App144 en sorting-shrimps-fish-industry
•
0 likes•140 views
A previously manually adjustable shrimp sorting machine has been retrofitted with an inductive displacement sensor to more reliably control the roll gap and sorting process. The displacement sensor measures the separation between two rolls used to sort shrimp by size, with the gap increasing from 20mm to 40mm. A special version of the LVP displacement sensor with stainless steel housing is used to withstand the harsh cleaning chemicals in the food industry.
Report
Share
Report
Share
Download to read offline
Recommended
Online Inline Viscometer 
The VISCO-VP is a new generation of in-line viscosity meter. The VISCO-VP is a torque -oscillating viscosity meter, which measures the drag of a fluid at the surface of the sensor. The sensor oscillates at its resonance frequency, and the amplitude of the vibration is muted as the viscosity increases. The viscosity can be calculated out of the energy required to keep the amplitude constant. Depending on the process fluid and application, there are various models VISCO-VP for the required measurement range and accuracy.
App153 en thickness-measurement-black-rubber-strip-building-industry
The document discusses using laser-based optical sensors to measure the thickness of black rubber strips produced for the building industry. Two optoNCDT 1700 sensors inside protective housings are used to measure the 5mm or 7mm thickness of the rubber strips after extrusion, compensating for the weak light reflection from the black surface. The non-contact thickness measurements are taken directly after production to allow for quick corrections if needed, and are transmitted to the existing control system. The sensors allow for accurate and fast measurements without safety concerns around emitted radiation.
App084 en on-line-inspection-sealing-compound-covering-lid
The document describes using a laser-based optical displacement measurement system to inspect sealing compound thickness on covering lids during production. The system samples the compound surface of rotating lids to check thickness is within tolerances and sort out faulty lids. It offers accurate, fast, and reliable non-contact measurements with a small light spot diameter while being laser safety class 2.
Leaf Area Meter by ACMAS Technologies Pvt Ltd.
This document describes a leaf area meter made by Weiber's. It is a compact, tabletop instrument that can accurately measure the area of leaves as well as other flat materials like cloth, paper, plastics, and leather. The leaf area meter uses photometric technology and has a precision of +/- 2%. It stores up to 200 data groups and has an RS 232 C interface connection.
Sfct e brochure
Sureflo Clean Technologies provides customized solutions for filtration, separation, and aeration needs. It has over 25 years of experience in water treatment and manufactures equipment using advanced technologies. It offers a wide range of products and services including automatic filters, cyclonic separators, membrane filtration systems, cooling tower cleaning systems, and more. The company has design, manufacturing, and technical tie-up capabilities to meet various industrial and commercial water treatment requirements.
100.timex general product overview
TIMEX Filtration and Water Systems provides a comprehensive line of filtration products and systems for industrial, municipal, agricultural, and domestic applications. It offers automatic self-cleaning filters, basket strainers, hydrocyclone separators, bag filters, cartridge filters, and complete water treatment systems. TIMEX's filtration solutions are customized to meet stringent water quality standards and customers' specific requirements.
Datasheet DO4000 Series - Portable Digital Micro Ohmmeter
The D04000 series offers portable digital micro ohmmeters in three models. They feature easy-to-use keyboards, large LCD screens, automatic or manual ranging, and advanced measurement capabilities. The instruments measure resistance accurately from milliohms to kilohms using a 4-terminal technique that eliminates lead resistance errors. A variety of optional accessories are available.
Suction Unit Catalogue
The document provides information about Anand Medicaids Private Limited, an ISO 9001:2000 and ISO 13485:2003 certified company that manufactures a wide range of suction units. It describes the company's history and facilities, its focus on quality and customer service, and lists several suction unit models along with their specifications.
Recommended
Online Inline Viscometer
The VISCO-VP is a new generation of in-line viscosity meter. The VISCO-VP is a torque -oscillating viscosity meter, which measures the drag of a fluid at the surface of the sensor. The sensor oscillates at its resonance frequency, and the amplitude of the vibration is muted as the viscosity increases. The viscosity can be calculated out of the energy required to keep the amplitude constant. Depending on the process fluid and application, there are various models VISCO-VP for the required measurement range and accuracy.
App153 en thickness-measurement-black-rubber-strip-building-industry
The document discusses using laser-based optical sensors to measure the thickness of black rubber strips produced for the building industry. Two optoNCDT 1700 sensors inside protective housings are used to measure the 5mm or 7mm thickness of the rubber strips after extrusion, compensating for the weak light reflection from the black surface. The non-contact thickness measurements are taken directly after production to allow for quick corrections if needed, and are transmitted to the existing control system. The sensors allow for accurate and fast measurements without safety concerns around emitted radiation.
App084 en on-line-inspection-sealing-compound-covering-lid
The document describes using a laser-based optical displacement measurement system to inspect sealing compound thickness on covering lids during production. The system samples the compound surface of rotating lids to check thickness is within tolerances and sort out faulty lids. It offers accurate, fast, and reliable non-contact measurements with a small light spot diameter while being laser safety class 2.
Leaf Area Meter by ACMAS Technologies Pvt Ltd.
This document describes a leaf area meter made by Weiber's. It is a compact, tabletop instrument that can accurately measure the area of leaves as well as other flat materials like cloth, paper, plastics, and leather. The leaf area meter uses photometric technology and has a precision of +/- 2%. It stores up to 200 data groups and has an RS 232 C interface connection.
