BR09 Proposed Roof Plan and Details
•
1 like•598 views
This document is a roof plan and details for a proposed side and rear extension showing roof framing elements like rafters, fascia boards, and ridge beams. It specifies that rafters and trimmers around roof lights will be doubled up. The roofing materials and insulation are also outlined to meet certain insulation and ventilation standards.
Report
Share
Report
Share
Download to read offline
Recommended
011 - Proposed Ground Floor plan
1. The document contains plans for 3 apartments in a new development called Hudson Close Apartments. It includes a ground floor plan showing the layout of the apartments, common areas, and details.
2. The plans show the layout of the individual apartments including bedrooms, bathrooms, kitchens, and living areas. Common areas on the ground floor include a hallway and stairwell.
3. Technical specifications are provided for the building materials and construction methods to be used, including the foundations, flooring, walls, roof, ventilation, and other details.
Specification ceiling cei 01 NEW PERTH CHILDRENS HOSPITAL AMF THERMATEX
This document specifies the requirements for two types of suspended acoustic tile ceilings for a new children's hospital. CEI01 tiles will have an anti-microbial coating and CEI03 tiles will have a fine texture finish. Both tile types will be 1200mm x 600mm x 24mm and have a minimum sound absorption of 0.65 and sound attenuation of 41dB. They will be installed using an AMF Ventatec grid suspension system with AMF perimeter trim profiles and wall angles, fixing clips, and column rings. Tile color will be white RAL 9010. Ceiling heights will be as shown on project drawings.
T-Lock and Arrow-Lock Presentation Email 1.23.13
This document discusses Amer-Plate T-Lock, a protective lining product developed by Ameron in 1946. It describes a wet well in Hampton Roads, Virginia that has been in operation since 1961 and was still lined with T-Lock when photographed in 2011. It also lists typical applications for T-Lock lining systems such as wet wells, manholes, and concrete structures.
I-Joist Manual 12-2015 ESP-RSB Copyrights Issue Ver 2.3
This document provides contact information for a company that produces timber I-joists and describes their applications in construction. It includes six case studies showing how the company's I-joists have been used in various roofing and flooring structures. Terminology related to I-joists is defined, and the document outlines two ranges of I-joists available along with their general applications in roof structures such as mono pitched, dual pitched, and flat roofs.
External Floormitre
The External Floormitre from Quantum Flooring is designed to make fitting vinyl in external corners easier, quicker, and smoother. It is a flexible external cove with a patent-pending design that allows for a perfect, uniform finish every time. The document provides instructions for installing the External Floormitre as well as technical data and cleaning instructions.
Mitten - Vinyl Accessories 101
Before vinyl siding itself can be hung, a number of accessories must be installed first.
Every place where vinyl siding joins something else—a window, a door, another wall—requires the appropriate trim piece.
SecureguardSR1
The document provides specifications for the Secureguard SR1 high security fence from Barkers Fencing. The fence features anti-climb mesh, bolt-through security fixings, optional anti-climb toppings, and exceeds British security standards. It is rigorously tested, can be powder coated in various colors, and is designed to securely protect areas up to slopes of 21 degrees.
Busch enterprises
Busch Enterprises manufactures an innovative adhesive system that sets in seconds and cures in minutes, producing no fumes or VOCs. The adhesive can be used for carpet tack strips, tiles, flooring and facilities maintenance projects. Busch Enterprises also distributes drywall, fiber cement backerboard, various roofing materials, gutters, fencing, siding and other building products.
Recommended
011 - Proposed Ground Floor plan
1. The document contains plans for 3 apartments in a new development called Hudson Close Apartments. It includes a ground floor plan showing the layout of the apartments, common areas, and details.
2. The plans show the layout of the individual apartments including bedrooms, bathrooms, kitchens, and living areas. Common areas on the ground floor include a hallway and stairwell.
3. Technical specifications are provided for the building materials and construction methods to be used, including the foundations, flooring, walls, roof, ventilation, and other details.
