ATEX Hazardous Area Electrical Enclosures, Zone 1 - GRP Enclosure - Petrel G40

•

0 likes•1,242 views

Petrel G40 range of GRP hazardous area electrical enclosures and terminal boxes are suitable for use in Zone 1 gas and dust environments and can be configured to client specification. Petrel Zone 1 GRP Electrical Enclosures for Hazardous Areas * Graphite loaded material minimises static build up within enclosure * Various standard hazardous area GRP enclosure sizes * GRP enclosures are simple to populate, terminals 2.5-120sqmm * Hazardous area T class ratings, T6 -20°C to +40°C, T5 -20°C to +55°C * IP66 GRP electrical enclosure suitable for Zone 1 hazardous areas Hazardous Area GRP Electrical Enclosures : EEx e dm ia II 2 GD IIC T6 Thorne & Derrick UK are official distributors for the Petrel Hazardous Area & Explosion Proof Electrical Equipment ranges for Zones 1 and Zone 2 installation with ATEX certification - this includes hazardous area lighting (well glass, fluorescent luminaire, bulkhead, floodlight) motor starters, isolators, push button starter units, control stations and electrical enclosures. Cast (aluminium alloy or iron) explosion proof enclosures suitable for use in Zone 1 hazardous area applications. EX Lighting Products from Petrel Hazardous Area Electrical Equipment : Ex de Well Glass, Ex d Emergency Flourescent Luminaire, Ex de Bulkhead, Ex de Zone 1 Floodlight, Zone 2 Floodlight, Ex ed Standard & Emergency Flourescent Luminaire, Zone 2 Standard & Emergency Flourescent Luminaire, Ex d Flourescent Luminaire, Zone 2 Bulkhead Luminaire, Ex ed Recessed Zone 1 Flourescent Luminaire.

G40 Series GRP
Terminal Enclosures

ATEX
CERTIFIED

CAT 11
ZONE 1

Certification and Approval
Certification Code
Certification number
Certification standard
Protection

EEx e dm ia II 2 GD IIC T6
PTB 00 ATEX 1002
EN60079-0, 1, 7, 11, 18, EN50281-1-1-1999+A1
IP66

Features
Heavy duty GRP moulding
Silicone weather seal
Graphite loaded material to minimise static build up.

G48 and G49 Oktabox

Typical terminal
arrangement

Oktabox cable entry and
terminal arrangement

Oktabox external
mounting foot
WWW.CABLEJOINTS.CO.UK

Page 50

THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK

G40 Series GRP
Terminal Enclosures

ATEX
CERTIFIED

CAT 11
ZONE 1

Technical Data
Voltage/Current ratings

Dependant upon Ex components fitted and conductors
used

Operating Temperature

T6 -20ºC to +40ºC, T5 -20ºC to +55ºC

Terminals

2.5 up to 120 – subject to enclosure limits

Flammability

Self Extinguishing, UL 94/V
Use handle and cable gland for plug
4 fixing holes on plug to handle units

Material

Glass reinforced duroplastic polyester, graphite added
Halogen Free

Colour/Finish

Black as moulded

Mounting

G41 – G47 Internal fixing holes
G48 & G49 External fixing holes

Features

Silicone weather seal
Heavy duty GRP mouldings
Graphite loaded material to minimise static build up

Page 51

WWW.CABLEJOINTS.CO.UK

THORNE & DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK

This document provides information on electrical equipment for hazardous environments made by Walsall Ltd. It includes terminal enclosures, local control panels, distribution boards, lighting, and other equipment certified for use in explosive atmospheres. The company was founded in 1892 and originally manufactured bangles and metalwork, later expanding into electrical equipment. It offers a wide range of explosion proof products made from materials like stainless steel, aluminum, and GRP.

Control Stations - Hazardous Area - Technor EFQL

Thorne & Derrick International

This document provides information on EFQL Miniature Automatic Circuit Breakers. It summarizes that the breakers are made of copper-free aluminum and painted according to RAL 6003. They can be used indoors or outdoors in hazardous locations. The document also lists control units that consist of explosion-proof enclosures completed with automatic circuit breakers, on-load switches, and selector switches up to 63A. It provides specifications on material, IP ratings, temperature range, certifications, standards, explosion-proof codes, surface treatment, entries, poles, voltage, and accessories.

