This document provides a parts list and specifications for an enclosed flare assembly. It lists 134 individual parts with descriptions and part numbers. The general notes specify that all inspections and welding will be done according to ASME standards, and that hydrostatic testing of the assembly will be done at 60 psi. Dimensions are in inches and the assembly is to be shop inspected before shipping.

1. 1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
1 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI
PARTS LIST
MATERIALLENGTHDESCRIPTIONPART NUMBERSTOCK NUMBERQTYITEM
Steel, Alloy1/2" Liquid-Tight Metal Conduit Fitting, 90 DEGREE7119K21011
SA-3655 inANGLE: EQUAL 1.5" X 1.5" X 0.25"L 1.5 x 1.5 x 1/4 - 54.212
ASSY: FWKO TO PUMP FOR 48" ENCLOSED FLARE SKID1800400-0713
Aluminum 6061CONNECTOR: Hazardous Location, 1/2"7862T31014
Aluminum 6061Conduit Access Port, 1/2", TEE7153K81015
SA-105ELBOW: 1" 3000# - 90° - THD26
SA-105ELBOW: 3" X 0.216WT SCH 40 STD - 90° L.R.ELL3STD90WLR17
SA-105ELBOW: 3/4" 3000# - 90° - THD58
ENCLOSED FLARE - 48" OD X 20'-0"320048019
Aluminum 6061FLAME ARRESTOR INLINE: 3" THD110
FUEL GAS SCRUBBER W/ PIPING5000302111
LEVEL CONTROL SWITCH: PNEUMATIC7400-2T112
SA-53BNIPPLE: 1" X 2"N12XH113
SA-53BNIPPLE: 1/2" X 2"214
SA 53 E/B3.5 inPIPE: 1.05 OD x 0.113 W.T., SCH 40, ASME, THD.P1S40TC115
SA-53 E/B10.5 inPIPE: 3" ND, SCH 40, THD ENDSP3S40PE116
SA-53 E/B12 inPIPE: 1" ND X 0.133WT SCH 40, ERW - ANSI B36.10117
SA-53 E/B57 inPIPE: 1" ND X 0.133WT SCH 40, ERW - ANSI B36.10118
SA-53 E/B11-1/8 inPIPE: 3" ND X 0.216WT SCH 40, ERW - ANSI B36.10 THD.119
SA-53 E/B8.5 inPIPE: 3" ND X 0.216WT SCH 40, ERW, ASME B36.10, THD120
SA-53 E/B12.750 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.121
SA-53 E/B10 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.122
SA-53 E/B15.85 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.123
SA-53 E/B3 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.124
Stainless Steel, AusteniticParker A-Lok Male Taper Thread - 90° Elbow - Fractional Tube 1/4 x 1/4225
SIGHT GLASS ASSEMBLY - 12T - 12" LG 250#1800700GC1/2250126
SS 304LSIGHT: PEEP 4" X 3"127
SKID: 6'-0" X 12'-0" 48" OD ENCLOSED FLARE1100480 612128
GenericSOLENOID: ASCO 3/2, Stainless Steel, Low Watt, 12VDC, 0.55W, Explosion
Proof with vent screen.
EF8314H301129
SUREFIRE 40W SOLAR PANEL/ENCLOSURE ASSEMBLY1300400130
PolytetrafluoroethyleneTEADIT 24B 1/2" EXPANDED PTFE SEALANT3200480-04131
SA-105UNION 3-4in THD 3000#GJU3/43M132
SA-105UNION: HAMMER 3" FIG 200 THD4513K313HU3F200233
VERTICAL FWKO: 16" OD X 36" S/S - ENCLOSED FLARE1402000134
28
9
11
30
3