Specification ceiling cei 01 NEW PERTH CHILDRENS HOSPITAL AMF THERMATEX
This document specifies the requirements for two types of suspended acoustic tile ceilings for a new children's hospital. CEI01 tiles will have an anti-microbial coating and CEI03 tiles will have a fine texture finish. Both tile types will be 1200mm x 600mm x 24mm and have a minimum sound absorption of 0.65 and sound attenuation of 41dB. They will be installed using an AMF Ventatec grid suspension system with AMF perimeter trim profiles and wall angles, fixing clips, and column rings. Tile color will be white RAL 9010. Ceiling heights will be as shown on project drawings.
T-Lock and Arrow-Lock Presentation Email 1.23.13
This document discusses Amer-Plate T-Lock, a protective lining product developed by Ameron in 1946. It describes a wet well in Hampton Roads, Virginia that has been in operation since 1961 and was still lined with T-Lock when photographed in 2011. It also lists typical applications for T-Lock lining systems such as wet wells, manholes, and concrete structures.
I-Joist Manual 12-2015 ESP-RSB Copyrights Issue Ver 2.3
This document provides contact information for a company that produces timber I-joists and describes their applications in construction. It includes six case studies showing how the company's I-joists have been used in various roofing and flooring structures. Terminology related to I-joists is defined, and the document outlines two ranges of I-joists available along with their general applications in roof structures such as mono pitched, dual pitched, and flat roofs.
External Floormitre
The External Floormitre from Quantum Flooring is designed to make fitting vinyl in external corners easier, quicker, and smoother. It is a flexible external cove with a patent-pending design that allows for a perfect, uniform finish every time. The document provides instructions for installing the External Floormitre as well as technical data and cleaning instructions.
Mitten - Vinyl Accessories 101
Before vinyl siding itself can be hung, a number of accessories must be installed first.
Every place where vinyl siding joins something else—a window, a door, another wall—requires the appropriate trim piece.
SecureguardSR1
The document provides specifications for the Secureguard SR1 high security fence from Barkers Fencing. The fence features anti-climb mesh, bolt-through security fixings, optional anti-climb toppings, and exceeds British security standards. It is rigorously tested, can be powder coated in various colors, and is designed to securely protect areas up to slopes of 21 degrees.
Busch enterprises
Busch Enterprises manufactures an innovative adhesive system that sets in seconds and cures in minutes, producing no fumes or VOCs. The adhesive can be used for carpet tack strips, tiles, flooring and facilities maintenance projects. Busch Enterprises also distributes drywall, fiber cement backerboard, various roofing materials, gutters, fencing, siding and other building products.
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed First Floor...
This document contains construction notes and specifications for flooring, doors, decoration, drainage and miscellaneous items. It includes details for installing vinyl tile flooring in various areas, laying floor tiles with contrasting nosings on the customer staircase, and installing sheet vinyl flooring in staff rooms and toilets. Fire rated doors are to be supplied and hung according to plans. Walls and ceilings are to be prepared and painted white, with door frames painted dark grey. Drainage works include installing new waste pipes, traps and connecting to existing drainage systems. Miscellaneous items like alarm cables and power sockets will be painted white.
Home Fallout/Bomb Shelter Outside Concrete
Really cool outside underground concrete fallout shelter.
Old Civil Defense plans.
http://modernsurvivalonline.com
Quantum Riba and NBS Plus
The Floor-Mitre and Tri-Mitre are durable corner junctions designed by Quantum Flooring Solutions to provide a perfect, uniform finish when fitting vinyl flooring and ceilings. The Floor-Mitre is for floor corners and makes installation easier, quicker and smoother, while the Tri-Mitre is for ceiling corners like in wet rooms and reduces bacteria buildup. Both products are flexible, reduce contaminants, and are suitable for use with Quantum Flooring capping and coving. They are made of PVC and available in pre-cut lengths.
The Family Fallout Shelter - Civil Defense - 1959
Here is an old Civil Defense booklet related to fallout shelters and nuclear war.
http://modernsurvivalonline.com
House Harripersad Submission
The document contains architectural plans and drawings for proposed additions and alterations to an existing dwelling. It includes floor plans and elevations showing details of the proposed additions including a new patio, laundry area, and entertainment area. It also provides specifications for materials, roofing, drainage, and other construction details. Dimensions, technical notes, and requirements are included to guide the construction work in compliance with relevant standards and regulations.