Clifford & Snell - Yodac V4 Beacon, Hazardous Area ATEX Zone 1 & 2 Beacons (...

Thorne & Derrick International

This document summarizes an intrinsically safe LED status beacon that is: 1) BASEEFA (ATEX) approved for use in hazardous zones, with up to 4 modules in combinations of lens colors like red, amber, green, opal, blue, or clear. 2) Rated for continuous use with high light intensity and a long life LED design. 3) Simple to install with a reliable, flame retardant ABS plastic enclosure that is also anti-static.

Clifford & Snell - Yodalex YO9 - Hazardous Area (ATEX) Sounder

Thorne & Derrick International

The document provides specifications for the Yodalex explosion proof sounder including: - It has a sound output of 115dB at 1 meter and is IP66 and NEMA 4X rated for outdoor or indoor use. - The sounder is approved for use in gas and dust hazardous areas and is evaluated for marine use. - It has adjustable settings for tone, voltage, and bracket mounting and provides monitoring and alarm functions.

New Liquid Leak Sensor: RS-3000

David Hill

The document describes the RS-3000 and RS-3500 series liquid leak sensors from TOYOKO KAGAKU CO.,LTD. and TYK,INC. The sensors can quickly detect liquid leaks which could cause serious problems in production equipment and facilities. They work using reflective light technology to sense changes when liquid is present. The sensors are reliable, easy to maintain and install, and can detect a wide range of liquid types.

Hazardous Area Control Station - GRP - Double Pole Off-On - Walsall LCP101-102

Thorne & Derrick International

This document provides contact and product information for multiple offices of Walsall Ltd., an international company that produces electrical enclosures and switches. It also includes specifications for one of their products, the LCP100 Ex de 16 Amp General Purpose Switch, including electrical ratings, materials, approvals, temperature ranges, ingress protection, area classifications, and ordering details. Contact information is listed for offices in the UK, UAE, USA, Singapore, and Brazil.

Stainless Steel Control Station - Double Pole off-on - Walsall LCS101-102

Thorne & Derrick International

This document provides contact and product information for multiple locations of Walsall Ltd., an international company that produces explosion proof electrical enclosures and switches. It includes addresses, phone numbers, and emails for offices in the UK, UAE, USA, Singapore, and Brazil. It also provides specifications for one of their products, the LCS100 explosion proof local control station, including dimensions, electrical ratings, materials, and ordering codes.

JAREL EXPORT

Paul Richardson

This document provides information on electrical products and services from Jarel Export for hazardous areas. It describes Jarel Export's specialization in hazardous area electrical products including lighting, control systems, power distribution, motor starters, and other equipment. Technical specifications and certifications are provided for several example products like bolted sockets, cable glands, luminaires, and motors.

Clifford & Snell is a UK-based company established in 1929 that specializes in audible and visual signaling equipment. The document provides information on Clifford & Snell's product range, which includes explosion proof sounders, strobes, and call point stations approved for hazardous and industrial applications. It also lists specifications for the company's Yodalex line of products and provides a product index with descriptions, types, and approvals for its sounders, strobes, and accessories.

Yr8600 uhf rfid marathon reader

inveton1

The document describes the specifications and features of the YR8600 UHF RFID marathon reader. It can read tags from 3-35 meters away, uses frequencies between 860-960MHz, and can inventory over 500 tags per second. It has an 800 tag buffer, uses an INDY Impinj R2000 chip, has an RS232 TCP/IP interface, and supports EPC Gen2 protocols. It has 4 ports with 12dbi/9dbi antennas and is powered by the R2000 chip for outstanding performance.

Flexicon Flexible Conduit Solutions - Metallic, Non-Metallic & FPA(X) Conduit...

