This document provides information about AMO GmbH's absolute encoder products based on inductive measuring principles. It introduces the ABSYS product line of absolute linear and angular encoders with IP67 ratings. The encoders use gratings for incremental and absolute position measurement. Available interfaces include SSI, BiSS/C, and Fanuc protocols. Linear scales can measure up to 32 meters and angular scales use measuring flanges or rings from 80mm to 652mm in diameter. The document provides details on standard and custom measuring flanges and rings for outside scanning of absolute angle measuring systems.
Electronica Mechatronic Systems provides Ultima and 2D measurement, We are a leading manufacturers and suppliers in all over the world. Height gauges is a device that helps measure heights of the objects, and to mark the items that need to be worked on. These machines or devices are used in metrology or metalworking. These are used to set or determine vertical distances.
DCT welding and jig tables are made for extreme duty metal fabrication. Built to last a lifetime and beyond, these tables are constructed with an extremely rigid and flat, five-sided top surface.
Learn more at www.enjoy-sound.com
The Fowler-Bowers XT Analog Bore Gages offer an
economic solution to accurate shop floor bore measurement. Fast, accurate and easy-to-use, the wide
application range of the XT Analog Bore Gage line may be
purchased individually or in sets.
Over the years, Campro has dedicated itself to provide
machining centers that fully meet customer's requirements
for productivity and accuracy. The concept is to design and
manufacture VMCs that not only feature maximum stability
and productivity, but also to achieve environmental
protection compliance and human factors engineering
theorem. The CPV series is designed and manufactured
based on that concept.
Electronica Mechatronic Systems provides Ultima and 2D measurement, We are a leading manufacturers and suppliers in all over the world. Height gauges is a device that helps measure heights of the objects, and to mark the items that need to be worked on. These machines or devices are used in metrology or metalworking. These are used to set or determine vertical distances.
DCT welding and jig tables are made for extreme duty metal fabrication. Built to last a lifetime and beyond, these tables are constructed with an extremely rigid and flat, five-sided top surface.
Learn more at www.enjoy-sound.com
The Fowler-Bowers XT Analog Bore Gages offer an
economic solution to accurate shop floor bore measurement. Fast, accurate and easy-to-use, the wide
application range of the XT Analog Bore Gage line may be
purchased individually or in sets.
Over the years, Campro has dedicated itself to provide
machining centers that fully meet customer's requirements
for productivity and accuracy. The concept is to design and
manufacture VMCs that not only feature maximum stability
and productivity, but also to achieve environmental
protection compliance and human factors engineering
theorem. The CPV series is designed and manufactured
based on that concept.
Chijie Mold Industrial Co., Ltd. was established in 1998 and is located in Xiamen, Fujian. We specialize in the design, development and manufacture of high precision moulds such as plastic injection moulds, aluminium die-castings as well as moulds for zinc alloy, rubber, blowing, carbon fiber and bakelite.
Our factory covers over 15,000 square metres and is equipped with the latest high-tech machines including inspection and testing equipments from trusted brands such as Agie, Sodick, Makino, Takumi and more.
Chijie employs over 100 highly trained staffs with rich experience in technical research, development and design.
With our state of the art facilities and professionally trained staff, we are able to provide a range of automotive, electronic, electrical, telecommunication and medical moulds for industrial and commercial use.
Producing over 600 mould sets per year, we have a strong work capacity that we produce moulds for international clients in USA, Germany, Japan, Russia, Denmark, Sweden and Singapore to name just a few.
As the first mold company in Fujian to gain ISO 9001:2008 accreditation, we are also members of the China Die & Mould Association (CDMA). As well as serving as Vice Chairman for Xiamen Mould Association.
Our proud history, advanced facilities and professional staff make Chijie a proven provider in high quality OEM and ODM products and services.
Con todas las virtudes de las punzonadoras Bsochert a CNC, esta versión es ideal para las empresas que recién se incorporan a la manufactura de piezas punzonadas o bien para empresas con producciones limitadas y de bajo volumen.
Led driver manufacturer from Ottma catalog 2017Abby Tang
High-tech enterprise specializing in the R&D, manufacture and export of LED driver and LED power supply. Our products series includes LED drivers for LED spotlight bulbs, bulbs, down lights, panel lights, tubes, streetlights and industrial lights.
We have 10 R&D staff with 9 years of experience in LED driver. Our 7 QC members implement the IQC under the standards of IPC and carefully select components with excellent performance. Our products are CE, CB,KC,UL,SAA, EMC approved. In addition, our QC can offer 3-year warranty and maintain our repair rate below 0.3%.
Cembre Cable Cutters & Cutting Tools - UK Distributor
Manual, Ratchet, Hydraulic, Battery Cable Cutting Tools
Cembre cable cutters are ideal for cutting low and high voltage power, control and instrumentation cablesincluding steel wire armoured (SWA) cables.
Cembre hydraulic cable cutters also include ranges for overhead line conductor cutting applications - ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines.
Cable cutters suit up to 4 core 400sqmm XLPE/SWA BS5467 cables, lead covered sheathed cables and all high voltage power cables including Triplex.
Cembre Hydraulic Cable Cutters
Cembre Hydraulic Cable Cutters and Cable Cutting Tools - Features :
Hand operated Cembre hydraulic cutter tools designed to cut copper, aluminium and telecommunications cables, up to 85mm diameters
Double speed Cembre cable cutting action : a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cable cutting
Cembre cable cutting blades are made from high strength special steel, heat trated to ensure a long service life
Cembre hydraulic cable cutting tool heads can be easily opened to allow the cutting of running cables
Cembe hydraulic cable cutting tools can be rotated through 90, 180 and 320 degrees to allow the cable jointer or electrical engineer to cut cables in the most accessible position
OMNI China cnc router catalogue in 2015. www.omni-cnc.com, www.omnicnc.com
Product: http://www.omni-cnc.com/products/CNC_Router/
Video: https://www.youtube.com/playlist?list=PLtschXp6g8g-NuVL08q3948kTC6xY-MqU
OMNI CNC routers are ideally suited for residential and commercial woodworking,fabricating plastics and composites,shaping and inlaying solid furface,machining non-ferrous metals and more.
Email: sales@omni-cnc.com
Skype: omni-cnc
Chijie Mold Industrial Co., Ltd. was established in 1998 and is located in Xiamen, Fujian. We specialize in the design, development and manufacture of high precision moulds such as plastic injection moulds, aluminium die-castings as well as moulds for zinc alloy, rubber, blowing, carbon fiber and bakelite.
Our factory covers over 15,000 square metres and is equipped with the latest high-tech machines including inspection and testing equipments from trusted brands such as Agie, Sodick, Makino, Takumi and more.
Chijie employs over 100 highly trained staffs with rich experience in technical research, development and design.
With our state of the art facilities and professionally trained staff, we are able to provide a range of automotive, electronic, electrical, telecommunication and medical moulds for industrial and commercial use.
Producing over 600 mould sets per year, we have a strong work capacity that we produce moulds for international clients in USA, Germany, Japan, Russia, Denmark, Sweden and Singapore to name just a few.
As the first mold company in Fujian to gain ISO 9001:2008 accreditation, we are also members of the China Die & Mould Association (CDMA). As well as serving as Vice Chairman for Xiamen Mould Association.
