For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
This document contains discussion questions and assignments for multiple weeks of a quality management course. It includes questions about total quality management philosophies and tools, customer focus, statistical process control, and implementing quality systems. It also contains a case study assignment on using control charts to analyze variation in circuit board drilling measurements from a supplier. Students are asked to calculate control limits, create X-Bar and R charts, identify out-of-control points, recalculate with their removal, and discuss the changes between the original and updated control charts.
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
This document contains summaries of tutorials purchased from www.tutorialrank.com for various courses. It includes summaries of discussion questions for BSOP 326 weeks 1-7 that cover topics like total quality management, quality philosophies and standards, statistical tools, and implementing TQM. It also includes summaries of a BSOP-326 week 4 midterm exam that covers high-performance work systems and a BSOP-326 week 7 case study on Fujiyama Electronics that involves analyzing process data using control charts. The document provides an overview of the content covered in the tutorials purchased from the tutorial website.
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
This document contains discussion questions and assignments for multiple weeks of a quality management course. It includes questions about total quality management philosophies and tools, customer focus, statistical process control, and implementing quality systems. It also contains a case study assignment on using control charts to analyze variation in circuit board drilling measurements from a supplier. Students are asked to calculate control limits, create X-Bar and R charts, identify out-of-control points, recalculate with their removal, and discuss the changes between the original and updated control charts.
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
This document contains summaries of tutorials purchased from www.tutorialrank.com for various courses. It includes summaries of discussion questions for BSOP 326 weeks 1-7 that cover topics like total quality management, quality philosophies and standards, statistical tools, and implementing TQM. It also includes summaries of a BSOP-326 week 4 midterm exam that covers high-performance work systems and a BSOP-326 week 7 case study on Fujiyama Electronics that involves analyzing process data using control charts. The document provides an overview of the content covered in the tutorials purchased from the tutorial website.
Operations management practical problem ii flow charting a procesPOLY33
This document discusses two major project failures: Healthcare.gov and the Denver Airport Baggage System project. Healthcare.gov failed due to an overly aggressive schedule and not meeting customer needs, as the site could not handle the high volume of users. The Denver Airport Baggage System was a $1.1 million per day failure over a 16 month delay, as the complex automated system was plagued by architectural issues, lack of expertise, and was unable to detect problems. Both projects suffered from issues like poorly defined scopes, unrealistic schedules, lack of requirements and testing, and inexperienced teams. The document emphasizes learning from such failures to effectively manage projects.
For more course tutorials visit
www.tutorialrank.com
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
CIS 510 Week 7 Assignment 3 Creating a Domain Model Class Diagram (2 Papers)
CIS 510 Week 9 Assignment 4 Diversity of Approaches (2 Papers)
CIS 510 Week 10 Technical Paper Final Project Plan (2 Papers)
PSYCH 625 MENTOR Become Exceptional--psych625mentor.comshanaabe77
FOR MORE CLASSES VISIT
www.psych625mentor.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
7 QC Tools PDF | An eBook with A Detailed Description and Practical ExamplesShakehand with Life
The document describes a book about 7 quality control tools. It includes an introduction to each of the 7 tools: process flow diagram, check sheet, histogram, Pareto diagram, cause-and-effect diagram, scatter diagram, and control charts. For each tool it provides details on what it is, how to construct it, examples, and how to construct the tool in Microsoft Excel. It also includes an introduction to Kaizen and 5S, practice problems, a test, and answers.
cis 510 Life of the Mind/newtonhelp.com bellflower6
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
Embodiment design or preliminary design is the phase where the design concept is given physical form. It involves three main activities: product architecture, configuration design, and parametric design. Product architecture determines the arrangement of physical elements into modules. Configuration design focuses on special-purpose parts and standard components. Parametric design sets exact dimensions and tolerances. System modeling and functional modeling help structure the design problem and identify inputs and outputs. Tools like FAST and subtract-and-operate are used to develop the functional decomposition of the design. Simulation allows testing designs virtually before validation.
For more course tutorials visit
www.tutorialrank.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
PSYCH 625 Assignment Week 5 Correlation Worksheet (New Syllabus)
PSYCH 625 Assignment Week 6 Chi-Square Worksheet (New Syllabus)
PSYCH 625 Week 2 Statistics Project, Part 1 Opening Data In Microsoft®
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
PSYCH 625 Effective Communication - snaptutorial.comdonaldzs41
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
The document introduces the design cycle model, which represents the process designers use to refine solutions. It consists of 6 stages: identifying needs, researching/specifying requirements, generating ideas, developing solutions, testing solutions, and evaluating. Designers use techniques like brainstorming, attribute listing, and morphological synthesis to generate ideas. They communicate ideas through drawings, models, and other visuals. The process is iterative and involves both analytical and conceptual thinking.
This document discusses conducting needs assessments for interactive learning systems. It provides objectives for understanding needs assessment methods, key issues addressed, and effective presentation of results. Needs assessments identify important goals and target audiences for a proposed product. Traditional needs assessment approaches are outlined, including determining purposes and identifying sources to understand what is happening versus what should be happening. Effective needs assessments for interactive learning systems focus on key questions and use rapid prototyping to refine product requirements based on user testing.
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting/mechanics.
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting and mechanics.
GG Freightways (GGFRT) IT Decision Paper AssignmentBefore you be.docxshericehewat
GG Freightways (GGFRT) IT Decision Paper Assignment
Before you begin this assignment, be sure you have read the “GG Freightways Case Study,” any feedback on your proposed IT project from your ITSP Part 2 assignment, and the previously assigned course materials.
Purpose of this Assignment
This assignment gives you the opportunity to apply the course concepts to develop an IT Decision Paper to explain and defend an IT project at GG Freightways (GGFRT). This assignment specifically addresses the following course outcomes to enable you to:
· Apply best practices in information technology management and governance to make, defend, and justify an IT decision.
IT Decision Paper for Your Proposed IT Project
For your ITSP, Part 2, you proposed an IT project for GGFRT. Lance, the CIO at GGFRT, has asked you to write an IT Decision Paper to explain your proposed project. He wants to use the Paper to gain approval from the Governance Board to move forward with the project. This assignment uses a format for a Decision Paper that has been tailored to the course material covered in this class. You may work for an organization that has a format for IT decision papers, and it would be a good idea for you to look at it, but it will likely be structured a little differently from this one. Each organization develops tools and techniques that will work for them.
Assignment
You will develop an IT Decision Paper, using the outline below. Each of the topics to be included in your outline is covered in the course content readings assigned thus far. In addition to the course materials, at least one external resource (resource other than those provided in the class) must be used. Two or more cited references will earn top credit. Use a separate References page to list just the references you have cited. Remember to use the APA formatting rules and correctly cite and reference your sources with APA format. Use the Grading Rubric to be sure you have covered everything.
Please use this outline to build your IT Decision Paper. Use the numbering and headings shown below.
1. Project Description – In two or three sentences:
(1) describe the IT project you proposed for GGFRT in Part 2 of your ITSP.
(2) Describe what major function(s) the system would perform and who would use it. (Do not provide a technical description with hardware, software, etc.)
2. Strategic Alignment – In a short paragraph:
(1) explain how the proposed project aligns to the business strategic objectives in Part 1 of your ITSP, and,
(2) how the proposed project aligns to the IT strategies in Part 2 of your ITSP.
Your proposed project must be aligned directly with at least one business strategic objective and one IT strategy shown in your ITSP.
3. IT Portfolio Roadmap Alignment – In a short paragraph:
(1) Briefly explain where this project fits into the IT Portfolio Roadmap you included in Part 2 of your ITSP.
(2) What functional area does it support?
(3) W ...