Thorne & Derrick International

The document is an 11th edition product and solutions guide from Flexicon that: - Highlights new expansions to Flexicon's product range and markets served since the previous edition. - Notes Flexicon's British manufacturing heritage and investment in facilities, R&D, and people to achieve market-leading position in cable protection systems. - Discusses ongoing development of new innovative products to satisfy customer expectations in demanding markets like rail, transport, renewables, and more.

Motor Starters - DOL Direct on Line ATEX 5.5KW - Walsall DOL5.5

Thorne & Derrick International

This document provides information on electrical equipment for hazardous environments made by Walsall Ltd. It includes terminal enclosures, junction boxes, local control panels, and other equipment. The company was founded in 1892 and began making electrical equipment for hazardous areas in the 1920s. It now offers a wide range of explosion proof certified equipment for use in zones 1, 2, 21, and 22.

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...

Thorne & Derrick International

Clifford & Snell - Yodalex V6 - Hazardous Area ATEX Sounders (Horns) & Beacon...

Thorne & Derrick International

This document provides specifications for Clifford & Snell explosion proof sounders and beacons. The devices have omnidirectional high output sound, independently selectable 2-stage alarms, and share an explosion proof housing. They are approved by various standards including UL, CSA, ATEX, and IECEx. The sounders and beacons come in various voltage options and have IP66/NEMA 4X protection. Dimensions and current draw requirements are provided for the different models.

Clifford & Snell - YL4 Sounder - Hazardous Area (ATEX) Zone 1 & Zone 2

Thorne & Derrick International

This document provides specifications for intrinsically safe audible and visual alarms produced by Clifford & Snell. It includes details on: - Models of sounders and beacons that meet ATEX certification and UKOOA standards for use in hazardous zones - Technical specifications on operating voltages, temperatures, weights, sound outputs, and IP ratings - Dimensional drawings and mounting information for the different models - Recommended European approved barriers for use with the units - References for additional operating and installation instructions

06 pinze di-terra-eng

Hai Pham

The document provides information on explosion proof electrical equipment from Feam including earthing clamps, electronic grounding systems, and acoustic signallers. The earthing clamps (IT25 series) are used to connect tankers to ground during loading and unloading operations. The electronic grounding systems (SM2021 series) are used to verify grounding connections and allow loading/unloading when resistance is less than 20 ohms. The acoustic signallers (ETH2 and S2 series) provide audible alarms in hazardous areas.

Clifford & Snell - Manual Call Point, Hazardous Area (ATEX) - Yodalex MCP

Thorne & Derrick International

This document provides specifications for manual call point stations made by Clifford & Snell, including: - Technical specifications for light weight GRP enclosures with glass or push button activation, monitoring capability, and weather resistant paint. - Dimensions of 132.5mm x 74mm x 98mm and approvals to ATEX, IECEx, and BS EN 54-11 standards for use in hazardous zones. - Options include LED indicators, labels, cable entries, finishes, switches, and end of line or in line resistors.

Zirconia o2 sensors

en.ofweek.com Industrial B2B Marketplace

Marechal SPeX ATEX Plug & Socket Power Connector - Zones 1, 2 21, 22

Thorne & Derrick International

Marechal SPeX Single Pole Power Connector Zone 1 & Zone 2 Zone 21, Zone 22 680 Amp IP65/IP66 Water & Dust-tight Marechal Hazardous Area Plugs & Sockets 1000V a.c. / 1500V d.c. single pole, 6800A ‘e' increased safety Marechal SPeX plug and socket power connector enables the user to connect and disconnect heavy duty equipment simply and safely in hazardous area zones 1, 2, 21 and 22. Designed for use in hazardous areas the Marechal SPeX plug and socket assembly is ATEX 94/9/CE approved for zones 1 & 2 (gas) and zones 21 & 22 (dust). Marechal SPeX offers automatic IP66/IP67 ingress protection rating as soon as the plug is inserted into the socket. Electromechanical interlocking is provided via a microswitch (which opens and closes all phases simultaneously) to protect the user and to prevent electrical destabilisation of equipment. The Marechal casing is manufactured in glassfibre-reinforced polyester which affords excellent mechanical protection (IK08) and resistance to UV and chemical agents. Typical applications include mobile gensets, ship-to-shore supplies, mines, offshore platforms etc. The incorrect mating of phases is mechanically impossible. Furthermore colour-coding enables a visual check. Marechal SPeX Single Pole Power Connector Marechal SPeX - EX ATEX Hazardous Area Plug, Socket Power Connector Enhanced protection mode « e » Compliant with ATEX 94/9/CE Directive Zones 1 and 2 (gas) and zones 21 and 22 (dust) Up to 680 A Up to 1000 V a.c. Interlock switch system via pilot contacts, synchronized connection and disconnection for all phasesMechanical keying system with 5 positions to discriminate between phases Visual identification of phases with standard colour codes Automatically IP65 dust and watertight IK08 shock resistant GRP casings Resistant to temperature changes: -40 °C to +60 °C

