The document describes the Mercury 3000 smart encoder system from MicroE Systems. It provides high resolution position measurement down to 0.020μm for linear scales and 16.8 million counts per revolution for rotary scales. The Mercury 3000 features the smallest sensor size, easiest alignment, and best noise immunity compared to competing encoder systems. It includes programmable interpolation, LED indicators for setup, and SmartPrecision electronics for interfacing.
ADCMT Optical Power Meter 8230
The 8230 is a handheld optical power meter, which is most suitable for R&D and production of LDs, optical pickups, and drives for optical disks. Threre are nine kinds of optical sensors with different shapes (thin-type, cylindrical-type) are available. The three-wavelength optical sensors 82314B, 82324B and 82314BW are capable of measuring 405nm, 650nm, 780nm wavelength ranges. The blue-violet optical sensors 82312B and 82322B have realized a flat wavelength sensitivity characteristic and low dependency on an angle of incidence in the 405 nm range. The high-power optical sensors 82313B and 82323B enable high-power measurement of up to 200 mW. The main body that has 5½ digits and 0.001dB resolution display can obtain measurement data easily by using the USB interface installed as standard.
Three-wavelength optical sensors covering 405/650/780nm
https://www.n-denkei.com/singapore/inquiry/
ADCMT Optical Power Meter 8230
The 8230 is a handheld optical power meter, which is most suitable for R&D and production of LDs, optical pickups, and drives for optical disks. Threre are nine kinds of optical sensors with different shapes (thin-type, cylindrical-type) are available. The three-wavelength optical sensors 82314B, 82324B and 82314BW are capable of measuring 405nm, 650nm, 780nm wavelength ranges. The blue-violet optical sensors 82312B and 82322B have realized a flat wavelength sensitivity characteristic and low dependency on an angle of incidence in the 405 nm range. The high-power optical sensors 82313B and 82323B enable high-power measurement of up to 200 mW. The main body that has 5½ digits and 0.001dB resolution display can obtain measurement data easily by using the USB interface installed as standard.
Three-wavelength optical sensors covering 405/650/780nm
https://www.n-denkei.com/singapore/inquiry/
Com o HitApps você garante o espaço para a sua marca de forma rápida nas lojas App Store da Apple e Google Play além de contar com inúmeros recursos inovadores de interação com seu público.
Talhunt is a leader in assisting and executing IEEE Engineering projects to Engineering students - run by young and dynamic IT entrepreneurs. Our primary motto is to help Engineering graduates in IT and Computer science department to implement their final year project with first-class technical and academic assistance.
Project assistance is provided by 15+ years experienced IT Professionals. Over 100+ IEEE 2015 and 200+ yester year IEEE project titles are available with us. Projects are based on Software Development Life-Cycle (SDLC) model.
Yesaya 9:6 Sebab seorang anak telah lahir untuk kita, seorang putera telah diberikan untuk kita; lambang pemerintahan ada di atas bahunya, dan namanya disebutkan orang: Penasihat Ajaib, Allah yang Perkasa, Bapa yang Kekal, Raja Damai.
The company is engaged in designing and manufacturing encoders for precise position and motion control. What started four decades ago as an offshoot of Machine Tool Manufacturing , is now a world class company offering solutions globally in precision measurement. \nHaving Customer focus and team work as core values, EMS has innovated and continually improved their products to offer an optimal solutions to changing markets. Today, we are an ISO 9001:2015 company with state of the art factory having integral facilities for everything from design to delivery under one roof.
Mitsubishi ac servos melservo j3-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Similar to Micro e systems_mercury3000_datasheet (17)
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
Micro e systems_mercury3000_datasheet
1. Sold & Serviced By:
Mercury TM 3000 Smart Encoder Systems
Programmable Interpolation in Integer Steps to 0.020μm
Reflective Linear and Rotary Encoder Systems
Imagine what you can do with this!
