Assignment 3: Management Accounting Case: West Island Products
Due Week 8, Day 7 (100 points)
6 pages
The specific course learning outcomes associated with this assignment are:
•
Apply key techniques and concepts in measuring the cost of producing goods and
services.
•
Apply management accounting concepts to identify and process relevant financial
information for decision-making purposes.
•
Use technology and information resources to research issues in financial management.
•
Write clearly and concisely about financial management using proper writing mechanics.
Assignment:
West Island Products (WIP) is a divisionalized furniture manufacturer. The divisions are
autonomous segments with each division responsible for its own sales, cost of operations, and
equipment acquisition. Divisional performance is evaluated annually based on ROI. Each division
serves a different market in the furniture industry. Because the markets and products of the
divisions are so different, there have never been any transfers between divisions.
The Commercial Division of WIP, manufacturers furniture for the restaurant industry. The
Commercial Division plans to introduce a new line of counter chair units featuring a cushioned
seat. Roberta Katz, the Commercial Division manager, has discussed the manufacturing of the
cushioned seats with Nathan Danielson of the Office Division. They both believe a cushioned
seat currently made by the Office Division for use on its deluxe office stool could be modified for
use on the new counter chair. Consequently, Katz asked Danielson for a price for 100-unit lots of
the cushioned seats. The following conversation took place about the price to be charged for the
cushioned seats.
Danielson:
“Roberta, we can make the necessary modifications to the cushioned seat easily.
The raw materials used in the new counter chair seat are slightly different and
should cost about 10 percent more than those used in our deluxe office stool.
However, the labor time should be the same because the seat fabrication
process is the same. I would price the cushioned seat at our regular rate: full cost
plus a 30 percent mark-up. According to my calculations, that would be $2,053
per lot of 100 seats.”
Katz:
“That’s higher than I expected, Nathan. I was thinking that a good price would be
your variable manufacturing cost. After all, your fixed costs will be incurred
regardless of this job. In addition, I have received a quote from one of the
Commercial Division’s regular suppliers to provide us with the counter seats at
$1,900 per lot of 100 seats.”
Danielson:
“Roberta, I am at full capacity. By making the cushioned seats for you, I have to
cut my production of deluxe office stools. The labor time freed by not having to
fabricate the frame and assemble the deluxe stool can be shifted to the
production of the economy stool. I’d like to sell the cushioned seats to you at my
variable cost, but I have excess.
For more classes visit
www.snaptutorial.com
What are the differences between variable and absorption costing? Why is variable costing not allowed for GAAP reporting? Which method is more useful for internal decision making? Why? As a manager, which would you prefer? Why?
For more classes visit
www.snaptutorial.com
What are the differences between variable and absorption costing? Why is variable costing not allowed for GAAP reporting? Which method is more useful for internal decision making? Why? As a manager, which would you prefer? Why?
FOR MORE CLASSES VISIT
www.acc561genius.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios
New venture development excercise with three friends. Rounded for funding, we decided not to pursue the opportunity when we found that another player was far ahead in development and had multi lingual and multi country ambitions.
For more course tutorials visit
www.uopacc561.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios to evaluate and analyze
FOR MORE CLASSES VISIT
www.acc561genius.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios to evaluate and analyze a
Dimensional model for an OLAP Database with star schema to architect Enterprise Data Warehouse. ETL process to load five days’ worth of nationwide sales data in just one hour. Use of Project level variables, SSIS expressions and the parallel Control Flows to make ETL process efficient and dynamic.
FOR MORE CLASSES VISIT
www.acc561genius.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios to evaluate and analyze a company’s liquidity, solvency, and profitability. Two-Rivers Inc. (TRI) manufactures a variety
Selecting and Implementing an Effective Time and Expense Management SolutionIan Needs
A practical guide to the common benefits achieved through automating your timesheet and expense capture, how significant cost savings can be achieved and how your organization can potentially improve its bottom line.
BUS 630 Week 1 Assignment Dell, Inc..doc
BUS 630 week 1 DQ 1 Theory of Constraints.doc
BUS 630 week 1 DQ 2 Kranbrack Corporation.doc
BUS 630 week 2 Assignment Basic CVP Analysis (Fashion Shoe Company).doc
BUS 630 week 2 DQ 1 Downsizing and fixed cost.doc
BUS 630 week 2 DQ 2 Direct Labor Variable or Fixed Cost.doc
BUS 630 week 3 Assignment JetBlue Airways.doc
BUS 630 week 3 DQ 1 Fixed Labor.doc
BUS 630 week 3 DQ 2 Profitability.doc
BUS 630 week 4 Assignment Master budget exercise.doc
BUS 630 week 4 DQ 1 Behavioral aspects of budgeting.doc
BUS 630 week 4 DQ 2 Critiquing a Cost Report.doc
BUS 630 week 5 Assignment FedEx Corporation.doc
BUS 630 week 5 DQ 1 Variance Analysis in a Hospital.doc
BUS 630 week 5 DQ 2 Perverse Affects of Some Performance Measures.doc
BUS 630 week 6 Assignment Final Project (Cost management).doc
BUS 630 week 6 DQ 1 Make Or Buy.doc
BUS 630 week 6 DQ 2 Net Present Value Analysis.doc
1
june 30 ,2015
Group 4
Project Status Report
To: Dr. Bingbing Li
From: Sulaiman alarifi , khalid Alkatheeri , Ali Alsaggaf, Almalki,Abdulaziz Ahmed , Abdullah Bafarat
Date: June 30, 2015
Subject: Project II remodeling manufacturing workshop of the Department of MSEM at CSUN
Project Overview
The focus of the project is the plan of reorganizing and remodeling of the manufacturing workshop of the Department of MSEM at CSUN(JD-1128). Our main tasks are developing a new comprehensive remodeling plan and design a new efficient convenient floor layout where the full area of is accessible from the main entrance as well as the back door. The following bullet points are summarizing the workflow of planning and layout design.
Work Completed
Dilemmas at the workshop are space utilization efficiency, overcrowded equipment and infrequently used tools taking space. The proposed solution is relocating the machines in a way to maximize space efficiency, tools turnover where big machines can be replaced with smaller one and deliver same quality of work, and relocating and resizing storage area. In addition, a safe walk path is needed for customers to move from workstation to another or move product with the workshop.
