This document is a repair manual for New Holland HW305, HW305S, and HW325 self-propelled windrowers. It contains sections covering general information, the engine, front mechanical drive, hydrostatic transmission, brakes and controls, hydraulic systems, rear axle, climate control, electrical systems, header attachments, optional equipment, and the platform, cab and decals. The sections provide specifications and instructions for repairing and servicing the various systems of the windrowers. Dimensional specifications of the windrowers are also included.
This document is the repair manual contents page for Case IH DX23 and DX26 tractors. It lists the sections and chapters contained within the repair manual, including the engine, transmission, brakes, hydraulics, steering, electrical systems, and other components. Safety precautions are provided at the beginning for servicing and operating the tractors. The document also includes specifications, dimensions, torque values, and other technical information for the DX23 and DX26 models.
New holland ts100 a tractor service repair manualufjjjskekemme
This document is a service manual that provides instructions for separating and removing various components of TS-A series tractors, including the front axle, engine, transmission, and cab. It lists torque specifications and required special tools for each job. The document consists of 6 chapters that describe procedures for separating the front axle from the engine, separating the engine from the transmission, separating the entire drivetrain from the rear axle, removing the engine, removing the transmission, and removing the cab. Diagrams and step-by-step instructions are provided to guide technicians through each removal and reinstallation process.
New holland tm120 tractor service repair manualufjjsjkfkmsem
This document is a repair manual that provides instructions for servicing TM120, TM130, TM140, TM155, TM175, and TM190 tractors. It contains sections covering the general information, engine, clutch, transmission, drivelines, front and rear axles, brakes, hydraulics, steering, electrical systems, and cab. Safety precautions and maintenance instructions are provided throughout. The manual is intended solely for use by authorized service technicians according to the repair procedures outlined.
The document provides information about keys, steering wheel locks, security systems, door locks, windows, rear swing gates, occupant restraints like seat belts and airbags, engine break-in recommendations, and safety tips for a vehicle. It covers topics like using the ignition key and steering wheel lock, setting vehicle security alarms, operating power door locks and windows, using seat belts and child restraints, and checks that should be made inside and outside the vehicle.
New holland tt55 tractor service repair manualufdjjsjekkemme
This document is a repair manual for New Holland TT55 and TT75 tractors. It provides detailed instructions and specifications for overhauling various engine systems, including the engine, lubrication system, coolant system, and fuel system. The manual contains sections covering the removal and installation of the engine, disassembly and assembly procedures, inspection and repair of engine components, specifications and torque values. It is intended to guide authorized repair technicians in properly servicing and maintaining the tractor engines.
John deere 4100 compact utility tractor service repair manualudjjjskekdmm
This technical manual provides information on servicing and repairing 4100 Compact Utility Tractors with 4100 gear drive and hydrostatic drive systems. The manual contains sections covering specifications, component locations, theory of operation, troubleshooting, diagnosis, and repair procedures. It is intended as a resource for experienced technicians to service these tractor models.
John deere 4200 compact utility tractor service repair manualudjjjskekdmm
This technical manual provides specifications, operation instructions, troubleshooting information, and repair procedures for John Deere 4200, 4300, and 4400 compact utility tractor diesel engines. The manual is organized into sections covering specifications, theory of operation for fuel, cooling, and lubrication systems, troubleshooting charts, tests and adjustments for components like valves and injection pumps, and repair procedures for engine overhaul. Safety information is provided throughout, including hazards from high pressure fluids, battery explosions, and working in confined spaces.
John deere 655 compact utility tractor service repair manualfjjskedmme
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains repair and diagnostic sections divided into various systems like the diesel engine, fuel system, alternator, power train, steering, brakes, hydraulics and other components. Safety precautions and specifications are provided at the beginning along with information on recommended fuels, lubricants, coolants and storage procedures. Component locations like the product serial number and engine serial number are also included.
This document is the repair manual contents page for Case IH DX23 and DX26 tractors. It lists the sections and chapters contained within the repair manual, including the engine, transmission, brakes, hydraulics, steering, electrical systems, and other components. Safety precautions are provided at the beginning for servicing and operating the tractors. The document also includes specifications, dimensions, torque values, and other technical information for the DX23 and DX26 models.
New holland ts100 a tractor service repair manualufjjjskekemme
This document is a service manual that provides instructions for separating and removing various components of TS-A series tractors, including the front axle, engine, transmission, and cab. It lists torque specifications and required special tools for each job. The document consists of 6 chapters that describe procedures for separating the front axle from the engine, separating the engine from the transmission, separating the entire drivetrain from the rear axle, removing the engine, removing the transmission, and removing the cab. Diagrams and step-by-step instructions are provided to guide technicians through each removal and reinstallation process.
