The document provides specifications for the DigiFlex® PerformanceTM Servo Drive DPCANTE-060B080. It is a digital servo drive designed to drive brushed and brushless motors in torque, velocity or position mode. Key features include a CANopen interface, configurable I/O, and compliance with various safety standards. It has a peak current of 60A, continuous current of 30A, and supply voltage range of 20-80VDC.
Sacan 40 toneladas de basura de ríos Mantaro y YauliDoe Run Perú SRL
"Casi 2000 voluntarios recogieron 40 toneladas de residuos sólidos de todo tipo en las márgenes de los ríos Mantaro y Yauli. Tras desplazarse 16 Km de los sectores en los distritos de La Oroya Sacco y Paccha provistos de bolsas de plásticos y guantes quirúrgicos.
Durante la actividad programa por La empresa Doe Run Perú y la ONG Vida se encontró gran cantidad de material de plástico, teknopor, desechos de construcción y basura en general."
Titular: Sacan 40 toneladas de basura de ríos Mantaro y Yauli
Fecha: 09/11/13
Fuente: Correo
Monetary Policy and Economic Performance in Resource Dependent Economies - Ba...Economic Research Forum
Bassem Kamar, International University of Monaco
ERF and AFESD Conference
Monetary and Fiscal Institutions in Resource-Rich Arab Economies
Kuwait, November 4-5, 2015
For more info, please visit www.erf.org.eg
Session on: Resource Abundance, Fiscal Dominance and Monetary Outcomes
While monetary policy could play a key role in fostering economic growth and short-term stabilization, its implementation in oil rich economies is often complicated by commodity price volatility. This session explores the role of alternative monetary policy regimes on economic performance in resource-based economies, with a particular focus on Arab economies. It also examines the interdependence between fiscal and monetary policies in resource-dependent economies, in particular the fiscal drivers of the choice of the exchange rate regime.
GCC Currency Union: Necessary Precursors and Prospects - Emilie J. RutledgeEconomic Research Forum
Emilie J. Rutledge, United Arab Emirates University
ERF and AFESD conference on: Monetary and Fiscal Institutions in Resource-Rich Arab Economies
Kuwait, November 4-5, 2015
For more info, please visit www.erf.org.eg
Session on: Central Bank Independence and Institutional Reforms
Optimal monetary policy response to commodity price shocks requires the presence of credible and strong institutions, which are often absent in resource-rich Arab economies. It also requires clarity about central bank versus government objectives and clear institutional arrangements about the role of each. Among the ways to achieve credibility and instill a clear division of policy responsibilities is to promote central bank independence (CBI). This section aims to examine the independence of monetary institutions in several Arab resource-rich economies as well as other institutional reform required for an effective and well-functioning GCC currency union.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
Advanced motion controls dpcante 060b080
1. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
Description
Power Range
The DigiFlex® Performance™ (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital drives operate in torque, velocity, or position mode and employ Space Vector Modulation (SVM), which results in higher bus voltage utilization and reduced heat dissipation compared to traditional PWM. The drive can be configured for a variety of external command signals. Commands can also be configured using the drive’s built-in Motion Engine, an internal motion controller used with distributed motion applications. In addition to motor control, these drives feature dedicated and programmable digital and analog inputs and outputs to enhance interfacing with external controllers and devices.
This DP Series drive features a CANopen interface for networking and a RS-232 interface for drive configuration and setup. Drive commissioning is accomplished using DriveWare® 7, available for download at www.a-m-c.com.
All drive and motor parameters are stored in non- volatile memory.
