This document provides wiring configuration and DIP switch settings for two setup options of a VS520DZ 4.0kW spa system. Setup 1 wires the system with a 2-speed pump and stereo audio, while Setup 2 wires for a 2-speed pump and circulation pump with stereo audio. Key differences between the setups involve wiring for different pumps and setting the DIP switches for circulation pump operation.
This document provides technical specifications for the EL8000 Mach 3 spa control system. It includes the model number, software version, and component part numbers. The document also describes the basic features and functions of the system, including power requirements, outputs, and optional devices. It provides information on setup, programming, and wiring configuration.
The document provides technical specifications for the Balboa VS525Z system. Key details include:
- Model number VSP-VS525-BCAH and software version 43
- Compatible base panels and required auxiliary panel
- Wiring diagrams and DIP switch settings for two setup configurations
- Features like persistent memory reset process and power up display sequence
This document provides technical specifications and information for the Balboa Instruments VS515Z spa control system. It includes details on the system model number, software version, base PCBA and panels used. Wiring diagrams and descriptions of features such as power requirements, outputs, and dip switch settings are also provided. Instructions for resetting persistent memory and guidelines for safe ozone generator connections are outlined.
This document provides technical specifications for the Balboa Instruments VS520SZ pool and spa control system. It includes the model number, software version, and component part numbers. The basic system features include power requirements, outputs, and optional devices. The document also provides an overview of the power up display sequence and resetting persistent memory.
This document provides technical specifications for the Balboa Instruments VS520DZ pool and spa control system. It includes information on the system model number, software version, and electronic printed circuit board. It also provides details on system wiring configuration and dip switch settings, basic features and functions, and revision history.
This document provides technical specifications for the EL8000 Mach 3 spa control system. It includes:
- The model and software version numbers for the system and its components.
- An overview of the basic system features, including power requirements, outputs, and optional devices.
- Instructions for resetting persistent memory to allow changes to DIP switch or software configuration settings.
- Details on the system's startup display sequence and how it indicates the software version, heater wattage, and other settings.
- Diagrams showing the wiring configuration and functions of the DIP switches on switchbanks A and B.
- Definitions of what each DIP switch controls, such as time
This document provides information about a VS511Z hot tub system from Balboa Instruments, including:
- The system model number, software version, and other identifying information.
- A list of compatible base and display panel parts.
- A revision history showing past software updates.
- An overview of basic system features like power requirements and outputs.
- A diagram labeling system components.
This document provides technical specifications for the Balboa Instruments VS511SZ pool and spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure the system for different features and functions. Guidelines are provided for resetting persistent memory and setting the voltage output for ozone connections.
This document provides technical specifications for the EL8000 Mach 3 spa control system. It includes the model number, software version, and component part numbers. The document also describes the basic features and functions of the system, including power requirements, outputs, and optional devices. It provides information on setup, programming, and wiring configuration.
The document provides technical specifications for the Balboa VS525Z system. Key details include:
- Model number VSP-VS525-BCAH and software version 43
- Compatible base panels and required auxiliary panel
- Wiring diagrams and DIP switch settings for two setup configurations
- Features like persistent memory reset process and power up display sequence
This document provides technical specifications and information for the Balboa Instruments VS515Z spa control system. It includes details on the system model number, software version, base PCBA and panels used. Wiring diagrams and descriptions of features such as power requirements, outputs, and dip switch settings are also provided. Instructions for resetting persistent memory and guidelines for safe ozone generator connections are outlined.
This document provides technical specifications for the Balboa Instruments VS520SZ pool and spa control system. It includes the model number, software version, and component part numbers. The basic system features include power requirements, outputs, and optional devices. The document also provides an overview of the power up display sequence and resetting persistent memory.
This document provides technical specifications for the Balboa Instruments VS520DZ pool and spa control system. It includes information on the system model number, software version, and electronic printed circuit board. It also provides details on system wiring configuration and dip switch settings, basic features and functions, and revision history.
This document provides technical specifications for the EL8000 Mach 3 spa control system. It includes:
- The model and software version numbers for the system and its components.
- An overview of the basic system features, including power requirements, outputs, and optional devices.
- Instructions for resetting persistent memory to allow changes to DIP switch or software configuration settings.
- Details on the system's startup display sequence and how it indicates the software version, heater wattage, and other settings.
- Diagrams showing the wiring configuration and functions of the DIP switches on switchbanks A and B.
- Definitions of what each DIP switch controls, such as time
This document provides information about a VS511Z hot tub system from Balboa Instruments, including:
- The system model number, software version, and other identifying information.
- A list of compatible base and display panel parts.
- A revision history showing past software updates.
- An overview of basic system features like power requirements and outputs.
- A diagram labeling system components.
This document provides technical specifications for the Balboa Instruments VS511SZ pool and spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure the system for different features and functions. Guidelines are provided for resetting persistent memory and setting the voltage output for ozone connections.
This document provides technical specifications and information for the Balboa Instruments VS510SZ pool and spa control system. It includes the model number, software version, and other identifying information. wiring diagrams and instructions are provided showing how to configure dip switches and connect components like pumps, lights, and an ozone generator. Instructions are also given on resetting persistent memory when changing dip switch settings.
