Arduino uno rev3-schematic
•
0 likes•551 views
This document lists the pin connections and functions for an microcontroller. It identifies the pin number, pin name, and pin function for various input, output, power and clock pins including analog and digital pins connected to peripherals like timers, serial ports, and interrupts. The pinout is shown using a table format with columns for pin number and name/function.
Report
Share
Report
Share
Download to read offline
Recommended
Schematic amp
This document contains a circuit diagram for an amplifier. It includes a list of components used in the circuit such as transistors, resistors, capacitors and other electrical components. The diagram shows how the components are connected to create the amplifier circuit. Labels on the diagram indicate power sources, inputs, outputs and other connections between the various components that make up the amplifier.
neoplex pcr test kit [genematrix] compatible instruments for neoplex(gene_mat...
compatable instruments Sheet for Neoplex pcr test kits a product by Gene matrix. sales partner biotech commerce
Spice Park 256 Free Spice Model 29MAY2015
This document provides a list of 256 free SPICE models from SPICE PARK organized by component type. The majority of the models are for general purpose rectifier diodes from various manufacturers like ROHM, Toshiba, and Shindengen. Other components included are MOSFETs, BJTs, voltage regulators, photocouplers, and various digital ICs. For each component, the document provides manufacturer and part number details for the SPICE models available in PSpice and LTspice formats.
Spice Park 238 Free Spice Model 15 MAY2015
This document provides a list and descriptions of 238 free SPICE models from Spice Park. It includes models for various components like diodes, transistors, regulators, and ICs from manufacturers like ROHM, Toshiba, and Panasonic. The models are available in PSpice and LTSpice formats. The largest category is general purpose rectifier diodes with 176 models from manufacturers like ROHM, Toshiba, and Shindengen.
Microcontrolador Solidworks
This document is a report on an exercise using a microcontroller. It includes a table with the pin names and numbers for an ATmega328P microcontroller. The microcontroller is connected to an LED on pin 22 through resistor R2, and receives power from a 5V supply through a 0.1uF capacitor C1 connected from the power to ground.
Protocolo de enlace Polling e Selecting
Protocolo de enlace e de nivel físico passo a passo. Polling e Selecting com retransmissão, Not Receive Ready (selecting) e processor Times Out (polling).
2 d, 3d & assembly drawings 123
The document discusses CAD/CAM software from MurthalCAD. It covers topics such as orthographic views, part modeling, assembly, and other CAD/CAM functions. The document appears to be an overview or manual for the MurthalCAD software.
Vialourdes3.3 PLANO ALUMBRADO
This document contains a list of codes and abbreviations related to electrical infrastructure components. It includes codes for things like transformers, cables, luminaires, switches, and more. Diagrams are also provided showing common symbols used for components in electrical plans and schematics.
Recommended
Schematic amp
This document contains a circuit diagram for an amplifier. It includes a list of components used in the circuit such as transistors, resistors, capacitors and other electrical components. The diagram shows how the components are connected to create the amplifier circuit. Labels on the diagram indicate power sources, inputs, outputs and other connections between the various components that make up the amplifier.
neoplex pcr test kit [genematrix] compatible instruments for neoplex(gene_mat...
compatable instruments Sheet for Neoplex pcr test kits a product by Gene matrix. sales partner biotech commerce
Spice Park 256 Free Spice Model 29MAY2015
This document provides a list of 256 free SPICE models from SPICE PARK organized by component type. The majority of the models are for general purpose rectifier diodes from various manufacturers like ROHM, Toshiba, and Shindengen. Other components included are MOSFETs, BJTs, voltage regulators, photocouplers, and various digital ICs. For each component, the document provides manufacturer and part number details for the SPICE models available in PSpice and LTspice formats.
Spice Park 238 Free Spice Model 15 MAY2015
This document provides a list and descriptions of 238 free SPICE models from Spice Park. It includes models for various components like diodes, transistors, regulators, and ICs from manufacturers like ROHM, Toshiba, and Panasonic. The models are available in PSpice and LTSpice formats. The largest category is general purpose rectifier diodes with 176 models from manufacturers like ROHM, Toshiba, and Shindengen.
