The ATF80 Smart Target flowmeter uses capacitance sensors and digital signal processing to output a 4-20mA signal proportional to flow. It can measure low velocities below 0.1 m/s and high temperatures up to 450°C. Models are available in sizes from 15mm to 6000mm with material options of stainless steel 304 or 316. Configuration options include flange, wafer, insertion, and hot tap installation types.
Alia electromagnetic flowmeter_flange type_amf900 series_waste wateraliagroup
ALIAMAG AMF900 Series is a flange type Electromagnetic Flowmeter ideal for conductive liquids. It comes in sizes from 6 to 2000mm.
The AMF900 is widely used for tap-water, waste water, food & beverage Pulp & Paper and many other applications.
AMF900 Series magmeter could be used in compact or separate model with AMC Series converter of electromagnetic flowmeter
FEATURES
Various liner can be selected that satisfies most industrial applications.
Flow Velocity range:0-12 m/s, with good results for low flow applications
It comes any flanges such as ,ANSI, DIN, JIS ¡etc.
It excellent for high pressure application.
Protection class: IP68 is available,and the sensor can sink into the water.
FEP Liner suitable in vacuum tube.
High accuracy of +/-0.5% of reading(or+/-0.2% of reading)
With Forward/Reverse flowrate measure function.
SPECIFICATION
Pipe Size: 6 - 2000 mm(1/4'' - 80'')
Measureing Range:0 - 0.25 m/s min.
0-12 m/s max.
Explosion Proof: Exd(ib)ibqIIBT5 (with AMC3100 only)
Protection:
IP 68
IP 68 (Submersible)
Ambient Temperature: -25 to +60oC
Temperature:
-10 ~ +60 oC (Polyurethane,PU)
-20 ~ +70 oC (Neoprene)
-40 ~ +180 oC (FEP)
-40 ~ +180 oC (PTFE/PFA)
AC Clamp Meter(with mean value rectification)
Measure the fundamental waveform component using the average rectified methodExpanded -25 °C to 65 °C operating temperature range Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
Drop proof design withstands drop from a height of 1 meter
The Hioki 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots. In addition to AC current measurement, the 328010F clamp meter provides voltage and resistance measurement as well as continuity check functionality. When connected to an optional flexible current sensor, the 3280-10F can be used to measure the current flowing in pairs of wires or in tangled or complexly routed wires around which it was not possible to apply a clamp-on sensor in the past.
Ronex International
“Your Trusted Laboratory Partner.”
47/2, Fazli Rabbi Road, Motijheel, Dhaka-1000. Bangladesh | Cell: +880 1811155717; 01612526665 | E-mail: ronexbd@gmail.com; ronexbd@live.com | Webs: ronexbd.webs.com | Skype: ronexbd | https://www.facebook.com/RonexInternational
Alia electromagnetic flowmeter_flange type_amf900 series_waste wateraliagroup
ALIAMAG AMF900 Series is a flange type Electromagnetic Flowmeter ideal for conductive liquids. It comes in sizes from 6 to 2000mm.
The AMF900 is widely used for tap-water, waste water, food & beverage Pulp & Paper and many other applications.
AMF900 Series magmeter could be used in compact or separate model with AMC Series converter of electromagnetic flowmeter
FEATURES
Various liner can be selected that satisfies most industrial applications.
Flow Velocity range:0-12 m/s, with good results for low flow applications
It comes any flanges such as ,ANSI, DIN, JIS ¡etc.
It excellent for high pressure application.
Protection class: IP68 is available,and the sensor can sink into the water.
FEP Liner suitable in vacuum tube.
High accuracy of +/-0.5% of reading(or+/-0.2% of reading)
With Forward/Reverse flowrate measure function.
SPECIFICATION
Pipe Size: 6 - 2000 mm(1/4'' - 80'')
Measureing Range:0 - 0.25 m/s min.
0-12 m/s max.