Our proud history, advanced facilities and professional staff make Chijie a proven provider in high quality OEM and ODM products and services.
Con todas las virtudes de las punzonadoras Bsochert a CNC, esta versión es ideal para las empresas que recién se incorporan a la manufactura de piezas punzonadas o bien para empresas con producciones limitadas y de bajo volumen.
Led driver manufacturer from Ottma catalog 2017Abby Tang
High-tech enterprise specializing in the R&D, manufacture and export of LED driver and LED power supply. Our products series includes LED drivers for LED spotlight bulbs, bulbs, down lights, panel lights, tubes, streetlights and industrial lights.
We have 10 R&D staff with 9 years of experience in LED driver. Our 7 QC members implement the IQC under the standards of IPC and carefully select components with excellent performance. Our products are CE, CB,KC,UL,SAA, EMC approved. In addition, our QC can offer 3-year warranty and maintain our repair rate below 0.3%.
Cembre Cable Cutters & Cutting Tools - UK Distributor
Manual, Ratchet, Hydraulic, Battery Cable Cutting Tools
Cembre cable cutters are ideal for cutting low and high voltage power, control and instrumentation cablesincluding steel wire armoured (SWA) cables.
Cembre hydraulic cable cutters also include ranges for overhead line conductor cutting applications - ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines.
Cable cutters suit up to 4 core 400sqmm XLPE/SWA BS5467 cables, lead covered sheathed cables and all high voltage power cables including Triplex.
Cembre Hydraulic Cable Cutters
Cembre Hydraulic Cable Cutters and Cable Cutting Tools - Features :
Hand operated Cembre hydraulic cutter tools designed to cut copper, aluminium and telecommunications cables, up to 85mm diameters
Double speed Cembre cable cutting action : a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cable cutting
Cembre cable cutting blades are made from high strength special steel, heat trated to ensure a long service life
Cembre hydraulic cable cutting tool heads can be easily opened to allow the cutting of running cables
Cembe hydraulic cable cutting tools can be rotated through 90, 180 and 320 degrees to allow the cable jointer or electrical engineer to cut cables in the most accessible position
OMNI China cnc router catalogue in 2015. www.omni-cnc.com, www.omnicnc.com
Product: http://www.omni-cnc.com/products/CNC_Router/
Video: https://www.youtube.com/playlist?list=PLtschXp6g8g-NuVL08q3948kTC6xY-MqU
OMNI CNC routers are ideally suited for residential and commercial woodworking,fabricating plastics and composites,shaping and inlaying solid furface,machining non-ferrous metals and more.
Email: sales@omni-cnc.com
Skype: omni-cnc
Siguiendo la linea de medicion de alta precision, Jenoptik desarrolla la tecnologia para medir diametros exteriores con alta precision, facil manejo y un almacenamiento de datos estadisticos para la mejor toma de decisiones.
HIOKI 9272-10 Clamp on Sensor has 1Hz to 100kHz (Phase: 5Hz to 50kHz) rated 20A/200A AC/DC. f 46 mm (1.81 in) core dia is available for Sales, Rentals , hire, Lease @ http://www.supremetechnology.com.au/product/hioki-9272-10-clamp-on-sensor.aspx?Id=2091&ProductType=Regular #testequipments #sales #rentals #hire #lease #hioki #dataacquisition #memoryrecorders #supremetechnologyandenergysolutions
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
FIDO Alliance Osaka Seminar: Passkeys at Amazon.pdf
Amo absolute encoder_catalog
1. AMO GmbH
Absolute encoder based on the AMOSIN® –
Inductive Measuring Principle
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
2. This document was created very carefully. If there are any
technical changes, they will promptly updated in the docu-ments
2
on our website www.amo-gmbh.com
With the publication of this brochure all previous editions
become invalid.
The currently valid brochure is available on our website
www.amo-gmbh.com
SN: ABSOLUTE-P 20140331
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
3. 3
Table of contents
General informations
General information............................................................................................... 4
Absolute angle measuring systems
Standard measuring flanges for outside scanning................................................. 6
Customer specific measuring flanges for outside scanning................................... 8
Measuring rings for outside scanning.................................................................... 10
Measuring rings for inside scanning...................................................................... 12
Scanning head for absolute angle measuring systems......................................... 14
Non guided Absolute length measuring systems
Scales for non-guided measuring systems, mounted with adhesive tape............. 18
Scales for non-guided measuring systems with steel carrier................................. 19
Scanning heads for non-guided measuring systems............................................. 22
Guided Absolute length measuring systems
Measuring rail for guided systems......................................................................... 24
Scanning head for guided systems........................................................................ 27
General technical data
Maximum speeds................................................................................................... 31
Cable..................................................................................................................... 32
Plug and connection assignments......................................................................... 33
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
4. Absolute Messsysteme
Absolute measuring systems
4
Allgemeine Informationen
General informations
General
AMO announces new absolute linear and angular encoders with
IP 67 rating.
We have recently introduced ABSYS, a broad range of absolute
measuring system products covered by several AMO patents,
based on our proven and successful AMOSIN® pure inductive
measuring principle.
Our linear and rotary scales are produced incorporating two highly
accurate grating tracks - one incremental and the other a coded
absolute pattern, using a precision etched photo-lithographic
process. The encoder head incorporates a micro coil array sensor
along with analog and digital evaluation electronics.
For both the linear and rotary systems, the absolute position value
is acquired in real time. Several types of serial interfaces are
available, including SSI, BiSS/C, and CNC control protocols. As
an option, the system electronics can also deliver 1 Vpp SINE /
COSINE signals at 40μm pitch.
The basic pitch period of the incremental graduation is 1000μm.
The new ABSYS absolute encoders include all of the unique
inductive encoder features that our incremental encoders have for
harsh environments, such as very wide operating temperature en-velope,
ability to operate in high shock, vibration, and electroma-gnetic
environments, but yet offer high accuracy, high resolution,
Absolut Angle Measuring System
Abtastkopf
Measuring head
Inkrementale Teilung
Incremental grating
Absolut codierte Teilung
Absolut coded grating
Messflansch
Measuring flange
and high speed. Additional data for our encoders can be found in
the AMOSIN® brochures (see www.amo-gmbh.com).
Linear measuring lengths up to 32 meters, and standard ring scale size from 80 mm up to 652 mm diameter are available. Measuring rings with
other diameters up to 10m on request.
Absolut Linear Measuring System
Abtastkopf
Measuring head
Inkrementale Teilung
Incremental grating
Absolut codierte Teilung
Absolut coded grating
Absolutmaßstab
Absolut scale
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
5. 5
Absolute angle measuring systems
■■ Outside or Inside Scanning
■■ Resolution up to 25 bit
■■ Available interfaces:
SSI, BiSS/C, Fanuc
■■ Diameters up to 10 m
■■ Protection class IP 67
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
6. Absolute Winkelmesssysteme
Absolute angle measuring systems
Technical data
Ordering code: WMFA-1010
6
Messflansche und Messringe - Außenabtastung
Measuring flanges and rings - outside scanning
Standard measuring flanges and rings for outside scanning
Measuring flanges WMFA-1010 with 1000μm grating pitch offered as
standard sizes as shown in the table below.
Customer specific designs for the measuring flange can be supplied
by AMO or the measuring flange will be supplied by the customer for
mounting the measuring ring at AMO (see page 8 for details).
