9.2.2percentage
โข
0 likesโข395 views
This document shows the percentage increase and decrease over time of an applied electricity signal with a time constant of T. It lists the time constant T in seconds along with the corresponding percentage that the signal has increased or decreased from the original value at that time point, with the signal reaching 100% of its maximum increase and 0% decrease after 5 seconds.
Report
Share
Report
Share
Recommended
7.2.2 R Ccircuits
The document contains a table showing the time constant T for an applied electricity system, with the percentage increase and decrease over time. As the time constant increases from 0 to 5, the percentage increase grows from 0% to 100%, while the percentage decrease shrinks from 100% to 0%.
KernTax Presentation to KCBOS on PG&E Electric Rates 100309
The document discusses PG&E's tiered residential electricity rates in Kern County, California. It notes that PG&E agreed with an analysis that the high tier 5 rates in Kern County are unfairly punishing customers and subsidizing other PG&E customers statewide. PG&E plans to file a proposal in 3 weeks with the CPUC to address the inequity and propose rate reductions before the summer. Tables show how tier 1-2 rates have failed to keep up with inflation since legislation in the 1990s distorted utility rate setting.
1.2.3coloureffects
The document discusses CRI and CCT. CRI (Color Rendering Index) measures a light source's ability to accurately render colors of various objects. CCT (Correlated Color Temperature) is a measure of the color appearance of the emitted light of a light source. Together, CRI and CCT are important metrics used to evaluate the quality and characteristics of different types of lighting.
6.3.1movingcoil
This one sentence document repeats the phrase "Applied Electrical Two" three times. It consists of three identical sentences that state the same information about an applied electrical course numbered two. The document does not provide much additional context or details beyond repeating this phrase.
3.3.3compactlamps
Advantages and disadvantages of precautions are discussed. While precautions can help prevent harm, they also create disadvantages such as inconvenience or loss of freedom. It is important to consider risks, benefits, and alternatives when determining appropriate precautions.
8.5.2divider2
This document contains calculations for voltage and current in a circuit with two resistors connected in series. It shows that the total voltage supplied is divided between the two resistors proportionally to their resistances. The calculations verify that the voltages across the individual resistors sum to the total input voltage of 12V. It also shows the total resistance is the sum of the individual resistances, and uses this to calculate the current in the circuit.
1.3.1lightingterms
This document compares the luminous efficacy of different light sources, which is a measure of how well a light source produces visible light. It shows that early incandescent lamps had an efficacy of 1.4 lumens per watt, while modern light sources like fluorescent, mercury vapor, and sodium lamps have efficacies ranging from 35 to 180 lumens per watt, with the theoretical maximum for white light being 225 lumens per watt.
Recommended
7.2.2 R Ccircuits
The document contains a table showing the time constant T for an applied electricity system, with the percentage increase and decrease over time. As the time constant increases from 0 to 5, the percentage increase grows from 0% to 100%, while the percentage decrease shrinks from 100% to 0%.
KernTax Presentation to KCBOS on PG&E Electric Rates 100309
The document discusses PG&E's tiered residential electricity rates in Kern County, California. It notes that PG&E agreed with an analysis that the high tier 5 rates in Kern County are unfairly punishing customers and subsidizing other PG&E customers statewide. PG&E plans to file a proposal in 3 weeks with the CPUC to address the inequity and propose rate reductions before the summer. Tables show how tier 1-2 rates have failed to keep up with inflation since legislation in the 1990s distorted utility rate setting.
1.2.3coloureffects
The document discusses CRI and CCT. CRI (Color Rendering Index) measures a light source's ability to accurately render colors of various objects. CCT (Correlated Color Temperature) is a measure of the color appearance of the emitted light of a light source. Together, CRI and CCT are important metrics used to evaluate the quality and characteristics of different types of lighting.
6.3.1movingcoil
This one sentence document repeats the phrase "Applied Electrical Two" three times. It consists of three identical sentences that state the same information about an applied electrical course numbered two. The document does not provide much additional context or details beyond repeating this phrase.
3.3.3compactlamps
Advantages and disadvantages of precautions are discussed. While precautions can help prevent harm, they also create disadvantages such as inconvenience or loss of freedom. It is important to consider risks, benefits, and alternatives when determining appropriate precautions.
8.5.2divider2
This document contains calculations for voltage and current in a circuit with two resistors connected in series. It shows that the total voltage supplied is divided between the two resistors proportionally to their resistances. The calculations verify that the voltages across the individual resistors sum to the total input voltage of 12V. It also shows the total resistance is the sum of the individual resistances, and uses this to calculate the current in the circuit.