Explosion Proof: Exd(ib)ibqIIBT5 (with AMC3100 only)
Protection:
IP 68
IP 68 (Submersible)
Ambient Temperature: -25 to +60oC
Temperature:
-10 ~ +60 oC (Polyurethane,PU)
-20 ~ +70 oC (Neoprene)
-40 ~ +180 oC (FEP)
-40 ~ +180 oC (PTFE/PFA)
AC Clamp Meter(with mean value rectification)
Measure the fundamental waveform component using the average rectified methodExpanded -25 °C to 65 °C operating temperature range Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires
Drop proof design withstands drop from a height of 1 meter
The Hioki 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots. In addition to AC current measurement, the 328010F clamp meter provides voltage and resistance measurement as well as continuity check functionality. When connected to an optional flexible current sensor, the 3280-10F can be used to measure the current flowing in pairs of wires or in tangled or complexly routed wires around which it was not possible to apply a clamp-on sensor in the past.
Ronex International
“Your Trusted Laboratory Partner.”
47/2, Fazli Rabbi Road, Motijheel, Dhaka-1000. Bangladesh | Cell: +880 1811155717; 01612526665 | E-mail: ronexbd@gmail.com; ronexbd@live.com | Webs: ronexbd.webs.com | Skype: ronexbd | https://www.facebook.com/RonexInternational
Gems™ Sensors & Controls is a global manufacturer of customized, application-engineered sensors, controls and solenoid valves. Customers turn to Gems to measure a wide range of physical parameters with both sensors and fluid handling assemblies. With 50+ years of experience in design and manufacturing, Gems delivers precisely what our medical and industrial OEM customers need.
High-pressure valves are being added to the WIKA portfolio of pressure, temperature, level, flow and force measurement. With the acquisition of SAMI Instruments S.R.L. by the WIKA Group is expanding its portfolio of specialty valves. The new portfolio of standard and specialty valves available through WIKA USA includes ball valves, needle valves, check valves, and instrument manifold valves with pressures from 15,000 psi to 60,000 psi. in 1/4" to 1" sizes.
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Gems™ Sensors & Controls is a global manufacturer of customized, application-engineered sensors, controls and solenoid valves. Customers turn to Gems to measure a wide range of physical parameters with both sensors and fluid handling assemblies. With 50+ years of experience in design and manufacturing, Gems delivers precisely what our medical and industrial OEM customers need.
High-pressure valves are being added to the WIKA portfolio of pressure, temperature, level, flow and force measurement. With the acquisition of SAMI Instruments S.R.L. by the WIKA Group is expanding its portfolio of specialty valves. The new portfolio of standard and specialty valves available through WIKA USA includes ball valves, needle valves, check valves, and instrument manifold valves with pressures from 15,000 psi to 60,000 psi. in 1/4" to 1" sizes.
Marechal DS range of industrial power supply and motor connection plugs and sockets provide low voltage distribution, 30amps-250amps. Marechal DS range industrial plugs are the quality standard for manufacturing industry providing the following benefits compliant with International Standard IEC60309-1 and European Standard EN60309-1 (Plugs & Sockets Outlets for Industrial Purposes).
Marechal DS Power Supply and Motor Connection Plugs and Sockets
30amp-250amp current ratings for plugs and sockets
500v-1000v a.c. rated plugs and sockets
IP54/IP55 water and dust tight plug assemblies (IP66/IP67 available)
AC-22 / AC-23 load breaking capability
GRP casings, chemical and IK08 shock resistant
Metal casings, corrosion resistant, IK09 shock resistant
Resistant to temperature changes -40 to +60 Degrees Celsius
Equipped with silver-nickel butt contacts for lifetime reliability
Typical Marechal DS Industrial Plugs Applications - power supply to motor and pump connections, heavy industry, mines and quarries, ship to shore plug connections, gensets, power supply to production lines and manufacturing operations. Marechal DS plugs and sockets range of decontactors is supported by a full line of wall mounting sockets, inclined sockets, coupler sockets, wall mounting appliance inlets and inclined appliance inlets.