Sfct e brochure
Sureflo Clean Technologies provides customized solutions for filtration, separation, and aeration needs. It has over 25 years of experience in water treatment and manufactures equipment using advanced technologies. It offers a wide range of products and services including automatic filters, cyclonic separators, membrane filtration systems, cooling tower cleaning systems, and more. The company has design, manufacturing, and technical tie-up capabilities to meet various industrial and commercial water treatment requirements.
100.timex general product overview
TIMEX Filtration and Water Systems provides a comprehensive line of filtration products and systems for industrial, municipal, agricultural, and domestic applications. It offers automatic self-cleaning filters, basket strainers, hydrocyclone separators, bag filters, cartridge filters, and complete water treatment systems. TIMEX's filtration solutions are customized to meet stringent water quality standards and customers' specific requirements.
Datasheet DO4000 Series - Portable Digital Micro Ohmmeter
The D04000 series offers portable digital micro ohmmeters in three models. They feature easy-to-use keyboards, large LCD screens, automatic or manual ranging, and advanced measurement capabilities. The instruments measure resistance accurately from milliohms to kilohms using a 4-terminal technique that eliminates lead resistance errors. A variety of optional accessories are available.
Suction Unit Catalogue
The document provides information about Anand Medicaids Private Limited, an ISO 9001:2000 and ISO 13485:2003 certified company that manufactures a wide range of suction units. It describes the company's history and facilities, its focus on quality and customer service, and lists several suction unit models along with their specifications.
UV Systems catalog
We are a products, solutions and services wholesale supplier in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.A catalog including carefully selected products, from the most prestigious brands in the Water Treatment market, operative website, personalized services, precise and efficient logistics, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, make of Sinergroup Srl a reference for many companies of the market. A continuous and consistent effort, the ability to anticipate the evolution of the market demand and orientation to the understanding and satisfaction of our customers has always characterizes us in our work.
Born with the objective view in the exclusive distribution: Continue to be "Leader of the Brand Leader ", with activities and services of value. A choice of specialization that in recent years has allowed us to develop a unique knowledge and experience in the market. The thorough water treatment market understanding and high commercial performance, make us able to offer to our customers many products and services more personalized and appropriate to the individual end user. Our mission is to become your best business Partner!
Resins and filtering medias catalog
This document discusses various resins and filtering media used for water treatment. It provides information on cation exchange resins, zeolite and quartzite filtering media, Crystal Right resin for removing limescale, iron and manganese, and Turbidex filtering media. Product codes, descriptions, applications, features, and packaging specifications are listed for each.
Ultrasonic sensors from ifm 2016 English
Ultrasonic sensors from ifm can reliably detect objects from up to 2.2 meters away. They are robust, with stainless steel housing, and can operate independently of orientation. The vibrating transducer reduces dirt buildup. Settings can be configured via teach button or IO-Link. Ifm ultrasonic sensors are suitable for applications with soiling, transparent objects, or difficult surfaces.
Bondset underwater
Bondset Underwater is a 20-minute setting putty that can repair leaks in industrial and domestic pipelines. It can seal threaded pipe joints to prevent corrosion and increase lifespan, repair leaks in storage tanks, and fix pipeline leaks. The two-component putty has a 1:1 mixing ratio, can be applied to wet surfaces, and prevents rust while providing a smooth finish after application.
Spectrolyser titanium dw_en_multi parameter_scan
Spectrolyser titanium dw_en_multi parameter_scan - S::CAN - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Atexr
This document provides information on the AmerTex R-Series air filter media line. It describes the various synthetic and natural media types, their recommended applications, cleaning methods, and technical specifications. The R-Series media features an exclusive bonding technology, low airflow resistance, and high dust holding capacity. Media types include R15 Economy, R17 Durable, R29 Standard, R50 Super, and the natural R20 media. They are suitable for applications like air conditioners, ventilation systems, and paint spray booths. The media can be cleaned by washing or blowing with compressed air.
Cleanflex HF Flyer
The document discusses Helukabel's CLEANFLEX cable series, which is certified by Fraunhofer IPA to be suitable for use in cleanroom environments. CLEANFLEX cables have undergone extensive testing at Fraunhofer IPA's cleanroom test center, including particle emission and outgassing measurements, to ensure they maintain high cleanliness standards. The cables are designed for use in cable drag chains and come in power, data, and TP variants with specifications like temperature range and insulation resistance listed. Fraunhofer certification is an internationally recognized mark of a product's cleanroom compatibility.
Containers for cartridges
Aqua S.p.a. produces cartridge containers and filters for treating water to remove pollutants. Their product line includes:
1) Short line - Containers for small cartridges like the Micro Aqua, Mini Aqua, and Aqua Net designed for small spaces.
2) Standard line - Containers for medium capacity cartridges that are suitable for residential use, including the FP2 and FP3 models.
3) The document provides technical details on Aqua's various container models.
раки за год
Предлагается построить комплекс для массового производства посадочного материала тропических раков и креветок в целях реализации для дальнейшего выращивания товарной продукции заинтересованными сельхозпроизводителями
How Much Do You Know About Brine Shrimp?
Brine shrimp, also known as sea monkeys, are crustaceans that can stay dormant in cysts for years. They undergo a process called cryptobiosis, where they can survive in dormant cysts. When placed in salt water, the cysts hatch within hours. Brine shrimp are often used as a nutritious food source for fish.