OPS 571 Effective Communication - tutorialrank.comBartholomew54
For more course tutorials visit
www.tutorialrank.com
a. Observe the critical path diagram. Why are there two arrows pointing to task F?
b. Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days
Case Study 9.2 – Drug Testing Question (500 words minimum) Wh.docxketurahhazelhurst
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“What argument would you use, for or against a decision by the employer in this case to insist on expanding the drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own time? Support your answer.
Case Study 10.2 Unfair Labor Practice By a Union
Question: (500 words minimum):
“How could the union have stopped individuals from the intimidating actions that allegedly went on in this case? Support your answer.”
Grading Criteria
Grading Criteria: 500 Word Min.
Your response to the discussion question(s) must be tied back to the chapter material (Case Study) and outside research is expected. When I ask you to support your answer, you are expected to combine opinion with, minimum 2, citations (Always cite your sources utilizing APA 6th Edition format), insight from your experiences, observations of others experiences, analysis of the facts/information and a conclusion. PLEASE do not limit your citations to just the book! Find other supporting material outside of the class structure
Case Study 9
.2
–
Drug
Testing
Question: (
500 words minimum
)
:
“
What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to
include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“ What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
IT 328 Milestone Two Guidelines and Rubric
Your Role and the Triple Constraint
Overview: In Milestone One, you began your progress toward successful completion of your final project, the risk analysis and mitigation memo. You will now
continue this preparatory work in Milestone Two by focusing on a technical role. You will consider how the tasks assigned to the role fit into an integrated
schedule found in a Gantt chart. You will then work with the triple constraint, showing how changes to it may impact the project, while proposing a new project
element that will enhance user experience with the student degree progress tool. It is important to note that this milestone addresses Section I, Parts C and D of
your final project. For purposes of this activity, these items have been further broken down than they are in the final version of your project; this will help guide
you through all the aspects of this point in your learning experience.
As you are beginning to see, working within project budgets and staying on schedule typically requires a team effort, as work tasks must be completed efficiently
and often in the correct order for the project to stay on track. Additions to the p ...
System Proposal TemplateCSC 545 System Design When preparing a.docxssuserf9c51d
System Proposal Template
CSC 545 System Design
When preparing a systems proposal, systems analysts should arrange the following items in order:
Ten Main Section of your System Proposal
1. Cover Letter
List of people who did the study and summarize the objectives of the study are provided in your cover letter. Also, prearranged time and place for oral presentation of the system proposal can be included. Keep your cover letter concise (one page maximum) and friendly.
2. Title Page of project
Include the name of the project, the names of the systems analysis team members, and the date the proposal is submitted.
3. Table of Contents
If the proposal is very short (less than ten pages), you can omit the table of contents since it is unnecessary on such a short document. The purpose of your table of contents is to indicate the contents of your proposal.
4. Executive Summary (including recommendations)
Usually, the executive summary is 250 to 375 words and can answer the questions such as who, what, when, where, why and how of the proposal. It should also include recommendation of the system analysts since some people will only have time to read the summary.
5. Outline of system study with appropriate documentation
Provides information about all the methods used in the study, and who or what was studied.
6. Detailed results of systems study
The details what the system analyst has found out about the system through all of the methods described are included in this section. It also presents problems with the system
7. Systems alternatives (3 or 4 possible solutions)
The analyst will present two or three alternative solutions that directly address the aforementioned problems. Each alternative should be explored separately. Describe the costs and benefits of each situation.
8. System’s analysts’ recommendations
After the systems analysis team has weighed the alternatives, it will have a definite professional opinion about which solution is most workable and best to solve the problem. It expresses the recommended solution.
9. Summary
It is brief statement that mirrors the content of your executive summary. It gives the objectives of the study and the recommended solution. Also, it allows the analyst one more chance to stress the project’s importance and feasibility along with the value of the recommendations.
10. Appendices
It might include pertinent correspondence, a summary of phases completed in the study, detailed graph for analyses purposes, or even previously done systems studies.
Source: http://sampleproposal.net
Project Design Document Template
CSC 845
Project Title
[Give your project a short but meaningful title]
Problem Definition
[In one or two paragraphs, describe the problem that you are trying to solve. For some projects in business this may be something that needs to be fixed but for the class project, you will be describing a brand new mobile application here. Mention what you application is, why your application will he ...
The document discusses the systems development life cycle (SDLC) process for planning, creating, testing, and deploying information systems. It describes the main stages of the SDLC as preliminary analysis, systems analysis, systems design, development, integration and testing, acceptance and deployment, maintenance, and evaluation. It also discusses problems with the traditional sequential SDLC model such as long development cycles and difficulty accommodating changes. The incremental waterfall model is presented as an alternative that develops the system in smaller incremental releases.
Operations management practical problem ii flow charting a procesPOLY33
This document discusses two major project failures: Healthcare.gov and the Denver Airport Baggage System project. Healthcare.gov failed due to an overly aggressive schedule and not meeting customer needs, as the site could not handle the high volume of users. The Denver Airport Baggage System was a $1.1 million per day failure over a 16 month delay, as the complex automated system was plagued by architectural issues, lack of expertise, and was unable to detect problems. Both projects suffered from issues like poorly defined scopes, unrealistic schedules, lack of requirements and testing, and inexperienced teams. The document emphasizes learning from such failures to effectively manage projects.
For more course tutorials visit
www.tutorialrank.com
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
CIS 510 Week 7 Assignment 3 Creating a Domain Model Class Diagram (2 Papers)
CIS 510 Week 9 Assignment 4 Diversity of Approaches (2 Papers)
CIS 510 Week 10 Technical Paper Final Project Plan (2 Papers)
PSYCH 625 MENTOR Become Exceptional--psych625mentor.comshanaabe77
FOR MORE CLASSES VISIT
www.psych625mentor.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
7 QC Tools PDF | An eBook with A Detailed Description and Practical ExamplesShakehand with Life
The document describes a book about 7 quality control tools. It includes an introduction to each of the 7 tools: process flow diagram, check sheet, histogram, Pareto diagram, cause-and-effect diagram, scatter diagram, and control charts. For each tool it provides details on what it is, how to construct it, examples, and how to construct the tool in Microsoft Excel. It also includes an introduction to Kaizen and 5S, practice problems, a test, and answers.
cis 510 Life of the Mind/newtonhelp.com bellflower6
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
Embodiment design or preliminary design is the phase where the design concept is given physical form. It involves three main activities: product architecture, configuration design, and parametric design. Product architecture determines the arrangement of physical elements into modules. Configuration design focuses on special-purpose parts and standard components. Parametric design sets exact dimensions and tolerances. System modeling and functional modeling help structure the design problem and identify inputs and outputs. Tools like FAST and subtract-and-operate are used to develop the functional decomposition of the design. Simulation allows testing designs virtually before validation.
For more course tutorials visit
www.tutorialrank.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
PSYCH 625 Assignment Week 5 Correlation Worksheet (New Syllabus)
PSYCH 625 Assignment Week 6 Chi-Square Worksheet (New Syllabus)
PSYCH 625 Week 2 Statistics Project, Part 1 Opening Data In Microsoft®
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
PSYCH 625 Effective Communication - snaptutorial.comdonaldzs41
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
The document introduces the design cycle model, which represents the process designers use to refine solutions. It consists of 6 stages: identifying needs, researching/specifying requirements, generating ideas, developing solutions, testing solutions, and evaluating. Designers use techniques like brainstorming, attribute listing, and morphological synthesis to generate ideas. They communicate ideas through drawings, models, and other visuals. The process is iterative and involves both analytical and conceptual thinking.
This document discusses conducting needs assessments for interactive learning systems. It provides objectives for understanding needs assessment methods, key issues addressed, and effective presentation of results. Needs assessments identify important goals and target audiences for a proposed product. Traditional needs assessment approaches are outlined, including determining purposes and identifying sources to understand what is happening versus what should be happening. Effective needs assessments for interactive learning systems focus on key questions and use rapid prototyping to refine product requirements based on user testing.