The new Mercury 3000 can reduce the cost and size of your system, and improve
its performance all at once! MicroE Systems’ Mercury 3000 kit encoders are
smaller, higher performance, faster to install, and easier to set up and align than
any other encoder. The tiny sensor fits into very tight spaces and works in both
linear and rotary applications.
Next Generation Ruggedized
Design Replaces Mercury 3100
Resolution
Linear: 5μm to 0.020μm
Rotary: 6,600 to 16.8 M CPR
Accuracy
Linear: ± 1μm available
± 3μm to ± 5μm standard
Rotary: Up to ± 2.1 arc-sec
Output
A-quad-B and Index Pulse
Table of Contents
System & Sensor pg 1-5
SmartPrecision Electronics pg 6-7
SmartPrecision Software pg 8
Scales pg 9-10
Ordering Information pg 10
• New metal enclosure for SmartPrecision™ electronics
Best-in-Class noise immunity for harsh environments
Shorter length for smaller, tighter cabinets
Frame mounting compatible for easy installation
Robust metal housing with easy access locking screws
• Double shielded long life cable
• CE compliant
Standard features
• Smallest sensor- 1/3 the size of other encoders
• Revolutionary bolt-in alignment for many applications
• Advanced SmartPrecision electronics built into shielded D-sub connector
• A-quad-B output with programmable interpolation in integer steps for
resolutions to 0.020μm (linear); 16.8M CPR (rotary)
• LED set up indicators for sensor alignment and index location
• Bi-directional index signal is repeatable to encoder resolution
Optional features
• Glass scale length or diameter
Linear lengths from 5mm to 2m
Rotary diameters from 12mm to 108mm
• Cable length of 0.5m,1m, 2m, or custom
• SmartPrecision Software
Sensor the
size of a Dime
New design for more
robust performance
The New Mercury 3000 encoder represents the next level of encoder performance. With programmable interpolation, smallest sensor size,
easiest alignment, and superior noise immunity, the M3000 delivers Best-in-Class performance.
New features
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
2. System Configurations
Standard and Optional Equipment
RS 232 Interface
Adapter
The adapter provides
connections to a PC,
the encoder system
and the controller.
Sold & Serviced By:
M3000 Smart Encoder Systems
Standard Equipment
M3000
Optional Equipment
SmartPrecision™ Software
The software module enables
all programmable and diagnostic
features plus displays encoder
output and signal strength.
See page 8 for details.
Page 2 of 10
M10
Encoder Sensor
Same for linear and
rotary scales.
SmartPrecision™ Electronics
Module
New Metal Enclosure Provides
Best-in-Class Noise Immunity
Sensor Cable
The standard cable is
double shielded and
available in lengths of
0.5m, 1m or 2m.
A 15 pin high density
D-sub connector mates
to the customer controller.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
3. Sold & Serviced By:
Broader Alignment Tolerances,
Increased Standoff Clearance, Smallest Sensor and More
Why Mercury Encoders Make It Easier To Design High Performance Into Your Equipment
Eliminate the Frustration of Touchy
Encoder Alignment
Mercury Solves this Problem for Good
Fussy alignment is no longer a concern. With Mercury’s
patented PurePrecision™ optics, advanced SmartPrecision™
electronics and LED alignment indicators, you can push the
sensor against your reference surface, tighten the screws and
you’re finished. Try that with brand X or Y.
This performance is possible thanks to relaxed alignment
tolerances, particularly in the theta Z axis. Mercury offers a
± 2° sweet spot– that’s a 300% improvement over the best
competitive encoder. And that will result in dramatic savings
in manufacturing costs.
No other commercially available encoder is easier to align,
easier to use, or easier to integrate into your designs.
