For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
This document contains discussion questions and assignments for multiple weeks of a quality management course. It includes questions about total quality management philosophies and tools, customer focus, statistical process control, and implementing quality systems. It also contains a case study assignment on using control charts to analyze variation in circuit board drilling measurements from a supplier. Students are asked to calculate control limits, create X-Bar and R charts, identify out-of-control points, recalculate with their removal, and discuss the changes between the original and updated control charts.
This document contains summaries of tutorials purchased from www.tutorialrank.com for various courses. It includes summaries of discussion questions for BSOP 326 weeks 1-7 that cover topics like total quality management, quality philosophies and standards, statistical tools, and implementing TQM. It also includes summaries of a BSOP-326 week 4 midterm exam that covers high-performance work systems and a BSOP-326 week 7 case study on Fujiyama Electronics that involves analyzing process data using control charts. The document provides an overview of the content covered in the tutorials purchased from the tutorial website.
PSYCH 625 MENTOR Become Exceptional--psych625mentor.comshanaabe77
FOR MORE CLASSES VISIT
www.psych625mentor.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
This document contains discussion questions and assignments for multiple weeks of a quality management course. It includes questions about total quality management philosophies and tools, customer focus, statistical process control, and implementing quality systems. It also contains a case study assignment on using control charts to analyze variation in circuit board drilling measurements from a supplier. Students are asked to calculate control limits, create X-Bar and R charts, identify out-of-control points, recalculate with their removal, and discuss the changes between the original and updated control charts.
This document contains summaries of tutorials purchased from www.tutorialrank.com for various courses. It includes summaries of discussion questions for BSOP 326 weeks 1-7 that cover topics like total quality management, quality philosophies and standards, statistical tools, and implementing TQM. It also includes summaries of a BSOP-326 week 4 midterm exam that covers high-performance work systems and a BSOP-326 week 7 case study on Fujiyama Electronics that involves analyzing process data using control charts. The document provides an overview of the content covered in the tutorials purchased from the tutorial website.
PSYCH 625 MENTOR Become Exceptional--psych625mentor.comshanaabe77
FOR MORE CLASSES VISIT
www.psych625mentor.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
For more course tutorials visit
www.tutorialrank.com
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
CIS 510 Week 7 Assignment 3 Creating a Domain Model Class Diagram (2 Papers)
CIS 510 Week 9 Assignment 4 Diversity of Approaches (2 Papers)
CIS 510 Week 10 Technical Paper Final Project Plan (2 Papers)
This document provides a final project report for the re-design of arthritis hand tools. It includes sections on project planning, customer research through surveys, defining design objectives and requirements, concept generation and selection, embodiment design, detailed design, material selection, and cost analysis. The goal of the project was to design multifunctional, reliable, interchangeable, and comfortable hand tools to assist people suffering from arthritis in performing daily activities. Customer needs were identified through surveys of arthritis patients. Various concept ideas were generated, evaluated, and a final concept was selected to meet the design requirements. Detailed parametric designs including drawings, analysis, material selection, and costs were developed for the final proposed arthritis hand tool design.
cis 510 Life of the Mind/newtonhelp.com bellflower6
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
Embodiment design or preliminary design is the phase where the design concept is given physical form. It involves three main activities: product architecture, configuration design, and parametric design. Product architecture determines the arrangement of physical elements into modules. Configuration design focuses on special-purpose parts and standard components. Parametric design sets exact dimensions and tolerances. System modeling and functional modeling help structure the design problem and identify inputs and outputs. Tools like FAST and subtract-and-operate are used to develop the functional decomposition of the design. Simulation allows testing designs virtually before validation.
7 QC Tools PDF | An eBook with A Detailed Description and Practical ExamplesShakehand with Life
The document describes a book about 7 quality control tools. It includes an introduction to each of the 7 tools: process flow diagram, check sheet, histogram, Pareto diagram, cause-and-effect diagram, scatter diagram, and control charts. For each tool it provides details on what it is, how to construct it, examples, and how to construct the tool in Microsoft Excel. It also includes an introduction to Kaizen and 5S, practice problems, a test, and answers.
For more course tutorials visit
www.tutorialrank.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
PSYCH 625 Assignment Week 5 Correlation Worksheet (New Syllabus)
PSYCH 625 Assignment Week 6 Chi-Square Worksheet (New Syllabus)
PSYCH 625 Week 2 Statistics Project, Part 1 Opening Data In Microsoft®
Lecture 5 concept appraisal and selectionandibrains
The document discusses several techniques for concept selection and appraisal, including screening concepts against critical requirements, sorting ideas using a concept selection matrix, and using weighted rating methods. It provides an example of evaluating transmission concepts for a go-kart using a concept selection matrix and weighted rating method. Key criteria like efficiency, reliability, cost, and weight are identified and concepts like gears, V-belt, and chain are rated and scored based on the criteria. The highest scoring concept is considered the strongest design.
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
For more classes visit
www.snaptutorial.com
CIS 348 Week 1 Discussion
"Characteristics of Failing Projects" Please respond to the following:
Read the computer world article titled, “Detecting Disaster Projects”. Next, defend three (3) of the twelve (12) characteristics of disaster projects offered by
PSYCH 625 Effective Communication - snaptutorial.comdonaldzs41
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting/mechanics.
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting and mechanics.
GG Freightways (GGFRT) IT Decision Paper AssignmentBefore you be.docxshericehewat
GG Freightways (GGFRT) IT Decision Paper Assignment
Before you begin this assignment, be sure you have read the “GG Freightways Case Study,” any feedback on your proposed IT project from your ITSP Part 2 assignment, and the previously assigned course materials.
Purpose of this Assignment
This assignment gives you the opportunity to apply the course concepts to develop an IT Decision Paper to explain and defend an IT project at GG Freightways (GGFRT). This assignment specifically addresses the following course outcomes to enable you to:
· Apply best practices in information technology management and governance to make, defend, and justify an IT decision.
IT Decision Paper for Your Proposed IT Project
For your ITSP, Part 2, you proposed an IT project for GGFRT. Lance, the CIO at GGFRT, has asked you to write an IT Decision Paper to explain your proposed project. He wants to use the Paper to gain approval from the Governance Board to move forward with the project. This assignment uses a format for a Decision Paper that has been tailored to the course material covered in this class. You may work for an organization that has a format for IT decision papers, and it would be a good idea for you to look at it, but it will likely be structured a little differently from this one. Each organization develops tools and techniques that will work for them.
Assignment
You will develop an IT Decision Paper, using the outline below. Each of the topics to be included in your outline is covered in the course content readings assigned thus far. In addition to the course materials, at least one external resource (resource other than those provided in the class) must be used. Two or more cited references will earn top credit. Use a separate References page to list just the references you have cited. Remember to use the APA formatting rules and correctly cite and reference your sources with APA format. Use the Grading Rubric to be sure you have covered everything.
Please use this outline to build your IT Decision Paper. Use the numbering and headings shown below.
1. Project Description – In two or three sentences:
(1) describe the IT project you proposed for GGFRT in Part 2 of your ITSP.
(2) Describe what major function(s) the system would perform and who would use it. (Do not provide a technical description with hardware, software, etc.)
2. Strategic Alignment – In a short paragraph:
(1) explain how the proposed project aligns to the business strategic objectives in Part 1 of your ITSP, and,
(2) how the proposed project aligns to the IT strategies in Part 2 of your ITSP.
Your proposed project must be aligned directly with at least one business strategic objective and one IT strategy shown in your ITSP.
3. IT Portfolio Roadmap Alignment – In a short paragraph:
(1) Briefly explain where this project fits into the IT Portfolio Roadmap you included in Part 2 of your ITSP.
(2) What functional area does it support?
(3) W ...
