Its objective is a complex analysis of the conditions relating to the choice of technical and scientific education path by women, their
aspirations and expectations, as well as realisation of these aspirations on the labour market. During
this year-long project we analysed the issue of why young women do or do not choose technical
and scientific studies (from the STEM area), how they evaluate their preparation to build a career in
the technology industry, how well they do at technical HEIs, their approach to studying and further
activity in fields dominated by men. We also studied how the labour market is prepared to receive
them. During the research the values brought by women into the technology industry were defined,
as well as the policies of technology companies related to their presence. We have also verified the
thesis about increased employment of women by the innovative sector of industry in the recent
years and their larger presence in companies’ management.
The Women’s Potential report is a pioneering work in Poland and constitutes completion
and extension of efforts made by Perspektywy Education and Siemens Poland
Its objective is a complex analysis of the conditions relating to the choice of technical and scientific education path by women, their
aspirations and expectations, as well as realisation of these aspirations on the labour market. During
this year-long project we analysed the issue of why young women do or do not choose technical
and scientific studies (from the STEM area), how they evaluate their preparation to build a career in
the technology industry, how well they do at technical HEIs, their approach to studying and further
activity in fields dominated by men. We also studied how the labour market is prepared to receive
them. During the research the values brought by women into the technology industry were defined,
as well as the policies of technology companies related to their presence. We have also verified the
thesis about increased employment of women by the innovative sector of industry in the recent
years and their larger presence in companies’ management.
The Women’s Potential report is a pioneering work in Poland and constitutes completion
and extension of efforts made by Perspektywy Education and Siemens Poland
Applying Educational Technology to Higher Education in Vietnam Opportunities ...ijtsrd
Industry 4.0 is happening at a very fast pace, with many impacts on Vietnamese education, both advantages and disadvantages. Therefore, big programs such as investing in modern infrastructure, information technology and communication training people who are dynamic, independent, creative, capable of integrating well to start their businesses are becoming urgent requirements to develop countries. In particular, training labor force to meet the requirements of development and integration of the society is at the heart of development strategies that every country must pay attention to. Therefore, higher education is more and more focused and improved in Vietnam these days. This paper discusses educational technology that has been applied in Dong Nai Technology University DNTU , which is known as one of prestigious universities in the south of Vietnam. It is expected that innovations in educational technology would facilitate students to develop themselves and make a great contribution of human resources to the society although those innovations have brought opportunities and challenges to Vietnamese universities in general and to DNTU in particular. The authors also propose recommendations to Vietnamese policy makers in terms of higher education. Huynh Nhu Yen Nhi "Applying Educational Technology to Higher Education in Vietnam: Opportunities and Challenges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38387.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/38387/applying-educational-technology-to-higher-education-in-vietnam-opportunities-and-challenges/huynh-nhu-yen-nhi
Promoting an Institute: An essential obligation for Technical Education Evolu...Prashant Mahajan
Purpose:Technical education in India contributes a major share to the overall education system and plays a
vital role in the social and economic development of the nation. Despite of rapid growth of technical
education in last decade in terms of the no. of institutes and intake capacity in India, institutes failed to
attract enrollments. Last three years saw, increasing gap in between the actual no. of enrollments and intake
capacity; 46% of seats were vacant in Technical Education in India in 2015. The purpose of this paper is to
highlight institute’s role in promoting enrollments in Technical education.
Design methodology: A qualitative research by a survey (through a structured questionnaire) of students
who are presently enrolled (Current-students) and those who have completed their study (Alumni) belonging
to the institutes offering Technical Education situated in Khandesh region of India and affiliated to the
North Maharashtra University, Jalgaon.
Findings: The study found that diversified characteristics of enrollments are related with the promotion mix
of TE institute in selection of technical educational institute. This study investigates the usefulness of school
visits, institution publications, websites, campus visits, word-of-mouth (friends, alumni, school teachers),
advertisements (radio, television, magazines) and events on campus, as a tool of promotion. Social
Networking and Institute’s Website are the new forms of promotion mix in selection TE institute in rural
part of India.
Research limitations: The survey is delimited to the enrollments of technical education belonging to North
Maharashtra University, Jalgaon and located in Khandesh region of India.
Practical implications
60-70% of population belongs to rural part of India. Different promotional strategies of promotion mix can
be used based on geographic and demographic segmentation. This will enhance, making awareness,
fondness regarding Technical Education in the rural part and will act as lubricant in decision making of
selecting their technical educational institute.
Keywords: Enrollments, Segmentation, Promotion Mix, Technical Education.
Can Technological, Organizational and Individual Antecedents Together Optimiz...Dr. Amarjeet Singh
Faculty members’ are the intellectual leader for
developing societies. It is believed that the new knowledge
is created and transferred to the people in the Universities.
Although, relatively still an infancy field of research,
studies in Knowledge Management (KM) and Knowledge
Sharing (KS) continue to be on the boost. Knowledge
Sharing and Innovation are also whispered to be interrelated and could influence organizational performance.
Studies show that individual’s knowledge does not renovate
simply into institutional knowledge even with the use of
knowledge depository. Furthermore, it is also believed that
Information and Communication Technology (ICT) can
enhance knowledge sharing with the integration of
individual behaviour and diverse organizational factors. As
a comparatively new field of research, studies on
knowledge sharing based on Information Systems (IS) in
developed countries is also on the increase. Unfortunately,
knowledge sharing research in the higher academic
institutions in developing countries were mostly found to be
given trivial considerations. Therefore, the aim of this
study is to investigate whether the technological,
organizational and individual factors together can help
increase Knowledge Sharing in HEIs and contribute it in
augmenting organizational performance in developing
countries. The methodology of this study was
subjective/argumentative i.e., idea generation in
Information Systems (IS). The findings of the study reveal
that utilizing the technological, organizational and
individual antecedents together for organizational
knowledge sharing can augment overall organizational
performance. The study explored the antecedents that
increased innovation in organizations. These were the
individual intention, attitude, self-efficacy for training and
development, subjective norm, organizational trust,
leadership, organizational rewards, organizational culture,
social network, and use of ICT. It also reveals that KS
could be increased in the organizations utilizing selecting
and initiating proper antecedents for practicing KS. We
desire to extend this study to further an empirical
investigation on the same issue to validate the research
results.
This report report from Brookings, with Rockefeller Foundation support, shows that building up a region’s advanced industries is one such possibility with enormous potential. These industries not only create good jobs within the industry, but also up and down their massive supply chains. These jobs provide higher wages and greater opportunity to low and middle-income workers adversely affected by the economic recession.
October 2011 - Corporate Distance EducationFGV Brazil
FGV Online Magazine - October 2011
Corporate Distance Education - Converging professional growth and company goals
FGV Online website: http://www.fgv.br/fgvonline
Design of Success Criteria Based Evaluation Model for Assessing the Research ...Waqas Tariq
Innovations and inventions are not outcomes of single activity of any organization. This is a result of collaboration of different partners. Collaborated research of university and industry can enhance the ability of scientist to make significant advances in their fields. The evaluation of collaborated research between university and industry has created the greatest interest among the collaborational researchers because it can determine the feasibility and value of the collaboration. This paper intends to illustrate the evaluation metrics and success criteria- based evaluation model in between university-industry in their collaborated research. For bridging the model, the success criteria have been identified based on key evaluation metrics. A successful Collaboration of university and industry is not dependent on any single metric but instead on the confluence of multiple metrics from the growth of basic research to commercialization. This study is intended to provide different evaluating metrics to impound the research collaboration constraints between university and industry, and design success criteria to upsurge the successful linkage. For this purpose we have developed constraints and success criteria based evaluation metrics (CASEM) model. The proposed model is appropriate for almost all types of collaborations specially research collaborations between university and industry. By adopting this model, any university or industry can easily cross the threshold in the grown-up research collaborational community.