Camille's Egg osmosis experiment 873
The document describes an experiment on egg osmosis. Students placed eggs in water, vinegar, and corn syrup and measured changes. Their hypothesis was that the egg in corn syrup would lose weight and shrink due to water moving out through osmosis, while the egg in water would remain the same. After 24 hours, observations showed the corn syrup egg lost weight and shrank as expected, while the water egg gained weight, supporting the concept of osmosis.
Brine shrimp
Brine shrimp, also known as sea monkeys, are small crustaceans found in saltwater lakes and salt flats around the world. They can enter a dormant state as eggs and survive for many years. In the 1960s, selling brine shrimp eggs as "sea monkeys" became a popular fad among children. However, advertisements made false claims about their ability to instantly hatch. Brine shrimp have a simple lifecycle - they hatch from eggs within a few days, mature within 2-3 weeks, and can live up to 6 months. Their population is affected by limiting factors like food, water, space and shelter.
Brine Shrimps 1.Key
- Brine shrimp are small aquatic crustaceans that live in salt lakes, usually in subtropical areas.
- They have a head, thorax, and abdomen like other crustaceans. Their 11 pairs of leafy legs are used for filtering, swimming, and respiration.
- Young brine shrimp are called nauplii and grow over 2-4 weeks until males and females can be distinguished by their different characteristics.
- A brine shrimp colony can be set up in a plastic bottle with salt water, sand, shells, and algae as food for the shrimp. Adding brine shrimp eggs will hatch larvae that grow into a population supported by the small self-contained ecosystem.
App108 en displacement-sensor-washing-machines
The inductive displacement sensor measures how much the outer drum of a washing machine drops when loaded to optimize operation and washing results. It also measures drum deflection during spin-drying to tailor the spin speed, improving machine performance and spin-drying effectiveness. The sensor provides an output signal proportional to the weight to allow full drum utilization and detergent amount determination. It has a 50mm measuring range and is simply mounted and controlled via the washing machine's microcontroller.
App075 en test-facility-shock-absorbers
The document describes a laser-based optical displacement sensor system used to inspect shock absorbers on a production line. The system uses two laser sensors and cameras to measure up to eight shock absorbers per minute for quality control. It can detect cracks, blow-outs, and other defects. If defects are found, labels are printed and added to quality statistics. The sensors allow non-contact measurement with high accuracy on different surfaces like black rubber or shiny metal within the required measurement range, resolution, and bandwidth for the application.
App060 en--roll-slit-gauging-sensor--trans
This document describes a measurement system used to digitally display the size of a roll slit on a coating machine. Two inductive precision gauging sensors are mounted on the roll frame and contact a measurement surface attached to the roll guide to measure small displacements indicating the slit size. The sensors and compact measuring amplifiers send data to display units showing the slit size at both ends of the rolls separately since the height can differ. The system was selected for its easy fitting and use, high accuracy and resolution, rugged design, and economical implementation.
App151 en liquid-level-measurement-during-capacitor-production
The document describes a measurement system using a confocal displacement sensor to measure liquid level during capacitor production. Key requirements were a measurement range of 24mm, accuracy of 50μm or better, and ability to measure a reflecting liquid surface in an explosion-hazard area. The optoNCDT 2400 confocal sensor was selected due to its non-contact measurement, high accuracy against reflecting surfaces, and easy mounting in a protective housing with sealing to isolate it from explosive vapors. The system ensures individual capacitor components meet quality criteria by maintaining an exactly defined dipping depth.
App089 en inspection-valve-cones
The document summarizes a laser-triangulation measurement system used to inspect valve cones during automated cylinder head assembly. The system uses 4 laser displacement sensors and an operating device to precisely measure the valves from over 100mm away with sub-0.002mm resolution. It was selected for its ability to measure in large spaces with high stability and accuracy for profile and edge detection.
App104 en coordinate-measuring-machine
Coordinate measuring machines from Zeiss use inductive displacement sensors from Micro-Epsilon to achieve high precision and reliability in measurements. The sensors measure probe bending at a resolution of a few tenths of a micrometer and provide correction values to compensate for disturbing influences like applied forces. They fulfill the demanding requirements of having no crosstalk during lateral movement, high dynamic range, high resolution, and small sensor design. This contributes significantly to the success of Zeiss's ScanMax mobile measurement machine.
App166 en high-precision-pipe-measurement
Two optoNCDT 1700 laser sensors are used to measure pipes during production to ensure dimensions are within specifications. The sensors are mounted on a rotating plate with an adjustable mirror to direct the laser beam and measure the inside and outside of pipes simultaneously. This provides a continuous thickness profile as the plate rotates. The sensors can measure a variety of materials with high accuracy under 250μm over a large measuring range and distance due to their RTSC function and synchronous data acquisition through an interface card.
More Related Content
What's hot
UV Systems catalog
We are a products, solutions and services wholesale supplier in water treatment. We provide only businesses companies such as distributors, retailers, manufacturers and assemblers.A catalog including carefully selected products, from the most prestigious brands in the Water Treatment market, operative website, personalized services, precise and efficient logistics, flexible organization, but also the basic importance that is attributed to human factors and relationships with partners, make of Sinergroup Srl a reference for many companies of the market. A continuous and consistent effort, the ability to anticipate the evolution of the market demand and orientation to the understanding and satisfaction of our customers has always characterizes us in our work.