New holland tm120 tractor service repair manualufjjsjkfkmsem
This document is a repair manual that provides instructions for servicing TM120, TM130, TM140, TM155, TM175, and TM190 tractors. It contains sections covering the general information, engine, clutch, transmission, drivelines, front and rear axles, brakes, hydraulics, steering, electrical systems, and cab. Safety precautions and maintenance instructions are provided throughout. The manual is intended solely for use by authorized service technicians according to the repair procedures outlined.
The document provides information about keys, steering wheel locks, security systems, door locks, windows, rear swing gates, occupant restraints like seat belts and airbags, engine break-in recommendations, and safety tips for a vehicle. It covers topics like using the ignition key and steering wheel lock, setting vehicle security alarms, operating power door locks and windows, using seat belts and child restraints, and checks that should be made inside and outside the vehicle.
New holland tt55 tractor service repair manualufdjjsjekkemme
This document is a repair manual for New Holland TT55 and TT75 tractors. It provides detailed instructions and specifications for overhauling various engine systems, including the engine, lubrication system, coolant system, and fuel system. The manual contains sections covering the removal and installation of the engine, disassembly and assembly procedures, inspection and repair of engine components, specifications and torque values. It is intended to guide authorized repair technicians in properly servicing and maintaining the tractor engines.
John deere 4100 compact utility tractor service repair manualudjjjskekdmm
This technical manual provides information on servicing and repairing 4100 Compact Utility Tractors with 4100 gear drive and hydrostatic drive systems. The manual contains sections covering specifications, component locations, theory of operation, troubleshooting, diagnosis, and repair procedures. It is intended as a resource for experienced technicians to service these tractor models.
John deere 4200 compact utility tractor service repair manualudjjjskekdmm
This technical manual provides specifications, operation instructions, troubleshooting information, and repair procedures for John Deere 4200, 4300, and 4400 compact utility tractor diesel engines. The manual is organized into sections covering specifications, theory of operation for fuel, cooling, and lubrication systems, troubleshooting charts, tests and adjustments for components like valves and injection pumps, and repair procedures for engine overhaul. Safety information is provided throughout, including hazards from high pressure fluids, battery explosions, and working in confined spaces.
John deere 655 compact utility tractor service repair manualfjjskedmme
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains repair and diagnostic sections divided into various systems like the diesel engine, fuel system, alternator, power train, steering, brakes, hydraulics and other components. Safety precautions and specifications are provided at the beginning along with information on recommended fuels, lubricants, coolants and storage procedures. Component locations like the product serial number and engine serial number are also included.
Toro reelmaster 7000 mower service repair manualfskkkdjskemd
This document provides safety instructions for operating, maintaining, and servicing the Reelmaster 7000. It outlines general safety practices including wearing proper protective equipment and following safety decals/symbols. Specific safety instructions are provided for before operating, while operating, and maintenance/service of the machine. Jacking instructions and locations of safety decals are also included.
Toro pro sweep (model 07066) service repair manualfskkkdjskemd
This document is a service manual for the Pro Sweep model 07066. It provides information for technicians to troubleshoot, test, and repair major systems and components of the Pro Sweep. The manual contains chapters covering safety, product records and maintenance, hydraulic and electrical systems, chassis, and electrical diagrams. Technicians are instructed to follow all safety procedures when servicing equipment to prevent injury.
Toro groundsmaster 4010 d (model 30446) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Toro groundsmaster 4000 d (model 30448) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Takeuchi tl140 crawler loader parts catalogue manual (sn 21400011 and up)fskkkdjskemd
This document provides a parts list and references for a TL140 excavator with serial number 21400011-. It includes 28 items related to the piping for the operation lever for serial numbers 21400011-21401390. The parts are numbered and include descriptions, quantities, and part numbers. Reference pages are provided at the end of each section.
Takeuchi tl120 crawler loader parts catalogue manual (sn 21200008 and up)fskkkdjskemd
This document provides a parts list for a TL120 excavator. It contains 84 items describing various engine, undercarriage, and structural parts along with their part numbers, descriptions, quantities, and other details. The parts are grouped into sections covering the engine and accessories, undercarriage, frame, hydraulic and electrical systems, covers and attachments. The document includes references to other parts manuals and serves as an index of replaceable components for the excavator.
Takeuchi tb175 compact excavator parts catalogue manual (sn 17510003 and up)fskkkdjskemd
This document provides parts information for a TB175 excavator. It includes exploded diagrams and part lists for the lower frame, crawler belt, carrier rollers, track rollers, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. The parts are identified by part number, description, and quantity. Serial numbers are provided for some parts to indicate applicability.