This document provides technical specifications and wiring information for the Balboa Instruments VS503SZ system. Key details include:
- The system model is a VSP-VS503SZ-DCAH with software version 43.
- It lists the main PCBA, PCB, and base panel part numbers.
- Wiring diagrams and descriptions are provided for the standard configuration including power requirements, outputs, optional devices, and dip switch settings.
- Instructions for resetting persistent memory and details on time of day retention are included.
- Guidelines are given for ozone connections and changing the voltage output.
This document provides information about a VS514SZ hot tub system including:
- The system model number and software version
- A list of parts included in the system
- An overview of basic system features like power requirements, outputs, and optional devices
- Details on resetting persistent memory to update DIP switch settings
This document provides a tech sheet for the VS504SZ system with software version 43. It includes information about the system model, base PCBA, panels, and features. The document also provides wiring diagrams and explanations of DIP switch settings and jumper configurations for the system.
This document provides technical specifications for the VS504SZ pool and spa control system. It includes information about the system model number, software version, and electrical pinouts. The document also details wiring configurations, dip switch settings, and connections for optional devices like ozone generators.
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
This document provides a tech sheet for the Balboa Instruments VS511SZ system. It lists the system model number and software version, as well as part numbers for components like the base PCBA, panels, and heater. It also provides a revision history, lists basic system features and functions, and describes the power up display sequence and how to reset persistent memory.
This document provides specifications for the Balboa GS525Z spa control system. Key details include:
- The system model is a GS5-GS525Z-RCA-3.0K with software version 43.
- It requires a base PCBA and PCB as well as panels for different spa models.
- The basic system features include power requirements, outputs, and additional optional devices.
- Wiring configurations and DIP switch settings are outlined for setups 1 and 2, showing connections for heaters, pumps, blowers, and other devices.
This document provides technical specifications for the Balboa Instruments GS520DZ spa control system. It includes information about the system model number, software version, and component part numbers. Wiring diagrams and dip switch settings are shown for two different spa equipment setup configurations. Persistent memory and how to reset it are also described.
This document provides information on the GS504SZ control system, including:
- The system model number and software version
- A list of included components and their part numbers
- A history of software updates to the system
- Descriptions of basic system features and functions
- Wiring configuration and DIP switch settings for setup
- Electrical service configuration options
This document provides information on Balboa Instruments system model GS5-GS504SZ-RCA-3.0, including:
- The system model number, software version, and equipment part numbers.
- A revision history showing a software update.
- Basic system features like power requirements, outputs, and optional devices.
- Wiring configuration and DIP switch settings for the system.
- Electrical service configuration options.
This document provides details on the VS501Z hot tub control system from Balboa Instruments, including:
- The system model number, software version, and EPN number
- Details on the base PCBA and panels that can be used
- A diagram of the basic system features and connections
- Instructions for resetting persistent memory after changing DIP switch settings
This document provides information on the GS514SZ spa control system, including:
- The model and software version numbers
- Details on the base PCBA, PCB, and panels used
- A history of software updates to the system
- An overview of the basic system features, functions, and optional devices
- Instructions for resetting persistent memory after changing DIP switch settings
- Notes on power requirements and system outputs
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
This document provides information about the VS500Z hot tub control system from Balboa Instruments. It lists the system model and software version, compatible base panels and optional equipment. It also includes a basic overview of system features, functions, and power requirements. The revision history shows software updates over time.
This document provides a tech sheet for the Balboa Instruments GS501SZ system. It includes information on the system model number, software version, and electrical pinout board (EPN). The document also provides details on system features, wiring configuration, dip switch settings, and electrical service options.
This document is a technical sheet for the VS500Z 120V GFCI spa system. It provides details on the system model number, software version, and component part numbers. It also lists the basic features and functions of the system, including power requirements, outputs, optional devices, and a diagram of the circuit board labels. The system revision history is given, showing changes made with different software updates.
This document provides a technical sheet for the Balboa Instruments GS520DZ system. It includes information on the system model and software version, as well as the base PCBA and PCB used. It also lists the basic system features and functions, wiring configuration and DIP switch settings for two setup options, and a revision history for the system software.
This document provides installation instructions for Balboa SUV series power systems for portable spas. It includes important safety instructions, an overview of system configurations, considerations for installation such as ventilation and drainage requirements, instructions for installing power system components like pumps and air blowers, and electrical connection details. The document also includes a warranty and technical support information.
This document summarizes the technical specifications of the GS501Z control system from Balboa Instruments, including:
- The model number, software version, and other identifying information.
- The included base panels and optional panels that can be used.
- A system revision history and template used.
- Basic system features such as power requirements, outputs, and optional devices.
- Wiring configuration details including DIP switch settings.
- Electrical service configuration options.
The document contains contact information for a company called MyPoolSpas.com that sells wholesale pool and spa parts, including their website address http://www.MyPoolSpas.com and phone number 920-925-3094. This information is repeated across multiple lines.
This document provides technical specifications and information for the Balboa Instruments VS510SZ pool and spa control system. It includes the model number, software version, and other identifying information. wiring diagrams and instructions are provided showing how to configure dip switches and connect components like pumps, lights, and an ozone generator. Instructions are also given on resetting persistent memory when changing dip switch settings.