Home Fallout Shelter Above Ground - Civil Defense
This document provides plans and specifications for building an aboveground home fallout shelter. The shelter is designed to protect 6 adults from fallout radiation. It can be constructed out of concrete blocks and reinforced concrete. The shelter plans include dimensions, construction details, ventilation requirements, optional configurations and a materials list. The document emphasizes obtaining proper permits and following building codes when constructing the shelter.
MDSI Series 10 Product Data Sheet
The Series 10 Glazed Joint system is an economical rout and return system that utilizes clips and caulk to create a 1/2-inch joint. It is well-suited for fascia, soffits, columns, and canopies. The system features aluminum clips to hold aluminum or composite panels in place with recommended fasteners depending on the substrate. Panel sizes can be up to 60 inches wide by 192 inches long.
BR02 Proposed Foundation Plan
This document contains information about the proposed foundation plan and drainage for a home renovation project. It includes details on radon protection measures like using a radon membrane on the floor and cavity walls. It also specifies that all underground drainage pipes are to be encased in concrete and that manholes are to be constructed from engineering bricks on a concrete base. Above ground drainage requirements are also outlined, like pipe sizes and vent locations.
Freelance project management case studies - residential
This document contains construction drawings for a proposed residential extension, including:
- Section and detail drawings showing proposed structures like the kitchen aperture support, eaves, substructure, and roof.
- Notes specifying materials and methods for elements like the external walls, windows, drainage, foundations, and more.
- The project aims to gain approval for a new two-story extension to an existing dwelling.
- Freelance project management services included producing the drawings, liaising with structural engineers, and conducting site inspections.
BR06 Existing and Proposed Elevation
This document contains drawings and notes for a proposed side and rear extension at an address in Whitchurch, Cardiff. The drawings show the existing and proposed elevations of the front, rear and side of the property. Notes provide details on materials and construction methods to match the existing building, as well as requirements for windows, doors, insulation and ventilation. Key aspects that must be addressed include using materials that match the existing brickwork, render and roof tiles, installing lintels and cavity trays properly, using safety glass where required, meeting energy efficiency standards for windows and doors, and adding trickle vents.
FBP_1200 Series details-1213
This document provides construction details for various elements of a multi-level residential building, including:
- Minimum floor void depths for drainage of 705mm, 460mm, and 315mm for Blocks B, C, and D, respectively.
- Lower ground floor construction of beam and block with a U-value of 0.13 W/m2K.
- External wall construction for the lower ground floor with a U-value of 0.18 W/m2K.
- Part ground and first floor separating floor construction with an airborne sound insulation of minimum 45dB and impact sound insulation of 62dB.
- Pitched clay tiled roof construction to achieve a U-value of 0.
Taiyaba rashid acp
The document provides an estimate for an aluminium composite panel cladding system for the external surface of a building. It includes 6 items: (1) design of the cladding system, (2) materials including aluminium frames, composite panels, sealing, flashing, (3) field testing, (4) measurement and payment based on actual clad area, (5) rates which include all labor and materials, and (6) an overall base price of Rs. 3500/m2.
Jack_Lambourne - Portfolio
This document contains construction details and specifications for a multi-story building including a market place and offices. It includes details on the exterior wall, ground floor, upper floor, balcony floor, glazing system, and roof constructions. All materials and dimensions are specified according to relevant National Building Specification standards. Elevations, sections and plans are provided at a scale of 1:20.
PROJECT 3-Layout1 (2)
This document provides general specifications for wood framing construction drawings. It specifies that structural framing materials must conform to standards in the British Columbia Building Code and Span Book. Dimensions take precedence over scale in the drawings. The builder is responsible for ensuring construction complies with all codes and obtaining any required engineering certifications. Insulation requirements and specifications for roof ventilation, floor joists and beams are also outlined.
Freelance project management residential
- The project aimed to gain planning approval for revisions to originally approved drawings for residential flats in Hertfordshire, UK to reflect construction changes.
- Services provided included defining the client's brief, undertaking a survey, producing existing and proposed drawings, and liaising with the planning department.
- Drawings produced included sections, elevations, and details showing proposed structural, material, and systems alterations.