The data we have collected are workshop back ground, workshop area and tools dimensions. Full data is appended.
gantt chart
Data collecetion :
Machine list and dimansions
Machine
Width (inch)
Length (inch)
1- Wilton- Sand paper machine
1 ft
1 ft
2- 508 vs Drilling machine (Model 9512484)
1ft
1.5ft
3- Acer E-Lathe 1440v
2.7ft
1 ft
4- DAKE V-24(Model v-24)
1ft
2ft
5- NEF 320 Gildemeister
4ft
2-5ft
6- VF3 HAAS
6ft
3ft
7- Computer Table area
8- The Morgan-Press
0.5ft
0.6
9- Hypred layer manufacturing 3D printer
1ft
1ft
10- Lincoln Electric
3.6ft
1.3ft
11- Millermatic 350P
0.5ft
1ft
12- Inductronix power pulse
1ft
0.7ft
13- HAAS Mill operators
4ft
3ft
14- CMM Machine- Bright-M mitutoyo
3ft
2ft
15- Thermoset 3D printer
3 ft
1.2 ft
16- Dimension SST 1200 3D Printer
1ft
1.3 ft
17- Maker Boot Replicator 3D Printer
1 ft
1 ft
18- Cube X DUO 3D Printer
1 ft
1ft
19- Ryobi thin line bench grinder
1ft
1.3ft
20- Syncowave 180 sd
0.5ft
1.5ft
21- E-mill
3ft
2.1ft
22- Quill position control
23- Bal dou
1ft
0.5ft
Work in Progress
Currently we are reviewing the feasibility of our proposed solution and coordinating personal interviews with Roger and workshop customers. In addition, we are reviewing class material to find a quantitative representation of proposed solution and prospect ideas.
Works to Be Completed in Next One Months
There are paramount tasks and milestone need to be done and finalized before the due date. The first one is creating the outline for the final report and auditing the outline against the grading guide line. Write the first draft of the report and review with team. Second task is expanding and detailing the current project plan and objectives. Third task is evaluating the new method versus the cur.
ASSIGNMENT 3 POWER, POLITICS, AND CULTURE Due Week 9 and .docxdanielfoster65629
ASSIGNMENT 3: POWER, POLITICS, AND CULTURE
Due Week 9 and worth 190 points
In Assignment 2, you created a professional development plan using EI building blocks and motivation. In
this last assignment, you will examine how politics and power influence an organization and its culture.
In business, power and politics greatly influence an organizational culture and may hinder organizational
productivity. In your role as consultant you observed power and politics influence on the corporate culture.
INSTRUCTIONS
Following SWS standards, write a 5 to 7 page report that addresses the following:
1. Influence of Politics and Power
○ Explain how politics and power-play may have influenced the organization’s culture.
2. Sources of Power
○ Explore the sources of power and describe how management could use this influence to
benefit the department and improve organizational performance.
3. Leadership Behavior and Culture
○ Make recommendations that support how the study of power and politics could influence
leadership behavior and improve the organization’s culture.
4. Leadership Influence
○ Discuss the importance and complexity of leadership behavior in solving the issue you
identified. How does it influence organizational structure and performance?
5. References and Citations
○ Go to https://research.strayer.edu to locate at least two resources.
○ In-text citations are required when paraphrasing or quoting another source.
6. Formatting and Writing Standards
○ Formatting and writing standards are part of your grade. Align your formatting to the
Strayer Writing Standards.
*Grading for this assignment will be based on the following criteria and evaluation standards:
https://research.strayer.edu/
https://research.strayer.edu/
POINTS: 190 ASSIGNMENT 3: POWER, POLITICS, AND CULTURE
Criteria Exemplary
100% - A
Proficient
85% - B
Fair
75% - C
Unacceptable
0% - F
1. Influence of
Politics and
Power
Weight: 20%
Completely explains
how politics and
power-play may have
influenced the
organization’s culture.
Accurately identifies
the core issues and
strongly connects them
to the impact on
culture. The
explanation is well-
supported by research.
Satisfactorily explains
how politics and power-
play may have
influenced the
organization’s culture.
Identifies some core
issues and connects
them to the impact on
the culture. The
explanation uses
research support.
Partially explains how
politics and power-play
may have influenced the
organization’s culture.
Identifies some issues but
does not fully explore them
or make a strong
connection to their impact.
Uses little research
support.
Does not explain
how politics and
power-play may
have influenced the
organization’s
culture.
2. Sources of
Power
Weight: 20%
Completely identifies
the sources of power
and describes how
management could
use th.
Assignment 3 Organization of a Health Care FacilityDue Week 6 and.docxdanielfoster65629
Assignment 3: Organization of a Health Care Facility
Due Week 6 and worth 200 points
Your reputation as a renowned administrator to successfully lead mergers and acquisitions of hospitals precedes you, and you have been hired to create and open a new specialty health care business. This is a clinic with physicians who specialize in the following areas: dermatology, gynecology, heart disease, respiratory disease, surgery, and gastroenterology. It is located in an exclusive neighborhood.
Write an eight to twelve (8-12) page paper in which you:
1.
Determine whether you would incorporate and state the advantages and disadvantages of doing so.
2.
Determine the feasibility of a profit or nonprofit organizational status for this facility.
3.
Create a contract structure, including four (4) necessary clauses, for inclusion for medical staff for this facility.
4.
Outline a plan to hire or appoint specialists for the clinic.
5.
Justify the decision to accept Medicare or Medicaid as potential pay sources for this exclusive clinic.
6.
Use at least five (5) quality academic resources in this assignment. Note: Wikipedia and other Websites do not quality as academic resources.
Your assignment must follow these formatting requirements:
·
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
·
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
.
More Related Content
Similar to Assignment 3 Management Accounting Case West Island Products.docx
FOR MORE CLASSES VISIT
www.acc561genius.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios
New venture development excercise with three friends. Rounded for funding, we decided not to pursue the opportunity when we found that another player was far ahead in development and had multi lingual and multi country ambitions.
For more course tutorials visit
www.uopacc561.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios to evaluate and analyze
FOR MORE CLASSES VISIT
www.acc561genius.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios to evaluate and analyze a
Dimensional model for an OLAP Database with star schema to architect Enterprise Data Warehouse. ETL process to load five days’ worth of nationwide sales data in just one hour. Use of Project level variables, SSIS expressions and the parallel Control Flows to make ETL process efficient and dynamic.
FOR MORE CLASSES VISIT
www.acc561genius.com
Purpose of Assignment This activity helps students recognize the significant role accounting plays in providing financial information to management for decision making through the evaluation of financial statements. This experiential assignment requires students to use ratios to evaluate and analyze a company’s liquidity, solvency, and profitability. Two-Rivers Inc. (TRI) manufactures a variety
Selecting and Implementing an Effective Time and Expense Management SolutionIan Needs
A practical guide to the common benefits achieved through automating your timesheet and expense capture, how significant cost savings can be achieved and how your organization can potentially improve its bottom line.