The measurement scale of the absolute angle measuring systems with
external scan can be realized in the following models:
■■ standard measuring flange
■■ customer specific flange
■■ measuring rings
WMFA-1010. - -
Grating pitches / revolution (N)
Inner diameter ØI (see drawing)
0 .......... small
1 .......... large
Linearity error
0 ... ± 10 μm arc length
1 ... ± 5 μm arc length
2 ... ± 3 μm arc length
WMFA-1010
Standard sizes N
0256 0360 0512 0720 0900 1024
Grating pitch [arc length]: 1000 μm
Grating accuracy [arc length]: ± 10 μm, ± 5 μm oder (or) ± 3 μm
Mechanical execution: Stainless steel measuring flange in 2 versions:
massive: WMFA-1010.x-xxxx-0
thin: WMFA-1010.x-xxxx-1
Outer diameter ØA [mm]: 81,95 115,12 163,54 229,78 287,08 326,55
Incremetal grating pitches / rev: 256 360 512 720 900 1024
Absolute resolution / rev [increments] 1μm: 218 360 x 210 219 720 x 210 900 x 210 220
Absolute resolution / rev [increments] 0,25μm: 220 360 x 212 221 720 x 212 900 x 212 222
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
7. 7
Messflansche und Messringe - Außenabtastung
Measuring flanges and rings - outside scanning
Absolute Winkelmesssysteme
Absolute angle measuring systems
Dimensions standard measuring flanges
Type
WMFA-1010
Ø A
[mm]
Ø I
[mm]
Ø B
[mm] β
Scale accuracy
WMFA-1010.0 WMFA-1010.1 WMFA-1010.2
0256-1 81,95 60 +0
-0,01 70 6 x 60° ±50” ±25” ±15“
0360-0 115,12 60 +0
-0,01 75
6 x 60° ±36” ±18” ±10“
0360-1 115,12 95 +0
-0,01 105
0512-0 163,54 105 +0
-0,01 120
6 x 60° ±24” ±12” ±7,5“
0512-1 1) 163,54 143 +0
-0,01 153
0720-0 229,78 180 +0
-0,01 195
6 x 60° ±18” ±9” ±5,4“
0720-1 1) 229,78 209 +0
-0,01 219
0900-0 287,08 180 +0
-0,01 195
12 x 30° ±14” ±7” ±4,3“
0900-1 1) 287,08 266 +0
-0,01 276
1024-0 326,55 220 +0
-0,01 235
12 x 30° ±12” ±6” ±3,8“
1024-1 1) 326,55 296 +0
-0,01 311
1) Only for press-fitt assembly on the customers shaft (recommended shaft tolerance +0,02 / +0,01)
Dimensions WMFA-1010
ß
M6
0,1
X ØB
0,005 15 ±0,05
5,2
0,1
0,5x45°
0,5x45°
6,5 6,5
+0,5
2 0
DETAIL X
M 2:1
ØA 0,005 A
0,005
A
0
-0,01
ØI
+0,1
0
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
8. Absolute Winkelmesssysteme
Absolute angle measuring systems
Customer specific measuring flanges for outside scanning
Technical data
8
Messflansche und Messringe - Außenabtastung
Measuring flanges and rings - outside scanning
Customer specific designs for the measuring flange can be supplied by
AMO (Type WMFA) or the measuring flange will be supplied by the cus-tomer
for mounting the measuring ring at AMO (Type WMBA). In this
case the diameter for mounting the measuring ring can be calculated
as shown in the table on the next page.
Special sizes with any number of pitches per revolution on request
The production drawing for the carrier flange can be released by
AMO.
For applications with large diameters or significant variations in tem-perature
during operation the system must be designed accordingly.
WMFA-1010 / WMBA-1010
Standard sizes N
0256 0360 0512 0720 0900 1024
Grating pitch [arc length]: 1000 μm
Grating accuracy [arc length]: ± 10 μm, ± 5 μm oder (or) ± 3 μm
Mechanical execution: Customer specific, recommended material 1.4104 (Aisi 430F) or 1.7225 (Aisi 4140)
Outer diameter ØA [mm]: 81,95 115,12 163,54 229,78 287,08 326,55
Incremetal grating pitches / rev: 256 360 512 720 900 1024
Absolute resolution / rev [increments] 1μm: 218 360 x 210 219 720 x 210 900 x 210 220
Absolute resolution / rev [increments] 0,25μm: 220 360 x 212 221 720 x 212 900 x 212 222
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
9. 9
Messflansche und Messringe - Außenabtastung
Measuring flanges and rings - outside scanning
Absolute Winkelmesssysteme
Absolute angle measuring systems
Mechanical design for WMFA-1010 / WMBA-1010
WMFA-1010 / WMBA-1010
0,5-1
>15
15°
0,8
0,5
Gratfrei
Burr free
ØS = ØF + 0,65±0,05
ØS Länge>7mm
Freiraum für Abtastkopf
keep free for>7mm
Measuring head width
0,005*
0,005* A
0,01 A
A
l
ØF
3,2
Recommended material: 1.4104 (Aisi 430F) or 1.7225 (Aisi 4140)
Please contact AMO if using other soft magnetic material.
Grating pitch [arc length]: 1000 μm
N ØF [mm]
256 81,25 ±0,01
360 114,42 ±0,01
512 162,84 ±0,02
720 229,08 ±0,02
900 286,38 ±0,02
1024 325,85 ±0,02
N: Integer number of grating pitches per revolution
*) Recommended eccentricity: Greater eccentricities up to ~0,05mm do not affect the function of the device, but cause a proportional loss in positioning accuracy.
Ordering code: customer specific designs for WMFA-1010 / WMBA-1010
Customer specific design
xx ......... number defined by AMO
WMFA-1010. - -S
WMBA-1010. - -S
Grating pitches / revolution (N)
Linearity error
0 ... ± 10 μm arc length
1 ... ± 5 μm arc length
2 ... ± 3 μm arc length
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
10. Absolute Winkelmesssysteme
Absolute angle measuring systems
10
Messflansche und Messringe - Außenabtastung
Measuring flanges and rings - outside scanning
Measuring rings for outside scanning
Thin, stainless steel measuring ring, consisting of a steel carrier ring,
a graduation ring and a protection ring. Easily pressfitted mounting to
the corresponding flange by the customer. (see mounting instruction at
www.amo-gmbh.com)
For special applications the measuring ring (circular segment also pos-sible)
can be mounted on a flange at the factory.
