Avnet provides commercial interconnect and custom cable assembly services. They have invested in robotic automation and maintain high quality standards to minimize errors and ensure same-day delivery. Avnet can assemble a variety of interconnect components and cable types based on manufacturer specifications and customer requirements. All assemblies are electrically tested using specialized equipment to ensure quality.

1. Avnet Service Brief
Commercial Interconnect Assembly
Commercial interconnect value-add products are built and inventoried
based on manufacturer listed part numbers. Likewise, assembly methods
and part specifications are based on catalog drawings provided by
the manufacturers.
n
Amphenol
n
n
n
n
n
ITT Interconnect Solutions
n
n
n
Value-Add Services
n
Molex
Avnet maintains an industry-leading low defect rate and adheres to the
highest quality standards. These productivity and quality standards,
coupled with a $60 million inventory investment, ensure same-day, to a
maximum of three-day, delivery.
Cylindrical Connectors
n
FCI
Contacts
Headers
n
3M Interconnect Solutions
D-Sub
Connectors
Manufacturers
& Services
Cylindrical
Connectors
Avnet Electronics Marketing has invested in robotic automation for part
identification, adhesive application, contact insertion and insulator insertion, which is deployed to minimize human error, increase productivity and
maintain cost efficiencies.
Samtec
TE Connectivity
n
>> Contact,
n
n
n
n
n
n
>> Shell
polarizing pin and key installation
or barrel modification
>> Hardware
installation
D-Subminiature Connectors
Commercial interconnect assembly services are performed at
the Avnet Logistics Solution Center (LSC).
>> Contact,
>> Rivet
polarizing pin and key installation
and clinch nut installation
>> Hardware
>> Located
in Nogales, Mexico
square foot assembly center
>> Staffed by more than 300 employees
>> Certification and compliance credentials:
- ISO-9001-2000
- ISO-14001 (Green)
- AS9100C
- MIL-I-45208
- International Traffic in Arms Regulations (ITAR)
- C-TPAT
- IPC J-STD-001 and IPC/WHMA-A-620
- UL and CSA
- British Standards Institute (BSI)
>> 125,000
>> Load
installation
contact installation
Headers
>> Contact
>> Pin
and dye insulator removal
strip headers cut down from strips/reels
>> Ejection
latch additions and unshrouded header wall additions
Contacts
>> Male,
female, wire wrap and printed circuit tails
cut from reel to bulk
Contact
For more information about commercial interconnect
assembly services available from Avnet, call 1-800-332-8638
or contact your local Avnet representative.
www.em.avnet.com
1-800-332-8638
AEM/CommInterconnectSB/08-13
© Avnet, Inc. 2013. AVNET and the AV logo are registered trademarks of Avnet, Inc. All other brands are the property of their respective owners.

2. Avnet Service Brief
Custom Cable Assembly
Amphenol
FCI
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
All units are built to customer specifications and electrically tested using
state-of-the-art test equipment. When required, special test boards
are manufactured on site with mating connectors and headers so that
any connector used on the custom assembly can be tested. A 100%
electrical test is performed on each assembly whenever possible.
Custom Cable Assembly Capabilities
>> Flat
flex assemblies
>> Flat
ribbon cable connector assemblies
>> IDC
n
Panduit
TE Connectivity
n
n
n
ITT Interconnect Solutions
Molex
Ties, Labels &
Accessories
n
Discrete & MultiConductor
n
RF Coax
IDC Term. –
High-Density
3M Interconnect Solutions
IDC Termination –
.100/.156
n
Flat Flex/Flex
Manufacturers
& Services
Flat Ribbon IDC
Avnet’s ability to meet customer specifications of varying levels of
sophistication yielded more than six million flat flex, flat ribbon cable
connector and harness assemblies last year alone. Avnet has a dedicated
production cell that assembles first article cables based on customer
specifications. Upon approval, Avnet documents and electronically
stores the manufacturing process, which includes detailed step-by-step
assembly instructions that can be recalled for future use.
n
n
n
Custom cable assembly services are performed at the Avnet
Logistics Solution Center (LSC).
>> Located
in Nogales, Mexico
square foot assembly center
>> Staffed by more than 300 employees
>> Certification and compliance credentials:
- ISO-9001-2000
- ISO-14001 (Green)
- AS9100C
- MIL-I-45208
- International Traffic in Arms Regulations (ITAR)
- C-TPAT
- IPC J-STD-001 and IPC/WHMA-A-620
- UL and CSA
- British Standards Institute (BSI)
terminal connections using .100 and .156 centerline
connectors for discrete wires or notched cable
>> High-density
>> Modifications
to cables such as zipping, stripping,
soldering, folding/bending and labeling
>> Discrete
and multi-conductor assemblies, which
include some or all of these operations:
> Crimp
>> 125,000
D and ribbon D style connectors
and poke
> Soldering
> Labeling
> IDC
termination
> Applying
>> Coax
heat shrink, phone plugs, twisting/pairing and tie wraps
assemblies for single and double conductor flexible cable
>> First
Article cable assemblies based on customer specifications;
once approved, Avnet electronically documents the assembly
process to be followed for future builds
Contact Information
For more information about custom cable assembly services
available from Avnet, call 1-800-332-8638 or contact your
local Avnet representative.
www.em.avnet.com
1-800-332-8638
AEM/CustomCableAssemblySB/08-13
© Avnet, Inc. 2013. AVNET and the AV logo are registered trademarks of Avnet, Inc. All other brands are the property of their respective owners.