Takeuchi tb125 compact excavator parts catalogue manual (sn 12510009 and up)fskkkdjskemd
The document provides parts information for a TB125 excavator with serial number 12510009-. It includes sections for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories. Each section lists the relevant parts, quantities, part numbers, and other details.
Takeuchi tb025 compact excavator parts catalogue manual (sn 1255001 1258249)fskkkdjskemd
This document is a parts manual for a crawler excavator that includes exploded diagrams and lists of parts for various assemblies. It provides the part numbers, descriptions, quantities, and reference pages for components such as the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, dozer blade, and other assemblies. Serial numbers covered are 1255001-1258249.
Massey ferguson mf 535 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 530 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 525 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 520 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 506 combine parts catalogue manualfskkkdjskemd
The document contains parts lists and technical specifications for the Massey Ferguson MF 506 combine harvester. It lists parts for different components of the combine, including knives of various lengths (8', 10', 12'), the knife drive system, the drive box, and an 8' drive shaft. Each component section includes an item number, part number, quantity, part description, and sometimes additional comments. The purpose is to provide the parts and details needed to service and repair the MF 506 combine.
Massey ferguson mf 487 combine parts catalogue manualfskkkdjskemd
This document provides parts listings and descriptions for various components of a Massey Ferguson MF 487 combine, including 8', 10', and 12' knives and their associated parts, the knife drive systems, and the combine reel components. The listings include part numbers, quantities, descriptions, and other identifying information for each component. References to additional pages provide more details on specific parts like the wobble drive component.
Massey ferguson mf 440 combine parts catalogue manualfskkkdjskemd
This document provides a list of parts for a Massey Ferguson MF 440 combine. It includes over 150 individual part items or assemblies for the engine, cylinder block, crankshaft, cylinder head, air induction, and other systems. Each part is listed with its number, quantity, description, and any relevant comments. The level of detail in the parts list indicates it is intended for maintenance and repair of the MF 440 combine.
Massey ferguson mf 410 combine (fr) parts catalogue manualfskkkdjskemd
This document contains parts listings and descriptions for components of a Massey Ferguson MF 410 combine harvester, including:
- The knife and knife drive arrangement, listing 21 parts such as nuts, bearings, pulleys, and knives.
- The knife drive box, listing 33 parts such as seals, bearings, pins, shafts, and housings.
- The reel rear shaft and variator, listing 53 parts such as bearings, pulleys, sprockets, belts, brackets, springs, and housings.
- The reel arms and pulleys, listing 41 parts including arms, pulleys, bearings, belts, springs, bushes, and carriers.
Massey ferguson mf 399 tractor, a6.354.4 engine parts catalogue manualfskkkdjskemd
The document provides parts information for a Massey Ferguson MF 399 tractor with an A6.354.4 engine and serial number 819753. It includes 5 pages detailing over 80 individual parts that make up the engine, cylinder block, crankshaft, pistons, cylinder head, and other components. Each part is listed with its number, quantity used, description, and any relevant comments.
The document appears to be a parts list for a Massey Ferguson MF 374 VQ cab tractor from 1995. It contains over 60 items with part numbers, descriptions, quantities and other details. The list is organized into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. Each item has additional information on fit, finish, thickness and quantity depending on the number of tractors sold.
Massey ferguson mf 374 aq cab tractor parts catalogue manualfskkkdjskemd
This document contains parts listings and technical specifications for components of a Massey Ferguson MF 374 AQ cab tractor, including the engine. It lists over 60 individual parts that make up the engine assembly, cylinder block, crankshaft, pistons, cylinder head and other engine components. Each part is identified by number, description, quantity used, and other technical details. The document also includes explanatory notes on part numbers, fitment, and quantities applicable to different production volumes.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Toro reelmaster 7000 mower service repair manualfskkkdjskemd
This document provides safety instructions for operating, maintaining, and servicing the Reelmaster 7000. It outlines general safety practices including wearing proper protective equipment and following safety decals/symbols. Specific safety instructions are provided for before operating, while operating, and maintenance/service of the machine. Jacking instructions and locations of safety decals are also included.
Toro pro sweep (model 07066) service repair manualfskkkdjskemd
This document is a service manual for the Pro Sweep model 07066. It provides information for technicians to troubleshoot, test, and repair major systems and components of the Pro Sweep. The manual contains chapters covering safety, product records and maintenance, hydraulic and electrical systems, chassis, and electrical diagrams. Technicians are instructed to follow all safety procedures when servicing equipment to prevent injury.