This document provides technical specifications and wiring information for the Balboa Instruments VS503SZ system. Key details include:
- The system model is a VSP-VS503SZ-DCAH with software version 43.
- It lists the main PCBA, PCB, and base panel part numbers.
- Wiring diagrams and descriptions are provided for the standard configuration including power requirements, outputs, optional devices, and dip switch settings.
- Instructions for resetting persistent memory and details on time of day retention are included.
- Guidelines are given for ozone connections and changing the voltage output.
This document provides information about a VS514SZ hot tub system including:
- The system model number and software version
- A list of parts included in the system
- An overview of basic system features like power requirements, outputs, and optional devices
- Details on resetting persistent memory to update DIP switch settings
This document provides a tech sheet for the VS504SZ system with software version 43. It includes information about the system model, base PCBA, panels, and features. The document also provides wiring diagrams and explanations of DIP switch settings and jumper configurations for the system.
This document provides technical specifications for the VS504SZ pool and spa control system. It includes information about the system model number, software version, and electrical pinouts. The document also details wiring configurations, dip switch settings, and connections for optional devices like ozone generators.
This document provides technical specifications for the Balboa Instruments GS510DZ spa control system. It lists the model number, software version, and component part numbers. The system requires a PCB revision B and has outputs that can control pumps, lights, auxiliaries, and optional devices. It also describes basic features like power requirements and the power up display sequence.
This document provides a tech sheet for the Balboa Instruments VS511SZ system. It lists the system model number and software version, as well as part numbers for components like the base PCBA, panels, and heater. It also provides a revision history, lists basic system features and functions, and describes the power up display sequence and how to reset persistent memory.
This document provides specifications for the Balboa GS525Z spa control system. Key details include:
- The system model is a GS5-GS525Z-RCA-3.0K with software version 43.
- It requires a base PCBA and PCB as well as panels for different spa models.
- The basic system features include power requirements, outputs, and additional optional devices.
- Wiring configurations and DIP switch settings are outlined for setups 1 and 2, showing connections for heaters, pumps, blowers, and other devices.
This document provides technical specifications for the Balboa Instruments GS520DZ spa control system. It includes information about the system model number, software version, and component part numbers. Wiring diagrams and dip switch settings are shown for two different spa equipment setup configurations. Persistent memory and how to reset it are also described.
This document provides information on the GS504SZ control system, including:
- The system model number and software version
- A list of included components and their part numbers
- A history of software updates to the system
- Descriptions of basic system features and functions
- Wiring configuration and DIP switch settings for setup
- Electrical service configuration options
This document provides information on Balboa Instruments system model GS5-GS504SZ-RCA-3.0, including:
- The system model number, software version, and equipment part numbers.
- A revision history showing a software update.
- Basic system features like power requirements, outputs, and optional devices.
- Wiring configuration and DIP switch settings for the system.
- Electrical service configuration options.
This document provides details on the VS501Z hot tub control system from Balboa Instruments, including:
- The system model number, software version, and EPN number
- Details on the base PCBA and panels that can be used
- A diagram of the basic system features and connections
- Instructions for resetting persistent memory after changing DIP switch settings
This document provides information on the GS514SZ spa control system, including:
- The model and software version numbers
- Details on the base PCBA, PCB, and panels used
- A history of software updates to the system
- An overview of the basic system features, functions, and optional devices
- Instructions for resetting persistent memory after changing DIP switch settings
- Notes on power requirements and system outputs
This document provides technical specifications for the Balboa Instruments GS5-GS514SZ-RCA-3.0 pool/spa control system. It includes information on the system model number, software version, and electrical components. The document also details the system's basic features and functions, wiring configuration, dip switch settings, and electrical service options.
This document provides information about the VS500Z hot tub control system from Balboa Instruments. It lists the system model and software version, compatible base panels and optional equipment. It also includes a basic overview of system features, functions, and power requirements. The revision history shows software updates over time.
This document provides a tech sheet for the Balboa Instruments GS501SZ system. It includes information on the system model number, software version, and electrical pinout board (EPN). The document also provides details on system features, wiring configuration, dip switch settings, and electrical service options.
This document is a technical sheet for the VS500Z 120V GFCI spa system. It provides details on the system model number, software version, and component part numbers. It also lists the basic features and functions of the system, including power requirements, outputs, optional devices, and a diagram of the circuit board labels. The system revision history is given, showing changes made with different software updates.
This document provides a technical sheet for the Balboa Instruments GS520DZ system. It includes information on the system model and software version, as well as the base PCBA and PCB used. It also lists the basic system features and functions, wiring configuration and DIP switch settings for two setup options, and a revision history for the system software.
This document provides installation instructions for Balboa SUV series power systems for portable spas. It includes important safety instructions, an overview of system configurations, considerations for installation such as ventilation and drainage requirements, instructions for installing power system components like pumps and air blowers, and electrical connection details. The document also includes a warranty and technical support information.
This document summarizes the technical specifications of the GS501Z control system from Balboa Instruments, including:
- The model number, software version, and other identifying information.