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting/mechanics.
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting and mechanics.
GG Freightways (GGFRT) IT Decision Paper AssignmentBefore you be.docxshericehewat
GG Freightways (GGFRT) IT Decision Paper Assignment
Before you begin this assignment, be sure you have read the “GG Freightways Case Study,” any feedback on your proposed IT project from your ITSP Part 2 assignment, and the previously assigned course materials.
Purpose of this Assignment
This assignment gives you the opportunity to apply the course concepts to develop an IT Decision Paper to explain and defend an IT project at GG Freightways (GGFRT). This assignment specifically addresses the following course outcomes to enable you to:
· Apply best practices in information technology management and governance to make, defend, and justify an IT decision.
IT Decision Paper for Your Proposed IT Project
For your ITSP, Part 2, you proposed an IT project for GGFRT. Lance, the CIO at GGFRT, has asked you to write an IT Decision Paper to explain your proposed project. He wants to use the Paper to gain approval from the Governance Board to move forward with the project. This assignment uses a format for a Decision Paper that has been tailored to the course material covered in this class. You may work for an organization that has a format for IT decision papers, and it would be a good idea for you to look at it, but it will likely be structured a little differently from this one. Each organization develops tools and techniques that will work for them.
Assignment
You will develop an IT Decision Paper, using the outline below. Each of the topics to be included in your outline is covered in the course content readings assigned thus far. In addition to the course materials, at least one external resource (resource other than those provided in the class) must be used. Two or more cited references will earn top credit. Use a separate References page to list just the references you have cited. Remember to use the APA formatting rules and correctly cite and reference your sources with APA format. Use the Grading Rubric to be sure you have covered everything.
Please use this outline to build your IT Decision Paper. Use the numbering and headings shown below.
1. Project Description – In two or three sentences:
(1) describe the IT project you proposed for GGFRT in Part 2 of your ITSP.
(2) Describe what major function(s) the system would perform and who would use it. (Do not provide a technical description with hardware, software, etc.)
2. Strategic Alignment – In a short paragraph:
(1) explain how the proposed project aligns to the business strategic objectives in Part 1 of your ITSP, and,
(2) how the proposed project aligns to the IT strategies in Part 2 of your ITSP.
Your proposed project must be aligned directly with at least one business strategic objective and one IT strategy shown in your ITSP.
3. IT Portfolio Roadmap Alignment – In a short paragraph:
(1) Briefly explain where this project fits into the IT Portfolio Roadmap you included in Part 2 of your ITSP.
(2) What functional area does it support?
(3) W ...
OPS 571 Effective Communication - tutorialrank.comBartholomew54
For more course tutorials visit
www.tutorialrank.com
a. Observe the critical path diagram. Why are there two arrows pointing to task F?
b. Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days
Case Study 9.2 – Drug Testing Question (500 words minimum) Wh.docxketurahhazelhurst
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“What argument would you use, for or against a decision by the employer in this case to insist on expanding the drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own time? Support your answer.
Case Study 10.2 Unfair Labor Practice By a Union
Question: (500 words minimum):
“How could the union have stopped individuals from the intimidating actions that allegedly went on in this case? Support your answer.”
Grading Criteria
Grading Criteria: 500 Word Min.
Your response to the discussion question(s) must be tied back to the chapter material (Case Study) and outside research is expected. When I ask you to support your answer, you are expected to combine opinion with, minimum 2, citations (Always cite your sources utilizing APA 6th Edition format), insight from your experiences, observations of others experiences, analysis of the facts/information and a conclusion. PLEASE do not limit your citations to just the book! Find other supporting material outside of the class structure
Case Study 9
.2
–
Drug
Testing
Question: (
500 words minimum
)
:
“
What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to
include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“ What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
IT 328 Milestone Two Guidelines and Rubric
Your Role and the Triple Constraint
Overview: In Milestone One, you began your progress toward successful completion of your final project, the risk analysis and mitigation memo. You will now
continue this preparatory work in Milestone Two by focusing on a technical role. You will consider how the tasks assigned to the role fit into an integrated
schedule found in a Gantt chart. You will then work with the triple constraint, showing how changes to it may impact the project, while proposing a new project
element that will enhance user experience with the student degree progress tool. It is important to note that this milestone addresses Section I, Parts C and D of
your final project. For purposes of this activity, these items have been further broken down than they are in the final version of your project; this will help guide
you through all the aspects of this point in your learning experience.
As you are beginning to see, working within project budgets and staying on schedule typically requires a team effort, as work tasks must be completed efficiently
and often in the correct order for the project to stay on track. Additions to the p ...
System Proposal TemplateCSC 545 System Design When preparing a.docxssuserf9c51d
System Proposal Template
CSC 545 System Design
When preparing a systems proposal, systems analysts should arrange the following items in order:
Ten Main Section of your System Proposal
1. Cover Letter
List of people who did the study and summarize the objectives of the study are provided in your cover letter. Also, prearranged time and place for oral presentation of the system proposal can be included. Keep your cover letter concise (one page maximum) and friendly.
2. Title Page of project
Include the name of the project, the names of the systems analysis team members, and the date the proposal is submitted.
3. Table of Contents
If the proposal is very short (less than ten pages), you can omit the table of contents since it is unnecessary on such a short document. The purpose of your table of contents is to indicate the contents of your proposal.
4. Executive Summary (including recommendations)
Usually, the executive summary is 250 to 375 words and can answer the questions such as who, what, when, where, why and how of the proposal. It should also include recommendation of the system analysts since some people will only have time to read the summary.
5. Outline of system study with appropriate documentation
Provides information about all the methods used in the study, and who or what was studied.
6. Detailed results of systems study
The details what the system analyst has found out about the system through all of the methods described are included in this section. It also presents problems with the system
7. Systems alternatives (3 or 4 possible solutions)
The analyst will present two or three alternative solutions that directly address the aforementioned problems. Each alternative should be explored separately. Describe the costs and benefits of each situation.
8. System’s analysts’ recommendations
After the systems analysis team has weighed the alternatives, it will have a definite professional opinion about which solution is most workable and best to solve the problem. It expresses the recommended solution.
9. Summary
It is brief statement that mirrors the content of your executive summary. It gives the objectives of the study and the recommended solution. Also, it allows the analyst one more chance to stress the project’s importance and feasibility along with the value of the recommendations.
10. Appendices
It might include pertinent correspondence, a summary of phases completed in the study, detailed graph for analyses purposes, or even previously done systems studies.
Source: http://sampleproposal.net
Project Design Document Template
CSC 845
Project Title
[Give your project a short but meaningful title]
Problem Definition
[In one or two paragraphs, describe the problem that you are trying to solve. For some projects in business this may be something that needs to be fixed but for the class project, you will be describing a brand new mobile application here. Mention what you application is, why your application will he ...
The document discusses the systems development life cycle (SDLC) process for planning, creating, testing, and deploying information systems. It describes the main stages of the SDLC as preliminary analysis, systems analysis, systems design, development, integration and testing, acceptance and deployment, maintenance, and evaluation. It also discusses problems with the traditional sequential SDLC model such as long development cycles and difficulty accommodating changes. The incremental waterfall model is presented as an alternative that develops the system in smaller incremental releases.
OPS 571 Social Responsibility - snaptutorial.comDavisMurphyA94
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days?our readers.
EEE/CSE 120
Answer Sheet
Capstone Design Project
Name:__________________________
Instructor:__________________________
Class Time:________________________
Date:________________________
Task 4-1: Design of Synchronous Sequential Machines
Design #1 (Mealy machine)
: What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #1 (Mealy machine) here:
Design #2 (Moore machine): What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #2 (Moore machine) here:
Task 4-2: Simulate Both Designs in the Lab in Presence of the TA
Demonstrate that both of your circuits meet the completed design specification to the laboratory assistants and have the TAs apply a grade here.