Microcontrolador Solidworks
This document is a report on an exercise using a microcontroller. It includes a table with the pin names and numbers for an ATmega328P microcontroller. The microcontroller is connected to an LED on pin 22 through resistor R2, and receives power from a 5V supply through a 0.1uF capacitor C1 connected from the power to ground.
Protocolo de enlace Polling e Selecting
Protocolo de enlace e de nivel físico passo a passo. Polling e Selecting com retransmissão, Not Receive Ready (selecting) e processor Times Out (polling).
2 d, 3d & assembly drawings 123
The document discusses CAD/CAM software from MurthalCAD. It covers topics such as orthographic views, part modeling, assembly, and other CAD/CAM functions. The document appears to be an overview or manual for the MurthalCAD software.
Vialourdes3.3 PLANO ALUMBRADO
This document contains a list of codes and abbreviations related to electrical infrastructure components. It includes codes for things like transformers, cables, luminaires, switches, and more. Diagrams are also provided showing common symbols used for components in electrical plans and schematics.
Seminário de Sistemas Embarcados - Análise sobre Super Nintendo e PlayStation 4
Material utilizado para o seminário na disciplina de Sistemas Embarcados pertencente ao PPGComp/FURG.
Abordagem sobre arquitetura computacional, organização de computadores e tópicos embarcados utilizando como estudo os vídeo-games Super Nintendo (SNES) e PlayStation 4 (PS4).
Eficiência Energética & Evolução dos Dispositivos Móveis
Trabalho realizado na disciplina de arquitetura de computadores, do mestrado em Engenharia da Computação.
FURG - Universidade Federal do Rio Grande.
Reconhecimento de Modelos 3D em Realidade Aumentada Móvel
Trabalho de análise e apresentação do artigo para a disciplina de Ambientes Mistos.
Artigo: CUPERSCHMID, Ana Regina M.; RUSCHEL, Regina Coeli; DE G MONTEIRO, Ana Maria R. Reconhecimento de modelos 3D em realidade aumentada móvel. In: Proceedings of the 12th Brazilian Symposium on Human Factors in Computing Systems. Brazilian Computer Society, 2013. p. 288-291.
Ações de Controle Básica e Controladores Automáticos Industriais
O documento discute diferentes tipos de controladores automáticos industriais, incluindo controladores de duas posições, proporcionais, integrais, proporcionais e integrais, proporcionais e derivativos, e proporcionais, integrais e derivativos. Também compara sistemas pneumáticos e hidráulicos, e discute o uso de amplificadores operacionais em controladores eletrônicos.
Análise da Resposta Transitória
O documento discute fundamentos de sistemas de controle dinâmicos, incluindo análise de sinais de controle, sinais típicos de teste, sistemas de primeira e segunda ordem, e análise da resposta transitória usando Matlab. Exemplos de circuitos RC e RLC são dados para ilustrar sistemas de primeira e segunda ordem.
Sistemas supervisórios (SCADA Systems)
O documento discute sistemas SCADA, que monitoram e controlam variáveis e dispositivos em processos industriais usando software. Ele descreve os principais componentes, modos de comunicação e arquiteturas de sistemas SCADA, além de apresentar uma atividade prática com Arduino e sensor LDR.
Sistemas Supervisórios
O documento apresenta informações sobre sistemas supervisórios industriais, incluindo suas aplicações, arquitetura, componentes e produtos da empresa Altus. Também resume a experiência do autor com sistemas ERP, PCP, SCADA e sua pesquisa sobre supervisão industrial e gerenciamento da cadeia de suprimentos na Indústria 4.0.
Cloud of Things - Onde eu me encaixo?
Palestra contemplando teorias e métodos para trabalhar com IoT e suas derivadas.
