Only qualified & competent personnel shall be permitted to work with electrical equipment only if they labelled with designated color coding for the respective month.
Competent personnel must be trained to recognize and avoid hazards with respect to equipment or work methods and must be familiar with applicable codes and standards.
All wiring shall have appropriate internal and external grounding.
Never bridge fuses and use appropriate rating of fuses for replacement.
De-energize all lines on which work will be performed, apply padlocks and lockout tags procedure, and this should be performed as per the Permit to Work System.
All temporary power supplies, used to provide power for electrical hand tools, must incorporate RCD’s (residual Current Devices) or ELCBs (Earth Leakage Circuit Breakers) that will trip at a leakage of 30 MA.
Trip test to be conducted weekly and recorded.
The use of 110v electrical equipment and hand tools on site is recommended, whenever possible.
All metal conductive parts within an arm reach from electrical power source shall be properly grounded to facilitate the operation of protection device in case of failure.
Live parts of electrical equipment operating at 50 volts or more must be guarded against accidental contact at all times.
Exposed non-current carrying metal parts of cord-and-plug-connected equipment that may become energized must be grounded.
Safe Usage Of PPE Toolbox Talk TBT 006.pdfGlobal EHS
Toolbox Talk - Safe Usage Of PPE
PPE is last line of defence which means there is nothing between you and your PPE that will protect you from a Hazard.
Below are the ways in which PPE fails to Protect us are;
1. Wrong PPE:
Wearing only Light Eye Protection while grinding.
Use of PVC gloves when there is need of rubber gloves.
Using dust mask when vapor mask required.
2. Damaged of modified PPE:
Drilling holes in ear protection.
Removing vents from goggles.
Torn acid suit.
3. Not wearing specified PPE:
Not wearing goggles while drilling.
Not wearing gloves while lifting.
Not wearing ear defenders whilst grinding.
4. Wearing PPE incorrectly:
Safety helmet on backwards.
Overalls tied around waist.
Earplugs no inserted into ear canal.
5. Wearing contaminated PPE:
Tipping contamination on goggles into own eyes when removing.
Removing acid suit without decontaminating.
Using PPE not issued to you.
To counter these failures PPE should only be used if the individual is competent in its use. The individual has inspected the PPE. The individual has been made aware of the correct method of putting on and removing PPE.
Always do assessments to ensure you have the correct PPE for the job.
Personal protection is the last line of defence. It is personal to you.
If you abuse it, fail to use it or are given the wrong type it is only you who will be injured.
Follow below to avoid failure of PPE usage:
• In case of Doubt, ask for the same.
• Get PPE issued from authorised.
• Check it every-time before use.
• Wear it every-time.
• And last but not the least, if you take of your PPE then PPE will take care of you.
Ensure Safe Usage Of PPE to protect yourself from a Hazard.
Visit us to get full articles and more topics on Environment, Health, Fire And Safety at https://globalehs.co.in, you can also join us on social media to get instant update by subscribe/Join with the help of link given in the web site or by visiting below links.
Website: https://globalehs.co.in
LinkedIn: https://www.linkedin.com/company/globalehs
YouTube: https://youtube.com/channel/UCeUtB5v5Xv209bOE7cs16uw?sub_confirmation=1
Facebook: https://www.facebook.com/groups/5113594842063456
WhatsApp Group: https://chat.whatsapp.com/GMyJtKoq3Rf09cqB6WgvtI
Telegram Channel: https://t.me/globalehs
Twitter: https://twitter.com/Global_EHS1
Medium: https://medium.com/@connect.globalehs
Pinterest: https://in.pinterest.com/connectglobalehs/global-ehs/
Only qualified & competent personnel shall be permitted to work with electrical equipment only if they labelled with designated color coding for the respective month.
Competent personnel must be trained to recognize and avoid hazards with respect to equipment or work methods and must be familiar with applicable codes and standards.
All wiring shall have appropriate internal and external grounding.
Never bridge fuses and use appropriate rating of fuses for replacement.
De-energize all lines on which work will be performed, apply padlocks and lockout tags procedure, and this should be performed as per the Permit to Work System.
All temporary power supplies, used to provide power for electrical hand tools, must incorporate RCD’s (residual Current Devices) or ELCBs (Earth Leakage Circuit Breakers) that will trip at a leakage of 30 MA.
Trip test to be conducted weekly and recorded.
The use of 110v electrical equipment and hand tools on site is recommended, whenever possible.
All metal conductive parts within an arm reach from electrical power source shall be properly grounded to facilitate the operation of protection device in case of failure.