OPS 571 Effective Communication - tutorialrank.comBartholomew54
For more course tutorials visit
www.tutorialrank.com
a. Observe the critical path diagram. Why are there two arrows pointing to task F?
b. Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days
OPS 571 Social Responsibility - snaptutorial.comDavisMurphyA94
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days?our readers.
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days?our readers.
Case Study 9.2 – Drug Testing Question (500 words minimum) Wh.docxketurahhazelhurst
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“What argument would you use, for or against a decision by the employer in this case to insist on expanding the drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own time? Support your answer.
Case Study 10.2 Unfair Labor Practice By a Union
Question: (500 words minimum):
“How could the union have stopped individuals from the intimidating actions that allegedly went on in this case? Support your answer.”
Grading Criteria
Grading Criteria: 500 Word Min.
Your response to the discussion question(s) must be tied back to the chapter material (Case Study) and outside research is expected. When I ask you to support your answer, you are expected to combine opinion with, minimum 2, citations (Always cite your sources utilizing APA 6th Edition format), insight from your experiences, observations of others experiences, analysis of the facts/information and a conclusion. PLEASE do not limit your citations to just the book! Find other supporting material outside of the class structure
Case Study 9
.2
–
Drug
Testing
Question: (
500 words minimum
)
:
“
What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to
include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“ What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
IT 328 Milestone Two Guidelines and Rubric
Your Role and the Triple Constraint
Overview: In Milestone One, you began your progress toward successful completion of your final project, the risk analysis and mitigation memo. You will now
continue this preparatory work in Milestone Two by focusing on a technical role. You will consider how the tasks assigned to the role fit into an integrated
schedule found in a Gantt chart. You will then work with the triple constraint, showing how changes to it may impact the project, while proposing a new project
element that will enhance user experience with the student degree progress tool. It is important to note that this milestone addresses Section I, Parts C and D of
your final project. For purposes of this activity, these items have been further broken down than they are in the final version of your project; this will help guide
you through all the aspects of this point in your learning experience.
As you are beginning to see, working within project budgets and staying on schedule typically requires a team effort, as work tasks must be completed efficiently
and often in the correct order for the project to stay on track. Additions to the p ...
Financial Statement Analysis
Ratio Analysis Example
Prufrock Corporation
Balance Sheet as of December 31,2008
($ in millions)
Assets
Liabilities and Owners' Equity
Current assets
Current liabilities
Cash
$98
Accounts payable
$344
Accounts receivable
$188
Notes payable
$196
Inventory
$422
Total
$540
Total
$708
Long-term debt
$457
Fixed assets
Owners' equity
Net plant and equipment
$2,880
Common stock and paid-in surplus
$550
Total assets
$3,588
Retained earnings
$2,041
Total
$2,591
Total liabilities and owners' equity
$3,588
Prufrock Corporation
2008 Income Statement
($ in millions)
Sales
2311
Cost of goods sold
1344
Depreciation
276
Earnings before interest and taxes
691
Interest paid
141
Taxable income
550
Taxes (34%)
187
Net income
363
Dividends
121
Addition to retained earnings
242
*Create common size balance sheet and common size income statement.
*Calculate ratios for Prufrock Corporation
Short-term solvency or liquidity ratios
Liquidity ratio measures the firm’s ability to pay its bills over the short run without undue stress.
Current ratio=
*Do we have enough short-term liquid assets to cover our short-term debts?
Quick ratio (acid test ratio) =
*Do we have enough really liquid short-term assets to cover our short-term debts?
Long-term solvency, or financial leverage, ratios
Leverage ratio measures the form’s long-run ability to meet its obligations.
Total debt ratio=
What percentage of total assets is financed with either short- or long-term debt?
Debt-equity ratio=
Times interest earned=
* It measures how well a company has its interest obligations covered. Are we generating enough income to make out interest payments?
Asset management or turnover ratios
Turnover ratios measure asset use efficiency.
Inventory turnover=
*On average, how many times per year do we go through our inventory? (Excess inventory is expensive!)
Day’s sales Outstanding=
Fixed Assets Turnover Ratio=
Total Assets Turnover Ratio=
Profitability ratios
Operating margin=
Profit margin=
Return on assets (ROA) =
*What is profit per dollar of asset?
Return on equity (ROE) =
*What is the rate of return for stockholders?
Return on equity (ROE) = Profit margin * Total asset turnover * Equity multiplier
Market value ratios
(We assume that Prufrock has 33 million shares outstanding and stock sold for $88 per share at the end of the year.)
EPS=
Price-earnings ratio=
Market-to-book ratio=
4-1
Running head: FULL TITLE OF YOUR PAPER IN CAPS ON ONE LINE1
ABBREVIATED TITLE OF YOUR PAPER 2
Team Paper: Sources of and solutions to conflict in a virtual environment
PJM6210 Communication Skills for Project Managers
Month, day, year
Sources of Conflict in a Virtual Environment
Interpersonal Conflict 🡪 Jones
In the second paragraph, begin addressing your first topic or question. This should directly align to what you stated you were going to talk about in the first se ..
For more course tutorials visit
www.tutorialrank.com
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
CIS 510 Week 7 Assignment 3 Creating a Domain Model Class Diagram (2 Papers)
CIS 510 Week 9 Assignment 4 Diversity of Approaches (2 Papers)
CIS 510 Week 10 Technical Paper Final Project Plan (2 Papers)
This document provides a final project report for the re-design of arthritis hand tools. It includes sections on project planning, customer research through surveys, defining design objectives and requirements, concept generation and selection, embodiment design, detailed design, material selection, and cost analysis. The goal of the project was to design multifunctional, reliable, interchangeable, and comfortable hand tools to assist people suffering from arthritis in performing daily activities. Customer needs were identified through surveys of arthritis patients. Various concept ideas were generated, evaluated, and a final concept was selected to meet the design requirements. Detailed parametric designs including drawings, analysis, material selection, and costs were developed for the final proposed arthritis hand tool design.
cis 510 Life of the Mind/newtonhelp.com bellflower6
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
Embodiment design or preliminary design is the phase where the design concept is given physical form. It involves three main activities: product architecture, configuration design, and parametric design. Product architecture determines the arrangement of physical elements into modules. Configuration design focuses on special-purpose parts and standard components. Parametric design sets exact dimensions and tolerances. System modeling and functional modeling help structure the design problem and identify inputs and outputs. Tools like FAST and subtract-and-operate are used to develop the functional decomposition of the design. Simulation allows testing designs virtually before validation.
7 QC Tools PDF | An eBook with A Detailed Description and Practical ExamplesShakehand with Life
The document describes a book about 7 quality control tools. It includes an introduction to each of the 7 tools: process flow diagram, check sheet, histogram, Pareto diagram, cause-and-effect diagram, scatter diagram, and control charts. For each tool it provides details on what it is, how to construct it, examples, and how to construct the tool in Microsoft Excel. It also includes an introduction to Kaizen and 5S, practice problems, a test, and answers.
For more course tutorials visit
www.tutorialrank.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
For more course tutorials visit
www.newtonhelp.com
This Tutorial contains 2 Papers for each Assignment
CIS 510 Week 2 Assignment 1 Error Handling in an Activity Diagram (2 Papers)
CIS 510 Week 4 Assignment 2 Assignment 2 Creating a Use Case (2 Papers)
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
PSYCH 625 Assignment Week 5 Correlation Worksheet (New Syllabus)
PSYCH 625 Assignment Week 6 Chi-Square Worksheet (New Syllabus)
PSYCH 625 Week 2 Statistics Project, Part 1 Opening Data In Microsoft®
Lecture 5 concept appraisal and selectionandibrains
The document discusses several techniques for concept selection and appraisal, including screening concepts against critical requirements, sorting ideas using a concept selection matrix, and using weighted rating methods. It provides an example of evaluating transmission concepts for a go-kart using a concept selection matrix and weighted rating method. Key criteria like efficiency, reliability, cost, and weight are identified and concepts like gears, V-belt, and chain are rated and scored based on the criteria. The highest scoring concept is considered the strongest design.