Flexicon Flexible Conduit Solutions and Fittings for Hazardous Area - Low Fir...

Thorne & Derrick International

Flexicon is a manufacturer of flexible conduit and cable management solutions. They offer a wide range of liquid tight flexible conduit options that provide high levels of mechanical protection for indoor and outdoor cable installations. The conduit options include standard, low fire hazard, extra low fire hazard, and anti-static varieties to suit various applications and hazardous environments. Flexicon conduits and fittings are independently tested and certified to global standards to provide assurance of quality and compliance.

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...

Thorne & Derrick International

The document discusses explosion proof cable glands. It describes the Barr-Pb EEx d IIC brass barrier gland, which provides an IP66 seal for lead sheathed cables used in hazardous areas. It can be used in zones 1 and 2, and provides mechanical cable retention, electrical continuity to the armor wire and inner lead sheath. Technical data includes ATEX certification, a service temperature range of -60°C to +90°C, and zones in which it can be used. Tables provide gland details, references, thread sizes, and dimensions.

XRF_Family Brochure_2015

Attie Esterhuyse

The document discusses Thermo Scientific Niton portable XRF analyzers. It summarizes the key features and benefits of the analyzers, including their ability to provide lab-quality elemental analysis of metals in the field through their rugged design, easy-to-use interface, fast measurement times, and wide elemental detection range. The document also outlines their applications in industries such as metal recycling, manufacturing quality control, and oil and gas production to verify material composition and ensure process integrity.

Abtech SSD Ex d Stainless Steel Enclosure Range

Thorne & Derrick International

This document provides specifications for Abtech Limited's flameproof enclosure range for hazardous areas. It describes the materials, components, voltages, certifications, sizing options and dimensions for their SSD stainless steel enclosure models. Thirteen enclosure models are detailed that range in size from 190x160x80mm to 1080x630x420mm, with internal dimensions, weights, dissipated power ratings and optional configurations also specified.

Stahl EC-750 Camera - Dome Camera – ATEX Zone 1 Zone 2 Hazardous Area Dome Ca...

Thorne & Derrick International

Atex cert definition

Stanley Tay

This document provides definitions and classifications for hazardous area equipment certification. It includes: 1) Definitions for gas and dust zone classifications, IP and IK protection codes, ATEX equipment categories, types of explosion protection, conformity assessment modules, and temperature classes. 2) Charts listing gas and dust groups, typical zone suitability, radio frequency power thresholds, and cable gland selection guidance. 3) Abbreviated descriptions of common NEMA, UL, and CSA enclosure types and their approximate IEC/IP classifications.

Control Stations - Hazardous Area - Technor XAWG-XAWF-XAWFS

Thorne & Derrick International

The document describes control boxes/stations that provide explosion protection for use in hazardous environments. It includes specifications for several standard sizes of enclosures made of stainless steel or GRP. The boxes have IP66 protection, an operating temperature range of -20°C to +60°C, and drainage to prevent water penetration. They are ATEX approved and suitable for offshore, onshore, petrochemical and marine applications where explosive atmospheres may exist.

Hazardous Area Zone 1 & Zone 2 (ATEX) Gas Detection Instruments & Tools

Thorne & Derrick International

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TW) for SWA Steel ...

