ASTM A 519 Seamless mechanical tubing is manufactured from carbon and alloy steels for structural or other mechanical purposes involving machining or heat treating, where close tolerances, smooth finish, or definite physical properties are important factors. It is a cost effective alternative to DOM steel tubing.
ASTM A519 SAE 4130 Seamless Tubing, ASME SA 519 Tubing manufacturers in China. Wuxi Xingye special steel is manufactured to produce carbon steel pipe and alloy steel tube
Wuxi xingye special steel is a leading manufacturer in China. They produce many kinds of steel tubes such as: boiler tube, mechanical tube & alloy steel pipe & carbon steel pipes
Influence of metallics and eaf type on specific consumptions and productivity...Jorge Madias
The paper is based on analysis of data od around 200 EAFs of different design: conventional, DC, twin shell, with scrap preheating in conveyor or shaft, etc.. Included in the survey are furnaces charging mostly scrap, and others charging (partially) hot metal, pig iron, HBI, or cold / hot DRI. The assessment includes power, oxygen natural gas and carbon consumption; tap-to-tap time, power-on time and power-off time, as well as hourly production. With the collected data, the influence of metallics (and their thermal state at charging), and furnace design, on specific consumptions and productivity are discussed.
Analysis of international standards on concrete reinforcing steel barJorge Madias
The presentation is centered in a comparison of reinforcing steel bar standards of twenty countries / regions, selected on the base of rebar production, exports and application. The comparison includes mechanical properties (yield strength, tensile strength, elongation to rupture, uniform elongation, strain hardening ratio); chemical composition; special tests like fatigue and adherence, and other items.The evolution of the requirements along time is taken into account, too. The focus is on the seismic behavior of concrete reinforcing bar
The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for automotive interior use.
ASTM A 519 Seamless mechanical tubing is manufactured from carbon and alloy steels for structural or other mechanical purposes involving machining or heat treating, where close tolerances, smooth finish, or definite physical properties are important factors. It is a cost effective alternative to DOM steel tubing.
ASTM A519 SAE 4130 Seamless Tubing, ASME SA 519 Tubing manufacturers in China. Wuxi Xingye special steel is manufactured to produce carbon steel pipe and alloy steel tube
Wuxi xingye special steel is a leading manufacturer in China. They produce many kinds of steel tubes such as: boiler tube, mechanical tube & alloy steel pipe & carbon steel pipes
Influence of metallics and eaf type on specific consumptions and productivity...Jorge Madias
The paper is based on analysis of data od around 200 EAFs of different design: conventional, DC, twin shell, with scrap preheating in conveyor or shaft, etc.. Included in the survey are furnaces charging mostly scrap, and others charging (partially) hot metal, pig iron, HBI, or cold / hot DRI. The assessment includes power, oxygen natural gas and carbon consumption; tap-to-tap time, power-on time and power-off time, as well as hourly production. With the collected data, the influence of metallics (and their thermal state at charging), and furnace design, on specific consumptions and productivity are discussed.
Analysis of international standards on concrete reinforcing steel barJorge Madias
The presentation is centered in a comparison of reinforcing steel bar standards of twenty countries / regions, selected on the base of rebar production, exports and application. The comparison includes mechanical properties (yield strength, tensile strength, elongation to rupture, uniform elongation, strain hardening ratio); chemical composition; special tests like fatigue and adherence, and other items.The evolution of the requirements along time is taken into account, too. The focus is on the seismic behavior of concrete reinforcing bar
The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for automotive interior use.
Direct alloying of steel a review of studies at lab and industrial scaleJorge Madias
The direct alloying of the steel is attractive as it minimizes alloying cost, total energy consumption and CO2 emissions, compared with ferroalloys. This allying technique is in use for high alloyed (stainless), low alloyed and carbon steel. The elements reviewed include chromium, nickel, molybdenum, vanadium and manganese. Raw materials used to this purpose are lump ores, ore fines, special slags, self-reducing briquettes and others. For the development of this technique, tools like thermodynamic modelling, testing in induction furnaces of several scales and industrial tests have been instrumental. This paper summarizes the fundamental and industrial efforts carried out to develop and employ direct alloying in Japan, Russia, China and other steelmaking countries
A review of defects in beam blank casting and the measures proposed for their...Jorge Madias
Beam blank casting is a mature process born in 1968 [1]. Around 60 casters has been installed since. In this paper a thorough review of the literature on defects in beam blanks is carried out. The focus is on the formation mechanism and the solutions proposed to decrease their occurrence. Surface defects included are longitudinal cracks and transverse cracks. Internal defects are blowholes and solidification cracks. The review includes the techniques used to investigate the defects: metallographical characterizations, CFD, thermodynamical and thermomechanical modelling, etc. The measures taken have to do with changes in casting system (i.e. SEN design), mold design, secondary cooling modifications and regulation, strand support.