Peak Current 60 A (42.4 ARMS)
Continuous Current 30 A (30 ARMS)
Supply Voltage 20 - 80 VDC
Features
Four Quadrant Regenerative Operation
Space Vector Modulation (SVM) Technology
Fully Digital State-of-the-art Design
Programmable Gain Settings
Fully Configurable Current, Voltage, Velocity and Position Limits
PIDF Velocity Loop
PID + FF Position Loop
Compact Size, High Power Density
16-bit Analog to Digital Hardware
On-the-Fly Mode Switching
On-the-Fly Gain Set Switching
MODES OF OPERATION
Profile Current
Profile Velocity
Profile Position
Cyclic Synchronous Current Mode
Cyclic Synchronous Velocity Mode
Cyclic Synchronous Position Mode
COMMAND SOURCE
±10 V Analog
PWM and Direction
Encoder Following
Over the Network
Sequencing
Indexing
Jogging
FEEDBACK SUPPORTED
±10 VDC Position
Halls
Incremental Encoder
Auxiliary Incremental Encoder
Tachometer (±10 VDC)
INPUTS/OUTPUTS
3 High Speed Captures
3 Programmable Analog Inputs (16-bit/12-bit Resolution)
2 Programmable Analog Outputs (10-bit Resolution)
2 Programmable Digital Inputs (Differential)
6 Programmable Digital Inputs (Single-Ended)
4 Programmable Digital Outputs (Single-Ended)
COMPLIANCES & AGENCY APPROVALS
UL
cUL
CE Class A (LVD)
CE Class A (EMC)
RoHS
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
2. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
BLOCK DIAGRAM
PAI-1 + (REF+) PAI-1 – (REF–) PAO-1,2PDI-1,2,3,4 (CAP-A),5,6SGN GNDCAN_HCAN_L I/InterfaceI/O Interface DriveLogicCANopenInterfaceCONTROL MODULECAN_GNDPDO-1,2,3,4SGN GND5k+5V5k+5V10k+5V10k5k+5V20k20k20kPAI-2,3SGN GND10kRS232 RXRS232 TXISO GNDPAI-2: 33kPAI-3: 500k Motor FeedbackMotor Feedback MOT ENC A,B,I + MOT ENC A,B,I – HALL A,B,C + HALL A,B,C – 10k+5V20k+5V20k+5V10k+5V10k5kPDI-7,8 + (PWM+ / DIR+ / AUX ENC A,B + / CAP-B,C+) PDI-7,8 – (PWM– / DIR– /AUX ENC A,B – / CAP-B,C –) RS-232InterfacePWR GNDMOTOR AMOTOR BMOTOR CHIGH VOLTAGEPOWER MODULEPower StageLogic PowerLOGIC POWER
Information on Approvals and Compliances
US and Canadian safety compliance with UL 508c, the industrial standard for power conversion electronics. UL registered under file number E140173. Note that machine components compliant with UL are considered UL registered as opposed to UL listed as would be the case for commercial products.
Compliant with European CE for both the Class A EMC Directive 2004/108/EC on Electromagnetic Compatibility (specifically EN 61000-6-4:2007 and EN 61000-6-2:2005) and LVD requirements of directive 2006/95/EC (specifically EN 60204-1:2006), a low voltage directive to protect users from electrical shock.
RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
3. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
SPECIFICATIONS
Power Specifications
Description
Units
Value
DC Supply Voltage Range
VDC
20 - 80
DC Bus Over Voltage Limit
VDC
88.7
DC Bus Under Voltage Limit
VDC
17.5
Logic Supply Voltage
VDC
20 - 80
Maximum Peak Output Current1
A (Arms)
60 (42.4)
Maximum Continuous Output Current2
A (Arms)
30 (30)
Maximum Continuous Output Power
W
2280
Maximum Power Dissipation at Continuous Current
W
120
Internal Bus Capacitance
μF
500
Minimum Load Inductance (Line-To-Line)3
μH
250 (at 80 V supply); 150 (at 48 V supply); 75 (at 24 V supply)
Switching Frequency
kHz
20
Maximum Output PWM Duty Cycle
%
100
Low Voltage Supply Outputs
-
+5 VDC (250 mA)
Control Specifications
Description
Units
Value
Communication Interfaces
-
CANopen (RS-232 for configuration)
Command Sources
-
±10 V Analog, Encoder Following, Over the Network, PWM and Direction, Sequencing, Indexing, Jogging