Applying Educational Technology to Higher Education in Vietnam Opportunities ...ijtsrd
Industry 4.0 is happening at a very fast pace, with many impacts on Vietnamese education, both advantages and disadvantages. Therefore, big programs such as investing in modern infrastructure, information technology and communication training people who are dynamic, independent, creative, capable of integrating well to start their businesses are becoming urgent requirements to develop countries. In particular, training labor force to meet the requirements of development and integration of the society is at the heart of development strategies that every country must pay attention to. Therefore, higher education is more and more focused and improved in Vietnam these days. This paper discusses educational technology that has been applied in Dong Nai Technology University DNTU , which is known as one of prestigious universities in the south of Vietnam. It is expected that innovations in educational technology would facilitate students to develop themselves and make a great contribution of human resources to the society although those innovations have brought opportunities and challenges to Vietnamese universities in general and to DNTU in particular. The authors also propose recommendations to Vietnamese policy makers in terms of higher education. Huynh Nhu Yen Nhi "Applying Educational Technology to Higher Education in Vietnam: Opportunities and Challenges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-2 , February 2021, URL: https://www.ijtsrd.com/papers/ijtsrd38387.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/38387/applying-educational-technology-to-higher-education-in-vietnam-opportunities-and-challenges/huynh-nhu-yen-nhi
Promoting an Institute: An essential obligation for Technical Education Evolu...Prashant Mahajan
Purpose:Technical education in India contributes a major share to the overall education system and plays a
vital role in the social and economic development of the nation. Despite of rapid growth of technical
education in last decade in terms of the no. of institutes and intake capacity in India, institutes failed to
attract enrollments. Last three years saw, increasing gap in between the actual no. of enrollments and intake
capacity; 46% of seats were vacant in Technical Education in India in 2015. The purpose of this paper is to
highlight institute’s role in promoting enrollments in Technical education.
Design methodology: A qualitative research by a survey (through a structured questionnaire) of students
who are presently enrolled (Current-students) and those who have completed their study (Alumni) belonging
to the institutes offering Technical Education situated in Khandesh region of India and affiliated to the
North Maharashtra University, Jalgaon.
Findings: The study found that diversified characteristics of enrollments are related with the promotion mix
of TE institute in selection of technical educational institute. This study investigates the usefulness of school
visits, institution publications, websites, campus visits, word-of-mouth (friends, alumni, school teachers),
advertisements (radio, television, magazines) and events on campus, as a tool of promotion. Social
Networking and Institute’s Website are the new forms of promotion mix in selection TE institute in rural
part of India.
Research limitations: The survey is delimited to the enrollments of technical education belonging to North
Maharashtra University, Jalgaon and located in Khandesh region of India.
Practical implications
60-70% of population belongs to rural part of India. Different promotional strategies of promotion mix can
be used based on geographic and demographic segmentation. This will enhance, making awareness,
fondness regarding Technical Education in the rural part and will act as lubricant in decision making of
selecting their technical educational institute.
Keywords: Enrollments, Segmentation, Promotion Mix, Technical Education.
Can Technological, Organizational and Individual Antecedents Together Optimiz...Dr. Amarjeet Singh
Faculty members’ are the intellectual leader for
developing societies. It is believed that the new knowledge
is created and transferred to the people in the Universities.
Although, relatively still an infancy field of research,
studies in Knowledge Management (KM) and Knowledge
Sharing (KS) continue to be on the boost. Knowledge
Sharing and Innovation are also whispered to be interrelated and could influence organizational performance.
Studies show that individual’s knowledge does not renovate
simply into institutional knowledge even with the use of
knowledge depository. Furthermore, it is also believed that
Information and Communication Technology (ICT) can
enhance knowledge sharing with the integration of
individual behaviour and diverse organizational factors. As
a comparatively new field of research, studies on
knowledge sharing based on Information Systems (IS) in
developed countries is also on the increase. Unfortunately,
knowledge sharing research in the higher academic
institutions in developing countries were mostly found to be
given trivial considerations. Therefore, the aim of this
study is to investigate whether the technological,
organizational and individual factors together can help
increase Knowledge Sharing in HEIs and contribute it in
augmenting organizational performance in developing
countries. The methodology of this study was
subjective/argumentative i.e., idea generation in
Information Systems (IS). The findings of the study reveal
that utilizing the technological, organizational and
individual antecedents together for organizational
knowledge sharing can augment overall organizational
performance. The study explored the antecedents that
increased innovation in organizations. These were the
individual intention, attitude, self-efficacy for training and
development, subjective norm, organizational trust,
leadership, organizational rewards, organizational culture,
social network, and use of ICT. It also reveals that KS
could be increased in the organizations utilizing selecting
and initiating proper antecedents for practicing KS. We
desire to extend this study to further an empirical
investigation on the same issue to validate the research
results.
This report report from Brookings, with Rockefeller Foundation support, shows that building up a region’s advanced industries is one such possibility with enormous potential. These industries not only create good jobs within the industry, but also up and down their massive supply chains. These jobs provide higher wages and greater opportunity to low and middle-income workers adversely affected by the economic recession.
October 2011 - Corporate Distance EducationFGV Brazil
FGV Online Magazine - October 2011
Corporate Distance Education - Converging professional growth and company goals
FGV Online website: http://www.fgv.br/fgvonline
Design of Success Criteria Based Evaluation Model for Assessing the Research ...Waqas Tariq
Innovations and inventions are not outcomes of single activity of any organization. This is a result of collaboration of different partners. Collaborated research of university and industry can enhance the ability of scientist to make significant advances in their fields. The evaluation of collaborated research between university and industry has created the greatest interest among the collaborational researchers because it can determine the feasibility and value of the collaboration. This paper intends to illustrate the evaluation metrics and success criteria- based evaluation model in between university-industry in their collaborated research. For bridging the model, the success criteria have been identified based on key evaluation metrics. A successful Collaboration of university and industry is not dependent on any single metric but instead on the confluence of multiple metrics from the growth of basic research to commercialization. This study is intended to provide different evaluating metrics to impound the research collaboration constraints between university and industry, and design success criteria to upsurge the successful linkage. For this purpose we have developed constraints and success criteria based evaluation metrics (CASEM) model. The proposed model is appropriate for almost all types of collaborations specially research collaborations between university and industry. By adopting this model, any university or industry can easily cross the threshold in the grown-up research collaborational community.
This study focuses on determining a working ‘selection criteria model’ that will help Information
Technology (IT) companies choose the right candidates to work on their IT projects in areas such as system
design, requirement gathering and management,
The Applied Model - A new model for a new era of Graduate EducationMichael Locke
There is a fierce global debate about the value and future of universities.
While there is a myriad of opinions arguing for how universities should change. Few address the issue from the perspective of a student and fewer still seek to design solutions which optimise for student outcomes.
Taking a “student first” perspective, this deck provides a summary of a comprehensive white paper on the subject which can be found here: https://www.locke.com.au/applied-model/
CORPORATE SOCIAL RESPONSIBILITY AND EDUCATION SECTOR: ISSUES AND REMEDIES IAEME Publication
Today, education faces the rising challenges of standardized testing, strained budgets, teacher retention, and global workforce competition. Businesses have begun to take a more targeted approach in their corporate social responsibility programs and are seeking to impact areas that have a correlation with their own business goals. For many businesses, education is an important part of their plans, since the needs exist in all geographic areas, across all subject areas, and for all kinds of people. Higher educational institutions in the Marathwada seek to get quality and talented students. For the perception of higher educational institutions as quality institutions, it is essential that they behave in a socially responsible manner. Corporate social responsibility (CSR) is one of the useful tools to positively affect society and develop relationships with stakeholders. So this paper explains prospects and challenges on both the social and corporate managerial perspective. This study tries investigates the role of educational institutions to surpass the CSR for creating best human capital and also explores the significances of CSR for promoting education and various initiatives of companies in education sector as a corporate responsibility to expansion education
American Journal of Multidisciplinary Research and Development is indexed, refereed and peer-reviewed journal, which is designed to publish research articles.