BUS 630 Week 1 Assignment Dell, Inc..doc
BUS 630 week 1 DQ 1 Theory of Constraints.doc
BUS 630 week 1 DQ 2 Kranbrack Corporation.doc
BUS 630 week 2 Assignment Basic CVP Analysis (Fashion Shoe Company).doc
BUS 630 week 2 DQ 1 Downsizing and fixed cost.doc
BUS 630 week 2 DQ 2 Direct Labor Variable or Fixed Cost.doc
BUS 630 week 3 Assignment JetBlue Airways.doc
BUS 630 week 3 DQ 1 Fixed Labor.doc
BUS 630 week 3 DQ 2 Profitability.doc
BUS 630 week 4 Assignment Master budget exercise.doc
BUS 630 week 4 DQ 1 Behavioral aspects of budgeting.doc
BUS 630 week 4 DQ 2 Critiquing a Cost Report.doc
BUS 630 week 5 Assignment FedEx Corporation.doc
BUS 630 week 5 DQ 1 Variance Analysis in a Hospital.doc
BUS 630 week 5 DQ 2 Perverse Affects of Some Performance Measures.doc
BUS 630 week 6 Assignment Final Project (Cost management).doc
BUS 630 week 6 DQ 1 Make Or Buy.doc
BUS 630 week 6 DQ 2 Net Present Value Analysis.doc
1
june 30 ,2015
Group 4
Project Status Report
To: Dr. Bingbing Li
From: Sulaiman alarifi , khalid Alkatheeri , Ali Alsaggaf, Almalki,Abdulaziz Ahmed , Abdullah Bafarat
Date: June 30, 2015
Subject: Project II remodeling manufacturing workshop of the Department of MSEM at CSUN
Project Overview
The focus of the project is the plan of reorganizing and remodeling of the manufacturing workshop of the Department of MSEM at CSUN(JD-1128). Our main tasks are developing a new comprehensive remodeling plan and design a new efficient convenient floor layout where the full area of is accessible from the main entrance as well as the back door. The following bullet points are summarizing the workflow of planning and layout design.
Work Completed
Dilemmas at the workshop are space utilization efficiency, overcrowded equipment and infrequently used tools taking space. The proposed solution is relocating the machines in a way to maximize space efficiency, tools turnover where big machines can be replaced with smaller one and deliver same quality of work, and relocating and resizing storage area. In addition, a safe walk path is needed for customers to move from workstation to another or move product with the workshop.
The data we have collected are workshop back ground, workshop area and tools dimensions. Full data is appended.
gantt chart
Data collecetion :
Machine list and dimansions
Machine
Width (inch)
Length (inch)
1- Wilton- Sand paper machine
1 ft
1 ft
2- 508 vs Drilling machine (Model 9512484)
1ft
1.5ft
3- Acer E-Lathe 1440v
2.7ft
1 ft
4- DAKE V-24(Model v-24)
1ft
2ft
5- NEF 320 Gildemeister
4ft
2-5ft
6- VF3 HAAS
6ft
3ft
7- Computer Table area
8- The Morgan-Press
0.5ft
0.6
9- Hypred layer manufacturing 3D printer
1ft
1ft
10- Lincoln Electric
3.6ft
1.3ft
11- Millermatic 350P
0.5ft
1ft
12- Inductronix power pulse
1ft
0.7ft
13- HAAS Mill operators
4ft
3ft
14- CMM Machine- Bright-M mitutoyo
3ft
2ft
15- Thermoset 3D printer
3 ft
1.2 ft
16- Dimension SST 1200 3D Printer
1ft
1.3 ft
17- Maker Boot Replicator 3D Printer
1 ft
1 ft
18- Cube X DUO 3D Printer
1 ft
1ft
19- Ryobi thin line bench grinder
1ft
1.3ft
20- Syncowave 180 sd
0.5ft
1.5ft
21- E-mill
3ft
2.1ft
22- Quill position control
23- Bal dou
1ft
0.5ft
Work in Progress
Currently we are reviewing the feasibility of our proposed solution and coordinating personal interviews with Roger and workshop customers. In addition, we are reviewing class material to find a quantitative representation of proposed solution and prospect ideas.
Works to Be Completed in Next One Months
There are paramount tasks and milestone need to be done and finalized before the due date. The first one is creating the outline for the final report and auditing the outline against the grading guide line. Write the first draft of the report and review with team. Second task is expanding and detailing the current project plan and objectives. Third task is evaluating the new method versus the cur.
ASSIGNMENT 3 POWER, POLITICS, AND CULTURE Due Week 9 and .docxdanielfoster65629
ASSIGNMENT 3: POWER, POLITICS, AND CULTURE
Due Week 9 and worth 190 points
In Assignment 2, you created a professional development plan using EI building blocks and motivation. In
this last assignment, you will examine how politics and power influence an organization and its culture.
In business, power and politics greatly influence an organizational culture and may hinder organizational
productivity. In your role as consultant you observed power and politics influence on the corporate culture.
INSTRUCTIONS
Following SWS standards, write a 5 to 7 page report that addresses the following:
1. Influence of Politics and Power
○ Explain how politics and power-play may have influenced the organization’s culture.
2. Sources of Power
○ Explore the sources of power and describe how management could use this influence to
benefit the department and improve organizational performance.
3. Leadership Behavior and Culture
○ Make recommendations that support how the study of power and politics could influence
leadership behavior and improve the organization’s culture.
4. Leadership Influence
○ Discuss the importance and complexity of leadership behavior in solving the issue you
identified. How does it influence organizational structure and performance?
5. References and Citations
○ Go to https://research.strayer.edu to locate at least two resources.
○ In-text citations are required when paraphrasing or quoting another source.
6. Formatting and Writing Standards
○ Formatting and writing standards are part of your grade. Align your formatting to the
Strayer Writing Standards.
*Grading for this assignment will be based on the following criteria and evaluation standards:
https://research.strayer.edu/
https://research.strayer.edu/
POINTS: 190 ASSIGNMENT 3: POWER, POLITICS, AND CULTURE
Criteria Exemplary
100% - A
Proficient
85% - B
Fair
75% - C
Unacceptable
0% - F
1. Influence of
Politics and
Power
Weight: 20%
Completely explains
how politics and
power-play may have
influenced the
organization’s culture.
Accurately identifies
the core issues and
strongly connects them
to the impact on
culture. The
explanation is well-
supported by research.
Satisfactorily explains
how politics and power-
play may have
influenced the
organization’s culture.
Identifies some core
issues and connects
them to the impact on
the culture. The
explanation uses
research support.
Partially explains how
politics and power-play
may have influenced the
organization’s culture.
Identifies some issues but
does not fully explore them
or make a strong
connection to their impact.
Uses little research
support.
Does not explain
how politics and
power-play may
have influenced the
organization’s
culture.
2. Sources of
Power
Weight: 20%
Completely identifies
the sources of power
and describes how
management could
use th.