Marechal DS Plugs & Sockets Decontactors - The Range
Marechal DS1 Plugs - 30amp
Marechal DS3 Plugs - 50am
Marechal DS6 Plugs - 90amp
Marechal DS9 Plugs - 150amp
Marechal DS2 Plugs - 250amp
Marechal Electric pioneered the use of high performance, silver-nickel butt contacts in electrical plug and socket systems (decontactors), which are now available for applications from simple compact multi-pin to heavy duty 600A plug connections. Marechal technology is used across a range of demanding environments such as the food and drink, nuclear power, heavy industry, infrastructure and ATEX hazardous area sectors. Marechal decontactors are an effective alternative to both hard-wired equipment and pin/sleeve type contacts, the decontactor is a highly flexible method of connecting and disconnecting electrical equipment at the press of a latch – safely. Marechal Electric brought the decontactor, the high performance industrial plug connector with integral AC21 switch, to the electrical market.
Công ty TNHH Kỹ Thuật Công Nghệ Minh Việt là nhà cung cấp các loại đồng hồ đo lưu lượng khí với giá tốt nhất Việt Nam. Chúng tôi đang phân phối đồng hồ đo lưu lượng khí và các loại phụ kiện được nhập khẩu chính hãng từ các nhà sản xuất hàng đầu trên thế giới như Cosmic Technologies (Ấn Độ), Azbil (Nhật Bản), STS (Thụy Sĩ), và Muesen (Đức).
The patented Flow Technology DC-I Series positive displacement flow meters (PD Meter) are ideal for a wide variety of liquid flow applications. These applications include, but are not limited to, paints, resins, petrochemicals, lubricants, fuels, polyurethanes and adhesives. These flow meters are both highly accurate and easily adaptable to most industrial applications.
Beeteco gửi đến quý khách hàng catalog thiết bị điện của thương hiệu Vteke. Catalog chứa đầy đủ thông tin về sản phẩm, kích thước và những lưu ý để sử dụng thiết bị hiệu quả.
=========================================
Beeteco.com@ Công ty TNHH Thương Mại Kỹ Thuật ASTER
Hotline: 0909.41.61.43
Email: contact@beeteco.com
Fanpage: www.facebook.com/beeteco
Địa chỉ: 7/31 KDC Thương Mại Sóng Thần, KP. Nhị Đồng 1, P. Dĩ An, Tx. Dĩ An, Tỉnh Bình Dương.
KEMET Webinar - Extended series for axial electrolytic capacitorsIvana Ivanovska
Learn more about the applications where our combined axial electrolytic capacitors with 80 VDC/high temperature can be used.
Our engineers will speak about the performances of the series
The EL2200 series of electromagnetic flowmeters represent the state of the art for the accurate measurement for water cycle and process applications. This new generation flowmeter utilizes an innovative structure to route the electromagnetic signal generated by the electrodes, providing a flowmeter with an extremely wide measurement range. The new EL Series meters are capable of a measurement range up to 1000:1.
Explore our most comprehensive guide on lookback analysis at SafePaaS, covering access governance and how it can transform modern ERP audits. Browse now!
RMD24 | Debunking the non-endemic revenue myth Marvin Vacquier Droop | First ...BBPMedia1
Marvin neemt je in deze presentatie mee in de voordelen van non-endemic advertising op retail media netwerken. Hij brengt ook de uitdagingen in beeld die de markt op dit moment heeft op het gebied van retail media voor niet-leveranciers.
Retail media wordt gezien als het nieuwe advertising-medium en ook mediabureaus richten massaal retail media-afdelingen op. Merken die niet in de betreffende winkel liggen staan ook nog niet in de rij om op de retail media netwerken te adverteren. Marvin belicht de uitdagingen die er zijn om echt aansluiting te vinden op die markt van non-endemic advertising.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Falcon stands out as a top-tier P2P Invoice Discounting platform in India, bridging esteemed blue-chip companies and eager investors. Our goal is to transform the investment landscape in India by establishing a comprehensive destination for borrowers and investors with diverse profiles and needs, all while minimizing risk. What sets Falcon apart is the elimination of intermediaries such as commercial banks and depository institutions, allowing investors to enjoy higher yields.