Zhejiang Dewei Stainless Steel Pipe Industry CO., Ltd is one of the largest manufacturer of welded pipe and tube (stainless steel, Duplex, Super Duplex, Nickel Alloys, Copper-NIckel Alloys) in east China. www.deweigroup.cn Contact: Simon Zhang Mobile/Whatsapp:+86 13586303108 Tel/Fax:+86 (0)573 89979557 / +86 (0)573 82219767 Email:youngadm@126.com
Melt Flow Index Tester, Melt Flow Index Tester Manufacturers and Suppliers In...Presto Group
Looking for Melt Flow Index Tester manufacturers, Melt Flow Index Tester suppliers, Melt Flow Index Tester producers, Melt Flow Index Tester exporters, Melt Flow Index Tester wholesalers, Melt Flow Index Tester production centers ? Browse PrestoGroup.com for all your testing instruments needs. For more information visit- http://www.prestogroup.com/plastic-testing-instruments/melt-flow-index-deluxe
Monocrystalline and polycrystalline silicon copper electrode elementsMichael Chen
HZC Solutions could produce Water cooling cables,Monocrystalline and polycrystalline silicon copper electrode elements, Polycrystalline silicon Hydrogenated furnace water cooling electrode,polycrystalline silicon reduction water cooling furnace electrode,Polysilicon ingot furnace copper electrode.
Induction bend factory - Longtaidi have professional team and equipment to make hot bends according to ASME B16.9, ISO 15590. Apart from induction bends, we also produce weld overlay pipe, clad pipe fittings, lined pipe, NACE pipe fittings, and big diameter fittings.
For more details, please contact below:
jason.liu@longtaidi.com
ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Direct alloying of steel a review of studies at lab and industrial scaleJorge Madias
The direct alloying of the steel is attractive as it minimizes alloying cost, total energy consumption and CO2 emissions, compared with ferroalloys. This allying technique is in use for high alloyed (stainless), low alloyed and carbon steel. The elements reviewed include chromium, nickel, molybdenum, vanadium and manganese. Raw materials used to this purpose are lump ores, ore fines, special slags, self-reducing briquettes and others. For the development of this technique, tools like thermodynamic modelling, testing in induction furnaces of several scales and industrial tests have been instrumental. This paper summarizes the fundamental and industrial efforts carried out to develop and employ direct alloying in Japan, Russia, China and other steelmaking countries
A review of defects in beam blank casting and the measures proposed for their...Jorge Madias
Beam blank casting is a mature process born in 1968 [1]. Around 60 casters has been installed since. In this paper a thorough review of the literature on defects in beam blanks is carried out. The focus is on the formation mechanism and the solutions proposed to decrease their occurrence. Surface defects included are longitudinal cracks and transverse cracks. Internal defects are blowholes and solidification cracks. The review includes the techniques used to investigate the defects: metallographical characterizations, CFD, thermodynamical and thermomechanical modelling, etc. The measures taken have to do with changes in casting system (i.e. SEN design), mold design, secondary cooling modifications and regulation, strand support.
Zhejiang Dewei Stainless Steel Pipe Industry CO., Ltd is one of the largest manufacturer of welded pipe and tube (stainless steel, Duplex, Super Duplex, Nickel Alloys, Copper-NIckel Alloys) in east China. www.deweigroup.cn Contact: Simon Zhang Mobile/Whatsapp:+86 13586303108 Tel/Fax:+86 (0)573 89979557 / +86 (0)573 82219767 Email:youngadm@126.com
Melt Flow Index Tester, Melt Flow Index Tester Manufacturers and Suppliers In...Presto Group
Looking for Melt Flow Index Tester manufacturers, Melt Flow Index Tester suppliers, Melt Flow Index Tester producers, Melt Flow Index Tester exporters, Melt Flow Index Tester wholesalers, Melt Flow Index Tester production centers ? Browse PrestoGroup.com for all your testing instruments needs. For more information visit- http://www.prestogroup.com/plastic-testing-instruments/melt-flow-index-deluxe
Monocrystalline and polycrystalline silicon copper electrode elementsMichael Chen
HZC Solutions could produce Water cooling cables,Monocrystalline and polycrystalline silicon copper electrode elements, Polycrystalline silicon Hydrogenated furnace water cooling electrode,polycrystalline silicon reduction water cooling furnace electrode,Polysilicon ingot furnace copper electrode.
Induction bend factory - Longtaidi have professional team and equipment to make hot bends according to ASME B16.9, ISO 15590. Apart from induction bends, we also produce weld overlay pipe, clad pipe fittings, lined pipe, NACE pipe fittings, and big diameter fittings.
For more details, please contact below:
jason.liu@longtaidi.com
ASTM A335 P9 is the part of ASTM A335, The pipe shall be suitable for bending, flanging, and similar forming operations, and for fusion welding. The steel material shall conform to chemical composition, tensile property, and hardness requirements.