Toro groundsmaster 4010 d (model 30446) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Toro groundsmaster 4000 d (model 30448) service repair manualfskkkdjskemd
This document is a service manual for the Groundsmaster 4000-D and 4010-D. It contains 10 chapters that cover safety procedures, product records and maintenance, the Kubota diesel engine, hydraulic system, electrical system, axles/brakes, chassis, cutting decks, operator cab, and foldout diagrams. The manual provides service technicians with information for troubleshooting, testing, and repairing major systems and components.
Takeuchi tl140 crawler loader parts catalogue manual (sn 21400011 and up)fskkkdjskemd
This document provides a parts list and references for a TL140 excavator with serial number 21400011-. It includes 28 items related to the piping for the operation lever for serial numbers 21400011-21401390. The parts are numbered and include descriptions, quantities, and part numbers. Reference pages are provided at the end of each section.
Takeuchi tl120 crawler loader parts catalogue manual (sn 21200008 and up)fskkkdjskemd
This document provides a parts list for a TL120 excavator. It contains 84 items describing various engine, undercarriage, and structural parts along with their part numbers, descriptions, quantities, and other details. The parts are grouped into sections covering the engine and accessories, undercarriage, frame, hydraulic and electrical systems, covers and attachments. The document includes references to other parts manuals and serves as an index of replaceable components for the excavator.
Takeuchi tb175 compact excavator parts catalogue manual (sn 17510003 and up)fskkkdjskemd
This document provides parts information for a TB175 excavator. It includes exploded diagrams and part lists for the lower frame, crawler belt, carrier rollers, track rollers, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. The parts are identified by part number, description, and quantity. Serial numbers are provided for some parts to indicate applicability.
Takeuchi tb125 compact excavator parts catalogue manual (sn 12510009 and up)fskkkdjskemd
The document provides parts information for a TB125 excavator with serial number 12510009-. It includes sections for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories. Each section lists the relevant parts, quantities, part numbers, and other details.
Takeuchi tb025 compact excavator parts catalogue manual (sn 1255001 1258249)fskkkdjskemd
This document is a parts manual for a crawler excavator that includes exploded diagrams and lists of parts for various assemblies. It provides the part numbers, descriptions, quantities, and reference pages for components such as the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, dozer blade, and other assemblies. Serial numbers covered are 1255001-1258249.
Massey ferguson mf 535 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 530 combines ( 1115200) parts catalogue manualfskkkdjskemd
This document contains parts lists and descriptions for various components of Massey Ferguson MF 530/535 combines, including the engine and accessories, cylinder block, crankshaft, cylinder head, and cylinder head cover. It lists part numbers, quantities, descriptions, and other details for over 60 individual parts across these systems. Reference numbers and page numbers are provided at the bottom of each section.
Massey ferguson mf 525 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 520 combines parts catalogue manual part no. 819611fskkkdjskemd
This document provides the parts list and descriptions for a Massey Ferguson MF 520/525 combine cylinder head cover with 72 items numbered and described. It includes the part numbers, quantities, descriptions and any relevant comments on the parts that make up the cylinder head cover and its components. Serial numbers are referenced for some part applicability.
Massey ferguson mf 506 combine parts catalogue manualfskkkdjskemd
The document contains parts lists and technical specifications for the Massey Ferguson MF 506 combine harvester. It lists parts for different components of the combine, including knives of various lengths (8', 10', 12'), the knife drive system, the drive box, and an 8' drive shaft. Each component section includes an item number, part number, quantity, part description, and sometimes additional comments. The purpose is to provide the parts and details needed to service and repair the MF 506 combine.
Massey ferguson mf 487 combine parts catalogue manualfskkkdjskemd
This document provides parts listings and descriptions for various components of a Massey Ferguson MF 487 combine, including 8', 10', and 12' knives and their associated parts, the knife drive systems, and the combine reel components. The listings include part numbers, quantities, descriptions, and other identifying information for each component. References to additional pages provide more details on specific parts like the wobble drive component.
Massey ferguson mf 440 combine parts catalogue manualfskkkdjskemd
This document provides a list of parts for a Massey Ferguson MF 440 combine. It includes over 150 individual part items or assemblies for the engine, cylinder block, crankshaft, cylinder head, air induction, and other systems. Each part is listed with its number, quantity, description, and any relevant comments. The level of detail in the parts list indicates it is intended for maintenance and repair of the MF 440 combine.
Massey ferguson mf 410 combine (fr) parts catalogue manualfskkkdjskemd
This document contains parts listings and descriptions for components of a Massey Ferguson MF 410 combine harvester, including:
- The knife and knife drive arrangement, listing 21 parts such as nuts, bearings, pulleys, and knives.