1.3.1lightingterms
This document compares the luminous efficacy of different light sources, which is a measure of how well a light source produces visible light. It shows that early incandescent lamps had an efficacy of 1.4 lumens per watt, while modern light sources like fluorescent, mercury vapor, and sodium lamps have efficacies ranging from 35 to 180 lumens per watt, with the theoretical maximum for white light being 225 lumens per watt.
4.3.2emergencytypes
Maintained lighting requires ongoing maintenance and relies on a power source, while non-maintained lighting does not require maintenance or a power source and will automatically activate in an emergency. The document discusses the differences between maintained lighting that uses a continuous power source versus non-maintained emergency lighting that has its own power source and will illuminate automatically in the event of a power failure.
2.1.2wire-wound
This document discusses different types of two-wire wound resistors. It provides information on carbon composition, carbon film, metal oxide, metal film, and metal glaze resistors, including their tolerance percentages, ambient temperature ranges, maximum working voltages, minimum insulation resistances, and maximum drift percentages during storage and soldering. Standard resistor color codes and value representations are also mentioned.
192 Topic 3
This document discusses telephone transmitters and receivers, including the function of telephone transmitters to convert sound waves into electrical signals. It describes different types of microphones like carbon and digital transmitters, as well as capacitor and dynamic microphones. The document also covers types of phone receivers like rocking armature receivers and dynamic receivers.
1.4.2cosinelaw
The cosine law describes the relationship between illuminance (E), luminous intensity (l), distance from the light source (d), and the angle of incidence (ฮธ). Specifically, it states that illuminance (E) equals the luminous intensity (l) divided by the distance from the light source squared (d2), multiplied by the cosine of the angle of incidence (Cos ฮธ).
9.1.1inductance
This one sentence document repeats the phrase "Applied Electricity Two" four times. It does not provide enough contextual information to generate a multi-sentence summary.
3.3.2ballasts
The stroboscopic effect occurs when a rotating object appears to be stationary or moving at a different speed than it actually is due to intermittent illumination. This illusion happens because the human eye retains images for a fraction of a second after the image disappears. When the object is illuminated intermittently at the right intervals, the eye perceives a series of still images that appear continuous, masking the actual motion or speed of the rotating object.
8.3.5power
This document discusses power calculations in electrical circuits. It shows that total power (PT) in a circuit equals the sum of individual powers (P1 + P2 + P3...). It then calculates the power of two resistors in a circuit, which add up to 3kW total. It demonstrates that total power can be calculated from current and total resistance, or from total voltage and current. The document concludes by instructing the reader to complete review questions on power calculations.
8.3.1formula
The same current flows through each part of a series circuit. The total resistance of a series circuit is equal to the sum of individual resistances, and the voltage applied to a series circuit is equal to the sum of the individual voltage drops across each resistor. The voltage drop across a resistor in a series circuit is directly proportional to the size of that resistor.
Time Sheet
This time sheet for Joe Snow on 01/04/08 shows work hours for various jobs. It lists addresses and times for jobs at 26 Corvus St from 9-2, 716 Grey St Bris from 3-3, 852 Capt's Corner from 4-4, and 15 Tombah St from 4-4. The total hours worked was 6 hours and 30 minutes.
7.1.2symbols
This 5 sentence document repeats the phrase "Applied Electricity Two" in each sentence. It appears to be about the subject of applied electricity at a basic or introductory level, as the phrase "Applied Electricity Two" implies this could be a second course on the topic. The document does not provide much detail beyond repeating the same phrase in each sentence.
7.6.1 Magnetostriction
Magnetostriction is a property of ferromagnetic materials that causes them to change their shape or dimensions during the process of magnetization. Certain materials such as Terfenol-D experience a large change in size when placed in a magnetic field, with strains of up to 2000 parts per million being observed. This phenomenon is exploited in various applications including ultrasonic transducers, actuators, and force generators.
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
4.1.13 Light Demand 3
This short document does not provide any substantive information to summarize in 3 sentences or less. It only notes that an explanation is not contained in a workbook, but provides no other context or details.
4.1.12 Light Demand 2 Table Part2
The document outlines the demand calculations for 19 different circuit load groups across 3 phases. It lists the load description, current allowance calculation method, and resulting demand current for each phase. The total demand current per phase is calculated at the bottom, with values of 143.8 amps for phase 1, 153.25 amps for phase 2, and 145.05 amps for phase 3.