Putting the SPARK into Virtual Training.pptxCynthia Clay
This 60-minute webinar, sponsored by Adobe, was delivered for the Training Mag Network. It explored the five elements of SPARK: Storytelling, Purpose, Action, Relationships, and Kudos. Knowing how to tell a well-structured story is key to building long-term memory. Stating a clear purpose that doesn't take away from the discovery learning process is critical. Ensuring that people move from theory to practical application is imperative. Creating strong social learning is the key to commitment and engagement. Validating and affirming participants' comments is the way to create a positive learning environment.
Improving profitability for small businessBen Wann
In this comprehensive presentation, we will explore strategies and practical tips for enhancing profitability in small businesses. Tailored to meet the unique challenges faced by small enterprises, this session covers various aspects that directly impact the bottom line. Attendees will learn how to optimize operational efficiency, manage expenses, and increase revenue through innovative marketing and customer engagement techniques.
Taurus Zodiac Sign_ Personality Traits and Sign Dates.pptxmy Pandit
Explore the world of the Taurus zodiac sign. Learn about their stability, determination, and appreciation for beauty. Discover how Taureans' grounded nature and hardworking mindset define their unique personality.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
Buy Verified PayPal Account | Buy Google 5 Star Reviewsusawebmarket
Buy Verified PayPal Account
Looking to buy verified PayPal accounts? Discover 7 expert tips for safely purchasing a verified PayPal account in 2024. Ensure security and reliability for your transactions.
PayPal Services Features-
🟢 Email Access
🟢 Bank Added
🟢 Card Verified
🟢 Full SSN Provided
🟢 Phone Number Access
🟢 Driving License Copy
🟢 Fasted Delivery
Client Satisfaction is Our First priority. Our services is very appropriate to buy. We assume that the first-rate way to purchase our offerings is to order on the website. If you have any worry in our cooperation usually You can order us on Skype or Telegram.
24/7 Hours Reply/Please Contact
usawebmarketEmail: support@usawebmarket.com
Skype: usawebmarket
Telegram: @usawebmarket
WhatsApp: +1(218) 203-5951
USA WEB MARKET is the Best Verified PayPal, Payoneer, Cash App, Skrill, Neteller, Stripe Account and SEO, SMM Service provider.100%Satisfection granted.100% replacement Granted.
1. Smart Target Flowmeter
Model ATF80 Series
GENERAL
ATF80 Smart Target flowmeters apply new
capacitance sensors to the target flowmeters, process the detected
sensor signal, through digital technique and micro-electric technology,
to 4-20mA output which is proportional to flow.
Smart Target Flowmeters are suitable for low-velocity & high-temp.
gas, steam flowrate. If there is an error of measuring range, you
can only change target for satisfying correct application and it is
no need to change the whole flowmeter.
FEATURES
Can measuring the low velocity less then 0.1 m/s
It's able to measure high-temp., low-press. and low-velocity flare gas.