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
PSYCH 625 Assignment Week 3 Identifying Statistical Tests in the Literature Worksheet (New Syllabus)
PSYCH 625 Assignment Week 4 Comparing Means Worksheet (New Syllabus)
For more classes visit
www.snaptutorial.com
CIS 348 Week 1 Discussion
"Characteristics of Failing Projects" Please respond to the following:
Read the computer world article titled, “Detecting Disaster Projects”. Next, defend three (3) of the twelve (12) characteristics of disaster projects offered by
PSYCH 625 Effective Communication - snaptutorial.comdonaldzs41
For more classes visit
www.snaptutorial.com
PSYCH 625 Assignment Week 1 Descriptive and Inferential Statistics Worksheet (New Syllabus)
PSYCH 625 Assignment Week 2 Probability and Statistical Analysis Worksheet (New Syllabus)
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting/mechanics.
326 week 7 fujiyama electronics case studyhwcampusinfo
This document provides instructions for a case study assignment on process control charts for Fujiyama Electronics. Students are asked to:
1. Create X-Bar and R control charts using data provided to identify any out-of-control conditions.
2. Recalculate the charts after removing assignable causes, and discuss the differences between the original and updated charts.
3. Submit the case study in APA format in a Word document. The study will be graded based on the accuracy of the control charts, discussion of differences between charts, and paper formatting and mechanics.
GG Freightways (GGFRT) IT Decision Paper AssignmentBefore you be.docxshericehewat
GG Freightways (GGFRT) IT Decision Paper Assignment
Before you begin this assignment, be sure you have read the “GG Freightways Case Study,” any feedback on your proposed IT project from your ITSP Part 2 assignment, and the previously assigned course materials.
Purpose of this Assignment
This assignment gives you the opportunity to apply the course concepts to develop an IT Decision Paper to explain and defend an IT project at GG Freightways (GGFRT). This assignment specifically addresses the following course outcomes to enable you to:
· Apply best practices in information technology management and governance to make, defend, and justify an IT decision.
IT Decision Paper for Your Proposed IT Project
For your ITSP, Part 2, you proposed an IT project for GGFRT. Lance, the CIO at GGFRT, has asked you to write an IT Decision Paper to explain your proposed project. He wants to use the Paper to gain approval from the Governance Board to move forward with the project. This assignment uses a format for a Decision Paper that has been tailored to the course material covered in this class. You may work for an organization that has a format for IT decision papers, and it would be a good idea for you to look at it, but it will likely be structured a little differently from this one. Each organization develops tools and techniques that will work for them.
Assignment
You will develop an IT Decision Paper, using the outline below. Each of the topics to be included in your outline is covered in the course content readings assigned thus far. In addition to the course materials, at least one external resource (resource other than those provided in the class) must be used. Two or more cited references will earn top credit. Use a separate References page to list just the references you have cited. Remember to use the APA formatting rules and correctly cite and reference your sources with APA format. Use the Grading Rubric to be sure you have covered everything.
Please use this outline to build your IT Decision Paper. Use the numbering and headings shown below.
1. Project Description – In two or three sentences:
(1) describe the IT project you proposed for GGFRT in Part 2 of your ITSP.
(2) Describe what major function(s) the system would perform and who would use it. (Do not provide a technical description with hardware, software, etc.)
2. Strategic Alignment – In a short paragraph:
(1) explain how the proposed project aligns to the business strategic objectives in Part 1 of your ITSP, and,
(2) how the proposed project aligns to the IT strategies in Part 2 of your ITSP.
Your proposed project must be aligned directly with at least one business strategic objective and one IT strategy shown in your ITSP.
3. IT Portfolio Roadmap Alignment – In a short paragraph:
(1) Briefly explain where this project fits into the IT Portfolio Roadmap you included in Part 2 of your ITSP.
(2) What functional area does it support?
(3) W ...
OPS 571 Effective Communication - tutorialrank.comBartholomew54
For more course tutorials visit
www.tutorialrank.com
a. Observe the critical path diagram. Why are there two arrows pointing to task F?
b. Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days
OPS 571 Social Responsibility - snaptutorial.comDavisMurphyA94
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days?our readers.
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead of 2days?our readers.
Case Study 9.2 – Drug Testing Question (500 words minimum) Wh.docxketurahhazelhurst
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“What argument would you use, for or against a decision by the employer in this case to insist on expanding the drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own time? Support your answer.
Case Study 10.2 Unfair Labor Practice By a Union
Question: (500 words minimum):
“How could the union have stopped individuals from the intimidating actions that allegedly went on in this case? Support your answer.”
Grading Criteria
Grading Criteria: 500 Word Min.
Your response to the discussion question(s) must be tied back to the chapter material (Case Study) and outside research is expected. When I ask you to support your answer, you are expected to combine opinion with, minimum 2, citations (Always cite your sources utilizing APA 6th Edition format), insight from your experiences, observations of others experiences, analysis of the facts/information and a conclusion. PLEASE do not limit your citations to just the book! Find other supporting material outside of the class structure
Case Study 9
.2
–
Drug
Testing
Question: (
500 words minimum
)
:
“
What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to
include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
Case Study 9.2 – Drug Testing
Question: (500 words minimum):
“ What argument would you use, for or against a decision by the employer in this case to insist on expanding the
drug program to include prohibition of the sale, possession, or use of illegal substances on the employee’s own
time? Support your answer.
IT 328 Milestone Two Guidelines and Rubric
Your Role and the Triple Constraint
Overview: In Milestone One, you began your progress toward successful completion of your final project, the risk analysis and mitigation memo. You will now
continue this preparatory work in Milestone Two by focusing on a technical role. You will consider how the tasks assigned to the role fit into an integrated
schedule found in a Gantt chart. You will then work with the triple constraint, showing how changes to it may impact the project, while proposing a new project
element that will enhance user experience with the student degree progress tool. It is important to note that this milestone addresses Section I, Parts C and D of
your final project. For purposes of this activity, these items have been further broken down than they are in the final version of your project; this will help guide
you through all the aspects of this point in your learning experience.
As you are beginning to see, working within project budgets and staying on schedule typically requires a team effort, as work tasks must be completed efficiently
and often in the correct order for the project to stay on track. Additions to the p ...
Financial Statement Analysis
Ratio Analysis Example
Prufrock Corporation
Balance Sheet as of December 31,2008
($ in millions)
Assets
Liabilities and Owners' Equity
Current assets
Current liabilities
Cash
$98
Accounts payable
$344
Accounts receivable
$188
Notes payable
$196
Inventory
$422
Total
$540
Total
$708
Long-term debt
$457
Fixed assets
Owners' equity
Net plant and equipment
$2,880
Common stock and paid-in surplus
$550
Total assets
$3,588
Retained earnings
$2,041
Total
$2,591
Total liabilities and owners' equity
$3,588
Prufrock Corporation
2008 Income Statement
($ in millions)
Sales
2311
Cost of goods sold
1344
Depreciation
276
Earnings before interest and taxes
691
Interest paid
141
Taxable income
550
Taxes (34%)
187
Net income
363
Dividends
121
Addition to retained earnings
242
*Create common size balance sheet and common size income statement.
*Calculate ratios for Prufrock Corporation
Short-term solvency or liquidity ratios
Liquidity ratio measures the firm’s ability to pay its bills over the short run without undue stress.
Current ratio=
*Do we have enough short-term liquid assets to cover our short-term debts?
Quick ratio (acid test ratio) =
*Do we have enough really liquid short-term assets to cover our short-term debts?
Long-term solvency, or financial leverage, ratios
Leverage ratio measures the form’s long-run ability to meet its obligations.
Total debt ratio=
What percentage of total assets is financed with either short- or long-term debt?