4.1.11 Light Demand 2 Table
The document contains a table that calculates the current demand per phase for various circuit load groups in an electrical system. It lists 19 load groups categorized by letters A through D, describing each load. It shows the current allowance calculation method and resulting demand in amps for each phase. The total demand current calculated per phase is 143.8 amps for L1, 153.25 amps for L2, and 145.05 amps for L3.
4.1.10 Light Demand 2
This 3 sentence document provides instructions to refer to a specific table on a specific page of a particular standard for additional explanatory information not contained in the current workbook. The instructions direct the reader to Table C2 on page 359 of AS/NZA 3000:2007 for an explanation that is not included in the current document.
4.1.9 Light Demand 1
The document describes the functions of 19 electrical circuits in a building. It lists the types of equipment connected to each circuit such as fluorescent lighting, outlets, motors, and appliances. It also indicates which of the 3 electrical phases (L1, L2, L3) each circuit is connected to.
4.1.7 Example Domestic 3
The document calculates the electrical load of communal services in an apartment building. It shows that 24 lighting points will draw 240 watts and 6 10A sockets will draw up to 12A, for a total demand of 18A per phase. The total demand current per phase for communal services is 18A.
4.1.6 Example Domestic 2
The document calculates the electrical load and demand for 6 living units per phase. It lists the types of loads in each unit, the quantity and allowance per unit, and uses this to calculate the total demand current for phases L1, L2 and L3, which is 154.4 amps for each phase. The key loads included are lighting, power outlets, cooking ranges, air conditioners and hot water systems.
More Related Content
Viewers also liked
4.3.2emergencytypes
Maintained lighting requires ongoing maintenance and relies on a power source, while non-maintained lighting does not require maintenance or a power source and will automatically activate in an emergency. The document discusses the differences between maintained lighting that uses a continuous power source versus non-maintained emergency lighting that has its own power source and will illuminate automatically in the event of a power failure.
2.1.2wire-wound
This document discusses different types of two-wire wound resistors. It provides information on carbon composition, carbon film, metal oxide, metal film, and metal glaze resistors, including their tolerance percentages, ambient temperature ranges, maximum working voltages, minimum insulation resistances, and maximum drift percentages during storage and soldering. Standard resistor color codes and value representations are also mentioned.
192 Topic 3
This document discusses telephone transmitters and receivers, including the function of telephone transmitters to convert sound waves into electrical signals. It describes different types of microphones like carbon and digital transmitters, as well as capacitor and dynamic microphones. The document also covers types of phone receivers like rocking armature receivers and dynamic receivers.
1.4.2cosinelaw
The cosine law describes the relationship between illuminance (E), luminous intensity (l), distance from the light source (d), and the angle of incidence (ฮธ). Specifically, it states that illuminance (E) equals the luminous intensity (l) divided by the distance from the light source squared (d2), multiplied by the cosine of the angle of incidence (Cos ฮธ).
9.1.1inductance
This one sentence document repeats the phrase "Applied Electricity Two" four times. It does not provide enough contextual information to generate a multi-sentence summary.
3.3.2ballasts
The stroboscopic effect occurs when a rotating object appears to be stationary or moving at a different speed than it actually is due to intermittent illumination. This illusion happens because the human eye retains images for a fraction of a second after the image disappears. When the object is illuminated intermittently at the right intervals, the eye perceives a series of still images that appear continuous, masking the actual motion or speed of the rotating object.
8.3.5power
This document discusses power calculations in electrical circuits. It shows that total power (PT) in a circuit equals the sum of individual powers (P1 + P2 + P3...). It then calculates the power of two resistors in a circuit, which add up to 3kW total. It demonstrates that total power can be calculated from current and total resistance, or from total voltage and current. The document concludes by instructing the reader to complete review questions on power calculations.
8.3.1formula
The same current flows through each part of a series circuit. The total resistance of a series circuit is equal to the sum of individual resistances, and the voltage applied to a series circuit is equal to the sum of the individual voltage drops across each resistor. The voltage drop across a resistor in a series circuit is directly proportional to the size of that resistor.
Time Sheet
This time sheet for Joe Snow on 01/04/08 shows work hours for various jobs. It lists addresses and times for jobs at 26 Corvus St from 9-2, 716 Grey St Bris from 3-3, 852 Capt's Corner from 4-4, and 15 Tombah St from 4-4. The total hours worked was 6 hours and 30 minutes.