Palestra para Semana Acadêmica do Curso de Tecnologia em Análise e Desenvolvimento de Sistemas - IFRS - Campus Rio Grande - RS [Rio Grande - 02/06/2015]
Crimes Virtuais - "A Arte de Iludir"
O documento discute vários tipos de fraudes e golpes, incluindo engenharia social, phishing por telefone, spam e botnets. Ele fornece exemplos de como os dados pessoais e financeiros das pessoas podem ser comprometidos e explorados através de táticas enganosas.
Aula 01 automação e controle
Este documento descreve um curso de Automação e Controle lecionado na Universidade Federal Rural do Semi-Árido. O curso aborda conceitos de automação industrial, programação de controladores lógicos programáveis e sistemas supervisórios, avaliações, cronograma e bibliografia básica e complementar.
Automação e controle introdução
O documento introduz o tema de Controle e Automação, definindo-o como a integração de engenharia mecânica, eletrônica e ciências da computação com o objetivo de melhorar processos industriais e produtos. Também discute como a automação está presente no cotidiano e quais são suas vantagens, como maior qualidade, produtividade e controle a um menor custo.
Palestra - Realidade Aumentada: Tecnologias e Aplicações
O documento apresenta conceitos e tecnologias de realidade aumentada, incluindo dispositivos, softwares e aplicações. Aborda temas como reconhecimento de imagem e padrões, plataformas de desenvolvimento, desafios e aplicações em setores como aviação, medicina e indústria.
Indústria 4.0 - A nova revolução industrial
A apresentação discute a Indústria 4.0, a quarta revolução industrial impulsionada pela internet das coisas. Ela explica como as tecnologias digitais como visão computacional, RFID, NFC e internet das coisas estão permitindo que as fábricas se tornem mais inteligentes e automatizadas.
Schematic of easybee
This is the schematic of AVR board with zigbee rf module that i designed to be part of the final year project
Arduino mega-schematic
This document provides a schematic for an Arduino Mega board. It shows the pin connections for the ATmega1280 microcontroller and other components including an FT232RL USB interface chip. Numerous pins are broken out to headers, interfaces and analog/digital inputs. Power is supplied through a USB or external power input connection.
atmega8
This document summarizes the features of the Atmel ATmega8L and ATmega8 microcontrollers. It includes:
- Details on the 8-bit RISC architecture, registers, speed grades up to 16MHz, and low power consumption.
- On-chip memory features including 8K flash, 512B EEPROM, and 1KB SRAM with high endurance and long data retention.
- Peripheral features such as timers, PWM, ADC, serial interfaces, and analog comparator.
- Package options, pin configurations, and operating voltages from 2.7V to 5.5V.
ARDUINO ANIMAL REPELLANT 2.PDF
This document provides a circuit diagram for an Arduino-based animal repellent system. The key components in the circuit are four PIR sensors to detect motion, an ultrasonic sensor to detect distance, an Arduino Uno microcontroller, an LCD display, and components to power the circuit and produce sound from a buzzer. The circuit aims to detect motion with the PIR sensors and use the ultrasonic sensor and buzzer to scare away detected animals.
PCIeDuino328 Schematic v1
This document is a schematic for a PCIeDuino328v1 board. It contains an ATmega328P microcontroller connected to various pins, interfaces and peripherals including digital and analog pins connected to headers, an 8MHz crystal oscillator, USB-to-TTL serial chip, voltage regulators, and other common components. The schematic also includes power and reset connections, and pin labels for the microcontroller and other ICs.
Avr Development board
This is the AVR development board that i created to be used for all the development work in my 3rd year and final year of the project
Edu ciaa-nxp pinout-a4_v4r3_es
This document provides a pinout diagram and descriptions for an NXP LPC4337 microcontroller board. It lists the pin numbers, pin names, and assigned functions for each of the 40 pins on the microcontroller as well as additional components on the board like jumpers, buttons, and connectors. The pin functions include digital and analog I/O, serial communication protocols, GPIO, LCD, and more. Notes are included about jumpers for RS485 communication and a reset button.