Thorne & Derrick International

The document provides information on the BARR-W EEx d IIC Brass Barrier Gland, an explosion proof cable gland for use in hazardous areas. It is suitable for steel wire armored cables and achieves an IP66 seal. It provides mechanical cable retention, electrical continuity through the armor wire, and is weatherproof, waterproof, and suitable for most climatic conditions. It is certified for use in Zone 1 and Zone 2 hazardous areas with a variety of electrical equipment types under the ATEX directive.

Petrel G40 Series GRP Terminal Enclosures - Hazardous Area ATEX Enclosures

Thorne & Derrick International

The document provides information on G40 Series GRP Terminal Enclosures that are ATEX certified for use in Category 11 Zone 1 hazardous areas. The enclosures have an EEx e dm ia II 2 GD IIC T6 certification and IP66 protection rating. They are made of glass reinforced duroplastic polyester with added graphite to minimize static build up. Technical data includes operating temperatures from -20°C to +40°C or +55°C depending on certification, terminals from 2.5 to 120 depending on enclosure size, and self-extinguishing flammability rating.

Star Delta Starters & Isolators 22KW ATEX Certified Zone 1 Hazardous Area

Thorne & Derrick International

Petrel Star Delta Motor Starter Features - G20 Heavy duty cast motor starter enclosures Wide size range for efficient use of space Close coupling option for isolation unit Cable entries M20 to M75 The Petrel range of EEx d Star Delta Motor Starters are intended for hazardous areas Zone 1 installation - Petrel G20 cast alloy or iron explosion proof enclosures are ATEX certified, standard push button starter units through to custom designed control panels can be produced to specification. Petrel Star Delta hazardous are Zone 1 motor starters with ATEX certification are designed for manual starting of motors within the specified kW power output range and are available with or without an isolator.

What's hot

Clifford & Snell Hazardous Area Explosion Proof Sounders & Beacons

Thorne & Derrick International

Yr8600 uhf rfid marathon reader

inveton1

Flexicon Flexible Conduit Solutions - Metallic, Non-Metallic & FPA(X) Conduit...

Thorne & Derrick International

Motor Starters - DOL Direct on Line ATEX 5.5KW - Walsall DOL5.5

Thorne & Derrick International

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...

Thorne & Derrick International

Clifford & Snell - Yodalex V6 - Hazardous Area ATEX Sounders (Horns) & Beacon...

Thorne & Derrick International

Clifford & Snell - YL4 Sounder - Hazardous Area (ATEX) Zone 1 & Zone 2

Thorne & Derrick International

06 pinze di-terra-eng

Hai Pham

Clifford & Snell - Manual Call Point, Hazardous Area (ATEX) - Yodalex MCP

Thorne & Derrick International

Zirconia o2 sensors

en.ofweek.com Industrial B2B Marketplace

Marechal SPeX ATEX Plug & Socket Power Connector - Zones 1, 2 21, 22

Thorne & Derrick International

Flexicon Flexible Conduit Solutions and Fittings for Hazardous Area - Low Fir...

Thorne & Derrick International

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...

Thorne & Derrick International

XRF_Family Brochure_2015

Attie Esterhuyse

Abtech SSD Ex d Stainless Steel Enclosure Range

Thorne & Derrick International

Stahl EC-750 Camera - Dome Camera – ATEX Zone 1 Zone 2 Hazardous Area Dome Ca...

Thorne & Derrick International

Atex cert definition

Stanley Tay

Control Stations - Hazardous Area - Technor XAWG-XAWF-XAWFS

Thorne & Derrick International

Hazardous Area Zone 1 & Zone 2 (ATEX) Gas Detection Instruments & Tools

Thorne & Derrick International

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TW) for SWA Steel ...

Thorne & Derrick International

What's hot (20)

Clifford & Snell Hazardous Area Explosion Proof Sounders & Beacons

Yr8600 uhf rfid marathon reader

Flexicon Flexible Conduit Solutions - Metallic, Non-Metallic & FPA(X) Conduit...

Motor Starters - DOL Direct on Line ATEX 5.5KW - Walsall DOL5.5

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TX) for SWB Steel ...