2. 1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
2 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI
PARTS LIST
MATERIALLENGTHDESCRIPTIONPART NUMBERSTOCK NUMBERQTYITEM
Steel, Alloy1/2" Liquid-Tight Metal Conduit Fitting, 90 DEGREE7119K21011
SA-3655 inANGLE: EQUAL 1.5" X 1.5" X 0.25"L 1.5 x 1.5 x 1/4 - 54.212
ASSY: FWKO TO PUMP FOR 48" ENCLOSED FLARE SKID1800400-0713
Aluminum 6061CONNECTOR: Hazardous Location, 1/2"7862T31014
Aluminum 6061Conduit Access Port, 1/2", TEE7153K81015
SA-105ELBOW: 1" 3000# - 90° - THD26
SA-105ELBOW: 3" X 0.216WT SCH 40 STD - 90° L.R.ELL3STD90WLR17
SA-105ELBOW: 3/4" 3000# - 90° - THD58
ENCLOSED FLARE - 48" OD X 20'-0"320048019
Aluminum 6061FLAME ARRESTOR INLINE: 3" THD110
FUEL GAS SCRUBBER W/ PIPING5000302111
LEVEL CONTROL SWITCH: PNEUMATIC7400-2T112
SA-53BNIPPLE: 1" X 2"N12XH113
SA-53BNIPPLE: 1/2" X 2"214
SA 53 E/B3.5 inPIPE: 1.05 OD x 0.113 W.T., SCH 40, ASME, THD.P1S40TC115
SA-53 E/B10.5 inPIPE: 3" ND, SCH 40, THD ENDSP3S40PE116
SA-53 E/B12 inPIPE: 1" ND X 0.133WT SCH 40, ERW - ANSI B36.10117
SA-53 E/B57 inPIPE: 1" ND X 0.133WT SCH 40, ERW - ANSI B36.10118
SA-53 E/B11-1/8 inPIPE: 3" ND X 0.216WT SCH 40, ERW - ANSI B36.10 THD.119
SA-53 E/B8.5 inPIPE: 3" ND X 0.216WT SCH 40, ERW, ASME B36.10, THD120
SA-53 E/B12.750 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.121
SA-53 E/B10 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.122
SA-53 E/B15.85 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.123
SA-53 E/B3 inPIPE: 3/4" ND X 0.113WT SCH 40, ERW - ANSI B36.10 THD.124
Stainless Steel, AusteniticParker A-Lok Male Taper Thread - 90° Elbow - Fractional Tube 1/4 x 1/4225
SIGHT GLASS ASSEMBLY - 12T - 12" LG 250#1800700GC1/2250126
SS 304LSIGHT: PEEP 4" X 3"127
SKID: 6'-0" X 12'-0" 48" OD ENCLOSED FLARE1100480 612128
GenericSOLENOID: ASCO 3/2, Stainless Steel, Low Watt, 12VDC, 0.55W,
Explosion Proof with vent screen.
EF8314H301129
SUREFIRE 40W SOLAR PANEL/ENCLOSURE ASSEMBLY1300400130
PolytetrafluoroethyleneTEADIT 24B 1/2" EXPANDED PTFE SEALANT3200480-04131
SA-105UNION 3-4in THD 3000#GJU3/43M132
SA-105UNION: HAMMER 3" FIG 200 THD4513K313HU3F200233
VERTICAL FWKO: 16" OD X 36" S/S - ENCLOSED FLARE1402000134
1/4 1/4
1031
4
1421
2
2461
4
331
4
301
4
31
9
30
10
625
8
685
8

3. 1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
3 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI
72
144
253
4
10
12 36
45
6
611
8
36
367
8
11
9
3
30
28

4. PN: 1800400-07
DESC: ASSY: FWKO TO PUMP FOR 48" ENCLOSED FLARE SKID
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
4 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI
PARTS LIST
INVENTORY#MATERIALLENGTHDESCRIPTIONPART NUMBERQTYITEM
VERSA1CSPUMP: 1" Elima-Matic Bolted Metal – ATEXE1CC5R55911
ANG2X2X1/4SA36SA 365 inANGLE: AISC - L 2 x 2 x 1/422
N16XHSA 53 E/BNIPPLE: 1" X 6"23
HU1F200SA 105UNION: HAMMER 1" FIG 200 THD14
N1CLXHSA 53 E/BNIPPLE: 1" X CL15
SA 105ELBOW: 1" 3000# - 90° - THD16
N13XHSA 53 E/BNIPPLE: 1" X 3"17
Brass, Soft YellowVALVE: 1" 2000# BALL W/Lockable Lever Handle18
19
7
1
2
3
483
6