At89c51 datasheet
The AT89C51 is a low-power, high-performance 8-bit microcontroller with 4K bytes of flash memory. It has 32 I/O lines, two 16-bit timer counters, serial communication capabilities, and on-chip programming. The device operates between 0 and 24 MHz and has various power saving modes like idle and power down to reduce power consumption. It is compatible with the MCS-51 instruction set and provides a cost-effective solution for embedded applications.
Sistem all tanpa sound dan sensor garis
This document contains a circuit diagram for a smart stove system. It includes components like sensors, microcontrollers, motors, and indicators. Lines and labels show how various parts like the microcontroller, sensors, motors, and buttons are connected. Key parts include an Arduino microcontroller, gas sensors, temperature sensors, motors for fans and an extinguisher, and LED indicators.
More Related Content
Viewers also liked
Seminário de Sistemas Embarcados - Análise sobre Super Nintendo e PlayStation 4
Material utilizado para o seminário na disciplina de Sistemas Embarcados pertencente ao PPGComp/FURG.
Abordagem sobre arquitetura computacional, organização de computadores e tópicos embarcados utilizando como estudo os vídeo-games Super Nintendo (SNES) e PlayStation 4 (PS4).
Eficiência Energética & Evolução dos Dispositivos Móveis
Trabalho realizado na disciplina de arquitetura de computadores, do mestrado em Engenharia da Computação.
FURG - Universidade Federal do Rio Grande.
Reconhecimento de Modelos 3D em Realidade Aumentada Móvel
Trabalho de análise e apresentação do artigo para a disciplina de Ambientes Mistos.
Artigo: CUPERSCHMID, Ana Regina M.; RUSCHEL, Regina Coeli; DE G MONTEIRO, Ana Maria R. Reconhecimento de modelos 3D em realidade aumentada móvel. In: Proceedings of the 12th Brazilian Symposium on Human Factors in Computing Systems. Brazilian Computer Society, 2013. p. 288-291.
Ações de Controle Básica e Controladores Automáticos Industriais
O documento discute diferentes tipos de controladores automáticos industriais, incluindo controladores de duas posições, proporcionais, integrais, proporcionais e integrais, proporcionais e derivativos, e proporcionais, integrais e derivativos. Também compara sistemas pneumáticos e hidráulicos, e discute o uso de amplificadores operacionais em controladores eletrônicos.
Análise da Resposta Transitória
O documento discute fundamentos de sistemas de controle dinâmicos, incluindo análise de sinais de controle, sinais típicos de teste, sistemas de primeira e segunda ordem, e análise da resposta transitória usando Matlab. Exemplos de circuitos RC e RLC são dados para ilustrar sistemas de primeira e segunda ordem.
Sistemas supervisórios (SCADA Systems)
O documento discute sistemas SCADA, que monitoram e controlam variáveis e dispositivos em processos industriais usando software. Ele descreve os principais componentes, modos de comunicação e arquiteturas de sistemas SCADA, além de apresentar uma atividade prática com Arduino e sensor LDR.
Sistemas Supervisórios
O documento apresenta informações sobre sistemas supervisórios industriais, incluindo suas aplicações, arquitetura, componentes e produtos da empresa Altus. Também resume a experiência do autor com sistemas ERP, PCP, SCADA e sua pesquisa sobre supervisão industrial e gerenciamento da cadeia de suprimentos na Indústria 4.0.
Cloud of Things - Onde eu me encaixo?
Palestra contemplando teorias e métodos para trabalhar com IoT e suas derivadas.
Palestra para Semana Acadêmica do Curso de Tecnologia em Análise e Desenvolvimento de Sistemas - IFRS - Campus Rio Grande - RS [Rio Grande - 02/06/2015]
Crimes Virtuais - "A Arte de Iludir"
O documento discute vários tipos de fraudes e golpes, incluindo engenharia social, phishing por telefone, spam e botnets. Ele fornece exemplos de como os dados pessoais e financeiros das pessoas podem ser comprometidos e explorados através de táticas enganosas.