Assignment 3 Organization of a Health Care FacilityDue Week 6 and.docxdanielfoster65629
Assignment 3: Organization of a Health Care Facility
Due Week 6 and worth 200 points
Your reputation as a renowned administrator to successfully lead mergers and acquisitions of hospitals precedes you, and you have been hired to create and open a new specialty health care business. This is a clinic with physicians who specialize in the following areas: dermatology, gynecology, heart disease, respiratory disease, surgery, and gastroenterology. It is located in an exclusive neighborhood.
Write an eight to twelve (8-12) page paper in which you:
1.
Determine whether you would incorporate and state the advantages and disadvantages of doing so.
2.
Determine the feasibility of a profit or nonprofit organizational status for this facility.
3.
Create a contract structure, including four (4) necessary clauses, for inclusion for medical staff for this facility.
4.
Outline a plan to hire or appoint specialists for the clinic.
5.
Justify the decision to accept Medicare or Medicaid as potential pay sources for this exclusive clinic.
6.
Use at least five (5) quality academic resources in this assignment. Note: Wikipedia and other Websites do not quality as academic resources.
Your assignment must follow these formatting requirements:
·
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
·
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
.
Assignment 3 Neuroanatomy ProjectImagine that you are working in .docxdanielfoster65629
Assignment 3: Neuroanatomy Project
Imagine that you are working in a neurology clinic. One of the neurologists tells you that as her practice is expanding, she is having difficulty meeting the education needs of her patients. Part of this problem is explaining the basic neuroanatomical structures to the patients in layperson’s language so that they understand their diagnoses and their underlying neurological impairment. The neurologist asks you to create a written guide for the patients, including both the CNS and PNS. She describes what the basic neuroanatomical structures are, where they are located, how they interact, and what function they serve.
She asks you to name the structures by using the correct technical language but to use layperson’s language as much as possible elsewhere.
Your "Neuroanatomy Guide" should cover the following:
Basic neuroanatomical structures (including the CNS and PNS, as well as the structural packaging that protects the brain from the environment)
Locations of these structures
Functions they serve (what functions damage to this area may affect)
How they interact
Be sure to explain the information in layperson’s language, and use graphics and pictures where helpful. Use APA format when citing material from scholarly sources such as your textbook and online notes. Include a cover page and a reference page listing the resources you used to create your guide.
Submit your response to the
M1: Assignment 3 Dropbox
by
Wednesday, November 27, 2013
. Your response should be at least two pages long.
Assignment 3 Grading Criteria
Maximum Points
Described basic neuroanatomical structures (including the CNS and PNS, as well as the structural packaging that protects the brain from the environment) and their locations.
40
Described functions they serve and how they interact.
40
Wrote in a clear, concise, and organized manner; demonstrated ethical scholarship in accurate representation and attribution of sources; displayed accurate spelling, grammar, and punctuation. Explained the information in layperson’s language, and used graphics and pictures where helpful.
20
Total:
100
.
Assignment 3 Network Security Planning - SAFE· Securing a lar.docxdanielfoster65629
Assignment 3: Network Security Planning - SAFE
· Securing a large internetwork remains a daunting challenge. Cloud computing and social networks add to this complexity. In two to three (2-3) pages, and using the CISCO SAFE reference architecture, review the modules that afford an organization the foremost protection in evolving technologies and media.
Write a two to three (2-3) page paper in which you:
1. Determine if the SAFE architecture has any limitations.
Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.
Your assignment must follow these formatting requirements:
. Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
. Include a cover page containing the title of the assignment, the student's name, the professor's name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
1/2
Managerial Economics Formulas1
Elasticity of Demand
,
%
%
%
%
%
%
x x x
p
x x x
x x x
I
D
xX Y
x y
Y y x
Q dQ P
E
P dP Q
Q dQ P
E
I dI I
dQQ P
E
P dP Q
Price, Marginal Revenue and Elasticity
1 1
1
1
1P
P
MR P P MR
E
E
Consumption Theory
X
XY
Y
X X X Y
Y Y X Y
X Y
MU
MRTS
MU
MU P MU MU
MU P P P
X P Y P I
Calculus Rules: Derivatives
If , 0
dy
y a then
dx
If
1
,
b bdY
y ax then abx
dx
If ,
dy dy dz
y u x z x then
dx dx dx
If . , then
dY dZ dU
y u x z x u z
dx dx dx
If
2
. .
,
du dz
z u
u x dy dx dxy then
z x dx z
At Maximum
2
2
0
Y
X
and at minimum
2
2
0
Y
X
Production Theory
( )
L L L
L K L L
L K K K
L K
TP d TP
AP MP P MP W
L dL
MP MP MP P
P P MP P
TC L P K P
1
Ibrahim Elsaify, Applications in Managerial Economics, 2011. All Rights Reserved.
2/2
Economies of Scale
( , )
( , )
Q f L K
Q f L K
Q Q IRS
Economies of Scope
, ) , 0) , )
) ) , )
, 0
, )
( ( (0
( ( (
(
x y x y
x y x y
x y
Economies of Scope
Also S Economies of Scope
TC Q Q TC Q TC Q
TC Q TC Q TC Q Q
TC Q Q
Equilibrium Conditions:
Market Equilibrium:
Q Q
d s
Firm Equilibrium: MR = MC where
( ) ( )
d TR d TC
MR and MC
dQ dQ
where TR TC TR P Q
Cost Functions
( ) ( )
AC AVC AFC
TC TVC TFC
TC TVC TFC
Q Q Q
d TC d TVC
MC
dQ dQ
Market Concentration
a. N-Firm Concentration Ratio (N-Firm CR)
1 2 3 4
4 1 2 3 4
: i
i
T T
S S S S S
C W W W W Wher.
Assignment 3 Mobile Computing and Social Networking Due Week 7 a.docxdanielfoster65629
Assignment 3: Mobile Computing and Social Networking
Due Week 7 and worth 75 points
Mobile computing has dramatically changed how information is accessed and shared. Wireless networking has been an enabler of mobile computing. One profession that mobile computing has had a big impact on is health care management. Patients are now able to monitor their vital signs such as blood pressure, glucose levels, etc. without having to periodically visit a doctor’s office or hospital. There are devices such as the Withings Blood Pressure Monitor that works with an iPhone, iPod Touch, or iPad to record, track, and graph a patient’s blood pressure. There are other devices that can measure blood glucose levels, oxygen levels, heart rate, etc. and use an iPhone to send the results to a clinical server. Doctors and caregivers are then able to access the data on the clinical server. According to the American College of Gastroenterology, social networking sites like Facebook, Twitter, and YouTube are used as powerful platforms to deliver and receive health care information. Patients and caregivers are increasingly going online to connect and share experiences with others with similar medical issues or concerns Patients are able to take advantage of social networks to do more than just share pictures and tweets. Write a four to five (4-5) page paper in which you:
Compare and contrast monitoring of patient vital signs using mobile computing technology to in-patient visits to the doctor’s office or hospital.