4-20 mA output Hart communication
Low Pressure lose
The Max. temperature can be up to 450 °C
Powerful Alia software can be online calibration
For large pipeline, use Insertion Type or Hot-Tap Type
SPECIFICATION
Size : 15,20,25,32,40,50,65,80,100,125,150 Local Display : 4 lines LCD (with backlight)
200,250,300……6000(mm) : 5 digit flowrate
Measuring Range : Steam: 0.002 ~ 3400000 Ton/Hr : 8 digit Totalizer
: Gas: 1 ~ 3280000 NM3/Hr Current Output : 4-20 mA 2 wire
: Liquid:0.1 ~ 55800 M3/Hr Load : Rohm=(Vdc-10)*50
Material : Stainless Steel 304 / 316 Alarm Function : High / Low Alarm
Accuracy Turndown Ratio : 15:1
Wafer / Flange Type : +/-0.75% of reading Communication : Hart Signal
Insertion Type : +/-1.6% of reading Data Storage : Operation Parameters and Totalization
Repeatability : +/-0.05%FS figures are stored by EEPROM for more
Multi Flow Range : 1- 3 flow range than 10 years
Process Connection : Flange / Wafer / Insertion Housing Material : Aluminum Alloy
Flanges Type : JIS 10K / JIS 20K / JIS 40K Cable Entry : 2 X M20 * 1.5
ANSI 150# / ANSI 300# / ANSI 600# Power Supply : 10-32 VDC
PN 10 / PN 16 / PN25 / PN 40 Power Effect : ≤0.01% / V
Ambient Temperature : -25 to +70 °C Keyboard : 3 keys from internal for Programming
Temperature Effect : ≤±1% per 50 °C and display control
Max. Pressure : 100 Bar Low Flow Cutoff : 0 to 20%
Working Temperature Damping : 0 to 32 Seconds
Flange / Wafer : -60 to 450 °C Protection : IP 67
Insertion : -60 to 450 °C : Explosion Proof, Exd IIC T6
Hot Tap (Retractable) : -20 to 80 °C : Intrinsically Safe, E ex ia IIC T4
ALIA GROUP INC. URL : www.alia-inc.com
113 Barksdale Professional Center, Newark, DE 19711, USA E-mail :alia@alia-inc.com
TEL : + 1 - 302 - 213 - 0106 FAX : + 1 - 302 - 213 - 0107 ATF80V1.1.8en
®
ALIATARGET
ALIATARGET
2. ALIATARGET Target Flowmeter Model ATF80 Series
FLOW RANGE
0.1m/s to 1.5m/s 1m/s to 15m/s 0.1m/s to 1.5m/s 5.3m/s to 80m/s
15 1/2" 0.06 to 0.95 0.64 to 9.5 0.06 to 0.95 3.4 to 50.9
20 3/4" 0.11 to 1.7 1.1 to 17.0 0.11 to 1.7 6.0 to 90.5
25 1" 0.18 to 2.7 1.8 to 26.5 0.18 to 2.7 9.4 to 141
32 1-1/4" 0.29 to 4.3 2.9 to 43.4 0.29 to 4.3 15.3 to 232
40 1-1/2" 0.45 to 6.8 4.5 to 67.9 0.45 to 6.8 24.0 to 362
50 2" 0.71 to 10.6 7.1 to 106 0.71 to 10.6 37.5 to 565
65 2-1/2" 1.2 to 17.9 11.9 to 179 1.2 to 17.9 63.3 to 956
80 3" 1.8 to 27.1 18.1 to 271 1.8 to 27.1 95.9 to 1448
100 4" 2.8 to 42.4 28.3 to 424 2.8 to 42.4 150 to 2262
125 5" 4.4 to 66.3 44.2 to 663 4.4 to 66.3 234 to 3534
150 6" 6.4 to 95.4 63.6 to 954 6.4 to 95.4 337 to 5089
200 8" 11 to 170 113 to 1696 11 to 170 599 to 9048
250 10" 18 to 265 177 to 2651 18 to 265 937 to 14137
300 12" 25 to 382 254 to 3817 25 to 382 1349 to 20357
350 14" 35 to 520 346 to 5195 35 to 520 1836 to 27708
400 16" 45 to 679 452 to 6786 45 to 679 2398 to 36190
450 18" 57 to 859 573 to 8588 57 to 859 3034 to 45803
500 20" 71 to 1060 707 to 10603 71 to 1060 3746 to 56547
0.1m/s to 1.5m/s 5.3m/s to 80m/s 0.1m/s to 1.5m/s 5.3m/s to 80m/s
15 1/2" 0.1 to 2.1 7.3 to 110 0.3 to 4.0 14.1 to 212
20 3/4" 0.2 to 3.7 13 to 196 0.5 to 7.1 25.0 to 377
25 1" 0.4 to 5.8 20 to 307 0.7 to 11.1 39.1 to 590