Born with the objective view in the exclusive distribution: Continue to be "Leader of the Brand Leader ", with activities and services of value. A choice of specialization that in recent years has allowed us to develop a unique knowledge and experience in the market. The thorough water treatment market understanding and high commercial performance, make us able to offer to our customers many products and services more personalized and appropriate to the individual end user. Our mission is to become your best business Partner!
Resins and filtering medias catalog
This document discusses various resins and filtering media used for water treatment. It provides information on cation exchange resins, zeolite and quartzite filtering media, Crystal Right resin for removing limescale, iron and manganese, and Turbidex filtering media. Product codes, descriptions, applications, features, and packaging specifications are listed for each.
Ultrasonic sensors from ifm 2016 English
Ultrasonic sensors from ifm can reliably detect objects from up to 2.2 meters away. They are robust, with stainless steel housing, and can operate independently of orientation. The vibrating transducer reduces dirt buildup. Settings can be configured via teach button or IO-Link. Ifm ultrasonic sensors are suitable for applications with soiling, transparent objects, or difficult surfaces.
Bondset underwater
Bondset Underwater is a 20-minute setting putty that can repair leaks in industrial and domestic pipelines. It can seal threaded pipe joints to prevent corrosion and increase lifespan, repair leaks in storage tanks, and fix pipeline leaks. The two-component putty has a 1:1 mixing ratio, can be applied to wet surfaces, and prevents rust while providing a smooth finish after application.
Spectrolyser titanium dw_en_multi parameter_scan
Spectrolyser titanium dw_en_multi parameter_scan - S::CAN - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Atexr
This document provides information on the AmerTex R-Series air filter media line. It describes the various synthetic and natural media types, their recommended applications, cleaning methods, and technical specifications. The R-Series media features an exclusive bonding technology, low airflow resistance, and high dust holding capacity. Media types include R15 Economy, R17 Durable, R29 Standard, R50 Super, and the natural R20 media. They are suitable for applications like air conditioners, ventilation systems, and paint spray booths. The media can be cleaned by washing or blowing with compressed air.
Cleanflex HF Flyer
The document discusses Helukabel's CLEANFLEX cable series, which is certified by Fraunhofer IPA to be suitable for use in cleanroom environments. CLEANFLEX cables have undergone extensive testing at Fraunhofer IPA's cleanroom test center, including particle emission and outgassing measurements, to ensure they maintain high cleanliness standards. The cables are designed for use in cable drag chains and come in power, data, and TP variants with specifications like temperature range and insulation resistance listed. Fraunhofer certification is an internationally recognized mark of a product's cleanroom compatibility.
Containers for cartridges
Aqua S.p.a. produces cartridge containers and filters for treating water to remove pollutants. Their product line includes:
1) Short line - Containers for small cartridges like the Micro Aqua, Mini Aqua, and Aqua Net designed for small spaces.
2) Standard line - Containers for medium capacity cartridges that are suitable for residential use, including the FP2 and FP3 models.
3) The document provides technical details on Aqua's various container models.
What's hot (8)
Viewers also liked
раки за год
Предлагается построить комплекс для массового производства посадочного материала тропических раков и креветок в целях реализации для дальнейшего выращивания товарной продукции заинтересованными сельхозпроизводителями
How Much Do You Know About Brine Shrimp?
Brine shrimp, also known as sea monkeys, are crustaceans that can stay dormant in cysts for years. They undergo a process called cryptobiosis, where they can survive in dormant cysts. When placed in salt water, the cysts hatch within hours. Brine shrimp are often used as a nutritious food source for fish.
Camille's Egg osmosis experiment 873
The document describes an experiment on egg osmosis. Students placed eggs in water, vinegar, and corn syrup and measured changes. Their hypothesis was that the egg in corn syrup would lose weight and shrink due to water moving out through osmosis, while the egg in water would remain the same. After 24 hours, observations showed the corn syrup egg lost weight and shrank as expected, while the water egg gained weight, supporting the concept of osmosis.
Brine shrimp
Brine shrimp, also known as sea monkeys, are small crustaceans found in saltwater lakes and salt flats around the world. They can enter a dormant state as eggs and survive for many years. In the 1960s, selling brine shrimp eggs as "sea monkeys" became a popular fad among children. However, advertisements made false claims about their ability to instantly hatch. Brine shrimp have a simple lifecycle - they hatch from eggs within a few days, mature within 2-3 weeks, and can live up to 6 months. Their population is affected by limiting factors like food, water, space and shelter.
Brine Shrimps 1.Key
- Brine shrimp are small aquatic crustaceans that live in salt lakes, usually in subtropical areas.
- They have a head, thorax, and abdomen like other crustaceans. Their 11 pairs of leafy legs are used for filtering, swimming, and respiration.
- Young brine shrimp are called nauplii and grow over 2-4 weeks until males and females can be distinguished by their different characteristics.
- A brine shrimp colony can be set up in a plastic bottle with salt water, sand, shells, and algae as food for the shrimp. Adding brine shrimp eggs will hatch larvae that grow into a population supported by the small self-contained ecosystem.
Viewers also liked (7)
570.марикультура культивирование креветок учеб пособие
570.марикультура культивирование креветок учеб пособие
Similar to App144 en sorting-shrimps-fish-industry
App108 en displacement-sensor-washing-machines
The inductive displacement sensor measures how much the outer drum of a washing machine drops when loaded to optimize operation and washing results. It also measures drum deflection during spin-drying to tailor the spin speed, improving machine performance and spin-drying effectiveness. The sensor provides an output signal proportional to the weight to allow full drum utilization and detergent amount determination. It has a 50mm measuring range and is simply mounted and controlled via the washing machine's microcontroller.