Live parts of electrical equipment operating at 50 volts or more must be guarded against accidental contact at all times.
Exposed non-current carrying metal parts of cord-and-plug-connected equipment that may become energized must be grounded.
Safe Usage Of PPE Toolbox Talk TBT 006.pdfGlobal EHS
Toolbox Talk - Safe Usage Of PPE
PPE is last line of defence which means there is nothing between you and your PPE that will protect you from a Hazard.
Below are the ways in which PPE fails to Protect us are;
1. Wrong PPE:
Wearing only Light Eye Protection while grinding.
Use of PVC gloves when there is need of rubber gloves.
Using dust mask when vapor mask required.
2. Damaged of modified PPE:
Drilling holes in ear protection.
Removing vents from goggles.
Torn acid suit.
3. Not wearing specified PPE:
Not wearing goggles while drilling.
Not wearing gloves while lifting.
Not wearing ear defenders whilst grinding.
4. Wearing PPE incorrectly:
Safety helmet on backwards.
Overalls tied around waist.
Earplugs no inserted into ear canal.
5. Wearing contaminated PPE:
Tipping contamination on goggles into own eyes when removing.
Removing acid suit without decontaminating.
Using PPE not issued to you.
To counter these failures PPE should only be used if the individual is competent in its use. The individual has inspected the PPE. The individual has been made aware of the correct method of putting on and removing PPE.
Always do assessments to ensure you have the correct PPE for the job.
Personal protection is the last line of defence. It is personal to you.
If you abuse it, fail to use it or are given the wrong type it is only you who will be injured.
Follow below to avoid failure of PPE usage:
• In case of Doubt, ask for the same.
• Get PPE issued from authorised.
• Check it every-time before use.
• Wear it every-time.
• And last but not the least, if you take of your PPE then PPE will take care of you.
Ensure Safe Usage Of PPE to protect yourself from a Hazard.
Visit us to get full articles and more topics on Environment, Health, Fire And Safety at https://globalehs.co.in, you can also join us on social media to get instant update by subscribe/Join with the help of link given in the web site or by visiting below links.
Website: https://globalehs.co.in
LinkedIn: https://www.linkedin.com/company/globalehs
YouTube: https://youtube.com/channel/UCeUtB5v5Xv209bOE7cs16uw?sub_confirmation=1
Facebook: https://www.facebook.com/groups/5113594842063456
WhatsApp Group: https://chat.whatsapp.com/GMyJtKoq3Rf09cqB6WgvtI
Telegram Channel: https://t.me/globalehs
Twitter: https://twitter.com/Global_EHS1
Medium: https://medium.com/@connect.globalehs
Pinterest: https://in.pinterest.com/connectglobalehs/global-ehs/
Office Safety Awareness
DESIGNED TO REDUCE EXCESSIVE BENDING AND STRETCHING.
GOOD HOUSEKEEPING IS ESSENTIAL.
NEVER STORE ITEMS UNDER YOUR DESK.
NEVER STORE ITEMS ON TOP OF CUPBOARDS.
NEVER LEAVE DESK AND/OR FILING CABINET DRAWERS OPEN
With the Odoo 15, a new feature is introduced into warehouse management called Reservation methods. which is used to reserve products used in a particular operation type: Delivery. This will ensure that the products are reserved for the defined operations of the company at required times.
Training Slides of Safety Precautions & Emergency Response Plan discussing the importance of Safety.
For further information regarding the course, please contact:
info@asia-masters.com
www.asia-masters.com
Forklifts are extremely useful workplace vehicles, as long as they are used safely and properly by operators who have been trained and are deemed competent to use them. Forklifts are dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing). Forklift accidents can cause serious injury, death, property and product damage. Accidents can be prevented if risk assessment are conducted, safe work procedures are followed, regular Tool Box Talks are conducted and HSE continuous surveillance observations of work tasks are performed periodically.
Common Forklift Hazards:
• Overloading
• Unsafe Stacking
• Speeding
• Unauthorized operation of forklift
• Untrained forklift operators.
• Pedestrians and forklifts moving in the same place.
• Obstruction in the path e.g. overhead, uneven ground surfaces, blind corners etc.
• Reversing
Common Safe Practices:
• Prior to use, forklifts must be inspected by a competent person, & inspection sticker should be posted on it.
• Only trained and authorized operators can operate a forklift.
• Carry out daily forklift pre-operation checks using checklist.
• Report to supervisor any forklift damage or problem.
• Don’t use a forklift to lift a worker.
• Check the load loads carefully before moving them for stability and damage.