Running head EDUCATION1EDUCATION 3Educati.docxsusanschei
Running head: EDUCATION 1
EDUCATION 3
Education
Name
Institution
The US education system has come under a lot of criticisms because of the gap that exists between the curriculum and the expectations of employers in the market (America Institutes for Research, 2013). As a business owner, I support an increased focus on professional and technical training. The current economy demands complex knowledge, which means the current workforce should be highly trained workers (America Institutes for Research, 2013). The demands of the current economy cannot be compared to what was required in the past. There is a necessity for change in the education system to ensure that the suitable graduates churned out every year. Document Set 2 shows that there are 3.3 million job opportunities in the United States. Most of these jobs go for over month without being filled. It is a confirmation that the problem is the gap between what is taught and what is needed in the market. The information has been obtained from White House Job Council, which is a government controlled site. The information is backed by extensive research.
Research has discredited the myth that there is a job shortage in the country. There are many industries that have created jobs that require individuals with the appropriate training and education. Therefore, the problem is the lack of a strong connection between what is taught in school and the economy. There is a need to increase focus on the current curriculum to ensure that students are taught what exists in the market. A collaboration between higher learning institutions and employers is necessary to ensure that new graduates possess skills relevant to the demands of the current economy.
Technology has become an essential part of many industries, which explains the increased demand for professional and technical skills (Edmonson, 2005). Change is necessary to ensure that increased focus is given to technical education (Clagett & Nguyen, 2014). There is the option of creating a curriculum that instills the values obtained from liberal arts and technical education to help train versatile graduates.
As a business owner, I will take the following steps to clarify this information:
· Conduct an extensive research to determine what is required in the current job market.
· Discuss the issue with my employees and colleagues to get their views on the issue.
· Develop a recommendation paper that can be used by institutions of higher learning to show what is needed in the current job market.
Response to Discussion
The views presented by the author are supported by facts, which makes it difficult to dispute his/her position. The current economy is in demand for professional and technical skills, which warrants a special focus on technical education. However, many factors that should be considered to explain why there are many job openings that go for months without being filled. Experience, location, and compensat ...
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
The world of search engine optimization (SEO) is buzzing with discussions after Google confirmed that around 2,500 leaked internal documents related to its Search feature are indeed authentic. The revelation has sparked significant concerns within the SEO community. The leaked documents were initially reported by SEO experts Rand Fishkin and Mike King, igniting widespread analysis and discourse. For More Info:- https://news.arihantwebtech.com/search-disrupted-googles-leaked-documents-rock-the-seo-world/
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Discover the innovative and creative projects that highlight my journey throu...dylandmeas
Discover the innovative and creative projects that highlight my journey through Full Sail University. Below, you’ll find a collection of my work showcasing my skills and expertise in digital marketing, event planning, and media production.
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
Attending a job Interview for B1 and B2 Englsih learnersErika906060
It is a sample of an interview for a business english class for pre-intermediate and intermediate english students with emphasis on the speking ability.
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
1. American International Journal of Business Management (AIJBM)
ISSN- 2379-106X, www.aijbm.com Volume 3, Issue 3 (March 2020), PP 08-18
*Corresponding Author: Shivany.S www.aijbm.com 8 | Page
Impediments and Approaches for Faculty and SME Linkage:
Institutional Case Study
Shivany.S
Department of Marketing, University of Jaffna, Sri Lanka
*Corresponding Author: Shivany.S
ABSTRACT: - SMEs are vital contributors to the process of commercialization of new knowledge
discovered by universities. Understanding impediments and approaches for linkages between a Faculty and
SMEs therefore important. The purpose of this Research is to identify the impediments and approaches for the
linkages between management Faculty of Jaffna University, and SMEs of the Northern province, Sri Lanka.
Data were collected using 14 in-depth interviews and 6 focus group discussions with the Students, Staff, and
SMEs. Findings show 10 impediments such as reluctant participation for social contribution, lack of motivation
on social participation, curriculum not encouraging field visits , lack of infrastructure facilities, work overload
with academic activities, instructive methods not facilitated the voluntary social works, lack of awareness
among the staff and students on of community works in the post war context, lack of support from the
administration, immense gap exists between academic community and the business sector ,and negative attitude
towards community participation. This study identified 8 approaches as Altering the pedagogical methods for
students centered learning with industry-based curriculum, Incorporating Field visits for co-creation of
knowledge, Motivating Faculty level centers for Faculty industry linkage, Attitude change programs inducing
self-startup businesses, Inviting stakeholder partners for networking, Outcomes based measures for academic
performance, Introducing awards for best solution-oriented Research works, and Quality led approach for
student involvement.
KEY WORDS: Approaches, Impediments, linkages, Management Faculty, SMEs.
I. INTRODUCTION
Universitiesare increasingly expected to develop links with business community, at the same time,
SMEs need to improve their skills and knowledge base, to develop their competencies and improve the
competitiveness. Universitiesand its Faculties seek link with SMEs for reasons of prestige and possibly access
to sponsors, employment opportunities for their graduates. Hence the link between a Faculty and SMEs may
have been side-lined although they can be beneficial to both sides.
It is suggested that the development of stronger industry links can enable Universitiesto improve the
employability of their graduates. However, it has been identified that academics working with SMEs face
hindrances with existing structures. Simultaneously, SMEs need access to external expertise so that they can
improve their knowledge base their long-term competitiveness. Yet Universitiestend to seek linkages with
larger firms that are more likely to have an extensive knowledge base of their own. Increased collaboration
between SMEs and Universitiesto improve the employment prospects of their graduates.
The University is a social institution with long history and finished the sequences of the periods, it has
gone through several stage in its growth. While initial considered as an institution with an instruction mission,
the Universitiesfurther adopted knowledge generation purpose as Research. In current years new idea has
emerged that the University is assuming a third mission contributing to society and economic development
more directly, revolving University into profitable University. In today the Faculties which producing human
capital to the society has the full responsibility on their quality output, which seek for employability at supreme
level, but this employability is expected to be searched from the competitive world with global challenges.
At the time when a society facing global challenges ground braking ideas and profitable leaderships
are the important engine for motivating long-term competitiveness, creating jobs, generating renewed economic
growth and advancing human welfare (Volkman, et al, 2009). It is now generally accepted that the novelty and
collaborative linkages are the most important engine for long term competitiveness, and growth of employments
can be driven from the improved collaboration between industry and academia (Etzkowitz et al, 2000). The
triple helix model states that the University can play an enhanced role in invention in increasing knowledge-
based societies (Etzkowitz and Leydesdorff, 2000).
Universitiesare the compounds of indirect and direct employment opportunities, which can be further
enriched by the connection with the external stakeholders, as industrial people. (Klofsten and Joones-Evans,
2000). Universitiescontribute to the Research and development capacity of an economy in different ways as
2. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 9 | Page
creating new knowledge from basic Research, producing specialized human capital or transferring innovation
from academia to industry (Lazzeroni and Piccaluga, 2003). Moreover, in recent years policy makers have
become increasingly interested in boosting that last option via patenting, licensing, by products, firm formation
and other linage methods (Philpott, et al 2011).
