Report
Share
Recommended
Photoshoot Plan
The document provides details for a photography project to create a poster for a music festival. It will include a vertical landscape photo taken by the student at Epsom Downs around 5 pm when the sun is out. The photo will be darkened at the bottom to fade out from top to bottom. Reference images show inspiration for including open sky and grass, visible sun, and detailed clouds.
Production Plan
This document outlines the process for print-based advertising over 4 weeks from June 20th to July 17th. It involves briefing and SWOT analysis, concluding the advert's objective, research on the target market and competitors, identifying the target audience, selecting appropriate media, setting the advertising budget, designing and creating the ad, perfecting the ad, deciding the placement and timing, executing the ad campaign, and reviewing its performance to improve future ads. The goal is to create a successful advertising campaign through strategic planning and execution.
Proposal Sunset Fest
1. The document outlines a plan for an advertising campaign for a new music festival called "Sunset Fest" taking place in the summer of 2016 near a beach.
2. The campaign aims to promote new artists and provide entertainment through music and attractions. The target audience is 14-24 year olds of varying economic classes who seek new experiences.
3. The key message is that the festival will feature new music in a fun environment to create new memories, with one well-known artist, Ed Sheeran, to attract audiences. Print ads will feature sunset beach imagery and promote the music, location, and timing.
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...Close the Loop Company
The Sharing Economy ~ Why everyone should be borrowing, reusing, fixing or buying items secondhand to conserve our natural resources. Hold a FREE Give & Take Day!Photoshoot Plan Sunset Fest
I will be producing a print advertisement for the upcoming Sunset Fest festival by taking photographs myself. I plan to take a mid-view shot of the sunset over the sea and a bird's-eye view of pebbles looking into the sunset. In post-production, I will increase the contrast and vibrancy to make the sea look bluer while keeping the photos from being too bright by using a low ISO number and exposure adjustments. The images were taken alone in Cornwall without any models on August 11, 2014.
Gamification: Applications & Opportunities
The growing trend of gamification is defined and analyzed to explore its current applications, market opportunities, and future directions.
Task 10
The document outlines a pitch proposal for a marketing campaign that will include a poster, leaflet, and billboard advert. It will target young people aged 16-24 and middle aged people interested in volunteering. The designs will use bold, striking fonts in red, yellow, and orange colors and reflect the charity in a positive way. Resources to be used include a computer, Photoshop, camera, stock images, and the charity's products. Various personnel such as a copywriter, photographer, and designer will be needed. The schedule allocates one day for layout design and four days to create the materials, with two extra days for problems.
Recommended
Photoshoot Plan
The document provides details for a photography project to create a poster for a music festival. It will include a vertical landscape photo taken by the student at Epsom Downs around 5 pm when the sun is out. The photo will be darkened at the bottom to fade out from top to bottom. Reference images show inspiration for including open sky and grass, visible sun, and detailed clouds.
Production Plan
This document outlines the process for print-based advertising over 4 weeks from June 20th to July 17th. It involves briefing and SWOT analysis, concluding the advert's objective, research on the target market and competitors, identifying the target audience, selecting appropriate media, setting the advertising budget, designing and creating the ad, perfecting the ad, deciding the placement and timing, executing the ad campaign, and reviewing its performance to improve future ads. The goal is to create a successful advertising campaign through strategic planning and execution.
Proposal Sunset Fest
1. The document outlines a plan for an advertising campaign for a new music festival called "Sunset Fest" taking place in the summer of 2016 near a beach.
2. The campaign aims to promote new artists and provide entertainment through music and attractions. The target audience is 14-24 year olds of varying economic classes who seek new experiences.
3. The key message is that the festival will feature new music in a fun environment to create new memories, with one well-known artist, Ed Sheeran, to attract audiences. Print ads will feature sunset beach imagery and promote the music, location, and timing.
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...
Professional Recyclers of Pennsylvania, aka PROP ~ Close the Loop Company Pre...Close the Loop Company
The Sharing Economy ~ Why everyone should be borrowing, reusing, fixing or buying items secondhand to conserve our natural resources. Hold a FREE Give & Take Day!Photoshoot Plan Sunset Fest
I will be producing a print advertisement for the upcoming Sunset Fest festival by taking photographs myself. I plan to take a mid-view shot of the sunset over the sea and a bird's-eye view of pebbles looking into the sunset. In post-production, I will increase the contrast and vibrancy to make the sea look bluer while keeping the photos from being too bright by using a low ISO number and exposure adjustments. The images were taken alone in Cornwall without any models on August 11, 2014.
Gamification: Applications & Opportunities
The growing trend of gamification is defined and analyzed to explore its current applications, market opportunities, and future directions.
Task 10
The document outlines a pitch proposal for a marketing campaign that will include a poster, leaflet, and billboard advert. It will target young people aged 16-24 and middle aged people interested in volunteering. The designs will use bold, striking fonts in red, yellow, and orange colors and reflect the charity in a positive way. Resources to be used include a computer, Photoshop, camera, stock images, and the charity's products. Various personnel such as a copywriter, photographer, and designer will be needed. The schedule allocates one day for layout design and four days to create the materials, with two extra days for problems.
All values
The document outlines the eight core Army Values: Loyalty, Duty, Respect, Selfless Service, Honor, Integrity, Personal Courage. It provides definitions for each value and includes quotes related to demonstrating that value as a soldier. The Army Values are part of an ethics code to guide soldiers in their service.
UNIT 35 - LO2
The document outlines two potential social media product ideas - LifeFollower, a site for users to follow friends and share photos/media, and GameFame, a site for gamers to follow game studios, developers, and purchase games. Details provided include target audiences, color schemes, font styles, copyright information, competitors, synergies with other platforms, and page formats for each idea. The document seeks to comprehensively plan out the key aspects of developing these two social media products.
Production Plan
This document outlines the timeline and key steps for developing a website called Life Follower. It includes the following stages:
1. Pre-production from January to February involves creating a business plan, finding a domain name, pitching the idea to investors, and gaining funding.
2. Production from March to May focuses on designing and building the website, hiring additional designers, developers, and a project manager.
3. Post-production from June to August includes marketing and promoting the site to other social media platforms and publications, thorough testing for security and user experience, getting user feedback from a focus group, and officially launching the Life Follower website.
Campaign Proposal - UnExpected
This document contains a campaign proposal for an experiential company called Unexpected. It includes research on the target market of overworked Singaporeans aged 30-40, a campaign strategy with teaser and launch phases, visuals for various advertising placements, and a budget and ROI projection. The campaign aims to get people to expect the unexpected in their lives by signing up for Unexpected's unique day-long experiences. It is estimated the campaign will break even by selling 3000 packages.
Experince certificate
Mr. Muhammad Zubair Noor worked as a QA/QC Engineer for Engin (Pvt) Ltd from March 16, 2014 to present on two construction projects for the Pakistan Atomic Energy Commission: 1) Construction of SR, RS & EM Building for C-3/C-4 in Chashma, and 2) Construction of Internal Roads, Foot Paths, Fencing, and Covered Walkways for C-3/C-4 in Chashma. The project manager found him to be efficient, hard working, and dedicated, able to work in tough conditions and independently according to technical specifications.
Gioco e educazione
Le slide della mia parte del seminario standard su "Gioco e educazione" proposto dai Fabbricastorie.
Maggiori informazioni sul progetto sul sito dei Fabbricastorie
http://www.fabbricastorie.it/project/giochi-di-comitato-scuola-e-formazione/
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
4.1.13 Light Demand 3
This short document does not provide any substantive information to summarize in 3 sentences or less. It only notes that an explanation is not contained in a workbook, but provides no other context or details.
4.1.12 Light Demand 2 Table Part2
The document outlines the demand calculations for 19 different circuit load groups across 3 phases. It lists the load description, current allowance calculation method, and resulting demand current for each phase. The total demand current per phase is calculated at the bottom, with values of 143.8 amps for phase 1, 153.25 amps for phase 2, and 145.05 amps for phase 3.
4.1.11 Light Demand 2 Table
The document contains a table that calculates the current demand per phase for various circuit load groups in an electrical system. It lists 19 load groups categorized by letters A through D, describing each load. It shows the current allowance calculation method and resulting demand in amps for each phase. The total demand current calculated per phase is 143.8 amps for L1, 153.25 amps for L2, and 145.05 amps for L3.
4.1.10 Light Demand 2
This 3 sentence document provides instructions to refer to a specific table on a specific page of a particular standard for additional explanatory information not contained in the current workbook. The instructions direct the reader to Table C2 on page 359 of AS/NZA 3000:2007 for an explanation that is not included in the current document.
4.1.9 Light Demand 1
The document describes the functions of 19 electrical circuits in a building. It lists the types of equipment connected to each circuit such as fluorescent lighting, outlets, motors, and appliances. It also indicates which of the 3 electrical phases (L1, L2, L3) each circuit is connected to.
4.1.7 Example Domestic 3
The document calculates the electrical load of communal services in an apartment building. It shows that 24 lighting points will draw 240 watts and 6 10A sockets will draw up to 12A, for a total demand of 18A per phase. The total demand current per phase for communal services is 18A.
4.1.6 Example Domestic 2
The document calculates the electrical load and demand for 6 living units per phase. It lists the types of loads in each unit, the quantity and allowance per unit, and uses this to calculate the total demand current for phases L1, L2 and L3, which is 154.4 amps for each phase. The key loads included are lighting, power outlets, cooking ranges, air conditioners and hot water systems.
4.1.5 Example Domestic 1
This document discusses the number of living units per phase of a project. It calculates that for 18 total living units divided into 3 phases, there would be 6 living units per phase.
4.1.4 Step 2
This document summarizes the electrical load calculations for 11 circuits in a home. It lists the load type and description for each circuit, the current allowance per unit, and calculates the demand in amps for circuits 1-10. The largest demands are 17.7 amps for an air conditioner and 15 amps for an off-peak hot water system. The total calculated demand current for each phase is 40.7, 39.5, and 46.5 amps respectively.
4.1.3 Example Solution Three
The document calculates the electrical load and demand current for 11 circuits in a home. It groups the loads into categories like lighting, outlets, appliances, and assigns each a description, allowance, and demand calculation. The total demand current per phase is summarized at the bottom, with the highest draw of 46.5 amps on phase L3.
4.1.2 Example Three
The document outlines the functions and ratings of 12 electrical circuits. Circuit 1 provides power for 13 indoor lighting points. Circuit 10 powers an air conditioner rated at 23.6 amps per phase and can draw power from circuits L1, L2, and L3. Circuits 11a and 11b each power a controlled load hot water unit rated at 3.6 kW.
4.1.1 Example Single
This document calculates the total demand current for an electrical installation consisting of:
- 21 lighting points and 12 double sockets, contributing 5A and 15A respectively
- 15 single sockets contributing 10A
- A 6kW oven contributing 0.5A
- A 2.4kW water heater contributing 0.33A
The total demand current calculated is 45.83A.
5.4.4 LR Circuits
The document discusses the time constant and final current value for an RL circuit. It states that:
1) The time constant for the circuit is 0.17 seconds based on the given inductance and resistance values.
2) It will take approximately 0.85 seconds (5 time constants) for the current to reach its final value.
3) Using Ohm's law, the approximate final current after 0.85 seconds is 2 amps.
More Related Content
Viewers also liked
All values
The document outlines the eight core Army Values: Loyalty, Duty, Respect, Selfless Service, Honor, Integrity, Personal Courage. It provides definitions for each value and includes quotes related to demonstrating that value as a soldier. The Army Values are part of an ethics code to guide soldiers in their service.
UNIT 35 - LO2
The document outlines two potential social media product ideas - LifeFollower, a site for users to follow friends and share photos/media, and GameFame, a site for gamers to follow game studios, developers, and purchase games. Details provided include target audiences, color schemes, font styles, copyright information, competitors, synergies with other platforms, and page formats for each idea. The document seeks to comprehensively plan out the key aspects of developing these two social media products.
Production Plan
This document outlines the timeline and key steps for developing a website called Life Follower. It includes the following stages:
1. Pre-production from January to February involves creating a business plan, finding a domain name, pitching the idea to investors, and gaining funding.
2. Production from March to May focuses on designing and building the website, hiring additional designers, developers, and a project manager.
3. Post-production from June to August includes marketing and promoting the site to other social media platforms and publications, thorough testing for security and user experience, getting user feedback from a focus group, and officially launching the Life Follower website.
Campaign Proposal - UnExpected
This document contains a campaign proposal for an experiential company called Unexpected. It includes research on the target market of overworked Singaporeans aged 30-40, a campaign strategy with teaser and launch phases, visuals for various advertising placements, and a budget and ROI projection. The campaign aims to get people to expect the unexpected in their lives by signing up for Unexpected's unique day-long experiences. It is estimated the campaign will break even by selling 3000 packages.
Experince certificate
Mr. Muhammad Zubair Noor worked as a QA/QC Engineer for Engin (Pvt) Ltd from March 16, 2014 to present on two construction projects for the Pakistan Atomic Energy Commission: 1) Construction of SR, RS & EM Building for C-3/C-4 in Chashma, and 2) Construction of Internal Roads, Foot Paths, Fencing, and Covered Walkways for C-3/C-4 in Chashma. The project manager found him to be efficient, hard working, and dedicated, able to work in tough conditions and independently according to technical specifications.
Gioco e educazione
Le slide della mia parte del seminario standard su "Gioco e educazione" proposto dai Fabbricastorie.
Maggiori informazioni sul progetto sul sito dei Fabbricastorie
http://www.fabbricastorie.it/project/giochi-di-comitato-scuola-e-formazione/
Viewers also liked (6)
More from Talia Carbis
7.4.6 slip
This document describes how to calculate the rotor frequency of a two-pole, 50 Hz induction motor given the rotor speed of 2850 rpm. It shows that the slip speed is 3000 rpm, the slip percentage is 5%, and using the formula fs x %slip / 100, the rotor frequency is calculated to be 2.5 Hz.
4.2.1 Better Load
The document describes the circuits and loads for an electrical installation. It lists 19 circuits with various lighting, power outlet, motor, and appliance loads. It calculates the demand current in amps for each phase based on adding the full load or percentage of full load for each circuit based on rating and number of devices. The highest calculated demand is 153.25 amps on phase L2. With a 10% allowance for future additions, the total recommended maximum current is 168.575 amps.
4.1.13 Light Demand 3
This short document does not provide any substantive information to summarize in 3 sentences or less. It only notes that an explanation is not contained in a workbook, but provides no other context or details.
4.1.12 Light Demand 2 Table Part2
The document outlines the demand calculations for 19 different circuit load groups across 3 phases. It lists the load description, current allowance calculation method, and resulting demand current for each phase. The total demand current per phase is calculated at the bottom, with values of 143.8 amps for phase 1, 153.25 amps for phase 2, and 145.05 amps for phase 3.
4.1.11 Light Demand 2 Table
The document contains a table that calculates the current demand per phase for various circuit load groups in an electrical system. It lists 19 load groups categorized by letters A through D, describing each load. It shows the current allowance calculation method and resulting demand in amps for each phase. The total demand current calculated per phase is 143.8 amps for L1, 153.25 amps for L2, and 145.05 amps for L3.
4.1.10 Light Demand 2
This 3 sentence document provides instructions to refer to a specific table on a specific page of a particular standard for additional explanatory information not contained in the current workbook. The instructions direct the reader to Table C2 on page 359 of AS/NZA 3000:2007 for an explanation that is not included in the current document.
4.1.9 Light Demand 1
The document describes the functions of 19 electrical circuits in a building. It lists the types of equipment connected to each circuit such as fluorescent lighting, outlets, motors, and appliances. It also indicates which of the 3 electrical phases (L1, L2, L3) each circuit is connected to.
4.1.7 Example Domestic 3
The document calculates the electrical load of communal services in an apartment building. It shows that 24 lighting points will draw 240 watts and 6 10A sockets will draw up to 12A, for a total demand of 18A per phase. The total demand current per phase for communal services is 18A.
4.1.6 Example Domestic 2
The document calculates the electrical load and demand for 6 living units per phase. It lists the types of loads in each unit, the quantity and allowance per unit, and uses this to calculate the total demand current for phases L1, L2 and L3, which is 154.4 amps for each phase. The key loads included are lighting, power outlets, cooking ranges, air conditioners and hot water systems.
4.1.5 Example Domestic 1
This document discusses the number of living units per phase of a project. It calculates that for 18 total living units divided into 3 phases, there would be 6 living units per phase.
4.1.4 Step 2
This document summarizes the electrical load calculations for 11 circuits in a home. It lists the load type and description for each circuit, the current allowance per unit, and calculates the demand in amps for circuits 1-10. The largest demands are 17.7 amps for an air conditioner and 15 amps for an off-peak hot water system. The total calculated demand current for each phase is 40.7, 39.5, and 46.5 amps respectively.
4.1.3 Example Solution Three
The document calculates the electrical load and demand current for 11 circuits in a home. It groups the loads into categories like lighting, outlets, appliances, and assigns each a description, allowance, and demand calculation. The total demand current per phase is summarized at the bottom, with the highest draw of 46.5 amps on phase L3.
4.1.2 Example Three
The document outlines the functions and ratings of 12 electrical circuits. Circuit 1 provides power for 13 indoor lighting points. Circuit 10 powers an air conditioner rated at 23.6 amps per phase and can draw power from circuits L1, L2, and L3. Circuits 11a and 11b each power a controlled load hot water unit rated at 3.6 kW.
4.1.1 Example Single
This document calculates the total demand current for an electrical installation consisting of:
- 21 lighting points and 12 double sockets, contributing 5A and 15A respectively
- 15 single sockets contributing 10A
- A 6kW oven contributing 0.5A
- A 2.4kW water heater contributing 0.33A
The total demand current calculated is 45.83A.
5.4.4 LR Circuits
The document discusses the time constant and final current value for an RL circuit. It states that:
1) The time constant for the circuit is 0.17 seconds based on the given inductance and resistance values.
2) It will take approximately 0.85 seconds (5 time constants) for the current to reach its final value.
3) Using Ohm's law, the approximate final current after 0.85 seconds is 2 amps.
14.5.4 Example 1 Part 1
This document calculates the apparent power, power factor, and phase angle for a circuit. It finds that the apparent power is 2.308 kVA by multiplying the current of 9.615 by the voltage of 240. This apparent power is larger than the actual power of 1.5 kW, indicating a poor power factor of 0.65 or a 49.46 degree phase angle between the current and voltage.
14.1.2 TRA Power
Reactive power (Q) and true power (P) combine to form apparent power (S). Apparent power is the combination of true power, which is the usable energy in a circuit, and reactive power, which is stored energy that results from the combination of voltage and current out of phase.
14.5.8 Example 1 Part 5
This document calculates the true power, apparent power, and total current for a circuit. It determines that the true power is 1.5 kW, the apparent power is 1.5009 kVA, and the power factor is 0.99994. It then calculates that with an apparent power of 1.5009 kVA at 240 Volts, the total current would be 6.25 amps.