7.1.2symbols
This 5 sentence document repeats the phrase "Applied Electricity Two" in each sentence. It appears to be about the subject of applied electricity at a basic or introductory level, as the phrase "Applied Electricity Two" implies this could be a second course on the topic. The document does not provide much detail beyond repeating the same phrase in each sentence.
7.6.1 Magnetostriction
Magnetostriction is a property of ferromagnetic materials that causes them to change their shape or dimensions during the process of magnetization. Certain materials such as Terfenol-D experience a large change in size when placed in a magnetic field, with strains of up to 2000 parts per million being observed. This phenomenon is exploited in various applications including ultrasonic transducers, actuators, and force generators.
Viewers also liked (12)
More from Talia Carbis
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
4.1.13 Light Demand 3
This short document does not provide any substantive information to summarize in 3 sentences or less. It only notes that an explanation is not contained in a workbook, but provides no other context or details.
4.1.12 Light Demand 2 Table Part2
The document outlines the demand calculations for 19 different circuit load groups across 3 phases. It lists the load description, current allowance calculation method, and resulting demand current for each phase. The total demand current per phase is calculated at the bottom, with values of 143.8 amps for phase 1, 153.25 amps for phase 2, and 145.05 amps for phase 3.
4.1.11 Light Demand 2 Table
The document contains a table that calculates the current demand per phase for various circuit load groups in an electrical system. It lists 19 load groups categorized by letters A through D, describing each load. It shows the current allowance calculation method and resulting demand in amps for each phase. The total demand current calculated per phase is 143.8 amps for L1, 153.25 amps for L2, and 145.05 amps for L3.
4.1.10 Light Demand 2
This 3 sentence document provides instructions to refer to a specific table on a specific page of a particular standard for additional explanatory information not contained in the current workbook. The instructions direct the reader to Table C2 on page 359 of AS/NZA 3000:2007 for an explanation that is not included in the current document.
4.1.9 Light Demand 1
The document describes the functions of 19 electrical circuits in a building. It lists the types of equipment connected to each circuit such as fluorescent lighting, outlets, motors, and appliances. It also indicates which of the 3 electrical phases (L1, L2, L3) each circuit is connected to.
4.1.7 Example Domestic 3
The document calculates the electrical load of communal services in an apartment building. It shows that 24 lighting points will draw 240 watts and 6 10A sockets will draw up to 12A, for a total demand of 18A per phase. The total demand current per phase for communal services is 18A.
4.1.6 Example Domestic 2
The document calculates the electrical load and demand for 6 living units per phase. It lists the types of loads in each unit, the quantity and allowance per unit, and uses this to calculate the total demand current for phases L1, L2 and L3, which is 154.4 amps for each phase. The key loads included are lighting, power outlets, cooking ranges, air conditioners and hot water systems.
4.1.5 Example Domestic 1
This document discusses the number of living units per phase of a project. It calculates that for 18 total living units divided into 3 phases, there would be 6 living units per phase.
4.1.4 Step 2
This document summarizes the electrical load calculations for 11 circuits in a home. It lists the load type and description for each circuit, the current allowance per unit, and calculates the demand in amps for circuits 1-10. The largest demands are 17.7 amps for an air conditioner and 15 amps for an off-peak hot water system. The total calculated demand current for each phase is 40.7, 39.5, and 46.5 amps respectively.
4.1.3 Example Solution Three
The document calculates the electrical load and demand current for 11 circuits in a home. It groups the loads into categories like lighting, outlets, appliances, and assigns each a description, allowance, and demand calculation. The total demand current per phase is summarized at the bottom, with the highest draw of 46.5 amps on phase L3.
4.1.2 Example Three
The document outlines the functions and ratings of 12 electrical circuits. Circuit 1 provides power for 13 indoor lighting points. Circuit 10 powers an air conditioner rated at 23.6 amps per phase and can draw power from circuits L1, L2, and L3. Circuits 11a and 11b each power a controlled load hot water unit rated at 3.6 kW.
4.1.1 Example Single
This document calculates the total demand current for an electrical installation consisting of:
- 21 lighting points and 12 double sockets, contributing 5A and 15A respectively
- 15 single sockets contributing 10A
- A 6kW oven contributing 0.5A
- A 2.4kW water heater contributing 0.33A
The total demand current calculated is 45.83A.
5.4.4 LR Circuits
The document discusses the time constant and final current value for an RL circuit. It states that:
1) The time constant for the circuit is 0.17 seconds based on the given inductance and resistance values.
2) It will take approximately 0.85 seconds (5 time constants) for the current to reach its final value.