Freelance project management residential
The document provides details of a freelance project management case study for a new two-storey residential extension in London. The project aim was to produce a set of building control drawings including sections, plans, construction details, and ensuring compliance with UK building regulations. Freelance project management services included producing the drawings, liaising with the structural engineer on structural matters, and conducting site inspections. Key aspects involved addressing existing below-ground drainage issues discovered during excavation to prevent delays.
FSBP Masonry Magazine January 2015
The document discusses a cavity wall system developed by Firestone Building Products called the Enverge Cavity Wall System. The system includes continuous insulation (CI), an air and vapor barrier, and thru-wall flashing. These products work together to improve energy efficiency in buildings by preventing thermal bridging and moisture penetration. Masonry contractors installing the system can achieve long-term energy savings for projects.
Titan Outlet Airex Manufacturing Inc
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
Photograghy
This document contains working drawings and notes for a 3 bedroom bungalow project. It includes 10 notes that provide specifications for dimensions, reinforcement, drainage, plumbing, termite treatment, concrete mixes and more. The project number is HARTS/CIVIL/07/10/2016 and was drawn by N.OKUTHE and checked by N.O.O for client OKINYO OKEYO. Perspective drawings of the bungalow at a scale of 1:200 are also included.
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...Airex Manufacturing Inc
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
We manufacture component products for the outdoor #HVAC equipment piping area,designed & engineered to support #sustainable #energy efficient system performance
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather and air leakage resistant, vibration control, rodent proofing, wall enclosure system, and has become the preferred industry leader. http://airexmfg.com/titan/7545 102 final elevations as proposed
This document provides construction specifications for a two-storey domestic extension project. It includes 3 key elements:
1) Ground floor construction will be an in-situ cast concrete slab on insulation and damp proof membrane. External walls will be cavity construction with brick outer skin, cavity insulation and block inner skin.
2) Windows and doors will be uPVC units meeting relevant thermal and structural standards. Internal partitions will be blockwork or timber stud walls.
3) The pitched roof will have rafters, insulation, and single-ply membrane. The dormer roof will have an optimized system with insulation and vapor control layer. Services and general works must comply with regulations.
House Odendahl (SITE PLAN)-A1
The document is a site plan and specifications for renovations and additions to a property. It includes demolishing some walls, adding new windows and doors, renovating bathrooms, constructing a new garage and boundary walls, and other interior renovations. Dimensions and materials are provided for the new construction. The total existing building area is 227.53 sqm and the new construction will increase this by 72.94 sqm, bringing the total coverage to 31.21% of the 1,197 sqm erf. Health and safety, contractor, and other legal notes are included at the bottom.
More Related Content
What's hot
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed First Floor...
This document contains construction notes and specifications for flooring, doors, decoration, drainage and miscellaneous items. It includes details for installing vinyl tile flooring in various areas, laying floor tiles with contrasting nosings on the customer staircase, and installing sheet vinyl flooring in staff rooms and toilets. Fire rated doors are to be supplied and hung according to plans. Walls and ceilings are to be prepared and painted white, with door frames painted dark grey. Drainage works include installing new waste pipes, traps and connecting to existing drainage systems. Miscellaneous items like alarm cables and power sockets will be painted white.
Home Fallout/Bomb Shelter Outside Concrete
Really cool outside underground concrete fallout shelter.
Old Civil Defense plans.
http://modernsurvivalonline.com
Quantum Riba and NBS Plus
The Floor-Mitre and Tri-Mitre are durable corner junctions designed by Quantum Flooring Solutions to provide a perfect, uniform finish when fitting vinyl flooring and ceilings. The Floor-Mitre is for floor corners and makes installation easier, quicker and smoother, while the Tri-Mitre is for ceiling corners like in wet rooms and reduces bacteria buildup. Both products are flexible, reduce contaminants, and are suitable for use with Quantum Flooring capping and coving. They are made of PVC and available in pre-cut lengths.
The Family Fallout Shelter - Civil Defense - 1959
Here is an old Civil Defense booklet related to fallout shelters and nuclear war.
http://modernsurvivalonline.com
House Harripersad Submission
The document contains architectural plans and drawings for proposed additions and alterations to an existing dwelling. It includes floor plans and elevations showing details of the proposed additions including a new patio, laundry area, and entertainment area. It also provides specifications for materials, roofing, drainage, and other construction details. Dimensions, technical notes, and requirements are included to guide the construction work in compliance with relevant standards and regulations.