Feedback Supported
-
±10 VDC Position, Auxiliary Incremental Encoder, Halls, Incremental Encoder, Tachometer (±10 VDC)
Commutation Methods
-
Sinusoidal, Trapezoidal
Modes of Operation
-
Profile Current, Profile Velocity, Profile Position, Cyclic Synchronous Current Mode, Cyclic Synchronous Velocity Mode, Cyclic Synchronous Position Mode
Motors Supported
-
Closed Loop Vector, Single Phase (Brushed, Voice Coil, Inductive Load), Three Phase (Brushless)
Hardware Protection
-
40+ Configurable Functions, Over Current, Over Temperature (Drive & Motor), Over Voltage, Short Circuit (Phase-Phase & Phase-Ground), Under Voltage
Programmable Digital Inputs/Outputs (PDIs/PDOs)
-
8/4
Programmable Analog Inputs/Outputs (PAIs/PAOs)
-
3/2
Primary I/O Logic Level
-
5V TTL
Current Loop Sample Time
μs
50
Velocity Loop Sample Time
μs
100
Position Loop Sample Time
μs
100
Maximum Encoder Frequency
MHz
20 (5 pre-quadrature)
Mechanical Specifications
Description
Units
Value
Agency Approvals
-
CE Class A (EMC), CE Class A (LVD), cUL, RoHS, UL
Size (H x W x D)
mm (in)
190.5 x 111.8 x 35.9 (7.5 x 4.4 x 1.4)
Weight
g (oz)
872 (30.8)
Heatsink (Base) Temperature Range4
°C (°F)
0 - 75 (32 - 167)
Storage Temperature Range
°C (°F)
-40 - 85 (-40 - 185)
Form Factor
-
Panel Mount
Cooling System
-
Natural Convection
IP Rating
-
IP10
AUX COMM Connector
-
3-pin, 2.5 mm spaced, enclosed, friction lock header
COMM Connector
-
Shielded, dual RJ-45 socket with LEDs
FEEDBACK Connector
-
15-pin, high-density, female D-sub
I/O Connector
-
26-pin, high-density, female D-sub
MOTOR POWER Connector
-
3-port, 7.62 mm spaced, enclosed, friction lock header
POWER Connector
-
4-port, 7.62 mm spaced, enclosed, friction lock header
Notes
1. Capable of supplying drive rated peak current for 2 seconds with 10 second foldback to continuous value. Longer times are possible with lower current limits.
2. Continuous Arms value attainable when RMS Charge-Based Limiting is used.
3. Lower inductance is acceptable for bus voltages well below maximum. Use external inductance to meet requirements.
4. Additional cooling and/or heatsink may be required to achieve rated performance.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
4. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
PIN FUNCTIONS
AUX COMM - RS232 Communication Connector
Pin
Name
Description / Notes
I/O
1
RS232 RX
Receive Line (RS-232)
I
2
RS232 TX
Transmit Line (RS-232)
O
3
ISO GND
Isolated Signal Ground
IGND
COMM - CAN Communication Connector
Pin
Name
Description / Notes
I/O
1
CAN_H
CAN_H Line (Dominant High)
I
2
CAN_L
CAN _L Line (Dominant Low)
I
3
CAN_GND
CAN Ground
CGND
4
RESERVED
Reserved
-
5
RESERVED
Reserved
-
6
RESERVED
Reserved
-
7
CAN_GND
CAN Ground
CGND
8
RESERVED
Reserved
-
FEEDBACK - Feedback Connector
Pin
Name
Description / Notes
I/O
1
HALL A+
Commutation Sensor Inputs
I
2
HALL B+
I
3
HALL C+
I
4
MOT ENC A+
Differential Encoder A Channel Input (For Single Ended Signals Use Only The Positive Input)
I
5
MOT ENC A-
I
6
MOT ENC B+
Differential Encoder B Channel Input (For Single Ended Signals Use Only The Positive Input)
I
7
MOT ENC B-
I
8
MOT ENC I+
Differential Encoder Index Input (For Single Ended Signals Use Only The Positive Input)
I
9
MOT ENC I-
I
10
HALL A-
Commutation Sensor Input (For Differential Signals Only)
I
11
HALL B-
Commutation Sensor Input (For Differential Signals Only)
I
12
SGN GND
Signal Ground
SGND
13
+5V OUT
+5V Encoder Supply Output (Short Circuit Protected)
O
14
PAI-3
Programmable Analog Input (12-bit Resolution)
I
15
HALL C-