- The included base panels and optional panels that can be used.
- A system revision history and template used.
- Basic system features such as power requirements, outputs, and optional devices.
- Wiring configuration details including DIP switch settings.
- Electrical service configuration options.
The document contains contact information for a company called MyPoolSpas.com that sells wholesale pool and spa parts, including their website address http://www.MyPoolSpas.com and phone number 920-925-3094. This information is repeated across multiple lines.
This document provides a technical service manual for troubleshooting and repairing Balboa M-7 spa control systems. It includes safety tips, descriptions of system components, procedures for checking wiring and voltages, troubleshooting guidance for issues like low voltage or panel messages, and instructions for testing components and replacing circuit boards. The manual is intended for qualified service technicians to aid in repairing spas.
This document provides installation instructions for an air series pool and spa control system. It covers considerations for installation location and plumbing, how to connect system components, electrical installation procedures, special considerations for lights, blowers, startup and pressure switch adjustment. Troubleshooting tips are also mentioned. The document includes diagrams of the control system and component connection colors. Installation must be done by a licensed electrician according to all applicable electrical codes.
The document provides installation and operation instructions for a Platinum Series pool and spa control system. It includes details on installing remote heaters, electrical connections, temperature sensors, equipment connections, and programming filtration settings. Safety instructions are provided at the beginning regarding proper installation and use of the system.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms for those who already suffer from conditions like depression and anxiety.
This document provides specifications for the Balboa VS523DZ spa system. It includes the model number, software version, and component part numbers. The document also lists the basic system features, including power requirements, output devices, and optional equipment. Wiring diagrams and DIP switch settings are provided for two different output device configurations.
The document repeatedly lists the website http://www.MyPoolSpas.com and a phone number, 920-925-3094. It appears to advertise that MyPoolSpas.com is a wholesaler of pool and spa parts that can be contacted by phone at 920-925-3094.
This document provides contact information for a wholesale pool and spa parts business called MyPoolSpas.com, including their website address http://www.MyPoolSpas.com and phone number 920-925-3094. The business sells pool and spa parts wholesale.
This document provides instructions for programming and operating an 8600 series spa control system. It describes how to adjust the current limiting and fiber optic settings in the low-level programming mode. It also summarizes the basic functions of the control panel keys and icons for operating pumps, blowers, lights, temperatures, and programming filter cycles and economy modes. Finally, it lists some error messages that may appear and appropriate responses.
This document provides technical specifications and setup information for the EL2KGAS Mach 3 gas heater control system. It includes the system model number, software version, part numbers, wiring diagrams, and DIP switch settings for two different configurations (setups). Revision history and basic features are also outlined.
This document provides information about the VS513Z hot tub system from Balboa Instruments including:
- The system model number, software version, and other identifying information.
- A list of components included in the system.
- Instructions for resetting persistent memory and an explanation of time retention.
- Wiring diagrams and explanations of dip switch and jumper settings.
- Information on optional devices and connections like the ozone generator.
This document provides technical specifications for the Balboa Instruments VS520SZ pool and spa control system. It includes information about the system model number, software version, and electrical panel number. The document also provides details about system features, wiring configuration, dip switch settings, and ozone connections.
This document provides technical specifications for the Balboa Instruments VS510SZ spa control system. It includes the model number, software version, and other component details. Wiring diagrams and dip switch settings are shown to configure pumps, heating, and other functions. Guidelines are provided for resetting persistent memory and basic system operation.
This document provides technical specifications for the Balboa Instruments VS510SZ pool and spa control system. It includes information about the system model and software version, compatible base panels and boards, a system revision history, basic features and functions, wiring configuration and DIP switch settings, and descriptions of auxiliary panel connections and ozone connections. The high-level purpose is to provide details needed for installation and operation of the VS510SZ pool and spa control system.
This document provides technical specifications and wiring information for the VS500Z 120V GFCI spa control system from Balboa Instruments. Key details include:
- The system model number is VSP-VS500Z-FCAH and the software version is 43.
- It provides wiring diagrams and definitions for the DIP switches and jumpers that configure the system operation and components.
- Instructions are included for resetting persistent memory to allow new DIP switch settings to take effect and troubleshooting power up sequences.
The document provides specifications for the Balboa Instruments VS500Z hot tub control system. Key details include:
- Model and software version numbers
- Compatible components like the main circuit board, display panels, and heater
- Wiring diagrams and DIP switch settings for two equipment configurations
- An overview of features and basic operation
The document provides specifications for the Balboa Instruments VS500Z hot tub control system. Key details include the system model number, software version, and optional panels. Wiring diagrams and DIP switch settings are shown for two possible configurations (setups 1 and 2) of the control system. Troubleshooting tips are provided, such as how to reset persistent memory by jumping J43 when changing DIP switch settings.
This document provides technical specifications for the Balboa Instruments GS501Z pool and spa control system. It includes the system model number, software version, and electrical part numbers. Wiring diagrams and dip switch settings are provided to configure the system for different components. Optional display panels, heaters, pumps and other accessories are also listed.