Debt-equity ratio=
Times interest earned=
* It measures how well a company has its interest obligations covered. Are we generating enough income to make out interest payments?
Asset management or turnover ratios
Turnover ratios measure asset use efficiency.
Inventory turnover=
*On average, how many times per year do we go through our inventory? (Excess inventory is expensive!)
Day’s sales Outstanding=
Fixed Assets Turnover Ratio=
Total Assets Turnover Ratio=
Profitability ratios
Operating margin=
Profit margin=
Return on assets (ROA) =
*What is profit per dollar of asset?
Return on equity (ROE) =
*What is the rate of return for stockholders?
Return on equity (ROE) = Profit margin * Total asset turnover * Equity multiplier
Market value ratios
(We assume that Prufrock has 33 million shares outstanding and stock sold for $88 per share at the end of the year.)
EPS=
Price-earnings ratio=
Market-to-book ratio=
4-1
Running head: FULL TITLE OF YOUR PAPER IN CAPS ON ONE LINE1
ABBREVIATED TITLE OF YOUR PAPER 2
Team Paper: Sources of and solutions to conflict in a virtual environment
PJM6210 Communication Skills for Project Managers
Month, day, year
Sources of Conflict in a Virtual Environment
Interpersonal Conflict 🡪 Jones
In the second paragraph, begin addressing your first topic or question. This should directly align to what you stated you were going to talk about in the first se ..
For more course tutorials visit
www.newtonhelp.com
This Tutorial included All DQs, 2 Course Project, 2 Case Analysis for Week 3 and Two Case Analysis for Week 6, Two Week 4 Brics and Mitsk Project (Scroll down to see all included tutorials)
Communications exampleStakeholder NameRoleInformationTimeframeMediaResponsible for UpdatesResponsible for DeliveryCarol AndersonProject SponsorSummary project status1st each monthe-mailTeamJames White (PM)Critical risks and issuesWeeklyDashboardJames White (PM)James White (PM)Budget & timeline performance1st each monthDashboardJames White (PM)James White (PM)James WhiteProject ManagerDetailed project statusWeeklyTeam status systemTeanTeam status systemAll risks and issuesWeeklyTeam status systemTeamTeam status systemResource, supplier, procurement budget & timeline performancee/o weeke-mailTeamFinance MatrixSam DeanSafety AuditorLevel of safety compliance of all deliverables produced1st each month1st each monthQuality ManagerQuality Manager
AMBERTON UNIVERSITY
MGT6220
Managing the Global Workforce
Dr. Di Ann Sanchez, SPHR, SHRM-SCP
ASSIGNMENTS
All assignments should be submitted in Microsoft Word using a 12 pt. Font size and formatted as
double-spaced using Times New Roman. Each of the Assignments has been divided into specific
questions with the suggested completion order. However, all the questions in Assignment One will
be submitted together by the due date and so forth. Only one Assignment will be submitted at a time.
Assignments may be submitted early so you can work around other scheduling issues; however, they
will not be graded until after the official due date. Once one Assignment has been graded and
returned to you, another may be submitted. All Assignments are to be of graduate-level quality and
will be graded accordingly.
ORIENTATION TO CLASS AND TEXT REVIEW – DUE SEE MOODLE AND SYLLABI
(11:30 pm CST). POST AN INTRODUCTION OF YOURSELF FOLLOWING THE
OUTLINE BELOW (DISCUSSION AND PARTICIPATION – 2.5 pts.)
Discussion Forum Assignment: Access the Discussion Forum for the class and post a Welcome
Introduction to your Classmates. Include such things as highlighted below.
Enrollment Assignment:
Your posting to the class should include the following:
Your Name
Your Occupation
Your Field of Study
What State do you live in?
How long have you been a student at Amberton University?
Why are you interested in this topic?
What is your learning style? MBTI
What do you hope to achieve at the end of this course?
Your expectations of Professor Sanchez
I have been in the Moodle Platform and have downloaded AND READ the Syllabus, Study
Guide, Assignments, and Reference Materials. I understand that all Assignments are due by
11:30 pm CST on the due dates.
Assignment Guidelines:
When completing assignments, please identify the question to which you are responding by retyping
the question. While retyping the question is not a typical APA style, it will assure that I see your
complete response. The following orientation should be submitted first to verify that students can
submit readable attached files and post information in the Disc ...
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-
The document discusses the systems development life cycle (SDLC) process for planning, creating, testing, and deploying information systems. It describes the main stages of the SDLC as preliminary analysis, systems analysis, systems design, development, integration and testing, acceptance and deployment, maintenance, and evaluation. It also discusses problems with the traditional sequential SDLC model such as long development cycles and difficulty accommodating changes. The incremental waterfall model is presented as an alternative that develops the system in smaller incremental releases.
QSO 510 Final Project Guidelines and Rubric Overview .docxmakdul
QSO 510 Final Project Guidelines and Rubric
Overview
The final project for this course is the creation of a statistical analysis report.
Each day, operations management professionals are faced with multiple decisions affecting various aspects of the operation. The ability to use data to drive
decisions is an essential skill that is useful in any facet of an operation. The dynamic environment offers daily challenges that require the talents of the operations
manager; working in this field is exciting and rewarding.
Throughout the course, you will be engaged in activities that charge you with making decisions regarding inventory management, production capacity, product
profitability, equipment effectiveness, and supply chain management. These are just a few of the challenges encountered in the field of operations management.
The final activity in this course will provide you with the opportunity to demonstrate your ability to apply statistical tools and methods to solve a problem in a
given scenario that is often encountered by an operations manager. Once you have outlined your analysis strategy and analyzed your data, you will then report
your data, strategy, and overall decision that addresses the given problem.
The project is divided into two milestones, which will be submitted at various points throughout the course to scaffold learning and ensure quality final
submissions. These milestones will be submitted in Modules Three and Seven. The final project is due in Module Nine.
In this assignment, you will demonstrate your mastery of the following course outcomes:
Apply data-based strategies in guiding a focused approach for improving operational processes
Determine the appropriate statistical methods for informing valid data-driven decision making in professional settings
Select statistical tools for guiding data-driven decision making resulting in sustainable operational processes
Utilize a structured approach for data-driven decision making for fostering continuous improvement activities
Propose operational improvement recommendations to internal and external stakeholders based on relevant data
Prompt
Operations management professionals are often relied upon to make decisions regarding operational processes. Those who utilize a data-driven, structured
approach have a clear advantage over those offering decisions based solely on intuition. You will be provided with a scenario often encountered by an operations
manager. Your task is to review the “A-Cat Corp.: Forecasting” scenario, the addendum, and the accompanying data in the case scenario and addendum; outline
the appropriate analysis strategy; select a suitable statistical tool; and use data analysis to ultimately drive the decision. Once this has been completed, you will
be challenged to present your data, data analysis strategy, and overall decision in a concise report, justifying your analysis.
Specifically, the ...
PSYC 499Case Study 1 Grading RubricStudentCriteriaPoint.docxpotmanandrea
PSYC 499
Case Study 1 Grading Rubric
Student:
Criteria
Points Possible
Points Earned
Instructor’s Comments
Content
· A comprehensive introduction is provided.
· Sufficient background information is contained.
· A brief theoretical explanation is provided.
· A treatment plan is identified.
· Summary and conclusions are thorough.
50
Readability
· Spelling and grammar are correct.
· Sentences are complete, clear, and concise.
· The flow of the paper is well-structured.
· Your ability to communicate clearly and effectively about a specific case is demonstrated.
20
Format and Logistics
· The paper demonstrates your knowledge of the “language” of the field (current APA).
· The paper is 3–4 pages.
· Case Study 1 was submitted on time.
20
Total
90
OL 325 Milestone One Guidelines and Rubric
The Strategic Analysis
The development of a strategic analysis guides all decisions made regarding your compensation systems throughout the project. The strategic analysis reveals
firm-specific challenges, objectives, and initiatives that allow you to align the goals of a compensation system effectively with those of the company strategy.