Page 3 of 10
Theta Z Alignment Tolerance
± 2° ± 0.5° ± 0.006°
Mercury Brand Y Brand X
Alignment Tolerance Comparison**
Mercury* Brand X Brand Y Mercury vs. Best Competitor
Z Standoff ± 0.15mm ± 0.1mm ± 0.1mm Mercury is 50% better
Y ± 0.20mm for linear ± 0.1mm unspecified Mercury is 100% better
>_
± 0.10mm for rotary 19mm dia.
theta X ± 1.0° unspecified ± 1.0°
theta Y ± 2.0° ± 0.1° ± 1.0° Mercury is 100% better
theta Z ± 2.0° ± 0.006° ± 0.5° Mercury is 300% better
*Measured at a constant temperature for one axis at a time with all other axes at their ideal positions.
**Based on published specifications
Mercury Can Reduce System Size and Cost
Mercury’s sensor height is 44% shorter than competitive encoders,
making it easy to fit into your design. This reduction can also cut total
system weight and cost by allowing the use of smaller motors and
stages. Safe system operation is also enhanced thanks to Mercury’s
generous standoff clearance– 200% greater than other encoders.
And its standoff tolerance is 50% greater than the best alternative.
This significantly relaxes mechanical system tolerances,
while reducing system costs.
Mechanical Dimension Comparison**
Mercury Brand X Brand Y Mercury vs.
Best Competitor
Sensor Z height 8.4mm 23mm 15mm 44% better
Standoff clearance 2.4mm 0.5mm 0.8mm 200% better
Standoff tolerance ± 0.15mm ± 0.1mm ± 0.1mm 50% better
System height 11.7mm 28.5mm 15.8mm 26% better
**Based on published specifications
Mercury
Brand Y
Brand X
Standoff Clearance
2.4mm*
± 0.15mm
0.8mm
± 0.1mm
0.5mm
± 0.1mm
* Dimensions shown illustrate encoder system standoff clearance; see Mercury
Encoder Interface Drawings for correct design reference surfaces.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
4. System Specifications
Resolution and Maximum Speed
Mercury 3000 systems have programmable interpolation from x4 to x1024 in integer steps.
Below is a table of sample values.
Sold & Serviced By:
Rotary - 20μm grating pitch
Rotary Fundamental Interpolation
Glass Scale Resolution Note: The range of available values is x4 to x1024
Diameter in integer steps; example values below.
0.472” [12.00mm] 1650 CPR x4 x100 x256 x1024
interpolated resolution (CPR) 6,600 165,000 422,400 1,689,600
interpolated resolution (arc-sec/count)** 196.4 7.85 3.08 0.767
interpolated resolution (μrad/count)** 952 38.0 14.86 3.79
maximum speed* (RPM) 13090 10470 4090 1020
0.750” [19.05mm] 2500 CPR x4 x100 x256 x1024
interpolated resolution (CPR) 10,000 250,000 640,000 2,560,000
interpolated resolution (arc-sec/count)**129.6 5.18 2.03 0.506
interpolated resolution (μrad/count)** 628.3 25.1 9.8 2.5
maximum speed* (RPM) 8640 6912 2700 675
1.250” [31.75mm] 4096 CPR x4 x100 x256 x1024
interpolated resolution (CPR) 16,384 409,600 1,048,576 4,194,304
interpolated resolution (arc-sec/count)** 79.1 3.16 1.24 0.309
interpolated resolution (μrad/count)** 383.5 15.3 6.0 1.5
maximum speed* (RPM) 5273 4219 1648 412
2.250” [57.15mm] 8192 CPR x4 x100 x256 x1024
interpolated resolution (CPR) 32,768 819,200 2,097,152 8,388,608
interpolated resolution (arc-sec/count)** 39.6 1.58 0.618 0.154
interpolated resolution (μrad/count)** 191.7 7.7 3.0 0.7
maximum speed* (RPM) 2637 2109 824 206
4.250” [107.95mm] 16384 CPR x4 x100 x256 x1024
interpolated resolution (CPR) 65,536 1,638,400 4,194,304 16,777,216
interpolated resolution (arc-sec/count)** 19.7 0.791 0.309 0.0772
interpolated resolution (μrad/count)** 95.9 3.83 1.5 0.4
maximum speed* (RPM) 1318 1054 412 103
*Maximum speed produces an encoder quadrature output of up to 28.8 million states per second.