Grade: 1st Design ____/15 Grade: 2nd Design____/15
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
Using the guidelines in the laboratory manual, list your criteria and associated weights here:
Criteria
Weight
Task 4-4: Apply the Criteria to Pick the Best Design
Describe how you applied the criteria and weighting system in the above task to pick the best design.
Which design is better based on your criteria and weighting system?
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
Demonstrate to a laboratory assistant that one of your designs works according to your completed specification.
Laboratory assistant evaluation:
Capstone Design Project: Lab Report Grade Sheet
Name:
Instructor Assessment:
Grading Criteria
Max Points
Points lost
Template
Neatness, Clarity, and Concision
5
Description of Assigned Tasks, Work Performed & Outcomes Met
Task 4-1: Design of Synchronous Sequential Machines
22
Task 4-2: Simulate Both Designs
30
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
5
Task 4-4: Apply the Criteria to Pick the Best Design
8
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
30
Self-Assessment Worksheet (The content of the self-assessment worksheet will not be graded. Full credit is given for including the completed worksheet.)
(2 extra points)
Points .
Financial Statement Analysis
Ratio Analysis Example
Prufrock Corporation
Balance Sheet as of December 31,2008
($ in millions)
Assets
Liabilities and Owners' Equity
Current assets
Current liabilities
Cash
$98
Accounts payable
$344
Accounts receivable
$188
Notes payable
$196
Inventory
$422
Total
$540
Total
$708
Long-term debt
$457
Fixed assets
Owners' equity
Net plant and equipment
$2,880
Common stock and paid-in surplus
$550
Total assets
$3,588
Retained earnings
$2,041
Total
$2,591
Total liabilities and owners' equity
$3,588
Prufrock Corporation
2008 Income Statement
($ in millions)
Sales
2311
Cost of goods sold
1344
Depreciation
276
Earnings before interest and taxes
691
Interest paid
141
Taxable income
550
Taxes (34%)
187
Net income
363
Dividends
121
Addition to retained earnings
242
*Create common size balance sheet and common size income statement.
*Calculate ratios for Prufrock Corporation
Short-term solvency or liquidity ratios
Liquidity ratio measures the firm’s ability to pay its bills over the short run without undue stress.
Current ratio=
*Do we have enough short-term liquid assets to cover our short-term debts?
Quick ratio (acid test ratio) =
*Do we have enough really liquid short-term assets to cover our short-term debts?
Long-term solvency, or financial leverage, ratios
Leverage ratio measures the form’s long-run ability to meet its obligations.
Total debt ratio=
What percentage of total assets is financed with either short- or long-term debt?
Debt-equity ratio=
Times interest earned=
* It measures how well a company has its interest obligations covered. Are we generating enough income to make out interest payments?
Asset management or turnover ratios
Turnover ratios measure asset use efficiency.
Inventory turnover=
*On average, how many times per year do we go through our inventory? (Excess inventory is expensive!)
Day’s sales Outstanding=
Fixed Assets Turnover Ratio=
Total Assets Turnover Ratio=
Profitability ratios
Operating margin=
Profit margin=
Return on assets (ROA) =
*What is profit per dollar of asset?
Return on equity (ROE) =
*What is the rate of return for stockholders?
Return on equity (ROE) = Profit margin * Total asset turnover * Equity multiplier
Market value ratios
(We assume that Prufrock has 33 million shares outstanding and stock sold for $88 per share at the end of the year.)
EPS=
Price-earnings ratio=
Market-to-book ratio=
4-1
Running head: FULL TITLE OF YOUR PAPER IN CAPS ON ONE LINE1
ABBREVIATED TITLE OF YOUR PAPER 2
Team Paper: Sources of and solutions to conflict in a virtual environment
PJM6210 Communication Skills for Project Managers
Month, day, year
Sources of Conflict in a Virtual Environment
Interpersonal Conflict 🡪 Jones
In the second paragraph, begin addressing your first topic or question. This should directly align to what you stated you were going to talk about in the first se ..
QSO 510 Final Project Guidelines and Rubric Overview .docxmakdul
QSO 510 Final Project Guidelines and Rubric
Overview
The final project for this course is the creation of a statistical analysis report.
Each day, operations management professionals are faced with multiple decisions affecting various aspects of the operation. The ability to use data to drive
decisions is an essential skill that is useful in any facet of an operation. The dynamic environment offers daily challenges that require the talents of the operations
manager; working in this field is exciting and rewarding.
Throughout the course, you will be engaged in activities that charge you with making decisions regarding inventory management, production capacity, product
profitability, equipment effectiveness, and supply chain management. These are just a few of the challenges encountered in the field of operations management.
The final activity in this course will provide you with the opportunity to demonstrate your ability to apply statistical tools and methods to solve a problem in a
given scenario that is often encountered by an operations manager. Once you have outlined your analysis strategy and analyzed your data, you will then report
your data, strategy, and overall decision that addresses the given problem.
The project is divided into two milestones, which will be submitted at various points throughout the course to scaffold learning and ensure quality final
submissions. These milestones will be submitted in Modules Three and Seven. The final project is due in Module Nine.
In this assignment, you will demonstrate your mastery of the following course outcomes:
Apply data-based strategies in guiding a focused approach for improving operational processes
Determine the appropriate statistical methods for informing valid data-driven decision making in professional settings
Select statistical tools for guiding data-driven decision making resulting in sustainable operational processes
Utilize a structured approach for data-driven decision making for fostering continuous improvement activities
Propose operational improvement recommendations to internal and external stakeholders based on relevant data
Prompt
Operations management professionals are often relied upon to make decisions regarding operational processes. Those who utilize a data-driven, structured
approach have a clear advantage over those offering decisions based solely on intuition. You will be provided with a scenario often encountered by an operations
manager. Your task is to review the “A-Cat Corp.: Forecasting” scenario, the addendum, and the accompanying data in the case scenario and addendum; outline
the appropriate analysis strategy; select a suitable statistical tool; and use data analysis to ultimately drive the decision. Once this has been completed, you will
be challenged to present your data, data analysis strategy, and overall decision in a concise report, justifying your analysis.
Specifically, the ...
Communications exampleStakeholder NameRoleInformationTimeframeMediaResponsible for UpdatesResponsible for DeliveryCarol AndersonProject SponsorSummary project status1st each monthe-mailTeamJames White (PM)Critical risks and issuesWeeklyDashboardJames White (PM)James White (PM)Budget & timeline performance1st each monthDashboardJames White (PM)James White (PM)James WhiteProject ManagerDetailed project statusWeeklyTeam status systemTeanTeam status systemAll risks and issuesWeeklyTeam status systemTeamTeam status systemResource, supplier, procurement budget & timeline performancee/o weeke-mailTeamFinance MatrixSam DeanSafety AuditorLevel of safety compliance of all deliverables produced1st each month1st each monthQuality ManagerQuality Manager
AMBERTON UNIVERSITY
MGT6220
Managing the Global Workforce
Dr. Di Ann Sanchez, SPHR, SHRM-SCP
ASSIGNMENTS
All assignments should be submitted in Microsoft Word using a 12 pt. Font size and formatted as
double-spaced using Times New Roman. Each of the Assignments has been divided into specific
questions with the suggested completion order. However, all the questions in Assignment One will
be submitted together by the due date and so forth. Only one Assignment will be submitted at a time.
Assignments may be submitted early so you can work around other scheduling issues; however, they
will not be graded until after the official due date. Once one Assignment has been graded and
returned to you, another may be submitted. All Assignments are to be of graduate-level quality and
will be graded accordingly.