Außendurchmesser
Outer diameter
A
Innendurchmesser
Inner diameter
WMRA-1010
14
0,65
F
Special sizes with any number of pitches per revolution on request
WMRA-1010
Standard sizes N
0256 0360 0512 0720 0900 1024 1440 1800 2048
Grating pitch [arc length]: 1000 μm
Grating accuracy [arc length]: ± 10 μm, ± 5 μm oder (or) ± 3 μm
Mechanical execution: Stainless steel measuring ring
Flange material: No special material required
Outer diameter ØA [mm]: 81,95 115,12 163,54 229,78 287,08 326,55 458,99 573,61 652,58
Incremetal grating pitches / rev: 256 360 512 720 900 1024 1440 1800 2048
Absolute resolution / rev [increments] 1μm: 218 360 x
210 219 720 x
210
900 x
210 220 1440 x
210
1800 x
210 221
Absolute resolution / rev [increments] 0,25μm: 220 360 x
212 221 720 x
212
900 x
212 222 1440 x
212
1800 x
212 223
Technical data
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
11. Sold & Serviced By:
11
Messflansche und Messringe - Außenabtastung
Measuring flanges and rings - outside scanning
Absolute Winkelmesssysteme
Absolute angle measuring systems
Mechanical design for WMRA-1010
WMRA-1010
0,5-1
>15
15°
0,8
0,5
Gratfrei
Burr free
ØS = ØF + 1,15±0,05
ØS Länge>7mm
Freiraum für Abtastkopf
keep free for>7mm
Measuring head width
0,005*
0,005* A
0,01 A
A
l
ØF
3,2
Grating pitch [arc length]: 1000 μm
N ØF [mm]
256 80,65 ±0,01
360 113,82 ±0,01
512 162,24 ±0,02
720 228,48 ±0,02
900 285,78 ±0,02
1024 325,25 ±0,02
1440 457,69 ±0,03
1800 572,31 ±0,06
2048 651,28 ±0,07
N: Integer number of grating pitches per revolution
*) Recommended eccentricity: Greater eccentricities up to ~0,05mm do not affect the function of the device, but cause a proportional loss in positioning accuracy.
Ordering code: WMRA-1010
WMRA-1010. -
Grating pitches / revolution (N)
Linearity error
0 ... ± 10 μm arc length
1 ... ± 5 μm arc length
2 ... ± 3 μm arc length
The production drawing for the carrier flange can be released by
AMO.
For applications with large diameters or significant variations in tem-perature
during operation and when the carrier flanges are not made
of steel, the system must be designed accordingly.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
12. Absolute Winkelmesssysteme
Absolute angle measuring systems
Technical data
12
Messringe - Innenabtastung
Measuring rings - inside scanning
Measuring rings for inside scanning
Thin, stainless steel measuring ring WMRA-1110 consisting of a steel
carrier ring and a graduation ring.
The ring can be mounted over a „snap-effect“ by the customer into a
corresponding groove or against a stop collar.
Außendurchmesser
Outer diameter
B
Innendurchmesser
Inner diameter
WMRA-1110
14
0,60
F
Special sizes with any number of pitches per revolution on request
WMRA-1110
Standard sizes N
1024 1440 1800 2048
Grating pitch [arc length]: 1000 μm
Grating accuracy [arc length]: ± 10 μm, ± 5 μm oder (or) ± 3 μm
Mechanical execution: Stainless steel measuring ring
Flange material: No special material required
Incremetal grating pitches / rev: 1024 1440 1800 2048
Absolute resolution / rev [increments] 1μm: 220 1440 x 210 1800 x 210 221
Absolute resolution / rev [increments] 0,25μm: 222 1440 x 212 1800 x 212 223
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
13. Sold & Serviced By:
13
Messringe - Innenabtastung
Measuring rings - inside scanning
Absolute Winkelmesssysteme
Absolute angle measuring systems
Mechanical design for WMRA-1110
WMRA-1110
+0,1
14,01 0
0,5
0,8 0,8
ØB
ØS = ØB - 1,15±0,05
Gratfrei
Burr free
3,2
0,005* A
0,02 A
0,02 A
A
ØS Länge >28mm
Freiraum für Abtastkopf
keep free for >28mm
Measuring head width
Grating pitch [arc length]: 1000 μm
N ØB [mm]
1024 326,62 ±0,02
1440 459,01 ±0,03
1800 573,56 ±0,06
2048 652,47 ±0,07
N: Integer number of grating pitches per revolution
*) Recommended eccentricity: Greater eccentricities up to ~0,05mm do not affect the function of the device, but cause a proportional loss in positioning accuracy.
Ordering code: WMRA-1110
WMRA-1110. -
Grating pitches / revolution (N)
Linearity error
0 ... ± 10 μm arc length
1 ... ± 5 μm arc length
2 ... ± 3 μm arc length
The production drawing for the carrier flange can be released by
AMO.
For applications with large diameters or significant variations in tem-perature
during operation and when the carrier flanges are not made
of steel, the system must be designed accordingly.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
14. Absolute Winkelmesssysteme
Absolute angle measuring systems
Scanning head for absolute angle measuring systems
14
Abtastkopf
Scanning head
Technical data
WMKA-2110x
inside scanning
WMKA-2010x
outside scanning
Operating temperature: -10°C … 85°C
Storage temperature: -20°C … 85°C
Protection class: IP67
Vibration: < 200 m/s² für (for) 55 – 2000 Hz
Shock: < 2000 m/s² für (for) 6 ms
Power supply: 3,5V to 5,5V
Power consumption: max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
Incremental grating pitch: 1000 μm
Max. input frequency: 39 kHz für alle absoluten Schnittstellen (2,4kHz bei 0,25μm) /for all absolute interfaces
60 kHz für 1Vss Ausgang / for 1Vpp output
System resolution: Absolutes interface:
Absolute interface:
bis zu 25 bit pro Umdrehung
up to 25 bit per revolution
Analogausgang 1Vss:
Analog output 1Vpp:
bis zu 31,25 μm
down to 31,25 μm
Absolute interfaces: SSI (200kHz ... 1MHz and Sine/Cosine)
BiSS/C (max. clock frequency: 2,5 MHz)
FANUC, DRIVE-CLiQ
Mitsubishi in preparation
Other interfaces on request
Suitable measuring scale: WMRA-1110
see page 12
WMFA-1010
WMBA-1010
WMRA-1010
see page 6
The scanning heads WMKA-2010x with integrated electronics can
be combined with measuring flanges WMFA-1010, WMBA-1010 or
measuring rings WMRA-1010 (see page 6).
The systems are insensitive against environmental pollution like (like
oil, coolant, dust ...).
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
15. Sold & Serviced By:
15
Abtastkopf
Scanning head
Absolute Winkelmesssysteme
Absolute angle measuring systems
Possible resolutions for 1Vpp output (only for SSI-interface)
Output frequency fa (input frequency for
subsequent electronics) is limited to 300
kHz for 1Vpp-systems.