** Resolution values shown are approximate. To calculate exact resolution values, convert from CPR (Counts Per Revolution) to the desired units.
Note: Specifications assume XOR function which is available in all standard controllers.
To calculate desired rotary interpolation multiplier, use the following equation
Interpolation Multiplier = Desired Resolution (CPR) / Fundamental Scale Resolution (CPR)
All Specifications are subject to change. All data is accurate to the best of our knowledge. MicroE Systems is not responsible for errors.
Page 4 of 10
Linear - 20μm grating pitch
Interpolation Resolution Maximum Speed*
x4 5.000μm/count 7200mm/s
x10 2.000μm/count 7200mm/s
x20 1.000μm/count 7200mm/s
x40 0.500μm/count 7200mm/s
x80 0.250μm/count 7200mm/s
x100 0.200μm/count 5760mm/s
x200 0.100μm/count 2880mm/s
x400 0.050μm/count 1440mm/s
x1000 0.020μm/count 576mm/s
To calculate desired linear interpolation multiplier, use the following equation
Interpolation Multiplier = Grating Period (20μm) / Desired Resolution (μm/count)
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
5. Mechanical Information - Sensor
19.7 [500] or 39.4 [1000]
or 78.7 [2000] ±.50 [12.7]
.142 [3.61]
CABLE DIAMETER
.272 6.91
.166 4.22
.058 1.47
.13 3.4
Sold & Serviced By:
.037 0.94
A
SENSOR MTG SURFACE
.24 6.2
.080 2.03
.650 16.5
.083 2.11
.155 3.94
.334 8.5
.500 12.70
.405 10.29
.810 20.57
2X .106 2.69
THRU.
.345 8.75
B
C
All Specifications are subject to change. All data is
accurate to the best of our knowledge. MicroE
Systems is not responsible for errors.
Page 5 of 10
System Specifications
System
Grating Period 20μm
Signal Period 20μm
System Resolution 5μm - 0.020μm in integer interpolation steps (factory set or user
programmed using MicroE SmartPrecision Software)
Linear accuracy*
Interpolation
accuracy: Better than ± 0.12μm over any 20μm movement
Long-travel
accuracy: ±1μm accuracy available - consult MicroE
Better than ± 3μm for scales up to 130mm
Better than ±5μm for scales 155mm to 1m
Better than ±5μm per meter for scales 1m or more
*Maximum peak to peak error over the specified movement when compared to a NIST-traceable laser interferometer standard, used
at room temperature and with MicroE interpolation electronics.
Rotary Accuracy* Scale O.D. Microradians Arc-Seconds
12.00mm ±100 ±21
19.05mm ±63 ±13
31.75mm ±38 ±7.8
57.15mm ±19 ±3.9
107.95mm ±10 ±2.1
*Based on ideal scale mounting concentricity
Sensor Size
W: 12.70mm 0.500"
L: 20.57mm 0.810"
H: 8.38mm 0.330"
Operating and Electrical Specifications
Power Supply 5VDC ±5% @ 330mA (30mA for sensor)
Temperature
Operating: 0 to 70°C
Storage: -20 to 70°C
Humidity: 10 - 90% RH non-condensing
EMI: CE Compliant
Shock: 1500G 0.5 ms half sine (Sensor)
Sensor Weight: 5.0g (Sensor without cable)
Cable: Double Shield. Maximum length 2m. Diameter: 3.6mm (0.142”)
Flex Life: 20 x 106 cycles @ 20mm bending radius
SENSOR MTG. SURFACE
A
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
6. SmartPrecisionTM
Electronics Module
The Mercury 3000 encoder system includes a SmartPrecision
electronics module. This compact, fully-featured signal processing
system performs the following functions:
• Interpolation - up to 1024X with 28.8 million quadrature states / sec.