The strategic analysis allows you to better understand the external market challenges e-sonic faces in addition to its internal capabilities. As a consultant, a
thorough understanding of e-sonic’s business environment allows you to better align your competitive system design with e-sonic’s goals, challenges, and
objectives. Follow the outline below when completing this portion of the project.
Strategic Analysis Outline:
1. Executive Summary (Concisely conveys the project objectives and main findings. The executive summary is completed last, but included first in the
strategic analysis.)
2. Strategic Analysis
a) Identification of e-sonic’s industry based on the North American Industry Classification System (NAICS)
b) Analysis of e-sonic’s external market environment
i. Industry Profile
ii. Competition
iii. Foreign Demand
iv. Long-Term Industry Prospects
v. Labor-Market Assessment
c) Analysis of Internal Capabilities
i. Functional Capabilities
ii. Human Resource Capabilities
The Strategic Analysis section is fully described in the MyManagementLab Building Strategic Compensation Systems casebook for faculty and students, linked in
the MyLab course menu. Follow the explanations and outline to complete this milestone. The Strategic Analysis section is due at the end of Module Three.
Rubric
Requirements of submission: Each section of the final project must follow these formatting guidelines: 5–7 pages, double spacing, 12-point Times New Roman
font, one-inch margins, and discipline-appropriate citations.
Critical Elements Exemplary (100%) Proficient (85%) Needs Improvement (55%) Not Evident (0%) Value
The Strategic
Analysis
Provides in-depth analysis that
includes an executive summary
and the strategic analysis with
all of the elements of the
outlines ...
For more classes visit
www.snaptutorial.com
Observe the critical path diagram. Why are there two arrows pointing to task F?
Why is the critical path shown as A-B-E-G-I? How is the critical path defined?
What would happen if activity F was revised to take 4 days instead
EEE/CSE 120
Answer Sheet
Capstone Design Project
Name:__________________________
Instructor:__________________________
Class Time:________________________
Date:________________________
Task 4-1: Design of Synchronous Sequential Machines
Design #1 (Mealy machine)
: What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #1 (Mealy machine) here:
Design #2 (Moore machine): What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #2 (Moore machine) here:
Task 4-2: Simulate Both Designs in the Lab in Presence of the TA
Demonstrate that both of your circuits meet the completed design specification to the laboratory assistants and have the TAs apply a grade here.
Grade: 1st Design ____/15 Grade: 2nd Design____/15
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
Using the guidelines in the laboratory manual, list your criteria and associated weights here:
Criteria
Weight
Task 4-4: Apply the Criteria to Pick the Best Design
Describe how you applied the criteria and weighting system in the above task to pick the best design.
Which design is better based on your criteria and weighting system?
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
Demonstrate to a laboratory assistant that one of your designs works according to your completed specification.
Laboratory assistant evaluation:
Capstone Design Project: Lab Report Grade Sheet
Name:
Instructor Assessment:
Grading Criteria
Max Points
Points lost
Template
Neatness, Clarity, and Concision
5
Description of Assigned Tasks, Work Performed & Outcomes Met
Task 4-1: Design of Synchronous Sequential Machines
22
Task 4-2: Simulate Both Designs
30
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
5
Task 4-4: Apply the Criteria to Pick the Best Design
8
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
30
Self-Assessment Worksheet (The content of the self-assessment worksheet will not be graded. Full credit is given for including the completed worksheet.)
(2 extra points)
Points .
Similar to BSOP 326 Education Specialist / snaptutorial.com (17)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.pptHenry Hollis
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
How Barcodes Can Be Leveraged Within Odoo 17Celine George
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
1. BSOP 326 Week 1-7 All Discussion Questions
For more classes visit
www.snaptutorial.com
WEEK 1DQ 1 What is Total Quality Management
WEEK 1DQ 2 A System Perspective
WEEK 2DQ 1Dr. Deming's 14 Points
WEEK 2DQ 2 Quality Philosophies, Awards, and Standards
WEEK 3DQ 1 TQM Leaders
WEEK 3DQ 2 Who is the Customer
WEEK 4DQ 1 TQM & Teams
WEEK 4DQ 2 Employee Involvement
WEEK 5DQ 1 Cost of Quality
WEEK 5DQ 2 Supplier Relationships
WEEK 6DQ 1 Statistical Tools
WEEK 6DQ 2 Inspection & Process Evalutions
WEEK 7DQ 1 Implementing TQM
WEEK 7DQ 2 What is Six Sigma
********************************************
2. BSOP 326 Week 4 High-Performance Work
Systems – Midterm
For more classes visit
www.snaptutorial.com
1. (TCO 6) An effective leadership system is designed to accomplish
all of the following, except _____. (Points : 5)
2. (TCO 6) The traditional approach to strategy deployment is which
of the following? (Points : 5)
3. (TCO 3) The criteria for the Canadian Awards for Excellence are
most similar to which of the following? (Points : 5)
4. (TCO 3) ISO 9001 provides specific requirements for _____.
(Points : 5)
5. (TCO 1) A consumer purchases a generic product at a cost of $5.00
instead of the competing brand-name product that sells for $7.00. The
consumer feels that there is no difference in quality between the
generic and brand-name products. This scenario illustrates which of
the following definitions of quality? (Points : 5)
6. (TCO 1) During the Middle Ages, quality was built into the final
product. This approach to quality was lost with the advent of _____.
(Points : 5)
7. (TCO 1) Which of the following was the top priority of U.S.
manufacturing in the time period immediately following World War
II? (Points : 5)
3. 8. (TCO 2) Which of the following systems does not have a role to
play in assuring quality in a manufacturing firm? (Points : 5)
9. (TCO 2) An increasingly important component in quality for
service firms is _____. (Points : 5)
10. (TCO 2) Services are generally _____ intensive, whereas
manufacturing is more _____ intensive. (Points : 5)
11. (TCO 2) Systems thinking can be applied to the analysis of _____.
(Points : 5)
12. (TCO 3) The Malcolm Baldrige National Quality Award serves
several purposes, except _____. (Points : 5)
13. (TCO 5) “Moments of truth” are instances when which of the
following occurs? (Points : 5)
14. (TCO 5) Which of the following is not true about the American
Customer Satisfaction Index? (Points : 5)
15. (TCO 7) Which of the following is not considered a “hard”
measure of the effectiveness of human-resource management? (Points
: 5)
16. (TCO 4) Which of the following is the primary reason for
Deming’s position that slogans should be eliminated? (Points : 5)
17. (TCO 4) The Deming philosophy focuses on improvements in
product and service quality by _____. (Points : 5)
18. (TCO 8) The key stages of a team’s life cycle include all of the
following, except for _____. (Points : 5)
Top of Form
Page 2
4. 1. (TCO 4) Failure to understand Deming’s Profound Knowledge can
result in some severe problems. Answer the following three parts
relating Peter Scholtes's observations relating to the failure to
understand Deming’s Profound Knowledge:
1. Discuss what happens when people do not understand variation.
(10 points)
2. Discuss what happens when people do not understand systems. (10
points)
3. Discuss what happens when people do not understand psychology.
(10 points)
(Points : 30)
2. (TCO 6) Answer the following three parts relating to the situational
leadership theory:
1. Discuss the leadership style that would be used if maturity level of
the follower was “able and willing.” (10 points)
2. Discuss the leadership style that would be used if maturity level of
the follower was “unable but willing.” (10 points)
3. Discuss the leadership style that would be used if maturity level of
the follower was “able but unwilling.” (10 points)
************************************************
BSOP 326 Week 7 Fujiyama Electronics Case
Study
For more classes visit
www.snaptutorial.com
5. Fujiyama Electronics Case Study - Due Week 7
Objective
This case study looks at the behavior of a circuit board process though
the use of Control Charts. At least two Control Charts will need to be
constructed, and from them you will be asked to provide an
assessment of what you see. A template to facilitate the construction
of the Control Charts has been provided. You are not required to use
this template. A tutorial that outlines the steps for this case is located
in Doc Sharing.
