway 6 - Israel
The Cross Israel Highway needed to add a third lane in each direction to accommodate increased traffic. Using a conventional approach of asphalt and stone layers would be expensive. AECON tested using Neoloy Geocells to reinforce the base layer, allowing for lower quality granular infill and a 23% reduction in asphalt. This resulted in both construction cost savings and higher load capacity compared to conventional methods.
porous and previous roads
Green technologies like pervious concrete and porous asphalt are being increasingly used in road construction in India. Pervious concrete allows water to pass through, reducing runoff. It consists of cement, coarse aggregates, and admixtures with high porosity (16% void space). Porous asphalt also has high porosity and consists of layers of asphalt, crushed aggregates, and geotextile. Both technologies reduce stormwater runoff and promote groundwater recharge compared to conventional pavements. They also provide environmental, economic, and safety benefits.
open graded friction course (OGFC)
OGFC (open-graded friction course) is a pavement surface mixture composed of open gradation and little fine aggregate. It contains a minimum of 18% air voids to provide high skid resistance and drainage. OGFC is used on high traffic roads and areas prone to wet weather accidents to reduce hydroplaning. Its open structure allows water to drain through the pavement to reduce splash and spray. However, OGFC may be more prone to clogging, raveling, and winter maintenance issues compared to dense-graded asphalt.
MEG Energy - Canada
An oil sands mining company in Canada needed to build an access road over saturated, organic soil with very low bearing capacity. Conventional solutions like soil replacement were not feasible due to the deep peat bog and environmental/cost issues. The company used Neoloy geocells filled with local sand to provide a stable base that distributed loads widely and reduced stress and settlement on the soft soil. The geocell road solution was constructed in six weeks and could withstand heavy traffic and weather conditions, providing an engineered and environmentally-friendly option.
Noise reduction in pavement made of rubberized bituminious top layer ppt
The document discusses noise reduction in pavement made of rubberized bituminous top layers. It provides an introduction to asphalt rubber pavement and its use of recycled tire rubber. The history of asphalt rubber is described along with different classifications of rubberized asphalt mixes. Preliminary mix designs, advantages like noise reduction and durability, and disadvantages involving costs are outlined. Stone matrix asphalt is discussed as a gap-graded mix using aggregates, binder, fillers and additives to reduce drain-down. The document concludes that rubberized asphalt mixtures provide more durable pavements with noise reduction benefits.
Turkey - Retaining Wall case study
The complex needed a retaining wall to create a road and parking area on a 15m unstable slope. Conventional concrete walls would be too expensive and prone to cracking, while segmental walls would be complicated. The solution was a unique design using PRS-Neoloy geocells, with 3 terraced walls up to 15m high on the 75 degree slope. The geocell walls provided global stability, flexibility to withstand earth movements per seismic codes, and a long lifespan, at a lower cost than traditional options.
Energy Brochure
The document describes PRS Neoweb technology for stabilizing energy production sites. Neoweb is a 3D cellular soil confinement system that stabilizes soil, protects infrastructure from environmental hazards, and reinforces soil to reduce construction costs and timelines. It has been used successfully on numerous oil and gas pipeline and infrastructure projects. Neoweb provides long-term stabilization even in challenging soil conditions like permafrost, and reduces construction impacts on the environment.
More Related Content
What's hot
Cypher Environmental
Cypher Environmental is a Canadian company that provides environmentally friendly and cost-effective dust control and soil stabilization solutions around the world. Their main products are Dust Stop liquid concentrate, which is effective at eliminating dust from unpaved roads and tailings piles, and EarthZyme soil stabilizer, which reduces maintenance needs for clay-based roads by increasing compaction and strength over time. Both products improve safety, reduce health issues from airborne dust, and lower operational costs through less frequent grading and watering or use of cheaper local soils.
PMM
This document provides information about Pavement Products, a company that manufactures and distributes pavement sealers and other pavement maintenance products across Canada. The company is headquartered in Brantford, Ontario and has additional offices across Canada. It offers a variety of products including pavement sealers, road sealants, crack fillers, pothole repair, traffic markings, and sport surfacing products. One of its key products is Polymer-Modified MasterSeal, a high-performance pavement sealer blended with polymers and surfactants that provides superior adhesion, flexibility, durability and faster drying compared to conventional sealers.