• Programmable interpolation level and output bandwidth
• Accuracy optimization - sensor signals are automatically optimized
to improve system accuracy and maximize repeatability
• Signal strength indication - red / yellow / green LEDs assist during
setup and provide diagnostics at a glance
• Index centering - centers the bi-directional index output pulse for
repeatability to +/-1LSB
• Low Signal/Over Speed alarm
• Power-indicating LED
• Computer interface - for programming and data acquisition using
SmartPrecision software
• Superior EMI / RFI immunity - CE compliant
• Mounting options - all electronics are within the EMI-shielded
connector housing and can be screwed directly into a mating
connector that is bulkhead mounted, or the module may be mounted
to the frame of your motion system and connected using an
extension cable
Programmable Interpolation
The electronics module has programmable interpolation that is
selectable over the range x4 to x1024 in integer steps, providing
output resolutions that can be matched to your application
requirements. This feature provides linear resolutions from 5μm to
0.020μm in convenient increments (e.g. x200 interpolation = 0.1μm)
and rotary resolutions from 6,600 CPR to 16.8M CPR. Specify the
interpolation value at the time of ordering or select the interpolation at
your site using SmartPrecision Software.
Programmable Maximum Output Frequency
For encoder applications combining high resolution and high speed,
the SmartPrecision electronics module supports up to 28.8 million
quadrature state changes per second**. By specifying the maximum
output frequency to match your controller's capability - ranging from
900,000 up to 28.8 million quadrature state changes per second - the
Mercury encoder system will never produce encoder counts faster than
your controller can read them. Specify the encoder’s maximum output
frequency at the time of ordering or select the setting at your site
using MicroE's SmartPrecision Software.
* The electronics module’s serial computer programming interface can be translated to be RS-232
compatible using the MicroE SmartPrecision Computer Interface Adapter or a voltage translation
circuit of your own design.
** “Quadrature state changes per second" is the reciprocal of "dwell time" or "edge separation". For
example, 28.8 million states per second = 0.035μsec dwell time.
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
SmartPrecision module enclosure provides “Best-in-Class”
noise immunity for high noise environments.
Mercury 3000 Outputs:
15-pin high density Male D-sub connector
PIN FUNCTION
1 Reserved - Do not connect
2 Serial programming interface -transmit*
3 Serial programming interface -receive*
4 A- quadrature
5 A+ quadrature
6 Reserved - Do not connect
7 Reserved - Do not connect
8 Reserved - Do not connect
9 B- quadrature
10 B+ quadrature
11 Alarm
12 +5VDC
13 Ground
14 I+ index
15 I- index
Page 6 of 10
All Specifications are subject to change. All data is accurate to the best of our knowledge.
MicroE Systems is not responsible for errors.
Note: Contact MicroE for pin assignments and software
protocols for the high speed serial output version.
7. Mechanical Information - electronics module
Sold & Serviced By:
Page 7 of 10
.75 [19.1]
2.03 [51.5]
2.18 [55.4]
1.89 [48.0]
1.50 [38.1]
Ø.13 [Ø3.3]
2.11 [53.5]
.10 [2.4]
.85 [21.5]
.46 [11.6]
PIN 1 PIN 5
PIN 10 PIN 15
Male D-sub connector
Maximum Quadrature Output Frequency
Output Frequency A-quad-B Output Rate Dwell Time (or edge separation)
7.2MHz 28.8M quadrature states / sec 0.035μsec
3.6MHz 14.4M quadrature states / sec 0.069μsec
1.8MHz 7.2M quadrature states / sec 0.139μsec
900kHz 3.6M quadrature states / sec 0.278μsec
450kHz 1.8M quadrature states / sec 0.555μsec
225kHz 900k quadrature states / sec 1.111μsec
All Specifications are subject to change. All data is accurate to the best of our knowledge.