Analyze the advantages and disadvantages of using mobile computing technology to monitor patients.
Assess the security concerns with regard to the transmission of personal medical information over wireless networks.
Assess the use of social networking for group support for patients with similar medical concerns.
Use at least three (3) quality resources in this assignment. Note: Wikipedia and similar Websites do not qualify as quality resources.
Your assignment must follow these formatting requirements:
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
The specific course learning outcomes associated with this assignment are:
Describe the use of network management, Web, wireless, and mobility technologies.
Outline the strategic implications of information assurance and security in an information technology environment.
Use technology and information resources to research issues in information systems and technology.
Write clearly and concisely about topics related to information systems for decision making using proper writing mechanics and technical style.
Assignment 3: Marketing Plan
Tali Goya
Group Assignment
10/11/2018
Project and Portfolio IV: Entertainment Business
Table of Contents
Executive Summary 3
Situation Analysis 4
Artist Overview 4
SWOT Analysis 4
Strengths 4
Weaknesses 4
Opportunities 4
Treats 4
Competition Analysis 5
Competing Artist Overview 5
Competing Markets 5
Mainstream Trap 5
Hip-hop 5
Reggaeton 5
Social Media Analysis 6
Facebook 6
You Tube 6
Instagram 6
Objective/Strategy 7
Spotify Listenership 7
Radio Interviews 7
Media Release 7
Social Following 7
Artist Alignment 7,8
Global Reach 8
Authenticity 8
References 9
Executive Summary
Juan Miguel Villar aka Tali Goya was born September 28th, 1990 in the Dominican Republic, his family later migrated to New York for a better life. Combining his Latin roots with his influential upbringing Tali started his rap career utilizing Latin and Trap sounds. Tali has a sizeable following from international listeners, Tali’s team is aiming to bring Tali mainstream. It is also important for Tali to maintain his authenticity and connection with his international fan base and preserve his sound. In the marketing plan, it has been organized to present a situational, competitive, and social media analysis to assist in formulating a successful marketing tactic for Tali to marketing crossover to mainstream smoothly.
2.0 Situation Analysis
In this situation analysis, we’ll take a quick look at Tali Goya’s Target Market, and his current music scene. After examining the strengths, weaknesses, opportunities, and threats to Tali Goya, we will have identified what is affecting Tali to go mainstream.
2.1 Artist Overview
Tali Goya is currently a Dominican native. Tali is a music artist who has focused his career in making Latin Trap. He is popular in Latin America and in certain communities. At the moment Tali is not signed to a big record label and has had a hard time crossing to mainstream music. The Artist wants to be able to make the switch and not lose the loyal fan base that he already has.
Tali currently has 7 singles and 1 Album. He is currently working on a new album he plans to drop in the next 8-12 weeks. Tali is currently reaching Latin American fans. He is trying to keep them but also gains NYC and Miami fans. Tali currently perform in clubs and events in the States. He does have concerts in Latin America.
2.2 SWOT Analysis
2.2.1 Strengths:
· Tali has a unique sound and very well written music.
· Has featured in some very big Latin American Trap artist like Archangel.
· According to his manager he has built relationships with mainstream artist like Bad Bunny.
· Had constant new content coming out.
2.2.2 Weaknesses:
· Tali’s branding is not very clear and it has not come through his Social Media.
· Tali’s music content is very directed to a specific crowd of people.
· The SEO and Trans media storytelling for Tali is very messy.
2.2.3 Opportunities:
· By having a strategic multiplatform .
Assignment 3 Legal Ethics, Patients’ Rights, and HIV AIDSAs.docxdanielfoster65629
Assignment 3: Legal Ethics, Patients’ Rights, and HIV / AIDS
As the head health care administrator at USA Community Hospital, you are required to review compliance reports on issues relating to the ethical conduct of the professional staff at your hospital, patient review registries, and standard procedures surrounding the ethical treatment of patients with HIV / AIDS. Intermittently, complaints surface from patients with HIV / AIDS concerned with ethical treatment and denial of services.
Note: You may create and / or make all necessary assumptions needed for the completion of this assignment.
Write a six to eight (6-8) page paper in which you:
Devise a plan to investigate the validity of patients’ claims of denial of services. This plan should include, but not be limited to, establishing mechanisms to address service denial claims, a human resources component, and a review of related policies and procedures.
Analyze the primary way in which different staffing levels may play pivotal roles in upholding ethical conduct, including treating patients with dignity. Justify your position.
Formulate a plan to relate the primary legal ramifications to the professional staff regarding ethical treatment of the hospital’s HIV / AIDS patients.
Devise a community relations plan that tout’s the hospital’s unique ways of serving persons with HIV / AIDS, including a focus on de-stigmatizing those afflicted.
Use at least five (5) quality academic resources in this assignment. Note: Wikipedia and other Websites do not quality as academic resources.
This assignment must follow these formatting requirements
:
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
The specific course learning outcomes associated with this assignment are:
Examine the various applications of the law within the health care system.
Identify the principles and legalities of ethical issues within the health care system.
Identify a plan that addresses legal and ethical issues in a health care policy.
Use technology and information resources to research issues in health care policy, law, and ethics.
Write clearly and concisely about health care policy, law, and ethics using proper writing mechanics
.
Assignment 3 Legal Ethics, Patients’ Rights, and HIV AIDSDue We.docxdanielfoster65629
Assignment 3: Legal Ethics, Patients’ Rights, and HIV / AIDS
Due Week 9 and worth 200 points
As the head health care administrator at USA Community Hospital, you are required to review compliance reports on issues relating to the ethical conduct of the professional staff at your hospital, patient review registries, and standard procedures surrounding the ethical treatment of patients with HIV / AIDS. Intermittently, complaints surface from patients with HIV / AIDS concerned with ethical treatment and denial of services.
Note: You may create and / or make all necessary assumptions needed for the completion of this assignment.
Write a six to eight (6-8) page paper in which you:
Devise a plan to investigate the validity of patients’ claims of denial of services. This plan should include, but not be limited to, establishing mechanisms to address service denial claims, a human resources component, and a review of related policies and procedures.
Analyze the primary way in which different staffing levels may play pivotal roles in upholding ethical conduct, including treating patients with dignity. Justify your position.
Formulate a plan to relate the primary legal ramifications to the professional staff regarding ethical treatment of the hospital’s HIV / AIDS patients.
Devise a community relations plan that tout’s the hospital’s unique ways of serving persons with HIV / AIDS, including a focus on de-stigmatizing those afflicted.