5. 1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
5 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI
10
30
9

6. PN: 1300400
DESC: SUREFIRE 40W SOLAR PANEL/ENCLOSURE ASSEMBLY
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
6 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI
PARTS LIST
MATERIALLENGTHDESCRIPTIONPART NUMBERSTOCK NUMBERQTYITEM
PC/ABS Plastic1/2" Liquid-Tight Flexible Plastic Fitting75145K43011
SA-3655 inANGLE: EQUAL 1.5" X 1.5" X 0.25"L 1.5 x 1.5 x 1/4 - 54.212
GenericBATTERY: 12V 200AH13
BMS: 12" X 10" X 6" PREMIUM ENCLOSUREH12106HFLL14
Steel, MildBOLT: HEX 1/4-20 UNC - 0.7545
SA-234 WPBCAP: 2" ND X 0.154WT SCH 40, BW, ASME B16.916
SA-234 WPBCOUPLING: HALF - 2 - 3000#HCPL23M17
HINGE ASSY18
Steel, MildNUT: ANSI B18.6.3 - 5/16 - 1849
Steel, MildNUT: HEX 1/4"410
SA-53 E/B41.5 inPIPE: 2" ND X 0.154WT SCH 40S STD - ANSI B36.19111
SA-53 E/B53 inPIPE: 2" ND X 0.154WT SCH 40S STD - ANSI B36.19112
SA-36SUPPORT FOR CONTROL PANEL, 12" X 16" X 1/4"1300100-13PLT1/4SA-36113
SUREFIRE BATTERY BOX: Type 3R Enclosure, Hng CoverA12R126HCR114
Solar Panel 10W CSW-SM10WP12115
ZincU-BOLT, CLAMPING: Zinc Plated Steel, 5/16"-18 Thread Size, 2-5/8" ID3042T920116
Steel, AlloyU-BOLT: 5/16"-18 Thread Size, 2 1/2" ID, 3 3/16" Height3201T190217
431
2
541
4
6
11
12
8
14
7
15

7. 1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
7 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI

8. 1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
GENERAL:
1. ALL VISUAL INSPECTIONS BUILT IN ACCORDANCE TO ASME
SEC. VIII, DIV I, 2013 EDITION.
STAMPED: YES X NO
2. HYDROSTATIC TESTING @ 60 PSI PSI
3. ALL WELDS WILL BE ADHERED TO WPFC-SA 702410, WPSPRAY
701810 WPSAW-1
4. VERIFY NAMEPLATE INFORMATION
5. ALL DIMENSIONS ARE IN INCHES
6. FLANGE BOLT HOLES TO STRADDLE NATURAL CENTER LINES
UNLESS OTHERWISE NOTED.
7. NOZZLE PROJECTIONS ARE FROM OUTSIDE OF VESSEL TO FACE
OF FITTING U.N.O.
8. VESSEL TO BE CLEANED AND DRAINED BEFORE SHIPPING.
9. VESSEL TO BE SHOP INSPECTED.
PRG 9/22/2015
8 OF 8
HCVDC4820 ENCLOSED FLARE: 48" OD x 20'-0" FINAL
5000480
BUILT:
S/N:
MAWP:
SHPG.WT:
°F
15
50 PSI 200
6849.3LBS
TITLE:
PROJECT NO.:
MDMT: -20 ~F
DWN BY:
DWG NO:
CUSTOMER:
SHEET NO: REV NO:
APPROVED: DATE:
CERTIFIED BY
BIRD EQUIPMENT LLC
W NOBLE, OK. 405-872-8340
PSI AT
AT PSI