Universitiesalso have different scientific specialization (Bonaccorsi et al, 2011). While some
Universitiesspecialize in basic sciences, such as mathematics or physics, others specialize in applied sciences,
such as engineering, others focus on social sciences and humanities. As the result many Universitiesare able to
respond to the different needs of firms operating in different industries. In particular while it has been shown
that Universitiesspecialize in basic sciences tend to establish partnership with firms operating high tech
industries (Laursen, et al, 2011). It has been documenting that Faculties specializing in engineering influence
production and system, while Faculties specializing in business management and other social sciences seems to
be less important in production system but they seem to be more important in business management as
marketing human resources, fiancé, accounting and other trade activities.
Empirical studies conformed the SMEs are prefer to hire graduates, who have impact of innovativeness
of the firms, and hiring if graduate from the management background has significant positive impact upon the
frequency organizational change (Nielsen, 2007). The low demand for the graduates in the private sector
reflects the barriers that restrict the hiring of graduates, but more important is stagnation in terms of technical
and organizational change. When it is realized that almost all knowledge relevant for innovation has tacit as
well as codified elements, it become obvious that the flow of graduates into industry is the most powerful
mechanism through which knowledge creation at Universitiescan contribute to innovation in business
(Brundenius et al, 2009).
The University where it is located facing global challenge which extent will beyond the economy
innovation and entrepreneurship provide a way forward by building sustainable development, creating self-
employment, reducing unemployment, generating renewed economic growth and advancing human welfare
(Volkmann, et al, 2009). This more protuberant role of Universitiesin revolution, the steady diffusion of
collaborative relationships between Universitiesand industries and change in the traditional functions of these
actors have been manufactures in the Triple helix model (Etzkowitz and Leydesdorff, 2000). Triple helix model
states that the knowledge-based organizations can play enhanced role in innovation in increasingly knowledge-
based activities (Etzkowitz and Leydesdorff, 2000). SMEs in Northern Sri Lanka have been recognized as
vehicle for economic development and means to previously disadvantages population. Despite support from the
Government and Non-Government organizations SME sector does not seen live up to expectations by growing
in size and consequently creating much more employment. Cook and Morgan (1993) suggested that regional
development cannot be considered separately form cultural, social and institutional activities. All of these
activities should be taken into account when discussing about regional development. The relations of higher
education institutions with their socio-economic environment have become a topical issue in the literatures on
higher education over the past few years.
Faculties in Universitiesproduce graduates specialized in management or business administration play
a crucial role within the system of research for innovation, transfer knowledge on business administration and
skills dispersal to firms (Archibugi and Flipprtti, 2017). Existing higher education doesn’t duly take into
account the type of activities carryout in the linkage with the SMEs. One of the reasons behinds these facts that
the undergraduates are not trained or exposed to be self-starter for new ideas. Existing curriculum of the
Faculties in many Universitiesallows undergraduates to partake on the industrial training at firms at last
semester of the degree programme. Few undergraduates tend to work in private sector most of them prefer to
work at government institutions. Reason for this attitude, is that they have not been allowed to link with the
industries since their entrance to the University. In other words, the knowledge produced by the Universitieshas
soft nature (Stein, 2002). In order to use this knowledge, reading scientific publications or academic patent is
not enough. rather direct interactions with the Faculty staff is required. In addition, as noted above developing
such knowledge required dedicate and Research centers, which constructed by the Faculties force the choices of
future Research areas, with SMEs.
From this above view as same as Pava and RossiLamastra (2013) suggested that future studies on the
performance of University industry linkage might make a first step to fill this gap by explorative in nature to
understand the barriers and identify the system methods for linkage. Van den Bosch and Van Prooijen (1992)
recommended in order to better understand a national culture consequence on competitive advantage through
the synergy linkage between Faculties and SMEs should be studies for institutional perspective in a specific
context.
Much of the Research in this area of linkages between University and SMEs has been biased towards
the University view point, that it how the University Researchers can overcome institutional barriers that inhibit
them from working across the University -SMEs sector. Present study tries to fill this gap via understanding the
constraints and approaches for having Faculty SME linkage.
3. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 10 | Page
II. LITERATURE REVIEW
Linkage is defined as channels through which enterprises influences each other’s economic
performance, between large and small companies are crucial to the success of a market economy. University
can play an enhanced role in innovation in increasingly knowledge -based societies through forming direct links
with industry to maximize capitalization of knowledge, and that academia should closely integrate with the
industrial world (Etzkowitz and Leydesdorff, 2000). Universities are the sources of knowledge that lies at the
frontier of technological possibilities and translate into new opportunities for the benefits of Universities via
interacting with industries (Acs, et al, 2009).
Institutional support is must for recovery of any country (Hall and Johns, 1999; Acemoglu, Johnson
and Robinson, 2001). University participation in community development is must for economy recovery of the
affected community (Gough, 2007), where the academicians are expected to actively engage with the business
development of the society, and to do many collaborative applied Researches works with the stakeholders of the
business sector (Brindis, Ralph, Spertus, and John, 2006).
The triple helix model explains the interactions among University industry and government, the three
equal interdependent institutional spheres are said be the source of innovation and development (Esham, 2008).
The industry considered linkages as important for enhancing success in terms of bringing student closer to the
industry. The Faculty members of Universities consider consultancy and Research arrangement more important
than the other linkage activities in training and educational activities. (Vaaland, nd Ishengoma, 2016). The
quality of teaching judged by the quality of learning that takes place outside the classroom (David, Paul, Kira,
and Marrisa, 2008). It allows the students to gaining access to basic knowledge (Caloghirou, et al, 2001; Feller
2005). However specialized Faculties in Universities are also the providers of solutions to administrative
problems that firms face in their daily work.
Indeed, Universities are increasingly active in related to entrepreneurship and commercialization
activities include consulting contracts with firms (Rentocchini, et al, 2011), for the solution of complexed
problems, which require advanced knowledge and specialized skills that firms often do not have in house.
Linkage between SMEs allow the Faculties to access a wide network of potential future partners within
academia. Academic Researchers certainly work very closely with each other, and uphold strong links with
Researchers interested in similar topics in other national and international Universities and very few works
with SMEs (Murray, 2002).
The work by Seppo and Lilles (2012) has recognized that various types of collaborations exists and has
identified eight types: curriculum development; and delivery; lifelong learning; student mobility; academic
mobility; commercialization of R&D results; collaboration in R&D; entrepreneurship; and Governance (Davey
et al, 2011).
Poter’s cluster or diamond model (1990), and the triple helix model of the University, industry
government interactions developed mainly by henry Etzkowitz and Loet Leydesdorff (1997,1998,2000). The
first level of made up of the industrial clusters within the country (producers, buyers and suppliers), the second
level consist of a set of institutions and organizations which supports the learning process in industrial clusters.
These institutions include Universities financial institutions, physical infrastructures and technological support.
The final level is the set of policies that stimulate the learning processes between industrial clusters and
institutions. National Innovation System (NIS) theory was introduced by freeman (1987), and Lundvalli(1992),
University , industry and government are identified as the main pillars of the innovation system including NIS ,
Triple helix model, and Porter’s diamond model.
Lee (1996) found that Universities view that value of collaboration highly if it resulted in upgraded
infostructure and grants for Faculty members. A further benefit could be formation of spin-off companies that
financially benefit Researcher and University (Liu and Jiang, 2001). Decter et al (2007) identified a list of
factors that motivate University business transfer of technologies. The main ones are loyalty programmes,
support to business, good publicity for the University, financial support, recruitment and retention of staff.