Performance And Evaluation Of Rubber As Concrete Material
This document summarizes research on using waste tire rubber as a partial replacement for aggregates in concrete. The key points are:
1. Waste tires pose a major environmental challenge as they are not easily disposed of through landfilling or burning. Using tire rubber in concrete provides an outlet for waste tires while utilizing their properties.
2. Studies have shown that rubberized concrete has lower compressive strength but increased toughness, ductility, and resistance to impacts compared to normal concrete.
3. The document reviews previous research showing that replacing up to 17% of aggregates with crumb rubber by volume can produce concrete suitable for some structural applications, especially when using magnesium oxychloride cement instead of Portland cement.
IRJET- Influence of CRMB in SMA by using Coir Fibre – An Experimental Analysis
This document discusses a study on using crumb rubber modified bitumen (CRMB) in stone mastic asphalt (SMA) with the addition of coir fiber. Marshall mix design tests were conducted on SMA mixtures containing different percentages of CRMB and coir fiber. The results showed that mixtures with 7% bitumen content and 0.5% coir fiber exhibited the highest stability. Using CRMB and coir fiber improved the mechanical properties of the SMA mixtures compared to conventional mixtures. The document concludes that CRMB-SMA mixtures show potential for better performance in pavement applications.
IRJET- Soil Stabilization by using Waste Material - Brick Dust
This document discusses using brick dust to stabilize black cotton soil for construction purposes. Black cotton soil is problematic for construction due to its high shrink-swell potential and low strength. The authors investigate using brick dust as an additive to improve the engineering properties of black cotton soil. They describe the properties of the untreated black cotton soil and brick dust. Laboratory tests are conducted to determine if brick dust improves the strength and reduces the volume change of black cotton soil. The results indicate whether brick dust is effective at stabilizing black cotton soil for construction applications.
IRJET - Effects of Partial Replacement of Portland Cement and Fine Aggregate ...
This document reviews research on the effects of partially replacing Portland cement and fine aggregate in concrete with bagasse ash, rice husk ash, and waste foundry sand. It summarizes several studies that investigated how these replacements impact the mechanical properties of concrete, including compressive strength, flexural strength, and tensile strength. The studies found that partial replacements of cement with these materials, typically up to 30%, can improve properties like strength and durability while reducing costs and environmental impacts. However, the properties achieved depend on factors like the materials' compositions and particle sizes. Overall, the partial replacements show potential but require optimization of materials and proportions.
IRJET- Review on Improvement in Strength of Soil by Adding Waste Fly-Ash and ...
This document summarizes research on improving the strength of soil by adding waste fly ash and polypropylene fiber. It discusses how fly ash and polypropylene fiber can be used to stabilize soil and increase its strength properties. A literature review covers previous studies that found additions of 1% fiber and 20% cement optimized strength. Tests on soil-fly ash mixtures found strength increased with fiber content up to 1% and fiber length of 12mm performed best. The document concludes that using these waste materials for soil stabilization can improve strength while providing an environmentally-friendly use of industrial waste.
IRJET- Strengthening of Permeable Concrete
This document discusses permeable concrete and its use in pavement applications. It begins by explaining that traditional impermeable pavements prevent groundwater recharge from precipitation. Permeable concrete is an effective solution as its porous structure allows rainwater to infiltrate into the soil. The document then provides an overview of permeable concrete mix design and properties. It describes how permeable concrete can be used in areas with light traffic like parking lots and pathways. While permeable concrete has environmental benefits, its implementation presents issues like higher costs and lack of performance data. In conclusion, permeable pavements can effectively manage stormwater and recharge groundwater if these challenges are addressed.
Architect presentation of EGS
The EnviroGreen synthetic turf system consists of a sub-base layer, recycled foam drainage and shock absorbing layer, and monofilament or slit tape turf systems with alternative infill choices. The sub-base layer provides stability and controls planarity and pitch, while the drainage layer provides drainage and shock absorption using recycled polyethylene foam. Turf options use slit tape or monofilament yarns with either sand and SBR or sand and thermoplastic elastomer (TPE) infill. TPE infill reduces temperatures and has less environmental impact than other infills. The system has environmental, performance, and cost benefits over conventional synthetic turf systems.