App075 en test-facility-shock-absorbers
The document describes a laser-based optical displacement sensor system used to inspect shock absorbers on a production line. The system uses two laser sensors and cameras to measure up to eight shock absorbers per minute for quality control. It can detect cracks, blow-outs, and other defects. If defects are found, labels are printed and added to quality statistics. The sensors allow non-contact measurement with high accuracy on different surfaces like black rubber or shiny metal within the required measurement range, resolution, and bandwidth for the application.
App060 en--roll-slit-gauging-sensor--trans
This document describes a measurement system used to digitally display the size of a roll slit on a coating machine. Two inductive precision gauging sensors are mounted on the roll frame and contact a measurement surface attached to the roll guide to measure small displacements indicating the slit size. The sensors and compact measuring amplifiers send data to display units showing the slit size at both ends of the rolls separately since the height can differ. The system was selected for its easy fitting and use, high accuracy and resolution, rugged design, and economical implementation.
App151 en liquid-level-measurement-during-capacitor-production
The document describes a measurement system using a confocal displacement sensor to measure liquid level during capacitor production. Key requirements were a measurement range of 24mm, accuracy of 50μm or better, and ability to measure a reflecting liquid surface in an explosion-hazard area. The optoNCDT 2400 confocal sensor was selected due to its non-contact measurement, high accuracy against reflecting surfaces, and easy mounting in a protective housing with sealing to isolate it from explosive vapors. The system ensures individual capacitor components meet quality criteria by maintaining an exactly defined dipping depth.
App089 en inspection-valve-cones
The document summarizes a laser-triangulation measurement system used to inspect valve cones during automated cylinder head assembly. The system uses 4 laser displacement sensors and an operating device to precisely measure the valves from over 100mm away with sub-0.002mm resolution. It was selected for its ability to measure in large spaces with high stability and accuracy for profile and edge detection.
App104 en coordinate-measuring-machine
Coordinate measuring machines from Zeiss use inductive displacement sensors from Micro-Epsilon to achieve high precision and reliability in measurements. The sensors measure probe bending at a resolution of a few tenths of a micrometer and provide correction values to compensate for disturbing influences like applied forces. They fulfill the demanding requirements of having no crosstalk during lateral movement, high dynamic range, high resolution, and small sensor design. This contributes significantly to the success of Zeiss's ScanMax mobile measurement machine.
App166 en high-precision-pipe-measurement
Two optoNCDT 1700 laser sensors are used to measure pipes during production to ensure dimensions are within specifications. The sensors are mounted on a rotating plate with an adjustable mirror to direct the laser beam and measure the inside and outside of pipes simultaneously. This provides a continuous thickness profile as the plate rotates. The sensors can measure a variety of materials with high accuracy under 250μm over a large measuring range and distance due to their RTSC function and synchronous data acquisition through an interface card.
App044 en dimensional-testing-cans-food-industry
This document discusses using a laser-optical displacement sensor to measure the dimensions of cans and lids in the food industry. An automated measurement machine was developed using an optoNCDT sensor to ensure the accurate dimensions and matching of cans and lids. The sensor can measure the unfolding seam stitching height, nominal core height, and corrugation height of lids without being influenced by color variations. It provides repeatable measurements important for avoiding sealing failures in the canning process.
App116 en clutch-wear-racing-cars
The document discusses an inductive-potentiometric displacement sensor from MICRO-EPSILON that is used to monitor clutch wear in Audi racing cars during 24-hour endurance races like Le Mans. The non-contact sensor measures clutch stroke and wear without being subjected to high temperatures or vibrations. Key advantages of the sensor include a compact design with a large measurement range, no magnets, simple electronics controlled by a microcontroller, high dynamic response, and a wear-free and rugged construction. The sensor can be manufactured economically for both racing and mass production applications to replace sensors subject to wear.
App014 en--blade-tip clearance-turbines_compressors
This document discusses eddy current displacement sensors used to measure blade-tip clearance on turbines and compressors. The sensors are non-contacting and measure the distance from the blade tips to the housing under demanding conditions of high speed rotation and short dwell times. The sensors are well-suited for this application as they are small in size, operate in harsh ambient conditions up to 180°C, and have high temperature stability, fast response times down to 1.5 microseconds, and good signal conditioning. The system saves the minimum clearance measurement each revolution to monitor clearance and provide early warning of potential damage.
Washdown Select Series
When working in automated food and beverage manufacturing
segments like dairy, meat, filling and bottling, components that can survive in sanitary, hygienic and aseptic environments become necessary. Specifications for equipment look to reduce and remove areas for harboring bacteria. Poor survivability for Automation components during washdown can become a major cause of downtime and lost production during changeovers and cleaning processes.
Balluff offers a wide range of sensors and connectivity for washdown requirements - e.g. Ecolab, EHEGD, FDA, 3A, IP96K
App110 en compensation-thermal-extension
The document discusses using an eddy current displacement sensor to compensate for thermal expansion in a milling process. The sensor measures shifts in the spindle caused by temperature fluctuations and provides that information to the CNC control unit to actively compensate for axial extension. This improves machining accuracy compared to using just a temperature sensor. The eddy current sensor is chosen due to its miniature size, non-contact operation, temperature stability of ±0.1 μm/°C, high resolution of under 1 μm, and ability to change sensors.