MicroE Systems is not responsible for errors.
Signal Termination for
A-Quad-B and Index
Mercury
3000
encoder
120
Ω
Cable Zo=120Ω
Customer
Electronics
Output Signals
A+
B+
I+
Pins 4 & 5
Pins 9 & 10
Pins 14 & 15*
Quadrature TTL
*Note: The index pulse may be aligned with A- or B- at some interpolation values.
11
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
8. Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Page 8 of 10
SmartPrecision Software for
Mercury 2000 and 3000 Encoder Systems
All Specifications are subject to change. All data is accurate to the best of our knowledge.
MicroE Systems is not responsible for errors.
SmartPrecision Software
makes Mercury the
industry’s easiest to use
encoder. It helps you
program, set up, use,
and diagnose Mercury
2000 and 3000 encoders
with the click of a
mouse. Compatible with
Windows 95, 98, ME,
NT, 2000, and XP.
Program Mercury Encoder Electronics
• Set interpolation in integer steps from x4 to x256 (Mercury 2000)
or x4 to x1024 (Mercury 3000)
• Set maximum output frequency to match your controller
Install Mercury Encoder System
• Align sensor using Signal Level display and Encoder Signal data plot
• Locate index and see when sensor is over the scale’s index mark
• Verify sensor output over length of scale using the Signal Strength plot
Monitor Mercury Encoder Operation
• Read encoder position in engineering units of your choice
• Read the encoder's hour meter to monitor system usage
• Capture alarms while system operates unattended
Diagnose Mercury Encoder Performance
• Capture signal data and email it to MicroE for rapid diagnostic support
• Monitor alarms, view the alarm history log
System Description
The SmartPrecision Software system includes Software on CD, a
computer interface adapter, computer cable, and a power adapter.
The encoder signal plot, or Lissajous plot, reveals the underlying strength
and uniformity of the sensor’s output.
How to Order SmartPrecision Software
To Purchase the SmartPrecision Software system, use this Model
Number: SSWA120 for 120 VAC, 60Hz US Standard 2-prong plug
or SSWA220 for 220 VAC, 50 Hz European Std. 2-prong plug
9. Scale Specifications
Standard and Customized Scales
Sold & Serviced By:
MicroE Systems offers a wide array of chrome on glass scales for the highest accuracy and best thermal stability. Easy to install, standard
linear and rotary scales meet most application requirements. Customized linear, rotary, and rotary segment scales are available where need-ed.
All scales include an optical index. Mercury's glass scales save time by eliminating motion system calibrations or linearity corrections
required by other encoders, and provide better thermal stability than metal tape scales.
Options include:
• Standard linear: 18mm - 2m
• Standard rotary: 12mm - 107.95mm diameter, with or without hubs
• Custom linear*: special lengths, widths, thickness, index mark locations and special low CTE materials
• Custom rotary*: special ID's, OD's (up to 304.8mm), index mark outside the main track and special low CTE materials
• Mounting of hubs for rotary scales: MicroE Systems can mount and align standard, custom, or customer-supplied hubs
• Rotary segments*: any angle range; wide range of radius values
*Custom scales or rotary segments are available in OEM quantities. Contact your local MicroE Systems sales office.
Standard Short Linear Scales
130mm and Shorter
Key: inches[mm]
Measured Length
is always 5 mm less
then total length
Scale Length
Center Index
0.250 [6.35]
Model L18 L30 L55 L80 L105 L130
Scale Length 0.709 [18] 1.181 [30] 2.165 [55] 3.150 [80] 4.134 [105] 5.118 [130]
Measured Length 0.512 [13] 0.984 [25] 1.969 [50] 2.953 [75] 3.937 [100] 4.921 [125]
Scale Length
Custom scales available
All Specifications are subject to change. All data is accurate to the best of our knowledge.