Georgia DOT Drivable Grass 3 27-14
Drivable Grass presentation for the New Product Evaluation Committee for the Georgia Department of Transportation.
IRJET- Experimental Study on the Properties of Concrete with Partial Repl...
The document presents an experimental study on the properties of concrete with partial replacement of fine aggregates with waste tire crumb rubber. Cubes and cylinders of M20 grade concrete were cast with fine aggregate replacement of 4%, 8%, 12%, 16%, and 20% by volume with crumb rubber. The specimens were tested for compressive strength, split tensile strength, and slump at 7, 14, and 28 days. The study aims to determine the optimal level of crumb rubber replacement to maximize strength properties and compare results to a control M20 concrete mix without replacement. The properties of materials used like cement, aggregates, and crumb rubber are detailed. The mix design and methodology of casting and curing specimens is also provided.
What's hot (11)
Performance And Evaluation Of Rubber As Concrete Material
Performance And Evaluation Of Rubber As Concrete Material
IRJET- Influence of CRMB in SMA by using Coir Fibre – An Experimental Analysis
IRJET- Influence of CRMB in SMA by using Coir Fibre – An Experimental Analysis
IRJET- Soil Stabilization by using Waste Material - Brick Dust
IRJET- Soil Stabilization by using Waste Material - Brick Dust
IRJET - Effects of Partial Replacement of Portland Cement and Fine Aggregate ...
IRJET - Effects of Partial Replacement of Portland Cement and Fine Aggregate ...
IRJET- Review on Improvement in Strength of Soil by Adding Waste Fly-Ash and ...
IRJET- Review on Improvement in Strength of Soil by Adding Waste Fly-Ash and ...
IRJET- Experimental Study on the Properties of Concrete with Partial Repl...
IRJET- Experimental Study on the Properties of Concrete with Partial Repl...
Similar to Case study- Using Recycled Asphalt for Road Rehabilitation, netherlands
Building Highways on Sand – St. Petersburg, Russia
In this short version of the case study, you can see how Neoloy® Geocells double the lifespan of highway using locally available sandy soil.
Sand Access Road for mining - South Africa
High-quality deposits of zircon and other rare materials can be found in the sands of Tormin beach. However, extracting them presented a world-class challenge, as the Mineral Commodities heavy equipment necessary must traverse especially soft sand, with extremely poor bearing capacity.
Check some insights in this short version of the case study
PRS Geocell Solution
What are Geocells, different types of Geocells, and how to Choose the Right Geocell Solution for your project.
Polymer road technology
Polymer road technology is about innovations in road construction leading to technological development of nation. It's an innovative platform which combines Civil and Polymer engineering for better economic outcomes.
Highway 6 - Israel
The Cross Israel Highway needed to add a third lane in each direction to accommodate increased traffic. Using a conventional approach of asphalt and stone layers would be expensive. AECON tested using Neoloy Geocells to reinforce the base layer, allowing for lower quality granular infill and a 23% reduction in asphalt. This resulted in both construction cost savings and higher load capacity compared to conventional methods.
porous and previous roads
Green technologies like pervious concrete and porous asphalt are being increasingly used in road construction in India. Pervious concrete allows water to pass through, reducing runoff. It consists of cement, coarse aggregates, and admixtures with high porosity (16% void space). Porous asphalt also has high porosity and consists of layers of asphalt, crushed aggregates, and geotextile. Both technologies reduce stormwater runoff and promote groundwater recharge compared to conventional pavements. They also provide environmental, economic, and safety benefits.
open graded friction course (OGFC)
OGFC (open-graded friction course) is a pavement surface mixture composed of open gradation and little fine aggregate. It contains a minimum of 18% air voids to provide high skid resistance and drainage. OGFC is used on high traffic roads and areas prone to wet weather accidents to reduce hydroplaning. Its open structure allows water to drain through the pavement to reduce splash and spray. However, OGFC may be more prone to clogging, raveling, and winter maintenance issues compared to dense-graded asphalt.