Home Fallout Shelter Above Ground - Civil Defense
This document provides plans and specifications for building an aboveground home fallout shelter. The shelter is designed to protect 6 adults from fallout radiation. It can be constructed out of concrete blocks and reinforced concrete. The shelter plans include dimensions, construction details, ventilation requirements, optional configurations and a materials list. The document emphasizes obtaining proper permits and following building codes when constructing the shelter.
MDSI Series 10 Product Data Sheet
The Series 10 Glazed Joint system is an economical rout and return system that utilizes clips and caulk to create a 1/2-inch joint. It is well-suited for fascia, soffits, columns, and canopies. The system features aluminum clips to hold aluminum or composite panels in place with recommended fasteners depending on the substrate. Panel sizes can be up to 60 inches wide by 192 inches long.
What's hot (7)
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed First Floor...
Proposed_Floorplans_Professional Practice_DS_Group-A1@50_Proposed First Floor...
Similar to BR09 Proposed Roof Plan and Details
BR02 Proposed Foundation Plan
This document contains information about the proposed foundation plan and drainage for a home renovation project. It includes details on radon protection measures like using a radon membrane on the floor and cavity walls. It also specifies that all underground drainage pipes are to be encased in concrete and that manholes are to be constructed from engineering bricks on a concrete base. Above ground drainage requirements are also outlined, like pipe sizes and vent locations.
Freelance project management case studies - residential
This document contains construction drawings for a proposed residential extension, including:
- Section and detail drawings showing proposed structures like the kitchen aperture support, eaves, substructure, and roof.
- Notes specifying materials and methods for elements like the external walls, windows, drainage, foundations, and more.
- The project aims to gain approval for a new two-story extension to an existing dwelling.
- Freelance project management services included producing the drawings, liaising with structural engineers, and conducting site inspections.
BR06 Existing and Proposed Elevation
This document contains drawings and notes for a proposed side and rear extension at an address in Whitchurch, Cardiff. The drawings show the existing and proposed elevations of the front, rear and side of the property. Notes provide details on materials and construction methods to match the existing building, as well as requirements for windows, doors, insulation and ventilation. Key aspects that must be addressed include using materials that match the existing brickwork, render and roof tiles, installing lintels and cavity trays properly, using safety glass where required, meeting energy efficiency standards for windows and doors, and adding trickle vents.
FBP_1200 Series details-1213
This document provides construction details for various elements of a multi-level residential building, including:
- Minimum floor void depths for drainage of 705mm, 460mm, and 315mm for Blocks B, C, and D, respectively.
- Lower ground floor construction of beam and block with a U-value of 0.13 W/m2K.
- External wall construction for the lower ground floor with a U-value of 0.18 W/m2K.
- Part ground and first floor separating floor construction with an airborne sound insulation of minimum 45dB and impact sound insulation of 62dB.
- Pitched clay tiled roof construction to achieve a U-value of 0.
Taiyaba rashid acp
The document provides an estimate for an aluminium composite panel cladding system for the external surface of a building. It includes 6 items: (1) design of the cladding system, (2) materials including aluminium frames, composite panels, sealing, flashing, (3) field testing, (4) measurement and payment based on actual clad area, (5) rates which include all labor and materials, and (6) an overall base price of Rs. 3500/m2.
Jack_Lambourne - Portfolio
This document contains construction details and specifications for a multi-story building including a market place and offices. It includes details on the exterior wall, ground floor, upper floor, balcony floor, glazing system, and roof constructions. All materials and dimensions are specified according to relevant National Building Specification standards. Elevations, sections and plans are provided at a scale of 1:20.
PROJECT 3-Layout1 (2)
This document provides general specifications for wood framing construction drawings. It specifies that structural framing materials must conform to standards in the British Columbia Building Code and Span Book. Dimensions take precedence over scale in the drawings. The builder is responsible for ensuring construction complies with all codes and obtaining any required engineering certifications. Insulation requirements and specifications for roof ventilation, floor joists and beams are also outlined.
Freelance project management residential
- The project aimed to gain planning approval for revisions to originally approved drawings for residential flats in Hertfordshire, UK to reflect construction changes.