Problem Statement
Fujiyama Electronics, Inc. has had difficulties with circuit boards
purchased from an outside supplier. Unacceptable variability occurs
between two drilled holes that are supposed to be 5 cm apart on the
circuit boards. Thirty samples of four boards each were taken from
shipments from the supplier as shown in the data from the worksheet.
Data in the worksheet below can also be assessed here.
Project Deliverables
The student will submit the completed case study in a Word document
to their Dropbox by the end of class Week 7. The paper is worth 50
points.
The student will complete and/or answer the following questions.
Calculate X-Bar-Bar, R-Bar, and associated control limits using the
data in the table above. Create X-Bar•R (Average & Range) Control
Charts from the data in the table above. Discuss notable out-of-control
conditions displayed in the completed X-Bar•R (Average & Range)
Control Charts. Only consider points outside the control limits. Do
not consider runs, set of points within certain zones, etc. If the
conditions you note could be defined as assignable conditions and
6. they are removed from the process, what will happen to the X-Bar•R
Control Chart?
(a) Remove the data related to the out-of-control points you observed
from the origainal data and recalculate a new X-Bar-Bar, R-Bar, and
associated control limits.
(b) Create new X-Bar•R (Average & Range) Control Charts from
your updated data.
Discuss how the two sets of Control Charts are different. What has
changed?
The format of the case study should conform to the Publication
Manual for the American Psychological Association (APA), 6th
edition, for title page and text. Citations and references are not
required. A basic APA tutorial can be found intheWebliography and a
paper template can be found in Doc Sharing. The completed case
study will be submitted to your Dropbox as an MS Word document.
All graphics and charts will be a part of the Word document and
submitted as a file. Documents authored in other applications such as
WordPerfect or MS Works will not be accepted.
This project is to be accomplished individually, and will reflect the
work of each student. All DeVry University policies are in effect
including the plagiarism policy. Late papers will not be accepted
without prior permission.
Submit your Fujiyama Case Study paper to the Dropbox located on
the silver tab at the top of this page by the end of Week 7. For
instructions on how to use theDropbox, read these Step-by-Step
Instructions or watch this Dropbox Tutorial.
See Syllabus section "Due Dates for Assignments & Exams" for due
date information.
Grading Rubrics
7. First Control Chart (40 Percent)
Points Possible
Points Earned
Comments
All calculations are correct.
5
X-Bar & R charts are presented and correct.
5
All conditions of importance discussed.
10
Total
20
Second Control Chart (40 Percent)
Points Possible
Points Earned
Comments
All calculations are correct.
5
X-Bar & R charts are presented and correct.
8. 5
Differences between the two sets of Control Charts are thoroughly
discussed.
10
Total
20
Mechanics (20 Percent)
Points Possible
Points Earned
Comments:
The paper, including the title page follows APA guidelines for format.
(References and citations not required)
2
Sentences are complete, clear, and concise.
2
The paper is laid out with effective use of headings, font styles, and
white space.
2
Rules of grammar, usage, and punctuation are followed.
2
9. Spelling is correct.
2
Total
10
Total (100 Percent)
Points Possible
Points Earned
Comments:
50
Best Practices
The following are the best practices in preparing this paper. Sample
papers, using the APA format, are located in Doc Sharing. Other
useful information has also been provided there, including an APA
paper template.
Cover Page - Include who you prepared the paper for, who prepared
it, and the date. Body of Your Work - Titles to identify different areas
that you address. State the main ideas, major points in each idea, and
supporting information. Break down each main idea you will use in
the body of your paper. Show some type of division like separate
sections that are labeled, separate groups of paragraphs, or headers.
You would include the information you found during your research
and investigation. Summary and Conclusion - Summarizing is similar
to paraphrasing but presents the gist of the material in fewer words
than the original. An effective summary identifies the main ideas and
10. major support points from the body of your work. Minor details are
left out.
Additional hints on preparing the best possible project. Apply a three-
step process of writing… Plan, Write, and Complete. Prepare an
outline of your research paper before you go forward. Complete a first
draft and then go back to edit, evaluate, and make any changes
required. Use visual communication if it will help clarify and support
your work. Any material that can be removed and not affect the
clarity of your work is essentially filler, and should be avoided. Filler
distracts from the flow of your work and will most likely cause you to
lose points. References - Not required for this case study.
*************************************************
BSOP 330 Entire Course All Discussion
Questions, Lab Assignments, Quiz Case Study
For more classes visit
www.snaptutorial.com
BSOP 330 Master Planning All Weeks Discussion Questions Devry
University
BSOP330 Week 1 Lab Assignment Problems 4.1, 4.5, 4.9 and 4.11,
pages 140-141
BSOP330 Week 2 Lab Assignments Chapter Four Problems 4.23,
4.27, 4.33, and 4.35
BSOP330 Week 2 Southwestern Case study
BSOP330 Week 3 Lab Assignments Chapter 13 problems 13.3, 13.5,
13.9, 13.21
11. BSOP330 Week 4 Lab Assignments Chapter 12, problems 12.1, 12.5,
12.9, 12.15
BSOP330 Week 4 Quiz
BSOP330 Week 4 Southwestern Case study Printing companies
Programs and Inserts
BSOP330 Week 5 Homework Problems Mater Production Schedule
Problem 1, 2 and 3
BSOP330 Week 5 Quiz
BSOP330 Week 6 Lab Assignments Chapter 14, problems 14.1, 14.3,
14.9, 14.13
BSOP330 Week 7 Case Study Final
BSOP330 Week 7 Lab Assignments Chapter 16, problems 16.1, 16.3,
16.5, and 16.9 (pages 640-641)
BSOP330 Week 7 Quiz
***********************************************
BSOP 330 Master Planning All Weeks
Discussion Questions
For more classes visit
www.snaptutorial.com
BSOP-330 Master Planning All Weeks Discussion Questions Devry
University
************************************************
12. BSOP 330 Week 1 Lab Assignment Problems
4.1, 4.5, 4.9 and 4.11, pages 140-141
For more classes visit
www.snaptutorial.com
Problems: 4.1, 4.5, 4.9 and 4.11, pages 140-141.
Problems: 4.1: The following gives the number of pints of type A
blood used at Woodlawn Hospital in the past 6 weeks:
a) Forecast the demand for the week of October 12 using a 3-week
moving average.
b) Use a 3-week weighted moving average, with weights of .1, .3, and
.6, using .6 for the most recent week. Forecast demand for the week of
October 12.
c) Compute the forecast for the week of October 12 using exponential
smoothing with a forecast for August 31 of 360 and α = .2.
Problems: 4.5: The Carbondale Hospital is considering the purchase
of a new ambulance. The decision will rest partly on the anticipated
mileage to be driven next year. The miles driven during the past 5
years are as follows:
Year Mileage
1 3,000
2 4,000
3 3,400
13. 4 3,800
5 3,700
a) Forecast the mileage for next year using a 2-year moving average.
b) Find the MAD based on the 2-year moving average forecast in part
(a).(Hint: You will have only 3 years of matched data.)
c) Use a weighted 2-year moving average with weights of .4 and .6 to
forecast next year’s mileage. (The weight of .6 is for the most recent
year.) What MAD results from using this approach to forecasting?