Others include: enhancement of teaching, job offers for graduates, and also creating an entrepreneurial culture
in their institutions (Rene and Heinrich, 2006). Funding cuts or decrease in funding by ministry of education
could be potential external driver for the University to seek outside funding and as the consequences collaborate
with industry (Laukkanen, 2003).
Further access to new ideas and technologies, that creates competitive advantages, reduction in, their
own R&D, greater speed to market with new technology, recruitment, and retention of staff, and access to
highly specialized University facilities (Decter, et al, 2007, Fritas et al, 2007, Dooley and Kirk, 2007).
Availability of efficient linkages policy framework in Universities, lack of in house R&D facilities , and the
shortening product life cycle, access to the Universities physical facilities ,experience of staff, access to the
Research and consultancy services, improved public image in the society, improving sales and profitability,
increase qualification level of employees, creating awareness culture to the institutions, gaining technical
4. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 11 | Page
knowledge, recruiting graduates, and quality improvements are considered as the approaches of Faculties and
SMEs for enhancing the linkages(James and Casey, 2004;Lee and Win, 2004;Radas, 2005).
Improvements in linkages processes include the availability of an appropriate organizational structure,
process and contexts within the University is crucial in order to channel academic R&D towards exploitation
(Debackere and Veugelers, 2005). Decentralization is crucial; Universities require sufficient autonomy to
develop Research policies and relationship with companies. This issue is also very important inside the
University for developing relations with industry (Debackere, and Veugelers, 2005). Government policies can
encourage companies to develop partnerships with Universities for example proving tax incentives and funding
program that requires industries to work with Universities as condition of their funding (Rynes et al, 2001).
Huggins and Johnston (2009), suggested that Universities can be regarded as key sources of
knowledge that can be used in the pursuit of economic growth, especially so given the importance of knowledge
commercialization and transfer activities in the University sector. The literature supports this perspective and
see this linkage as important in order for SMEs to staff technically ahead (Hendry, et al, 2000; Bougrain and
Haudeville, 2002; VanLooy et al, 2003; Hadjimonalis, 2006) however there are those who questions the
effectiveness of Universities as the source of innovation for SMEs (Hoffman, et al, 1998).
The links between Universities and SMEs have been encouraged by policy makers in many countries
(Lambert, 2003; Sainbury, 2007). The literature not only argues that these links are needed for technological
reasons (Hendry et al, 2000;Bougrain and Haudeville, 2002;Van Looy et al 2003;Hadjimanolis, 2006), but also
the effectiveness of the Universities as the source of technology is questionable (tang et al, 1996;Hoffman et al,
1998).However Tether and swann (2003) demonstrated that there are many links that can exists between
Universities and industry, including Research collaborations and graduate employment (jones et al, 2011).
Impediments identified from the past studies include informal and cultural barriers between Universities and
SME sector, and insufficient rewards for Faculty industry linkage, such as credit towards tenure and promotion
(Lee, 1996; Siegel et al, 2004; Dooly and Kirk, 2007). Lack of understanding between Universities and SME
via scientific norms and environment; bureaucracy and the inflexibility of University administration and
insufficient resources devoted to linkages by Universities (Siegel et al, 2004). University institutional rigidity,
fragmented organizations, and the lack of mutual trust between firms and Universities have been found to limit
University industry interactions in developing countries (Bouhamed et al 2009; Singer and Peterka, 2009).
III. RESEARCH OBJECTIVES
1. To Find out the Impediments of Faculty and SME linkage
2. Proposing the approaches for Faculty and SME linkage
IV. METHODOLOGY
The model of the Research is inductive. The present study focused on the qualitative methodology,
Institutional case study to understand Impediments and approaches for the linkage between the Faculty of
Management Studies and Commerce of the Jaffna University and SMEs of Northern Province. Purposive
sampling methods was used to collect primary data from 20 staff, and 40 final year students, and 30 SMEs
(Table 1). SMEs were selected from the list of Northern chambers of industries, Researcher selected the
participates, those who were willing to link with the management Faculty. Secondary data were collected from
the institutional documents, and primary data were collected using 5, 3, 6 in-depth interviews with staff,
students and SMEs respectively and 2, 2, and 2 focus group discussions with the staff, students, and SMEs
respectively. Data were collected and digitally recorded, and coded in the computer with the help of the NVIVO
(version 09) software. Secondary data were collected from the institutional documents, Journals and Books.
TABLE 1: DEMOGRAPHIC PROFILE OF THE RESPONDENTS
Respondents Male Female Total
Staff 09 11 20
Students 22 18 40
SMEs Micro
12
Small
10
Medium
8
Total
30
Data collection
The data collection included both semi structures interviews and focus group discussions. Tailored
semi structured field guides were developed for each type of staff, student and SMEs interviews. Each data
collection guide included the problems related to the linkage between SMEs and academicians and
undergraduate of the Faculty. Author did the interview with the staff and students of the Faculty, and SMEs.
Interviews lasted approximately one hour were conducted in academic setting, and were audio recorded and
later transcribed. Field notes were taken to describe the interview context. The analytic framework applied
5. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 12 | Page
consisted of the following; data management, data display, data reduction, drawing conclusion, and verifying
conclusions. This Research used the Nvivo 09 to analysis the data.
Data analysis
Data analysis involved which involves analyzing textual data closely in order to identify key concepts
and underlying process, guided the data reduction and analysis process (Strauss & Corbin 1998). The data
reduction process began with “open coding,” which consisted of closely examining the data in order to identify,
describe, and develop emerging concepts. For this set of analyses, passages that described how data were used
to identify the Impediments and approaches for management Faculty and SMEs linkage and were identified in
the text and labelled with the code, “linking data to impediments”, and “approaches”. Comments were made to
describe and define the code. This helped ensure that its meaning and its application were used consistently
throughout the analysis. The coding process began on paper, and later, using the QDA software, codes and
comments were electronically recorded.
Axial coding, the next step in the data reduction process, involved making connections between
concepts in order to refine emerging categories and develop explanations related to how academicians,
undergraduates can be linked with SMEs (Strauss & Corbin 1998). All text coded as “Impediments” and
“Approaches” were reviewed to gain further insight into constraints on linkage activities. A report was
generated using the QDA software that consisted of the passages of text coded as “Impediments and
Approaches” along with the associated comments.
The data demonstration, review and drop steps were closely connected at this point of the analysis.
Using the QDA report, conditions were created to describe the different ways academics, undergraduates and
SMEs can be linked. Records matrices are ordered tables that display and organize data to readily identify
patterns. Passages of text that described similar ways of linking academicians, undergraduates and SMEs were
automatically censored and fixed into a data matrix. The consequential data conditions exposed that the code
labelled “Impediments” and “Approaches” described 08 discrete ways, the academicians and undergraduates,
and SMEs can be linked and 10 as impediments for these linkages. These findings were written up in a
“memo,” a document used to record and make sense of emerging patterns, meanings, or ideas related to the
phenomena of interest (Patton, 2002).
Descriptive codes
The development of descriptive codes was based on the response’s academics, students and SMEs. For
this purpose, this Research used NVivo, the computer assisted software for qualitative data analysis. Data
analysis of the study began with reviewing all text line by line, and then code/labels were assigned to the words,
sentences and paragraphs in the texts. The data collected from academics, students and SMEs helped in
constructing 27, 23, 1nd 24 descriptive codes respectively (Refer Table No 2 below).