- The knife drive box, listing 33 parts such as seals, bearings, pins, shafts, and housings.
- The reel rear shaft and variator, listing 53 parts such as bearings, pulleys, sprockets, belts, brackets, springs, and housings.
- The reel arms and pulleys, listing 41 parts including arms, pulleys, bearings, belts, springs, bushes, and carriers.
Massey ferguson mf 399 tractor, a6.354.4 engine parts catalogue manualfskkkdjskemd
The document provides parts information for a Massey Ferguson MF 399 tractor with an A6.354.4 engine and serial number 819753. It includes 5 pages detailing over 80 individual parts that make up the engine, cylinder block, crankshaft, pistons, cylinder head, and other components. Each part is listed with its number, quantity used, description, and any relevant comments.
The document appears to be a parts list for a Massey Ferguson MF 374 VQ cab tractor from 1995. It contains over 60 items with part numbers, descriptions, quantities and other details. The list is organized into sections for the engine assembly, short engine, cylinder block, crankshaft/pistons/connecting rods, and cylinder head. Each item has additional information on fit, finish, thickness and quantity depending on the number of tractors sold.
Massey ferguson mf 374 aq cab tractor parts catalogue manualfskkkdjskemd
This document contains parts listings and technical specifications for components of a Massey Ferguson MF 374 AQ cab tractor, including the engine. It lists over 60 individual parts that make up the engine assembly, cylinder block, crankshaft, pistons, cylinder head and other engine components. Each part is identified by number, description, quantity used, and other technical details. The document also includes explanatory notes on part numbers, fitment, and quantities applicable to different production volumes.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
3. SECTION 00 - GENERAL INFORMATION - CHAPTER 1
00-3
SAFETY
PRECAUTIONARY STATEMENTS
A careful operator is the best operator. Most accidents can be avoided by observing certain precautions. To help
prevent accidents, read the following precautions before operating this equipment. Equipment should be
operated only by those who are responsible and instructed to do so.
Carefully review the procedures given in this manual with all operators. It is important that all operators be familiar
with and follow safety precautions.
1. To stop, return the MFH lever to neutral,
engage the parking brake, center the steering
wheel to the locked position, and stop the
engine before leaving the seat.
2. When descending steep grades on the road
and when in the field, always place the switch
into the field range position.
3. When going down a steep grade, pull the MFH
lever back toward neutral to slow ground
speed.
4. With the parking brake engaged, the steering
wheel centered, and the hydrostatic MFH
lever in the neutral slot, the neutral lock will
engage pulling the lever to the right. The
parking brake must be engaged before the
engine will start.
5. The neutral lock should always be engaged
when the windrower is stopped.
6. The steering wheel must be centered to keep
the windrower from turning even with the MFH
lever in neutral. When moving forward, the
windrower turns the direction the steering
wheel is turned. When moving in reverse, the
windrower turns opposite the direction the
wheel is turned. In reverse, hold the steering
wheel at the back of the rim and move your
hand in the direction you want to go.
7. When driving the windrower on the road or
highway, use the proper accessory lights for
adequate warning to the operators of other
vehicles. Check your local government regula-
tions concerning the use of warning devices.
Work lights should not be used as they could
be mistaken for an oncoming vehicle.
8. Always use the seat belt when operating the
windrower.
9. Never idle the engine in a closed area.
Exhaust gases may build up. These gases are
harmful and potentially lethal. Carbon mon-
oxide is colorless and odorless, but can be
present with all other exhaust fumes.
10. Be sure everyone is clear of the windrower
before starting the engine.
11. When using battery jumper cables, the last
connection must be made away from the
windrower battery to avoid sparks which may
ignite battery gases and result in an
explosion and fire.
12. Batteries normally produce explosive gases
which can cause personal injury. Therefore
do not allow flames, sparks, or lighted
tobacco to come near the batteries. Always
shield your eyes when charging or working
near a battery. Always provide ventilation.
13. When lifting a plastic cased battery, exces-
sive pressure on the end wall could cause
acid to spew through the vent caps, resulting
in personal injury. Lift a plastic cased battery
with a battery carrier or with your hands on
opposite corners of the battery.
14. Batteries contain sulfuric acid. In case of
contact with skin, flush the affected area with
water for five minutes. Seek medical atten-
tion immediately. Avoid contact with the skin,
eyes or clothing. Wear eye protection when
working near batteries.