This document provides specifications and configuration details for the Balboa Instruments VS501Z3K hot tub control system. It lists the system model and software version, compatible base panels and optional equipment. The second page describes the system's basic features and functions. Subsequent pages detail the wiring configuration and DIP switch settings for two setup examples.
The document provides specifications and configuration details for the Balboa Instruments VS501Z hot tub control system. It lists the system model and software version, compatible components, wiring diagrams and DIP switch settings for two example configurations. Basic features and functions of the control system are also outlined, including power requirements, system outputs, and optional devices.
This document provides information about the VS501Z hot tub system. It lists the system model number and software version, as well as compatible base panels and optional devices. It also includes a system revision history, descriptions of basic features and functions, and diagrams of system components. Safety instructions and troubleshooting tips are provided.
This document provides technical specifications for the Balboa Instruments GS520SZ pool and spa control system. It lists the system model number and software version, along with part numbers for components. System features include outputs for pumps, blowers, lights, and other devices. The document also describes power requirements and the startup display sequence when power is applied.
This document provides technical specifications and configuration details for the Balboa Instruments GS501SZ pool and spa control system. It lists the system model number, software version, and electrical component part numbers. Wiring diagrams and DIP switch settings are provided for the standard configuration with options for alternative setups. Troubleshooting tips and specifications for optional equipment are also included.
This document provides technical specifications for the Balboa Instruments GS520SZ spa control system. It includes the system model number, software version, and component part numbers. Wiring diagrams and DIP switch settings are provided for two different spa equipment setup configurations.
This document provides technical specifications for the GS513Z pool and spa control system. It includes information about the system model number, software version, and electrical power requirements. Wiring diagrams and instructions are provided for configuring the system outputs and optional devices. Dip switch settings and jumper definitions are defined to configure the system operation.
This document provides a technical specification sheet for a Balboa Instruments GS510SZ pool and spa control system. It includes details on the system model number, software version, and component part numbers. It also provides information on basic system features, wiring configuration and DIP switch settings, and diagrams of the control board and connector labels.
This document provides a technical sheet for the VS501SZ spa system. It includes information about the system model number, software version, and component part numbers. It also details the basic system features, wiring configuration, dip switch settings, and ozone connections for the spa system.
This document provides instructions for adjusting various settings on a spa control panel, including temperature unit (F or C), time of day, economy mode start time and duration, panel lock, and descriptions of default settings and modes like economy mode and freeze protection. Settings are adjusted using the program, list, enter and up/down arrow keys, and confirmed with enter. Error codes are displayed as flashing dots and require servicing.
The document provides instructions for operating various functions of a spa or hot tub. It describes the economy mode which maintains water temperature 20°F below the set point. It also describes the freeze protection mode which activates the pump and heater if water drops below certain temperatures. Default settings are described such as filtration cycles running for 1 hour every 24 hours with water at 95°F. Instructions are provided for operating pumps, blowers, lights and setting the temperature. Error codes and troubleshooting tips are also summarized.
This document provides installation and operation instructions for a PS-9704 series pool/spa control system. It includes guidelines for installing remote heaters, making electrical and wet connections, programming filtration settings, and troubleshooting. Safety precautions are outlined, and a wiring diagram and parts list are provided.
The document provides installation instructions for PS-6502 & PS-6503 Platinum Series pool and spa control systems. It describes how to install the heater in different locations including on the bottom, back, or top of the control box using adjustable clamps or slide brackets. The instructions also cover electrical installation, temperature sensor placement, equipment connections, and programming filtration settings. Additional sections provide details on optional equipment, operational considerations, troubleshooting, and warranty information.
The document provides information on the default system operation, freeze protection modes, high temperature error handling, filtration cycles, pump and blower controls, light controls, temperature setting, and error identification for a spa or pool system. When power is applied, the system will initiate a default 24-hour filtration cycle at 95°F. It describes two modes of freeze protection below 59°F and 49°F and will suspend filtration if temperatures exceed 115°F or reach errors.
The document provides instructions for operating and programming a spa, including:
- If the water temperature exceeds 115°F, the heater will turn off, and above 122°F all outputs will disable until cooled.
- The filtration cycle can be programmed to run 1, 2, or 3 times daily for 60, 120, 180, or 480 minutes each cycle.
- By default, the spa will filter for 1 hour every 24 hours, maintaining the temperature at 95°F.
- Instructions are provided for operating the pump, accessory, light, and adjusting the temperature settings.
- The system enters a freeze protection mode if the temperature drops below 59°F by turning the pump on periodically.
The document provides instructions for operating and programming a spa control system. It describes how the system handles high temperatures, allows setting filter cycles for 1-3 times daily and durations of 60-180 minutes, and will default to a 24-hour filter cycle at 95°F if power is lost. It also explains how to operate the pump, light, and change the temperature setting, and describes freeze protection and error identification features.
This document summarizes the revision history of PCB part number 33-0024-Rx from the initial R0 revision in January 1999 through the current R6 revision. It describes the changes made at each revision level such as PCB layout changes, software changes, additions of memory and removal of features. It also provides information to help identify the correct wiring diagram for a given revision level.
This document provides instructions for an Eco 1 timed filtration system. It states to press and hold the light button to change the duration of filtration, and to press and hold the pump button to change the number of times filtration will occur. It also provides contact information for My Pool and Spas, a wholesale pool and spa parts supplier.