(Hint: You will have only 3 years of matched data.)
d) Compute the forecast for year 6 using exponential smoothing, an
initial forecast for year 1 of 3,000 miles, and α = .5
Problems: 4.9: Dell uses the CR5 chip in some of its laptop
computers. The prices for the chip during the past 12 months were as
follows:
a) Use a 2-month moving average on all the data and plot the averages
and the prices
b) Use a 3-month moving average and add the 3-month plot to the
graph created in part (a).
c) Which is better (using the mean absolute deviation): the 2-month
average or the 3-month average?
d) d) Compute the forecasts for each month using exponential
smoothing, with an initial forecast for January of $1.80. Use α = .1,
then α = .3, and finally α = .5. Using MAD, which α is the best?
Problems: 4.11
14. Data collected on the yearly registrations for a Six Sigma seminar at
the Quality College are shown in the following table:
a) Use exponential smoothing with a smoothing constant of 0.3 to
forecast the registrations at the seminar given in Problem 4.10. To
begin the procedure, assume that the forecast for year 1 was 5,000
people signing up.
b) What is the MAD?
*************************************************
BSOP 330 Week 2 Lab Assignments Chapter
Four Problems 4.23, 4.27, 4.33, and 4.35
For more classes visit
www.snaptutorial.com
Chapter Four Problems 4.23, 4.27, 4.33, and 4.35.
4.23
a) Compute MAD and MAPE for management’s technique
b) Do management’s results outperform (i.e., have smaller MAD and
MAPE than) a naive forecast?
c) Which forecast do you recommend, based on lower forecast error?
4.33
a) Forecast the number of transistors to be made next year, using
linear regression.
b) Compute the mean squared error (MSE) when using linear
regression.
15. c) Compute the mean absolute percent error (MAPE).
4.35
a) Use the model to predict the selling price of a house that is 1,860
square feet.
b) A 1,860-square-foot house recently sold for $95,000. Explain why
this is not what the model predicted.
c) If you were going to use multiple regressions to develop such a
model, what other quantitative variables might you include?
d) What is the value of the coefficient of determination in this
problem?
****************************************************
BSOP 330 Week 2 Southwestern Case study
For more classes visit
www.snaptutorial.com
1. Develop a forecasting model, justifying its selection over other
techniques, and project attendance through 2007.
2. ************************************************
BSOP 330 Week 3 Lab Assignments Chapter 13
problems 13.3, 13.5, 13.9, 13.21
For more classes visit
www.snaptutorial.com
16. Chapter 12, problems 12.1
L. Houts Plastics is a large manufacturer of injection-molded plastics
in North Carolina. An investigation of the company’s manufacturing
facility in Charlotte yields the information presented in the table
below. How would the plant classify these items according to an ABC
classification system?
Chapter 12, problems 12.5
William Beville’s computer training school, in Richmond, stocks
workbooks with the following characteristics:
Demand ,500 units/year
Ordering cost S = $25/order
Holding cost H = $4/unit/year
a) Calculate the EOQ for the workbooks.
b) What are the annual holding costs for the workbooks?
c) What are the annual ordering costs?
Chapter 12, problems 12.9
Southeastern Bell stocks a certain switch connector at its central
warehouse for supplying field service offices. The yearly demand for
these connectors is 15,000 units. Southeastern estimates its annual
holding cost for this item to be $25 per unit. The cost to place and
process an order from the supplier is $75. The company operates 300
days per year, and the lead time to receive an order from the supplier
is 2 working days.
17. a) Find the economic order quantity.
b) Find the annual holding costs.
c) Find the annual ordering costs.
d) What is the reorder point?
Chapter 12, problems 12.15
M. Cotteleer Electronics supplies microcomputer circuitry to a
company that incorporates microprocessors into refrigerators and
other home appliances. One of the components has an annual demand
of 250 units, and this is constant throughout the year. Carrying cost is
estimated to be $1 per unit per year, and the ordering cost is $20 per
order.
a) To minimize cost, how many units should be ordered each time an
order is placed?
b) How many orders per year are needed with the optimal policy?
c) What is the average inventory if costs are minimized?
d) Suppose that the ordering cost is not $20, and Cotteleer has been
ordering 150 units each time an order is placed. For this order policy
(of ) to be optimal, determine what the ordering cost would have to
be.
****************************************************
BSOP 330 Week 4 Lab Assignments Chapter 12,
problems 12.1, 12.5, 12.9, 12.15
For more classes visit
www.snaptutorial.com
18. L. Houts Plastics is a large manufacturer of injection-molded plastics
in North Carolina. An investigation of the company’s manufacturing
facility in Charlotte yields the information presented in the table
below. How would the plant classify these items according to an ABC
classification system?
Chapter 12, problems 12.5
William Beville’s computer training school, in Richmond, stocks
workbooks with the following characteristics:
Demand ,500 units/year
Ordering cost S = $25/order
Holding cost H = $4/unit/year
a) Calculate the EOQ for the workbooks.
b) What are the annual holding costs for the workbooks?
c) What are the annual ordering costs?
Chapter 12, problems 12.9
Southeastern Bell stocks a certain switch connector at its central
warehouse for supplying field service offices. The yearly demand for
these connectors is 15,000 units. Southeastern estimates its annual
holding cost for this item to be $25 per unit. The cost to place and
process an order from the supplier is $75. The company operates 300
days per year, and the lead time to receive an order from the supplier
is 2 working days.
a) Find the economic order quantity.
19. b) Find the annual holding costs.
c) Find the annual ordering costs.
d) What is the reorder point?
Chapter 12, problems 12.15
M. Cotteleer Electronics supplies microcomputer circuitry to a
company that incorporates microprocessors into refrigerators and
other home appliances. One of the components has an annual demand
of 250 units, and this is constant throughout the year. Carrying cost is
estimated to be $1 per unit per year, and the ordering cost is $20 per
order.
a) To minimize cost, how many units should be ordered each time an
order is placed?
b) How many orders per year are needed with the optimal policy?
c) What is the average inventory if costs are minimized?
d) Suppose that the ordering cost is not $20, and Cotteleer has been
ordering 150 units each time an order is placed. For this order policy
(of ) to be optimal, determine what the ordering cost would have to
be.
**************************************************
BSOP 330 Week 4 Quiz
For more classes visit
www.snaptutorial.com
BSOP-330 Week 4 Quiz
20. **************************************************
BSOP 330 Week 4 Southwestern Case study
Printing companies Programs and Inserts
For more classes visit
www.snaptutorial.com
1. For the programs, what are the EOQ's for both printing companies?
How many orders of each size will be needed?
2. For the inserts, what are the EOQ's for both printing companies?
How many orders of each size will be needed?
3. Using the EOQ's above and volume order information provided,
what will be the cost of the programs and inserts if they are purchased
from Quality Printing
3. Using the EOQ's above and volume order information provided,
what will be the cost of the programs and inserts if they are
purchased from First Printing.
4. **********************************************
BSOP 330 Week 5 Homework Problems Mater
Production Schedule Problem 1, 2 and 3
For more classes visit
www.snaptutorial.com
MASTER PRODUCTION SCHEDULE
21. MAKE-TO-STOCK
Beginning PAB prior to week number one is 500.
If the forecast is larger than the book orders, complete the MPS using
the forecast demand. If the booked orders is larger than the forecast
complete the MPS using the booked orders
Lead-time for MPS releases is one week.
All MPS releases must be in lot sizes of 250 units.
Period order coverage is one period.
1. Complete the MPS due line and the MPS released line.
2. Complete the PAB line.
3. Complete the ATP line.
BSOP Master Planning, Week 5 Assignment, Problem Two
Make-to-Stock MPS
GIVENS FOR THE MPS PROBLEM:
1. Beginning on-hand inventory prior to week one is 200 units.
2. If the forecast is larger than the book orders, complete the MPS
using the forecast demand. If the booked orders is larger than the
forecast complete the MPS using the booked orders
3. Lead-time for MPS planned orders is one week.
4. All MPS releases must be in lot sizes of 200 or multiples of 200.
22. REQUIRED:
Complete the MPS due and MPS planned lines.
Calculate the new projected on-hand inventory line.
Calculate the ATP line for the entire MPS.