- Services provided included defining the client's brief, undertaking a survey, producing existing and proposed drawings, and liaising with the planning department.
- Drawings produced included sections, elevations, and details showing proposed structural, material, and systems alterations.
Freelance project management residential
The document provides details of a freelance project management case study for a new two-storey residential extension in London. The project aim was to produce a set of building control drawings including sections, plans, construction details, and ensuring compliance with UK building regulations. Freelance project management services included producing the drawings, liaising with the structural engineer on structural matters, and conducting site inspections. Key aspects involved addressing existing below-ground drainage issues discovered during excavation to prevent delays.
FSBP Masonry Magazine January 2015
The document discusses a cavity wall system developed by Firestone Building Products called the Enverge Cavity Wall System. The system includes continuous insulation (CI), an air and vapor barrier, and thru-wall flashing. These products work together to improve energy efficiency in buildings by preventing thermal bridging and moisture penetration. Masonry contractors installing the system can achieve long-term energy savings for projects.
Titan Outlet Airex Manufacturing Inc
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
Photograghy
This document contains working drawings and notes for a 3 bedroom bungalow project. It includes 10 notes that provide specifications for dimensions, reinforcement, drainage, plumbing, termite treatment, concrete mixes and more. The project number is HARTS/CIVIL/07/10/2016 and was drawn by N.OKUTHE and checked by N.O.O for client OKINYO OKEYO. Perspective drawings of the bungalow at a scale of 1:200 are also included.
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...Airex Manufacturing Inc
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather & air leakage resistant, vibration control, rodent proofing, wall enclosure system. Air Leakage Wall Seal, Protect Indoor Air Quality! @NAHB #HVAC http://www.airexmfg.com/titan
We manufacture component products for the outdoor #HVAC equipment piping area,designed & engineered to support #sustainable #energy efficient system performance
The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather and air leakage resistant, vibration control, rodent proofing, wall enclosure system, and has become the preferred industry leader. http://airexmfg.com/titan/7545 102 final elevations as proposed
This document provides construction specifications for a two-storey domestic extension project. It includes 3 key elements:
1) Ground floor construction will be an in-situ cast concrete slab on insulation and damp proof membrane. External walls will be cavity construction with brick outer skin, cavity insulation and block inner skin.
2) Windows and doors will be uPVC units meeting relevant thermal and structural standards. Internal partitions will be blockwork or timber stud walls.
3) The pitched roof will have rafters, insulation, and single-ply membrane. The dormer roof will have an optimized system with insulation and vapor control layer. Services and general works must comply with regulations.
House Odendahl (SITE PLAN)-A1
The document is a site plan and specifications for renovations and additions to a property. It includes demolishing some walls, adding new windows and doors, renovating bathrooms, constructing a new garage and boundary walls, and other interior renovations. Dimensions and materials are provided for the new construction. The total existing building area is 227.53 sqm and the new construction will increase this by 72.94 sqm, bringing the total coverage to 31.21% of the 1,197 sqm erf. Health and safety, contractor, and other legal notes are included at the bottom.
Atrium Details
The document provides details for constructing an atrium structure including a hollowcore precast slab supported by welded steel angles and brackets. It specifies a vapor barrier, cement particle board, mastic sealant, and floor finish. The atrium structure will support an extruded aluminum curtain walling system with flush joints sealed by silicone. The curtain walling is designed to have a water tightness of 600Pa or better and wind load resistance of 2200Pa or better. It will incorporate a drained cavity, rigid insulation, and double glazed units set in aluminum channels.
Proposed Builder's Work Plan for Pub/Restaurant
Client: Whitbread
Brand: Premier Inn/Table Table
Site: The Gateway, Eastleigh.
Drawing: Proposed Builder's Work
Structural glazing details
This document provides details for the structural glazing system on a primary health care center building, including:
1) A concrete kicker/foundation reinforced to engineer's specifications supports a hollowcore floor and proprietary insulation.
2) A reinforced screed with polypropylene fibers is installed over the insulation.
3) Aluminum spider clamps hold structural glazing panels in place that are connected to the foundation kicker via expansion bolts for stability.