Use at least five (5) quality academic resources in this assignment. Note: Wikipedia and other Websites do not quality as academic resources.
Your assignment must follow these formatting requirements:
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
The specific course learning outcomes associated with this assignment are:
Examine the various applications of the law within the health care system.
Identify the principles and legalities of ethical issues within the health care system.
Identify a plan that addresses legal and ethical issues in a health care policy.
Use technology and information resources to research issues in health care policy, law, and ethics.
Write clearly and concisely about health care policy, law, and ethics using proper writing mechanics.
Click
here
to view the grading rubric for this assignment.
.
Assignment 3 Legal Ethics, Patients’ Rights, and HIV AIDS Due W.docxdanielfoster65629
Assignment 3: Legal Ethics, Patients’ Rights, and HIV / AIDS
Due Week 9 and worth 200 points
As the head health care administrator at USA Community Hospital, you are required to review compliance reports on issues relating to the ethical conduct of the professional staff at your hospital, patient review registries, and standard procedures surrounding the ethical treatment of patients with HIV / AIDS. Intermittently, complaints surface from patients with HIV / AIDS concerned with ethical treatment and denial of services.
Note: You may create and / or make all necessary assumptions needed for the completion of this assignment.
Write a six to eight (6-8) page paper in which you:
Devise a plan to investigate the validity of patients’ claims of denial of services. This plan should include, but not be limited to, establishing mechanisms to address service denial claims, a human resources component, and a review of related policies and procedures.
Analyze the primary way in which different staffing levels may play pivotal roles in upholding ethical conduct, including treating patients with dignity. Justify your position.
Formulate a plan to relate the primary legal ramifications to the professional staff regarding ethical treatment of the hospital’s HIV / AIDS patients.
Devise a community relations plan that tout’s the hospital’s unique ways of serving persons with HIV / AIDS, including a focus on de-stigmatizing those afflicted.
Use at least five (5) quality academic resources in this assignment. Note: Wikipedia and other Websites do not quality as academic resources.
Your assignment must follow these formatting requirements:
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
The specific course learning outcomes associated with this assignment are:
Examine the various applications of the law within the health care system.
.
Assignment 3:
Knowledge Instrument – Summative Assessment
Candidates will create one knowledge instrument that is designed to assess a student’s progress in a course. Candidates will design an assessment to assess what a student has learned and understands. In addition to the assessment, candidates will provide a 1-page document outlining the approach used in the assessment design.
Target Audience:
· Students completing a Grade 12 class of your choice.
Secondary Audience:
· Professor
Rationale and Guiding Questions:
1. What is the purpose of your assessment?
2. Identify the content (goals/outcomes) that are going to be assessed by this summative assessment.
What factors did you consider when designing your assessment?
.
Assignment 3 Juvenile ProbationIn many ways, juvenile probation i.docxdanielfoster65629
Assignment 3: Juvenile Probation
In many ways, juvenile probation is similar to adult probation. Both types of probation involve sanctions imposed by the court, necessitating close supervision of the offender, coupled with the looming threat of a more severe punishment, typically incarceration, if the offender fails to comply with the conditions stipulated in his or her probation.
Given the inherent complexity of working with juveniles, juvenile probation includes components, rules, and processes not found in adult probation. For example, probation officers must take into account factors such as school and parental wishes while determining how a particular case should be handled. These factors are not taken into consideration in adult probation. Also, juvenile probation officers must contend with and account for the inclusion of status offenses, which can be more difficult to track and monitor.
Tasks:
Prepare a 3- to 5-page report on your local juvenile probation department. In your report:
Describe the types of juvenile cases that your local juvenile probation department has taken care of in the past.
Locate and comment on the following:
The department’s mission and vision statement
Whether the juvenile department is located with the adult probation department and community corrections
The number of services aimed toward juveniles
The statistics that demonstrate the department’s effectiveness
State the overall assessment of your local juvenile probation department. Explain based on your research whether you think the department is run well. Does the department meet the needs of local youth? Support your answer with evidence.
.
Assignment 3 Grading Criteria
Maximum Points
Describe steps taken to prepare for the interview and submit the questions you will use in the interview.
20
Describe what factors made the interview difficult or uncomfortable and the factors that made the interview welcoming and comfortable.
25
State how effective you were in probing and obtaining information. Discuss what you would do differently if you had to do the interview over.
20
Justify ideas and responses by using appropriate examples and references from text, peer-reviewed research articles, appropriate professional field-related Web sites, and personal experience.
15
Wrote in a clear, concise, and organized manner; demonstrated ethical scholarship in accurate representation and attribution of sources, displayed accurate spelling, grammar, and punctuation
20
Total:
100
.
Assignment 3 Gender IdentityWe are socialized at every stage in l.docxdanielfoster65629
Assignment 3: Gender Identity
We are socialized at every stage in life to conform to our gender identity. Societal reinforcement of tendencies of gender identity is relentless. For example, in hospitals, little girls are wrapped in pink and little boys in blue. This difference in colors influences how we learn and how we internalize our role in our society.
Girls tend to grow up to play feminine roles and boys tend to grow up to play masculine roles. This differentiation of gender identity has implications in social stratification. The videos given below will provide you with a better understanding of the differentiation of sexual identity from an earlier generation.
Search for and watch an episode of at least one of the following shows. You may find these videos using a variety of search methods including visiting your local library, using Netflix or your local video store, or searching on YouTube. If you have difficulty locating an episode of one of the following shows, contact your instructor for assistance in finding an alternative.
I Love Lucy
All in the Family
The Mickey Mouse Club
The Honeymooners
Leave it to Beaver
Father Knows Best
Gilligan’s Island
The Brady Bunch
I Dream of Jeannie
As you watch the video, ask yourself the following questions:
To what extent have things changed and to what extent have they remained the same in regards to gender roles, expectations, division, and identity from the time this show was originally popular and today?
How conscious and sensitive are the characters regarding gender prejudice, power inequality, and subordination?
Did they take inequality of the sexes for granted?
Based on your readings and understanding that you have gathered after watching the above-noted video, write a short biographical description of your life if you were to wake up tomorrow morning in the time period of the video you watched and find you have a different gender identity. Write a description of how you lived your life a day after your hypothetical change in gender as you answer the following questions
Discuss how you would react on finding out that your sex is opposite. Would you feel a sense of relief, indifference, or elation? Why?
Discuss three ways your attitude towards the opposite sex was enlightened or would change as a result of what you learned from this project. If you would not change your attitude, why?
Write down the ideas and attitudes you have taken for granted a member of your actual gender. Consider how your roles at home and in the office would change if you were a member of the opposite gender.
Relate the ideas of sexism and racism to the videos. How do you think sexism and racism have changed since the 1950s?
Use the following file naming convention: LastnameFirstInitial_M1_A3.doc. For example, if your name is John Smith, your document will be named SmithJ_M1_A3.doc.
By
Wednesday, August 27, 2014
, deliver your assignment to the
M1: Assignment 3 Dropbox
.
Assignment 3 Grading Criteria
Maximum Poi.
Assignment 4 Impressions of Museum or Gallery Exhibit$20The Bro.docxdanielfoster65629
Assignment 4: Impressions of Museum or Gallery Exhibit$20
The Brooks Museum Memphis TN.
· Submit your cultural event choice to the instructor for approval before the end of Week 5.
· Visit a museum or gallery exhibition of modern art before the end of Week 9.
· Write a report of the visit.
· Summarize the report in a PowerPoint presentation.
Write a three to four (3-4) page paper (750-1,000 words) in which you:
1. Identify the date visited, location, name, and background of the museum or specific exhibition. (If virtual, identify the Website along with the other information.)
2. Describe three (3) works, noting the artist, title, subject, and the time period of each work.
3. Compare the style, influences, and meaning or intent of each piece, highlighting any changes (if any) from the first to last piece.
4. Explain your reasons for selecting the pieces in a discussion of the reasons for the artist’s popularity and / or impact on the art world.
5. Summarize the main points of three (3) works discussed in your paper in a PowerPoint presentation of at least three (3) slides. Each of the slides should have three to four (3-4) short bullet points and notes about the works in the slide notes section. Include a cover page for the PowerPoint. Add the slides with notes to your paper.
6. Include four (4) references that help support your claims. (The text may be used as one (1) reference.)
Discussion Question
The New Realism and Pop Art
Class, please respond to at least one of the following prompts:
· Speculate on the reasons for the emergence of the New Realism (le nouveau realisme).
· Compare and contrast the works of a representative artist of New Realism with a representative artist of Europe’s Pop Art, highlighting the media, objects, and the possible intent of the artist in the specific work.
· How does the Sydney Opera House compare with the Internationalist architectural style? Why is it often considered a modern work of art?
Themes in Neo-Expressionism and Neo-Conceptualism
Please respond to the following:
· Explain Fischl’s comment about his painting, Cargo Cults (for DS “King Kong”), and how it reflects his views and themes of Neo-Expressionism: “The longer you look at [the picture] the more you realize that the point of view is not the victimizer’s but the victim’s. I think [a] painting is successful precisely because it stirs your preconceptions – and then becomes a clearer, more dimensional reality. I start off despising these people and work toward compassion.”
· Compare and contrast Neo-Conceptualism and Neo-Expressionism, highlighting a representative artist and his / her work from each movement to illustrate two similarities and two differences.
.
Assignment 4 Informative Report – DraftChoose a familia.docxdanielfoster65629
Assignment 4: "Informative Report – Draft"
Choose a familiar household appliance (e.g., vacuum, toaster, hair dryer).
Write a one to two (1-2) page mechanism description (written in your own words) telling an audience of fifth graders in a science class how the appliance works. The document must include:
a. Headingsb. At least one graphicc. A logical spatial order
In your document, you should:
Ensure the document is clear and brief.
Exercise logic in your design, including placement of headers and graphics.
Use appropriate language for the audience and purpose.
Follow the steps identified in the textbook.
Cite source(s), including any graphics.
.
Assignment 4 Excel ProblemsAt the end of each module, you will ap.docxdanielfoster65629
Assignment 4: Excel Problems
At the end of each module, you will apply the module’s concepts by completing a comprehensive assignment from the textbook.
Complete these problems from your text book: (
P1-44B page 47
&
P2-46B page 111
) related to transaction analysis, journal entries for typical business transactions, adjusting entries and preparation of the trial balance and adjusted trial balance.
Present your analysis of the assigned problems in Excel format. Enter non-numerical responses in the same worksheet using textboxes.
By
Wednesday, April 23, 2014
deliver your assignment to the
M1: Assignment 4 Dropbox.
P1-44B
Preparing financial statements and evaluating business performance.
Accent Photography works weddings and prom-type parties. The balance of capital was $20,000 at December 31, 2010. At December 31, 2011, the business’ accounting records show these balances:
Insurance expense
$8,000
Cash
$31,000
Accounts payable
$6,000
Advertising Expense
$1,000
Service revenue
$81,000
Owner withdrawal
$15,000
Accounts receivable
$10,000
Note payable
$12,000
Owner equity
?
Salary expense
$27,000
Equipment
$60,000
Owner Investment
$33,000
Prepare the following statements for Accent Photography for the year end December 31, 2011:
Income statement
Statement of owner’s equity
Balance sheet
P2-46B
Analyzing and journalizing transactions, posting, and preparing trial balance.
Warren Smith practices medicine under the business title Warren Smith, M.D. During April, the medical practice completed the following transactions:
Apr 1
Smith deposited $78,000 cash in the business bank account. The business gave capital to Smith.
Apr 5
Paid monthly rent on medical equipment, $780.
Apr 9
Paid $18,000 cash to purchase land for an office site.
Apr 10
Purchased supplies on account, $1,200.
Apr 19
Borrowed $20,000 from the bank for business use. Smith signed a note to the bank in the name of the business.
Apr 22
Paid $800 on the account.
Apr 30
Revenue earned during the month included $5,900 cash and $4,900 on account.
Apr 30
Paid employees’ salaries $2,000, office rent$1,800, and utilities $420. Make a single compound entry.
Apr 30
Owner withdrew $9,000.
The business uses the following accounts:
Cash; Accounts receivable; supplies; Land; Accounts payable; Notes payable; Warren Smith, capital; Warren Smith, withdrawals; Service revenue; Salary expense; rent expense; Utility expense.
Journalize each transaction, as shown for April. Explanations are not required.
April 1
Cash
$78,000
Warren Smith, Capital
$78,000
Post the transactions to the T-accounts, using transaction dates as posting reference in the ledger accounts. Label the balance of each account balance as shown in chapter
Prepare the trial balance of Warren Smith, M.D., at April 30, 2010.
.
Assignment 4 Designing Compliance Within the LAN-to-WAN DomainD.docxdanielfoster65629
Assignment 4: Designing Compliance Within the LAN-to-WAN Domain
Due Week 8 and worth 70 points
Imagine you are an Information Systems Security Officer for a medium-sized technology firm that has two (2) sites (one located in Virginia, and the second in California). Due to the highly sensitive data created, stored, and transported by your organization, the CIO is concerned with implementing proper security controls for the LAN-to-WAN domain. Specifically, the CIO is concerned with the following areas:
Protecting data privacy across the WAN
Filtering undesirable network traffic from the Internet
Filtering traffic to the Internet that does not adhere to the organizational AUP for the Web
Having a zone that allows access for anonymous users but aggressively controls information exchange with internal resources
Having an area designed to trap attackers in order to monitor attacker activities
Allowing a means to monitor network traffic in real time as a means to identify and block unusual activity
Hiding internal IP addresses
Allowing operating system and application patch management
The CIO has tasked you with proposing a series of hardware and software controls designed to provide security for the LAN-to-WAN domain. The CIO anticipates receiving both a written report and diagram(s) to support your recommendations.