MEG Energy - Canada
An oil sands mining company in Canada needed to build an access road over saturated, organic soil with very low bearing capacity. Conventional solutions like soil replacement were not feasible due to the deep peat bog and environmental/cost issues. The company used Neoloy geocells filled with local sand to provide a stable base that distributed loads widely and reduced stress and settlement on the soft soil. The geocell road solution was constructed in six weeks and could withstand heavy traffic and weather conditions, providing an engineered and environmentally-friendly option.
Noise reduction in pavement made of rubberized bituminious top layer ppt
The document discusses noise reduction in pavement made of rubberized bituminous top layers. It provides an introduction to asphalt rubber pavement and its use of recycled tire rubber. The history of asphalt rubber is described along with different classifications of rubberized asphalt mixes. Preliminary mix designs, advantages like noise reduction and durability, and disadvantages involving costs are outlined. Stone matrix asphalt is discussed as a gap-graded mix using aggregates, binder, fillers and additives to reduce drain-down. The document concludes that rubberized asphalt mixtures provide more durable pavements with noise reduction benefits.
Turkey - Retaining Wall case study
The complex needed a retaining wall to create a road and parking area on a 15m unstable slope. Conventional concrete walls would be too expensive and prone to cracking, while segmental walls would be complicated. The solution was a unique design using PRS-Neoloy geocells, with 3 terraced walls up to 15m high on the 75 degree slope. The geocell walls provided global stability, flexibility to withstand earth movements per seismic codes, and a long lifespan, at a lower cost than traditional options.
Energy Brochure
The document describes PRS Neoweb technology for stabilizing energy production sites. Neoweb is a 3D cellular soil confinement system that stabilizes soil, protects infrastructure from environmental hazards, and reinforces soil to reduce construction costs and timelines. It has been used successfully on numerous oil and gas pipeline and infrastructure projects. Neoweb provides long-term stabilization even in challenging soil conditions like permafrost, and reduces construction impacts on the environment.
Energy Brochure
Neoweb technology stabilizes energy production sites by reinforcing soil. It reduces fill requirements by up to 50% while cutting project schedules in half. Neoweb provides long-term stabilization, protecting pipelines, roads, and facilities even in challenging soil and climate conditions. Its high load-bearing capacity and resistance to chemicals and petroleum make it a durable solution for stabilizing access roads, platforms, and the ground around pipelines and facilities.
Energy Brochure
The document describes PRS Neoweb technology for stabilizing energy production sites. Neoweb is a 3D soil confinement system that stabilizes soil to reinforce pipelines, access roads, and facilities. It reduces fill needs by 50% and cuts project timelines in half. Neoweb is durable in extreme conditions, impervious to chemicals and temperatures, and provides long-term soil reinforcement for sustainable infrastructure.
Energy Brochure
Neoweb technology stabilizes energy production sites by reinforcing soil. It reduces fill requirements by up to 50% while cutting project schedules in half. Neoweb provides long-term stabilization, protecting pipelines, roads, and facilities even in challenging soil and climate conditions. Its high load-bearing capacity and resistance to chemicals suits it for stabilizing access roads, rail lines, and platforms used in the oil, gas and energy industries.
Energy Brochure
The document describes PRS Neoweb technology for stabilizing energy production sites. Neoweb is a 3D cellular soil confinement system that stabilizes soil, protects infrastructure from environmental hazards, and reinforces soil to reduce construction costs and timelines. It has been used successfully on numerous oil and gas pipeline and infrastructure projects across remote and challenging terrain. Neoweb provides long-term stabilization and protection of pipelines, roads, and facilities to support efficient and sustainable energy production.
Polysoil D150 e publication march 2011
The document discusses Polysoil D150, a revolutionary new product for road construction. Polysoil D150 is a co-polymer binding agent that can be directly applied to existing soil to create a durable and flexible road base, without the need for aggregates. This allows for faster, cheaper, and more environmentally friendly road construction compared to traditional methods.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
materials of roads.pptx
This document discusses methods for waterproofing roads to increase their lifespan. It describes materials commonly used for waterproofing cement concrete roads and bituminous roads, including calcium stearate, petroleum wax emulsions, rubber crumbs, and paving fabrics. The document explains how these materials are added or applied to roads to fill cracks and prevent water infiltration that can cause potholes over freeze-thaw cycles. Waterproofing roads in these ways helps strengthen their structure, reduce repairs, and lower lifecycle costs while improving safety.