Output signal
Sine 1Vpp
Type
WMKA
Signal periods
Max. input
frequency(1)
f[khz]
Power
consumption
[mA] at 5V
Teilungsfaktor
Dividing factor
Perioden
[Bogenlänge]
Periods
[arc length]
[μm]
2x100.x00(1) 1 1000 9 (10 bit)
2,4 (12 bit) max. 250
2x100.x10 1 1000
2x100.x11 8 125
2x100.x12 10 100
2x100.x13 25 40
9 (10 bit)
2,4 (12 bit) max. 250
2x100.x14 32 31,25
2x100.x15 4 250
2x100.x16 16 62,5
2x100.x30 1 1000 60 (10 bit) max. 250
I
6xM6
= 25 = ~6
A
50
4
2x 4,5
5,2
B
6x60°
A/2+k
Luftspalt 0,15±0,1
mit Folie einstellen
Air gap0,15±0,1
set with spacer film
26
15
Measuring head
22,1
14
5 ±0,5
Messflansch
Measuring flange
A
0,1 A
A
A
26
14
6 ±0,5
0,65
A
Messkopf
0,1 A
A
Messring
Measuring ring
Zählrichtung +
Count direction +
Assembly drawing WMKA-2010x
Assembly drawing WMKA-2110x
(1) Encoder for safety related applications
N
Pitches / rev
ØA/2 + k
[mm]
256 56,74
360 73,29
512 97,82
720 131,64
900 160,39
1024 180,33
1440 246,74
1800 304,25
2048 343,84
N
Pitches / rev k [mm]
1024 1,93
1440 1,37
1800 1,09
2048 0,96
= =
25
50
4
2x 4,5
5,2
18,1+k
14
26
0,15 ±0,1
6 ±0,5
Absolutspur
Absolut track
WMRA-1100
Zählrichtung
+ Count direction
Luftspalt mit Folie einstellen
Air gap set with spacer film
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
16. Absolute Winkelmesssysteme
Absolute angle measuring systems
WMKA-2 102 . 1 N - - 0,5 - 08 DRIVE CLiQ
WMKA-2 100 . - - , -
WMKA-2 10 . N- - , -
16
Abtastkopf
Scanning head
Ordering code: WMKA-2010x/2110x with SSI - Interface and DRIVE CLiQ
Ordering code: WMKA-2010x/2110x for interfaces other than SSI and DRIVE CLiQ
Cable length in meter
preferred cable length in steps of 0,5m
Grating pitches / revolution (N)
Interface
Type
1 ... BISS/C
3 ... FANUC
4(1) ... Mitsubishi
(1) in preparation
Absolute - Interface
Resolution in bit per grating pitch
1 .......10 bit
2 .......12 bit
Connector type
0 ...... none
2 ...... 20 pin FANUC connector
5 ...... 15 pin Sub-D connector
7 ...... 17 pin CONNEI coupling (male)
Max. input frequency
1 ... 9 kHz (10 bit) / 2,4kHz (12 bit)
2 ... 39 kHz (10 bit)
Design
0 ...Outside scanning
1 ...Inside scanning
,,
Cable length in meter
preferred cable length in steps of 0,5m
Absolute - Interface
Resolution in bit per grating pitch
1 .......10 bit
2 .......12 bit
Analog dividing factor 1Vpp
0 ......1 (1000 μm)
1 ......8 (125 μm)
2 ... 10 (100 μm)
3 ... 25 (40 μm)
4 ... 32 (31,25 μm)
5 ..... 4 (250 μm)
6 ... 16 (62,5 μm)
Max. input frequency
0(1,3) ... 9 kHz (10 bit) / 2,4 kHz (12 bit)
1 ... 9 kHz (10 bit) / 2,4 kHz (12 bit)
3(2,3) ... 60 kHz (10 bit)
(1) Encoder for safety related applications
(2) 60 kHz for 1Vpp output / 39 kHz for SSI interface
(3) only with analog dividing factor 1 possible
Connector type
0 ...... none
2 ...... 20 pin FANUC connector
5 ...... 15 pin Sub-D connector
7 ...... 17 pin CONNEI coupling (male)
8 ...... 8 pin M12 connector (just for DriveCLiQ)
Design
0 ... Outside scanning
1 ... Inside scanning
SSI
Grating pitches / revolution (N)
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
17. Sold & Serviced By:
17
Absolute length measuring systems
■■ Resolution up to 25 bit
■■ Available interfaces:
SSI, BiSS/C, Fanuc
■■ Measuring lengths up to 32m
■■ Protection class IP 67
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
18. Offene absolute Längenmesssysteme
Open absolute length measuring systems
At the open, non-guided systems a double sided adhesive foil is ap-plied
on the measuring scale for direct sticking on the machine bed. At
all of these versions the scanning still takes place without contact and
is therefore not subject to wear.
There are 2 different types of scales. Scale type LMBA-1110 for scale
length up to 9200 mm and scale type LMBA-2110 for scales with
more than 9200mm length.
Configuration
LMBA- 110. -
18
Maßbänder
Scales
LMBA-1110/2110
Scale for non-guided measuring systems, mounted with adhesive tape
Technical data
Abdeckband
Cover tape
Maßband
Measuring tape
Doppelseitiges Klebeband
Trägerband
Carrier tape
Adhesive tape
LMBA-1110 LMBA-2110
Incremental grating pitch: 1000 μm
Accuracy after linear compensation: ± 10 μm/m, ± 5 μm/m oder (or) ± 3 μm/m
Coefficient of expansion: ~ 11 ppm/K
Overall length GL: ≤ 9200 mm > 9200 mm, bis (up to) 32000 mm
Meauring length ML: ML = Gl - 50 mm
Mechanical execution: Stainless steel measuring tape with adhesive layer for mounting
Ordering code
Linearity error Overall length in mm
1 ... ± 10 μm/m
2 ... ± 5 μm/m
3 ... ± 3 μm/m
Overall length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
19. Sold & Serviced By:
19
Maßbänder
Scales
Offene absolute Längenmesssysteme
Open absolute length measuring systems
LMBA-1410/2410
Scale on stainless steel carrier, for non-guided measuring systems
The scale type LMBA-1410/2410 is designed for harsh applications
where adhesive backed scale tape is not appropriate. A slim stainless
steel carrier is attached to the machine with screws, with an interlocking
“snap cover” securing the scale tape in position.
There are 2 different types of scales. Scale type LMBA-1410 for scale
length up to 9200 mm and scale type LMBA-2410 for scales with
more than 9200mm length.
Main features of the LMBA - 1410/2410 carrier
■■ Mounting on the machine without any adhesive (ideal for
harsh environments, replacement or repairable mounting is
possible)
■■ Stainless steel scale carrier
■■ Measuring lengths up to 32 m
■■ Standard one meter carrier length, can be butted together for
ease of installation, optional single carriers up to three meters
are available
"Schnapp" Abdeckung
"Snap" cover
Maßband
Scale
Maßbandträger
Scale carrier
Maßbandklemme
Scale fixing bracket
Trägerband
Carrier tape
Configuration
Technical data
LMBA-1410 LMBA-2410
Incremental grating pitch: 1000 μm
Accuracy after linear compensation: ± 10 μm/m, ± 5 μm/m oder (or) ± 3 μm/m
Coefficient of expansion: ~ 11 ppm/K
Overall length: ≤ 9200 mm 9200 mm bis (up to) 32000 mm
Mechanical execution: Stainless steel measuring tape mounted on stainless steel carrier
Single carrier up to 3 m, lengths up to 32 m with multiple carriers
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
20. Offene absolute Längenmesssysteme
Open absolute length measuring systems
A-A (2 : 1)
10 ML KL 10
20
Maßbänder
Scales
LMBA - 1410/2410
Multiple section carrier, type M2
0
50 - 0,5
0
100
9x100 100
0
50 - 0,5
50 - 0,5
0
50 - 0,5
A
A
9x100 100
Trägerprofil Stoßstelle
Carrier joint point
Maßbandträger
Scale carrier
Maßband
Scale
GL
Abtastkopf
Scanning head
"Schnapp" Abdeckung
"Snap" cover
Maßbandklemme
Scale fixing bracket
Zählrichtung
Count direction +
1000
1000 RL
50 100 100,50 (k-1) x 100 50
GL
9 x 100
22
14
7,5
4,5
18
3
6,9
5,1
0,5x45°
Flachkopfschraube
Flat head screw
M4x6 DIN 7984
■■ Multiple carriers in 1000 mm modules
■■ Overall length in steps of 200 mm
GL = (n x 1000) + RL [mm]
i.e.: 1200 mm, 1400 mm, 1600mm, ...