The document provides instructions for setting various operating parameters of a pool or spa control system including time, filtration start/duration, temperature display units, panel lock, economy mode, freeze protection, and error conditions. It describes pressing the program key to access each setting and using up/down arrows to adjust before pressing program to save. It also lists default settings if power is lost.
The changes include:
- Two programmable filtration cycles, one for AM and one for PM.
- A new "Smart Summer Mode" that operates pumps and chlorinators during cooler times when temperatures exceed a threshold.
- Optional programming via Palm Pilot or keypad.
- New auxiliary circuit and circulation pump options.
- Updated owner's manuals to reflect changes.
This document provides contact information for a wholesale pool and spa parts business called MyPoolSpas.com. It lists their phone number as 920-925-3094. The business sells wholesale pool and spa parts.
This document provides contact information for a company called MyPoolSpas.com Spa Parts Wholesale Pool. They sell pool and spa parts and can be reached by calling 920-925-3094. The document lists the name of the company and their phone number.
The document provides instructions for programming various settings on an HT-2 / 9600 Series spa control system, including time of day, filtration cycle start time and duration, economy mode start time and duration, temperature units (Fahrenheit or Celsius), and a spa-side lock feature. It also describes low level programming options that can be changed by positioning jumpers on the system board, including pump, blower, light, ozone, fiber optics, clock, current, circulation pump, and sensor calibration settings.
The document discusses four jumpers on a system board that can be positioned to change parameters of an equipment system. Jumper 1 sets either a high or low current limit. Jumper 2 selects whether temperature is displayed in Fahrenheit or Celsius. Jumpers 3 and 4 determine if the pumps run as single or two speed pumps. Positioning the jumpers allows customizing the system's operation based on electrical specifications and pump configuration.
This document provides instructions for operating an infrared remote control for a pool or spa. It includes:
1. A key chart explaining the functions of each button on the remote control.
2. Instructions for programming the remote to control up to three home entertainment or automation devices by entering their unique four-digit codes.
3. Procedures for replacing batteries, searching for codes if a device is not responding, checking stored codes, and putting the remote into learning mode to add new functions from an original remote control.
The document provides instructions for programming a Palm Pilot PDA to communicate with and adjust the low-level programming of Hydro-Quip control systems. The PDA must have the Serve-Soft 2 software installed and unlocked using the username "Hydro-Quip" and password "Hq92u1". An ADIR-1 cartridge is used to connect the PDA to the control system. Low-level parameters can then be viewed and modified on the PDA screen by tapping selections. Additional features like current states, troubleshooting, and documentation can also be accessed.
This document provides a template for installing spaside controls for pool and spa equipment. The template is only to be used with ECO-1, 2, 5, and 6 series controls and measures 2 5/8 inches by 2 5/8 inches with two 1 inch holes. Installers are directed to refer to the installation manual for details on installation.
1. VS520DZ 4.0kW Tech Sheet
Balboa
System PN 55663
System Model # VSP-VS520DZ-BCAJ
Software Version # 43
EPN # 3136
Base PCBA - PN 55152-01
PCB VS500Z - PN 22972 Rev E
Base Panels
VL801D (Serial Deluxe) – PN 54108
VL802D – PN 54528
Template used: 40600_S.pdf 11/172008
55663_97_A.pdf 02/17/2009
Page 1 55663_97_A
2. System Revision History
System PN EPN Date Requested By Changes Made
55663 3136 02.17.2009 Balboa New System.
Page 2 55663_97_A
3. Basic System Features and Functions
Power Requirements
System Outputs
Setup 1 (As Manufactured)
(Stereo)
FUSE
Additional Options K8 W2
K5
W3
J1 J1A
J10
J2A
J18
2 3
1
U4 J12
J2
J13
BALBOA INSTRUMENTS, INC. 2-SPD
J60 J22 J44 VS500Z EXT RLY
J7 J8
P/N 22972 REV D
EXT. AUX. F VAC MADE IN U.S.A
RLY SEN. A SEN. B COPYRIGHT 2005
Page 3 55663_97_A
4. Basic System Features and Functions
Power Requirements
System Outputs
Setup 2
(Stereo)
FUSE
Additional Options K8 W2
K5
W3
J1 J1A
J10
J2A
J18
2 3
1
U4 J12
J2
J13
BALBOA INSTRUMENTS, INC. 2-SPD
J60 J22 J44 VS500Z EXT RLY
J7 J8
P/N 22972 REV D
EXT. AUX. F VAC MADE IN U.S.A
RLY SEN. A SEN. B COPYRIGHT 2005
Page 4 55663_97_A
6. Wiring Configuration and DIP Settings
Setup 1 (As Manufactured)
(Stereo)
PCBA Rev D & E only.
Black jumper required. Ozone and Circ Pump must be same voltage.