3) Using Ohm's law, the approximate final current after 0.85 seconds is 2 amps.
14.5.4 Example 1 Part 1
This document calculates the apparent power, power factor, and phase angle for a circuit. It finds that the apparent power is 2.308 kVA by multiplying the current of 9.615 by the voltage of 240. This apparent power is larger than the actual power of 1.5 kW, indicating a poor power factor of 0.65 or a 49.46 degree phase angle between the current and voltage.
14.1.2 TRA Power
Reactive power (Q) and true power (P) combine to form apparent power (S). Apparent power is the combination of true power, which is the usable energy in a circuit, and reactive power, which is stored energy that results from the combination of voltage and current out of phase.
14.5.8 Example 1 Part 5
This document calculates the true power, apparent power, and total current for a circuit. It determines that the true power is 1.5 kW, the apparent power is 1.5009 kVA, and the power factor is 0.99994. It then calculates that with an apparent power of 1.5009 kVA at 240 Volts, the total current would be 6.25 amps.
More from Talia Carbis (20)
Recently uploaded
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!ย
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(๐๐๐ ๐๐๐) (๐๐๐ฌ๐ฌ๐จ๐ง ๐)-๐๐ซ๐๐ฅ๐ข๐ฆ๐ฌ
๐๐ข๐ฌ๐๐ฎ๐ฌ๐ฌ ๐ญ๐ก๐ ๐๐๐ ๐๐ฎ๐ซ๐ซ๐ข๐๐ฎ๐ฅ๐ฎ๐ฆ ๐ข๐ง ๐ญ๐ก๐ ๐๐ก๐ข๐ฅ๐ข๐ฉ๐ฉ๐ข๐ง๐๐ฌ:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
๐๐ฑ๐ฉ๐ฅ๐๐ข๐ง ๐ญ๐ก๐ ๐๐๐ญ๐ฎ๐ซ๐ ๐๐ง๐ ๐๐๐จ๐ฉ๐ ๐จ๐ ๐๐ง ๐๐ง๐ญ๐ซ๐๐ฉ๐ซ๐๐ง๐๐ฎ๐ซ:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdfุณู
ูุฑ ุจุณูููู
ู
ุตุญู ุฃุญุฑู ุงูุฎูุงู ูููุฑุงุก ุงูุนุดุฑุฉุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุจุงูุชูููู ูุตูุง ุณู
ูุฑ ุจุณูููู ุบูุฑ ุงููู ููย
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
โ What is event processing in MuleSoft?
โ Types of event processing models in Mule 4
โ Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Benner "Expanding Pathways to Publishing Careers"
Benner "Expanding Pathways to Publishing Careers"National Information Standards Organization (NISO)
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.ย
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
A Independรชncia da Amรฉrica Espanhola LAPBOOK.pdf
Lapbook sobre independรชncia da Amรฉrica Espanhola.
Recently uploaded (20)
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
ย
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
ย
SWOT analysis in the project Keeping the Memory @live.pptx
SWOT analysis in the project Keeping the Memory @live.pptx
ย
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
ย
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
ย
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ู
ุตุญู ุงููุฑุงุกุงุช ุงูุนุดุฑ ุฃุนุฏ ุฃุญุฑู ุงูุฎูุงู ุณู
ูุฑ ุจุณูููู.pdf
ย
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
ย
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
ย
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
ย
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
ย
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
ย
A Independรชncia da Amรฉrica Espanhola LAPBOOK.pdf
A Independรชncia da Amรฉrica Espanhola LAPBOOK.pdf
ย
9.2.2percentage
- 4. Applied Electricity Two Time Constant T % Increase % Decrease 0 0% 100%
- 5. Applied Electricity Two Time Constant T % Increase % Decrease 0 0% 100% 1 63.20% 36.80%
- 6. Applied Electricity Two Time Constant T % Increase % Decrease 0 0% 100% 1 63.20% 36.80% 2 86.50% 13.50%
- 7. Applied Electricity Two Time Constant T % Increase % Decrease 0 0% 100% 1 63.20% 36.80% 2 86.50% 13.50% 3 95% 5%
- 8. Applied Electricity Two Time Constant T % Increase % Decrease 0 0% 100% 1 63.20% 36.80% 2 86.50% 13.50% 3 95% 5% 4 98.20% 1.80%
- 9. Applied Electricity Two Time Constant T % Increase % Decrease 0 0% 100% 1 63.20% 36.80% 2 86.50% 13.50% 3 95% 5% 4 98.20% 1.80% 5 100% 0%