15. Keep batteries out of reach of children.
Batteries contain sulfuric acid. Avoid contact
with skin, eyes or clothing. Shield your eyes
when working near the batteries to protect
against possible splashing of the acid solution.
In case of acid contact with skin or eyes, flush
immediately with water fro a minimum of fifteen
minutes and get prompt medical attention. If
acid is swallowed, call a physician immediately.
16. Header locks are built into the header lift
system to lock the header in the raised
position. Lock the header on both sides
before working under a raised header.
4. SECTION 00 - GENERAL INFORMATION - CHAPTER 1
00-4
17. When the wheel caps are turned to the towing
position (dimples in), there are no brakes, there
will be absolutely no control of the unit from the
cab. Tow only a short distance at a slow speed.
18. Be careful when driving the windrower
without the header. It responds much more
quickly than with the header installed.
19. When hauling the windrower on a road or
highway, check your local government
regulations concerning the use of proper
warning devices and the necessity of a
hauling permit.
20. Never make any adjustments or attempt to
unplug the header with the engine running.
Disengage the header drive, lower or lock the
header up, shut off the engine, and engage
the parking brake before attempting any
adjustments or trying to unplug the header.
21. After the first one, five, and twenty hours use,
check for loose wheel bolts. Tighten the bolts
as outlined in “Before Operating”, at the
beginning of this section.
22. If stones and other foreign objects are carried
into the conditioner rolls, the objects can be
thrown toward the operator, possibly result-
ing in physical injury.
23. Raise the header and engage the lift locks
before adjusting the skid shoes.
24. Some illustrations in this manual show
shields removed to show the parts being
serviced. Replace all shields before running
the machine.
25. Never operate the windrower engine while it
is being refueled. Do not smoke in the
refueling area.
26. Be very careful to avoid contact with hot
engine oil. If engine is extremely hot, allow oil
to cool to a moderately warm temperature
before proceeding.
27. Do not start the machine with any of these
cleaners in the system or damage will result.
28. Whenever jacking under the main drive
wheels, be sure the machine is on level
ground and securely blocked to prevent the
tail wheels from swiveling.
29. It is dangerous to remove the radiator cap while
the system is hot because the system is under
pressure. Let the system cool or turn the cap
slowly to the first stop and allow the pressure
to escape before removing the cap completely.
30. Do not tap any filter element against any hard
surface as it will be damaged or distorted.
31. Diesel fuel escaping under pressure can
penetrate the skin causing serious injury.
32. The air conditioning system contains envi-
ronmentally safe HFC 134a refrigerant. This
system is not compatible with R12 refrigerant
and the components are different. Gauges
and test equipment must not be used with
R12 or damage to the system will result.
33. Fluid under pressure can have sufficient
force to penetrate the skin, causing serious
personal injury. Always protect the skin and
eyes from escaping fluid under pressure.
34. Before disconnecting lines or fittings, be
sure to relieve all pressure. Before applying
pressure to the system, be sure that all
connections are tight and that lines, pipes,
and hoses are not damaged.
35. If injured by escaping fluid, obtain medical
assistance at once. Serious infection or
reaction can develop if medical treatment is
not administered immediately.
36. Relief valves in the hydrostatic drive system
and in the header drive system are not
adjustable. They should not be tampered
with. Check with your dealer’s service
department if you have problems with the
hydraulic or hydrostatic system.
37. Because of the high pressure in the hydraulic
system, use only genuine factory parts and
hoses for repairing these systems.
38. If welding must be performed on either the
tractor or the attached header, the battery
ground strap must be disconnected from the
battery or damage may result in the (XCM) and
other electrical components. Reinstall the
battery ground strap when welding is
complete.
39. When adjusting the drag on the MFH lever,
always lock the jam nuts together once this
adjustment is completed. Failure to do so
could lock the MFH handle.
40. Never use either starting fluid with thermo-
start. An explosion would result that would
severe damage to the engine.
5. SECTION 00 - GENERAL INFORMATION - CHAPTER 1
00-21
10041205
1
2
5
3
4
6
7
8
7
16.9 x 24 tires Model HW305, 305S
1. Length of unit w/ header & lift arms 4984 mm (196.2 in.)
2. Length of unit less header & lift arms -- HW305/305S 5035 mm (198.2 in.)
3. Height 3307 mm (130.2 in.)
4. Frame clearance (front) 1050 mm (41.3 in.)
5. Wheelbase 3419 mm (134.6 in.)
6. Front tread width (center to center) 3186 mm (125.4 in.)
7. Rear axle clearance (spindle to spindle) 2286 -- 3048 mm
(90 -- 120 in.)