Do not remove. Do not remove Fuse F7 (20A)
K1 F7 FUSE 20A 250V J47
J46
W10 J29
CLASS G FUSE 30A BLK AC K6 J23 J50
F5 J61 J62 J74
F1
Audio Visual
2-Spd P1
J20
J17/26
Ozone
Blower
Blower
0V
WHT AC
T
C
J73
Light
C
C
12V
C
C
C
G
G
W7
W4
G
G
G
J11 J15 J16 J25 J63 J64
J66 J65
W1 K8 K5
W2
T1 K9 W3
NEUTRAL
F4 FUSE .3A 250V
J1 J1A
WHITE
J10
BLACK
HOT
J2A
VS51x mode
J18
TORQUE
RANGE
RED
HOT
2 3
FOR TB1: K3 1
K4 27-30 IN. LBS. U4 J12
K2
TB1 J2
J32 J33 J34 J35 J43
J36 J37 F2
RED AC J13
BALBOA INSTRUMENTS, INC. 2-SPD
J60 J22 J44 VS500Z EXT RLY
J7 J8
Balboa HTR2 HTR1 J6
E.GND
P/N 22972 REV D
J100 J101 S1 TST EXT. AUX. F VAC MADE IN U.S.A
SWITCHBANK A RLY SEN. A SEN. B COPYRIGHT 2005
Heater rated @ 240V
4.0 kW (Approx. 1.4kW @ 120V)
X-P332
PN 55137 J7
J1 Note:
2-Spd P2
2-Spd P2
R
P/N 22909 REV B
W1
B
J6
W G
F30A 480V
WARNING: Main Power to system should be turned OFF BEFORE adjusting DIP switches.
WARNING: Persistent Memory (J43) must be RESET to allow new DIP switch settings to take effect. (See Persistent Memory page)
VS51x/VS5xxS/VS5xxD
SSID #
Wiring Color Key
Compatible
120 Volt Connections
100 J12 240 Volt Connections
94 1 2 3 Black AC Jumpers
43 12 Volt Connections
A1, Test Mode OFF
Relay Control Wires
A2, See Table 1 Enabled
A7, J17/26 Disabled
A3, N/A J43 Board Connector Key
Memory
A9, Non-Circ Mode
A5, 2-speed P1 Reset 1 Typically Line voltage
A10, See Table 1
2 Typically Line voltage for 2-speed pumps
Panel Button Assignments Panel Button Positions 3 Neutral (Common)
1=Time 5=Light
1 3 8 5 4 Ground
2=Mode/Prog 6=Pump 1
3=Temp Up 7=Pump 2 2 4 6 7 Note flat sides in connector
4=Temp Down 8=Unused
8=J17/26
Page 6 55663_97_A
7. Wiring Configuration and DIP Settings
Setup 2
(Stereo)
PCBA Rev D & E only.
Black jumper required. Ozone and Circ Pump must be same voltage.
Do not remove. Do not remove Fuse F7 (20A)
K1 F7 FUSE 20A 250V J47
J46
W10 J29
CLASS G FUSE 30A BLK AC K6 J23 J50
F5 J61 J62 J74
Circ.Pump
F1
Audio Visual
Audio Visual
2-Spd P1
J20
J17/26
Ozone
Blower
Blower
0V
WHT AC
T
C
J73
Light
C
C
12V
C
C
C
G
G
W7
W4
G
G
G
J11 J15 J16 J25 J63 J64
J66 J65
W1 K8 K5
W2
T1 K9 W3
NEUTRAL
F4 FUSE .3A 250V J1A
WHITE
J1
J10
BLACK
HOT
J2A
VS51x mode
J18
TORQUE
RANGE
RED
HOT
2 3
FOR TB1: K3 1
K4 27-30 IN. LBS. U4 J12
K2
TB1 J2
J32 J33 J34 J35 J43
J36 J37 F2
RED AC J13
BALBOA INSTRUMENTS, INC. 2-SPD
J60 J22 J44 VS500Z EXT RLY
J7 J8
Balboa HTR2 HTR1 J6
E.GND
P/N 22972 REV D
J100 J101 S1 TST EXT. AUX. F VAC MADE IN U.S.A
SWITCHBANK A RLY SEN. A SEN. B COPYRIGHT 2005
Heater rated @ 240V
4.0 kW (Approx. 1.4kW @ 120V)
X-P332
PN 55137 J7
J1 Note:
2-Spd P2
2-Spd P2
R
P/N 22909 REV B
W1
B
J6
W G
F30A 480V
WARNING: Main Power to system should be turned OFF BEFORE adjusting DIP switches.