ORIENTATION TO CLASS AND TEXT REVIEW – DUE SEE MOODLE AND SYLLABI
(11:30 pm CST). POST AN INTRODUCTION OF YOURSELF FOLLOWING THE
OUTLINE BELOW (DISCUSSION AND PARTICIPATION – 2.5 pts.)
Discussion Forum Assignment: Access the Discussion Forum for the class and post a Welcome
Introduction to your Classmates. Include such things as highlighted below.
Enrollment Assignment:
Your posting to the class should include the following:
Your Name
Your Occupation
Your Field of Study
What State do you live in?
How long have you been a student at Amberton University?
Why are you interested in this topic?
What is your learning style? MBTI
What do you hope to achieve at the end of this course?
Your expectations of Professor Sanchez
I have been in the Moodle Platform and have downloaded AND READ the Syllabus, Study
Guide, Assignments, and Reference Materials. I understand that all Assignments are due by
11:30 pm CST on the due dates.
Assignment Guidelines:
When completing assignments, please identify the question to which you are responding by retyping
the question. While retyping the question is not a typical APA style, it will assure that I see your
complete response. The following orientation should be submitted first to verify that students can
submit readable attached files and post information in the Disc ...
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days?our readers.
Discussion Explore and Discuss a Research StudyReview the Probl.docxmadlynplamondon
Discussion: Explore and Discuss a Research Study
Review the Problem Statement (p. 9), Purpose (p. 10), Theoretical Framework (p. 13), and Research Questions (p. 18) in the sample dissertation: Huber, R. L. (2014). Servant leadership, self-efficacy, and communities of inquiry in higher education online learning (Order No. 3623182). Available from ProQuest Dissertations & Theses Global. (1548333568). Discuss how the problem statement, purpose, and theoretical framework support the research questions. How does the review of a prior research study contribute to your understanding of the research process and dissertation process?
COM520 Written Assignment 1
Assignment: Adding Active Directory
In this assignment, you will answer questions relating to the impact of adding Active Directory to the Ken
7 Windows Limited environment.
Assignment Requirements
This assignment builds on the scenario of Ken 7 Windows Limited given as the last section of this
document. For this assignment, imagine yourself to be a security administrator working for Ken 7
Windows Limited. You have been asked to evaluate the option of adding the Active Directory to the Ken 7
Windows network. Here are some facts to help you work on this assignment.
Ken 7 has just purchased a new enterprise resource planning (ERP) software package and will place the
workstation computers which will use this ERP software at eight different locations on the shop floor. The
ERP software requires two database servers, four application servers, and two Web servers, all of which
run a Windows operating system. All above-mentioned servers and the shop floor workstations are new,
but there are 22 workstations, already in place, which work with an older software that Ken 7 used to
manage the manufacturing and accounting processes. The existing 22 workstations are grouped into
three workgroups: accounting, planning, and purchasing. Before you add the Active Directory to the
network, you have been asked to examine the effects of the Active Directory in several key areas.
Tasks
Provide the answers to the following questions to satisfy the key points of interest to the Ken 7 Windows
Limited management regarding the addition of the Active Directory to the network.
1. Currently, system administrators create Ken 7 users in each computer where users need access.
In the Active Directory, where will system administrators create Ken 7 users?
2. How will the procedures for making changes to the user accounts, such as password changes, be
different in the Active Directory?
3. What action should administrators take for the existing workgroup user accounts after converting
to the Active Directory?
4. How will the administrators resolve the differences between the user accounts defined on the
different computers? In other words, if user accounts have different settings on different
computers, how will the Active Directory address that issue?
5. How will the procedu ...
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-
Similar to Bsop 330Education Redefined / snaptutorial.com (16)
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
How to Fix the Import Error in the Odoo 17Celine George
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
South African Journal of Science: Writing with integrity workshop (2024)
Bsop 330Education Redefined / snaptutorial.com
1. BSOP 326 Week 1-7 All Discussion Questions
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
WEEK 3DQ 2 Who is the Customer
WEEK 4DQ 1 TQM & Teams
WEEK 4DQ 2 Employee Involvement
WEEK 5DQ 1 Cost of Quality
WEEK 5DQ 2 Supplier Relationships
WEEK 6DQ 1 Statistical Tools
WEEK 6DQ 2 Inspection & Process Evalutions
2. WEEK 7DQ 1 Implementing TQM
WEEK 7DQ 2 What is Six Sigma
***********************************
BSOP 326 Week 4 High-Performance Work
Systems – Midterm
For more classes visit
www.snaptutorial.com
1. (TCO 6) An effective leadership system is designed to accomplish all
of the following, except _____. (Points : 5)
2. (TCO 6) The traditional approach to strategy deployment is which of
the following? (Points : 5)
3. (TCO 3) The criteria for the Canadian Awards for Excellence are
most similar to which of the following? (Points : 5)
4. (TCO 3) ISO 9001 provides specific requirements for _____. (Points :
5)
5. (TCO 1) A consumer purchases a generic product at a cost of $5.00
instead of the competing brand-name product that sells for $7.00. The
consumer feels that there is no difference in quality between the generic
and brand-name products. This scenario illustrates which of the
following definitions of quality? (Points : 5)
3. 6. (TCO 1) During the Middle Ages, quality was built into the final
product. This approach to quality was lost with the advent of _____.
(Points : 5)
7. (TCO 1) Which of the following was the top priority of U.S.
manufacturing in the time period immediately following World War II?
(Points : 5)
8. (TCO 2) Which of the following systems does not have a role to play
in assuring quality in a manufacturing firm? (Points : 5)
9. (TCO 2) An increasingly important component in quality for service
firms is _____. (Points : 5)
10. (TCO 2) Services are generally _____ intensive, whereas
manufacturing is more _____ intensive. (Points : 5)
11. (TCO 2) Systems thinking can be applied to the analysis of _____.
(Points : 5)
12. (TCO 3) The Malcolm Baldrige National Quality Award serves
several purposes, except _____. (Points : 5)
13. (TCO 5) “Moments of truth” are instances when which of the
following occurs? (Points : 5)
14. (TCO 5) Which of the following is not true about the American
Customer Satisfaction Index? (Points : 5)
15. (TCO 7) Which of the following is not considered a “hard” measure
of the effectiveness of human-resource management? (Points : 5)
16. (TCO 4) Which of the following is the primary reason for Deming’s
position that slogans should be eliminated? (Points : 5)
4. 17. (TCO 4) The Deming philosophy focuses on improvements in
product and service quality by _____. (Points : 5)
18. (TCO 8) The key stages of a team’s life cycle include all of the
following, except for _____. (Points : 5)
Top of Form
Page 2
1. (TCO 4) Failure to understand Deming’s Profound Knowledge can
result in some severe problems. Answer the following three parts
relating Peter Scholtes's observations relating to the failure to understand
Deming’s Profound Knowledge:
1. Discuss what happens when people do not understand variation. (10
points)
2. Discuss what happens when people do not understand systems. (10
points)
3. Discuss what happens when people do not understand psychology.
(10 points)
(Points : 30)
2. (TCO 6) Answer the following three parts relating to the situational
leadership theory:
1. Discuss the leadership style that would be used if maturity level of the
follower was “able and willing.” (10 points)
2. Discuss the leadership style that would be used if maturity level of the
follower was “unable but willing.” (10 points)
5. 3. Discuss the leadership style that would be used if maturity level of the
follower was “able but
unwilling***********************************.” (10 points)
BSOP 326 Week 7 Fujiyama Electronics Case
Study
For more classes visit
www.snaptutorial.com
Fujiyama Electronics Case Study - Due Week 7
Objective
This case study looks at the behavior of a circuit board process though
the use of Control Charts. At least two Control Charts will need to be
constructed, and from them you will be asked to provide an assessment
of what you see. A template to facilitate the construction of the Control
Charts has been provided. You are not required to use this template. A
tutorial that outlines the steps for this case is located in Doc Sharing.