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
The different mechanical test requirements for pipes, namely, transverse or longitudinal tension test, flattening test, and hardness or bend test are presented.Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
Since our inception in the year 2007, we, SLS Stainless Pvt.Ltd., are a prominent organization, which is engaged in manufacturing and exporting a wide range of superior grade Industrial Pipes, Tubes, Sheets, Flanges & Fasteners. The offered range of products incorporates Duplex Pipes, Duplex Steel Pipes, Stainless Steel Pipes, etc. To manufacture our offered range of products, we make use of premium quality stainless steel metal. Our offered range of pipes and tubes is highly acclaimed in the market for its anti-corrosive properties, dimensional accuracy and longer functional life.
With the largest chrome inventory in the world, Sunny Steel carries a wide range of ASTM A335 / ASME SA335 chrome moly alloy pipe in a variety of lengths, ODs, IDs and wall thicknesses to meet your project’s needs—including pipe in hard-to-find sizes.
Hi-Tech Transducers & Devices is a premier manufacturer of high quality Thermocouple for Cement - http://www.hitechtransducers.com/thermocouple-cement.html
The expandable STMMA co-polymer is very popular in Chinese lost foam casting foundries. Here I posted the detailed specification of STMMA for studying by my friends.
The advantages of co-polymer used for lost foam casting:
Reduces carbon defects in castings
Reduces carurization defects on the surface of steel castings
Reduces smoke carbon
Improves surface finish of castings
Reduces the total production costs
ASTM A335, ASTM A335 P5, ASTM A335 P5 alloy pipe, seamless steel pipes, steel pipes
Each length of pipe shall be subjected to the hydrostatic test. Also, each pipe shall be examined by a non-destructive examination method in accordance to the required practices.
Immersion Disposable Thermocouples are used to measure the temperature directly, precisely and instantly through immersion method, in the production & refining of iron, steel & other ferrous and non-ferrous in Electric Arc Furnaces, other melting furnaces, LD converters, Ladles, etc and for the chemical analysis of the metal during its manufacturing stage. It is a simple and cost effective instrument and provides the quickest way to get the most accurate readings. To measure the temperature, the thermocouple is connected to the coupling lance. Which contains the polarized contact block.
Shandong Precision Metal Products Co.,Ltd occupies an area of 20000 square meters, with construction areas of 13000 square meters, and the total fixed assets is 800 Million Yuan. At present, it mainly has 5000 tons, 2000 tons, 1000 tons, 315 tons, 250 tons, 200 tons, double acting hydraulic machines, and has 4.2m, 7.2m, cold spinning machine, as well as 7 furnaces for heat treatment of various types of matching natural gases. Besides, there are also 60 sets of various type of auxiliary equipment.
The company main products contains: spherical shell plates, elliptical heads, dish end , flat bottomed head, spherical head, expansion joints, corrugated furnace and other non-standard shape items etc.
AK fittings is one of the leading industrial products supplier from USA. Get finest industrial services like Tube Fittings, Ball Valves, Snubbed, Pipe Fittings, etc. Browse our website for more details.
E470 20MnV6 Steel Pipe for Hydraulic Cylinders
Process Method:
Hot Rolled, Cold Drawn, Cold Rolled, Honed, SRB.
Delivery Condition:
Hot Finished(+AR), Normolized(+N), Quenched and tempered(Q+T), etc.
Dimensions and Tolerances:
Outer diameter: 21 to 720 mm, wall thickness: 2 to 200 mm, length: Not more than 12 m.
Related Specifications:
Steel Standard Steel Name Steel Number
EN 10294-1 / EN 10297 20MnV6 / E470 1.0536
Shanghai Unite Steel, a mechanical steel tubing manufacturer and stockiest from China.
Outer diameter: 51-530 mm
Wall thickness: 5-120 mm
Length: not more than 12 m
Astm a179 seamless low carbon steel tube for heat exchanger
1. ASTM A179 Boiler Tube
ASTM A179 seamless low carbon steel tube for heat exchanger.
Manufacture method: cold rolled, cold
drawn
Standard and material: ASTM A179 or
equivalent standard & material like ASTM
A192,DIN17175 ST35.8,ST35.8-III.
Size range: 12.7mm*1.2mm –
114.3mm*15mm
Delivery condition: annealed
Chemical composition of SA179 boiler
tube:
Element C Si Mn P S
Content (%) 0.06%-0.18% 0.17%-0.37% 0.27%-0.63% 0.035% max 0.035% max
Mechanical properties of SA179 steel tube:
Tensile strength: 325 MPA min
Yield strength: 180 MPA min
Elongation: 35% min
Packaging & Shipping
Packing: bundle packing, black painting or varnish or oil coating, end plastic
caps.
Marking: as per customer's requirement.
Shipping: by containers
Our Services:
Third Party inspection acceptable. such as SGS, BV etc.
Supplying financial support with usance L/C 180 days after B/L date.
Mill test certificates will be issued according to EN10204/3.1B
Contact Us:
Shanghai Unite Steel
Phone: 86-15121067826
Skype: samsonhuang22