WARNING: Persistent Memory (J43) must be RESET to allow new DIP switch settings to take effect. (See Persistent Memory page)
VS51x/VS5xxS/VS5xxD
SSID #
Wiring Color Key
Compatible
120 Volt Connections
100 J12 240 Volt Connections
94 1 2 3 Black AC Jumpers
43 12 Volt Connections
A1, Test Mode OFF
Relay Control Wires
A2, See Table 1 Enabled
A7, J17/26 Disabled
A3, N/A J43 Board Connector Key
Memory
A9, Non-Circ3ºF Circ Pump
A9, 24 Hour Mode
A5, 2-speed P1 Reset 1 Typically Line voltage
A10, See Table 1
2 Typically Line voltage for 2-speed pumps
Panel Button Assignments Panel Button Positions 3 Neutral (Common)
1=Time 5=Light
1 3 8 5 4 Ground
2=Mode/Prog 6=Pump 1
3=Temp Up 7=Pump 2 2 4 6 7 Note flat sides in connector
4=Temp Down 8=Unused
8=J17/26
Page 7 55663_97_A
8. DIP Switches and Jumpers Definitions
SSID 100 94 43 Base Model VS520DZ
DIP Switch Key
A1 Test Mode (normally OFF)
A2+A10 Control amp draw requirements (See Table 1) Table 1 # of Hi-Speed
A3 N/A (must be OFF) Pumps/Blower
A4 Aux Freeze (must be OFF) Before Heat Disabled
A5+A9 Pump 1 speeds and Circ Modes: A2 A10
A5 A9 Circ Mode Pump 1 Speed OFF OFF 0
OFF OFF Non-circ 2-speed ON OFF 1
ON OFF Circ "acts like Pump 1 low" (filters/polls/ect) 1-speed OFF ON 2
OFF ON 24 hours with 3°F shut-off 1-speed ON ON 3
ON ON 24 hours with 3°F shut-off 2-speed
A6 “ON” position: 50Hz operation
“OFF” position: 60Hz operation Alert:
A7 “ON” position: J17/26 Enabled for Blower or 1-speed Pump 3. 2-speed Pump 2 is required, uses
“OFF” position: J17/26 Disabled. X-P332 expander board.
A8 “ON” position: temperature is displayed in degrees Celsius To add Blower or 1-speed Pump 3,
“OFF” position: temperature is displayed in degrees Fahrenheit use J17/26.
Jumper Key
J12 Factory set. DO NOT MOVE.
Jumper must be on Pins 1 and 2 for VS51xZ/VS52xZ/VS5xxSZ/VS5xxDZ software.
Jumper must be on Pins 2 and 3 for VS50xZ software.
J43 When jumper is placed on 2 pins during power-up, system will reset persistent memory.
Leave on 1 pin only to enable persistent memory feature.
WARNING:
Setting DIP switches incorrectly may cause abnormal system behavior and/or damage to system components.
Refer to Switchbank illustration on Wiring Configuration page for correct settings for this system.
Contact Balboa if you require additional configuration pages added to this tech sheet.
Panel Button Positions Aux Panel Information
1 3 8 5
Supports 2-button aux panel
2 4 6 7 VX20 6 7
Supports 4-button aux panel
Panel Button Assignments VX40D 6 7 8 5
1=Time 5=Light
2=Mode/Prog 6=Pump 1
3=Temp Up 7=Pump 2
4=Temp Down 8=J17/26 (when A7 is ON)
Page 8 55663_97_A
9. Ozone Connections
Ozone Connector Voltage: The VS500Z circuit board is factory configured to deliver a preset voltage (120V or
240V) to the on-board ozone connector (J29). See the ratings table on the wiring diagram attached to the cover
of the enclosure for the configured voltage. For 240V output W2 connects to Red AC and for 120V output W2
connects to White AC.
The voltage to the ozone connector can be changed in the field if required. W2 just needs to be set for the
required voltage.
WARNING: Changing the voltage of the ozone connector also effects the voltage supplied to the circ
pump connector (J47). Any equipment controlled by that connector may be damaged if the wrong voltage
is selected.
Balboa Ozone Generator: If the board is set up to operate a 120V ozone generator, the connector on the ozone
generator is likely to be configured correctly, but should be compared to the illustration below.
If a 240V ozone generator is required, be sure the red wire in the ozone cord is positioned in the connector next
to the green ground wire as described below.
Note: A special tool is required to remove the pins from the connector body once they are snapped in place.
Check with your Balboa Account Manager for information on purchasing a pin-removal tool.
Balboa Ozone connector configuration for 120V 60Hz B
Line - Black conductor
Use this slot for the leftover Red conductor
Common - Install the White conductor here for 120V ozone
G
Ground (Green) conductor
Flat sides of sockets as shown
Balboa Ozone connector configuration for 240V 60Hz B
Line - Black conductor
Use this slot for the leftover White conductor
Common - Install the Red conductor here for 240V ozone
G
Ground (Green) conductor
FUSE 20A 250V J47
J46
J29
Line - Black conductor
Circ.Pump
R
J20 F1 Use this slot for the leftover conductor
B
Common - Red for 240V or White for 120V ozone (See W2 wire)
Ground (Green) conductor
FUSE 3A 250V
W
Light
W
12V
W2 wire determines voltage
W
G
K8 K5
W2
W3
J1 J1A
J10
Page 9 55663_97_A
10. Serial Deluxe Panel Configurations
Time Warm Blower Light
SETUP 1
Mode/Prog Cool Jets 1 Jets 2
VL801D (Serial Deluxe)
PN 54108 with Overlay PN 10763
Connects to Main Board terminal J1 only*
Time Warm Blower Light
Mode / Prog Cool Jets 1 Jets 2
VL802D
PN 54528 with Overlay PN 11789
Connects to Main Board terminal J1 only*
* Panels with back-lighting (bulbs installed) should never be plugged into J2. Use J1 only.
If the backlight bulbs are removed, then both J1 and J2 may be used.
Page 10 55663_97_A