TABLE 2: DESCRIPTIVE CODES STAFF, STUDENTS, AND SMEs
Staff Students SMEs
Lack of motivation Boring passive learning Interactive mechanism
Financial assistants Practical assignments Consultation by staff
Proper channels Few academics give case
studies
Social network creation
No system Knowledgebase University government link in
industry development
Internal conflicts Industrial training University industry partnership
Infrastructure facilities Systematic methods Student projects
Continuous assessment Assignment exams On the job training to students
Curriculum revision New teaching methods Training at the Faculty
Active student learning No practical exposure Transforming management
knowledge
Conducive environment Stakeholder participation Consultation by students
Motivation to staff Self-learning Success story telling at lecture
halls
Academic training Faculty interaction Business plan preparation
Inactive units Student industry partnerships Joint Research
Faculty interactions Awards scheme Research awards
Negative attitude Field visits Practical thesis for solution
6. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 13 | Page
Altering the pedagogical
methods
Case study analysis Student centered learning
students centered learning Practical assignments Student business partnerships
Social network creation Co-creation of knowledge New pedagogical methods
self-learning: Networking system Co-creation of knowledge
practicing knowledge Automatic process Participation of industry in quality
assurance mechanism
Field work for creation of Inactive cells Consultation for curriculum
development
Student business partnerships Knowledge on private sector Attitude change in private sector
employment
community interaction Negative attitude On field experience
risk-taking in privatization Outcome based measures Field experience
Service quality assurance Initiating cell
Diversified networking
Outcome based academic
measures
Critical solutions for real case
studies
The next stage of data analysis is to reduce these descriptive codes via repackaging and combining the
data to develop groups. Classifying helps a Researcher organize and group similar codes into categories or
families based on similar characteristics (Saldana, 2008). At this stage, the long list of descriptive codes would
be reduced through refining, merging and integrating to categories based on their similarities and the way the
respondents interpret them (Saldana, 2008). Refer to Table No 3 below for the categories that were developed in
this study.
TABLE 3: CATEGORIES LINKING ACADEMICS, STUDENTS AND SMEs
Academics Students SMEs
Pedagogical methods Exposure from Enterprises Solution oriented Research
works
Student centered learning Training throughout the year Field experience for learning
Outcome based measures Case study analysis Filed experience for teaching
Social network creation students centered learning Consultation for curriculum
development
Co construction of Curriculum Social network creation for self-
learning
Social network creation
Diversified network facility Field work for creation of knowledge empowering cells for links
SMEs
Attitude change Field work for practicing knowledge Internship training as lesson
learning
Student business partnerships attitude change New teaching methods
Service quality assurance Case study analysis Attitude change
Stakeholder feedback Student business partnerships Active student learning
environment
Student business partnership Co-creation of knowledge Industry based curriculum
Themes: Process of identifying categories resulted 33 new ideas as how academics, students and SMEs can be
linked. After developing categories, the next step was to reduce 08 categories further through identifying
patterns among categories and then developing higher level abstractions (themes) (Refer Table No 4 below).
7. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 14 | Page
TABLE 4: IDENTIFIED THEMES AS APPROACHES FOR THE FACULTY SMEs LINKAGES
Approach 1 Altering the pedagogical methods for students centered learning with industry-
based curriculum
Approach 2 Incorporating Field visits for co-creation of knowledge
Approach 3 Motivating Faculty level centers for Faculty industry linkage
Approach 4 Attitude change programs inducing self-startup businesses
Approach 5 Inviting stakeholder partners for networking and student leadership
Approach 6 Outcomes based measures for academic performance
Approach 7 Introducing awards for best solution-oriented Research works
Approach 8 Quality led approach for student involvement
V. KEY FINDINGS
At the initial coding step, Researcher found 74 initial codes or concepts then at the second stage via
axial coding 33 categories or concepts identified. 08 core categories were identified as approaches. At the
second stage of data analysis 52 initial codes or concepts were developed as the impediments , then this initial
codes have been reduced at the axial coding to categories or concepts were developed and at the final coding 10
core categories were found as the impediments , such as reluctant participation for social contribution, lack of
motivation on social participation, curriculum not encouraging field visits , lack of infrastructure facilities, work
overload with academic activities, instructive methods not facilitated the voluntary social works, lack of
awareness among the staff and students on of community works in the post war context, lack of support from
the administration, immense gap exists between academic community and the business sector ,and negative
attitude towards community participation .This study recommend the Faculty to immediately revise their
curriculum to incorporate the active student participation , introduce innovative teaching and learning methods,
encourage the students for involving business partnerships, regularize the mechanism for implementing
outcome based measures in academic performance.
Students responded that existing pedagogical methods should be changes, to insert the value of
industrial exposure to the students and staff. Traditional teaching methods no longer applicable in the present
teaching and learning environment because the technological change has been flushing up the trends in
traditional education.
“Existing teaching and learning environment is no longer sufficient to us and we need a new method for
learning, learning knowledge and theories in the class room that we feel more traditional and boring to us, we
expect from the teachers, a practical exposure with the new curriculum which has industrial visits as well as
industrial training as the part of each course units.”
[Student Transcript: 8, line 80-85].
Students and staff of the Faculty expect a modification in curriculum, which foster activities involves
the learner center teaching methods, in which students solve problems, answer questions, formulate questions of
their own, discuss, explain and debate or brainstorm during classes. the Faculty needs a cooperative learning, in
which students work in teams on problems and projects of SMEs sector that assure both positive
interdependence and individual accountability: and inductive learning, in which students can first present with
the challenges of SMEs.
The students and academics may be offered training lessons in various SMEs keeping in view of their
specialization. The curriculum of the Faculty should be redesign by incorporation of SME linkages as core
requirements in each subject. For this purpose, opinion of this industry experts cannot be ignored. The dominant
impediments identified in this Research: lack of proper procedures and mechanism to collaborate with the
industry. The absence of University policy and frame work to promote partnership is seen as a major constraint
on the development of the Faculty -industry linkages. Lack of funding from government and other sources to
strengthen Research capacities there is no Research center within the Faculty to carryout Research for the
industry. Lack of motivation has been cited as more series by the staff while student has cited lack of Research
center for collaborative Research work with the industries.
Furthermore, SMEs pursuit for sustainable business, but the Faculty maintain a gap with them, there
are few entrepreneurial activities take place at the Faculty. These activities are limited with the market
opportunities, but SMEs expect a maintainable growth for their business with the relative contribution of
students and academic staff. Students’ willingness to participate in the private sector is very low most of the
students preferred to have government jobs, for this reason they choose their specialization, which provide
them.
8. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 15 | Page
One of the small-scale producers mentioned that
“We look for management people who have responsible amount of industry experience in applied Research
with first degree. Some of them have master degrees are expected to be able to contribute to marketing projects.
they are expected to manage small business with good management skill…they are not willing, but we will pay
them good salary.”
[Transcript: 4, line 10-12]
Concerns were also expressed about the competitive strength and the lack of knowledge on competitive
analysis, and need for professional assistance on competitive advantage strategies.
I don’t think it is perceived as something negative by the customers and the markets, but form our point of view,
coupled with the fact that there is often competitive fight in the market due to lack of proper institutional
support, intermediate events, and value chain we did not reached the market quickly. Customers enjoyed the tail
of the competitors offer (coming from other regions) our products are avoided by the customers, we always loss
our potential market, we don’t know how to compete with the marketing strategies.
[Transcript: 7, Line 100-106]
The lack of understanding is not reserved only for experts in the business service world, but SMEs too.
They have also witnessed an organization see its profits plunge as management tried to install practices, they
had seen in larger organization see its profits plunge as management tried to install practices, they had seen in
larger organizations, trampling over the company’s core SME was or what it needed took place. This led to the
death of dynamism and innovation in as it inadvertently changed to be like everyone.