• Slow down and sound the horn at crossings, and locations where view is blocked.
• Do not authorize anyone to stand or walk under the load or forklift machinery.
• Be aware of the height of the load, mast and overhead guard of the forklift when entering or existing buildings.
• Don’t handle loads that are above the weight capacity of the forklift.
• Follow the speed limit.
• Flagmen must be available while forklift is in operation.
• Focus on the travelling path and keep a clear view of it.
• When leaving a forklift, pull the parking brake, lower the forks and neutralize the controls.
• Don’t drive and raise load at the same time
• Don’t make sudden sharp turns
• Don’t brake suddenly when the forklift is loaded.
• Watch out for overhead structures (e.g. pipes & beams)
• Follow traffic management.
• Use rear view mirrors and camera while reversing.
First Aid In The Workplace | EmploysureEmploysure AU
This presentation provides an overview of first aid in the workplace. It is designed to help employers understand their rights and obligations, covering first aid kits, first aiders and other considerations.
--------
Employsure is Australia’s leading workplace relations specialist – providing support with employment relations, HR services, and workplace health & safety. Employsure works alongside employers to set solid foundations for business success. With highly skilled professionals assisting over 24,000 business owners Australia-wide, Employsure provides small to medium-sized businesses with the tools, advice, and assistance to be workplace confident.
Instilling Workplace Confidence
Employsure’s main objective as workplace relations specialists is to give business owners peace of mind when they need it most. This is achieved by providing employers advice on the Fair Work Act, National Employment Standards (NES), and relevant Modern Awards. Employsure clients receive tailored documentation such as employment contracts, policies, and procedures – as well as immediate updates of relevant legislative changes. May the situation present itself, Employsure also provides its clients with representation and legal protection.
Employsure also reviews workplace health and safety processes and documents to identify specific gaps and solutions. Based on this, best practice tools are provided to lay the foundations for ensuring a fair and safe workplace.
In essence, Employsure believes that all business owners, no matter their size, deserve access to comprehensive, quality and honest advice – and support that is scalable to the needs of their business.
--------
CONNECT WITH US
Email: comms@employsure.com.au
Website: https://employsure.com.au/
YouTube: https://www.youtube.com/user/Employsure/
Facebook: https://www.facebook.com/employsure.com.au/
LinkedIn: https://au.linkedin.com/company/employsure
Twitter: https://twitter.com/Employsure
Instagram: https://www.instagram.com/employsure/
WHAT? Within our industry the personal health effects of noise and vibration are well known and should now be embedded in your Company Health and safety arrangements. Construction industry is one of the leading sources of noise complaints made to Local Authorities. Something is considered ‘noisy’ when the sound is unwanted by the listener. Noise and vibration emissions can disturb local residents and give rise to complaints and delays.
Office Safety Awareness
DESIGNED TO REDUCE EXCESSIVE BENDING AND STRETCHING.
GOOD HOUSEKEEPING IS ESSENTIAL.
NEVER STORE ITEMS UNDER YOUR DESK.
NEVER STORE ITEMS ON TOP OF CUPBOARDS.
NEVER LEAVE DESK AND/OR FILING CABINET DRAWERS OPEN
With the Odoo 15, a new feature is introduced into warehouse management called Reservation methods. which is used to reserve products used in a particular operation type: Delivery. This will ensure that the products are reserved for the defined operations of the company at required times.
Training Slides of Safety Precautions & Emergency Response Plan discussing the importance of Safety.
For further information regarding the course, please contact:
info@asia-masters.com
www.asia-masters.com
Forklifts are extremely useful workplace vehicles, as long as they are used safely and properly by operators who have been trained and are deemed competent to use them. Forklifts are dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing). Forklift accidents can cause serious injury, death, property and product damage. Accidents can be prevented if risk assessment are conducted, safe work procedures are followed, regular Tool Box Talks are conducted and HSE continuous surveillance observations of work tasks are performed periodically.
Common Forklift Hazards:
• Overloading
• Unsafe Stacking
• Speeding
• Unauthorized operation of forklift
• Untrained forklift operators.
• Pedestrians and forklifts moving in the same place.
• Obstruction in the path e.g. overhead, uneven ground surfaces, blind corners etc.
• Reversing
Common Safe Practices:
• Prior to use, forklifts must be inspected by a competent person, & inspection sticker should be posted on it.
• Only trained and authorized operators can operate a forklift.
• Carry out daily forklift pre-operation checks using checklist.
• Report to supervisor any forklift damage or problem.
• Don’t use a forklift to lift a worker.