MicroE Systems is not responsible for errors.
Specifications
Accuracy ±3μm standard
±1μm available
Material Soda lime glass
Typical CTE 8ppm/°C
Index Center or End
Specifications
Accuracy ±5 μm <1m
±5 μm/m >1m
Material Soda lime glass
Typical CTE 8ppm/°C
Index Center or End
Standard Long Linear Scales
155mm and Longer
Key: inches[mm]
Measured Length
is always 5 mm less
then total length
0.098 [2.5]
0.787 [20.00]
End Index Center Index
0.036 [0.9]
End Index
Model L155 L225 L325 L425 L525 L1025 L2025
Scale length 6.102 [155] 8.858 [225] 12.795 [325] 16.732 [425] 20.669 [525] 40.354 [1025] 79.724 [2025]
Measured length 5.906 [150] 8.661 [220] 12.598 [320] 16.535 [420] 20.472 [520] 40.157 [1020] 79.528 [2020]
Custom scales available
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
10. SCALE O.D.
HUB I.D.
OPTICAL DIAMETER
Standard Rotary Scales
HUB THICKNESS
SCALE
PATTERN
MOUNTING
HOLES
Sold & Serviced By:
Specifications
Material Soda lime glass
Typical CTE 8ppm/°C
Key: inches[mm]
Model No. Scale Outer Scale Inner Optical Hub Inner Hub Fundamental
Diameter Diameter Diameter Diameter Thickness CPR
How to Order Mercury 3000 Encoder Systems
To specify your Mercury encoder with the desired scale, level of interpolation, maximum output frequency, cable length
and software, consult the chart below to create the correct part number for your order. Call MicroE Systems’ Rapid
Customer Response team for more information [508] 903-5000.
Example (Linear Encoder): M3000-M10-1024-1-L55-C1
Example (Rotary Encoder): M3000-M10-1024-1-R1910-HA
- - - -
How to Order SmartPrecision Software
SmartPrecision Software
SSWA120 for 120 VAC, 60Hz
US Standard 2-prong plug
* 3 clamps for linear scales up to 130mm
** 10 clamps for linear scales 155mm or longer
All Specifications are subject to change. All data is accu-rate
to the best of our knowledge. MicroE Systems is not
responsible for errors.
or
SSWA220 for 220 VAC,
50 Hz European Std. 2-prong plug
Scale Mounting
For linear scales:
T = Tape mounting
C1 = 3 scale clamps*
C2 = 10 scale clamps**
Hubs for Rotary Scales:
NH = Without Hub
HE = for R1206
HA = for R1910
HB = for R3213
HC = for R5725
HD = for R10851
Scale Model
Lxxx or Rxxxx
Interpolation
4 = 4x
5 = 5x
1024 = 1024x
Cable Length
M05 = 0.5 m
M10 = 1.0 m
M20 = 2.0 m
M3000 -
Maximum Output
Frequency
1 = 7.2 MHz
2 = 3.6 MHz
3 = 1.8 MHz
4 = 900 kHz
5 = 450 kHz
6 = 225 kHz
+.0005/-0.0000
R1206 0.472 [12.00] 0.250 [6.35] 0.413 [10.50] 0.1253 [3.18] 0.040 [1.02] 1650
R1910 0.750 [19.05] 0.375 [9.52] 0.627 [15.92] 0.1253 [3.183] 0.040 [1.02] 2500
R3213 1.250 [31.75] 0.500 [12.70] 1.027 [26.08] 0.2503 [6.358] 0.050 [1.27] 4096
R5725 2.250 [57.15] 1.000 [25.40] 2.053 [52.15] 0.5003 [12.708] 0.060 [1.52] 8192
R10851 4.250 [107.95] 2.000 [50.80] 4.106 [104.30] 1.0003 [25.408] 0.080 [2.03] 16384
Custom scales available
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com