“Northern Sri Lanka suffered lot due to the prolonged war, which made a mark on the social as well as the
business sustainability. Transformation of live hoods needs to withstand for community development. Micro
marketers are the people who suffered lot due to war and lost their family heads and started micro marketing
activities to fulfill their day to day needs by initiating livelihood income generating g activities as small
business they need to collaborate with academic community of higher education”
(Transcript 5: line 32-36)
Our people working on behalf of the industry are sent to the customer. There are different employees
in our industry. People have to communicate properly to make sure that we still have the control. We prefer to
give trial to the customers but it always fails, customers compare the products of the outside marketers, with the
local marketers, we offer the same quality products at the cheapest price… but they purchase competitive
products at the highest price… we don’t know how to identify the real needs of the customers, we feel that
University specially the management people can do Research for us”
[Transcript: 7, line 72-78].
Staff of the Faculty also expressed that the teaching and learning methodology should be changed to
meet the current needs of the students in the job market. They said that new pedagogical methods should
support the student’s centers learning for industrial exposure. SMEs mentioned that they need solutions from
the professionals, they felt that academicians would give ideas on the different business solutions for their
products. Many small-scale producers expressed they need knowledge transformation from the different
department of the Faculty to make their products best quality.
There are lot of dismissals in our manufacturing plant to produce excellence products, we produce many
products with very good features and at very inexpensive price in the market, distributors asking us to have
more quality products at the affordable rate … it is perceptibly annoying because no one wants the local
branded products we need help to modify with the innovative ides we feel that students and staff in the
University can help us to improve our business in many ways.
[Transcript: 8, Line 16-18]
SMEs mentioned that they need the close supervision of the academic in the Faculty for their
functional activities of their industry.
“If anybody helps me to inform my product and get orders, I can happily continue my business. I
would like to attend seminar in Universitiesto get advice on marketing aspects…. I and other micro level
producers expect help from higher institutions to survive in the market. Because some of the marketers doing
unethical sales to customers, how can we overcome form their activities”
[Transcript: 6, line 23-27]
“Faculty can involve in Research activities to identify the potential market opportunities. Research activities,
linkages with other Universitieswhich involve in SME initiatives. Faculty undergraduates can teach
management concepts and business behaviors which may influence on the SMEs marketing activities”
[Transcript: 12, line 60-64]
9. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 16 | Page
“We cannot change the graduate employment landscape overnight, and we certainly cannot do it
alone. But together we can facilitate positive change in our local communities. Let’s talk openly with course
leaders and academics to ensure employability and soft skills are a focus throughout college and University
education”
[Transcript: 10, line 30-34]
VI. CONCLUSION
Faculty should have linkage with SMEs to gain and share knowledge. Student should be aware of the
importance of field work, and they can share knowledge with the business people to share knowledge on their
experience. Students should change their attitude by experiencing the success stories of SMEs and they have to
be motivated for risk taking in privatization. During the field visits, students should be able to collect the cases
of SMEs and they shall be allowed to present at the lecture discussions.
Academic staff of the Faculty should be encouraged through outcome-based performance, for
instances number of SMEs protected by each staff, number of publications on solving the issues of SMEs,
Number of consultations listed on SMEs, number of participations at the workshops for local business
community. Lecturers must have updated knowledge of industrial setup and management (Marketing, HRM,
Finance, Accounting, Trade, IT) problems faced by different industries. Various institutions like banks, NGOs,
Industries should also sponsor various Research projects conducted by students in order to encourage Research
environment. Faculty should consider quality assurance policing protecting the links between the Faculty and
the business community. Students should be encouraged to have partnership with industries, and they can be
allowed to make profit via collaborative works with SMEs during graduation.
The Research activities should be carried out under the guidance of both industry and academic
supervisors. Students must receive clear directions for their Research studies via the collaboration and the
Research findings can be easily commercialized to the respective SMEs. Further, they intend to have
consultation session for SMEs and other business community on their request. This is a kind of consultancy for
the issues in the organizations and Faculty can earn money in return. The students, who work as the Research
assistants and they will be paid an incentive. Therefore, this activity entirely helping to ensure the survival of
the institution as higher education institution by supporting industrial sector.
Working with business community in groups benefits to all parties. Whether in terms of Research
collaboration, building community relations, being good neighbors or making a positive contribution to the life
of the Faculty, community engagement is important on many levels not only from an ethical consideration of
corporation with community yields rewards to students and community partners alike.
The main effective steps to promote interaction as perceived by academics are improvement of
Research center facilities, encouragement of industrial visits by academics and students and giving publicity to
University activities relevant to industry and setting up of University- industry interaction cells in universities.
It is accepted that both Faculty and SMEs considered that the concerted action of institutions within
country and its social and economic impact beyond specific Research collaboration projects are of great
importance. In this respect, the impact in terms of skill development and enhanced employment opportunities
seem especially relevant and the Faculty wish to be the country wise knowledge hub by gathering and
dissemination Accounting, Human Resource, Marketing, Finance and Commerce related knowledge to the
Nation. Furthermore, the Faculty can consider that the specific outcomes and solutions of collaborative
Research projects are needed to be commercialized for value, to all relevant parties including government,
policy makers, institutions and other external partners. In addition to that, the Research outcomes can be
acknowledged way of Journal publications and appoint Research conferences in order to concern on the
industrial sector as the first priority in every agenda.
REFERENCES
[1]. Acemoglu, D., Johnson, S., & Robinson, J.A., (2001). “The Colonial Origins of Comparative
Development: An Empirical Investigation,” American Economic Review, 91(5), 1369-1401.
[2]. Acs, Z. J., Braunerhjelm, P., Audretsch, D. B., & Carlsson, B. (2009). The knowledge spillover theory
of entrepreneurship. Small business economics, 32(1), 15-30.
[3]. Archibugi, D., & Filippetti, A. (2018). The retreat of public Research and its adverse consequences on
innovation. Technological Forecasting and Social Change, 127, 97-111.
[4]. Bougrain, F., & Haudeville, B. (2002). Innovation, collaboration and SMEs internal Research
capacities. Research policy, 31(5), 735-747.
[5]. Bouhamed, H., Boufi, S., & Magnin, A. (2009). Alumina interaction with AMPS–MPEG copolymers
produced by RAFT polymerization: Stability and rheological behavior. Journal of colloid and
interface science, 333(1), 209-220.;
[6]. Boyce. Mary, E. (2003). “Organizational Learning is Essential to Achieving and Sustaining Change in
Higher Education”, Innovative Higher Education, 28(2), 119-136.
10. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 17 | Page
[7]. Brindis., Ralph, G., Spertus., John. (2006). The Role of Academic Medicine in Improving Health Care
Quality Academic Medicine: 81 (9) 802-806.
[8]. Brundenius, C., Nuñez, J., & Pérez Ones, I. (2009, October). Capacity Building for the Knowledge
Economy: The Cuban Experience (1959-2009). Georgia Institute of Technology.
[9]. Caloghirou, Y., Tsakanikas, A., & Vonortas, N. S. (2001). University-industry cooperation in the
context of the European framework programmes. The Journal of Technology Transfer, 26(1-2), 153-
161.
[10]. Capabilities via University–industry collaboration: an analysis and an assessment. R&D
[11]. Casey Jr, J. J. (2004). Developing harmonious University-industry partnerships. U. Dayton L. Rev., 30,
245.
[12]. Charmaz, K. (2006). Constructing grounded theory: A practical, guide through Qualitative Research.
Sage Publications Ltd, London, 2006.Community Innovation Survey”, a paper prepared for the
“International Workshop on Innovation
[13]. Cooke, P., & Morgan, K. (1993). The network paradigm: new departures in corporate and regional
development. Environment and planning D: Society and space, 11(5), 543-564.Corporate Citizenship,
Vol. 59, September, pp. 92-111.