Problem Statement
Fujiyama Electronics, Inc. has had difficulties with circuit boards
purchased from an outside supplier. Unacceptable variability occurs
between two drilled holes that are supposed to be 5 cm apart on the
circuit boards. Thirty samples of four boards each were taken from
6. shipments from the supplier as shown in the data from the worksheet.
Data in the worksheet below can also be assessed here.
Project Deliverables
The student will submit the completed case study in a Word document to
their Dropbox by the end of class Week 7. The paper is worth 50 points.
The student will complete and/or answer the following questions.
Calculate X-Bar-Bar, R-Bar, and associated control limits using the data
in the table above. Create X-Bar•R (Average & Range) Control Charts
from the data in the table above. Discuss notable out-of-control
conditions displayed in the completed X-Bar•R (Average & Range)
Control Charts. Only consider points outside the control limits. Do not
consider runs, set of points within certain zones, etc. If the conditions
you note could be defined as assignable conditions and they are removed
from the process, what will happen to the X-Bar•R Control Chart?
(a) Remove the data related to the out-of-control points you observed
from the origainal data and recalculate a new X-Bar-Bar, R-Bar, and
associated control limits.
(b) Create new X-Bar•R (Average & Range) Control Charts from your
updated data.
Discuss how the two sets of Control Charts are different. What has
changed?
The format of the case study should conform to the Publication Manual
for the American Psychological Association (APA), 6th edition, for title
page and text. Citations and references are not required. A basic APA
tutorial can be found intheWebliography and a paper template can be
found in Doc Sharing. The completed case study will be submitted to
your Dropbox as an MS Word document. All graphics and charts will be
a part of the Word document and submitted as a file. Documents
7. authored in other applications such as WordPerfect or MS Works will
not be accepted.
This project is to be accomplished individually, and will reflect the work
of each student. All DeVry University policies are in effect including the
plagiarism policy. Late papers will not be accepted without prior
permission.
Submit your Fujiyama Case Study paper to the Dropbox located on the
silver tab at the top of this page by the end of Week 7. For instructions
on how to use theDropbox, read these Step-by-Step Instructions or
watch this Dropbox Tutorial.
See Syllabus section "Due Dates for Assignments & Exams" for due
date information.
Grading Rubrics
First Control Chart (40 Percent)
Points Possible
Points Earned
Comments
All calculations are correct.
5
X-Bar & R charts are presented and correct.
5
All conditions of importance discussed.
8. 10
Total
20
Second Control Chart (40 Percent)
Points Possible
Points Earned
Comments
All calculations are correct.
5
X-Bar & R charts are presented and correct.
5
Differences between the two sets of Control Charts are thoroughly
discussed.
10
Total
20
Mechanics (20 Percent)
Points Possible
9. Points Earned
Comments:
The paper, including the title page follows APA guidelines for format.
(References and citations not required)
2
Sentences are complete, clear, and concise.
2
The paper is laid out with effective use of headings, font styles, and
white space.
2
Rules of grammar, usage, and punctuation are followed.
2
Spelling is correct.
2
Total
10
Total (100 Percent)
Points Possible
10. Points Earned
Comments:
50
Best Practices
The following are the best practices in preparing this paper. Sample
papers, using the APA format, are located in Doc Sharing. Other useful
information has also been provided there, including an APA paper
template.
Cover Page - Include who you prepared the paper for, who prepared it,
and the date. Body of Your Work - Titles to identify different areas that
you address. State the main ideas, major points in each idea, and
supporting information. Break down each main idea you will use in the
body of your paper. Show some type of division like separate sections
that are labeled, separate groups of paragraphs, or headers. You would
include the information you found during your research and
investigation. Summary and Conclusion - Summarizing is similar to
paraphrasing but presents the gist of the material in fewer words than the
original. An effective summary identifies the main ideas and major
support points from the body of your work. Minor details are left out.
Additional hints on preparing the best possible project. Apply a three-
step process of writing… Plan, Write, and Complete. Prepare an outline
of your research paper before you go forward. Complete a first draft and
then go back to edit, evaluate, and make any changes required. Use
visual communication if it will help clarify and support your work. Any
material that can be removed and not affect the clarity of your work is
essentially filler, and should be avoided. Filler distracts from the flow of
your work and will most likely cause you to lose points. References -
Not required for this case study.
***********************************
11. BSOP 330 Entire Course All Discussion
Questions, Lab Assignments, Quiz Case Study
For more classes visit
www.snaptutorial.com
BSOP 330 Master Planning All Weeks Discussion Questions Devry
University
BSOP330 Week 1 Lab Assignment Problems 4.1, 4.5, 4.9 and 4.11,
pages 140-141
BSOP330 Week 2 Lab Assignments Chapter Four Problems 4.23, 4.27,
4.33, and 4.35
BSOP330 Week 2 Southwestern Case study
BSOP330 Week 3 Lab Assignments Chapter 13 problems 13.3, 13.5,
13.9, 13.21
BSOP330 Week 4 Lab Assignments Chapter 12, problems 12.1, 12.5,
12.9, 12.15
BSOP330 Week 4 Quiz
BSOP330 Week 4 Southwestern Case study Printing companies
Programs and Inserts
12. BSOP330 Week 5 Homework Problems Mater Production Schedule
Problem 1, 2 and 3
BSOP330 Week 5 Quiz
BSOP330 Week 6 Lab Assignments Chapter 14, problems 14.1, 14.3,
14.9, 14.13
BSOP330 Week 7 Case Study Final
BSOP330 Week 7 Lab Assignments Chapter 16, problems 16.1, 16.3,
16.5, and 16.9 (pages 640-641)
BSOP330 Week 7 Quiz
***********************************
BSOP 330 Master Planning All Weeks Discussion
Questions
For more classes visit
www.snaptutorial.com
BSOP-330 Master Planning All Weeks Discussion Questions Devry
University
***********************************
BSOP 330 Week 1 Lab Assignment Problems 4.1,
4.5, 4.9 and 4.11, pages 140-141
13. For more classes visit
www.snaptutorial.com
Problems: 4.1, 4.5, 4.9 and 4.11, pages 140-141.
Problems: 4.1: The following gives the number of pints of type A blood
used at Woodlawn Hospital in the past 6 weeks:
a) Forecast the demand for the week of October 12 using a 3-week
moving average.
b) Use a 3-week weighted moving average, with weights of .1, .3, and
.6, using .6 for the most recent week. Forecast demand for the week of
October 12.
c) Compute the forecast for the week of October 12 using exponential
smoothing with a forecast for August 31 of 360 and α = .2.
Problems: 4.5: The Carbondale Hospital is considering the purchase of a
new ambulance. The decision will rest partly on the anticipated mileage
to be driven next year. The miles driven during the past 5 years are as
follows:
Year Mileage
1 3,000
2 4,000
14. 3 3,400
4 3,800
5 3,700
a) Forecast the mileage for next year using a 2-year moving average.
b) Find the MAD based on the 2-year moving average forecast in part
(a).(Hint: You will have only 3 years of matched data.)
c) Use a weighted 2-year moving average with weights of .4 and .6 to
forecast next year’s mileage. (The weight of .6 is for the most recent
year.) What MAD results from using this approach to forecasting? (Hint:
You will have only 3 years of matched data.)
d) Compute the forecast for year 6 using exponential smoothing, an
initial forecast for year 1 of 3,000 miles, and α = .5
Problems: 4.9: Dell uses the CR5 chip in some of its laptop computers.