CRPS_The_IPV_System
The In-Pipeline Vehicle (IPV) system is a remotely operated, hydraulic robotic device that can clean pipelines from 280mm to 1200mm in diameter. It uses cutting heads and vacuum extraction to remove deposits from pipes in a single pass, handling materials that were previously impossible to remove without replacing the entire pipeline. The IPV operates without workers entering the pipe, is monitored by CCTV, and transports all waste materials safely for disposal, providing an efficient alternative to conventional cleaning methods.
App115 en monitoring-clamping-tools
An inductive-potentiometric displacement sensor from the vipSENSOR Series directly measures the clamping stroke of a drawbar in a machine tool to continuously monitor tool clamping without needing to manually adjust switching points. The compact sensor integrates into the tool release unit and supplies an analog signal corresponding to drawbar movement. This provides more accurate tool seating detection than previous proximity sensors, avoiding faulty tool positioning that could damage expensive workpieces. Due to its high precision, the sensor helps satisfy increasing demands for machine tool accuracy and availability.
App038 en ram-travel-pill-press
Eddy current displacement sensors are used to measure the travel of the upper piston in a pill press. The non-contact sensors are not affected by process dust and can measure the force-travel characteristic to examine cohesion under pressure. Key benefits of the eddy current sensors include their small size, non-contact operation, lack of wear, reliable measurements, and optimal price performance for this application.
ATi-UK_UV254-Product.pdf
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
Food & Beverage industry-Magnetrol
Eclipse 705 GWR Level Transmitter's calibration and calibration verification are easily accomplished in a controlled workshop environment calibration test fixture. This feature allows the user to validate the initial, in-situ calibration, without the need to remove the probe from the vessel. This avoids the need for further time consuming and expensive in – situ process validation procedures, such as RO or WFI water metering and because the probe remains in the vessel there is no need for pressurising or depressurising of the vessel or further CIP/SIP cleaning regimes.
The test probe is mounted horizontally on a custom made test fixture fitted with a sliding target plate that can be moved along its entire length, to simulate desired test points. As all calibration information is stored in the electronics, either the electronics or the whole ”quick disconnect” transmitter housing can be quickly and easily removed, refitted to the test probe and powered up. The transmitter output can then be verified against the measured distance from the process connection to the target.
App107 en co-planarity-ic-pins
The document discusses using laser triangulation sensors to measure the co-planarity of integrated circuit pins during an automated assembly process. The sensor scans the row of pins with a laser beam and measures the distance of each pin to the placement plane with a resolution of 0.2 μm at a rate of 10 kHz. This high accuracy and speed allows automated assembly machines to significantly increase their performance and productivity for end users by ensuring proper component placement.
App118 en lift-height-measurement-fork-lift-trucks
Logistics companies are looking to optimize warehouse operations and shorten transfer times. Draw-wire displacement sensors installed on forklifts can help achieve this by precisely measuring load height, allowing optimal vehicle speed and safety. Still-Wagner uses a MICRO-EPSILON sensor that is compact, accurate, and redundant for safety. The sensor enables Still-Wagner to gain a competitive advantage through improved logistics efficiency and load positioning.
App103 en thickness-measurement-yarn
Eddy current displacement sensors are used to measure the thickness of yarn in textile manufacturing. Variations in yarn thickness directly impact quality, so sensors ensure uniform thickness by controlling stretching equipment. Sensors provide non-contact, high-resolution measurements even in dirty conditions. They improve productivity and quality at an excellent price/performance ratio. Key requirements for the sensor system include robust design, high speed operation at 5 kHz, and precise resolution of 0.005% for economic use measuring yarn thickness ranges from 2-6 mm.
Similar to App144 en sorting-shrimps-fish-industry (20)
App151 en liquid-level-measurement-during-capacitor-production
App151 en liquid-level-measurement-during-capacitor-production
App014 en--blade-tip clearance-turbines_compressors
App014 en--blade-tip clearance-turbines_compressors
App118 en lift-height-measurement-fork-lift-trucks
App118 en lift-height-measurement-fork-lift-trucks
More from ISATECK
Carta de presentacion 07 12- 12 -
ISATECK ofrece soluciones de automatización para plantas de prefabricados de concreto, incluyendo sistemas de control de mezcla, manejo de materiales y medición de humedad. Proporcionan suministros, instalación, integración, soporte técnico y servicios de consultoría utilizando tecnologías de socios líderes en instrumentación, control y comunicaciones. El objetivo es reducir costos de producción a través de la automatización para que las compañías sean más competitivas.
Aqua master 3
The document introduces the AquaMaster 3, a new generation of ABB's AquaMaster electromagnetic flow meter. It harnesses renewable energy sources and includes improved durability to provide reliable water measurement with reduced costs and environmental impact. Key features include using solar or wind power, long-lasting batteries, and communication capabilities to remotely monitor water networks efficiently.
App167 en contact-lens-measurement
The document discusses using a laser micrometer to measure dimensional changes in clear polymer contact lens samples while they are submerged in saline solution during testing. The laser micrometer can distinguish between the glass enclosure, saline solution, and polymer samples using multi-segment mode and a programmable threshold. It offers accuracy of 1 micron, resolution of 0.2 microns or better, and a measurement speed of 2300 per second, making it suitable for measuring the challenging target of transparent materials submerged in liquid.
App165 en position-measurement-x-ray-machines
The document discusses the use of draw-wire displacement sensors in modern X-ray machines. Five sensors are used to precisely position the camera, X-ray tubes, X-ray table, and wall stands on multiple axes, allowing for flexibility and ensuring optimal focusing of the X-ray image. The sensors provide positioning information to the synchronization controller, allowing the camera and X-ray tubes to move in parallel for high-quality digital images. This precise sensor positioning reduces patient radiation exposure and enables more accurate diagnoses.
App164 en monitoring-thermal-expansion-pipelines-power-stations
Pipelines in power stations experience extreme temperatures and pressures, causing thermal movements up to 1 meter. Constant supports are needed to compensate for this, but were previously checked manually in a time-consuming process. Now, draw-wire sensors from Micro-Epsilon reliably transmit movement data to a central control room for flexible and accurate monitoring. The WDS-500-P60 and WDS-1000-P60 draw-wire sensors can measure ranges from 500mm to 1000mm, operate in air up to 60°C, and last over 5 million cycles. This new system eliminates the risk of missing exceeded tolerances.
App163 en displacement-measurement-slag-transporter
The document discusses using draw-wire displacement sensors to measure the position of cylinders on a slag transporter. The sensors enable continuous measurement of the cylinders to reduce transportation time for hot slag. Previously, discrete limit switches were used but were prone to errors. The draw-wire sensors provide reliable measurement in harsh ambient conditions down to -40°C. Sensors from the WDS-500-P60 and WDS-3000-P115 series meet the requirements for measuring ranges from 500mm to 3,000mm and linearity of 0.1% for use on the slag transporter cylinders.
App162 en -cable-banding
The document discusses how laser displacement sensors from Micro-Epsilon are used to measure the diameter of drums in a banding machine that wraps cable sheathing materials like Kapton or Teflon around wires. The laser sensor measures the drum diameter continuously and sends the data to a processor to calculate the required torque for the bobbin drive. The optoNCDT 1401 laser sensor is well-suited for this application as it can handle the measurement of various shiny and transparent materials on the drum from up to 200mm away despite reflections and obstructions in its field of view.
App159 en filling-quantity-measurement-biogas-tanks
The document discusses using a draw-wire displacement sensor to continuously measure the filling quantity in biogas tanks. As the gas in the tank increases pressure, it inflates the flexible film of the gas tank. A weight attached to the film keeps the sensor wire tensioned so the sensor can measure the changing distance as the film expands and contracts based on gas quantity. This continuous measurement allows for more efficient control of biogas generation compared to discrete level switch measurements, improving the efficiency of biogas production and combustion.
App149 en test-rig-pneumatic-actuator
The document summarizes a test rig developed by Micro-Epsilon in cooperation with Festo to test pneumatic actuators called "muscles". The test rig uses a laser-based sensor to measure the displacement of the muscle when compressed air is applied. A force transducer and pressure transducer also collect data. The signals are analyzed in ICONNECT software to determine velocity and acceleration. The measured and calculated values are displayed as curves along with statistical values for minimum, maximum, and mean. The display can be printed or exported, and raw data can be exported to Excel for further analysis.
App156 en variable-support-mobile-cranes-cherry-picker-platforms
The document discusses using draw-wire displacement sensors to measure the width of variable supports on mobile cranes and cherry pickers. Measuring the support width allows the onboard computer to calculate the maximum permissible load moment based on the available space. Draw-wire sensors ranging from 1500-4000mm are suitable, with two sensors often used per support for redundancy. The telescopic sensors are easy to install, including as a retrofit, and help ensure optimal and safe use of the cranes even in confined spaces.
App155 en lift-height-measurement-wheel-gripper-lifting-systems
Mobile lifting systems for commercial and rail vehicles are becoming more popular and can be assembled from individual lifting trestles. Each trestle must have its own drive and lift height is measured with a draw-wire sensor to allow for synchronized lifting. Draw-wire sensors are well-suited for lift height measurement due to their size, price/performance ratio, and available models that meet requirements like measurement ranges under 2.5m and resolutions under 0.5mm.
App143 en height-lifting-platforms-automobile-production-lines
Draw-wire displacement sensors are used on automobile production lines to measure the position of lifting platforms that vehicles rest on during the assembly process. The sensors continuously measure the exact position of each platform to automatically adjust them to the optimum working height for each production step, improving time efficiency and ergonomics. The sensors interface with a central controller via radio or wired connections and have measurement ranges up to 1500mm, accuracy of 0.3mm, and resolution of 0.1mm to meet the requirements for monitoring the lifting platforms. They provide a good price to performance ratio, minimal space needs, and simple mounting.
App154 en test-rig-steel-wheel-profile-measurement
The document describes a test rig setup used to measure the wheel profiles of trains. It uses laser-based optical sensors, including two scanCONTROL 2800 profile sensors housed in troughs embedded in the track bed, to capture wheel profile data and diameter measurements as trains pass over. This data is analyzed to determine reprofiling needs and helps reduce costs by streamlining maintenance scheduling.
App152 en measurement-railroad-rails-laser-profile-sensors
The document discusses using laser profile sensors to measure railroad rails to assess wear and prevent costly incidents from derailment. It describes mounting two synchronized scanCONTROL 2800 sensors under inspection cars traveling up to 100 km/h to quickly and accurately measure full rail profiles. The scanCONTROL 2800 sensors are the fastest and most precise available, meeting the demanding speed and accuracy needs for rail inspection.
App150 en window-jam-protection
The document describes a capacitive sensor system for detecting window and door jamming during automatic closing. The system uses two wires embedded in door profiles as electrodes to monitor changes in capacitance when an object enters the electric field between the wires. A multi-frequency technique allows the system to differentiate between body parts and water. The sensor can be integrated into existing profiles and provides both capacitive non-contact detection as well as tactile contact detection for redundancy. The evaluation circuit is miniaturized in an ASIC for a cost-effective solution.
App148 en low-cost-sensors-cylinder-applications
This document describes inductive displacement and position sensors that can be used inside hydraulic cylinders and gas pressure springs to monitor and control movement. The sensors use eddy current technology with an aluminum target to provide linear displacement measurement over a range of 20-200mm with high accuracy even in temperatures from -40 to 150°C. They can be customized for integration directly into cylinders and springs used in applications like vehicle tailgates and washing machines to provide compact, low-cost sensing solutions.
App145 en inspection-adhesive-beading-termination-strip
The document describes using a scanCONTROL 2810 laser profile sensor to inspect the application of adhesive beading on termination strips in vehicle manufacturing. The sensor measures the height, width, and position of the adhesive relative to the strip to ensure dimensional requirements are met. It analyzes the profile directly in the controller and provides output if tolerances are exceeded. The complete independent system allows for high-speed inspection of the critical stripping process.
App147 en in-line-inspection-wiper-blade-rubbers
The document describes an in-line inspection system for measuring wiper blade rubbers using a laser line scanner and cameras. The system uses two laser scanners on the top and bottom of the material to measure the thickness and cross-sectional shape. Cameras on both sides inspect for defects like dimples or bubbles based on surface deviations, contrast, and intensity variance. The system provides thickness measurements, marks defect locations, and outputs warnings if measurement limits are exceeded to control production quality.
App146 en weld-seamtracking-pipeline-inspection
The document discusses a laser profile sensor system for inspecting welded seams on pipelines. The system automatically positions inspection equipment above the seam and tracks it to check for deviations from the ideal central position under varying ambient conditions. It provides analog and digital output without needing a PC. The scanCONTROL 2810 laser sensor meets requirements for inspecting welded seams, including measurement range, accuracy, resolution, and operating in dirty, wet environments from 0-50 degrees Celsius.
App142 en stress-tests-aircraft-wings
Wings on aircraft are tested under various stress conditions to optimize their shape and construction. 120 draw-wire displacement sensors are used to measure the vertical displacement of wings up to 1200 mm at different points during structural tests. The 120 synchronized sensors provide detailed data on vibration and deflection behavior to support continuous optimization of parameters like service life, safety, and fuel consumption. The draw-wire sensors were selected for their good price-performance ratio, ease of installation, and high accuracy.
More from ISATECK (20)
App164 en monitoring-thermal-expansion-pipelines-power-stations
App164 en monitoring-thermal-expansion-pipelines-power-stations
App163 en displacement-measurement-slag-transporter
App163 en displacement-measurement-slag-transporter
App159 en filling-quantity-measurement-biogas-tanks
App159 en filling-quantity-measurement-biogas-tanks
App156 en variable-support-mobile-cranes-cherry-picker-platforms
App156 en variable-support-mobile-cranes-cherry-picker-platforms
App155 en lift-height-measurement-wheel-gripper-lifting-systems
App155 en lift-height-measurement-wheel-gripper-lifting-systems
App143 en height-lifting-platforms-automobile-production-lines
App143 en height-lifting-platforms-automobile-production-lines
App154 en test-rig-steel-wheel-profile-measurement
App154 en test-rig-steel-wheel-profile-measurement
App152 en measurement-railroad-rails-laser-profile-sensors
App152 en measurement-railroad-rails-laser-profile-sensors
App145 en inspection-adhesive-beading-termination-strip
App145 en inspection-adhesive-beading-termination-strip
App144 en sorting-shrimps-fish-industry
- 1. A144_e Inductive displacement and position sensors induSENSOR series LVP Sorting shrimps in the fish industry A previously manually adjustable sorting machine for Measurement objective: shrimps has been retrofitted with a displacement Simple control of the roll gap using the sensor. In this way the process reliability of the displacement sensor and connected display machine was able to be increased significantly. (in mm). In the machine shrimps are passed by a conveyor belt into a container. The container shakes the A special version of the Series LVP is used with a shrimps through two rolls. The separation of the rolls stainless steel housing and cable output instead of determines the size of the shrimps falling through. the aluminum housing and the plug connector. This The adjustment of the rolls is measured by an special design can also withstand the aggressive inductive displacement sensor of the series LVP The . cleaning agents used in the foodstuffs industry. output is provided by a digital display which indicates the roll gap in mm. Sensor selection: The roll separation is approx. 20 mm initially and Stainless steel housing suitable for the foodstuffs enlarges to 40 mm, i.e. the sorting is carried out from industry small through to large. Resists aggressive cleaning agents High level of protection Sensor type: LVP-50-GA-2-CA-I MICRO-EPSILON A member of micro-epsilon group. Koenigbacher Str. 15 Tel.: +49 (0) 85 42/1 68-0 info@micro-epsilon.com Certified DIN EN ISO 9001 : 2000 94496 Ortenburg / Germany Fax: +49 (0) 85 42/1 68 90 www.micro-epsilon.com Modifications reserved 9781144