Commutation Sensor Input (For Differential Signals Only)
I ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
5. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
I/O - Signal Connector
Pin
Name
Description / Notes
I/O
1
PDO-1
Programmable Digital Output
O
2
SGN GND
Signal Ground
SGND
3
PDO-2
Programmable Digital Output
O
4
PAI-1 + (REF+)
Differential Programmable Analog Input or Reference Signal Input (16-bit Resolution)
I
5
PAI-1 - (REF-)
I
6
PAI-2
Programmable Analog Input (12-bit Resolution)
I
7
PAO-1
Programmable Analog Output (10-bit Resolution)
O
8
PAO-2
Programmable Analog Output (10-bit Resolution)
O
9
PDI-8 - (DIR- / AUX ENC B- / CAP-C-)
Programmable Digital Input or Direction or Auxiliary Encoder or High Speed Capture (Leave Open for Single-Ended Signal)
I
10
PDO-3
Programmable Digital Output
O
11
PDI-1
Programmable Digital Input
I
12
PDI-2
Programmable Digital Input
I
13
PDI-3
Programmable Digital Input
I
14
PDO-4
Programmable Digital Output
O
15
+5V OUT
+5V Encoder Supply Output (Short Circuit Protected)
O
16
SGN GND
Signal Ground
SGND
17
PDI-7 + (PWM + / AUX ENC A+ / CAP- B+)
Programmable Digital Input or PWM or Auxiliary Encoder or High Speed Capture
I
18
PDI-8 + (DIR+ / AUX ENC B+ / CAP-C+)
Programmable Digital Input or Direction or Auxiliary Encoder or High Speed Capture
I
19
PDI-4 (CAP-A)
Programmable Digital Input or High Speed Capture
I
20
PDI-5
Programmable Digital Input
I
21
PDI-6
Programmable Digital Input
I
22
SGN GND
Signal Ground
SGND
23
RESERVED
Reserved
-
24
RESERVED
Reserved
-
25
RESERVED
Reserved
-
26
PDI-7 - (PWM- / AUX ENC A- / CAP-B-)
Programmable Digital Input or PWM or Auxiliary Encoder or High Speed Capture (Leave Open for Single-Ended Signals)
I
MOTOR POWER - Power Connector
Pin
Name
Description / Notes
I/O
1
MOTOR A
Motor Phase A
O
2
MOTOR B
Motor Phase B
O
3
MOTOR C
Motor Phase C
O
POWER - Power Connector
Pin
Name
Description / Notes
I/O
1
PWR GND
Power Ground (Common With Signal Ground)
PGND
2
HIGH VOLTAGE
DC Power Input
I
3
LOGIC GND
Logic Supply Ground (Common With Signal Ground)
GND
4
LOGIC PWR
Logic Supply Input
I ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
6. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
HARDWARE SETTINGS
Switch Functions
Switch
Description
Setting
On
Off
1
Bit 0 of binary CANopen node ID. Does not affect RS-232 settings.
1
0
2
Bit 1 of binary CANopen node ID. Does not affect RS-232 settings.
1
0
3
Bit 2 of binary CANopen node ID. Does not affect RS-232 settings.
1
0
4
Bit 3 of binary CANopen node ID. Does not affect RS-232 settings.
1
0
5
Bit 4 of binary CANopen node ID. Does not affect RS-232 settings.
1
0
6
Bit 5 of binary CANopen node ID. Does not affect RS-232 settings.
1
0
7
Bit 0 of drive CANopen bit rate setting. Does not affect RS-232 settings.
1
0
8
Bit 1 of drive CANopen bit rate setting. Does not affect RS-232 settings.
1
0
Additional Details
The drive can be configured to use the address and/or bit rate stored in non-volatile memory by setting the address and/or bit rate value to 0. Use the table below to map actual bit rates to a bit rate setting.
Bit Rate (kbits/sec)
Value For Bit Rate Setting
Load from non-volatile memory
0
500
1
250
2
125
3
Jumper Settings
Jumper
Description
Configuration
Header Jumper
Not Installed
Pins 1-2
Pins 2-3
J1
CAN bus termination. Install this jumper (2.54mm) on the last drive in a CAN network. This jumper is located on a 4-pin header adjacent to the RS-232 connector. It consists of the two pins furthest from the connector.
Non- terminating Node
Terminating Node
N/A
J2
Reserved.