Clifford & Snell - Yodalex V6 - Hazardous Area ATEX Sounders (Horns) & Beacon...

Clifford & Snell - YL4 Sounder - Hazardous Area (ATEX) Zone 1 & Zone 2

06 pinze di-terra-eng

Clifford & Snell - Manual Call Point, Hazardous Area (ATEX) - Yodalex MCP

Zirconia o2 sensors

Marechal SPeX ATEX Plug & Socket Power Connector - Zones 1, 2 21, 22

Flexicon Flexible Conduit Solutions and Fittings for Hazardous Area - Low Fir...

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TP) for Lead Sheat...

XRF_Family Brochure_2015

Abtech SSD Ex d Stainless Steel Enclosure Range

Stahl EC-750 Camera - Dome Camera – ATEX Zone 1 Zone 2 Hazardous Area Dome Ca...

Atex cert definition

Control Stations - Hazardous Area - Technor XAWG-XAWF-XAWFS

Hazardous Area Zone 1 & Zone 2 (ATEX) Gas Detection Instruments & Tools

Explosion Proof Cable Glands - Prysmian Barrier Glands (424TW) for SWA Steel ...

Similar to ATEX Hazardous Area Electrical Enclosures, Zone 1 - GRP Enclosure - Petrel G40

Petrel G40 Series GRP Terminal Enclosures - Hazardous Area ATEX Enclosures

Thorne & Derrick International

Star Delta Starters & Isolators 22KW ATEX Certified Zone 1 Hazardous Area

Thorne & Derrick International

Star Delta Starters & Isolators 37KW ATEX Certified Zone 1 Hazardous Area

Thorne & Derrick International

Star Delta Starters & Isolators 30KW ATEX Certified Zone 1 Hazardous Area

Thorne & Derrick International

Star Delta Starters & Isolators 15KW ATEX Certified Zone 1 Hazardous Area

Thorne & Derrick International

The document provides information on G20 Series motor starters and isolators that are ATEX certified for use in hazardous locations. The units have heavy duty cast enclosures, come in a wide size range, and allow for close coupling isolation units. They are rated for use between -20°C to +40°C with an IP65 protection rating and certified according to EN 50014 and EN 50018 standards. Standard units range from 0.25kw to 350kw motors and include options like isolators, indicators, and relays.

Star Delta Starters & Isolators 55KW ATEX Certified Zone 1 Hazardous Area

Thorne & Derrick International

Star Delta Starters & Isolators 55KW ATEX Certified Zone 1 Hazardous Area. Petrel Star Delta Motor Starter Features - G20 Heavy duty cast motor starter enclosures Wide size range for efficient use of space Close coupling option for isolation unit Cable entries M20 to M75 The Petrel range of EEx d Star Delta Motor Starters are intended for hazardous areas Zone 1 installation - Petrel G20 cast alloy or iron explosion proof enclosures are ATEX certified, standard push button starter units through to custom designed control panels can be produced to specification. Petrel Star Delta hazardous are Zone 1 motor starters with ATEX certification are designed for manual starting of motors within the specified kW power output range and are available with or without an isolator.

Zone 1 Hazardous Area ATEX Certified Direct on Line (DOL) Motor Starters

Thorne & Derrick International

The document provides information on G20 Series motor starters and isolators that are ATEX certified for use in hazardous locations. The units have heavy duty cast enclosures, come in a wide size range, and allow for close coupling isolation units. They are certified under EEx d II 2 GD IIB T4, T5 or T6 and have an operating temperature of -20oC to +40oC with an IP65 rating. Standard units range from 0.25kw to 350kw for direct on line, star delta, and reversing applications.

Star Delta Starters & Isolators 11KW ATEX Certified Zone 1 Hazardous Area Mot...

Thorne & Derrick International

Ditek FPK4 Data Sheet

JMAC Supply

The DTK-FPK4 is a fire alarm control panel surge protection kit that contains: - A DTK-120SRD surge protector that provides AC power protection for alarm panels with 54,000 amp surge capacity and EMI/RFI filtering. - A DTK-MRJ45C5E protector with RJ45 connections that protects the four pairs of an IP dialer circuit. - The kit is designed to provide both AC power and IP communication circuit protection for fire alarm systems in a single convenient package.

Seaward PrimeTest 350 Handheld PAT Tester - Electrical Safety Portable Appliance

Thorne & Derrick International

The PrimeTest 350 is an advanced portable electrical safety tester derived from the PrimeTest 300. It features Bluetooth and USB connectivity for wireless data transfer. Batteries can be charged via port while still in the unit. It is lightweight at under 1kg and small, measuring 26cm x 10cm. The tester complies with updated safety standards and can perform various essential electrical tests quickly and efficiently.

AMS - Arctic Pad - Technical Information

jphawkins

1. The Arctic Pad is a heated rubber mat system developed for arctic and harsh environments to improve on current anti-icing and de-icing methods while providing a durable non-slip surface. 2. It contains self-regulating heat trace embedded in the core that automatically adjusts heating based on temperature without controls. 3. The mat provides advantages over traditional heat tracing like easier installation, improved heat distribution, traction, durability, and lower costs.

Wolf Safety Lamp - Zone 1 Hazardous Area Tank Lighting Kit (ATEX Certified)

Thorne & Derrick International

Tank Lighting - Wolf Hazardous Area Portable Lighting. Wolf Safety’s Zone 1 Hazardous Area Tank Lighting Kit, CE marked for ATEX compliance, provides a quick and easy portable temporary lighting solution in Zone 1 hazardous areas. The Tank Lighting Kit comprises a Zone 1, 230V or 110V to 24V Ex transformer supplying extra low voltage for use in tanks and vessels and four LL-500 fluorescent leadlamps, with either twin or quad lamp configuration. Each Wolf lamp is supplied with 20m SY cable and fitted with hazardous area ATX 2P+E plugs and sockets for connection in the explosive area, ATEX certified.

FWDT Air Warmers Exheat Flameproof Fan Heaters - Hazardous Area Industrial Ai...

Thorne & Derrick UK

The document provides product information for the EXHEAT 'FWDT' range of flameproof air warmers designed for heating small work or storage areas in hazardous zones where flammable atmospheres are present. The air warmers come in various wattage models from 500 to 2000 watts and temperature ratings of T2, T3, and T4. They are ATEX and IECEx certified, weatherproof to IP66/67, and suitable for floor or wall mounting with adjustable temperature controls. Typical applications include aircraft hangars, fuel servicing areas, chemical plants, offshore installations, and more.

Marechal PXN12C Ex ATEX Hazardous Area 10A Multi-Contact Connectors

Thorne & Derrick International

Within its range of ATEX power connectors and decontactor sockets, Marechal Electric offers Ex rated multipin connectors for use both on – and off-shore for power, signals and low-level data transmission applications. In common with all Marechal connectors, these multipins use contacts that are of the technically advanced silver-nickel butt contact type which maximise both current carrying capacity whilst resisting oxidisation. The latest addition to this range is the versatile Marechal PNCX – a 440V max. 5 pin Zone2 compact connector. Current carrying range is from 4-20mA to 10A whilst its mechanical terminals accept conductors from 0,75mm2 to 2,5mm2. Supplied as a 5 pin connector it’s rated when connected to IP66/IP67 and IP68 (depth tested at 10 metres for 15 days). Good for use in Zones 2 (gas) and 22 (dust) the Marechal PNCX can be used for various applications including lighting. A locking ring prevents unwanted separation. For use in Zones 1 & 2 (gas) and 2 & 22 (dust) engineers can choose between high specification 12, 25 and 37 corrosion-free metal bodied, multipin, ‘e’ rated connectors. Protection rating: II2 G D Ex e ia OR ib II C. All three versions – Marechal PXN12C (220V), DXN25C (440V) and DXN37C (220V) are supplied with the requisite number of contacts, packed in bags of 13. Making off these multipins is now much easier in that the contacts can be crimped (or soldered if preferred) on the bench before being inserted into the plug and socket casing with the specially supplied tool

FCR Convector Heater Exheat Flameproof Fan Heaters - Hazardous Area Industria...