QWIK GUIDE: GeoFoam 0218
Dyplast has over fifty years of development and manufacturing experience with its GeoFoam product line and applications. Dyplast GeoFoam is produced as a large expanded polystyrene (EPS) rigid foam block, typically used as a light-weight/high-strength structural replacement for soil in geo-technical projects or as structural alternatives in applications such as stadium seating and swimming pool foundations in hi-rise hotels. Just a few examples include:
QWIK GUIDE: GeoFoam 0218
Dyplast has over 50 years of experience manufacturing expanded polystyrene (EPS) geofoam blocks under the brand name Dyplast GeoFoam. Dyplast GeoFoam is a lightweight, high-strength structural material that can be used as a replacement for soil in applications such as road bases, embankments, stadium seating, and swimming pool foundations. It is resistant to moisture, rot, mold, erosion, and settling when properly installed. Dyplast GeoFoam also has excellent insulating properties and strength to complement natural soils. It is tested to meet industry standards and available in a range of densities and large block sizes to optimize engineering and construction processes. Dyplast has high production capacity and inventory
Similar to Case study- Using Recycled Asphalt for Road Rehabilitation, netherlands (20)
Building Highways on Sand – St. Petersburg, Russia
Building Highways on Sand – St. Petersburg, Russia
Noise reduction in pavement made of rubberized bituminious top layer ppt
Noise reduction in pavement made of rubberized bituminious top layer ppt
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Recently uploaded
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
An improved modulation technique suitable for a three level flying capacitor ...
This research paper introduces an innovative modulation technique for controlling a 3-level flying capacitor multilevel inverter (FCMLI), aiming to streamline the modulation process in contrast to conventional methods. The proposed
simplified modulation technique paves the way for more straightforward and
efficient control of multilevel inverters, enabling their widespread adoption and
integration into modern power electronic systems. Through the amalgamation of
sinusoidal pulse width modulation (SPWM) with a high-frequency square wave
pulse, this controlling technique attains energy equilibrium across the coupling
capacitor. The modulation scheme incorporates a simplified switching pattern
and a decreased count of voltage references, thereby simplifying the control
algorithm.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Recently uploaded (20)
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
An improved modulation technique suitable for a three level flying capacitor ...
An improved modulation technique suitable for a three level flying capacitor ...
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Case study- Using Recycled Asphalt for Road Rehabilitation, netherlands
- 1. Case Study Using Recycled Asphalt (RAP) for Road Rehabilitation Netherlands
- 2. The Challenge • Rehabilitate a rural road over soft clay and peat soils • Maintenance was frequent due to insufficient subgrade strength • How to reduce asphalt thickness while improving lifespan?
- 3. The Neoloy Solution • Neoloy were installed in the subbase layer and infilled with onsite reclaimed asphalt • Mattress effect prevents settlements and increase lifespan • The Neoloy increases the modulus of RAP, enabling a stiffer structure and reducing the asphalt layer
- 4. Sustainable Solution Utilizing recycled pavement The Neoloy Advantage 15 % Saving in Asphalt Thickness Improved road quality, performance & lifespan Reduced Maintenance Costs
- 5. Tough Cell - Neoloy® Technology Neoloy® – Nano composite polymer alloy 10x more durable than other geocells Environmental Durability HPOIT Elastic Stiffness DMA Tensile Strength TENSILE Resistance to Permanent Deformation SIM Neoloy High-performance parameters verified by standard tests. Qualified engineering methods and tools
- 6. Want to know more? Comment or drop me a message
Editor's Notes
- The concrete paving blocks, which formed the old base layer, were crushed into small size granular material for subbase infill. The milled asphalt was crushed to gravel size and used as infill for the Neoloy Geocells in the base layer. The pavement design included a biaxial geogrid on the subgrade. The hybrid solution produces a composite reinforcement factor greater than the combination of the two
- The concrete paving blocks, which formed the old base layer, were crushed into small size granular material for subbase infill. The milled asphalt was crushed to gravel size and used as infill for the Neoloy Geocells in the base layer. The pavement design included a biaxial geogrid on the subgrade. The hybrid solution produces a composite reinforcement factor greater than the combination of the two