Aula 01 automação e controle
Este documento descreve um curso de Automação e Controle lecionado na Universidade Federal Rural do Semi-Árido. O curso aborda conceitos de automação industrial, programação de controladores lógicos programáveis e sistemas supervisórios, avaliações, cronograma e bibliografia básica e complementar.
Automação e controle introdução
O documento introduz o tema de Controle e Automação, definindo-o como a integração de engenharia mecânica, eletrônica e ciências da computação com o objetivo de melhorar processos industriais e produtos. Também discute como a automação está presente no cotidiano e quais são suas vantagens, como maior qualidade, produtividade e controle a um menor custo.
Palestra - Realidade Aumentada: Tecnologias e Aplicações
O documento apresenta conceitos e tecnologias de realidade aumentada, incluindo dispositivos, softwares e aplicações. Aborda temas como reconhecimento de imagem e padrões, plataformas de desenvolvimento, desafios e aplicações em setores como aviação, medicina e indústria.
Indústria 4.0 - A nova revolução industrial
A apresentação discute a Indústria 4.0, a quarta revolução industrial impulsionada pela internet das coisas. Ela explica como as tecnologias digitais como visão computacional, RFID, NFC e internet das coisas estão permitindo que as fábricas se tornem mais inteligentes e automatizadas.
Viewers also liked (13)
Seminário de Sistemas Embarcados - Análise sobre Super Nintendo e PlayStation 4
Seminário de Sistemas Embarcados - Análise sobre Super Nintendo e PlayStation 4
Eficiência Energética & Evolução dos Dispositivos Móveis
Eficiência Energética & Evolução dos Dispositivos Móveis
Reconhecimento de Modelos 3D em Realidade Aumentada Móvel
Reconhecimento de Modelos 3D em Realidade Aumentada Móvel
Ações de Controle Básica e Controladores Automáticos Industriais
Ações de Controle Básica e Controladores Automáticos Industriais
Palestra - Realidade Aumentada: Tecnologias e Aplicações
Palestra - Realidade Aumentada: Tecnologias e Aplicações
Similar to Arduino uno rev3-schematic
Schematic of easybee
This is the schematic of AVR board with zigbee rf module that i designed to be part of the final year project
Arduino mega-schematic
This document provides a schematic for an Arduino Mega board. It shows the pin connections for the ATmega1280 microcontroller and other components including an FT232RL USB interface chip. Numerous pins are broken out to headers, interfaces and analog/digital inputs. Power is supplied through a USB or external power input connection.
atmega8
This document summarizes the features of the Atmel ATmega8L and ATmega8 microcontrollers. It includes:
- Details on the 8-bit RISC architecture, registers, speed grades up to 16MHz, and low power consumption.
- On-chip memory features including 8K flash, 512B EEPROM, and 1KB SRAM with high endurance and long data retention.
- Peripheral features such as timers, PWM, ADC, serial interfaces, and analog comparator.
- Package options, pin configurations, and operating voltages from 2.7V to 5.5V.
ARDUINO ANIMAL REPELLANT 2.PDF
This document provides a circuit diagram for an Arduino-based animal repellent system. The key components in the circuit are four PIR sensors to detect motion, an ultrasonic sensor to detect distance, an Arduino Uno microcontroller, an LCD display, and components to power the circuit and produce sound from a buzzer. The circuit aims to detect motion with the PIR sensors and use the ultrasonic sensor and buzzer to scare away detected animals.
PCIeDuino328 Schematic v1
This document is a schematic for a PCIeDuino328v1 board. It contains an ATmega328P microcontroller connected to various pins, interfaces and peripherals including digital and analog pins connected to headers, an 8MHz crystal oscillator, USB-to-TTL serial chip, voltage regulators, and other common components. The schematic also includes power and reset connections, and pin labels for the microcontroller and other ICs.
Avr Development board
This is the AVR development board that i created to be used for all the development work in my 3rd year and final year of the project
Edu ciaa-nxp pinout-a4_v4r3_es
This document provides a pinout diagram and descriptions for an NXP LPC4337 microcontroller board. It lists the pin numbers, pin names, and assigned functions for each of the 40 pins on the microcontroller as well as additional components on the board like jumpers, buttons, and connectors. The pin functions include digital and analog I/O, serial communication protocols, GPIO, LCD, and more. Notes are included about jumpers for RS485 communication and a reset button.
At89c51 datasheet
The AT89C51 is a low-power, high-performance 8-bit microcontroller with 4K bytes of flash memory. It has 32 I/O lines, two 16-bit timer counters, serial communication capabilities, and on-chip programming. The device operates between 0 and 24 MHz and has various power saving modes like idle and power down to reduce power consumption. It is compatible with the MCS-51 instruction set and provides a cost-effective solution for embedded applications.
Sistem all tanpa sound dan sensor garis
This document contains a circuit diagram for a smart stove system. It includes components like sensors, microcontrollers, motors, and indicators. Lines and labels show how various parts like the microcontroller, sensors, motors, and buttons are connected. Key parts include an Arduino microcontroller, gas sensors, temperature sensors, motors for fans and an extinguisher, and LED indicators.
Esquema eletrico kxh30 v1.1 13
This document provides a summary of a circuit diagram for a sliding actuator central control system with a Hall effect end of course sensor. It includes a microcontroller that controls relays to power the actuator motor in both directions and receives signals from sensors like the Hall effect sensor and a photocell to indicate position. The system also has LED indicators for status and uses additional components like transistors, resistors, and capacitors to regulate voltage and condition signals throughout the circuit.
LG CRT TV MODEL Ct 21q92ke
This document provides a service manual for a Commander Dest. Chassis television. It includes schematic diagrams and descriptions of the A board components, including integrated circuits, transistors, and other parts. Voltage measurements are provided for testing various points on the A board. The manual also contains a parts list noting differences for specific TV models.
Signal alert system using rf transmitter&reciever
This document contains a circuit diagram for a microcontroller-based system with an LCD display, code transmitter, and code receiver. The system includes a 89s51 microcontroller, LCD display, infrared transmitter and receiver modules, and various supporting components like resistors, capacitors, and voltage regulators. The transmitter section uses an HT12E encoder IC to generate codes which are transmitted via an infrared LED. The receiver section uses an HT12D decoder IC and infrared detector to receive codes which are sent to the microcontroller inputs.
Arduino uno-schematic reference design
This document contains a schematic diagram for an Arduino Uno reference design board. It shows the microcontroller, voltage regulators, oscillators, USB interface, I/O pins, and other components that make up the board. Arduino provides these reference designs to customers but does not guarantee their functionality or suitability for any purpose. The designs are subject to change without notice.
At mega16 summary
This document summarizes the features and specifications of the ATmega16 microcontroller. It has a low-power 8-bit AVR processor with 16K bytes of flash memory, 512 bytes of EEPROM, and 1K byte of SRAM. It includes timers, PWM channels, ADC, serial interfaces, and I/O pins. The microcontroller supports in-system programming of its flash memory and operates between 0-16MHz with voltages from 2.7-5.5V.
so do nguyen ly.pdf
This document provides a pinout diagram for a microcontroller and motor driver circuit. It lists the pin assignments and connections for a PIC16F887 microcontroller, L298 motor driver, LCD display, and includes 10k resistor connections to Vcc and ground for the microcontroller reset pin. The motor driver controls 4 DC motors via the microcontroller output pins and receives power from a 5V source.
93 appendix pic18(l)f2 x4xk22 (1)
This document describes the PIC18LF46K22 microcontroller. It has a high-performance RISC CPU, up to 64KB of program memory, up to 4KB of data memory, and various analog and peripheral features. It supports low power sleep modes down to 20nA. It has various oscillator, analog, communication, and I/O options. The document provides pinout diagrams and summaries of the available pins and their functions for the 28, 40, and 44 pin package options.
MICROCONTROLADORES PIC Y ATMEGA AVR
This document contains a schematic for a circuit using a PIC16F887 microcontroller. Key components include:
- A PIC16F887 microcontroller
- An 8MHz crystal for the microcontroller clock
- Capacitors to form the crystal oscillator
- An LCD display connected to multiple ports of the microcontroller
QwikFlash Schematic.pdf
This document is a circuit diagram for an educational electronics board. It shows the connections between various electrical components on the board including a PIC18F452 microcontroller, potentiometer, LEDs, push buttons, temperature sensor, and LCD display. The diagram also indicates the pin connections of connectors, power supply, and debugging hardware for the board.
Valleylab_Force_2_Electrosurgical_Generator_-_Schematics.pdf
The document contains schematics and layout diagrams for various boards for the Force 2 electrosurgical generator, including:
- Power supply board schematics and layout across 6 pages
- Interface board schematics across 3 pages
- Monopolar control/display board layout and schematics across 13 pages
It provides detailed circuit diagrams and component information for the boards that make up the internal electronics of the Force 2 electrosurgical generator.
Audiodaq b
The document contains design files for the layers of a printed circuit board (PCB). It includes files for the top and bottom copper, paste, and silkscreen layers that define the traces and components. It also contains files showing 1:1 scale views of the individual layers and combined views of the top and bottom layers. The files provide the design specifications needed to manufacture the PCB.
Similar to Arduino uno rev3-schematic (20)
Valleylab_Force_2_Electrosurgical_Generator_-_Schematics.pdf
Valleylab_Force_2_Electrosurgical_Generator_-_Schematics.pdf
Recently uploaded
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Arduino uno rev3-schematic
- 1. (ADC5)PC5 28 (ADC4)PC4 27 (ADC3)PC3 26 (ADC2)PC2 25 (ADC1)PC1 24 (ADC0)PC0) 23 (SCK)PB5 19 (MISO)PB4 18 (MOSI)PB3 17 (SS)PB2 16 (OC1)PB1 15 (ICP)PB0 14 (AIN1)PD7 13 (AIN0)PD6 12 (T1)PD5 11 (T0)PD4 6 (INT1)PD3 5 (INT0)PD2 4 (TXD)PD1 3 (RXD)PD0 2 GND8 VCC7 AVCC20 AREF21 XTAL19 XTAL210 RESET1 AGND22 1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 11 22 3 3 1 2 3 4 P$1P$1 P$2P$2 1 IN3 OUT 4 2 (AIN0/INT1)PD1 7 (AIN2/PCINT11)PC2 5 (CTS/HWB/AIN6/TO/INT7)PD7 13 (INT4/ICP1/CLK0)PC7 22 (INT5/AIN3)PD4 10 (OC0B/INT0)PD0 6 (OC1A/PCINT8)PC6 23 (PCINT5)PB5 19 (PCINT6)PB6 20 (PCINT7/OC0A/OC1C)PB7 21 (PCINT9/OC1B)PC5 25 (PCINT10)PC4 26 (PD0/MISO/PCINT3)PB3 17 (PDI/MOSI/PCINT2)PB2 16 (RTS/AIN5/INT6)PD6 12 (RXD1/AIN1/INT2)PD2 8 (SCLK/PCINT1)PB1 15 (SS/PCINT0)PB0 14 (T1/PCINT4)PB4 18 (TXD1/INT3)PD3 9 (XCK/AIN4/PCINT12)PD5 11 AVCC32 D+29 D-30 GND3 PAD33 RESET(PC1/DW)24 UCAP27 UGND28 UVCC31 VCC4 XTAL11 XTAL2(PC0)2 1 2 3 4 5 6 2 1 21 18 27 36 45 1827 36 45 18 27 3 6 4 5 18 2 7 3 6 45 12 34 2 3 1 6 5 7 84 1 2 3 4 5 IN1 ON/OFF3 NC/FB 4 OUT 5 GND2 1 2 3 4 5 6 7 8 21