The prices for the chip during the past 12 months were as follows:
a) Use a 2-month moving average on all the data and plot the averages
and the prices
b) Use a 3-month moving average and add the 3-month plot to the graph
created in part (a).
c) Which is better (using the mean absolute deviation): the 2-month
average or the 3-month average?
d) d) Compute the forecasts for each month using exponential
smoothing, with an initial forecast for January of $1.80. Use α = .1, then
α = .3, and finally α = .5. Using MAD, which α is the best?
15. Problems: 4.11
Data collected on the yearly registrations for a Six Sigma seminar at the
Quality College are shown in the following table:
a) Use exponential smoothing with a smoothing constant of 0.3 to
forecast the registrations at the seminar given in Problem 4.10. To begin
the procedure, assume that the forecast for year 1 was 5,000 people
signing up.
b) What is the MAD?
***********************************
BSOP 330 Week 2 Lab Assignments Chapter Four
Problems 4.23, 4.27, 4.33, and 4.35
For more classes visit
www.snaptutorial.com
Chapter Four Problems 4.23, 4.27, 4.33, and 4.35.
4.23
a) Compute MAD and MAPE for management’s technique
b) Do management’s results outperform (i.e., have smaller MAD and
MAPE than) a naive forecast?
c) Which forecast do you recommend, based on lower forecast error?
16. 4.33
a) Forecast the number of transistors to be made next year, using linear
regression.
b) Compute the mean squared error (MSE) when using linear regression.
c) Compute the mean absolute percent error (MAPE).
4.35
a) Use the model to predict the selling price of a house that is 1,860
square feet.
b) A 1,860-square-foot house recently sold for $95,000. Explain why
this is not what the model predicted.
c) If you were going to use multiple regressions to develop such a
model, what other quantitative variables might you include?
d) What is the value of the coefficient of determination in this problem?
***********************************
BSOP 330 Week 2 Southwestern Case study
For more classes visit
www.snaptutorial.com
1. Develop a forecasting model, justifying its selection over other
techniques, and project attendance through 2007.
17. BSOP 330 Week 3 Lab Assignments Chapter 13
problems 13.3, 13.5, 13.9, 13.21
For more classes visit
www.snaptutorial.com
Chapter 12, problems 12.1
L. Houts Plastics is a large manufacturer of injection-molded plastics in
North Carolina. An investigation of the company’s manufacturing
facility in Charlotte yields the information presented in the table below.
How would the plant classify these items according to an ABC
classification system?
Chapter 12, problems 12.5
William Beville’s computer training school, in Richmond, stocks
workbooks with the following characteristics:
Demand ,500 units/year
Ordering cost S = $25/order
Holding cost H = $4/unit/year
a) Calculate the EOQ for the workbooks.
b) What are the annual holding costs for the workbooks?
18. c) What are the annual ordering costs?
Chapter 12, problems 12.9
Southeastern Bell stocks a certain switch connector at its central
warehouse for supplying field service offices. The yearly demand for
these connectors is 15,000 units. Southeastern estimates its annual
holding cost for this item to be $25 per unit. The cost to place and
process an order from the supplier is $75. The company operates 300
days per year, and the lead time to receive an order from the supplier is 2
working days.
a) Find the economic order quantity.
b) Find the annual holding costs.
c) Find the annual ordering costs.
d) What is the reorder point?
Chapter 12, problems 12.15
M. Cotteleer Electronics supplies microcomputer circuitry to a company
that incorporates microprocessors into refrigerators and other home
appliances. One of the components has an annual demand of 250 units,
and this is constant throughout the year. Carrying cost is estimated to be
$1 per unit per year, and the ordering cost is $20 per order.
a) To minimize cost, how many units should be ordered each time an
order is placed?
b) How many orders per year are needed with the optimal policy?
c) What is the average inventory if costs are minimized?
19. d) Suppose that the ordering cost is not $20, and Cotteleer has been
ordering 150 units each time an order is placed. For this order policy (of
) to be optimal, determine what the ordering cost would have to be.
***********************************
BSOP 330 Week 4 Lab Assignments Chapter 12,
problems 12.1, 12.5, 12.9, 12.15
For more classes visit
www.snaptutorial.com
L. Houts Plastics is a large manufacturer of injection-molded plastics in
North Carolina. An investigation of the company’s manufacturing
facility in Charlotte yields the information presented in the table below.
How would the plant classify these items according to an ABC
classification system?
Chapter 12, problems 12.5
William Beville’s computer training school, in Richmond, stocks
workbooks with the following characteristics:
Demand ,500 units/year
Ordering cost S = $25/order
Holding cost H = $4/unit/year
20. a) Calculate the EOQ for the workbooks.
b) What are the annual holding costs for the workbooks?
c) What are the annual ordering costs?
Chapter 12, problems 12.9
Southeastern Bell stocks a certain switch connector at its central
warehouse for supplying field service offices. The yearly demand for
these connectors is 15,000 units. Southeastern estimates its annual
holding cost for this item to be $25 per unit. The cost to place and
process an order from the supplier is $75. The company operates 300
days per year, and the lead time to receive an order from the supplier is 2
working days.
a) Find the economic order quantity.
b) Find the annual holding costs.
c) Find the annual ordering costs.
d) What is the reorder point?
Chapter 12, problems 12.15
M. Cotteleer Electronics supplies microcomputer circuitry to a company
that incorporates microprocessors into refrigerators and other home
appliances. One of the components has an annual demand of 250 units,
and this is constant throughout the year. Carrying cost is estimated to be
$1 per unit per year, and the ordering cost is $20 per order.
a) To minimize cost, how many units should be ordered each time an
order is placed?
21. b) How many orders per year are needed with the optimal policy?
c) What is the average inventory if costs are minimized?
d) Suppose that the ordering cost is not $20, and Cotteleer has been
ordering 150 units each time an order is placed. For this order policy (of
) to be optimal, determine what the ordering cost would have to be.
***********************************
BSOP 330 Week 4 Quiz
For more classes visit
www.snaptutorial.com
BSOP-330 Week 4 Quiz
***********************************
BSOP 330 Week 4 Southwestern Case study
Printing companies Programs and Inserts
For more classes visit
www.snaptutorial.com
22. 1. For the programs, what are the EOQ's for both printing companies?
How many orders of each size will be needed?
2. For the inserts, what are the EOQ's for both printing companies? How
many orders of each size will be needed?
3. Using the EOQ's above and volume order information provided, what
will be the cost of the programs and inserts if they are purchased from
Quality Printing
4. Using the EOQ's above and volume order information provided, what
will be the cost of the programs and inserts if they are purchased from
First Printing.
***********************************
BSOP 330 Week 5 Homework Problems Mater
Production Schedule Problem 1, 2 and 3
For more classes visit
www.snaptutorial.com
MASTER PRODUCTION SCHEDULE
MAKE-TO-STOCK
Beginning PAB prior to week number one is 500.
23. If the forecast is larger than the book orders, complete the MPS using
the forecast demand. If the booked orders is larger than the forecast
complete the MPS using the booked orders
Lead-time for MPS releases is one week.
All MPS releases must be in lot sizes of 250 units.
Period order coverage is one period.
1. Complete the MPS due line and the MPS released line.
2. Complete the PAB line.
3. Complete the ATP line.
BSOP Master Planning, Week 5 Assignment, Problem Two
Make-to-Stock MPS
GIVENS FOR THE MPS PROBLEM:
1. Beginning on-hand inventory prior to week one is 200 units.
2. If the forecast is larger than the book orders, complete the MPS using
the forecast demand. If the booked orders is larger than the forecast
complete the MPS using the booked orders
3. Lead-time for MPS planned orders is one week.
4. All MPS releases must be in lot sizes of 200 or multiples of 200.
REQUIRED:
Complete the MPS due and MPS planned lines.
24. Calculate the new projected on-hand inventory line.
Calculate the ATP line for the entire MPS.