8. Rear axle clearance 860 mm (33.8 in.)
6. SECTION 00 - GENERAL INFORMATION - CHAPTER 1
00-22
10041205
1
2
5
3
4
6
7
8
8
18.4 x 26 tires Model HW305, 305S, 325
1. Length of unit w/ header & lift arms 4984 mm (196.2 in.)
2. Length of unit less header & lift arms -- HW325 5060 mm (199.2 in.)
Length of unit less header & lift arms -- HW305/305S 5035 mm (198.2 in.)
3. Height 3372 mm (132.8 in.)
4. Frame clearance (front) 1144 mm (45 in.)
5. Wheelbase 3419 mm (134.6 in.)
6. Front tread width (center to center) 3335 mm (131.3 in.)
7. Rear axle clearance (spindle to spindle) 2286 -- 3048 mm
(90 -- 120 in.)
8. Rear axle clearance 922 mm (36.3 in.)
11. SECTION 10 -- ENGINE -- CHAPTER 1
10-5
ENGINE OVERHAUL INTRODUCTION
This engine overhaul procedure will describe how to repair the engine. It is up to the mechanic to decide which
sections are required for each particular problem. The following associated systems of the engine are located
in different chapters:
Section 55, Chapter 5 – Engine Electrical System
Chapter 2 – Fuel and Injection System
Chapter 3 -- Air Intake System
Chapter 4 – Engine Coolant System
The water pump is covered in this section.
Chapter 5 – Lubrication System
Most of the repair for these areas can be done with the engine mounted in the windrower.
F4GE0484G
F4GE0454C
1
12. SECTION 10 -- ENGINE -- CHAPTER 1
10-18
OVERHAUL
ENGINE
Removal
1. Drain coolant from radiator and engine by
opening valve, 1. Catch fluid from drain hose and
save for recycling. Remove the radiator cap to
speed up the draining, using caution if the system
is hot.
11041160
1
2
2. Remove battery ground cables by removing
starter mounting bolt, 1.
3. Remove all positive power cables from starter
terminal, 2.
4. Remove wire, 3, from starter terminal.
5. Open valve, 4, if closed, and allow any trapped
coolant to drain. Loosen clamp, 5, and remove
heater hose.
20041092 1
2
3
4
5
3
6. Loosen clamp, 1, and remove lower radiator
hose. Also, in like manner, disconnect the upper
hose.
10041138
1
4
13. SECTION 10 -- ENGINE -- CHAPTER 1
10-19
7. Using a helper, detach four gas springs, 1, from
engine area side doors by removing four flange
nuts and lock washers.
8. Remove side doors by removing one bolt, 2, and
loosening one, 3, at each of twelve pivot clips, 4.
9. Remove two carriage bolts, lock washers and
flange nuts, 5, on each side of hood support
frame.
50041836
1
2
3
4
5
5
10. On HW305S and HW325, loosen spring clamps,
1, and remove tubing from turbo to intercooler,
and from intercooler to intake manifold.
11. Loosen clamps and remove 102 mm (4″)
diameter tubing, 2, from air cleaner to rear
bulkhead.
10050472
1
2
6
12. Remove nut and lock washer, 1, on ball joint at
end of control cable.
13. Push off clip, 2, and remove fuel return hose with
elbow attached. Likewise push off clip, 3, on fuel
supply hose. Plug and bag the end of these
hoses to keep out contamination.
14. Disconnect wire, 4, from fuel injection pump.
50041851 4
3
1
2
7
14. SECTION 10 -- ENGINE -- CHAPTER 1
10-20
15. Loosen pipe clamp, 1, and remove exhaust
stack, 2.
16. Disconnect restriction indicator wire, 3.
17. Loosen clamp, 4, and remove hose from air
cleaner.
18. Loosen clamp and remove air cleaner evacuator
hose at muffler outlet, 5.
19. Remove one 5/16 in. bolt, 6.
20. Remove two M8 cap screws and lock washers,
7, and move air cleaner to one side with mounting
bracket and cable still attached. 50050468 7
4
1
2
3
6 5
8
21. Remove four flange bolts, lock washers and
flange nuts, 1, to detach hood support frame from
radiator side supports. Frame can now be
removed with roof panel attached.
50041834
1
9
22. Disconnect wire harness at both sides of intake
air heater, 1, if so equipped, and at oil pressure
switch, 2.
40045395
2
1
10
15. SECTION 10 -- ENGINE -- CHAPTER 1
10-21
23. Disconnect wire connector, 1, and wire at
temperature sensor, 2.
24. On models HW305 & HW305S, remove two
bolts, 3, from feet of compressor, and long pivot
bolt, 4, remove drive belt and lay compressor
over to right side of machine with hoses
connected.