Mill 14-1-15 - Sheet - A107 - PROPOSED EAST & SOUTH ELEVATIONS
This document contains floor plans and specifications for upgrades to an existing mill building and silo. It includes floor levels for the existing structure and proposed additions. It then provides details on proposed upgrades to the external walls, floors, windows, silo walls and first/second floors. These upgrades include adding insulation, new flooring materials, triple glazed windows and new cladding to improve energy efficiency. Dimensions and materials are specified.
final dcc
This document provides details of the plans for retrofitting an existing apartment building in Dublin to meet Passivhaus energy standards. It includes floor plans and sections showing the proposed design with increased insulation, airtightness and mechanical ventilation. Technical specifications are given for the insulation levels and materials used in the walls, roof, floors and balconies to achieve ultra-low heat loss. The retrofit aims to significantly improve the building's energy efficiency from its current low rating.
Similar to BR09 Proposed Roof Plan and Details (20)
Freelance project management case studies - residential
Freelance project management case studies - residential
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...
Titan Out Engineering Solution of Wall Sealing Refrigerant Line Penetrations ...
Mill 14-1-15 - Sheet - A107 - PROPOSED EAST & SOUTH ELEVATIONS
Mill 14-1-15 - Sheet - A107 - PROPOSED EAST & SOUTH ELEVATIONS
More from sarah ralphs
CIAT A2 SHEETS compressed
Sarah Ralphs received an award from Cardiff University's Centre for Innovation and Academic Teaching (CIAT) in 2011 while she was a student at the University of Wales Institute, Cardiff (UWIC). The award recognized her work developing online resources to support students. However, the document does not provide any details about Sarah Ralphs' background, the specific online resources she developed, or what the CIAT award entailed.
First floor a2 sheet
This document is an architectural drawing of the first floor of Green Primary School at a scale of 1:200. It was produced by Sarah Ralphs on May 28, 2011 and is sheet 3 of 10 for the school's stage 4 plans. The drawing was created using Autodesk student design software.
ground floor a2 sheet
The document is a scale floor plan drawing of the ground floor of Green Primary School produced by Autodesk student software. It includes the scale of 1:200 and identifies it as sheet 2 of 10 for the overall plans. The date of the drawing is 28/05/11 and it was produced by Sarah Ralphs.
BR08 Proposed Section B - B
The document discusses requirements for gas and electrical safety for a proposed home extension including:
1) Gas fittings must be installed by a certified gas safe installer and the installer must provide their license information.
2) Electrical work must meet Part P electrical safety standards and be designed, installed, and tested by a competent electrician. Inspection certificates must be provided.
3) The proposed ground floor construction includes a concrete floor, insulation, damp proof membrane, hardcore, and damp proof course.
BR07 Proposed Section A - A
This document contains information about gas and electrical safety requirements for a proposed home extension project located at 4 Ty-Newydd, Whitchurch, Cardiff. It specifies that gas work must be completed by a certified Gas Safe installer and lists the documentation required from the installer. Electrical work must comply with Part P electrical safety standards and be designed, installed, and tested by a qualified electrician according to BS 7671. Inspection and testing certificates must be provided to the local council.
BR05 Proposed Joist Plan
This document is a proposed first floor plan showing the layout of 4 bedrooms, 1 bathroom, and 1 en suite on the first floor of a home renovation project. Key details include the dimensions and proposed locations of bedrooms, bathrooms, and other spaces. Construction details are provided for the floor joists, including grades, spacing, reinforcement, and connections to walls.
BR01 Existing Floor Plans and Visuals
This document provides existing floor plans and photographs of 4 Ty-Newydd in Whitchurch, Cardiff along with notes for a proposed side and rear extension project. The plans show the existing layout of the ground floor and first floor along with adjacent structures. Notes specify that exposed timber will be treated per building regulations, temporary supports will be used during demolition and construction, and party wall notices must be issued where applicable.
3D Render - School
This document appears to be a sheet containing information about a 3D render project for Sarah Ralphs of Green Primary School. It lists her name, the school, the date of 28/05/11, and notes it is for "Stage 4", perhaps referring to a class or grade level. In 3 sentences or less.