-
-
N/A
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
7. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
MECHANICAL INFORMATION
AUX COMM - RS232 Communication Connector
Connector Information
3-pin, 2.5 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix: Plug P/N 1881338
Included with Drive
Yes
RS232 RX1RS232 TX2ISO GND3
COMM - CAN Communication Connector
Connector Information
Shielded, dual RJ-45 socket with LEDs
Mating Connector
Details
AMP: Plug P/N 5-569552-3
Included with Drive
No
CAN_H1CAN_L2CAN_GND3CAN_GND7CAN_H1CAN_L2CAN_GND3CAN_GND7AB
FEEDBACK - Feedback Connector
Connector Information
15-pin, high-density, female D-sub
Mating Connector
Details
TYCO: Plug P/N 748364-1; Housing P/N 5748677-1; Terminals P/N 1658670-2 (loose) or 1658670-1 (strip)
Included with Drive
No
HALL A+1HALL B+2HALL C+3MOT ENC A+4MOT ENC A-5HALL B-11SGN GND12+5V OUT13PAI-314HALL C-15MOT ENC B+6HALL A-10MOT ENC B-7MOT ENC I+8MOT ENC I-9
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
8. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
I/O - Signal Connector
Connector Information
26-pin, high-density, female D-sub
Mating Connector
Details
TYCO: Plug P/N 1658671-1; Housing P/N 5748677-2; Terminals P/N 1658670-2 (loose) or 1658670-1 (strip)
Included with Drive
No
PDO-1123456897PDO-414PDI-111PDI-212PDI-313PDO-310+5V OUT15PDI-7 + (PWM + / AUX ENC A+ / CAP-B+)17PDI-8 + (DIR+ / AUX ENC B+ / CAP-C+)18SGN GND16SGN GNDPDI-8 - (DIR- / AUX ENC B- / CAP-C-) PAO-2PAO-1PAI-2PAI-1 - (REF-) PAI-1 + (REF+) PDO-2PDI-4 (CAP-A)19SGN GND22PDI-520PDI-621PDI-7 - (PWM- / AUX ENC A- / CAP-B-)26
MOTOR POWER - Power Connector
Connector Information
3-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804917
Included with Drive
Yes
MOTOR A1MOTOR B2MOTOR C3
POWER - Power Connector
Connector Information
4-port, 7.62 mm spaced, enclosed, friction lock header
Mating Connector
Details
Phoenix Contact: P/N 1804920
Included with Drive
Yes
PWR GND1HIGH VOLTAGE2LOGIC GND3LOGIC PWR4
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
10. DigiFlex® Performance™ Servo Drive DPCANTE-060B080
PART NUMBERING INFORMATION
- Drive SeriesDigiFlex PerformanceCommunicationCommand InputsCPDTNAE060B080Example: DPRS232/RS485RCANopen or RS232CEthernet Powerlink or TCP/IPPAnalog (±10V) No Step & DirectionANAnalog (±10V) Low Voltage Step & Direction (5V)ALAnalog (±10V) High Voltage Step & Direction (24V)AHNo AnalogLow Voltage Step & Direction (5V)NLNo Analog, No Step & Direction(Communication Interface Only)NNDigital I/OIsolated (24V)ITTL (5V) Non-IsolatedTMotor FeedbackIncremental Encoder and/or HallsEResolverRAbsolute Sin/Cos (Hiperface & Endat)ASin/Cos with HallsSMax DC Bus Voltage (VDC) 80080200200400400800800AC Input+24VDC User Logic Supply RequiredAAC Input Single Phase Only+24VDC User Logic Supply RequiredSDC InputBoth Logic Supply Options (Internal or User)BDC InputLogic Supply RequiredL15015160162002025025300304004060C060100C100- Code used to identify customer specialsPower and Logic SupplyPeak Current (A0 to Peak) Customer SpecialEtherCATEUniversal (Halls, Inc. Enc., Abs. Enc., 1Vp-p Sin/Cos Enc.)U60060
DigiFlex® Performance™ series of products are available in many configurations. Note that not all possible part number combinations are offered as standard drives. All models listed in the selection tables of the website are readily available, standard product offerings.
ADVANCED Motion Controls also has the capability to promptly develop and deliver specified products for OEMs with volume requests. Our Applications and Engineering Departments will work closely with your design team through all stages of development in order to provide the best servo drive solution for your system. Equipped with on-site manufacturing for quick- turn customs capabilities, ADVANCED Motion Controls utilizes our years of engineering and manufacturing expertise to decrease your costs and time-to-market while increasing system quality and reliability. Feel free to contact Applications Engineering for further information and details.
Examples of Customized Products
Optimized Footprint
Tailored Project File
Private Label Software
Silkscreen Branding
OEM Specified Connectors
Optimized Base Plate
No Outer Case
Increased Current Limits
Increased Current Resolution
Increased Voltage Range
Increased Temperature Range
Conformal Coating
Custom Control Interface
Multi-Axis Configurations
Integrated System I/O
Reduced Profile Size and Weight
Available Accessories
ADVANCED Motion Controls offers a variety of accessories designed to facilitate drive integration into a servo system.
Visit www.a-m-c.com to see which accessories will assist with your application design and implementation.
Power Supplies
Shunt Regulators
Drive(s)
Filter Cards
To Motor
All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: