6.5 Bending light beams
โขDownload as PPTX, PDFโข
1 likeโข341 views
Light bends when moving between materials with different densities due to refraction. Optical fibers use total internal reflection to transmit light along its length. The frequency and wavelength of light are inversely related, with higher frequencies appearing bluer and lower frequencies appearing redder.
Report
Share
Report
Share
Recommended
6.4 bending light
The document discusses the refraction of light and how it causes optical illusions. It explains that when light travels from one material to another of different density, it changes direction. Specifically, light bends toward the normal when moving to a denser material, and away from the normal when moving to a less dense material. The document provides instructions for an experiment to observe and measure the refraction of light through a glass block at different angles of incidence.
Light
The document discusses light and how it interacts with different materials through reflection and refraction. It provides examples of regular and irregular reflection using aluminum foil and describes how light bends as it passes from one medium to another with different densities, as in a refraction experiment using a pencil and water. Students are asked to observe and analyze how light interacts with dense and less dense materials and predict how light will affect animals in an aquarium when a light is turned on above.
Refraction Of Light
Light changes direction when passing from one medium to another due to refraction. Refraction is the bending of light that occurs when light travels from one medium into another at a different density, with the angle of refraction always being smaller than the angle of incidence, causing light to bend toward the normal. The refractive index determines the amount of bending of light due to the changing propagation speed in different materials.
Markets for Metamaterials 2016-2023 Slides
Slides created from the n-tech Research report, Markets for Metamaterials 2016-2023 that the firm issued on Q1 of 2016. In the report the firm stated that that the market for metamaterials used for communications, medicine, defense, aerospace, sensing and other applications will exceed $1.0 billion by 2021 and reach $4.1 billion by 2025. - See more at: http://ntechresearch.com/news/n-tech-research-predicts-market-for-metamaterials-will-reach-over-1.0-by-20
Using Metamaterials as Optical Perfect Absorber
Article review and presentation on basics of using metamaterials as optical perfect absorbers
Metamaterial Course Final Project ( Optional Graduate Course )
Dr. Leyla Yousefi
METAMATERIALS
This document discusses metamaterials. Metamaterials are artificial materials engineered to have properties that are not found in nature. They are made of assemblies of multiple conventional elements arranged in periodic patterns which give them properties that depend on geometry rather than chemical composition. Negative refractive index can be achieved when the permeability and permittivity are both negative. Potential applications of metamaterials include invisibility cloaks, superlenses, antennas, and absorbing light. Further work is needed to optimize fabrication processes and characterize more complex 3D metamaterial structures.
Metamaterials
This document provides an overview of metamaterials. It begins by defining metamaterials as materials engineered to have properties that do not occur naturally, such as a negative index of refraction. The document then discusses the history of metamaterials, including early theoretical work in the 1960s and recent developments in fabrication. Examples of potential applications mentioned include invisibility cloaking, subwavelength imaging, and smaller antennas. The document also provides brief descriptions of common metamaterial structures and fabrication techniques using nanostructures like split-ring resonators.
Metamaterials
Metamaterials are artificially engineered materials that gain their properties from their structure rather than their composition, allowing them to manipulate electromagnetic waves in ways not found in nature. They have various applications including terahertz, photonic, plasmonic, tunable, and acoustic metamaterials as well as superlenses, cloaking devices, antennas, and seismic wave manipulation. Metamaterials have the potential to render objects invisible by controlling how light interacts with them.
Recommended
6.4 bending light
The document discusses the refraction of light and how it causes optical illusions. It explains that when light travels from one material to another of different density, it changes direction. Specifically, light bends toward the normal when moving to a denser material, and away from the normal when moving to a less dense material. The document provides instructions for an experiment to observe and measure the refraction of light through a glass block at different angles of incidence.
Light
The document discusses light and how it interacts with different materials through reflection and refraction. It provides examples of regular and irregular reflection using aluminum foil and describes how light bends as it passes from one medium to another with different densities, as in a refraction experiment using a pencil and water. Students are asked to observe and analyze how light interacts with dense and less dense materials and predict how light will affect animals in an aquarium when a light is turned on above.
Refraction Of Light
Light changes direction when passing from one medium to another due to refraction. Refraction is the bending of light that occurs when light travels from one medium into another at a different density, with the angle of refraction always being smaller than the angle of incidence, causing light to bend toward the normal. The refractive index determines the amount of bending of light due to the changing propagation speed in different materials.
Markets for Metamaterials 2016-2023 Slides
Slides created from the n-tech Research report, Markets for Metamaterials 2016-2023 that the firm issued on Q1 of 2016. In the report the firm stated that that the market for metamaterials used for communications, medicine, defense, aerospace, sensing and other applications will exceed $1.0 billion by 2021 and reach $4.1 billion by 2025. - See more at: http://ntechresearch.com/news/n-tech-research-predicts-market-for-metamaterials-will-reach-over-1.0-by-20
Using Metamaterials as Optical Perfect Absorber
Article review and presentation on basics of using metamaterials as optical perfect absorbers
Metamaterial Course Final Project ( Optional Graduate Course )
Dr. Leyla Yousefi
METAMATERIALS
This document discusses metamaterials. Metamaterials are artificial materials engineered to have properties that are not found in nature. They are made of assemblies of multiple conventional elements arranged in periodic patterns which give them properties that depend on geometry rather than chemical composition. Negative refractive index can be achieved when the permeability and permittivity are both negative. Potential applications of metamaterials include invisibility cloaks, superlenses, antennas, and absorbing light. Further work is needed to optimize fabrication processes and characterize more complex 3D metamaterial structures.
Metamaterials
This document provides an overview of metamaterials. It begins by defining metamaterials as materials engineered to have properties that do not occur naturally, such as a negative index of refraction. The document then discusses the history of metamaterials, including early theoretical work in the 1960s and recent developments in fabrication. Examples of potential applications mentioned include invisibility cloaking, subwavelength imaging, and smaller antennas. The document also provides brief descriptions of common metamaterial structures and fabrication techniques using nanostructures like split-ring resonators.
Metamaterials
Metamaterials are artificially engineered materials that gain their properties from their structure rather than their composition, allowing them to manipulate electromagnetic waves in ways not found in nature. They have various applications including terahertz, photonic, plasmonic, tunable, and acoustic metamaterials as well as superlenses, cloaking devices, antennas, and seismic wave manipulation. Metamaterials have the potential to render objects invisible by controlling how light interacts with them.
7La/1
The document summarizes key facts about the Earth:
1) The planet we live on is called Earth. It gets its heat and light from the Sun. The Moon is Earth's natural satellite and orbits Earth once every 28 days.
2) A diagram labels that one side of Earth experiences nighttime while the other experiences daytime due to its rotation on its axis.
3) Additional facts provided are that Earth's year has 365 days, a leap year occurs every 4 years, Earth orbits the Sun in 365.25 days, and Earth completes one spin every 24 hours.
7 l1 the earth in space
A day is the time it takes for the Earth to spin on its axis. A month is the time it takes for the Moon to orbit the Earth. A year is the time it takes for the Earth to orbit once around the Sun. The document contains information about the definitions of a day, month, and year according to the movement and positions of the Earth, Moon, and Sun in space. It also lists learning objectives about describing and explaining the motions that cause days, months, years, and seasons.
7 l target sheet
This document outlines learning objectives related to understanding the motion of objects in space, including: how the Earth revolves around the sun and rotates on its axis, causing day/night and seasons; how the tilt of the Earth's axis causes seasons; why we see phases of the Moon and solar/lunar eclipses occur; how to distinguish between stars and planets based on their motion; and how our understanding of the universe has developed over time through scientific observation.
Making a loudspeaker
Sounds are produced by vibrations that travel through a medium such as air. The document discusses how to construct and test a loudspeaker. It instructs the reader to plug in the speaker, turn on the voltage, switch it on at the mains, and listen as they move their ear closer to identify how the sound changes and what causes this. The learning objectives are to describe how sounds are produced, construct a loudspeaker, and explain how a loudspeaker works.
Sound homework
Pupils conducted a sound experiment in a playground to investigate how walls cast sound shadows. They took sound level measurements at various points around the playground using a sound meter after making a standard sound. The measurements showed lower sound levels in positions located behind walls and structures relative to the sound source, demonstrating the shadowing effect of walls on sound propagation.
May the forces be with you
This document discusses forces, mass, and acceleration. It provides examples of calculating acceleration using the equation F=ma. It includes sample problems such as determining the force needed to accelerate a space shuttle or the acceleration of a cyclist pedaling with a given force. Practice problems are provided for students to calculate acceleration, force, or mass given two of the three variables.
Forces making a force meter
A force meter measures force in Newtons. It works by using a rubber band of known length that stretches when a force is applied. The amount the rubber band stretches corresponds to the amount of force applied, allowing the force to be measured in Newtons on a scale.
6.3 food glorious food
Food contains chemical energy that originally comes from the Sun. The amount of energy a person needs each day can vary depending on factors like their body size, age, gender, activity levels, and environmental conditions like temperature. While two people may consume the same amount of energy, one may still gain weight due to differences in their metabolism or physical activity levels.
Assignment 6.1
This document contains instructions and questions for Assignment 6.1. Students are instructed to show all working and include relevant units. The questions involve calculating quantities using given values and units, including multiplying and dividing measurements in m, m3, ml, and kg/m3. Conversions between standard and scientific notation are also required.
Assignment 6.2
This document contains a possible table of results that shows temperature readings in degrees Celsius taken at 11:00, 12:00, 13:00 and 14:00 hours each day from Monday to Friday. The temperatures generally increase throughout the day, with the highest readings occurring between 13:00 and 14:00 hours each afternoon.
6.4 bending light
Light changes direction when moving between different materials due to refraction. An experiment is described where a glass block is used to refract light rays entering at various angles, and the angles are measured and graphed. The graph shows the relationship between the incident and refracted angles, with the refracted angle increasing as the incident angle increases. This property of refraction is important for applications like lenses and understanding optical illusions.
Assignment 6.1 answers
This document contains 6 math questions requiring calculations with units. Question 1 involves multiplying two lengths. Question 2 gives a length. Question 3 involves (a) multiplying three lengths and (b) multiplying the results of part a. Question 4 involves (a) converting ml to m3 and (b) writing the answer in scientific notation. Question 5 involves (a) calculating length and volume and (b) calculating density. Question 6 involves calculating volume and density. Full working and units are required for all answers.
6.4 bending light
1. Light changes direction when moving between different materials due to refraction. Scientists studying refracting telescopes need accurate information on how light refracts when moving between air and glass.
2. An experiment is described where light passes through a semicircular glass block and the angle of refraction is measured for different angles of incidence.
3. The results are plotted on a graph showing the relationship between incident and refracted angles, helping to understand how optics can correct vision problems.
5.8 current and pd in a circuit
The document discusses a circuit with two components in series, a resistor and a buzzer, that have different resistances. It asks what the potential difference (p.d.) is across each component and what this reveals about their relative resistances. It then provides learning objectives and example calculations for current, potential difference, and resistance in series circuits.
Speed and velocity
The document discusses key concepts related to speed, velocity, distance, and time. It provides definitions of speed, distance, displacement, velocity, and average and instantaneous speed. Examples are given to illustrate the difference between distance and displacement. Graphs showing variations in distance and velocity over time are presented, and the relationships between distance, time, speed, velocity, and their equations are summarized in a table.
Document in windows internet explorer
The document describes an experiment to determine the laws of reflection. [1] Students are instructed to use a mirror, light source, and protractor to measure the angle of incidence and reflection of light rays. [2] They will shine light at a mirror from various angles and measure the corresponding reflected angles to see if the angle of reflection equals the angle of incidence. [3] By plotting their results on a graph, students can evaluate whether the evidence supports the statement that the angle of reflection equals the angle of incidence.
6.3 giant mirror
A village in Italy installed a large mirror on a mountain opposite their village to direct sunlight into the village. The mirror helped brighten the village by reflecting sunlight into the dark areas between the mountains. Villagers could now grow crops that previously did not receive enough sunlight. The mirror demonstrated how reflected light can help illuminate dark spaces.
6.2 energy everywhere
This document discusses different types of energy, including potential energy which is stored or hidden energy that has the ability to do work, and kinetic energy which is energy of motion. It lists learning objectives about forms of energy and energy transfers. The rest of the document appears to contain questions at different levels about energy, asking about heat energy, potential vs kinetic energy, energy transfers, examples of potential energy storage, and drawing energy transfer diagrams.
Mark scheme
This document is a coursework assessment form for a GCE Advanced Subsidiary physics course. It provides criteria for evaluating student coursework in 5 areas: [1] the quality and independence of the student's research briefing, [2] the use and understanding of physics demonstrated, and [3] the selection, summarizing, explanation, and [4] understanding/critical thinking shown in the student's work. Scores from 1-5 are given for each criterion, with 5 being the highest score. The form also includes the student's name and ID number for record keeping purposes.
Booklet
1. The document provides guidance for students on completing a research briefing on a topic of their choosing in physics.
2. Students are instructed to independently research their topic from a variety of sources, consider the social or historical context of the physics, and communicate their findings in a 2000 word written report.
3. The document offers advice on choosing a suitable narrow but exploratory topic, conducting independent research, citing sources, and knowing when to stop research and begin writing their report.
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
(A Free eBook comprising 3 Sets of Presentation of a selection of Puzzles, Brain Teasers and Thinking Problems to exercise both the mind and the Right and Left Brain. To help keep the mind and brain fit and healthy. Good for both the young and old alike.
Answers are given for all the puzzles and problems.)
With Metta,
Bro. Oh Teik Bin ๐๐ค๐ค๐ฅฐ
More Related Content
More from mrrayner
7La/1
The document summarizes key facts about the Earth:
1) The planet we live on is called Earth. It gets its heat and light from the Sun. The Moon is Earth's natural satellite and orbits Earth once every 28 days.
2) A diagram labels that one side of Earth experiences nighttime while the other experiences daytime due to its rotation on its axis.
3) Additional facts provided are that Earth's year has 365 days, a leap year occurs every 4 years, Earth orbits the Sun in 365.25 days, and Earth completes one spin every 24 hours.
7 l1 the earth in space
A day is the time it takes for the Earth to spin on its axis. A month is the time it takes for the Moon to orbit the Earth. A year is the time it takes for the Earth to orbit once around the Sun. The document contains information about the definitions of a day, month, and year according to the movement and positions of the Earth, Moon, and Sun in space. It also lists learning objectives about describing and explaining the motions that cause days, months, years, and seasons.
7 l target sheet
This document outlines learning objectives related to understanding the motion of objects in space, including: how the Earth revolves around the sun and rotates on its axis, causing day/night and seasons; how the tilt of the Earth's axis causes seasons; why we see phases of the Moon and solar/lunar eclipses occur; how to distinguish between stars and planets based on their motion; and how our understanding of the universe has developed over time through scientific observation.
Making a loudspeaker
Sounds are produced by vibrations that travel through a medium such as air. The document discusses how to construct and test a loudspeaker. It instructs the reader to plug in the speaker, turn on the voltage, switch it on at the mains, and listen as they move their ear closer to identify how the sound changes and what causes this. The learning objectives are to describe how sounds are produced, construct a loudspeaker, and explain how a loudspeaker works.
Sound homework
Pupils conducted a sound experiment in a playground to investigate how walls cast sound shadows. They took sound level measurements at various points around the playground using a sound meter after making a standard sound. The measurements showed lower sound levels in positions located behind walls and structures relative to the sound source, demonstrating the shadowing effect of walls on sound propagation.
May the forces be with you
This document discusses forces, mass, and acceleration. It provides examples of calculating acceleration using the equation F=ma. It includes sample problems such as determining the force needed to accelerate a space shuttle or the acceleration of a cyclist pedaling with a given force. Practice problems are provided for students to calculate acceleration, force, or mass given two of the three variables.
Forces making a force meter
A force meter measures force in Newtons. It works by using a rubber band of known length that stretches when a force is applied. The amount the rubber band stretches corresponds to the amount of force applied, allowing the force to be measured in Newtons on a scale.
6.3 food glorious food
Food contains chemical energy that originally comes from the Sun. The amount of energy a person needs each day can vary depending on factors like their body size, age, gender, activity levels, and environmental conditions like temperature. While two people may consume the same amount of energy, one may still gain weight due to differences in their metabolism or physical activity levels.
Assignment 6.1
This document contains instructions and questions for Assignment 6.1. Students are instructed to show all working and include relevant units. The questions involve calculating quantities using given values and units, including multiplying and dividing measurements in m, m3, ml, and kg/m3. Conversions between standard and scientific notation are also required.
Assignment 6.2
This document contains a possible table of results that shows temperature readings in degrees Celsius taken at 11:00, 12:00, 13:00 and 14:00 hours each day from Monday to Friday. The temperatures generally increase throughout the day, with the highest readings occurring between 13:00 and 14:00 hours each afternoon.
6.4 bending light
Light changes direction when moving between different materials due to refraction. An experiment is described where a glass block is used to refract light rays entering at various angles, and the angles are measured and graphed. The graph shows the relationship between the incident and refracted angles, with the refracted angle increasing as the incident angle increases. This property of refraction is important for applications like lenses and understanding optical illusions.
Assignment 6.1 answers
This document contains 6 math questions requiring calculations with units. Question 1 involves multiplying two lengths. Question 2 gives a length. Question 3 involves (a) multiplying three lengths and (b) multiplying the results of part a. Question 4 involves (a) converting ml to m3 and (b) writing the answer in scientific notation. Question 5 involves (a) calculating length and volume and (b) calculating density. Question 6 involves calculating volume and density. Full working and units are required for all answers.
6.4 bending light
1. Light changes direction when moving between different materials due to refraction. Scientists studying refracting telescopes need accurate information on how light refracts when moving between air and glass.
2. An experiment is described where light passes through a semicircular glass block and the angle of refraction is measured for different angles of incidence.
3. The results are plotted on a graph showing the relationship between incident and refracted angles, helping to understand how optics can correct vision problems.
5.8 current and pd in a circuit
The document discusses a circuit with two components in series, a resistor and a buzzer, that have different resistances. It asks what the potential difference (p.d.) is across each component and what this reveals about their relative resistances. It then provides learning objectives and example calculations for current, potential difference, and resistance in series circuits.
Speed and velocity
The document discusses key concepts related to speed, velocity, distance, and time. It provides definitions of speed, distance, displacement, velocity, and average and instantaneous speed. Examples are given to illustrate the difference between distance and displacement. Graphs showing variations in distance and velocity over time are presented, and the relationships between distance, time, speed, velocity, and their equations are summarized in a table.
Document in windows internet explorer
The document describes an experiment to determine the laws of reflection. [1] Students are instructed to use a mirror, light source, and protractor to measure the angle of incidence and reflection of light rays. [2] They will shine light at a mirror from various angles and measure the corresponding reflected angles to see if the angle of reflection equals the angle of incidence. [3] By plotting their results on a graph, students can evaluate whether the evidence supports the statement that the angle of reflection equals the angle of incidence.
6.3 giant mirror
A village in Italy installed a large mirror on a mountain opposite their village to direct sunlight into the village. The mirror helped brighten the village by reflecting sunlight into the dark areas between the mountains. Villagers could now grow crops that previously did not receive enough sunlight. The mirror demonstrated how reflected light can help illuminate dark spaces.
6.2 energy everywhere
This document discusses different types of energy, including potential energy which is stored or hidden energy that has the ability to do work, and kinetic energy which is energy of motion. It lists learning objectives about forms of energy and energy transfers. The rest of the document appears to contain questions at different levels about energy, asking about heat energy, potential vs kinetic energy, energy transfers, examples of potential energy storage, and drawing energy transfer diagrams.
Mark scheme
This document is a coursework assessment form for a GCE Advanced Subsidiary physics course. It provides criteria for evaluating student coursework in 5 areas: [1] the quality and independence of the student's research briefing, [2] the use and understanding of physics demonstrated, and [3] the selection, summarizing, explanation, and [4] understanding/critical thinking shown in the student's work. Scores from 1-5 are given for each criterion, with 5 being the highest score. The form also includes the student's name and ID number for record keeping purposes.
Booklet
1. The document provides guidance for students on completing a research briefing on a topic of their choosing in physics.
2. Students are instructed to independently research their topic from a variety of sources, consider the social or historical context of the physics, and communicate their findings in a 2000 word written report.
3. The document offers advice on choosing a suitable narrow but exploratory topic, conducting independent research, citing sources, and knowing when to stop research and begin writing their report.
More from mrrayner (20)
Recently uploaded
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
(A Free eBook comprising 3 Sets of Presentation of a selection of Puzzles, Brain Teasers and Thinking Problems to exercise both the mind and the Right and Left Brain. To help keep the mind and brain fit and healthy. Good for both the young and old alike.
Answers are given for all the puzzles and problems.)
With Metta,
Bro. Oh Teik Bin ๐๐ค๐ค๐ฅฐ
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfย
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as discipline
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the bodyโs response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
How to Download & Install Module From the Odoo App Store in Odoo 17
Custom modules offer the flexibility to extend Odoo's capabilities, address unique requirements, and optimize workflows to align seamlessly with your organization's processes. By leveraging custom modules, businesses can unlock greater efficiency, productivity, and innovation, empowering them to stay competitive in today's dynamic market landscape. In this tutorial, we'll guide you step by step on how to easily download and install modules from the Odoo App Store.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
How to Fix [Errno 98] address already in use
This slide will represent the cause of the error โ[Errno 98] address already in useโ and the troubleshooting steps to resolve this error in Odoo.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!ย
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
(๐๐๐ ๐๐๐) (๐๐๐ฌ๐ฌ๐จ๐ง ๐)-๐๐ซ๐๐ฅ๐ข๐ฆ๐ฌ
๐๐ข๐ฌ๐๐ฎ๐ฌ๐ฌ ๐ญ๐ก๐ ๐๐๐ ๐๐ฎ๐ซ๐ซ๐ข๐๐ฎ๐ฅ๐ฎ๐ฆ ๐ข๐ง ๐ญ๐ก๐ ๐๐ก๐ข๐ฅ๐ข๐ฉ๐ฉ๐ข๐ง๐๐ฌ:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
๐๐ฑ๐ฉ๐ฅ๐๐ข๐ง ๐ญ๐ก๐ ๐๐๐ญ๐ฎ๐ซ๐ ๐๐ง๐ ๐๐๐จ๐ฉ๐ ๐จ๐ ๐๐ง ๐๐ง๐ญ๐ซ๐๐ฉ๐ซ๐๐ง๐๐ฎ๐ซ:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Recently uploaded (20)
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
A Free 200-Page eBook ~ Brain and Mind Exercise.pptx
ย
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...
CHUYรN ฤแป รN TแบฌP Vร PHรT TRIแปN CรU HแปI TRONG ฤแป MINH HแปA THI TแปT NGHIแปP THPT ...
ย
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
Geography as a Discipline Chapter 1 __ Class 11 Geography NCERT _ Class Notes...
ย
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
ย
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
ย
How to Download & Install Module From the Odoo App Store in Odoo 17
How to Download & Install Module From the Odoo App Store in Odoo 17
ย
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
ย
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
ย
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptx
ย
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) Curriculum
ย
6.5 Bending light beams
- 1. 17 October 2010 6.5 Bending light beams Explain refraction using the model of a car going from a road to grass
- 2. Aims Explain what happens to light when crossing a boundary Describe how optical fibres work Relate the colour of light to its frequency
- 5. ฮธ
- 13. Questions Read pg 158 and 159 and answer question 1