• Check the load loads carefully before moving them for stability and damage.
• Slow down and sound the horn at crossings, and locations where view is blocked.
• Do not authorize anyone to stand or walk under the load or forklift machinery.
• Be aware of the height of the load, mast and overhead guard of the forklift when entering or existing buildings.
• Don’t handle loads that are above the weight capacity of the forklift.
• Follow the speed limit.
• Flagmen must be available while forklift is in operation.
• Focus on the travelling path and keep a clear view of it.
• When leaving a forklift, pull the parking brake, lower the forks and neutralize the controls.
• Don’t drive and raise load at the same time
• Don’t make sudden sharp turns
• Don’t brake suddenly when the forklift is loaded.
• Watch out for overhead structures (e.g. pipes & beams)
• Follow traffic management.
• Use rear view mirrors and camera while reversing.
First Aid In The Workplace | EmploysureEmploysure AU
This presentation provides an overview of first aid in the workplace. It is designed to help employers understand their rights and obligations, covering first aid kits, first aiders and other considerations.
--------
Employsure is Australia’s leading workplace relations specialist – providing support with employment relations, HR services, and workplace health & safety. Employsure works alongside employers to set solid foundations for business success. With highly skilled professionals assisting over 24,000 business owners Australia-wide, Employsure provides small to medium-sized businesses with the tools, advice, and assistance to be workplace confident.
Instilling Workplace Confidence
Employsure’s main objective as workplace relations specialists is to give business owners peace of mind when they need it most. This is achieved by providing employers advice on the Fair Work Act, National Employment Standards (NES), and relevant Modern Awards. Employsure clients receive tailored documentation such as employment contracts, policies, and procedures – as well as immediate updates of relevant legislative changes. May the situation present itself, Employsure also provides its clients with representation and legal protection.
Employsure also reviews workplace health and safety processes and documents to identify specific gaps and solutions. Based on this, best practice tools are provided to lay the foundations for ensuring a fair and safe workplace.
In essence, Employsure believes that all business owners, no matter their size, deserve access to comprehensive, quality and honest advice – and support that is scalable to the needs of their business.
--------
CONNECT WITH US
Email: comms@employsure.com.au
Website: https://employsure.com.au/
YouTube: https://www.youtube.com/user/Employsure/
Facebook: https://www.facebook.com/employsure.com.au/
LinkedIn: https://au.linkedin.com/company/employsure
Twitter: https://twitter.com/Employsure
Instagram: https://www.instagram.com/employsure/
WHAT? Within our industry the personal health effects of noise and vibration are well known and should now be embedded in your Company Health and safety arrangements. Construction industry is one of the leading sources of noise complaints made to Local Authorities. Something is considered ‘noisy’ when the sound is unwanted by the listener. Noise and vibration emissions can disturb local residents and give rise to complaints and delays.
Silo explodes at ready-mix plant...The top (cap) of the silo was thrown into the air, across a road, landing in an adjacent property. Fortunately, no injuries occurred as a result of this incident.
Dust and emissions, such as the recent publicity in the national press relating to the health hazards of particulates in diesel powered vehicles exhaust emissions, can cause health risks and odours at high concentrations may annoy neighbours and those affected by our activities.
Oxygen is a colourless, odourless and tasteless gas and makes up to 21% of the air we breathe, it has a relative density of 1.1 which means it is slightly heavier than air.
Oils, greases, solvents and PTFE tape may react violently with oxygen. You should never use oil or grease to lubricate oxygen or oxygen enriched equipment as they can spontaneously burn with explosive violence.
Lifting and rigging operations are some of the most hazardous activities we regularly undertake, day in day out. The consequences of something going wrong during a lifting or rigging operation can literally be fatal.
TOOLBOX TALK | safe use of lift trucks and telehandlersAlan Bassett
Lift trucks are widely used throughout industry for moving materials and goods, but they also feature prominently in workplace accidents. Even an incident not causing injury may result in costly damage to lift trucks, buildings, fittings and the goods being handled.
Last year in the UK 40 people died and nearly 43,000 reported non fatal injuries as a result of a fall from height in the workplace. Falls from height are the most common cause of fatal injury and the second most common cause of major injury to employees, accounting for around 15% of all such injuries...
During December the monthly average number of fires, injuries and fatalities more than doubles in households across the UK.
Read these 12 Tips to a Safer Christmas and enjoy the festive season...
Winter is almost upon us and at this time of the year snow and ice introduce an additional hazard on scaffold platforms and access’s. This toolbox talk covers both working on scaffolds and the hazards of winter.