32 1-1/4" 0.6 to 9.4 33 to 503 1.2 to 18.1 64.0 to 966
40 1-1/2" 1.0 to 14.7 52 to 785 1.9 to 28.3 100 to 1509
50 2" 1.5 to 23.0 81 to 1227 2.9 to 44.2 156 to 2358
65 2-1/2" 2.6 to 38.9 137 to 2074 5.0 to 74.7 264 to 3985
80 3" 3.9 to 58.9 208 to 3141 7.5 to 113 400 to 6037
100 4" 6.1 to 92.0 325 to 4908 11.8 to 177 625 to 9432
125 5" 9.6 to 144 508 to 7669 18.4 to 276 976 to 14738
150 6" 13.8 to 207 732 to 11044 26.5 to 398 1406 to 21222
200 8" 24.5 to 368 1301 to 19633 47.2 to 707 2500 to 37728
250 10" 38.3 to 575 2032 to 30677 73.7 to 1105 3905 to 58951
300 12" 55.2 to 828 2927 to 44175 106 to 1592 5624 to 84889
350 14" 75.2 to 1127 3983 to 60127 144 to 2166 7655 to 115543
400 16" 98.2 to 1472 5203 to 78533 189 to 2830 9998 to 150914
450 18" 124 to 1864 6585 to 99394 239 to 3581 12654 to 191000
500 20" 153 to 2301 8129 to 122708 295 to 4421 15622 to 235803
ALIA GROUP INC. ATF80V1.1.8en
mm Inch
Page 2
Normal Size Flow Range
mm Min. Range Max. RangeInch
Normal Size
Unit : AM3/Hr
Unit : Kg/Hr
Water Air
Min. Range Max. Range
Saturated Steam
3 BarG 7 BarG
Min. Range Max. Range Min. Range Max. Range
3. ALIATARGET Target Flowmeter Model ATF80 Series
Normal Size
mm Inch L1 L2 H1 H2
15 1/2" 150 66 355 280
20 3/4" 150 66 360 285
25 1" 150 66 365 290
32 1-1/4" 150 66 372 297
40 1-1/2" 150 66 380 305
50 2" 150 66 390 315
65 2.6" 200 66 405 320
80 3" 200 66 420 345
100 4" 200 66 440 365
125 5" 200 66 465 390
150 6" 200 66 490 415
200 8" 200 66 540 465
250 10" 200 66 590 515
300 12" 200 66 640 565
Flange Type
High Temp. Type Hot Tap
ALIA GROUP INC. ATF80V1.1.8en Page 3
DIMENSIONS
Insertion Type
Wafer Type
Unit:mm
LD210
®
M3 h/
M3
L2
H2+100
®
M3 h/
M3
L1
H1
®
M3 h/
M3
L2
H2
®
M3
M3 h/
M3
LD
4. ALIATARGET Target Flowmeter Model ATF80 Series
Model Selection Guide
ATF80- X- XXXX X - X X - X X X XX - XX Description
W- Wafer Type ( DN15~DN300 )
F- Flange Type( DN15~DN300 )
I- Insertion Type( DN100~DN6000)
0015 ~ 6000 15 ~ 6000mm (0.5" ~ 240")
H Horizontal
V Vertical
- 4 SUS 304 (Stainless Steel 304)
- 6 SUS 316 (Stainless Steel 316)
1 PN10
2 PN16
3 PN25
4 PN40
A ANSI 150 #
B ANSI 300 #
C ANSI 600 #
J JIS 10K
K JIS 20K
L JIS 40K
Z Others
- L -20 to +150 °C (Wafer / Flange / Insertion)
- M -40 to +300 °C (Wafer / Flange / Insertion)
- H -60 to 450 °C (Wafer / Flange / Insertion)
- R -20 to +80 °C (Hot Tap)
1- 3 One Range / Two Range / Three Range, (standard is 1)
N Intrinsically Safe, Eex ia IIC T4
X Explosion Proof, Ex d IIC T6
NN Compact
03- 10 Remote type with 3 - 10 Meter cable
- NN None
- HT Hart Signal
- HO Hot Tap (Retractable Probe Mounting)
- BV Ball Valve (for Insertion / Hot Tap Type)
- ZZ Others
For Insertion Type and Hot Tap type, you still need to provide following data
1. Pipe Inside Diameter(ID) 6. Fluid Name
2. Pipe Outside Diameter(OD) 7. Op. Temperature
3. Pipe Material 8. Op. Pressure
4. Flange Size 9. Flow Range
5. Extension Length (L)
ALIA GROUP INC. ATF80V1.1.8en
Installation & Cable length
Protection
ATF80 Series
Eaxmple:ATF80-F0150H-6A-H1NNN-HT
Size
Type
Installation
Connection
Max. Temperature
Multi Flow Range Calibrate
Page 4
Material
Option
ID OD
L
Flange