BSOP330 Master Planning, Week 5, Problem 3
Forecast Disaggregation
Product Family Blenders
Model Number
Percent of the Annual Forecast
B-100
10.00%
B-200
7.00%
B-300
25.00%
B-400
30.00&
B-500
12.00%
25. B-600
16.00%
Total
100.00%
Note: the total percentage must equal exactly 100%.
If the aggregate forecast for the family of blenders for the month of
September is 5,000 units, complete the chart below
. ***********************************
BSOP 330 Week 5 Quiz
For more classes visit
www.snaptutorial.com
1.Question :(TCO 9, 10, & 12) The MPS
Student Answer:
must sum up to the total in the production plan.
can have any quantity necessary to meet customer demand.
is only used in make-to-stock manufacturing.
26. does not have to be tested for capacity limits.
2.Question :(TCO 12) In an assemble-to-order MPS, the items stocked
in inventory are
Student Answer:
finished goods.
component parts.
raw materials.
sub-assemblies.
3.Question :(TCOs 9, 11, & 12) Which one of the following pieces of
information would be more useful to the order entry department in a
make-to-stock company?
Student Answer:
The planned order receipt file
The planned MPS released quantity file
The available to promise file
The balance of the forecast quantity
4.Question :(TCO 12) A forecast
Student Answer:
is always 100 percent correct.
27. will get better and better the more time and money you spend.
is a time prediction of the future based on the past.
is a monthly project that marketing loves to do.
5.Question :(TCO 10 & 12) In job shop (make-to-order) operations, the
master production schedule is usually expressed in
Student Answer:
end items.
modules.
kits.
customer orders.
warehouse orders.
***********************************
BSOP 330 Week 6 Lab Assignments Chapter 14,
problems 14.1, 14.3, 14.9, 14.13
For more classes visit
www.snaptutorial.com
28. You have developed the following simple product structure of items
needed for your gift bag for a rush party for prospective pledges in your
organization. You forecast 200 attendees. Assume that there is no
inventory on hand of any of the items. Explode the bill of material.
(Subscripts indicate the number of units required.)
Chapter 14, problems 14.3
The demand for subassembly S is 100 units in week 7. Each unit of S
requires 1 unit of T and 2 units of U. Each unit of T requires 1 unit of V,
2 units of W, and 1 unit of X. Finally, each unit of U requires 2 units of
Y and 3 units of Z. One firm manufactures all items. It takes 2 weeks to
make S, 1 week to make T, 2 weeks to make U, 2 weeks to make V, 3
weeks to make W, 1 week to make X, 2 weeks to make Y, and 1 week to
make Z.
a) Construct a product structure. Identify all levels, parents, and
components.
b) b) Prepare a time-phased product structure.
Chapter 14, problems 14.9
As the production planner for Gerry Cook Products, Inc., you have been
given a bill of material for a bracket that is made up of a base, two
springs, and four clamps. The base is assembled from one clamp and
two housings. Each clamp has one handle and one casting. Each housing
has two bearings and one shaft. There is no inventory on hand.
Your boss at Gerry Cook Products, Inc., has just provided you with the
schedule and lead times for the bracket in Problem 14.8. The unit is to
be prepared in week 10. The lead times for the components are bracket
(1 week), base (1 week), spring (1 week), clamp (1 week), housing (2
weeks), handle (1 week), casting (3 weeks), bearing (1 week), and shaft
29. (1 week). a) Prepare the time-phased product structure for the bracket. b)
In what week do you need to start the castings?
Chapter 14, problems 14.13
Electro Fans has just received an order for one thousand 20-inch fans
due week 7. Each fan consists of a housing assembly, two grills, a fan
assembly, and an electrical unit. The housing assembly consists of a
frame, two supports, and a handle. The fan assembly consists of a hub
and five blades. The electrical unit consists of a motor, a switch, and a
knob. The following table gives lead times, on-hand inventory, and
scheduled receipts.
***********************************
BSOP 330 Week 7 Case Study Final
For more classes visit
www.snaptutorial.com
Question 1. Which variations in demand for police services should be
considered in an aggregate plan for resources? Which variations can be
accomplished with short-term scheduling adjustments?
Question 2. Evaluate the current staffing plan. What does it cost? Are
26 officers sufficient to handle the normal workload?
30. Question 3: Determine the cost of the Chiefs plan. Do you need to
implement the Chief's plan or can the current staff handle the load?
Explain your thinking
Question 4: From the data in the case, determine the schools current
cost to provide police services during football games.
Question 5: There isn't any one right answer for this question. This a
critical thinking question. Based on what you have read and the
scheduling and costs you put together, what do you see as alternatives
for the*********************************** manning the
schedule.
BSOP 330 Week 7 Lab Assignments Chapter 16,
problems 16.1, 16.3, 16.5, and 16.9
For more classes visit
www.snaptutorial.com
Chapter 16, problems 16.1, 16.3, 16.5, and 16.9 (pages 640-641)
16.1 Leblanc Electronics, Inc., in Nashville, produces short runs of
custom airwave scanners for the defense industry. You have been asked
by the owner, Larry Leblanc, to reduce inventory by introducing a
kanban system. After several hours of analysis, you develop the
following data for scanner connectors used in one work cell. How many
kanbans do you need for this connector?
31. Daily demand 1,000 connectors
Lead time 2 days
Safety stock day
Kanban size 500 connectors
16.3
Chris Millikan Manufacturing, Inc., is moving to kan-bans to support its
telephone switching-board assembly lines. Determine the size of the
kanban for subassemblies and the number of kanbans needed.
16.5
Discount-Mart, a major East Coast retailer, wants to determine the
economic order quantity (see Chapter 12 for EOQ formulas) for its
halogen lamps. It currently buys all halogen lamps from Specialty
Lighting Manufacturers, in Atlanta. Annual demand is 2,000 lamps,
ordering cost per order is $30, annual carrying cost per lamp is $12.
a) What is the EOQ?
b) What are the total annual costs of holding and ordering (managing)
this inventory?
c) How many orders should Discount-Mart place with Specialty
Lighting per year?
16.9
a) Given the following information about a product, at Phyllis
Simon’s firm, what is the appropriate setup time?
b) ***********************************
32. c)
BSOP 330 Week 7 Quiz
For more classes visit
www.snaptutorial.com
1. (TCOs 5 & 12) Manufacturing cycle time is best defined as the
(Points : 4)
length of the work shift, expressed in minutes per day.
time it takes a unit to move from one workstation to the next.
time between the start of one unit and the start of the next unit.
sum of all the task times to make one unit of a product.
time from raw materials receipt to finished product exit.
2. (TCOs 5 & 12) The implementation of JIT offers several advantages,
including (Points : 4)
reduced throughput.
increase in variability to better respond to variable demand.
decreased profit margins.
support for lean production.
increased work in process inventory.
3. (TCOs 5 & 12) Which of the following statements regarding JIT in
services is true? (Points : 4)
33. Restaurants do not use JIT layouts because they interfere with the
creation of a good service scape.
Excess customer demand in services such as air travel is met by dipping
into safety stocks.
All of the JIT techniques for dealing with suppliers, layout, inventory,
and scheduling are used in services.
Scheduling is not relevant to the effective use of JIT in services.
All of the above are false.
4. (TCO 12) Which of the following is the author of the phrase,
"Inventory is evil"? (Points : 4)
Poka Yoke
Pat "Keiretsu" Morita
Kanban Polka
Shigeo Shingo
None of the above
5. (TCO 12) Great Lakes Barge and Baggage Company makes, among
other things, battery-operated bilge pumps. Which of the following
activities isnot part of JIT? (Points : 4)
They communicate their schedules to suppliers.
They produce in long production runs to reduce the impact of setup
costs.
They use a pull system to move inventory.
They continuously work on reducing setup time.
They produce in small lots.
***********************************