BSOP330 Master Planning, Week 5, Problem 3
Forecast Disaggregation
Product Family Blenders
Model Number
Percent of the Annual Forecast
B-100
10.00%
B-200
7.00%
B-300
25.00%
B-400
30.00&
B-500
12.00%
23. B-600
16.00%
Total
100.00%
Note: the total percentage must equal exactly 100%.
If the aggregate forecast for the family of blenders for the month of
September is 5,000 units, complete the chart below.
***************************************************
BSOP 330 Week 5 Quiz
For more classes visit
www.snaptutorial.com
1.Question :(TCO 9, 10, & 12) The MPS
Student Answer:
must sum up to the total in the production plan.
can have any quantity necessary to meet customer demand.
is only used in make-to-stock manufacturing.
does not have to be tested for capacity limits.
2.Question :(TCO 12) In an assemble-to-order MPS, the items
stocked in inventory are
24. Student Answer:
finished goods.
component parts.
raw materials.
sub-assemblies.
3.Question :(TCOs 9, 11, & 12) Which one of the following pieces of
information would be more useful to the order entry department in a
make-to-stock company?
Student Answer:
The planned order receipt file
The planned MPS released quantity file
The available to promise file
The balance of the forecast quantity
4.Question :(TCO 12) A forecast
Student Answer:
is always 100 percent correct.
will get better and better the more time and money you spend.
is a time prediction of the future based on the past.
is a monthly project that marketing loves to do.
25. 5.Question :(TCO 10 & 12) In job shop (make-to-order) operations,
the master production schedule is usually expressed in
Student Answer:
end items.
modules.
kits.
customer orders.
warehouse orders.
*************************************************
BSOP 330 Week 6 Lab Assignments Chapter 14,
problems 14.1, 14.3, 14.9, 14.13
For more classes visit
www.snaptutorial.com
You have developed the following simple product structure of items
needed for your gift bag for a rush party for prospective pledges in
your organization. You forecast 200 attendees. Assume that there is
no inventory on hand of any of the items. Explode the bill of material.
(Subscripts indicate the number of units required.)
Chapter 14, problems 14.3
The demand for subassembly S is 100 units in week 7. Each unit of S
requires 1 unit of T and 2 units of U. Each unit of T requires 1 unit of
V, 2 units of W, and 1 unit of X. Finally, each unit of U requires 2
units of Y and 3 units of Z. One firm manufactures all items. It takes 2
26. weeks to make S, 1 week to make T, 2 weeks to make U, 2 weeks to
make V, 3 weeks to make W, 1 week to make X, 2 weeks to make Y,
and 1 week to make Z.
a) Construct a product structure. Identify all levels, parents, and
components.
b) b) Prepare a time-phased product structure.
Chapter 14, problems 14.9
As the production planner for Gerry Cook Products, Inc., you have
been given a bill of material for a bracket that is made up of a base,
two springs, and four clamps. The base is assembled from one clamp
and two housings. Each clamp has one handle and one casting. Each
housing has two bearings and one shaft. There is no inventory on
hand.
Your boss at Gerry Cook Products, Inc., has just provided you with
the schedule and lead times for the bracket in Problem 14.8. The unit
is to be prepared in week 10. The lead times for the components are
bracket (1 week), base (1 week), spring (1 week), clamp (1 week),
housing (2 weeks), handle (1 week), casting (3 weeks), bearing (1
week), and shaft (1 week). a) Prepare the time-phased product
structure for the bracket. b) In what week do you need to start the
castings?
Chapter 14, problems 14.13
Electro Fans has just received an order for one thousand 20-inch fans
due week 7. Each fan consists of a housing assembly, two grills, a fan
assembly, and an electrical unit. The housing assembly consists of a
frame, two supports, and a handle. The fan assembly consists of a hub
and five blades. The electrical unit consists of a motor, a switch, and a
knob. The following table gives lead times, on-hand inventory, and
scheduled receipts.
*************************************************
27. BSOP 330 Week 7 Case Study Final
For more classes visit
www.snaptutorial.com
Question 1. Which variations in demand for police services should be
considered in an aggregate plan for resources? Which variations can
be accomplished with short-term scheduling adjustments?
Question 2. Evaluate the current staffing plan. What does it cost? Are
26 officers sufficient to handle the normal workload?
Question 3: Determine the cost of the Chiefs plan. Do you need to
implement the Chief's plan or can the current staff handle the load?
Explain your thinking
Question 4: From the data in the case, determine the schools current
cost to provide police services during football games.
Question 5: There isn't any one right answer for this question. This a
critical thinking question. Based on what you have read and the
scheduling and costs you put together, what do you see as alternatives
for the manning the schedule.
**************************************************
BSOP 330 Week 7 Lab Assignments Chapter 16,
problems 16.1, 16.3, 16.5, and 16.9
For more classes visit
www.snaptutorial.com
28. Chapter 16, problems 16.1, 16.3, 16.5, and 16.9 (pages 640-641)
16.1 Leblanc Electronics, Inc., in Nashville, produces short runs of
custom airwave scanners for the defense industry. You have been
asked by the owner, Larry Leblanc, to reduce inventory by
introducing a kanban system. After several hours of analysis, you
develop the following data for scanner connectors used in one work
cell. How many kanbans do you need for this connector?
Daily demand 1,000 connectors
Lead time 2 days
Safety stock day
Kanban size 500 connectors
16.3
Chris Millikan Manufacturing, Inc., is moving to kan-bans to support
its telephone switching-board assembly lines. Determine the size of
the kanban for subassemblies and the number of kanbans needed.
16.5
Discount-Mart, a major East Coast retailer, wants to determine the
economic order quantity (see Chapter 12 for EOQ formulas) for its
halogen lamps. It currently buys all halogen lamps from Specialty
Lighting Manufacturers, in Atlanta. Annual demand is 2,000 lamps,
ordering cost per order is $30, annual carrying cost per lamp is $12.
a) What is the EOQ?
b) What are the total annual costs of holding and ordering (managing)
this inventory?
29. c) How many orders should Discount-Mart place with Specialty
Lighting per year?
16.9
a) Given the following information about a product, at Phyllis
Simon’s firm, what is the appropriate setup time?
b) ************************************************
BSOP 330 Week 7 Quiz
For more classes visit
www.snaptutorial.com
1. (TCOs 5 & 12) Manufacturing cycle time is best defined as the
(Points : 4)
length of the work shift, expressed in minutes per day.
time it takes a unit to move from one workstation to the next.
time between the start of one unit and the start of the next unit.
sum of all the task times to make one unit of a product.
time from raw materials receipt to finished product exit.
2. (TCOs 5 & 12) The implementation of JIT offers several
advantages, including (Points : 4)
reduced throughput.
increase in variability to better respond to variable demand.
decreased profit margins.
support for lean production.
increased work in process inventory.
30. 3. (TCOs 5 & 12) Which of the following statements regarding JIT in
services is true? (Points : 4)
Restaurants do not use JIT layouts because they interfere with the
creation of a good service scape.
Excess customer demand in services such as air travel is met by
dipping into safety stocks.
All of the JIT techniques for dealing with suppliers, layout, inventory,
and scheduling are used in services.
Scheduling is not relevant to the effective use of JIT in services.
All of the above are false.
4. (TCO 12) Which of the following is the author of the phrase,
"Inventory is evil"? (Points : 4)
Poka Yoke
Pat "Keiretsu" Morita
Kanban Polka
Shigeo Shingo
None of the above
5. (TCO 12) Great Lakes Barge and Baggage Company makes,
among other things, battery-operated bilge pumps. Which of the
following activities isnot part of JIT? (Points : 4)
They communicate their schedules to suppliers.
They produce in long production runs to reduce the impact of setup
costs.
They use a pull system to move inventory.
They continuously work on reducing setup time.
They produce in small lots.
******************************************************