Ex ren rear view school 1
This document appears to be a sheet containing information about a building project. It lists Sarah Ralphs and Green Primary School. It also mentions a date of 28/05/11 and includes notes about a rear view and external renders.
ex ren left-right school 1
This document appears to be a sheet for work being done at Green Primary School. It lists Sarah Ralphs and notes that the stage of work is stage 4. The only other information provided is that external renders are to be done from left to right from the rear of the building.
Elevations North to West School 1
This document appears to be architectural plans or drawings for a building project. It includes a date of 28/05/11 and the name Sarah Ralphs. The title "Elevations from North to West" suggests it contains drawings showing the elevations or sides of a building as seen from the north and facing west.
School in locartion ren ex 1
This document provides an aerial view of Green Primary School at a scale of 1:200. It was created on May 28th, 2011 for Sarah Ralphs as part of her Stage 4 project. The drawing shows the layout of the school buildings and grounds from above.
FLOOR PLANS Pentan
This document appears to be a CAD file containing floor plans for a building project. The file name and date indicate it holds digital drawings related to the layout and design of floors. In a few short sentences, the summary captures the core information that the document file contains CAD floor plan drawings for a construction project.
Elevations Pentan
This is a short document title indicating an AutoCAD drawing file with elevations. The file is located in the G drive folder and was last modified on November 8, 2016 at 9:26 am.
More from sarah ralphs (14)
BR09 Proposed Roof Plan and Details
- 1. Fascia Board Rafters/trimmers to be doubled up around velux rooflights Wall Plate Ridge Ridge Rafters/trimmers to be doubled up around velux rooflights Wall Plate Wall Plate Fascia Board Fascia Board Proposed Side & Rear Extension at 4 Ty-Newydd, Whitchurch, Cardiff. CF14 1NN Drawn by Date M Ferreira 02/2011 Checked by Date B McCarthy 02/2011 1:100 on A3 Drawing Name Drawing Scale Drawing Number: Status Revision BR/09 of 9 Job Title Proposed Roof Plan and Details BMac Design & Developments 07766 317970 / 02920 310595 3 Bishops Road, Whitchurch, Cardiff. CF14 1LT RoofRoofRoofRoof Where slopeabutswall/roof,stepped code 4lead flashing and soakers or cover flashing andsoakers or cover flashingwillbeprovided, allas recommended by roof tilemanufacturer, Fascia/soffit to match existing, wind bracing andbinders to therooftobeprovided and fixed all in accordancewithmanufacturer's specificationsand to B.S.5268Part 31985. Galvanised nails to beused throughout.Roof to be in accordancewithStructural Engineersdetails andto consist of 100x50mm treatedS.W. wallplate, securely vertically fixedbygalvanised mild steel. 1000x30x5mm thick restraint straps at 2000mm max, centres, 200x50mm C16 gradedS.W. treated roof joist at 350mm c/c manufactured inaccordance with B.S.5268: Part3.AndStructural Engineersdetails.Anybracing to be inaccordance with the Building Regulations. NOTES - GENERAL Cavity sealedat eaves. Windows/door reveals andcills to havewindowformer/cavity closer by supplier. Door reveals to be filled with polystyrene slab 75mm x 150mm wide. Thermal conductivity max. 0.037 w/mk. Exposedstructuraltimbertobe preservative treated as per Building Regulations1990 Approved Document to support Schedule 7, Section 1.6b. Cavity is to be maintained for at least 225mm belowD.P.C level. Mono pitch roof ventilation to be breathable roofing felt Permo® forte should be laid in accordance with manufacturers installation details and BBA/IAB Certificates. Proposed Roof Plan Sloping Roof Detail Celotex XR4165 165mm Insulationbetween ceiling joiststo achieve U valueof0.18W/m2K.Maintain 50mm air gap above.On existing rafters counter battonwillberequiredtothe underside in addition to theabove, Tape the joints of the Celotex with Celotex InsulationTape and sealthe perimeter edges with mastic to rovide a VCL, Nailor screwplasterboard or otherliningthroughthe insulation to the rafter, ensuring thatthe length of thefasteners isadequate to secure theplasterboard lining. Tiling Speedline LR (Low Resistance) breathable membrane or similar approved Rafters with 50mm dair gap above ddinsulation Celotex XR4165 9.5mm plasterboard Scaled dimensions may be used for approximation. Ensure only figured dimensions are used for construction. All dimensions to be checked on site.