■■ Scale loose mounted on the carrier and fixed with the cover
tape
■■ Any measuring lengths up to 32 m
■■ Can be combined with scanning head LMKA-1110x for overall
length ≤ 9200 mm
or scanning head LMKA-2110x for overall length >9200 mm
GL = (n x 1000) + RL [mm] n = 1, 2, 3, ... GL ... overall length
RL = (k x 100) [mm] k = 2, 4, 6 ,8 RL ... remaining length
ML = GL - 70 mm ML ... measuring length
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
21. Sold & Serviced By:
21
Maßbänder
Scales
Offene absolute Längenmesssysteme
Open absolute length measuring systems
LMBA - 1410
Single section carrier, type E2
0
50 - 0,5
mx100
10 ML KL 10
GL = (m +1) x 100 [mm] m = 1, 2, 3, ... , 29 GL ... Gesamtlänge / overall length
ML = GL - 70 mm ML ... Messlänge / measuring length
0
50 - 0,5
100
A
A
Maßbandträger
Scale carrier
Maßband
Scale
GL
Maßbandklemme
Scale fixing bracket
Abtastkopf
"Schnapp"- Abdeckung Scanning head
"Snap"- cover
22
14
7,5
4,5
18 ±0,05
05x45°
5,1
6,9
A-A (2 : 1)
Flachkopfschraube
Flat head screw
4x6 DIN 7984
Zählrichtung
+ Count direction
■■ Single carrier up to 3000 mm in length
■■ Overall length in steps of 100 mm
GL = (m + 1) x 100 [mm]
i.e.: 200 mm, 300 mm, ... , 3000 mm
■■ Scale loose mounted on the carrier and fixed with the cover
tape
■■ Can be combined with scanning head LMKA-1110x
Ordering code
Overall length in mm
Linearity error
1 ... ± 10 μm/m
2 ... ± 5 μm/m
3 ... ± 3 μm/m
Overall length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Carrier type
E2 ... Single section carrier
M2 ... Multiple section carrier
LMBA- 410. - -
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
22. Offene absolute Längenmesssysteme
Open absolute length measuring systems
LMKA-1110x/2110x
Scanning head for non-guided absolute length measuring systems
The open, non-guided scanning heads with integrated electronics can
be combined with measuring scale types LMBA-1110/2110 or LMBA-
1410/2410 (see page 18).
Scanning head LMKA-1110x can be used only with scale type LMBA-
1110 or LMBA-1410, scanning head LMKA-2110x can be used only
with scale type LMBA-2110 or LMBA-2410.
The systems are insensitive against environmental pollution like (like
oil, coolant, dust ...).
22
Abtastkopf
Scanning head
Technical data
LMKA-1110x LMKA-2110x
Operating temperature: -10°C … 85°C
Storage temperature: -20°C … 85°C
Protection class: IP67
Vibration: < 200 m/s² für (for) 55 – 2000 Hz
Shock: < 2000 m/s² für (for) 6 ms
Power supply: 3,5V to 5,5V
Power consumption: max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
Incremental grating pitch: 1000 μm
Max. scale length: ≤ 9200 mm > 9200 mm
Max. speed: 10 m/s for 1μm 2,5 m/s for 0,25μm
System resolution: Absolute interface: 1 μm / 0,25 μm
Analog output 1Vpp: 1000 μm or 40 μm
Absolute interfaces: SSI (200kHz ... 1MHz and Sine/Cosine)
BiSS/C (max. clock frequency: 2,5 MHz)
FANUC, DRIVE-CLiQ
Mitsubishi & Yaskawa in preparation)
Other interfaces on request
Suitable measuring scale: LMBA-1110
LMBA-1410
see page 18
LMBA-2110
LMBA-2410
see page 18
Bestellcode siehe Seite 29/30
Order codes see on page 29/30
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
23. Sold & Serviced By:
23
Abtastkopf
Scanning head
Offene absolute Längenmesssysteme
Open absolute length measuring systems
Possible resolutions for 1Vpp output (only for SSI-interface)
Output signal
Sine 1Vpp
Type
LMKA
Signal periods Maximum
speed
[m/s]
Power
consumption
[mA] at 5V
Dividing factor
Periods
[arc length]
[μm]
x1100.100(1) 1 1000 10 max. 250
x1100.110 1 1000
10 max. 250
x1100.113 25 40
x1100.200(1) 1 1000 2,5 max. 250
x1100.210 1 1000
2,5 max. 250
x1100.213 25 40
~6
5,2
50
= 25 =
2 x 4,5
Assembly drawings LMKA-1110x/2110x
0,8
19,1
23,1
Messkopf
Measuring head
0,1
14
GL
6 ±0,5 Maßband
Scale
Absolutspurseite
Absolut track side
0,1
0,1/1000
0,15 0,1
26
22,1
0,1
A
Luftspalt mit Folie eingestellt
Air gap set with spacer film
+ Zählrichtung
Count direction
Scale type LMBA-1110/2110
(1) Encoder for safety related applications
50
nx100
5,2
= 25 =
18,25 4
2x 4,5
5,1
Zylinderschrauben M4x6
Maßstab LMBA-400
Scale LMBA-400
0,1 0,05/1000
18
= =
Absolutspurseite
Absolut track side
A
A
0,1
0,1/1000
26
0,15 ±0,1
4 ±0,5
22,1
27,4
0,1
+ Zählrichtung
Count direction
Luftspalt mit Folie eingestellt
Air gap set with spacer film
DIN 7984
Scale type LMBA-1410/2410
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
24. Geführte absolute Längenmesssysteme
Guided absolute length measuring systems
At the guided measuring systems the scale is integrated in a guiderail.
The measuring rail LMFA-1310/2310 is available in single or multiple
sections.
There are 2 different types of scales. Scale type LMFA-1310 for scale
length up to 9200 mm and scale type LMFA-2310 for scales with more
than 9200mm length.
Configuration
24
Maßbänder
Scales
LMFA-1310/2310
Measuring rail for guided AMOSIN® measuring systems
Technical data
"Schnapp" Abdeckung
"Snap" Cover
Montage Bohrungen
für die Messschiene
Mounting hole for
the measuring rail
Maßband mit
Trägerband
Measuring scale
with carrier tape
LMFA-1310 LMFA-2310
Grating pitch:
1000 μm
Accuracy after linear compensation:
± 10 μm/m, ± 5 μm/m or ± 3 μm/m
Coefficient of expansion:
~ 11 ppm/K
Overall length:
≤ 9200 mm > 9200mm (bis zu / up to 32 000 mm)
Mechanical execution:
Standard guide rail with integrated measuring scale
Maßbandklemme
(an beiden Enden)
Scale fixing bracket
(on both ends)
Messschiene
Measuring rail
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
25. Sold & Serviced By:
25
Maßbänder
Scales
Geführte absolute Längenmesssysteme
Guided absolute length measuring systems
■■ Single section measuring rail for measuring lengths up to
■■ Measuring length in steps of 60 mm
ML = (m x 60) - 40 [mm]; m ≥ 2
i.e.: 80 mm, 140 mm, ... , 3860 mm
■■ Can be combined with scanning heads LMKA-1310x
60
mx60
60
30 30
GL-Gesamtlänge /
0,4
9,4
6
3860 mm
13,2 ±0,5
20
20,55
Achtung!