Thorne & Derrick UK

Walsall - Hazardous Area ATEX Control Stations Zone 1 & Zone 2

Thorne & Derrick International

This document provides an overview of various terminal boxes, enclosures, and control equipment produced by Walsall Limited for use in hazardous areas. It describes features and specifications of their flameproof, increased safety, and intrinsically safe product lines for terminal boxes, local control stations, control panels, junction boxes, and other electrical equipment. The document establishes Walsall as a global supplier of explosion proof electrical equipment with a wide range of certified product options for integration into system solutions in hazardous environments.

Eltherm ELK-AG-N Heat Trace Cable - Spec Sheet

Thorne & Derrick UK

This document provides information about a PTFE insulated heating cable manufactured by Thorne and Derrick. The cable is factory terminated and can be used for freeze protection and temperature maintenance in hazardous areas and explosive atmospheres. It has advantages like high chemical and mechanical resistance, a high working temperature up to 260°C, and flexibility for complex installations. Applications include heat tracing of tanks, vessels, pipes and other equipment.

Exheat Hazardous Area Flameproof Thermostat & Transmitters Zone 1 & 2 Atex -...

Thorne & Derrick UK

The document describes the FXT range of air sensing thermostats. The thermostats can be mounted vertically and have the option to be sold with or without cables. They have a compact design, operate in temperatures from -60°C to 80°C, and are ATEX and IECEx certified for safety. The thermostats come in three models that turn on and off at different temperature thresholds and all have a fuse trip temperature of 76°C ± 3°C.

FEAM Enclosures - Hazardous Area & Explosion Proof Enclosures (ATEX, IECEx, I...

Thorne & Derrick International

FEAM enclosures are suitable for Hazardous Area Enclosures Zone 1 & Zone 2. T&D are distributors for the FEAM range of Hazardous Area Enclosures for installation in potentially explosive atmospheres - FEAM enclosures are specified for hazardous areas Zone 1 and Zone 2 (Gases) with international certifications according to ATEX, Inmetro, GOST-R, GOST-K, IECEx and CE. ATEX, IECEx, Inmetro, GOST-R, GOST-K, NEC505 Certified Enclosures. Hazardous Area Enclosures : Zone 1 & Zone 2 (Gases) - Zone 21 & Zone 22 (Dusts). Hazardous Area Classification Group: II Category: 2G - 2D

Abtech BPG Fire Rated Enclosures - Fire Rated Resistant Enclosures

Thorne & Derrick International

Fire Rated, LSOH (Low Smoke Zero Halogen LSF) Junction Box Enclosures IEC 331 (750°C for 3 hours) & BS6387 (950°C for 3 hours - Flame Only) Fire Rated Electrical Enclosures - Mild, Stainless Steel, GRP When installing essential electrical systems such as emergency lighting or fire safety controls, great emphasis is placed upon the fire survivability of the critical components such as fire dampers, actuators and cables that are contained in the area. Often the specification of the junction boxes and enclosures is neglected with respect to fire resistance and survival. On the basis that any system is only as good as the weakest part, it is important that attention is paid to the junction boxes being utilised for essential systems. Abtech ensure the fire survival of junction boxes using both the SX (stainless steel enclosure) and BPG (GRP enclosure) ranges. Fire Rated Electrical Enclosures Tested to IEC 331 - SX Enclosure Range : IEC331 - 750 Degrees celsius for 3 hours - flame only - PASSED BS6387 C - 950 Degrees celsius for 3 hours - flame only - PASSED BS6387 Z - 950 Degrees celius for 3 hours - external impact - PASSED BS6387 W - 950 Degrees celsius for 3 hours - water spray - PASSED Abtech SX and BPG electrical enclosures and junction boxes when fitted with ceramic terminals are suitable for use in areas designated to require fire resistant cables according to IEC331, BS6387 C (fire alone), BS6387 Z (impact test) and BS6387 W (fire with water test).

Similar to ATEX Hazardous Area Electrical Enclosures, Zone 1 - GRP Enclosure - Petrel G40 (20)