[14]. Creswell, J. W. (2007). Qualitative inquiry & Research designs (2nd Ed.). Thousand Oaks, CA: Sage.
[15]. Dasanayaka, S. (2009). 'Small and Medium Scale Enterprises in Informal Sector in Pakistan and Sri
Lanka with Research Agenda', IARIW-SAIM Conference, Kathmandu, Nepal.
[16]. David, H., Paul, L., Kira, P., & Marissa, H. (2008). It Takes a Curriculum: Preparing Students for
Research and Creative Work, summer, 2008, Liberal Education, 94(3).
[17]. Debackere, K., & Veugelers, R. (2005). The role of academic technology transfer organizations in
improving industry science links. Research policy, 34(3), 321-342.
[18]. Decter, M., Bennett, D., & Leseure, M. (2007). University to business technology transfer—UK and
USA comparisons. Technovation, 27(3), 145-155.
[19]. Department of Census & Statistics. (2007). 'Annual Survey of Industries', Colombo, Sri Lanka.
Dimensions of job burnout. Journal of Applied Psychology, 81, 123-133.
[20]. Dooley, L., & Kirk, D. (2007). University-industry collaboration: Grafting the entrepreneurial
paradigm onto academic structures. European Journal of Innovation Management, 10(3), 316-332.
[21]. Educating the Next Wave of Entrepreneurs - Unlocking entrepreneurial capabilities to meet the
[22]. Enhancer of Sex-lethal. A. Dros. Res. Conf. 37: 337.
[23]. Esham,M.(2008).Strategies to Develop University-Industry Linkages in Sri Lanka National Education
Commission Sri Lanka Series No 4 (2007/2008)
[24]. Esther Ishengoma, Terje I. Vaaland, (2016) "Can University-industry linkages stimulate student
employability?", Education + Training, Vol. 58 Issue: 1, pp.18-44, https://doi.org/10.1108/ET-11-
2014-0137
[25]. Etzkowitz, H., & Leydesdorff, L. (1997). Introduction to special issue on science policy dimensions of
the Triple Helix of University-industry-government relations.
[26]. Etzkowitz, H., & Leydesdorff, L. (1998). The endless transition: A" Triple Helix" of University-
industry-government relations: Introduction. Minerva, 203-208.
[27]. Etzkowitz, H., & Leydesdorff, L. (2000). The dynamics of innovation: from National Systems and
“Mode 2” to a Triple Helix of University–industry–government relations. Research policy, 29(2), 109-
123.
[28]. Etzkowitz, H., Webster, A., Gebhardt, C., & Terra, B. R. C. (2000). The future of the University and
the University of the future: evolution of ivory tower to entrepreneurial paradigm. Research
policy, 29(2), 313-330.
[29]. European Commission. Directorate-General for Employment, & Social Affairs. Unit EMPL/E.
(2001). Old-age in Europe (Vol. 1, No. 2001). Office for Official Publications of the European
Communities.
[30]. Freeman, W. J. (1987). Simulation of chaotic EEG patterns with a dynamic model of the olfactory
system. Biological cybernetics, 56(2-3), 139-150.
[31]. Gough, D. (2007). Giving voice: evidence-informed policy and practice as a democratizing
[32]. Gough, D. (2007). Weight of evidence: a framework for the appraisal of the quality and relevance of
evidence. Research papers in education, 22(2), 213-228.
[33]. Hadjimanolis, A. (2006). A case study of SME–University Research collaboration in the context of a
small peripheral country (Cyprus). International Journal of Innovation Management, 10(01), 65-88.
[34]. Hall, R., & Jones, C. I. (1999). “Why Do Some Countries Produce So Much More Output per Worker
than Others?” Quarterly Journal of Economics, 114 (1), 83-116.
11. Impediments and Approaches for Faculty and SMES Linkage: Institutional Case Study
*Corresponding Author: Shivany.S www.aijbm.com 18 | Page
[35]. Holger Muent, (1999) "University spin‐offs and local business support infrastructure in a post‐socialist
economy", Journal of Small Business and Enterprise Development, Vol. 6 Issue: 2, pp.128-
138, https://doi.org/10.1108/EUM0000000006675.
[36]. Huggins, R., & Johnston, A. (2009). Knowledge networks in an uncompetitive region: SME
innovation and growth. Growth and Change, 40(2), 227-259.
[37]. Lambert, L. (2003). Leadership redefined: An evocative context for teacher leadership. School
leadership & management, 23(4), 421-430.
[38]. Laukkanen, M. (2003). Exploring academic entrepreneurship: drivers and tensions of University-based
business. Journal of Small Business and Enterprise Development, 10(4), 372-382.
[39]. Laursen, M., Grunnet, M., Olesen, S. P., Jespersen, T., & Mow, T. (2011). Keeping the rhythm—Pro-
arrhythmic investigations in isolated Göttingen minipig hearts. Journal of pharmacological and
toxicological methods, 64(2), 134-144.
[40]. Lazzeroni, M., & Piccaluga, A. (2003). Towards the entrepreneurial University. Local economy, 18(1),
38-48.
[41]. Lee, J., & Win, H. N. (2004). Technology transfer between University Research centers and industry in
Singapore. Technovation, 24(5), 433-442.
[42]. Macduff, N., Netting, F. E., & O'Connor, M. K. (2009). Multiple ways of coordinating volunteers with
differing styles of service. Journal of Community Practice, 17(4), 400-423.HETC. (2012/2015).
Handbook of World Bank project, higher education for twenty first centuryManagement 33, 209–229
[43]. Miles MB, Huberman AM, 1994). Miles MB, Huberman AM. Qualitative Data Analysis. Thousand
Oaks, CA: Sage; 1994
[44]. Peças,P E. Henriques, (2006) "Best practices of collaboration between University and industrial
SMEs", Benchmarking: An International Journal, Vol. 13 Issue: 1/2, pp.54-
67, https://doi.org/10.1108/14635770610644574
[45]. Patton MQ. Qualitative Evaluation and Research Methods. 3. Thousand Oaks, CA: Sage; 2002.
[46]. Patton, M. Q. (2002). Two decades of developments in qualitative inquiry: A personal, experiential
perspective. Qualitative social work, 1(3), 261-283.
[47]. Philpott, K., Dooley, L., O'Reilly, C., & Lupton, G. (2011). The entrepreneurial University: Examining
the underlying academic tensions. Technovation, 31(4), 161-170.
[48]. Piva, E. And Rossi-Lamastra, C. (2013), "Systems of indicators to evaluate the performance of
University-industry alliances: a review of the literature and directions for future Research", Measuring
Business Excellence, Vol. 17 No. 3, pp. 40-54. Https://doi.org/10.1108/MBE-01-2013-0004
[49]. Porter, R. (1999). The Greatest Benefit to Mankind: A Medical History of Humanity (The Norton
History of Science). WW Norton & Company.Posture, 22, 317-321.
[50]. Radas, S. (2005). Diffusion models in marketing: How to incorporate the effect of external
influence. Privredna kretanja i ekonomska politika, 15(105), 30-51.
[51]. Rohrbeck, R., & Arnold, H. M. (2006,). Making University-industry collaboration work-a case study
on the Deutsche Telekom Laboratories contrasted with findings in literature. In the International
Society for Professional Innovation Management Conference, Networks for Innovation, Athens,
Greece.
[52]. Rosenberg, D. R., & Lewis, D. A. (1994). Changes in the dopaminergic innervation of monkey
prefrontal cortex during late postnatal development: a tyrosine hydroxylase immunohistochemical
study. Biological psychiatry, 36(4), 272-277.
*Corresponding Author: Shivany.S
Department of Marketing, University of Jaffna, Sri Lanka