Am Schienenende mit dem
Spannelement muß
ausreichend Platz für die
Montage bzw. Demontage
des Messwagens frei bleiben.
Warning!
Equipment design
considers here free
space for slider
mounting.
Overall length
+0
-1,0
+0
-1,0
LMFA - 1310
Single section measuring rail
GL = ((m + 1) x 60) [mm] m = 2, 3, 4, ... , 65 GL ... overall length
ML = GL - 100 [mm] ML ... measuring length
Max. total length: 3960 mm
Max. measuring length: 3860 mm
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
26. Geführte absolute Längenmesssysteme
Guided absolute length measuring systems
LMFA - 1310/2310
Multiple section measuring rail
■■ Multiple section measuring rail for measuring lengths greater
■■ Measuring length in steps of 60 mm
■■ Can be combined with scanning heads LMK-1310x/2310x
LMFA- 310. -
26
Maßbänder
Scales
than 3860 mm
ML = (n x 3900) + (m x 60) -40 [mm]
30 mx60 30 30 64x60=3840 30
RL-Schinenreststück / nx3900
GL-Gesamtlänge /
+0
-1,0
+0
-1,0
0,4
9,4
6
13,2 ±0,5
20
20,55
Achtung!
Am Schienenende mit dem
Spannelement muß
ausreichend Platz für die
Montage bzw. Demontage
des Messwagens frei bleiben.
Warning!
Equipment design
considers here free
space for slider
mounting.
Overall length
Rest length rail
GL = (n x 3900) + RL [mm] n = 1, 2, 3, ... GL ... overall length
RL = ((m + 1) x 60) [mm] m = 1, 2, 3, ... 64 RL ... Remaining length
ML = GL - 100 [mm] ML ... measuring length
Ordering code
Measuring length in mm
Linearity error
1 ... ± 10 μm/m
2 ... ± 5 μm/m
3 ... ± 3 μm/m
Overall length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Coating
0 ... ohne / without
1 ... mit Cr / with Cr
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
27. LMKA-1310x/2310x
Scanning head for guided absolute length measuring systems
Sold & Serviced By:
27
Abtastkopf
Scanning head
Geführte absolute Längenmesssysteme
Guided absolute length measuring systems
Technical data
LMKA-1310x LMKA-2310x
Operating temperature: 0°C … 80°C
Storage temperature: -20°C … 85°C
Protection class: IP67
Vibration: < 200 m/s² für (for) 55 – 2000 Hz
Shock: < 2000 m/s² für (for) 6 ms
Power supply: 3,5V to 5,5V
Power consumption: max. 250 mA @ 5,0V (360mA @ 3,5V; 230mA @ 5,5V)
Incremental grating pitch: 1000 μm
Max. scale length: ≤ 9200 mm > 9200 mm
Max. speed: 5 m/s für 1μm; 2,5 m/s für 0,25μm, limited by the mechanics
System resolution: Absolute interface: 1 μm / 0,25μm
Analog output 1Vpp: 1000 μm or 40 μm
Absolute interfaces: SSI (200kHz ... 1MHz and Sine/Cosine)
BiSS/C (max. clock frequency: 2,5 MHz)
FANUC, DRIVE-CLiQ
Mitsubishi & Yaskawa in preparation
Other interfaces on request
Suitable measuring scale: LMFA-1310
see page 25
LMFA-2310
see page 25
The guided scanning heads LMKA-1310x/2310x with integrated eva-luation
electronics can be combined with the measuring rails LMFA-
1310/2310 (see page 25).
Scanning head LMKA-1310x can be used only with rail type LMFA-
1310 and scanning head LMKA-2310x can be used only with rail type
LMFA-2310.
The systems are insensitive against environmental pollution (i.e. oil,
coolant, ...). Because of the option to mount the scanning head using
the mounting spring high mounting tolerances, especially for longer
measuring length, can be realized.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
28. Geführte absolute Längenmesssysteme
Guided absolute length measuring systems
28
Abtastkopf
Scanning head
Possible resolutions for 1Vpp output (only for SSI-interface)
Output signal
Sine 1Vpp
Type
LMKA
Signal periods Maximum
speed
[m/s]
Power
consumption
[mA] at 5V
Dividing factor
Periods
[arc length]
[μm]
x3100.100(1) 1 1000 5 max. 250
x3100.110 1 1000
5 max. 250
x3100.113 25 40
x3100.200(1) 1 1000 2,5 max. 250
x3100.210 1 1000
2,5 max. 250
x3100.213 25 40
24
2
54,75
40,75
49,75
27,7
20
5,2
2x 4,4
2 = 20 =
75
2x<M4/6 tief
34,75
Federelement
Mounting spring
2xM4/6 deep
14
25,8
44
Maßbandklemme
Scale fixing bracket
Absolut Spur
Absolut track
Assembly drawings LMKA-1310x/2310x
(1) Encoder for safety related applications
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
29. Sold & Serviced By:
29
Abtastkopf
Scanning head
Offene absolute Längenmesssysteme
Open absolute length measuring systems
SSI
LMKA- 1100 . - , -
Kabellänge in Meter
Cable length in meter
Bevorzugte Kabellänge in 0,5m Schritten
preferred cable length in steps of 0,5m
Massbandlänge
Scale length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Absolute - Interface
Auflösung in bit/Teilungsperiode (1)
Resolution in bit per grating pitch (1)
1 .......1μm
2 .......0,25μm
4 .......1μm (2)
5........0,25 μm (2)
(1) SSI Beschreibung auf Homepage www.amo-gmbh.com
SSI Description on our website www.amo-gmbh.com
(2) für neue Projekte, siehe SSI Beschreibung
for new Projects, see SSI Description
Steckertyp
Connector type
0 ...... ohne / none
2 ...... 20 pol FANUC Stecker
20 pin FANUC connector
5 ...... 15 pol. Sub-D Stecker
15 pin Sub-D connector
7 ...... 17 pol. CONNEI Kupplung (Stift)
17 pin CONNEI coupling (male)
LMKA- 3100 . - , -
Max. Eingangsfrequenz
Max. input frequency
(nur für SSI / only for SSI)
0(1) ... 9 kHz (1μm) / 2,4 kHz (0,25μm)
1 ... 9 kHz (1μm) / 2,4 kHz (0,25μm)
(1) Geber für sicherheitsgerichtete Anwendungen
Encoder for safety related applications
Nur mit analogen Teilungsfaktor 1 möglich
only with analog dividing factor 1 possible
Analoger Teilungsfaktor 1Vss
Analog dividing factor 1Vpp
(nur für SSI / only for SSI)
0 ... 1 (1000 μm)
3 ... 25 (40 μm)
Bestellcode: LMKA-1310x/2310x/1110x/2110x mit SSI Interface
Ordering code: LMKA-1310x/2310x/1110x/2110x with SSI Interface
SSI geführt / guided
Bestellcode: LMKA-1310x/2310x/1110x/2110x
Ordering code: LMKA-1310x/2310x/1110x/2110x
LMKA- 110 . NN - , -
LMKA- 310 . NN - , -
Kabellänge in Meter
Cable length in meter
Bevorzugte Kabellänge in 0,5m Schritten
preferred cable length in steps of 0,5m
Massbandlänge
Scale length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Absolute - Interface
Auflösung in μm
Resolution in μm
1 .......1μm