50044518
3
4
2
1
11
25. On model HW325, remove two 5/16 X 3-3/4″ cap
screws with lock washers and flange nuts, 1,
from lower holes in compressor and through
lower mount casting.
26. Remove one 3/8 X5″ long pivot bolt with lock
washer and lock nut, 2, remove drive belt and lay
compressor over to right side of machine with
hoses connected.
50050474
21
12
27. If equipped with auxiliary pump, remove two hex
head flange bolts and lock washers, 1, to remove
pump with PTO drive and hoses attached. Lay
over to right side of windrower frame. Save
gasket for re-use when reinstalling.
40044943
1
13
16. SECTION 10 -- ENGINE -- CHAPTER 1
10-22
28. Remove four nuts and lock washers, 1, to
remove rear cover, 2.
10050470
1
2
14
29. Disconnect cable, 1, and two wires of harness, 2,
from alternator by removing three nuts. Screw
these nuts on the terminals loosely to save for
later use.
30. Remove and loosen clamps as necessary to free
wiring harness and cables from engine.
10050471
2
1
15
31. Remove plug, 1, to drain oil from gear box.
32. With adequate support provided for the pumps,
remove twelve flange bolts, 2.
2
1
16
17. SECTION 10 -- ENGINE -- CHAPTER 1
10-23
33. There are three tapped holes, 1, in periphery of
cover plate that are provided for removal
purposes. Use three of the bolts removed in
previous step and thread into tapped holes to
push plate away from flywheel housing.
NOTE: The holes are tapped with M10X1.5 threads.
Do not attempt to use inch series bolts, as thread
damage will occur.
34. Pull cover plate with pumps attached forward so
that drive gears clear the flywheel housing.
Support from above to avoid damage to hoses
and fittings.
10041140
1
17
35. It may be necessary to loosen clamp bolts, 1, in
steering yoke and remove from splined shaft, 2.
10041124
2
1
18
36. Remove four large cap screws with lock nuts, 1.
37. Use appropriate lifting equipment to lift engine
out of machine.
38. Mount the engine to an engine stand before
removing the chain and hoist.
‘0041193
1
19
18. SECTION 10 -- ENGINE -- CHAPTER 1
10-24
TURBOCHARGER
Removal
1. Remove the oil line, 1, from the top of the
turbocharger. Remove two bolts from flange of oil
return tube.
2. Remove the four nuts, 2, from the studs.
3. Lift the turbocharger off the studs. There is a
gasket between the turbocharger and the
exhaust manifold, and another gasket at the
return tube flange.
75675
1
2
2
20
FUEL SYSTEM
Removal
4. Remove all the fuel lines from the injector pump
to the injectors.
5. Remove the mounting brackets for the fuel lines.
6. Remove the four fuel lines from the injectors, at
1.
7. Remove the four fuel lines from the injector
pump.
8. Remove the injector return line from the injector
pump and the injectors.
20052029
1
1
21
9. Take the vacuum line, 1, loose from the injector
pump and the engine.
20052040
1
22
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. SECTION 10 -- ENGINE -- CHAPTER 1
10-25
10. Remove the fuel return line, 1, from all the
injectors, 2.
11. Remove the bolt, 3. Save the double gasket, 4.
10041033
1
2 3
4
23
12. A tool, 1, part number 380000982, is available to
break loose the injector, 2. Remove the injectors.
20041034
1
2
24
13. Remove the fuel pump, 1.
10041020
1
25
21. SECTION 10 -- ENGINE -- CHAPTER 1
10-26
14. Leave the wire harness, 1, on the injector pump,
2.
10041023
1
2
26
15. Disconnect the harness, at 1. View is from
underneath the injector pump, 2.
10041030
3
2
27
16. Cut the plastic tie, 1. Do not damage the tie
holder that is pressed into the engine block. Pull
the tie out of the holder.
17. Take the wire harness off the engine temperature
sensor, 2.
10041031
1
2
28
22. SECTION 10 -- ENGINE -- CHAPTER 1
10-27
18. A pin, 1, is located under and on the engine side
of the injector pump, 2.
10041030
2
1
29
19. Rotate the engine by rotating the pulley, 1.
IMPORTANT: Rotate the engine slowly or the plastic
pin may be sheared off.
86572
1
30
20. Insert the plastic pin, 1, as the engine is rotated.
21. The pin must seat in the hole in the gear, 2, on the
cam shaft.
NOTE: The injector pump is timed to the engine.
Even if the engine is to be torn down completely, the
injector pump must be locked at the TDC position.
20041024
1
2
31