Write a four to six (4-6) page paper in which you:
Suggest a solution for the provided scenario that will:
filter undesirable network traffic from the Internet
filter Web traffic to the Internet that does not adhere to the organizational AUP for the Web
allow for a zone for anonymous users but aggressively controls information exchange with internal resources
allow for an area designed to trap attackers in order to monitor attacker activities
offer a means to monitor network traffic in real time as a means to identify and block unusual activity
hide internal IP addresses
Note:
The graphically depicted solution is not included in the required page length.
Analyze and identify the fundamentals of PKI in writing and depict graphically using MS Visio or its open source alternative software.
Note:
The graphically depicted solution is not included in the required page length.
Examine and describe how your solution will protect the privacy of data transmitted across the WAN and why this solution would be effective.
Analyze the requirements necessary to allow for proper operating system and application patch management and describe a solution that would be effective.
Use at least three (3) quality resources in this assignment.
Note:
Wikipedia and similar Websites do not qualify as quality resources.
Your assignment must follow these formatting requirements:
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment,.
Assignment 4 Cultural Information PaperDue in Week 10 and worth.docxdanielfoster65629
Assignment 4: Cultural Information Paper
Due in Week 10 and worth 300 points
Your new employee is going to be moving overseas! Develop a cultural information paper that will help them understand how to make the transition. (NOTE: You are able to choose any country–please make sure the county of choice is logical for the position.)
Include in this paper:
a short introduction to the country,
the local customs,
what to expect, and
a list of what is needed to work in the country.
For example: Certain countries require a work visa. Include the requirements for the work visa.
Include country-specific information needed to live and work in that country such as:
transportation availability,
housing costs,
union influence,
work week,
typical vacation time, and
anything specific to the country we would not experience in the US.
For example: Some countries the children wear uniforms and go to school all year
This paper should be 6-8 pages.
NOTE: The position moving overseas is the job in your description from Week 3. Find creative ways to incorporate your work from that assignment into this one.
Your assignment must follow these formatting requirements:
Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
.
Assignment 4 Constructive DividendsBased on your readings for the.docxdanielfoster65629
Assignment 4: Constructive Dividends
Based on your readings for the module, respond to the following:
Explain the concept of constructive dividends. Give examples.
Construct three original examples of situations in which the IRS might claim constructive dividends.
Suggest ways to ensure that constructive dividends are minimized or eliminated.
Write a three page paper in MS Word format. Apply APA
Use the following file naming convention:
LastnameFirstInitial_M4_A2.doc
. Submit this document to the
M4: Assignment 4 Dropbox
by
October 1, 2014
.
Assignment 4 Grading Criteria
Maximum Points
The concept of constructive dividends was accurately defined and illustrated with original examples.
50
Proposed ways to minimize constructive dividends were effective and feasible.
40
Wrote in a clear, concise, and organized manner; demonstrated ethical scholarship in accurate representation and attribution of sources; displayed accurate spelling, grammar, and punctuation.
10
Total:
100
.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Assignment 3 Management Accounting Case West Island Products.docx
1. Assignment 3: Management Accounting Case: West Island
Products
Due Week 8, Day 7 (100 points)
6 pages
The specific course learning outcomes associated with this
assignment are:
•
Apply key techniques and concepts in measuring the cost of
producing goods and
services.
•
Apply management accounting concepts to identify and process
relevant financial
information for decision-making purposes.
•
Use technology and information resources to research issues in
financial management.
•
2. Write clearly and concisely about financial management using
proper writing mechanics.
Assignment:
West Island Products (WIP) is a divisionalized furniture
manufacturer. The divisions are
autonomous segments with each division responsible for its own
sales, cost of operations, and
equipment acquisition. Divisional performance is evaluated
annually based on ROI. Each division
serves a different market in the furniture industry. Because the
markets and products of the
divisions are so different, there have never been any transfers
between divisions.
The Commercial Division of WIP, manufacturers furniture for
the restaurant industry. The
Commercial Division plans to introduce a new line of counter
chair units featuring a cushioned
seat. Roberta Katz, the Commercial Division manager, has
discussed the manufacturing of the
cushioned seats with Nathan Danielson of the Office Division.
They both believe a cushioned
seat currently made by the Office Division for use on its deluxe
office stool could be modified for
3. use on the new counter chair. Consequently, Katz asked
Danielson for a price for 100-unit lots of
the cushioned seats. The following conversation took place
about the price to be charged for the
cushioned seats.
Danielson:
“Roberta, we can make the necessary modifications to the
cushioned seat easily.
The raw materials used in the new counter chair seat are slightly
different and
should cost about 10 percent more than those used in our deluxe
office stool.
However, the labor time should be the same because the seat
fabrication
process is the same. I would price the cushioned seat at our
regular rate: full cost
plus a 30 percent mark-up. According to my calculations, that
would be $2,053
per lot of 100 seats.”
Katz:
4. “That’s higher than I expected, Nathan. I was thinking that a
good price would be
your variable manufacturing cost. After all, your fixed costs
will be incurred
regardless of this job. In addition, I have received a quote from
one of the
Commercial Division’s regular suppliers to provide us with the
counter seats at
$1,900 per lot of 100 seats.”
Danielson:
“Roberta, I am at full capacity. By making the cushioned seats
for you, I have to
cut my production of deluxe office stools. The labor time freed
by not having to
fabricate the frame and assemble the deluxe stool can be shifted
to the
production of the economy stool. I’d like to sell the cushioned
seats to you at my
variable cost, but I have excess demand for both products. I
don’t mind changing
my product mix to the economy model and producing the
cushioned seats for
6. important potential customers. Our outside supplier claims that
they can meet our
timing needs.”
Danielson:
“Oh-oh. That lead-time is a bit short considering the production
re-scheduling we
need to do. I can’t promise you a lead-time shorter than four
weeks at the
moment.”
Katz:
“There’s quite a few issues that need to be addressed here,
Nathan. As we have
no previous experience in transferring goods between our
divisions, I think we
should speak with the controller at corporate headquarters
before we can agree
on a transfer price.”
Exhibit 1 – Office Division Standard Costs and Prices
11. transfer disputes in the future
(i.e., what policies would you suggest putting in place)? Make
sure your recommendation
includes financial policies around setting a transfer price range.
Support your suggestion
by examining the advantages and disadvantages of its adoption.