2 .......0,25μm
Steckertyp
Connector type
0 ...... ohne / none
2 ...... 20 pol FANUC Stecker
20 pin FANUC connector
5 ...... 15 pol. Sub-D Stecker
15 pin Sub-D connector
7 ...... 17 pol. CONNEI Kupplung (Stift)
Interface 17 pin CONNEI coupling (male)
Type
1 ... BISS/C
3 ... FANUC
4 (1).. Mitsubishi
5 (1).. Yaskawa
(1) In Vorbereitung
in preparation
geführt / guided
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
30. Geführte absolute Längenmesssysteme
Guided absolute length measuring systems
30
Abtastkopf
Scanning head
Bestellcode: LMKA-1310x/2310x/1110x/2110x mit DRIVE CLiQ - Interface
Ordering code: LMKA-1310x/2310x/1110x/2110x with DRIVE CLiQ - Interface
Massbandlänge
Scale length
1 ... ≤ 9200 mm
2 ... > 9200 mm
Absolute - Interface
Auflösung in μm
Resolution in μm
1 .......1μm
2 .......0,25μm
Max. Eingangsfrequenz
Max. input frequency
1 ... 9 kHz (1μm) / 2,4 kHz (0,25μm)
Steckertyp
Connector type
8 ...... 8 pol M12 Stecker (nur für DriveCLiQ)
8 pin M12 connector (just for DriveCLiQ)
LMKA- 3102 . 1 N - 0,5 - 08
Kabellänge 0,5 Meter
Cable length 0,5 meter
LMKA- 1102 . 1 N - 0,5 - 08
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
31. Sold & Serviced By:
31
Allgemeine Informationen
General information
Maximale Drehzahlen
Maximum speed
Maximum speed
a) Max. speed
The maximum speed nmax of a measuring system can be calculated considering the max. input frequency f of the scanning head and the num-ber
of pitches per revolution N of the measuring flange as follows:
nmax [U/min] = f[Hz] x 60 / N
nmax [rpm] = f[Hz] x 60 / N
b) Output frequency
The max. output signal frequency fa of the scanning head depends on the max. speed n used in the application, the number of grating pitches
per revolution N and the dividing factor D of a scanning head.
It’s important to not exceed the max. input frequency of the subsequent electronics.
fa [Hz] = (n[rpm] / 60) x N x D for scanning head with 1Vpp output
Maximum rotary speeds for standard measuring flanges respectively measuring rings are shown below.
Type
Max. input
frequency
f[khz]
Rotary speed n [rev/min]
Standard measuring flange WMFA-210x or measuring ring WMRA-210x
0256 0360 0512 0720 0900 1024 1440 1800 2048
WMKA-2x100.100 9 2100 1500 1050 750 600 520 370 300 260
WMKA-2x10x.1xx 9 2100 1500 1050 750 600 520 370 300 260
WMKA-2x100.130 60 14000 10000 7000 5000 4000 3500 2500 2000 1750
WMKA-2x10x.2xx 2,4 560 400 280 200 160 140 100 80 70
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
32. Kabel
Cable
32
Allgemeine Informationen
General information
Ordering code: extension cable
Kabellänge /Cable length Stift
VK - 4 - - -
10A ... without connector
15A ... 15 pin SUB-D
18A ... 17 pin CONNEI connector CCW
19A ... Special connector or special pin assignments
00A ... without connector
02A 20 pin FANUC connector
05A ... 15 pin SUB-D
07A ... 17 pin CONNEI coupling CW
09A ... Special connector or special pin assignments
Cable length
in meter
Pin
Verlängerungskabel
Extension cable
Buchse
Socket
Messsystem
Measuring system
Cable
Cable for measuring system Extension cable
Jacket: PUR, high flexible, suitable for energy chains
Diameter: 5,3mm ~ 8mm
Wires: 5 (2 x 0,05) + 1 ( 2 x 0,14) mm2 4 (2 x 0,14) + 2 ( 2 x 0,5) mm2
Bending radius:
Single bending: 5 x d = 25mm 5 x d = 40mm
Continuous bending: 10 x d = 50mm 10 x d = 80mm
Max. length: 9m 50m
Technical data
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
33. PIN 7 1 10 4 15 16 12 13 14 17 8 9
Signal +5V 5V-Sensor 0V 0V-Sensor A+ A- B+ B- Data+ Data- Clock+ Clock-
Color red red-white blue blue-white green yellow brown white violet black pink grey
Sold & Serviced By:
33
Allgemeine Informationen
General information
Steckerbelegungen
Plug and pin assignments
Plug and connection assignments
17 pin CONNEI - coupling (male) 58
Shield on housing
15-pin SUB-D connector
26
M23x1
Power supply Incremental signals Absolute interface
Power supply Incremental signals Absolute interface
PIN 4 12 2 10 1 9 3 11 5 13 8 15
Signal +5V 5V-Sensor 0V 0V-Sensor A+ A- B+ B- Data+ Data- Clock+ Clock-
Color red red-white blue blue-white green yellow brown white violet black pink grey
Shield on housing
20 pin FANUC connector
No connection allowed on unused pins.
11 12 13 14 15 16 17 18 19 20
Power supply Absolute interface shield
PIN 18 20 14 12 1 2 5 6 16
Signal +5V +5V 0V 0V Data+ Data- Clock+ Clock- shield
Color red red-white blue blue-white violet black pink grey
Shield on housing
1 2 3 4 5 6 7 8 9 10
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
35. Additional product brochures
Product overview
AMO GmbH
Spindle encoder
■ Kompakte Bauform
Compact desig
■ Höchste Drehzahlen bis zu
26.000 U/min
High speeds up to
26,000 rpm
■ Hohe EMV-Festigkeit
High EMC immunity
■ Keine magnetischen
Komponenten oder Felder,
Hysterese oder Entmagneti-sierungsgefahr
No magnetic components
No magnetic field hystere-sis
or demagnetisation risk
■ Schutzklasse IP67
wasserdichte Impulsgeber
Protection class IP67
Fluid submersible encoders
AMO GmbH
Spindelgeber
nach dem AMOSIN® – Messprinzip
Spindle encoder based on the AMOSIN® –
Inductive Measuring Principle
■ Inductive encoders comparable
to optical encoders in both,
accuracy and resolution
■ No magnetic components, no
magnetic fields, hysteresis or
demagnetisation risk
■ Protection class IP67
Fluid submersible encoders
Product overview:
Incremental
LENGTH- AND ANGLE MEASURING
SYSTEMS based on the AMOSIN® –
Inductive Measuring Principle
Length measuring systems
AMO GmbH
Inkrementelle LÄNGENMESSSYSTEME
nach dem
induktiven AMOSIN® – Messprinzip
Incremental LENGTH MEASURING SYSTEMS
based on the
AMOSIN® – Inductive Measuring Principle
Angle measuring systems
AMO GmbH
Inkrementelle WINKELMESSSYSTEME
nach dem
induktiven AMOSIN® – Messprinzip
Incremental ANGLE MEASURING SYSTEMS
based on the
AMOSIN® – Inductive Measuring Principle
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
36. AMO GmbH
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com